[brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds...

[openwrt.git] / README

diff --git a/README b/README
index a92bc76..2975e5c 100644 (file)
--- a/README
+++ b/README
@@ -3,18 +3,18 @@ This is the buildsystem for the OpenWrt Linux distribution
 Please use "make menuconfig" to configure your appreciated
 configuration for the toolchain and firmware.
 
 Please use "make menuconfig" to configure your appreciated
 configuration for the toolchain and firmware.
 

-You need to have installed gcc, binutils, patch, bzip2, flex, bison,
+You need to have installed gcc, binutils, patch, bzip2, flex,

 make, gettext, pkg-config, unzip, libz-dev and libc headers.
 
 Simply running 'make' will build your firmware.
 It will download all sources, build the cross-compile toolchain, 
 the kernel and all choosen applications.
 
 make, gettext, pkg-config, unzip, libz-dev and libc headers.
 
 Simply running 'make' will build your firmware.
 It will download all sources, build the cross-compile toolchain, 
 the kernel and all choosen applications.
 

-You can use scripts/flash.sh for remotely updating your embedded system
-via tftp.
+You can use scripts/flashing/flash.sh for remotely updating your embedded
+system via tftp.

 
 The OpenWrt system is documented in docs/. You will need a LaTeX distribution
 
 The OpenWrt system is documented in docs/. You will need a LaTeX distribution

-to build the documentation. Type make -C docs/ to build the documentation.
+and the tex4ht package to build the documentation. Type make -C docs/ to build it.

 
 Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
 Cygwin will not be supported because of the lack of case sensitiveness.
 
 Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
 Cygwin will not be supported because of the lack of case sensitiveness.