do not download kernel sources when using an external kernel tree

[openwrt.git] / package / hostapd / files / mini.config

diff --git a/package/hostapd/files/mini.config b/package/hostapd/files/mini.config
index e50fb3c..1720ddd 100644 (file)
--- a/package/hostapd/files/mini.config
+++ b/package/hostapd/files/mini.config
@@ -17,29 +17,16 @@ CONFIG_DRIVER_WIRED=y
 
 # Driver interface for madwifi driver
 CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
 
 # Driver interface for Prism54 driver
 #CONFIG_DRIVER_PRISM54=y
 
 # Driver interface for drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl, probably not
-# shipped with your distribution yet
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for drivers using Devicescape IEEE 802.11 stack
-#CONFIG_DRIVER_DEVICESCAPE=y
-# Currently, driver_devicescape.c build requires some additional parameters
-# to be able to include some of the kernel header files. Following lines can
-# be used to set these (WIRELESS_DEV must point to the root directory of the
-# wireless-dev.git tree).
-#WIRELESS_DEV=/usr/src/wireless-dev
-#CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
-# driver_devicescape.c requires a rather new libnl, probably not
-# shipped with your distribution yet
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
 #LIBNL=/usr/src/libnl
 #CFLAGS += -I$(LIBNL)/include
 #LIBS += -L$(LIBNL)/lib
@@ -49,8 +36,11 @@ CONFIG_DRIVER_NL80211=y
 #CFLAGS += -I/usr/local/include
 #LIBS += -L/usr/local/lib
 
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
 # IEEE 802.11F/IAPP
-CONFIG_IAPP=y
+# CONFIG_IAPP=y
 
 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y
@@ -91,6 +81,10 @@ CONFIG_PEERKEY=y
 # EAP-AKA for the integrated EAP server
 #CONFIG_EAP_AKA=y
 
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
 # EAP-PAX for the integrated EAP server
 #CONFIG_EAP_PAX=y
 
@@ -112,6 +106,17 @@ CONFIG_PEERKEY=y
 # to add the needed functions.
 #CONFIG_EAP_FAST=y
 
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 #CONFIG_PKCS12=y
@@ -123,11 +128,28 @@ CONFIG_PEERKEY=y
 # Build IPv6 support for RADIUS operations
 #CONFIG_IPV6=y
 
-# IEEE 802.11r/D4.1 (Fast BSS Transition)
-# This enables an experimental implementation of a draft version of
-# IEEE 802.11r. This draft is still subject to change, so it should be noted
-# that this version may not comply with the final standard.
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y
 
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
 # IEEE 802.11n (High Throughput) support
 CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+CONFIG_TLS=internal