firmware-utils/mkzynfw: add support for the NBG460N board
[openwrt.git] / package / madwifi / Makefile
index 09995e0..4f01f00 100644 (file)
-# 
-# Copyright (C) 2006-2008 OpenWrt.org
+#
+# Copyright (C) 2006-2009 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-# $Id$
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
+
 PKG_REV:=3314
 PKG_VERSION:=r$(PKG_REV)
-# PKG_BRANCH:=madwifi-dfs
-PKG_RELEASE:=1
+PKG_RELEASE:=4
 
 PKG_SOURCE_PROTO:=svn
 PKG_SOURCE_VERSION:=$(PKG_REV)
 PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE_URL:=http://madwifi-project.org/svn/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
 PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
 
+HAL_VERSION:=20090508
+HAL_FILE:=ath_hal-$(HAL_VERSION).tgz
+HAL_MD5SUM:=4ab7ae8bdb96c0be388c98bf8f92d5ca
+
+PKG_BUILD_DEPENDS:=wprobe
+
 include $(INCLUDE_DIR)/package.mk
 
-ifdef CONFIG_MADWIFI_BUS_DEFAULT
-  ifneq ($(CONFIG_TARGET_atheros),)
-    BUS:=AHB
-  else
-    ifneq ($(CONFIG_PCI_SUPPORT),)
-      BUS:=PCI
-    endif
-  endif
+ifdef CONFIG_MADWIFI_COMPRESSION
+  COMPRESSION:=1
+else
+  COMPRESSION:=0
+endif
 
-  # XXX: remove this check later when we have PCI support properly detected on all targets
-  ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
-    BUS:=
-  endif
+define Download/hal
+  FILE:=$(HAL_FILE)
+  URL:=http://mirror2.openwrt.org/sources
+  MD5SUM:=$(HAL_MD5SUM)
+endef
+$(eval $(call Download,hal))
+
+
+ifneq ($(CONFIG_TARGET_atheros),)
+  BUS:=AHB
 else
-  ifdef CONFIG_MADWIFI_BUS_PCI
+  ifneq ($(CONFIG_PCI_SUPPORT),)
     BUS:=PCI
-  else
-    ifdef CONFIG_MADWIFI_BUS_AHB
-      BUS:=AHB
-    endif
   endif
 endif
 
-ifdef CONFIG_MADWIFI_HAL_DEFAULT
+ifneq ($(CONFIG_CPU_MIPS32_R2),)
   ifeq ($(ARCH),mips)
-    HAL_TARGET:=mips-be-elf
+    HAL_TARGET:=mips32r2-be-elf
   endif
   ifeq ($(ARCH),mipsel)
-    HAL_TARGET:=mips-le-elf
-  endif
-  ifeq ($(ARCH),i386)
-    HAL_TARGET:=i386-elf
-  endif
-  ifeq ($(ARCH),i686)
-    HAL_TARGET:=i386-elf
-  endif
-  ifeq ($(BOARD),ixp4xx)
-    HAL_TARGET:=xscale-be-elf
-  endif
-  ifeq ($(BOARD),iop32x)
-    HAL_TARGET:=xscale-le-elf
-  endif
-  ifeq ($(ARCH),powerpc)
-    HAL_TARGET:=powerpc-be-elf
-  endif
-  ifeq ($(BOARD),storm)
-    HAL_TARGET:=armv4-le-elf
-  endif
-  ifneq ($(CONFIG_TARGET_atheros),)
-    HAL_TARGET:=ap51
+    HAL_TARGET:=mips32r2-le-elf
   endif
 else
-  ifdef CONFIG_MADWIFI_HAL_MIPS_BE_ELF
-    HAL_TARGET:=mips-be-elf
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_MIPS_LE_ELF
-    HAL_TARGET:=mips-le-elf
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_I386_ELF
-    HAL_TARGET:=i386-elf
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_XSCALE_BE_ELF
-    HAL_TARGET:=xscale-be-elf
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_XSCALE_LE_ELF
-    HAL_TARGET:=xscale-le-elf
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_ARMV4_LE_ELF
-    HAL_TARGET:=armv4-le-elf
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_AP30
-    HAL_TARGET:=ap30
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_AP43
-    HAL_TARGET:=ap43
-  endif
-
-  ifdef CONFIG_MADWIFI_HAL_AP51
-    HAL_TARGET:=ap51
+  ifeq ($(ARCH),mips)
+    HAL_TARGET:=mips32-be-elf
   endif
-
-  ifdef CONFIG_MADWIFI_HAL_AP61
-    HAL_TARGET:=ap61
+  ifeq ($(ARCH),mipsel)
+    HAL_TARGET:=mips32-le-elf
   endif
-
+endif
+ifeq ($(ARCH),i386)
+  HAL_TARGET:=i386-elf
+endif
+ifeq ($(ARCH),i686)
+  HAL_TARGET:=i386-elf
+endif
+ifeq ($(BOARD),ixp4xx)
+  HAL_TARGET:=xscale-be-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
+ifeq ($(BOARD),iop32x)
+  HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
+ifeq ($(BOARD),kirkwood)
+  HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
+ifeq ($(BOARD),orion)
+  HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
+ifeq ($(ARCH),powerpc)
+  HAL_TARGET:=powerpc-be-elf
+endif
+ifeq ($(BOARD),gemini)
+  HAL_TARGET:=armv4-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
+ifneq ($(CONFIG_TARGET_atheros),)
+  HAL_TARGET:=wisoc
 endif
 
 ifdef CONFIG_MADWIFI_RCA_MINSTREL
@@ -135,6 +111,9 @@ ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
   RATE_CONTROL:=sample
 endif
 
+ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
+MADWIFI_FILES:= $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX)
+else
 MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
@@ -145,9 +124,13 @@ MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
-       $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX)
+endif
 
-MADWIFI_AUTOLOAD:= \
+ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
+  MADWIFI_AUTOLOAD:= ath_hal
+else
+  MADWIFI_AUTOLOAD:= \
        wlan \
        wlan_scan_ap \
        wlan_scan_sta \
@@ -157,7 +140,8 @@ MADWIFI_AUTOLOAD:= \
        wlan_ccmp \
        wlan_tkip \
        wlan_wep \
-       wlan_xauth \
+       wlan_xauth
+endif
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
@@ -168,19 +152,20 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
   MADWIFI_AUTOLOAD+= ath_pci
 endif
 
-MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig
+MADWIFI_APPLETS:=80211stats athchans athkey athstats wlanconfig ath_info madwifi_multi
 ifdef CONFIG_MADWIFI_DEBUG
-  MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
+  MADWIFI_APPLETS += athdebug 80211debug
 endif
 
-
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
-  URL:=http://madwifi.org/
-  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  URL:=http://madwifi-project.org/
+  MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
+  DEPENDS:=+wireless-tools @LINUX_2_6 @PCI_SUPPORT @(!(TARGET_avr32||TARGET_cobalt||TARGET_ep93xx||TARGET_etrax||TARGET_octeon||TARGET_pxcab||TARGET_sibyte)||BROKEN)
   FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
+  MENU:=1
 endef
 
 define KernelPackage/madwifi/description
@@ -188,40 +173,59 @@ define KernelPackage/madwifi/description
 endef
 
 define KernelPackage/madwifi/config
-       menu "MadWifi Configuration"
-               depends on PACKAGE_kmod-madwifi
-               source "$(SOURCE)/Config.in"
-       endmenu
+       source "$(SOURCE)/Config.in"
 endef
 
+MADWIFI_INC = \
+       -I$(PKG_BUILD_DIR) \
+       -I$(PKG_BUILD_DIR)/include \
+       -I$(PKG_BUILD_DIR)/hal \
+       -I$(PKG_BUILD_DIR)/ath \
+       -I$(PKG_BUILD_DIR)/ath_hal \
+       -I$(PKG_BUILD_DIR)/net80211 \
+       -I$(STAGING_DIR)/usr/include/wprobe \
+       -include $(PKG_BUILD_DIR)/include/compat.h
+
 MAKE_ARGS:= \
        PATH="$(TARGET_PATH)" \
        ARCH="$(LINUX_KARCH)" \
+       ARCH-y="$(LINUX_KARCH)" \
        CROSS_COMPILE="$(TARGET_CROSS)" \
        TARGET="$(HAL_TARGET)" \
        TOOLPREFIX="$(KERNEL_CROSS)" \
        TOOLPATH="$(KERNEL_CROSS)" \
        KERNELPATH="$(LINUX_DIR)" \
        LDOPTS="--no-warn-mismatch " \
-       ATH_RATE="ath_rate/$(RATE_CONTROL)" \
-       WARNINGS="-Wno-unused" \
-       $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG="") \
-       DOMULTI=1
+       ATH_RATE="$(RATE_CONTROL)" \
+       ATH_CAP_SUPERG_COMP="$(COMPRESSION)" \
+       DO_MULTI=1 \
+       SINGLE_MODULE=$(if $(CONFIG_MADWIFI_SINGLE_MODULE),1) \
+       INCS="$(MADWIFI_INC)" \
+       $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
 
 MAKE_VARS:= \
-       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
+       COPTS="-DATH_REVERSE_ENGINEERING=1" \
 
-HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
-ifneq ($(HALFILE),)
-  define Build/Prepare
-       $(call Build/Prepare/Default)
+define Build/Prepare/HAL
        rm -rf $(PKG_BUILD_DIR)/tmp
        mkdir -p $(PKG_BUILD_DIR)/tmp
-       tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+       tar xvzf $(DL_DIR)/$(HAL_FILE) -C $(PKG_BUILD_DIR)/tmp
        $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
        rm -rf $(PKG_BUILD_DIR)/tmp
-  endef
-endif
+endef
+
+define Build/Prepare
+       $(call Build/Prepare/Default)
+       $(call Build/Prepare/HAL)
+       # patch cflags
+       $(SED) 's, -E[LB],,' \
+               -e 's, -mips2,,' \
+               -e 's, -mapcs-32,,' \
+               -e 's, -mlong-calls,,' \
+               $(PKG_BUILD_DIR)/hal/public/*.inc
+       $(SED) 's,march=armv4,march=armv5te,' \
+               $(PKG_BUILD_DIR)/hal/public/xscale*.inc
+endef
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb
@@ -254,10 +258,9 @@ define Build/InstallDev
 endef
 
 define KernelPackage/madwifi/install
-       $(INSTALL_DIR) $(1)/lib/wifi
-       $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
        $(INSTALL_DIR) $(1)/usr/sbin
-       $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,$(MADWIFI_APPLETS)} $(1)/usr/sbin/
+       $(CP) ./files/* $(1)/
+       $(CP) $(foreach applet,$(MADWIFI_APPLETS),$(PKG_BUILD_DIR)/tools/$(applet)) $(1)/usr/sbin/
 endef
 
 $(eval $(call KernelPackage,madwifi))
This page took 0.031119 seconds and 4 git commands to generate.