strip the kernel version suffix from target directories, except for brcm-2.4 (the...

[openwrt.git] / target / linux / atheros-2.6 / files / arch / mips / atheros / ar531x.h

diff --git a/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h b/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h
deleted file mode 100644 (file)
index 208b010..0000000
--- a/target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef __AR531X_H
-#define __AR531X_H
-
-#include <ar531x_platform.h>
-#include "ar5312.h"
-#include "ar5315.h"
-
-#define MIPS_CPU_IRQ_BASE              0x00
-#define AR531X_HIGH_PRIO                0x10
-#define AR531X_MISC_IRQ_BASE           0x20
-#define AR531X_GPIO_IRQ_BASE            0x30
-
-/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-#define AR531X_IRQ_NONE                MIPS_CPU_IRQ_BASE+0
-#define AR531X_IRQ_CPU_CLOCK   MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-
-/* Miscellaneous interrupts, which share IP6 */
-#define AR531X_MISC_IRQ_NONE           AR531X_MISC_IRQ_BASE+0
-#define AR531X_MISC_IRQ_TIMER          AR531X_MISC_IRQ_BASE+1
-#define AR531X_MISC_IRQ_AHB_PROC       AR531X_MISC_IRQ_BASE+2
-#define AR531X_MISC_IRQ_AHB_DMA                AR531X_MISC_IRQ_BASE+3
-#define AR531X_MISC_IRQ_GPIO           AR531X_MISC_IRQ_BASE+4
-#define AR531X_MISC_IRQ_UART0          AR531X_MISC_IRQ_BASE+5
-#define AR531X_MISC_IRQ_UART0_DMA      AR531X_MISC_IRQ_BASE+6
-#define AR531X_MISC_IRQ_WATCHDOG       AR531X_MISC_IRQ_BASE+7
-#define AR531X_MISC_IRQ_LOCAL          AR531X_MISC_IRQ_BASE+8
-#define AR531X_MISC_IRQ_COUNT          9
-
-/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-#define AR531X_GPIO_IRQ_NONE            AR531X_MISC_IRQ_BASE+0
-#define AR531X_GPIO_IRQ(n)              AR531X_MISC_IRQ_BASE+(n)+1
-#define AR531X_GPIO_IRQ_COUNT           22
-
-#define sysRegRead(phys)       \
-       (*(volatile u32 *)KSEG1ADDR(phys))
-
-#define sysRegWrite(phys, val) \
-       ((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
-
-/*
- * This is board-specific data that is stored in a "fixed" location in flash.
- * It is shared across operating systems, so it should not be changed lightly.
- * The main reason we need it is in order to extract the ethernet MAC
- * address(es).
- */
-struct ar531x_boarddata {
-    u32 magic;                       /* board data is valid */
-#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
-    u16 cksum;                       /* checksum (starting with BD_REV 2) */
-    u16 rev;                         /* revision of this struct */
-#define BD_REV  4
-    char   boardName[64];            /* Name of board */
-    u16 major;                       /* Board major number */
-    u16 minor;                       /* Board minor number */
-    u32 config;                      /* Board configuration */
-#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
-#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
-#define BD_UART1        0x00000004   /* UART1 is stuffed */
-#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
-#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
-#define BD_SYSLED       0x00000020   /* System LED stuffed */
-#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
-#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
-#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
-#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
-#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
-#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
-#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
-#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
-#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
-#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
-#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
-#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
-    u16 resetConfigGpio;             /* Reset factory GPIO pin */
-    u16 sysLedGpio;                  /* System LED GPIO pin */
-
-    u32 cpuFreq;                     /* CPU core frequency in Hz */
-    u32 sysFreq;                     /* System frequency in Hz */
-    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
-
-    u8  wlan0Mac[6];
-    u8  enet0Mac[6];
-    u8  enet1Mac[6];
-
-    u16 pciId;                       /* Pseudo PCIID for common code */
-    u16 memCap;                      /* cap bank1 in MB */
-
-    /* version 3 */
-    u8  wlan1Mac[6];                 /* (ar5212) */
-};
-
-
-extern char *board_config;
-extern char *radio_config;
-extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
-extern int ar531x_find_config(char *flash_limit);
-
-extern void ar5312_misc_intr_init(int irq_base);
-extern void ar5312_irq_dispatch(void);
-extern void ar5312_plat_setup(void);
-
-extern void ar5315_misc_intr_init(int irq_base);
-extern asmlinkage void ar5315_irq_dispatch(void);
-extern void ar5315_plat_setup(void);
-
-#endif