refresh patch

[openwrt.git] / package / broadcom-diag / src / diag.c

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 89af0f7..fefd036 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -61,6 +61,7 @@ enum {
        WRTSL54GS,
        WRT54G3G,
        WRT160N,
        WRTSL54GS,
        WRT54G3G,
        WRT160N,

+       WRT300NV11,

        WRT350N,
        WRT600N,
        WRT600NV11,
        WRT350N,
        WRT600N,
        WRT600NV11,


@@ -131,6 +132,12 @@ enum {
 
        /* Sitecom */
        WL105B,
 
        /* Sitecom */
        WL105B,

+
+       /* Western Digital */
+       WDNetCenter,
+
+       /* Askey */
+       RT210W,

 };
 
 static void __init bcm4780_init(void) {
 };
 
 static void __init bcm4780_init(void) {


@@ -147,6 +154,21 @@ static void __init bcm4780_init(void) {
                schedule_timeout(HZ * 5);
 }
 
                schedule_timeout(HZ * 5);
 }
 

+static void __init NetCenter_init(void) {
+               /* unset pin 6 (+12V) */
+               int pin = 1 << 6;
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);
+               /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
+               pin = 1 << 1;
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);
+               /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
+               bcm4780_init();
+}
+

 static void __init bcm57xx_init(void) {
        int pin = 1 << 2;
 
 static void __init bcm57xx_init(void) {
        int pin = 1 << 2;
 


@@ -255,6 +277,19 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
                        { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
                },
        },

+       [WRT300NV11] = {
+               .name           = "Linksys WRT300N V1.1",
+               .buttons        = {
+                       { .name = "reset",     .gpio = 1 << 6 }, // "Reset" on back panel
+                       { .name = "ses",       .gpio = 1 << 4 }, // "Reserved" on top panel
+               },
+               .leds           = {
+                       { .name = "power",     .gpio = 1 << 1, .polarity = NORMAL  }, // "Power"
+                       { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
+                       { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
+               },
+               .platform_init = bcm57xx_init,
+       },

        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {


@@ -793,6 +828,30 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 3},
                },
        },
                        { .name = "power",      .gpio = 1 << 3},
                },
        },

+       /* Western Digital Net Center */
+       [WDNetCenter] = {
+               .name   = "Western Digital NetCenter",
+               .buttons        = {
+                       { .name = "power",      .gpio = 1 << 0},
+                       { .name = "reset",      .gpio = 1 << 7},
+               },
+               .platform_init = NetCenter_init,
+       },
+       /* Askey (and clones) */
+       [RT210W] = {
+               .name           = "Askey RT210W",
+               .buttons        = {
+                       /* Power button is hard-wired to hardware reset */
+                       /* but is also connected to GPIO 7 (probably for bootloader recovery)  */
+                       { .name = "power",      .gpio = 1 << 7},
+               },
+               .leds           = {
+                       /* These were verified and named based on Belkin F5D4230-4 v1112 */
+                       { .name = "connected",  .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
+               },
+       },

 };
 
 static struct platform_t __init *platform_detect(void)
 };
 
 static struct platform_t __init *platform_detect(void)


@@ -886,6 +945,9 @@ static struct platform_t __init *platform_detect(void)
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */

+                       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1"))
+                               return &platforms[WRT300NV11];
+

                        if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
                                return &platforms[WRT350N];
 
                        if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
                                return &platforms[WRT350N];
 


@@ -930,6 +992,10 @@ static struct platform_t __init *platform_detect(void)
                                !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
                        return &platforms[DIR320];
 
                                !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
                        return &platforms[DIR320];
 

+               if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) {
+                       return &platforms[WDNetCenter];
+               }
+

        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {


@@ -959,6 +1025,18 @@ static struct platform_t __init *platform_detect(void)
                /* unknown asus stuff, probably bcm4702 */
                if (startswith(boardnum, "asusX"))
                        return &platforms[ASUS_4702];
                /* unknown asus stuff, probably bcm4702 */
                if (startswith(boardnum, "asusX"))
                        return &platforms[ASUS_4702];

+
+               /* bcm4702 based Askey RT210W clones, Including:
+                * Askey RT210W (duh?)
+                * Siemens SE505v1
+                * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated)
+                */
+               if (!strcmp(boardtype,"bcm94710r4")
+                && !strcmp(boardnum ,"100")
+                && !strcmp(getvar("pmon_ver"),"v1.03.12.bk")
+                  ){
+                       return &platforms[RT210W];
+               }

        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */