#
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2006-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
CONFIG_BT_HCIUSB \
CONFIG_BT_HCIUART \
CONFIG_BT_HCIUART_H4 \
- CONFIG_BT_HIDP
+ CONFIG_BT_HIDP \
+ CONFIG_HID_SUPPORT=y
$(call AddDepends/crc16)
$(call AddDepends/hid)
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
- $(LINUX_DIR)/net/bluetooth/l2cap.ko \
- $(LINUX_DIR)/net/bluetooth/sco.ko \
$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko
- AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.39)),1)
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
+ else
+ FILES+= \
+ $(LINUX_DIR)/net/bluetooth/l2cap.ko \
+ $(LINUX_DIR)/net/bluetooth/sco.ko
+ AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hidp hci_uart btusb)
+ endif
endef
define KernelPackage/bluetooth/description
$(eval $(call KernelPackage,bluetooth))
-define KernelPackage/crc-ccitt
+define KernelPackage/bluetooth-hci-h4p
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC-CCITT support
- KCONFIG:=CONFIG_CRC_CCITT
- FILES:=$(LINUX_DIR)/lib/crc-ccitt.ko
- AUTOLOAD:=$(call AutoLoad,20,crc-ccitt)
+ TITLE:=HCI driver with H4 Nokia extensions
+ DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
+ KCONFIG:=CONFIG_BT_HCIH4P
+ FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
+ AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
endef
-define KernelPackage/crc-ccitt/description
- Kernel module for CRC-CCITT support
+define KernelPackage/bluetooth-hci-h4p/description
+ HCI driver with H4 Nokia extensions
endef
-$(eval $(call KernelPackage,crc-ccitt))
+$(eval $(call KernelPackage,bluetooth-hci-h4p))
-define KernelPackage/crc-itu-t
+define KernelPackage/cpu-msr
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC ITU-T V.41 support
- KCONFIG:=CONFIG_CRC_ITU_T
- FILES:=$(LINUX_DIR)/lib/crc-itu-t.ko
- AUTOLOAD:=$(call AutoLoad,20,crc-itu-t)
+ TITLE:=x86 CPU MSR support
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_X86_MSR
+ FILES:=$(LINUX_DIR)/arch/x86/kernel/msr.ko
+ AUTOLOAD:=$(call AutoLoad,20,msr)
endef
-define KernelPackage/crc-itu-t/description
- Kernel module for CRC ITU-T V.41 support
+define KernelPackage/cpu-msr/description
+ Kernel module for Model Specific Registers support in x86 CPUs
endef
-$(eval $(call KernelPackage,crc-itu-t))
+$(eval $(call KernelPackage,cpu-msr))
-define KernelPackage/crc7
+define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC7 support
- KCONFIG:=CONFIG_CRC7
- FILES:=$(LINUX_DIR)/lib/crc7.ko
- AUTOLOAD:=$(call AutoLoad,20,crc7)
+ TITLE:=EEPROM 93CX6 support
+ KCONFIG:=CONFIG_EEPROM_93CX6
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
+ AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
-define KernelPackage/crc7/description
- Kernel module for CRC7 support
+define KernelPackage/eeprom-93cx6/description
+ Kernel module for EEPROM 93CX6 support
endef
-$(eval $(call KernelPackage,crc7))
+$(eval $(call KernelPackage,eeprom-93cx6))
-define KernelPackage/crc16
+define KernelPackage/eeprom-at24
SUBMENU:=$(OTHER_MENU)
- TITLE:=CRC16 support
- KCONFIG:=CONFIG_CRC16
- FILES:=$(LINUX_DIR)/lib/crc16.ko
- AUTOLOAD:=$(call AutoLoad,20,crc16,1)
- $(call SetDepends/crc16)
+ TITLE:=EEPROM AT24 support
+ KCONFIG:=CONFIG_EEPROM_AT24
+ DEPENDS:=+kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
+ AUTOLOAD:=$(call AutoLoad,60,at24)
endef
-define KernelPackage/crc16/description
- Kernel module for CRC16 support
+define KernelPackage/eeprom-at24/description
+ Kernel module for most I2C EEPROMs
endef
-$(eval $(call KernelPackage,crc16))
+$(eval $(call KernelPackage,eeprom-at24))
-define KernelPackage/eeprom-93cx6
+define KernelPackage/eeprom-at25
SUBMENU:=$(OTHER_MENU)
- TITLE:=EEPROM 93CX6 support
- KCONFIG:=CONFIG_EEPROM_93CX6
- FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
- AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
+ TITLE:=EEPROM AT25 support
+ KCONFIG:=CONFIG_EEPROM_AT25
+ FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
+ AUTOLOAD:=$(call AutoLoad,61,at25)
endef
-define KernelPackage/eeprom-93cx6/description
- Kernel module for EEPROM 93CX6 support
+define KernelPackage/eeprom-at25/description
+ Kernel module for most SPI EEPROMs
endef
-$(eval $(call KernelPackage,eeprom-93cx6))
+$(eval $(call KernelPackage,eeprom-at25))
define KernelPackage/gpio-cs5535
SUBMENU:=$(OTHER_MENU)
TITLE:=AMD CS5535/CS5536 GPIO driver
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 @LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_35||LINUX_2_6_36||LINUX_2_6_37
KCONFIG:=CONFIG_CS5535_GPIO
FILES:=$(LINUX_DIR)/drivers/char/cs5535_gpio.ko
AUTOLOAD:=$(call AutoLoad,50,cs5535_gpio)
$(eval $(call KernelPackage,gpio-cs5535))
+define KernelPackage/gpio-cs5535-new
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=AMD CS5535/CS5536 GPIO driver with improved sysfs support
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32)
+ KCONFIG:=CONFIG_GPIO_CS5535
+ FILES:=$(LINUX_DIR)/drivers/gpio/cs5535-gpio.ko
+ AUTOLOAD:=$(call AutoLoad,50,cs5535-gpio)
+endef
+
+define KernelPackage/gpio-cs5535-new/description
+ This package contains the new AMD CS5535/CS5536 GPIO driver
+endef
+
+$(eval $(call KernelPackage,gpio-cs5535-new))
+
+
define KernelPackage/gpio-dev
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic GPIO char device support
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO key support
DEPENDS:= @GPIO_SUPPORT
- KCONFIG:=CONFIG_KEYBOARD_GPIO
+ KCONFIG:= \
+ CONFIG_KEYBOARD_GPIO \
+ CONFIG_INPUT_KEYBOARD=y
FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys.ko
AUTOLOAD:=$(call AutoLoad,60,gpio_keys)
$(call AddDepends/input)
$(eval $(call KernelPackage,input-gpio-keys))
+define KernelPackage/input-gpio-keys-polled
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Polled GPIO key support
+ DEPENDS:=@GPIO_SUPPORT @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_34||LINUX_2_6_35||LINUX_2_6_36) +kmod-input-polldev
+ KCONFIG:= \
+ CONFIG_KEYBOARD_GPIO_POLLED \
+ CONFIG_INPUT_KEYBOARD=y
+ FILES:=$(LINUX_DIR)/drivers/input/keyboard/gpio_keys_polled.ko
+ AUTOLOAD:=$(call AutoLoad,62,gpio_keys_polled)
+ $(call AddDepends/input)
+endef
+
+define KernelPackage/input-gpio-keys-polled/description
+ Kernel module for support polled GPIO keys input device
+endef
+
+$(eval $(call KernelPackage,input-gpio-keys-polled))
+
+
define KernelPackage/input-gpio-encoder
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO rotay encoder
$(eval $(call KernelPackage,input-polldev))
-define KernelPackage/leds-alix
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines ALIX LED support
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_LEDS_ALIX2
- FILES:=$(LINUX_DIR)/drivers/leds/leds-alix2.ko
- AUTOLOAD:=$(call AutoLoad,50,leds-alix2)
-endef
-
-define KernelPackage/leds-alix/description
- Kernel module for PCengines ALIX LEDs
-endef
-
-$(eval $(call KernelPackage,leds-alix))
-
-
-define KernelPackage/leds-gpio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=GPIO LED support
- DEPENDS:= @GPIO_SUPPORT
- KCONFIG:=CONFIG_LEDS_GPIO
- FILES:=$(LINUX_DIR)/drivers/leds/leds-gpio.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-gpio)
-endef
-
-define KernelPackage/leds-gpio/description
- Kernel module for LEDs on GPIO lines
-endef
-
-$(eval $(call KernelPackage,leds-gpio))
-
-
-define KernelPackage/leds-net48xx
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Soekris Net48xx LED support
- DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
- KCONFIG:=CONFIG_LEDS_NET48XX
- FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.ko
- AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
-endef
-
-define KernelPackage/leds-net48xx/description
- Kernel module for Soekris Net48xx LEDs
-endef
-
-$(eval $(call KernelPackage,leds-net48xx))
-
-
-define KernelPackage/leds-rb750
- SUBMENU:=$(OTHER_MENU)
- TITLE:=RouterBOARD 750 LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_RB750
- FILES:=$(LINUX_DIR)/drivers/leds/leds-rb750.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-rb750)
-endef
-
-define KernelPackage/leds-rb750/description
- Kernel module for the LEDs on the MikroTik RouterBOARD 750.
-endef
-
-$(eval $(call KernelPackage,leds-rb750))
-
-
-define KernelPackage/leds-wndr3700-usb
- SUBMENU:=$(OTHER_MENU)
- TITLE:=WNDR3700 USB LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_WNDR3700_USB
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
-endef
-
-define KernelPackage/leds-wndr3700-usb/description
- Kernel module for the USB LED on the NETGWR WNDR3700 board.
-endef
-
-$(eval $(call KernelPackage,leds-wndr3700-usb))
-
-
-define KernelPackage/leds-wrap
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PCengines WRAP LED support
- DEPENDS:=@TARGET_x86 +kmod-gpio-scx200
- KCONFIG:=CONFIG_LEDS_WRAP
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wrap.ko
- AUTOLOAD:=$(call AutoLoad,50,leds-wrap)
-endef
-
-define KernelPackage/leds-wrap/description
- Kernel module for PCengines WRAP LEDs
-endef
-
-$(eval $(call KernelPackage,leds-wrap))
-
-
-define KernelPackage/ledtrig-morse
- SUBMENU:=$(OTHER_MENU)
- TITLE:=LED Morse Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_MORSE
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-morse.ko
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-morse)
-endef
-
-define KernelPackage/ledtrig-morse/description
- Kernel module to show morse coded messages on LEDs.
-endef
-
-$(eval $(call KernelPackage,ledtrig-morse))
-
-
-define KernelPackage/ledtrig-netdev
- SUBMENU:=$(OTHER_MENU)
- TITLE:=LED NETDEV Trigger
- KCONFIG:=CONFIG_LEDS_TRIGGER_NETDEV
- FILES:=$(LINUX_DIR)/drivers/leds/ledtrig-netdev.ko
- AUTOLOAD:=$(call AutoLoad,50,ledtrig-netdev)
-endef
-
-define KernelPackage/ledtrig-netdev/description
- Kernel module to drive LEDs based on network activity.
-endef
-
-$(eval $(call KernelPackage,ledtrig-netdev))
-
-
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
$(eval $(call KernelPackage,mmc-atmelmci,1))
+define KernelPackage/oprofile
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=OProfile profiling support
+ KCONFIG:=CONFIG_OPROFILE
+ FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
+ DEPENDS:=@KERNEL_PROFILING
+endef
+
+define KernelPackage/oprofile/description
+ Kernel module for support for oprofile system profiling.
+endef
+
+$(eval $(call KernelPackage,oprofile))
+
+
define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
TITLE:=RF switch subsystem support
$(eval $(call KernelPackage,ssb))
-define KernelPackage/textsearch
-SUBMENU:=$(OTHER_MENU)
- TITLE:=Textsearch support is selected if needed
- KCONFIG:= \
- CONFIG_TEXTSEARCH=y \
- CONFIG_TEXTSEARCH_KMP \
- CONFIG_TEXTSEARCH_BM \
- CONFIG_TEXTSEARCH_FSM
- FILES:= \
- $(LINUX_DIR)/lib/ts_kmp.ko \
- $(LINUX_DIR)/lib/ts_bm.ko \
- $(LINUX_DIR)/lib/ts_fsm.ko
- AUTOLOAD:=$(call AutoLoad,20,ts_kmp ts_bm ts_fsm)
+define KernelPackage/bcma
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BCMA support
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ KCONFIG:=\
+ CONFIG_BCMA \
+ CONFIG_BCMA_POSSIBLE=y \
+ CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
+ CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
+ CONFIG_BCMA_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
+ AUTOLOAD:=$(call AutoLoad,29,bcma)
+endef
+
+define KernelPackage/bcma/description
+ Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
endef
-$(eval $(call KernelPackage,textsearch))
+$(eval $(call KernelPackage,bcma))
define KernelPackage/wdt-geode
SUBMENU:=$(OTHER_MENU)
TITLE:=Geode/LX Watchdog timer
- DEPENDS:=@TARGET_x86
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
KCONFIG:=CONFIG_GEODE_WDT
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/geodewdt.ko
AUTOLOAD:=$(call AutoLoad,50,geodewdt)
$(eval $(call KernelPackage,wdt-geode))
+define KernelPackage/cs5535-clockevt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CS5535/CS5536 high-res timer (MFGPT) events
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfgpt
+ KCONFIG:=CONFIG_CS5535_CLOCK_EVENT_SRC
+ FILES:=$(LINUX_DIR)/drivers/clocksource/cs5535-clockevt.ko
+ AUTOLOAD:=$(call AutoLoad,50,cs5535-clockevt)
+endef
+
+define KernelPackage/cs5535-clockevt/description
+ Kernel module for CS5535/6 high-res clock event source
+endef
+
+$(eval $(call KernelPackage,cs5535-clockevt))
+
+
+define KernelPackage/cs5535-mfgpt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CS5535/6 Multifunction General Purpose Timer
+ DEPENDS:=@TARGET_x86 +kmod-cs5535-mfd
+ KCONFIG:=CONFIG_CS5535_MFGPT
+ FILES:=$(LINUX_DIR)/drivers/misc/cs5535-mfgpt.ko
+ AUTOLOAD:=$(call AutoLoad,45,cs5535-mfgpt)
+endef
+
+define KernelPackage/cs5535-mfgpt/description
+ Kernel module for CS5535/6 multifunction general purpose timer.
+endef
+
+$(eval $(call KernelPackage,cs5535-mfgpt))
+
+
+define KernelPackage/cs5535-mfd
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=CS5535/6 Multifunction General Purpose Driver
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_MFD_CS5535
+ FILES:= \
+ $(LINUX_DIR)/drivers/mfd/mfd-core.ko \
+ $(LINUX_DIR)/drivers/mfd/cs5535-mfd.ko
+ AUTOLOAD:=$(call AutoLoad,44,mfd-core cs5535-mfd)
+endef
+
+define KernelPackage/cs5535-mfd/description
+ Core driver for CS5535/CS5536 MFD functions.
+endef
+
+$(eval $(call KernelPackage,cs5535-mfd))
+
+
+define KernelPackage/wdt-omap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=OMAP Watchdog timer
+ DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
+ KCONFIG:=CONFIG_OMAP_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
+endef
+
+define KernelPackage/wdt-omap/description
+ Kernel module for TI omap watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-omap))
+
+
+define KernelPackage/wdt-orion
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Orion Watchdog timer
+ DEPENDS:=@TARGET_orion
+ KCONFIG:=CONFIG_ORION_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
+endef
+
+define KernelPackage/wdt-orion/description
+ Kernel module for Marvell orion watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-orion))
+
+
define KernelPackage/wdt-sc520
SUBMENU:=$(OTHER_MENU)
TITLE:=Natsemi SC520 Watchdog support
$(eval $(call KernelPackage,wdt-scx200))
-
define KernelPackage/pwm
SUBMENU:=$(OTHER_MENU)
TITLE:=PWM generic API
endef
$(eval $(call KernelPackage,pwm-gpio))
+
+define KernelPackage/rtc-core
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@(!LINUX_3_0||BROKEN)
+ TITLE:=Real Time Clock class support
+ KCONFIG:=CONFIG_RTC_CLASS
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-core.ko
+ AUTOLOAD:=$(call AutoLoad,29,rtc-core)
+endef
+
+define KernelPackage/rtc-core/description
+ Generic RTC class support.
+endef
+
+$(eval $(call KernelPackage,rtc-core))
+
+define KernelPackage/rtc-pcf8563
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF8563/Epson RTC8564 RTC support
+ DEPENDS:=+kmod-rtc-core
+ KCONFIG:=CONFIG_RTC_DRV_PCF8563
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+endef
+
+define KernelPackage/rtc-pcf8563/description
+ Kernel module for Philips PCF8563 RTC chip.
+ The Epson RTC8564 should work as well.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf8563))
+
+
+define KernelPackage/n810bm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Nokia N810 battery management driver
+ DEPENDS:=@TARGET_omap24xx
+ KCONFIG:=CONFIG_N810BM
+ FILES:=$(LINUX_DIR)/drivers/cbus/n810bm.ko
+ AUTOLOAD:=$(call AutoLoad,01,n810bm)
+endef
+
+define KernelPackage/n810bm/description
+ Nokia N810 battery management driver.
+ Controls battery power management and battery charging.
+endef
+
+$(eval $(call KernelPackage,n810bm))
projects / openwrt.git / blobdiff