-+#ifndef _MIPS_AVALANCHE_H
-+#define _MIPS_AVALANCHE_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * AVALANCHE board SDRAM base address. This is used to setup the
-+ * bootmem tables
-+ */
-+
-+#define AVALANCHE_SDRAM_BASE 0x14000000UL
-+
-+/*
-+ * AVALANCHE board vectors
-+ */
-+
-+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
-+/*
-+ * Avalanche RTC-device indirect register access.
-+ */
-+
-+#define EVM3_RTC_ADR_REG (KSEG1ADDR(0x1f000800))
-+#define EVM3_RTC_DAT_REG (KSEG1ADDR(0x1f000808))
-+
-+/*
-+ * Evm3 interrupt controller register base (primary)
-+ */
-+
-+#define AVALANCHE_ICTRL_REGS_BASE (KSEG1ADDR(0x08612400))
-+
-+/*
-+ * Avalanche exception controller register base (secondary)
-+ */
-+#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE+0x80)
-+
-+
-+/*
-+ * Avalanche Interrupt Channel Control register base
-+ */
-+#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
-+
-+
-+/*
-+ * Avalanche UART register base.
-+ */
-+
-+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */
-+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
-+/*
-+ * AVALANCHE DMA controller base
-+ */
-+
-+#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */
-+
-+
-+/*
-+ * AVALANCHE display register base.
-+ */
-+
-+#define EVM3_ASCII_DISPLAY_POS_BASE (KSEG1ADDR(0x1D000038))
-+#define EVM3_ASCII_DISPLAY_WORD_BASE (KSEG1ADDR(0x1D00003F)) /* How is this used??? JAH */
-+
-+
-+#define EVM3_ASCIIPOS0 0x1D000038
-+#define EVM3_ASCIIPOS1 0x1D000039
-+#define EVM3_ASCIIPOS2 0x1D00003A
-+#define EVM3_ASCIIPOS3 0x1D00003B
-+#define EVM3_ASCIIPOS4 0x1D00003C
-+#define EVM3_ASCIIPOS5 0x1D00003D
-+#define EVM3_ASCIIPOS6 0x1D00003E
-+#define EVM3_ASCIIPOS7 0x1D00003F
-+
-+/*
-+ * Yamon Prom print address.
-+ */
-+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
-+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
-+
-+/*
-+ * Evm3 Reset and PSU standby register.
-+ */
-+#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */
-+#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */
-+#define AVALANCHE_GORESET 0x1
-+#define AVALANCHE_GOSTBY 0x1
-+
-+/************************************************************************
-+ * PERIPHERAL BUS LEDs (P-LED):
-+*************************************************************************/
-+
-+/************************************************************************
-+ * P-LED Register Addresses
-+*************************************************************************/
-+
-+#define EVM3_PLED (KSEG1ADDR(0x01C500000)) /* 0x1D200000 P-LED */
-+
-+
-+/************************************************************************
-+ * Register field encodings
-+*************************************************************************/
-+
-+/******** reg: PLED ********/
-+/* bits 7:0: VAL */
-+#define EVM3_PLED_VAL_MSK 0xff
-+
-+/* bit 0: */
-+#define EVM3_PLED_BIT0_SHF 0
-+#define EVM3_PLED_BIT0_MSK (1 << EVM3_PLED_BIT0_SHF)
-+#define EVM3_PLED_BIT0_ON EVM3_PLED_BIT0_MSK
-+
-+/* bit 1: */
-+#define EVM3_PLED_BIT1_SHF 1
-+#define EVM3_PLED_BIT1_MSK (1 << EVM3_PLED_BIT1_SHF)
-+#define EVM3_PLED_BIT1_ON EVM3_PLED_BIT1_MSK
-+
-+/* bit 2: */
-+#define EVM3_PLED_BIT2_SHF 2
-+#define EVM3_PLED_BIT2_MSK (1 << EVM3_PLED_BIT2_SHF)
-+#define EVM3_PLED_BIT2_ON EVM3_PLED_BIT2_MSK
-+
-+/* bit 3: */
-+#define EVM3_PLED_BIT3_SHF 3
-+#define EVM3_PLED_BIT3_MSK (1 << EVM3_PLED_BIT3_SHF)
-+#define EVM3_PLED_BIT3_ON EVM3_PLED_BIT3_MSK
-+
-+/* bit 4: */
-+#define EVM3_PLED_BIT4_SHF 4
-+#define EVM3_PLED_BIT4_MSK (1 << EVM3_PLED_BIT4_SHF)
-+#define EVM3_PLED_BIT4_ON EVM3_PLED_BIT4_MSK
-+
-+/* bit 5: */
-+#define EVM3_PLED_BIT5_SHF 5
-+#define EVM3_PLED_BIT5_MSK (1 << EVM3_PLED_BIT5_SHF)
-+#define EVM3_PLED_BIT5_ON EVM3_PLED_BIT5_MSK
-+
-+/* bit 6: */
-+#define EVM3_PLED_BIT6_SHF 6
-+#define EVM3_PLED_BIT6_MSK (1 << EVM3_PLED_BIT6_SHF)
-+#define EVM3_PLED_BIT6_ON EVM3_PLED_BIT6_MSK
-+
-+/* bit 7: */
-+#define EVM3_PLED_BIT7_SHF 7
-+#define EVM3_PLED_BIT7_MSK (1 << EVM3_PLED_BIT7_SHF)
-+#define EVM3_PLED_BIT7_ON EVM3_PLED_BIT7_MSK
-+
-+#endif /* !(_MIPS_AVALANCHE_H) */
-+