[kernel] update 2.6.35.x to 2.6.35.7

[openwrt.git] / target / linux / ixp4xx / patches-2.6.35 / 191-cambria_optional_uart.patch

diff --git a/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch
index 2ebe3e4..ca8b937 100644 (file)
--- a/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch
+++ b/target/linux/ixp4xx/patches-2.6.35/191-cambria_optional_uart.patch
@@ -106,7 +106,7 @@
        unsigned int    type;           /* If UPF_FIXED_TYPE */
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
-@@ -288,6 +288,7 @@ struct uart_port {
+@@ -293,6 +293,7 @@ struct uart_port {
  #define UPIO_TSI              (5)                     /* Tsi108/109 type IO */
  #define UPIO_DWAPB            (6)                     /* DesignWare APB UART */
  #define UPIO_RM9000           (7)                     /* RM9000 type IO */
@@ -114,7 +114,7 @@
  
        unsigned int            read_status_mask;       /* driver specific */
        unsigned int            ignore_status_mask;     /* driver specific */
-@@ -330,6 +331,7 @@ struct uart_port {
+@@ -335,6 +336,7 @@ struct uart_port {
  
        unsigned int            mctrl;                  /* current modem ctrl settings */
        unsigned int            timeout;                /* character-based timeout */
@@ -124,7 +124,7 @@
        unsigned int            custom_divisor;
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -409,6 +409,20 @@ static void mem_serial_out(struct uart_p
+@@ -410,6 +410,20 @@ static void mem_serial_out(struct uart_p
        writeb(value, p->membase + offset);
  }
  
@@ -145,7 +145,7 @@
  static void mem32_serial_out(struct uart_port *p, int offset, int value)
  {
        offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -502,6 +516,11 @@ static void set_io_from_upio(struct uart
+@@ -503,6 +517,11 @@ static void set_io_from_upio(struct uart
                p->serial_out = mem32_serial_out;
                break;
  
@@ -157,7 +157,7 @@
  #ifdef CONFIG_SERIAL_8250_AU1X00
        case UPIO_AU:
                p->serial_in = au_serial_in;
-@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
+@@ -535,6 +554,7 @@ serial_out_sync(struct uart_8250_port *u
        switch (p->iotype) {
        case UPIO_MEM:
        case UPIO_MEM32:
@@ -165,7 +165,7 @@
  #ifdef CONFIG_SERIAL_8250_AU1X00
        case UPIO_AU:
  #endif
-@@ -2450,6 +2470,7 @@ static int serial8250_request_std_resour
+@@ -2460,6 +2480,7 @@ static int serial8250_request_std_resour
        case UPIO_MEM32:
        case UPIO_MEM:
        case UPIO_DWAPB:
@@ -173,7 +173,7 @@
                if (!up->port.mapbase)
                        break;
  
-@@ -2487,6 +2508,7 @@ static void serial8250_release_std_resou
+@@ -2497,6 +2518,7 @@ static void serial8250_release_std_resou
        case UPIO_MEM32:
        case UPIO_MEM:
        case UPIO_DWAPB:
@@ -181,7 +181,7 @@
                if (!up->port.mapbase)
                        break;
  
-@@ -2964,6 +2986,7 @@ static int __devinit serial8250_probe(st
+@@ -2995,6 +3017,7 @@ static int __devinit serial8250_probe(st
                port.serial_in          = p->serial_in;
                port.serial_out         = p->serial_out;
                port.dev                = &dev->dev;
@@ -189,7 +189,7 @@
                port.irqflags           |= irqflag;
                ret = serial8250_register_port(&port);
                if (ret < 0) {
-@@ -3113,6 +3136,7 @@ int serial8250_register_port(struct uart
+@@ -3144,6 +3167,7 @@ int serial8250_register_port(struct uart
                uart->port.iotype       = port->iotype;
                uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
                uart->port.mapbase      = port->mapbase;