[package] uhttpd:

[openwrt.git] / package / kernel / modules / other.mk

diff --git a/package/kernel/modules/other.mk b/package/kernel/modules/other.mk
index f00fb32..a000656 100644 (file)
--- a/package/kernel/modules/other.mk
+++ b/package/kernel/modules/other.mk
@@ -1,230 +1,907 @@
 #
 #

-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2009 OpenWrt.org

 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #

-# $Id$

 
 

-EMENU:=Other modules
+OTHER_MENU:=Other modules

 
 

-define KernelPackage/crypto
-  TITLE:=CryptoAPI modules
-  KCONFIG:= \
-       $(CONFIG_CRYPTO_HMAC) \
-       $(CONFIG_CRYPTO_NULL) \
-       $(CONFIG_CRYPTO_MD4) \
-       $(CONFIG_CRYPTO_MD5) \
-       $(CONFIG_CRYPTO_SHA1) \
-       $(CONFIG_CRYPTO_SHA256) \
-       $(CONFIG_CRYPTO_SHA512) \
-       $(CONFIG_CRYPTO_WP512) \
-       $(CONFIG_CRYPTO_TGR192) \
-       $(CONFIG_CRYPTO_DES) \
-       $(CONFIG_CRYPTO_BLOWFISH) \
-       $(CONFIG_CRYPTO_TWOFISH) \
-       $(CONFIG_CRYPTO_SERPENT) \
-       $(CONFIG_CRYPTO_AES) \
-       $(CONFIG_CRYPTO_CAST5) \
-       $(CONFIG_CRYPTO_CAST6) \
-       $(CONFIG_CRYPTO_TEA) \
-       $(CONFIG_CRYPTO_ARC4) \
-       $(CONFIG_CRYPTO_KHAZAD) \
-       $(CONFIG_CRYPTO_ANUBIS) \
-       $(CONFIG_CRYPTO_DEFLATE) \
-       $(CONFIG_CRYPTO_MICHAEL_MIC) \
-       $(CONFIG_CRYPTO_CRC32C)
-  FILES:=$(MODULES_DIR)/kernel/crypto/*.$(LINUX_KMOD_SUFFIX)
-  SUBMENU:=$(EMENU)
-endef
-$(eval $(call KernelPackage,crypto))
-
-define KernelPackage/ide-core
-  TITLE:=Kernel support for IDE
-  DESCRIPTION:=\
-       Useful for usb mass storage devices (e.g. on WL-HDD)\\\
-       \\\
-       Includes: \\\
-       - ide-core \\\
-       - ide-detect \\\
-       - ide-disk
-  KCONFIG:=$(CONFIG_IDE)
-  FILES:=$(MODULES_DIR)/kernel/drivers/ide/*.$(LINUX_KMOD_SUFFIX)
-  SUBMENU:=$(EMENU)
-  AUTOLOAD:=$(call AutoLoad,20,ide-core) $(call AutoLoad,90,ide-detect ide-disk)
-endef
-$(eval $(call KernelPackage,ide-core))
-
-define KernelPackage/ide-pdc202xx
-  TITLE:=PDC202xx IDE driver
-  SUBMENU:=$(EMENU)
-  KCONFIG:=$(CONFIG_BLK_DEV_PDC202XX_OLD)
-  FILES:=$(MODULES_DIR)/kernel/drivers/ide/pci/pdc202xx_old.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old)
-endef
-$(eval $(call KernelPackage,ide-pdc202xx))
+define KernelPackage/block2mtd
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Block device MTD emulation
+  KCONFIG:=CONFIG_MTD_BLOCK2MTD
+  FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.$(LINUX_KMOD_SUFFIX)
+endef
+$(eval $(call KernelPackage,block2mtd))
+
+define KernelPackage/crc-itu-t
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=CRC ITU-T V.41 support
+  KCONFIG:=CONFIG_CRC_ITU_T
+  FILES:=$(LINUX_DIR)/lib/crc-itu-t.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
+endef

 
 

+define KernelPackage/crc-itu-t/description
+ Kernel module for CRC ITU-T V.41 support
+endef

 
 

-define KernelPackage/lp
-  TITLE:=Parallel port and line printer support
-  KCONFIG:=$(CONFIG_PARPORT)
-  FILES:= \
-       $(MODULES_DIR)/kernel/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
-  SUBMENU:=$(EMENU)
-  AUTOLOAD:=$(call AutoLoad,50, \
-       parport \
-       lp \
-  )
+$(eval $(call KernelPackage,crc-itu-t))
+
+define KernelPackage/crc-ccitt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=CRC-CCITT support
+  KCONFIG:=CONFIG_CRC_CCITT
+  FILES:=$(LINUX_DIR)/lib/crc-ccitt.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+endef
+
+define KernelPackage/crc-ccitt/description
+ Kernel module for CRC-CCITT support

 endef
 endef

-$(eval $(call KernelPackage,lp))

 
 

+$(eval $(call KernelPackage,crc-ccitt))

 
 

-define KernelPackage/soundcore
-  TITLE:=Sound support
-  DESCRIPTION:=Kernel modules for sound support
-  KCONFIG:=$(CONFIG_SOUND)
-  SUBMENU:=$(EMENU)
-  AUTOLOAD:=$(call AutoLoad,30,soundcore)
+
+define KernelPackage/crc7
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=CRC7 support
+  KCONFIG:=CONFIG_CRC7
+  FILES:=$(LINUX_DIR)/lib/crc7.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,crc7)

 endef
 
 endef
 

-define KernelPackage/soundcore/2.4
-  FILES:=$(MODULES_DIR)/kernel/drivers/sound/soundcore.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/crc7/description
+ Kernel module for CRC7 support

 endef
 
 endef
 

-define KernelPackage/soundcore/2.6
-  FILES:=$(MODULES_DIR)/kernel/sound/soundcore.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,crc7))
+
+
+define KernelPackage/crc16
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=CRC16 support
+  KCONFIG:=CONFIG_CRC16
+  FILES:=$(LINUX_DIR)/lib/crc16.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,crc16,1)

 endef
 endef

-$(eval $(call KernelPackage,soundcore))

 
 

+define KernelPackage/crc16/description
+ Kernel module for CRC16 support
+endef
+
+$(eval $(call KernelPackage,crc16))
+
+
+define KernelPackage/eeprom-93cx6
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=EEPROM 93CX6 support
+  DEPENDS:=@LINUX_2_6
+  KCONFIG:=CONFIG_EEPROM_93CX6
+  FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
+endef
+
+define KernelPackage/eeprom-93cx6/description
+ Kernel module for EEPROM 93CX6 support
+endef
+
+$(eval $(call KernelPackage,eeprom-93cx6))
+
+
+define KernelPackage/lp
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Parallel port and line printer support
+  DEPENDS:=@LINUX_2_4
+  KCONFIG:= \
+       CONFIG_PARPORT \
+       CONFIG_PRINTER \
+       CONFIG_PPDEV
+  FILES:= \
+       $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,parport lp)
+endef
+
+$(eval $(call KernelPackage,lp))

 
 

-define KernelPackage/loop
-  TITLE:=Loopback device support
-  DESCRIPTION:=Kernel module for loopback device support
-  KCONFIG:=$(CONFIG_BLK_DEV_LOOP)
-  SUBMENU:=$(EMENU)
-  AUTOLOAD:=$(call AutoLoad,30,loop)
-  FILES:=$(MODULES_DIR)/kernel/drivers/block/loop.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/pcspkr
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=PC speaker support
+  DEPENDS:=@LINUX_2_6
+  KCONFIG:=CONFIG_INPUT_PCSPKR
+  FILES:= \
+       $(LINUX_DIR)/drivers/input/misc/pcspkr.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50, \
+       pcspkr \
+  )

 endef
 endef

-$(eval $(call KernelPackage,loop))

 
 

-define KernelPackage/nbd
-  TITLE:=Network block device support
-  DESCRIPTION:=Kernel module for network block device support
-  KCONFIG:=$(CONFIG_BLK_DEV_NBD)
-  SUBMENU:=$(EMENU)
-  AUTOLOAD:=$(call AutoLoad,30,nbd)
-  FILES:=$(MODULES_DIR)/kernel/drivers/block/nbd.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/pcspkr/description
+ This enables sounds (tones) through the pc speaker

 endef
 endef

-$(eval $(call KernelPackage,nbd))

 
 

+$(eval $(call KernelPackage,pcspkr))

 
 define KernelPackage/pcmcia-core
 
 define KernelPackage/pcmcia-core

+  SUBMENU:=$(OTHER_MENU)

   TITLE:=PCMCIA/CardBus support
   TITLE:=PCMCIA/CardBus support

-  DESCRIPTION:=Kernel support for PCMCIA/CardBus controllers
-  SUBMENU:=$(EMENU)
-  KCONFIG:=$(CONFIG_PCMCIA)
+  DEPENDS:=@PCMCIA_SUPPORT
+  KCONFIG:= \
+       CONFIG_PCMCIA \
+       CONFIG_CARDBUS \
+       CONFIG_PCCARD \
+       PCMCIA_DEBUG=n

 endef
 
 define KernelPackage/pcmcia-core/2.4
 endef
 
 define KernelPackage/pcmcia-core/2.4

+#  KCONFIG:= \
+#      CONFIG_PCMCIA \
+#      CONFIG_CARDBUS

   FILES:= \
   FILES:= \

-       $(MODULES_DIR)/kernel/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,40,pcmcia_core yenta_socket ds)
+       $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/pcmcia/ds.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,25,pcmcia_core ds yenta_socket)

 endef
 
 define KernelPackage/pcmcia-core/2.6
 endef
 
 define KernelPackage/pcmcia-core/2.6

+#  KCONFIG:= \
+#      CONFIG_PCCARD \
+#      CONFIG_PCMCIA \
+#      PCMCIA_DEBUG=n

   FILES:= \
   FILES:= \

-       $(MODULES_DIR)/kernel/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia yenta_socket rsrc_nonstatic)
+       $(LINUX_DIR)/drivers/pcmcia/pcmcia_core.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/pcmcia/pcmcia.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,25,pcmcia_core pcmcia)

 endef
 endef

+
+define KernelPackage/pcmcia-core/description
+ Kernel support for PCMCIA/CardBus controllers
+endef
+

 $(eval $(call KernelPackage,pcmcia-core))
 
 
 $(eval $(call KernelPackage,pcmcia-core))
 
 

+define KernelPackage/pcmcia-yenta
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=yenta socket driver
+  DEPENDS:=@LINUX_2_6 kmod-pcmcia-core
+  KCONFIG:= \
+       CONFIG_PCCARD_NONSTATIC \
+       CONFIG_YENTA
+  FILES:= \
+       $(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/pcmcia/yenta_socket.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,41,rsrc_nonstatic yenta_socket)
+endef
+
+$(eval $(call KernelPackage,pcmcia-yenta))
+
+
+define KernelPackage/pcmcia-au1000
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=RMI/AMD Au1000 PCMCIA support
+  DEPENDS:=kmod-pcmcia-core @TARGET_au1000
+  FILES:=$(LINUX_DIR)/drivers/pcmcia/au1x00_ss.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,41,au1x00_ss)
+endef
+
+$(eval $(call KernelPackage,pcmcia-au1000))
+
+define KernelPackage/pcmcia-bcm63xx
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Broadcom BCM63xx PCMCIA support
+  DEPENDS:=kmod-pcmcia-core @TARGET_brcm63xx
+  KCONFIG:=CONFIG_PCMCIA_BCM63XX
+  FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+endef
+
+define KernelPackage/pcmcia-bcm63xx/description
+  Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+endef
+
+$(eval $(call KernelPackage,pcmcia-bcm63xx))
+

 define KernelPackage/pcmcia-serial
 define KernelPackage/pcmcia-serial

+  SUBMENU:=$(OTHER_MENU)

   TITLE:=Serial devices support
   TITLE:=Serial devices support

-  DESCRIPTION:=Kernel support for PCMCIA/CardBus serial devices

   DEPENDS:=kmod-pcmcia-core
   DEPENDS:=kmod-pcmcia-core

-  SUBMENU:=$(EMENU)
+  KCONFIG:= \
+       CONFIG_PCMCIA_SERIAL_CS \
+       CONFIG_SERIAL_8250_CS

   AUTOLOAD:=$(call AutoLoad,45,serial_cs)
 endef
 
 define KernelPackage/pcmcia-serial/2.4
   AUTOLOAD:=$(call AutoLoad,45,serial_cs)
 endef
 
 define KernelPackage/pcmcia-serial/2.4

-  KCONFIG:=$(CONFIG_PCMCIA_SERIAL_CS)
-  FILES:=$(MODULES_DIR)/kernel/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)
+#  KCONFIG:=CONFIG_PCMCIA_SERIAL_CS
+  FILES:=$(LINUX_DIR)/drivers/char/pcmcia/serial_cs.$(LINUX_KMOD_SUFFIX)

 endef
 
 define KernelPackage/pcmcia-serial/2.6
 endef
 
 define KernelPackage/pcmcia-serial/2.6

-  KCONFIG:=$(CONFIG_SERIAL_8250_CS)
-  FILES:=$(MODULES_DIR)/kernel/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
+#  KCONFIG:=CONFIG_SERIAL_8250_CS
+  FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
+endef
+
+define KernelPackage/pcmcia-serial/description
+ Kernel support for PCMCIA/CardBus serial devices

 endef
 endef

+

 $(eval $(call KernelPackage,pcmcia-serial))
 
 $(eval $(call KernelPackage,pcmcia-serial))
 

+define KernelPackage/ssb
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Silicon Sonics Backplane glue code
+  DEPENDS:=@LINUX_2_6 @PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+  KCONFIG:=\
+       CONFIG_SSB \
+       CONFIG_SSB_B43_PCI_BRIDGE=y \
+       CONFIG_SSB_DRIVER_MIPS=n \
+       CONFIG_SSB_DRIVER_PCICORE=y \
+       CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+       CONFIG_SSB_PCIHOST=y \
+       CONFIG_SSB_PCIHOST_POSSIBLE=y \
+       CONFIG_SSB_POSSIBLE=y \
+       CONFIG_SSB_SPROM=y \
+       CONFIG_SSB_SILENT=y
+  FILES:=$(LINUX_DIR)/drivers/ssb/ssb.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,29,ssb)
+endef
+
+define KernelPackage/ssb/description
+  Silicon Sonics Backplane glue code.
+endef
+
+$(eval $(call KernelPackage,ssb))
+

 
 define KernelPackage/bluetooth
 
 define KernelPackage/bluetooth

+  SUBMENU:=$(OTHER_MENU)

   TITLE:=Bluetooth support
   TITLE:=Bluetooth support

-  DESCRIPTION:=Kernel support for Bluetooth devices
-  SUBMENU:=$(EMENU)
- endef
+  DEPENDS:=@USB_SUPPORT +kmod-usb-core +!TARGET_x86:kmod-hid
+  KCONFIG:= \
+       CONFIG_BLUEZ \
+       CONFIG_BLUEZ_L2CAP \
+       CONFIG_BLUEZ_SCO \
+       CONFIG_BLUEZ_RFCOMM \
+       CONFIG_BLUEZ_BNEP \
+       CONFIG_BLUEZ_HCIUART \
+       CONFIG_BLUEZ_HCIUSB \
+       CONFIG_BLUEZ_HIDP \
+       CONFIG_BT \
+       CONFIG_BT_L2CAP \
+       CONFIG_BT_SCO \
+       CONFIG_BT_RFCOMM \
+       CONFIG_BT_BNEP \
+       CONFIG_BT_HCIBTUSB \
+       CONFIG_BT_HCIUSB \
+       CONFIG_BT_HCIUART \
+       CONFIG_BT_HIDP
+endef

 
 

- define KernelPackage/bluetooth/2.4
-  KCONFIG:=$(CONFIG_BLUEZ)
+define KernelPackage/bluetooth/2.4
+#  KCONFIG:= \
+#      CONFIG_BLUEZ \
+#      CONFIG_BLUEZ_L2CAP \
+#      CONFIG_BLUEZ_SCO \
+#      CONFIG_BLUEZ_RFCOMM \
+#      CONFIG_BLUEZ_BNEP \
+#      CONFIG_BLUEZ_HCIUART \
+#      CONFIG_BLUEZ_HCIUSB

   FILES:= \
   FILES:= \

-       $(MODULES_DIR)/kernel/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm hci_uart hci_usb)
+       $(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm bnep hci_uart hci_usb)

 endef
 
 define KernelPackage/bluetooth/2.6
 endef
 
 define KernelPackage/bluetooth/2.6

-  KCONFIG:=$(CONFIG_BT)
+#  KCONFIG:= \
+#      CONFIG_BT \
+#      CONFIG_BT_L2CAP \
+#      CONFIG_BT_SCO \
+#      CONFIG_BT_RFCOMM \
+#      CONFIG_BT_BNEP \
+#      CONFIG_BT_HCIUSB \
+#      CONFIG_BT_HCIUART

   FILES:= \
   FILES:= \

-       $(MODULES_DIR)/kernel/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
-       $(MODULES_DIR)/kernel/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm hci_uart hci_usb)
+       $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/net/bluetooth/hidp/hidp.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/bluetooth/btusb.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+endef
+
+define KernelPackage/bluetooth/description
+ Kernel support for Bluetooth devices

 endef
 endef

+

 $(eval $(call KernelPackage,bluetooth))
 
 
 $(eval $(call KernelPackage,bluetooth))
 
 

+define KernelPackage/mmc
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=MMC/SD Card Support
+  DEPENDS:=@LINUX_2_6
+  KCONFIG:= \
+       CONFIG_MMC \
+       CONFIG_MMC_BLOCK \
+       CONFIG_MMC_DEBUG=n \
+       CONFIG_MMC_UNSAFE_RESUME=n \
+       CONFIG_MMC_BLOCK_BOUNCE=y \
+       CONFIG_MMC_SDHCI=n \
+       CONFIG_MMC_TIFM_SD=n \
+       CONFIG_MMC_WBSD=n \
+       CONFIG_SDIO_UART=n
+  FILES:= \
+       $(LINUX_DIR)/drivers/mmc/core/mmc_core.$(LINUX_KMOD_SUFFIX) \
+       $(LINUX_DIR)/drivers/mmc/card/mmc_block.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
+endef
+
+define KernelPackage/mmc/description
+ Kernel support for MMC/SD cards
+endef
+
+$(eval $(call KernelPackage,mmc))
+
+
+define KernelPackage/mmc-at91
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=MMC/SD Card Support on AT91
+  DEPENDS:=@TARGET_at91 +kmod-mmc
+  KCONFIG:=CONFIG_MMC_AT91
+  FILES:=$(LINUX_DIR)/drivers/mmc/host/at91_mci.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,90,at91_mci,1)
+endef
+
+define KernelPackage/mmc-at91/description
+ Kernel support for MMC/SD cards on the AT91 target
+endef
+
+$(eval $(call KernelPackage,mmc-at91))
+
+
+# XXX: added a workaround for watchdog path changes
+ifeq ($(KERNEL),2.4)
+  WATCHDOG_DIR=char
+endif
+WATCHDOG_DIR?=watchdog
+
+define KernelPackage/atmel-wdt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=AT32AP700x watchdog
+  DEPENDS:=@TARGET_avr32
+  KCONFIG:=CONFIG_AT32AP700X_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/at32ap700x_wdt.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,at32ap700x_wdt)
+endef
+
+define KernelPackage/atmel-wdt/description
+ AT32AP700x watchdog
+endef
+
+$(eval $(call KernelPackage,atmel-wdt))
+
+

 define KernelPackage/softdog
 define KernelPackage/softdog

+  SUBMENU:=$(OTHER_MENU)

   TITLE:=Software watchdog driver
   TITLE:=Software watchdog driver

-  DESCRIPTION:=Software watchdog driver
-  SUBMENU:=$(EMENU)
-  KCONFIG:=$(CONFIG_SOFT_WATCHDOG)
-  FILES:=$(MODULES_DIR)/kernel/drivers/char/softdog.$(LINUX_KMOD_SUFFIX)
+  KCONFIG:=CONFIG_SOFT_WATCHDOG
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.$(LINUX_KMOD_SUFFIX)

   AUTOLOAD:=$(call AutoLoad,50,softdog)
 endef
   AUTOLOAD:=$(call AutoLoad,50,softdog)
 endef

+
+define KernelPackage/softdog/description
+ Software watchdog driver
+endef
+

 $(eval $(call KernelPackage,softdog))
 
 $(eval $(call KernelPackage,softdog))
 

+define KernelPackage/rdc321x-wdt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=RDC321x watchdog
+  DEPENDS:=@TARGET_rdc
+  KCONFIG:=CONFIG_RDC321X_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/rdc321x_wdt.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,rdc321x_wdt)
+endef
+
+define KernelPackage/rdc321x-wdt/description
+  RDC-321x watchdog driver
+endef
+
+$(eval $(call KernelPackage,rdc321x-wdt))
+
+
+define KernelPackage/leds-gpio
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=GPIO LED support
+  DEPENDS:= @GPIO_SUPPORT
+  KCONFIG:=CONFIG_LEDS_GPIO
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
+endef
+
+define KernelPackage/leds-gpio/description
+ Kernel module for LEDs on GPIO lines
+endef
+
+$(eval $(call KernelPackage,leds-gpio))
+
+
+define KernelPackage/ledtrig-adm5120-switch
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=LED ADM5120 Switch Port Status Trigger
+  DEPENDS:=@TARGET_adm5120
+  KCONFIG:=CONFIG_LEDS_TRIGGER_ADM5120_SWITCH
+  FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-adm5120-switch.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-adm5120-switch)
+endef
+
+define KernelPackage/ledtrig-adm5120-switch/description
+ Kernel module to allow LEDs to be controlled by the port states
+ of the ADM5120 built-in ethernet switch.
+endef
+
+$(eval $(call KernelPackage,ledtrig-adm5120-switch))
+
+
+define KernelPackage/leds-net48xx
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Soekris Net48xx LED support
+  DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
+  KCONFIG:=CONFIG_LEDS_NET48XX
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
+endef
+
+define KernelPackage/leds-net48xx/description
+ Kernel module for Soekris Net48xx LEDs
+endef
+
+$(eval $(call KernelPackage,leds-net48xx))
+
+
+define KernelPackage/leds-wrap
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=PCengines WRAP LED support
+  DEPENDS:=@TARGET_x86 +kmod-scx200-gpio
+  KCONFIG:=CONFIG_LEDS_WRAP
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
+endef
+
+define KernelPackage/leds-wrap/description
+ Kernel module for PCengines WRAP LEDs
+endef
+
+$(eval $(call KernelPackage,leds-wrap))
+
+
+define KernelPackage/leds-alix
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=PCengines ALIX LED support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_LEDS_ALIX2
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-alix2.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,leds-alix2)
+endef
+
+define KernelPackage/leds-alix/description
+ Kernel module for PCengines ALIX LEDs
+endef
+
+$(eval $(call KernelPackage,leds-alix))
+
+
+define KernelPackage/leds-wndr3700-usb
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=WNDR3700 USB LED support
+  DEPENDS:= @TARGET_ar71xx
+  KCONFIG:=CONFIG_LEDS_WNDR3700_USB
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
+endef
+
+define KernelPackage/leds-wndr3700-usb/description
+ Kernel module for the USB LED on the NETGWR WNDR3700 board.
+endef
+
+$(eval $(call KernelPackage,leds-wndr3700-usb))

 
 

-define KernelPackage/videodev
-  TITLE=Video4Linux support
-  DESCRIPTION:=Kernel modules for Video4Linux support
-  SUBMENU:=$(EMENU)
-  KCONFIG:=$(CONFIG_VIDEO_DEV)
-  FILES:=$(MODULES_DIR)/kernel/drivers/media/video/*.$(LINUX_KMOD_SUFFIX)
+
+define KernelPackage/leds-rb750
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=RouterBOARD 750 LED support
+  DEPENDS:=@TARGET_ar71xx
+  KCONFIG:=CONFIG_LEDS_RB750
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-rb750.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,leds-rb750)
+endef
+
+define KernelPackage/leds-rb750/description
+ Kernel module for the LEDs on the MikroTik RouterBOARD 750.
+endef
+
+$(eval $(call KernelPackage,leds-rb750))
+
+
+define KernelPackage/ledtrig-netdev
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=LED NETDEV Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
+  FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
+endef
+
+define KernelPackage/ledtrig-netdev/description
+ Kernel module to drive LEDs based on network activity.
+endef
+
+$(eval $(call KernelPackage,ledtrig-netdev))
+
+
+define KernelPackage/ledtrig-morse
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=LED Morse Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
+  FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
+endef
+
+define KernelPackage/ledtrig-morse/description
+ Kernel module to show morse coded messages on LEDs.
+endef
+
+$(eval $(call KernelPackage,ledtrig-morse))
+
+
+define KernelPackage/gpio-dev
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Generic GPIO char device support
+  DEPENDS:=@GPIO_SUPPORT
+  KCONFIG:=CONFIG_GPIO_DEVICE
+  FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+endef
+
+define KernelPackage/gpio-dev/description
+  Kernel module to allows control of GPIO pins using a character device.
+endef
+
+$(eval $(call KernelPackage,gpio-dev))
+
+
+define KernelPackage/nsc-gpio
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Natsemi GPIO support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_NSC_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
+endef
+
+define KernelPackage/nsc-gpio/description
+ Kernel module for Natsemi GPIO
+endef
+
+$(eval $(call KernelPackage,nsc-gpio))
+
+
+define KernelPackage/scx200-gpio
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Natsemi SCX200 GPIO support
+  DEPENDS:=@TARGET_x86 +kmod-nsc-gpio
+  KCONFIG:=CONFIG_SCx200_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
+endef
+
+define KernelPackage/scx200-gpio/description
+ Kernel module for SCX200 GPIO
+endef
+
+$(eval $(call KernelPackage,scx200-gpio))
+
+
+define KernelPackage/scx200-wdt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Natsemi SCX200 Watchdog support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_SCx200_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/scx200_wdt.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
+endef
+
+define KernelPackage/scx200-wdt/description
+ Kernel module for SCX200 Watchdog
+endef
+
+$(eval $(call KernelPackage,scx200-wdt))
+
+
+define KernelPackage/sc520-wdt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Natsemi SC520 Watchdog support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_SC520_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/sc520_wdt.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,sc520_wdt)
+endef
+
+define KernelPackage/sc520-wdt/description
+  Kernel module for SC520 Watchdog
+endef
+
+$(eval $(call KernelPackage,sc520-wdt))
+
+
+define KernelPackage/input-core
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Input device core
+  DEPENDS:=@LINUX_2_6 @!TARGET_x86
+  KCONFIG:=CONFIG_INPUT
+  FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,19,input-core)
+endef
+
+define KernelPackage/input-core/description
+ Kernel modules for support of input device
+endef
+
+$(eval $(call KernelPackage,input-core))
+
+
+define KernelPackage/input-evdev
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Input event device
+  DEPENDS:=+!TARGET_x86:kmod-input-core
+  KCONFIG:=CONFIG_INPUT_EVDEV
+  FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,evdev)
+endef
+
+define KernelPackage/input-evdev/description
+ Kernel modules for support of input device events
+endef
+
+$(eval $(call KernelPackage,input-evdev))
+
+
+define KernelPackage/hid
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=HID Devices
+  DEPENDS:=+kmod-input-core +kmod-input-evdev @!TARGET_x86
+  KCONFIG:=CONFIG_HID
+  FILES:=$(LINUX_DIR)/drivers/hid/hid.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,61,hid)
+endef
+
+define KernelPackage/hid/description
+ Kernel modules for HID devices
+endef
+
+$(eval $(call KernelPackage,hid))
+
+
+define KernelPackage/input-polldev
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Polled Input device support
+  DEPENDS:=+!TARGET_x86:kmod-input-core @LINUX_2_6
+  KCONFIG:=CONFIG_INPUT_POLLDEV
+  FILES:=$(LINUX_DIR)/drivers/input/input-polldev.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,input-polldev)
+endef
+
+define KernelPackage/input-polldev/description
+ Kernel module for support of polled input devices
+endef
+
+$(eval $(call KernelPackage,input-polldev))
+
+
+define KernelPackage/input-gpio-keys
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=GPIO key support
+  DEPENDS:= @GPIO_SUPPORT +!TARGET_x86:kmod-input-core
+  KCONFIG:=CONFIG_KEYBOARD_GPIO
+  FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
+endef
+
+define KernelPackage/input-gpio-keys/description
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys))
+
+
+define KernelPackage/input-gpio-buttons
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Polled GPIO buttons input device
+  DEPENDS:=@GPIO_SUPPORT +kmod-input-polldev
+  KCONFIG:= \
+       CONFIG_INPUT_GPIO_BUTTONS \
+       CONFIG_INPUT_MISC=y
+  FILES:=$(LINUX_DIR)/drivers/input/misc/gpio_buttons.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,62,gpio_buttons)
+endef
+
+define KernelPackage/input-gpio-buttons/description
+ Kernel module for support polled GPIO buttons input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-buttons))
+
+define KernelPackage/input-joydev
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Joystick device support
+  DEPENDS:=+!TARGET_x86:kmod-input-core
+  KCONFIG:=CONFIG_INPUT_JOYDEV
+  FILES:=$(LINUX_DIR)/drivers/input/joydev.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,62,joydev)
+endef
+
+define KernelPackage/input-joydev/description
+  Kernel module for joystick support
+endef
+
+$(eval $(call KernelPackage,input-joydev))
+
+define KernelPackage/input-rb532
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=RB532 button device support
+  DEPENDS:=+kmod-input-core @TARGET_rb532
+  KCONFIG:= \
+       CONFIG_INPUT_MISC=y \
+       CONFIG_INPUT_RB532_BUTTON
+  FILES:=$(LINUX_DIR)/drivers/input/misc/rb532_button.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,62,rb532_button)
+endef
+
+define KernelPackage/input-rb532/description
+  Kernel module for RB532 button
+endef
+
+$(eval $(call KernelPackage,input-rb532))
+
+
+define KernelPackage/mmc-atmelmci
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Amtel MMC Support
+  DEPENDS:=@TARGET_avr32 +kmod-mmc
+  KCONFIG:=CONFIG_MMC_ATMELMCI
+  FILES:=$(LINUX_DIR)/drivers/mmc/host/atmel-mci.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,90,atmel-mci)
+endef
+
+define KernelPackage/mmc-atmelmci/description
+ Kernel support for  Atmel Multimedia Card Interface.

 endef
 
 endef
 

-define KernelPackage/videodev/2.4
-  AUTOLOAD:=$(call AutoLoad,60,videodev)
+$(eval $(call KernelPackage,mmc-atmelmci,1))
+
+
+define KernelPackage/cs5535-gpio
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=AMD CS5535/CS5536 GPIO driver
+  DEPENDS:=@TARGET_x86||@TARGET_olpc
+  KCONFIG:=CONFIG_CS5535_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,cs5535_gpio)
+endef
+
+define KernelPackage/cs5535-gpio/description
+ This package contains the AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,cs5535-gpio))
+
+
+define KernelPackage/ixp4xx-beeper
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=IXP4XX Beeper support
+  DEPENDS:=@TARGET_ixp4xx +kmod-input-core
+  KCONFIG:= \
+       CONFIG_INPUT_MISC=y \
+       CONFIG_INPUT_IXP4XX_BEEPER
+  FILES:=$(LINUX_DIR)/drivers/input/misc/ixp4xx-beeper.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,ixp4xx-beeper)

 endef
 
 endef
 

-define KernelPackage/videodev/2.6
-  AUTOLOAD:=$(call AutoLoad,60,v4l2-common videodev)
+define KernelPackage/ixp4xx-beeper/description
+ IXP4XX Beeper support

 endef
 endef

-$(eval $(call KernelPackage,videodev))

 
 

+$(eval $(call KernelPackage,ixp4xx-beeper))
+
+
+define KernelPackage/textsearch
+SUBMENU:=$(OTHER_MENU)
+  TITLE:=Textsearch support is selected if needed
+  DEPENDS:=@LINUX_2_6
+  KCONFIG:= \
+    CONFIG_TEXTSEARCH=y \
+    CONFIG_TEXTSEARCH_KMP \
+    CONFIG_TEXTSEARCH_BM \
+    CONFIG_TEXTSEARCH_FSM
+  FILES:= \
+    $(LINUX_DIR)/lib/ts_kmp.$(LINUX_KMOD_SUFFIX) \
+    $(LINUX_DIR)/lib/ts_bm.$(LINUX_KMOD_SUFFIX) \
+    $(LINUX_DIR)/lib/ts_fsm.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+endef
+
+$(eval $(call KernelPackage,textsearch))
+
+
+define KernelPackage/rfkill
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=RF switch subsystem support
+  DEPENDS:=@TARGET_x86||TARGET_olpc||TARGET_s3c24xx||TARGET_brcm47xx||TARGET_ar71xx
+  KCONFIG:= \
+    CONFIG_RFKILL \
+    CONFIG_RFKILL_INPUT=y \
+    CONFIG_RFKILL_LEDS=y
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.31)),1)
+  FILES:= \
+    $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,rfkill)
+else
+  FILES:= \
+    $(LINUX_DIR)/net/rfkill/rfkill.$(LINUX_KMOD_SUFFIX) \
+    $(LINUX_DIR)/net/rfkill/rfkill-input.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,20,rfkill rfkill-input)
+endif
+endef
+
+define KernelPackage/rfkill/description
+  Say Y here if you want to have control over RF switches
+  found on many WiFi and Bluetooth cards.
+endef
+
+$(eval $(call KernelPackage,rfkill))
+
+define KernelPackage/geodewdt
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Geode/LX Watchdog timer
+  DEPENDS:=@TARGET_x86 @LINUX_2_6
+  KCONFIG:=CONFIG_GEODE_WDT
+  FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,geodewdt)
+endef
+
+define KernelPackage/geodewdt/description
+  Kernel module for Geode watchdog timer.
+endef
+
+$(eval $(call KernelPackage,geodewdt))
+
+define KernelPackage/pc8736x-gpio
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=PC8736x GPIO support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_PC8736x_GPIO
+  FILES:=$(LINUX_DIR)/drivers/char/pc8736x_gpio.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,40,pc8736x_gpio)
+endef
+
+define KernelPackage/pc8736x-gpio/description
+ Kernel module for PC8736x GPIO
+endef

 
 

+$(eval $(call KernelPackage,pc8736x-gpio))