when changing the mac address of a bridge interface, keep member interface addresses...
[openwrt.git] / target / linux / brcm63xx / image / Makefile
index fab73ef..e2d63be 100644 (file)
@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -7,8 +7,8 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-LOADADDR = 0x8108c8f4          # RAM start + 16M 
-KERNEL_ENTRY = 0x80100000      # Default kernel entry in arch/mips/Makefile
+LOADADDR = 0x80010000          # RAM start + 16M 
+KERNEL_ENTRY = $(LOADADDR)     # Newer kernels add a jmp to the kernel_entry at the start of the binary
 RAMSIZE = 0x01000000           # 64MB
 
 LOADER_MAKEOPTS= \
@@ -27,17 +27,75 @@ define trxalign/squashfs
 -a 1024
 endef
 
+define Image/Build/CFE
+       # Generate the tagged image
+       $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+               -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
+               -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+               -r "$(5)" $(6)
+#              -b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
+
+endef
+
+define Image/Build/CFEAGPF
+       # Generate the tagged image
+       $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+               -o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
+               -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+               -v 8 -m IMAGE -k 0x20000 -n $(4)
+endef
+
+define Image/Build/RG100A
+       # Generate the tagged image
+       $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+               -o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
+               -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+               -k 0x20000 -n $(4)
+endef
+
+
+define Image/Build/RedBoot
+       cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
+       gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
+       $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
+       dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
+       dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
+endef
+
+define Image/Build/CFEOLD
+       $(TOPDIR)/scripts/brcmImage.pl -t -p    \
+               -b $(2) -c $(3)                 \
+               -k $(KDIR)/vmlinux.lzma.cfe     \
+               -r $(KDIR)/root.$(1)            \
+               -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
+endef
+
 define Build/Clean
        $(MAKE) -C lzma-loader clean
 endef
 
 define Image/Prepare
+       # Standard LZMA kernel
        cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+
+       # CFE is a LZMA nazi! It took me hours to find out the parameters!
+       # Also I think lzma has a bug cause it generates different output depending on
+       # if you use stdin / stdout or not. Use files instead of stdio here, cause
+       # otherwise CFE will complain and not boot the image.
+       $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+
+       # Strip out the length, CFE doesn't like this
+       dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
+       dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+       rm -f $(KDIR)/vmlinux.lzma.tmp
+
+       # Build the LZMA loader
        rm -f $(KDIR)/loader.gz
        $(MAKE) -C lzma-loader \
                BUILD_DIR="$(KDIR)" \
                TARGET="$(KDIR)" \
                clean install
+
        echo -ne "\\x00" >> $(KDIR)/loader.gz
        rm -f $(KDIR)/fs_mark
        touch $(KDIR)/fs_mark
@@ -45,9 +103,73 @@ define Image/Prepare
 endef
 
 define Image/Build
-ifneq($(1),ext2)
-       $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
-endif
+       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+       # Various routers
+       $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
+       $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,-y 5)
+       $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-revision,OpenWRT-$(REVISION))
+       $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
+       $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,-y 5)
+       $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
+       $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
+
+       # BT Voyager V210_BTR
+       $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,-y 5)
+       # BT Voyager V210_ROI, V210_WB
+       $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,-y 5)
+       # BT Voyager V2091_BTR
+       $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,y 5)
+       # BT Voyager V2091_ROI, V2091_WB
+       $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,-y 5)
+       # BT Voyager V220V, V220V_MGCP_BTR
+       $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,-y 5)
+       # BT Voyager V2110, V2110_AA, V2110_ROI
+       $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,-y 5)
+       # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
+       $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,-y 5)
+       # RTA1025W_16 (numerous routers)
+       $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,-y 5)
+       # Tecom GW6000
+       $(call Image/Build/CFE,$(1),96348GW,6348,GW6000)
+       # Tecom GW6200
+       $(call Image/Build/CFE,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
+       # Neufbox4
+       $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
+       # Comtrend 536, 5621
+       $(call Image/Build/CFE,$(1),96348GW-11,6348,CT536_CT5621)
+       # Davolink DV201AMR
+       $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
+       # USR 9108
+       $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
+       # NetGear DG834GT, DG834PN
+       $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
+       # Belkin f5d7633
+       $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
+       # D-Link DSL-2640B
+       $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
+       # D-Link DSL-2740B
+       $(call Image/Build/CFE,$(1),96358GW,6358,DSL2740B)
+
+       # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
+       $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
+       # TP-Link 8900GB
+       $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
+
+       # Sagem F@ST2404
+       $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
+       $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
+       # Inventel Livebox
+       $(call Image/Build/RedBoot,livebox)
+       # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
+       $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
+       $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
+       # Pirelli A226G
+       $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
+       $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
+       
+       # RG100A,DB120 etc.
+       $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
+
 endef
 
 $(eval $(call BuildImage))
This page took 0.032797 seconds and 4 git commands to generate.