[tools] cleanup imagetag
[openwrt.git] / target / linux / brcm47xx / patches-2.6.28 / 810-ssb-add-pmu-support.patch
index ea4bfe6..7ab70aa 100644 (file)
@@ -1,7 +1,13 @@
-Index: linux-2.6.28.2/drivers/ssb/Makefile
-===================================================================
---- linux-2.6.28.2.orig/drivers/ssb/Makefile   2009-02-01 13:09:04.000000000 +0100
-+++ linux-2.6.28.2/drivers/ssb/Makefile        2009-02-01 13:09:31.000000000 +0100
+Sent to mainline on 2009 Feb 03.
+
+For further modifications, please use separate patch files. This simpifies
+keeping track of what is upstream and what is not. Thanks.
+
+--mb
+
+
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
 @@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST)           += pcmcia.
  
  # built-in drivers
@@ -10,11 +16,9 @@ Index: linux-2.6.28.2/drivers/ssb/Makefile
  ssb-$(CONFIG_SSB_DRIVER_MIPS)         += driver_mipscore.o
  ssb-$(CONFIG_SSB_DRIVER_EXTIF)                += driver_extif.o
  ssb-$(CONFIG_SSB_DRIVER_PCICORE)      += driver_pcicore.o
-Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
-===================================================================
---- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-02 20:59:48.000000000 +0100
-@@ -0,0 +1,481 @@
+--- /dev/null
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -0,0 +1,508 @@
 +/*
 + * Sonics Silicon Backplane
 + * Broadcom ChipCommon Power Management Unit driver
@@ -254,17 +258,15 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
 +      ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
 +                 (crystalfreq / 1000), (crystalfreq % 1000));
 +
-+WARN_ON(1); //TODO not fully implemented, yet.
-+return;
 +      /* First turn the PLL off. */
 +      switch (bus->chip_id) {
 +      case 0x4325:
 +              chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
 +                            ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+                              (1 << SSB_PMURES_4325_HT_AVAIL)));
++                              (1 << SSB_PMURES_4325_HT_AVAIL)));
 +              chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
 +                            ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+                              (1 << SSB_PMURES_4325_HT_AVAIL)));
++                              (1 << SSB_PMURES_4325_HT_AVAIL)));
 +              /* Adjust the BBPLL to 2 on all channels later. */
 +              buffer_strength = 0x222222;
 +              break;
@@ -283,10 +285,39 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
 +
 +      /* Set p1div and p2div. */
 +      pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
-+      //TODO
++      pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
++      pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
++      pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
 +      ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
 +
-+      //TODO
++      /* Set ndiv int and ndiv mode */
++      pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
++      pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
++      pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
++      pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
++      ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
++
++      /* Set ndiv frac */
++      pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
++      pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
++      pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
++      ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
++
++      /* Change the drive strength, if required. */
++      if (buffer_strength) {
++              pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
++              pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
++              pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
++              ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
++      }
++
++      /* Tune the crystalfreq and the divisor. */
++      pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
++      pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
++      pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
++                      & SSB_CHIPCO_PMU_CTL_ILP_DIV;
++      pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
++      chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
 +}
 +
 +static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
@@ -496,10 +527,8 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
 +      ssb_pmu_pll_init(cc);
 +      ssb_pmu_resources_init(cc);
 +}
-Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.28.2.orig/drivers/ssb/driver_chipcommon.c        2009-02-01 13:07:03.000000000 +0100
-+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon.c     2009-02-01 13:47:17.000000000 +0100
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
 @@ -26,19 +26,6 @@ enum ssb_clksrc {
  };
  
@@ -528,10 +557,8 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c
        chipco_powercontrol_init(cc);
        ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
        calc_fast_powerup_delay(cc);
-Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.28.2.orig/include/linux/ssb/ssb_driver_chipcommon.h      2009-02-01 13:22:59.000000000 +0100
-+++ linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h   2009-02-02 21:00:08.000000000 +0100
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
 @@ -181,6 +181,16 @@
  #define SSB_CHIPCO_PROG_WAITCNT               0x0124
  #define SSB_CHIPCO_FLASH_CFG          0x0128
@@ -549,7 +576,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
  #define SSB_CHIPCO_UART0_DATA         0x0300
  #define SSB_CHIPCO_UART0_IMR          0x0304
  #define SSB_CHIPCO_UART0_FCR          0x0308
-@@ -197,6 +207,172 @@
+@@ -197,6 +207,196 @@
  #define SSB_CHIPCO_UART1_LSR          0x0414
  #define SSB_CHIPCO_UART1_MSR          0x0418
  #define SSB_CHIPCO_UART1_SCRATCH      0x041C
@@ -613,11 +640,35 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
 +
 +/* PMU rev 1 PLL registers */
 +#define SSB_PMU1_PLLCTL0                      0
++#define  SSB_PMU1_PLLCTL0_P1DIV                       0x00F00000 /* P1 div */
++#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT         20
++#define  SSB_PMU1_PLLCTL0_P2DIV                       0x0F000000 /* P2 div */
++#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT         24
 +#define SSB_PMU1_PLLCTL1                      1
++#define  SSB_PMU1_PLLCTL1_M1DIV                       0x000000FF /* M1 div */
++#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT         0
++#define  SSB_PMU1_PLLCTL1_M2DIV                       0x0000FF00 /* M2 div */
++#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT         8
++#define  SSB_PMU1_PLLCTL1_M3DIV                       0x00FF0000 /* M3 div */
++#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT         16
++#define  SSB_PMU1_PLLCTL1_M4DIV                       0xFF000000 /* M4 div */
++#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT         24
 +#define SSB_PMU1_PLLCTL2                      2
++#define  SSB_PMU1_PLLCTL2_M5DIV                       0x000000FF /* M5 div */
++#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT         0
++#define  SSB_PMU1_PLLCTL2_M6DIV                       0x0000FF00 /* M6 div */
++#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT         8
++#define  SSB_PMU1_PLLCTL2_NDIVMODE            0x000E0000 /* NDIV mode */
++#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT      17
++#define  SSB_PMU1_PLLCTL2_NDIVINT             0x1FF00000 /* NDIV int */
++#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT               20
 +#define SSB_PMU1_PLLCTL3                      3
++#define  SSB_PMU1_PLLCTL3_NDIVFRAC            0x00FFFFFF /* NDIV frac */
++#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT      0
 +#define SSB_PMU1_PLLCTL4                      4
 +#define SSB_PMU1_PLLCTL5                      5
++#define  SSB_PMU1_PLLCTL5_CLKDRV              0xFFFFFF00 /* clk drv */
++#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT                8
 +
 +/* BCM4312 PLL resource numbers. */
 +#define SSB_PMURES_4312_SWITCHER_BURST                0
@@ -722,7 +773,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
  
  
  
-@@ -353,11 +529,20 @@
+@@ -353,11 +553,20 @@
  struct ssb_device;
  struct ssb_serial_port;
  
@@ -743,7 +794,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
  };
  
  static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -365,6 +550,17 @@ static inline bool ssb_chipco_available(
+@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
        return (cc->dev != NULL);
  }
  
@@ -761,7 +812,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h
  extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
  
  extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
-@@ -406,4 +602,8 @@ extern int ssb_chipco_serial_init(struct
+@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct
                                  struct ssb_serial_port *ports);
  #endif /* CONFIG_SSB_SERIAL */
  
This page took 0.025761 seconds and 4 git commands to generate.