+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
# $Id$
include $(TOPDIR)/rules.mk
-include $(TOPDIR)/package/kernel.mk
+include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=hostap-driver
PKG_VERSION:=0.4.9
PKG_RELEASE:=1
-PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_CAT:=zcat
+PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
+PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
+include $(INCLUDE_DIR)/package.mk
+ifeq ($(DUMP),)
+ -include $(LINUX_DIR)/.config
+endif
+
+define KernelPackage/hostap/Default/2.4
+ VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+endef
+define KernelPackage/hostap/Default/2.6
+ VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
+endef
+define KernelPackage/hostap/Default
+ SUBMENU:=Wireless Drivers
+ DESCRIPTION:=\
+ Host AP is a driver for 802.11b wireless cards based on Intersil \\\
+ Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
+ card to act as an IEEE 802.11 access point.
+ URL:=http://hostap.epitest.fi/
+ $(call KernelPackage/hostap/Default/$(KERNEL))
+endef
-include $(TOPDIR)/package/rules.mk
-define Package/kmod-hostap
- SECTION:=drivers
- CATEGORY:=Drivers
- DEPENDS:=@LINUX_2_4_BRCM||LINUX_2_4_X86
- TITLE:=Host AP support for Prism2/2.5/3 IEEE 802.11b
- DESCRIPTION:=Host AP support for Prism2/2.5/3 IEEE 802.11b \\\
-A driver for 802.11b wireless cards based on Intersil Prism2/2.5/3 \\\
-chipset. This driver supports so called Host AP mode that allows the card \\\
-to act as an IEEE 802.11 access point. \\\
-\\\
-This option includes the base Host AP driver code that is shared by \\\
-different hardware models. You will also need to enable support for \\\
-PLX/PCI/CS version of the driver to actually use the driver. \\\
- URL:=http://hostap.epitest.fi/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+define KernelPackage/hostap
+ $(call KernelPackage/hostap/Default)
+ DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-ieee80211 +kmod-crypto
+ TITLE:=Host AP support for Prism2/2.5/3
+ DESCRIPTION+=\\\
+ \\\
+ This package contains the base Host AP driver code that is shared by \\\
+ different hardware models. You will also need to enable support for \\\
+ PLX/PCI/CS version of the driver to actually use the driver.
+endef
+define KernelPackage/hostap/2.4
+ DEPENDS:=+kmod-crypto
+ FILES:= \
+ $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp)
endef
+define KernelPackage/hostap/2.6
+ KCONFIG:=$(CONFIG_HOSTAP)
+ FILES:= \
+ $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,60,hostap)
+endef
+
-define Package/kmod-hostap-pci
- SECTION:=drivers
- CATEGORY:=Drivers
- DEPENDS:=kmod-hostap
- TITLE:=Host AP driver for Prism2.5 PCI adaptors
- DESCRIPTION:=Host AP driver for Prism2.5 PCI adaptors
- URL:=http://hostap.epitest.fi/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+define KernelPackage/hostap-pci
+ $(call KernelPackage/hostap/Default)
+ DEPENDS:=kmod-hostap
+ TITLE:=Host AP driver for PCI adaptors
+ DESCRIPTION+=\\\
+ \\\
+ This package contains the Host AP driver for Prism2.5 PCI adaptors.
+ AUTOLOAD:=$(call AutoLoad,60,hostap_pci)
endef
+define KernelPackage/hostap-pci/2.4
+ FILES:= \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX)
+endef
+define KernelPackage/hostap-pci/2.6
+ KCONFIG:=$(CONFIG_HOSTAP_PCI)
+ FILES:= \
+ $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX)
+endef
+
-define Package/kmod-hostap-plx
- SECTION:=drivers
- CATEGORY:=Drivers
- DEPENDS:=kmod-hostap
- TITLE:=Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
- DESCRIPTION:=Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
- URL:=http://hostap.epitest.fi/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+define KernelPackage/hostap-plx
+ $(call KernelPackage/hostap/Default)
+ DEPENDS:=kmod-hostap
+ TITLE:=Host AP driver for PLX9052 based PCI adaptors
+ DESCRIPTION+=\\\
+ \\\
+ This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
+ based PCI adaptors.
+ AUTOLOAD:=$(call AutoLoad,60,hostap_plx)
+endef
+define KernelPackage/hostap-plx/2.4
+ FILES:= \
+ $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX)
+endef
+define KernelPackage/hostap-plx/2.6
+ KCONFIG:=$(CONFIG_HOSTAP_PLX)
+ FILES:= \
+ $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX)
endef
-define Build/Compile
+ifeq ($(KERNEL),2.4)
+ define Build/Compile
$(MAKE) -C $(LINUX_DIR)/ \
ARCH="$(LINUX_KARCH)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
modules
-endef
+ endef
+else
+ define Build/Prepare
+ mkdir -p $(PKG_BUILD_DIR)
+ endef
+
+ define Build/Configure
+ endef
+
+ define Build/Compile
+ endef
+endif
-define Package/kmod-hostap/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
-endef
-
-define Package/kmod-hostap-pci/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
-endef
-
-define Package/kmod-hostap-plx/install
- install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
- $(CP) \
- $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
-endef
-$(eval $(call BuildPackage,kmod-hostap))
-$(eval $(call BuildPackage,kmod-hostap-pci))
-$(eval $(call BuildPackage,kmod-hostap-plx))
+$(eval $(call KernelPackage,hostap))
+$(eval $(call KernelPackage,hostap-pci))
+$(eval $(call KernelPackage,hostap-plx))
projects / openwrt.git / blobdiff