strip the kernel version suffix from target directories, except for brcm-2.4 (the...

[openwrt.git] / target / linux / adm5120-2.6 / files / drivers / mtd / nand / rbmipsnand.c

diff --git a/target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c
deleted file mode 100644 (file)
index f086552..0000000
--- a/target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*==============================================================================*/
-/* rbmipsnand.c                                                                 */
-/* This module is derived from the 2.4 driver shipped by Microtik for their     */
-/* Routerboard 1xx and 5xx series boards.  It provides support for the built in */
-/* NAND flash on the Routerboard 1xx series boards for Linux 2.6.19+.           */
-/* Licence: Original Microtik code seems not to have a licence.                 */
-/*          Rewritten code all GPL V2.                                          */
-/* Copyright(C) 2007 david.goodenough@linkchoose.co.uk (for rewriten code)      */
-/*==============================================================================*/
-
-#include <linux/init.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/bootinfo.h>
-
-#define SMEM1_BASE 0x10000000   // from ADM5120 documentation
-#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(SMEM1_BASE) + x)))
-
-#define NAND_RW_REG    0x0     //data register
-#define NAND_SET_CEn   0x1     //CE# low
-#define NAND_CLR_CEn   0x2     //CE# high
-#define NAND_CLR_CLE   0x3     //CLE low
-#define NAND_SET_CLE   0x4     //CLE high
-#define NAND_CLR_ALE   0x5     //ALE low
-#define NAND_SET_ALE   0x6     //ALE high
-#define NAND_SET_SPn   0x7     //SP# low (use spare area)
-#define NAND_CLR_SPn   0x8     //SP# high (do not use spare area)
-#define NAND_SET_WPn   0x9     //WP# low
-#define NAND_CLR_WPn   0xA     //WP# high
-#define NAND_STS_REG   0xB     //Status register
-
-#define MEM32(x) *((volatile unsigned *) (x))
-static void __iomem *p_nand;
-
-static int rb100_dev_ready(struct mtd_info *mtd) {
-    return SMEM1(NAND_STS_REG) & 0x80;
-}
-
-static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-    struct nand_chip *chip = mtd->priv;
-    if (ctrl & NAND_CTRL_CHANGE) {
-        SMEM1((( ctrl & NAND_CLE) ? NAND_SET_CLE : NAND_CLR_CLE)) = 0x01;
-        SMEM1((( ctrl & NAND_ALE) ? NAND_SET_ALE : NAND_CLR_ALE)) = 0x01;
-        SMEM1((( ctrl & NAND_NCE) ? NAND_SET_CEn : NAND_CLR_CEn)) = 0x01;
-        }
-    if( cmd != NAND_CMD_NONE)
-        writeb( cmd, chip->IO_ADDR_W);
-}
-
-static struct mtd_partition partition_info[] = {
-    {
-        name: "RouterBoard NAND Boot",
-        offset: 0,
-       size: 4 * 1024 * 1024
-    },
-    {
-        name: "RouterBoard NAND Main",
-       offset: MTDPART_OFS_NXTBLK,
-       size: MTDPART_SIZ_FULL
-    }
-};
-
-static struct mtd_info rmtd;
-static struct nand_chip rnand;
-
-static unsigned init_ok = 0;
-
-unsigned get_rbnand_block_size(void) {
-       return init_ok ? rmtd.writesize : 0;
-}
-
-EXPORT_SYMBOL(get_rbnand_block_size);
-
-int __init rbmips_init(void) {
-       memset(&rmtd, 0, sizeof(rmtd));
-       memset(&rnand, 0, sizeof(rnand));
-       printk("RB1xx nand\n");
-       MEM32(0xB2000064) = 0x100;
-       MEM32(0xB2000008) = 0x1;
-       SMEM1(NAND_SET_SPn) = 0x01;
-       SMEM1(NAND_CLR_WPn) = 0x01;
-       rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(SMEM1_BASE);
-       rnand.IO_ADDR_W = rnand.IO_ADDR_R;
-       rnand.cmd_ctrl = rbmips_hwcontrol100;
-       rnand.dev_ready = rb100_dev_ready;
-       p_nand = (void __iomem *)ioremap(( unsigned long)SMEM1_BASE, 0x1000);
-       if (!p_nand) {
-               printk("RB1xx nand Unable ioremap buffer");
-               return -ENXIO;
-       }
-       rnand.ecc.mode = NAND_ECC_SOFT;
-       rnand.chip_delay = 25;
-       rnand.options |= NAND_NO_AUTOINCR;
-       rmtd.priv = &rnand;
-       if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
-           && nand_scan(&rmtd, 1)  && nand_scan(&rmtd, 1)) {
-               printk("RB1xxx nand device not found");
-               iounmap ((void *)p_nand);
-               return -ENXIO;
-       }
-       add_mtd_partitions(&rmtd, partition_info, 2);
-       init_ok = 1;
-       return 0;
-}
-
-module_init(rbmips_init);
-