broadcom-diag: add support for some new devices

[openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt288x / devices.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c
index 3b575f6..e9e98d7 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c
@@ -1,7 +1,7 @@
 /*
  *  Ralink RT288x SoC platform device registration
  *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -14,6 +14,9 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
 #include <linux/etherdevice.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/rt2x00_platform.h>
 
 #include <asm/addrspace.h>
 
@@ -111,17 +114,19 @@ static struct resource rt288x_wifi_resources[] = {
        },
 };
 
+static struct rt2x00_platform_data rt288x_wifi_data;
 static struct platform_device rt288x_wifi_device = {
        .name                   = "rt2800_wmac",
        .resource               = rt288x_wifi_resources,
        .num_resources  = ARRAY_SIZE(rt288x_wifi_resources),
        .dev = {
-               .platform_data = NULL,
+               .platform_data = &rt288x_wifi_data,
        }
 };
 
 void __init rt288x_register_wifi(void)
 {
+       rt288x_wifi_data.eeprom_file_name = "RT288X.eeprom";
        platform_device_register(&rt288x_wifi_device);
 }
 
@@ -154,7 +159,13 @@ static struct platform_device rt288x_eth_device = {
 
 void __init rt288x_register_ethernet(void)
 {
-       rt288x_eth_data.sys_freq = rt288x_sys_freq;
+       struct clk *clk;
+
+       clk = clk_get(NULL, "sys");
+       if (IS_ERR(clk))
+               panic("unable to get SYS clock, err=%ld", PTR_ERR(clk));
+
+       rt288x_eth_data.sys_freq = clk_get_rate(clk);
        rt288x_eth_data.reset_fe = rt288x_fe_reset;
        rt288x_eth_data.min_pkt_len = 64;
 
@@ -163,3 +174,30 @@ void __init rt288x_register_ethernet(void)
 
        platform_device_register(&rt288x_eth_device);
 }
+
+static struct resource rt288x_wdt_resources[] = {
+       {
+               .start  = RT2880_TIMER_BASE,
+               .end    = RT2880_TIMER_BASE + RT2880_TIMER_SIZE - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device rt288x_wdt_device = {
+       .name           = "ramips-wdt",
+       .id             = -1,
+       .resource       = rt288x_wdt_resources,
+       .num_resources  = ARRAY_SIZE(rt288x_wdt_resources),
+};
+
+void __init rt288x_register_wdt(void)
+{
+       u32 t;
+
+       /* enable WDT reset output on pin SRAM_CS_N */
+       t = rt288x_sysc_rr(SYSC_REG_CLKCFG);
+       t |= CLKCFG_SRAM_CS_N_WDT;
+       rt288x_sysc_wr(t, SYSC_REG_CLKCFG);
+
+       platform_device_register(&rt288x_wdt_device);
+}