[ifxmips] fix atm compilation

[openwrt.git] / target / linux / xburst / patches-2.6.32 / 103-serial.patch

diff --git a/target/linux/xburst/patches-2.6.32/103-serial.patch b/target/linux/xburst/patches-2.6.32/103-serial.patch
index 2401248..2810631 100644 (file)
--- a/target/linux/xburst/patches-2.6.32/103-serial.patch
+++ b/target/linux/xburst/patches-2.6.32/103-serial.patch
@@ -9,7 +9,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
 
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -196,7 +196,7 @@ static const struct serial8250_config ua
+@@ -199,7 +199,7 @@ static const struct serial8250_config ua
        [PORT_16550A] = {
                .name           = "16550A",
                .fifo_size      = 16,
@@ -18,7 +18,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
                .flags          = UART_CAP_FIFO,
        },
-@@ -403,6 +403,10 @@ static unsigned int mem_serial_in(struct
+@@ -406,6 +406,10 @@ static unsigned int mem_serial_in(struct
  static void mem_serial_out(struct uart_port *p, int offset, int value)
  {
        offset = map_8250_out_reg(p, offset) << p->regshift;
@@ -29,7 +29,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
        writeb(value, p->membase + offset);
  }
  
-@@ -2213,6 +2217,83 @@ static void serial8250_shutdown(struct u
+@@ -2214,6 +2218,83 @@ static void serial8250_shutdown(struct u
                serial_unlink_irq_chain(up);
  }
  
@@ -113,7 +113,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
  {
        unsigned int quot;
-@@ -2232,6 +2313,7 @@ static unsigned int serial8250_get_divis
+@@ -2233,6 +2314,7 @@ static unsigned int serial8250_get_divis
  
        return quot;
  }
@@ -121,7 +121,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  
  static void
  serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
-@@ -2241,6 +2323,9 @@ serial8250_set_termios(struct uart_port 
+@@ -2242,6 +2324,9 @@ serial8250_set_termios(struct uart_port 
        unsigned char cval, fcr = 0;
        unsigned long flags;
        unsigned int baud, quot;
@@ -131,7 +131,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  
        switch (termios->c_cflag & CSIZE) {
        case CS5:
-@@ -2275,7 +2360,12 @@ serial8250_set_termios(struct uart_port 
+@@ -2276,7 +2361,12 @@ serial8250_set_termios(struct uart_port 
        baud = uart_get_baud_rate(port, termios, old,
                                  port->uartclk / 16 / 0xffff,
                                  port->uartclk / 16);
@@ -144,7 +144,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  
        /*
         * Oxford Semi 952 rev B workaround
-@@ -2353,6 +2443,10 @@ serial8250_set_termios(struct uart_port 
+@@ -2354,6 +2444,10 @@ serial8250_set_termios(struct uart_port 
        if (up->capabilities & UART_CAP_UUE)
                up->ier |= UART_IER_UUE | UART_IER_RTOIE;
  
@@ -155,7 +155,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
        serial_out(up, UART_IER, up->ier);
  
        if (up->capabilities & UART_CAP_EFR) {
-@@ -2387,7 +2481,15 @@ serial8250_set_termios(struct uart_port 
+@@ -2388,7 +2482,15 @@ serial8250_set_termios(struct uart_port 
                serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
        }