when changing the mac address of a bridge interface, keep member interface addresses...

[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / tl-wr1043nd / network

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network b/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network
index 7916286..7e710f2 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network
@@ -1,26 +1,31 @@
-config interface loopback
-       option ifname   lo
-       option proto    static
-       option ipaddr   127.0.0.1
-       option netmask  255.0.0.0
+config 'interface' 'loopback'
+       option 'ifname'   'lo'
+       option 'proto'    'static'
+       option 'ipaddr'   '127.0.0.1'
+       option 'netmask'  '255.0.0.0'

 
 

-config interface lan
-       option ifname   eth0
-       option type     bridge
-       option proto    static
-       option ipaddr   192.168.1.1
-       option netmask  255.255.255.0
+config 'interface' 'lan'
+        option 'ifname'   'eth0.1'
+        option 'type'     'bridge'
+        option 'proto'    'static'
+        option 'ipaddr'   '192.168.1.1'
+        option 'netmask'  '255.255.255.0'

 
 

-config interface wan
-       option ifname   eth1
-       option proto    dhcp
+config 'interface' 'wan'
+        option 'ifname' 'eth0.2'
+        option 'proto' 'dhcp'

 
 

-config switch
-       option name     rtl8366-smi
-       option reset    1
-       option enable_vlan 1
+config 'switch'
+       option 'name' 'rtl8366rb'
+        option 'reset' '1'
+        option 'enable_vlan' '1'

 
 

-config switch_vlan
-       option device   rtl8366-smi
-       option vlan     0
-       option ports    "0 1 2 3 5"
+config 'switch_vlan'
+        option 'device' 'rtl8366rb'
+        option 'vlan' '1'
+        option 'ports' '1 2 3 4 5t'
+
+config 'switch_vlan'
+        option 'device' 'rtl8366rb'
+        option 'vlan' '2'
+        option 'ports' '0 5t'