ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-aw-nr580.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
index d8bed69..a6c317e 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-aw-nr580.c
@@ -9,17 +9,18 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
 
+#include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
 
 #define AW_NR580_GPIO_LED_READY_RED    0
 #define AW_NR580_GPIO_LED_WLAN         1
@@ -60,40 +61,31 @@ static struct gpio_button aw_nr580_gpio_buttons[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_0,
-               .threshold      = 5,
+               .code           = KEY_RESTART,
+               .threshold      = 3,
                .gpio           = AW_NR580_GPIO_BTN_RESET,
                .active_low     = 1,
        }, {
                .desc           = "wps",
                .type           = EV_KEY,
-               .code           = BTN_1,
-               .threshold      = 5,
+               .code           = KEY_WPS_BUTTON,
+               .threshold      = 3,
                .gpio           = AW_NR580_GPIO_BTN_WPS,
                .active_low     = 1,
        }
 };
 
-static struct ar71xx_pci_irq aw_nr580_pci_irqs[] __initdata = {
-       {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
-       }
-};
-
 static void __init aw_nr580_setup(void)
 {
        ar71xx_add_device_mdio(0x0);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-       ar71xx_eth0_data.phy_mask = 0xf;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
        ar71xx_add_device_eth(0);
 
-       ar71xx_pci_init(ARRAY_SIZE(aw_nr580_pci_irqs), aw_nr580_pci_irqs);
+       pb42_pci_init();
 
        ar71xx_add_device_m25p80(NULL);
 
@@ -105,4 +97,5 @@ static void __init aw_nr580_setup(void)
                                        aw_nr580_gpio_buttons);
 }
 
-MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AzureWave AW-NR580", aw_nr580_setup);
+MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
+            aw_nr580_setup);