[atheros] sync 2.6.26 config

[openwrt.git] / target / linux / rdc / image / Makefile

diff --git a/target/linux/rdc/image/Makefile b/target/linux/rdc/image/Makefile
index 3382a1d..ecfe7ff 100644 (file)
--- a/target/linux/rdc/image/Makefile
+++ b/target/linux/rdc/image/Makefile
@@ -7,8 +7,14 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+ifeq ($(CONFIG_LINUX_2_6_23),y)
+ARCH_PATH=i386
+else
+ARCH_PATH=x86
+endif
+
 define Image/Prepare
-       $(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage
+       $(CP) $(LINUX_DIR)/arch/$(ARCH_PATH)/boot/bzImage $(KDIR)/bzImage
 endef
 
 define trxalign/jffs2-128k
@@ -22,11 +28,12 @@ bs=1024
 endef
 
 define Image/Build/ar525w
-       touch $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-       mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
-       dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
-       $(RM) $(KDIR)/root.tmp
-       $(STAGING_DIR_HOST)/bin/airlink -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+       touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2)-web.img
+       dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
+       mv $(KDIR)/root.tmp $(KDIR)/root.$(1)
+       $(STAGING_DIR_HOST)/bin/airlink -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       $(STAGING_DIR_HOST)/bin/airlink -e -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2)-web.img
 endef
 
 define Image/Build/wl153
@@ -34,23 +41,41 @@ define Image/Build/wl153
        gzip -9c $(KDIR)/root.$(1) > $(KDIR)/root.$(1).gz
        ls -l $(KDIR)/root.$(1).gz | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
        echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/bzSize)\x$$$$(cut -c 5,6 < $(KDIR)/bzSize)\x$$$$(cut -c 3,4 < $(KDIR)/bzSize)\x$$$$(cut -c 1,2 < $(KDIR)/bzSize)" > $(KDIR)/bzSize.tmp
-       echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-       cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-       echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
-       cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+       echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
        $(RM) $(KDIR)/bzSize.tmp $(KDIR)/bzSize $(KDIR)/rdSize
+       if [ `ls -l $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/'` -gt $$$$((0xffff0000-0xffe08000)) ]; then mv $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img.too_big; echo "#ERR image too big"; fi 
 endef
 
 define Image/Build/dir450
-       touch $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+       touch $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).img
+       dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
+       mv $(KDIR)/root.tmp $(KDIR)/root.$(1)
+       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/onlyrootfs-$(BOARD)-$(1)-$(2).img
+endef
+
+define Image/Build/g570s
        mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
        dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
-       $(RM) $(KDIR)/root.tmp
-       cp $(KDIR)/root.$(1) $(BIN_DIR)/onlyrootfs-$(BOARD)-$(1)-$(2).img
+       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img
+       dd of=$(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img if=/dev/null bs=1024 seek=1024
+       cat $(KDIR)/root.$(1) >> $(BIN_DIR)/openwrt-tftp-$(BOARD)-$(1)-$(2).img
+       if [ ! -x $(STAGING_DIR_HOST)/bin/zyxel_combine ]; then echo "#ERR Please copy the ZyXEL \"combine\" tool as $(STAGING_DIR_HOST)/bin/zyxel_combine to build."; fi
+       sh -c "mkdir $(KDIR)/zyxel.tmp && cd $(KDIR)/zyxel.tmp && mv ../root.tmp initrd.bin && cp ../bzImage kernel.bin && $(STAGING_DIR_HOST)/bin/zyxel_combine -mcf kernel.bin initrd.bin && mv image $(BIN_DIR)/openwrt-$(BOARD)-$(1)-$(2).rmt" || :
+       $(RM) -r $(KDIR)/zyxel.tmp
+endef
+
+define Image/Build/amit
+       if [ ! -x $(STAGING_DIR_HOST)/bin/amit_makebin ]; then echo "#ERR Please copy the AMIT \"makebin\" tool from http://mgb111.pradnik.net/ as $(STAGING_DIR_HOST)/bin/amit_makebin to build."; fi
+       sh -c "mkdir -p $(KDIR)/amit.tmp/linux_src/arch/i386/boot $(KDIR)/amit.tmp/rom_disk && cd $(KDIR)/amit.tmp && ln -s ../../root.$(1) rom_disk/fs.img && ln -s ../../../../../bzImage linux_src/arch/i386/boot && $(STAGING_DIR_HOST)/bin/amit_makebin && mv upgrade.img $(BIN_DIR)/openwrt-$(BOARD)-$(1)-anas350.bin" || :
+       $(RM) -r $(KDIR)/amit.tmp
+       $(STAGING_DIR_HOST)/bin/makeamitbin -o $(BIN_DIR)/openwrt-$(BOARD)-$(1)-ar360w3g.bin -1 ALK_ATG001 -2 Atropos linux3g $(KDIR)/bzImage ramdisk3g $(KDIR)/root.$(1)
 endef
 
 define Image/Build
-       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).bzImage
+       $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD).bzImage
        $(call Image/Build/$(PROFILE),$(1),$(PROFILE),$(patsubst jffs2-%k,%,$(1)))
 endef