[rdc] also override the default console settings, not all boards set it (e.g: RDC...

[openwrt.git] / target / linux / adm5120 / router_le / base-files / sbin / wget2nand

diff --git a/target/linux/adm5120/router_le/base-files/sbin/wget2nand b/target/linux/adm5120/router_le/base-files/sbin/wget2nand
index 8843c28..20be458 100755 (executable)
--- a/target/linux/adm5120/router_le/base-files/sbin/wget2nand
+++ b/target/linux/adm5120/router_le/base-files/sbin/wget2nand
@@ -8,8 +8,13 @@
 # Based on cf2nand from RB532 support
 . /etc/functions.sh
 
-[ -d /tmp/wget2nand ] && {
-       echo "/tmp/wget2nand already exists"
+[ -d /tmp/wget2nand-rootfs ] && {
+       echo "/tmp/wget2nand-rootfs already exists"
+       exit 1
+}
+
+[ -d /tmp/wget2nand-kernel ] && {
+       echo "/tmp/wget2nand-kernel already exists"
        exit 1
 }
 
@@ -21,49 +26,53 @@ url=$1
         exit 1
 }
 
-
 # first get an address for br-lan using udhcpc
 killall udhcpc
 /sbin/udhcpc -i br-lan
 
-boot="$(find_mtd_part 'RouterBoard NAND Boot')"
-main="$(find_mtd_part 'rootfs')"
-[ -z "$boot" -o -z "$main" ] && {
+mtd_kernel="$(find_mtd_part 'kernel')"
+mtd_rootfs="$(find_mtd_part 'rootfs')"
+[ -z "$mtd_kernel" -o -z "$mtd_rootfs" ] && {
        echo "Cannot find NAND Flash partitions"
        exit 1
 }
 
-echo "Erasing filesystem."
-mtd erase Boot 2>/dev/null >/dev/null
-mtd erase Main 2>/dev/null >/dev/null
+echo "Erasing filesystem..."
+mtd erase kernel 2>/dev/null >/dev/null
+mtd erase rootfs 2>/dev/null >/dev/null
 
-echo "Mounting $main as new root and $boot as boot partition"
+echo "Mounting $mtd_rootfs as new root and $mtd_kernel as kernel partition"
 
-mkdir /tmp/wget2nand/
-mkdir /tmp/wget2nand-boot
-mount -t yaffs2 "$main" /tmp/wget2nand/
-mount -t yaffs2 "$boot" /tmp/wget2nand-boot
+mkdir /tmp/wget2nand-rootfs
+mkdir /tmp/wget2nand-kernel
+mount -t yaffs2 "$mtd_rootfs" /tmp/wget2nand-rootfs
+mount -t yaffs2 "$mtd_kernel" /tmp/wget2nand-kernel
 
-echo "Erasing existing files."
-rm -rf /tmp/wget2nand/*
+echo "Erasing existing files..."
+rm -rf /tmp/wget2nand-rootfs/*
 
 echo "Copying filesystem..."
-( wget -O - $url/openwrt-adm5120-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz )
+( wget -O - $url/openwrt-adm5120-rootfs.tgz) | ( cd /tmp/wget2nand-rootfs/; tar xvz )
 # RouterBOOT is looking for a kernel named "kernel"
-wget -O /tmp/wget2nand-boot/kernel $url/openwrt-adm5120-2.6-rb1xx-kernel
+wget -O /tmp/wget2nand-kernel/kernel $url/openwrt-adm5120-rb1xx-kernel
 
-chmod +x /tmp/wget2nand-boot/kernel
+chmod +x /tmp/wget2nand-kernel/kernel
 
 # make sure everything is written before we unmount the partitions
-echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission
+echo "chmod ugo+x /" > /tmp/wget2nand-rootfs/etc/uci-defaults/set_root_permission
 sync
-ls /tmp/wget2nand-boot/
-ls /tmp/wget2nand/
+ls /tmp/wget2nand-kernel/
+ls /tmp/wget2nand-rootfs/
+# use kexec if present
+[ -x /usr/sbin/kexec ] && {
+       kexec -l /tmp/wget2nand-kernel/kernel --command-line="$(cat /proc/cmdline) rootfstype=yaffs2 root=$mtd_kernel"
+       kexec -e
+}
 # unmount the partitions and remove the directories into which they were mounted
-umount /tmp/wget2nand-boot
-umount /tmp/wget2nand
-rmdir /tmp/wget2nand-boot
-rmdir /tmp/wget2nand
+umount /tmp/wget2nand-kernel
+umount /tmp/wget2nand-rootfs
+rmdir /tmp/wget2nand-kernel
+rmdir /tmp/wget2nand-rootfs
 
 # all done
 echo "Image written, you can now reboot.  Remember to change the boot source to Boot from Nand"