-Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.27.3.orig/arch/arm/mach-ixp4xx/Kconfig 2008-11-05 19:31:20.000000000 +0000
-+++ linux-2.6.27.3/arch/arm/mach-ixp4xx/Kconfig 2008-11-05 20:10:26.000000000 +0000
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -97,6 +97,14 @@ config MACH_SIDEWINDER
Engineering Sidewinder board. For more information on this
platform, see http://www.adiengineering.com
config MACH_COMPEX
bool "Compex WP18 / NP18A"
select PCI
-Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.27.3.orig/arch/arm/mach-ixp4xx/Makefile 2008-11-05 19:31:20.000000000 +0000
-+++ linux-2.6.27.3/arch/arm/mach-ixp4xx/Makefile 2008-11-05 20:10:26.000000000 +0000
-@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
+ obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
+obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
obj-y += common.o
-@@ -46,6 +47,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
+@@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
+ obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
+obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-pci.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-pci.c 2008-11-05 22:51:20.000000000 +0000
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arch/mach-ixp4xx/usr8200-pci.c
+}
+
+subsys_initcall(usr8200_pci_init);
-Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-setup.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-setup.c 2008-11-05 20:23:32.000000000 +0000
-@@ -0,0 +1,187 @@
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
+@@ -0,0 +1,212 @@
+/*
+ * arch/arm/mach-ixp4xx/usr8200-setup.c
+ *
+ .resource = usr8200_uart_resources,
+};
+
-+/*
-+static struct i2c_gpio_platform_data usr8200_i2c_gpio_data = {
-+ .sda_pin = 9,
-+ .scl_pin = 10,
-+};
-+
-+static struct platform_device usr8200_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usr8200_i2c_gpio_data,
-+ },
-+};
-+
+static struct gpio_led usr8200_led_pin[] = {
+ {
-+ .name = "usr8200:green:status",
-+ .gpio = 7,
++ .name = "usr8200:usb1",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:usb2",
++ .gpio = 1,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:ieee1394",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:internal",
++ .gpio = 3,
++ .active_low = 1,
++ },
++ {
++ .name = "usr8200:power",
++ .gpio = 14,
+ }
+};
+
+static struct gpio_led_platform_data usr8200_led_data = {
-+ .num_leds = 1,
++ .num_leds = ARRAY_SIZE(usr8200_led_pin),
+ .leds = usr8200_led_pin,
+};
+
+ .id = -1,
+ .dev.platform_data = &usr8200_led_data,
+};
-+*/
+
+static struct eth_plat_info usr8200_plat_eth[] = {
-+ {
-+ .phy = 16,
++ { /* NPEC - LAN with Marvell 88E6060 switch */
++ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
++ .phy_mask = 0x0F0000,
+ .rxq = 4,
+ .txreadyq = 21,
-+ }, {
++ }, { /* NPEB - WAN */
+ .phy = 9,
+ .rxq = 3,
+ .txreadyq = 20,
+ }
+};
+
++static struct resource usr8200_rtc_resources = {
++ .flags = IORESOURCE_MEM
++};
++
++static struct platform_device usr8200_rtc = {
++ .name = "rtc7301",
++ .id = 0,
++ .num_resources = 1,
++ .resource = &usr8200_rtc_resources,
++};
++
+static struct platform_device *usr8200_devices[] __initdata = {
+ &usr8200_flash,
+ &usr8200_uart,
-+/* &usr8200_led,
-+ &usr8200_i2c_gpio, */
++ &usr8200_led,
+ &usr8200_eth[0],
+ &usr8200_eth[1],
++ &usr8200_rtc,
+};
+
+static void __init usr8200_init(void)
+ ixp4xx_sys_init();
+
+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
++ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
++ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++ *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
++ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
++ *IXP4XX_GPIO_GPCLKR = 0x01100000;
++
++ /* configure button as input */
++ gpio_line_config(12, IXP4XX_GPIO_IN);
+
+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
+}
+ .boot_params = 0x0100,
+ .init_machine = usr8200_init,
+MACHINE_END
-Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-===================================================================
---- linux-2.6.27.3.orig/arch/arm/mach-ixp4xx/include/mach/uncompress.h 2008-11-05 20:11:38.000000000 +0000
-+++ linux-2.6.27.3/arch/arm/mach-ixp4xx/include/mach/uncompress.h 2008-11-05 20:12:11.000000000 +0000
+--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
++++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
machine_is_gateway7001() || machine_is_wg302v2() ||
projects / openwrt.git / blobdiff