move firstboot to preinit for now (until a better solution is implemented), required...

[openwrt.git] / openwrt / package / base-files / default / etc / init.d / S10boot

diff --git a/openwrt/package/base-files/default/etc/init.d/S10boot b/openwrt/package/base-files/default/etc/init.d/S10boot
index b0dc04e..02fddee 100755 (executable)
--- a/openwrt/package/base-files/default/etc/init.d/S10boot
+++ b/openwrt/package/base-files/default/etc/init.d/S10boot
@@ -5,28 +5,24 @@
         echo "S" > /proc/jffs2_bbc
 }
 
         echo "S" > /proc/jffs2_bbc
 }
 

+vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+
+HOSTNAME=$(nvram get wan_hostname)
+HOSTNAME=${HOSTNAME%%.*}
+echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
+

 mkdir -p /var/run
 mkdir -p /var/log
 touch /var/log/wtmp
 touch /var/log/lastlog
 mkdir -p /var/run
 mkdir -p /var/log
 touch /var/log/wtmp
 touch /var/log/lastlog

+[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
+
+for iface in $(/sbin/ifconfig -a | awk '{print $1}' | grep eth); do
+       /usr/bin/env -i ACTION=add INTERFACE="$iface" /sbin/hotplug net
+done

 
 sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
 
 ifconfig lo 127.0.0.1 up
 ifconfig eth0 promisc
 
 
 sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
 
 ifconfig lo 127.0.0.1 up
 ifconfig eth0 promisc
 

-[ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && { # FIXME: replace when the new switch driver is integrated...
-  robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
-  robocfg show
-}
-
-HOSTNAME=$(nvram get wan_hostname)
-HOSTNAME=${HOSTNAME%%.*}
-echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
-
-vconfig set_name_type VLAN_PLUS_VID_NO_PAD
-
-# automagically run firstboot
-[ -z "$FAILSAFE" -a -z "$(nvram get no_root_swap)" ] && {
-       { mount|grep "on / type jffs2" 1>&-; } || firstboot
-}