[brcm63xx] more fixes for bcm6338, no need not to prevent reads from MPI registers...

[openwrt.git] / target / linux / brcm63xx / files / include / asm-mips / mach-bcm63xx / bcm63xx_regs.h

diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
index f3a5d0a..7e215a5 100644 (file)
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
+++ b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
@@ -15,15 +15,25 @@
 /* Clock Control register */
 #define PERF_CKCTL_REG                 0x4
 
+#define CKCTL_6338_ADSLPHY_EN          (1 << 0)
+#define CKCTL_6338_MPI_EN              (1 << 1)
+#define CKCTL_6338_DRAM_EN             (1 << 2)
 #define CKCTL_6338_ENET_EN             (1 << 4)
 #define CKCTL_6338_USBS_EN             (1 << 4)
 #define CKCTL_6338_SAR_EN              (1 << 5)
 #define CKCTL_6338_SPI_EN              (1 << 9)
 
-#define CKCTL_6338_ALL_SAFE_EN         (CKCTL_6338_ENET_EN |           \
+#define CKCTL_6338_ALL_SAFE_EN         (CKCTL_6338_ADSLPHY_EN |        \
+                                       CKCTL_6338_MPI_EN |             \
+                                       CKCTL_6338_ENET_EN |            \
                                        CKCTL_6338_SAR_EN |             \
                                        CKCTL_6338_SPI_EN)
 
+#define CKCTL_6345_CPU_EN              (1 << 0)
+#define CKCTL_6345_UART_EN             (1 << 3)
+#define CKCTL_6345_ENET_EN             (1 << 7)
+#define CKCTL_6345_USBH_EN             (1 << 8)
+
 #define CKCTL_6348_ADSLPHY_EN          (1 << 0)
 #define CKCTL_6348_MPI_EN              (1 << 1)
 #define CKCTL_6348_SDRAM_EN            (1 << 2)
@@ -794,8 +804,8 @@
 #define SPI_BCM_6358_SPI_MSG_DATA      0x02
 #define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e
 
-#define SPI_BCM_6358_SPI_RX_FIFO       0x400
-#define SPI_BCM_6358_SPI_RX_FIFO_SIZE  0x220
+#define SPI_BCM_6358_SPI_RX_DATA       0x400
+#define SPI_BCM_6358_SPI_RX_DATA_SIZE  0x220
 
 #define SPI_BCM_6358_SPI_CMD           0x700   /* 16-bits register */
 
@@ -815,17 +825,17 @@
 /* Shared SPI definitions */
 
 /* Message configuration */
-#define SPI_FD_RW                      0
-#define SPI_HD_W                       1
-#define SPI_HD_R                       2
+#define SPI_FD_RW                      0x00
+#define SPI_HD_W                       0x01
+#define SPI_HD_R                       0x02
 #define SPI_BYTE_CNT_SHIFT             0
 #define SPI_MSG_TYPE_SHIFT             14
 
 /* Command */
-#define SPI_CMD_NOOP                   0
-#define SPI_CMD_SOFT_RESET             1
-#define SPI_CMD_HARD_RESET             2
-#define SPI_CMD_START_IMMEDIATE                3
+#define SPI_CMD_NOOP                   0x01
+#define SPI_CMD_SOFT_RESET             0x02
+#define SPI_CMD_HARD_RESET             0x04
+#define SPI_CMD_START_IMMEDIATE                0x08
 #define SPI_CMD_COMMAND_SHIFT          0
 #define SPI_CMD_COMMAND_MASK           0x000f
 #define SPI_CMD_DEVICE_ID_SHIFT                4
@@ -851,12 +861,14 @@
 #define SPI_SERIAL_BUSY                        0x08
 
 /* Clock configuration */
-#define SPI_CLK_0_391MHZ               1
-#define SPI_CLK_0_781MHZ               2 /* default */
-#define SPI_CLK_1_563MHZ               3
-#define SPI_CLK_3_125MHZ               4
-#define SPI_CLK_6_250MHZ               5
-#define SPI_CLK_12_50MHZ               6
+#define SPI_CLK_20MHZ                  0x00
+#define SPI_CLK_0_391MHZ               0x01
+#define SPI_CLK_0_781MHZ               0x02 /* default */
+#define SPI_CLK_1_563MHZ               0x03
+#define SPI_CLK_3_125MHZ               0x04
+#define SPI_CLK_6_250MHZ               0x05
+#define SPI_CLK_12_50MHZ               0x06
+#define SPI_CLK_25MHZ                  0x07
 #define SPI_CLK_MASK                   0x07
 #define SPI_SSOFFTIME_MASK             0x38
 #define SPI_SSOFFTIME_SHIFT            3