ramips: check the size of the uImage in image generation
[openwrt.git] / target / linux / ramips / image / Makefile
index 4cca2fc..446bf7b 100644 (file)
@@ -7,26 +7,24 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-IMGNAME:=$(BIN_DIR)/openwrt-$(BOARD)
-
 define imgname
-$(IMGNAME)-$(2)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
+$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
 endef
 
-VMLINUX:=$(IMGNAME)-vmlinux
-UIMAGE:=$(IMGNAME)-uImage
+VMLINUX:=$(IMG_PREFIX)-vmlinux
+UIMAGE:=$(IMG_PREFIX)-uImage
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-       VMLINUX:=$(IMGNAME)-vmlinux-initramfs
-       UIMAGE:=$(IMGNAME)-uImage-initramfs
+       VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
+       UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
 endif
 
-ifeq ($(CONFIG_RALINK_RT305X),y)
+ifeq ($(CONFIG_RALINK_RT288X),y)
 define kernel_entry
--a 0x80000000 -e 0x80000000
+-a 0x88000000 -e 0x88000000
 endef
 else
 define kernel_entry
--a 0x88000000 -e 0x88000000
+-a 0x80000000 -e 0x80000000
 endef
 endif
 
@@ -47,24 +45,21 @@ define MkImage
 endef
 
 define Image/BuildKernel
-       cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
-       cp $(KDIR)/vmlinux $(VMLINUX).bin
+       cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
+       cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
        $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
        $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
-       cp $(KDIR)/uImage.lzma $(UIMAGE).bin
+       cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
 endef
 
 define BuildFirmware/Generic
        $(call PatchKernelLzma,$(2),$(3) $($(4)))
-       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt $(5) ]; then \
-               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
+       if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
                echo "Warning: $(KDIR)/root.$(1) is too big"; \
        else \
-               mkimage -A mips -O linux -T kernel -C lzma \
-                       $(call kernel_entry) \
-                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-                       -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage; \
                ( \
                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
                        dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
@@ -82,14 +77,25 @@ define Image/Build/Template/GENERIC_8M
        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960)
 endef
 
+mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtd_dir300b1_kernel_part_size=851968
+mtd_dir300b1_rootfs_part_size=3014656
+define Image/Build/Template/DIR300B1
+       $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
+endef
+
 define Image/Build/Profile/DIR300B1
-       $(call Image/Build/Template/GENERIC_4M,$(1),dir-300-b1,DIR-300-revB)
+       $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-revB)
 endef
 
 define Image/Build/Profile/FONERA20N
        $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
 endef
 
+define Image/Build/Template/PWH2004
+       $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
+endef
+
 define Image/Build/Profile/V22RW2X2
        $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
 endef
@@ -98,12 +104,49 @@ define Image/Build/Profile/WHRG300N
        $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
 endef
 
+define Image/Build/Profile/HW5503G
+       $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
+endef
+
+define Image/Build/Profile/MOFI35003GN
+       $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
+endef
+
+mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
+mtd_wcr150gn_kernel_part_size=851968
+mtd_wcr150gn_rootfs_part_size=3014656
+define Image/Build/Template/WCR150GN
+       $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size))
+endef
+
+define Image/Build/Profile/WCR150GN
+       $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN)
+endef
+
+
+mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
+mtd_f5d8235_kernel_part_size=1572864
+mtd_f5d8235_rootfs_part_size=6356992
+define Image/Build/Template/F5D8235V2
+       $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
+define Image/Build/Profile/F5D8235V2
+       $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
+endef
+
+
 ifeq ($(CONFIG_RALINK_RT305X),y)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/DIR300B1,$(1))
        $(call Image/Build/Profile/FONERA20N,$(1))
        $(call Image/Build/Profile/V22RW2X2,$(1))
+       $(call Image/Build/Profile/PWH2004,$(1))
        $(call Image/Build/Profile/WHRG300N,$(1))
+       $(call Image/Build/Profile/WCR150GN,$(1))
+       $(call Image/Build/Profile/F5D8235V2,$(1))
+       $(call Image/Build/Profile/HW5503G,$(1))
+       $(call Image/Build/Profile/MOFI35003GN,$(1))
 endef
 endif
 
@@ -113,7 +156,7 @@ endef
 
 define Image/Build
        $(call Image/Build/$(1))
-       dd if=$(KDIR)/root.$(1) of=$(IMGNAME)-root.$(1) bs=128k conv=sync
+       dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
        $(call Image/Build/Profile/$(PROFILE),$(1))
 endef
 
This page took 0.030465 seconds and 4 git commands to generate.