ramips: rt305x: add support for the ALFA Networks W502U (R36) board

[openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 8d4c6d5..f98162c 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -1,13 +1,116 @@
 #!/bin/sh
-RT305X=`cat /proc/cpuinfo | grep RT305`
-[ -z "${RT305X}" ] || {
-       uci batch <<EOF
-set network.lan.ifname=eth0.1
-set network.wan=interface
-set network.wan.ifname=eth0.2
-set network.wan.proto=dhcp
-commit network
-EOF
+
+. /etc/functions.sh
+. /lib/ramips.sh
+. /lib/functions/uci-defaults.sh
+
+if [ ! -x /usr/sbin/maccalc ]; then
+       echo "$0: maccalc not found!"
+       return
+fi
+
+ramips_setup_interfaces()
+{
+       local board="$1"
+
+       ucidef_set_interface_loopback
+
+       case $board in
+       argus-atp52b | \
+       b2c | \
+       f5d8235-v2 | \
+       nw718 | \
+       w502u)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;
+
+       wl-351)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "rtl8366rb" "1" "1"
+               ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
+               ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+               ;;
+
+       wli-tx4-ag300n)
+               ucidef_set_interface_lan "eth0"
+               ;;
+
+       rt-n15)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "rtl8366s" "1" "1"
+               ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+               ;;
+
+       *)
+               RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
+               if [ -n "${RT3X5X}" ]; then
+                       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               else
+                       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               fi
+               ;;
+       esac
+}
+
+ramips_setup_macs()
+{
+       local board="$1"
+       local lan_mac=""
+       local wan_mac=""
+
+       case $board in
+       f5d8235-v2)
+               lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
+       argus-atp52b | \
+       b2c | \
+       nw718 | \
+       rt-n15 | \
+       wl-351)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
+       dir-300-b1 |\
+       dir-300-b2 |\
+       dir-600-b1)
+               lan_mac=$(ramips_get_mac_binary devdata 16388)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
+       esr-9753 | \
+       nbg-419n)
+                lan_mac=$(ramips_get_mac_binary factory 4)
+                wan_mac=$(ramips_get_mac_binary factory 40)
+               ;;
+
+       w502u)
+                lan_mac=$(ramips_get_mac_binary factory 40)
+                wan_mac=$(ramips_get_mac_binary factory 46)
+               ;;
+
+       wli-tx4-ag300n)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               ;;
+
+       esac
+
+       [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
+       [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
 }
 
+[ -e /etc/config/network ] && exit 0
+
+touch /etc/config/network
+
+board=$(ramips_board_name)
+
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+
 uci commit network
+
+exit 0