[toolchain] eglibc: add support for 2.14
[openwrt.git] / target / linux / generic / patches-2.6.32 / 975-ssb_update.patch
index 0cb8483..a2cb447 100644 (file)
@@ -1,6 +1,44 @@
 --- a/drivers/ssb/driver_chipcommon.c
 +++ b/drivers/ssb/driver_chipcommon.c
-@@ -373,6 +373,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
+       }
+ }
++/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
++static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
++{
++      struct ssb_bus *bus = cc->dev->bus;
++
++      switch (bus->chip_id) {
++      case 0x4312:
++      case 0x4322:
++      case 0x4328:
++              return 7000;
++      case 0x4325:
++              /* TODO: */
++      default:
++              return 15000;
++      }
++}
++
++/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
+ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
+ {
+       struct ssb_bus *bus = cc->dev->bus;
+@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
+       if (bus->bustype != SSB_BUSTYPE_PCI)
+               return;
++
++      if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
++              cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
++              return;
++      }
++
+       if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
+               return;
+@@ -373,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
  {
        return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
  }
                /* We keep the default settings:
                 * min_msk = 0xCBB
                 * max_msk = 0x7FFFF
+@@ -495,9 +502,9 @@ static void ssb_pmu_resources_init(struc
+               chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+ }
++/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
+ void ssb_pmu_init(struct ssb_chipcommon *cc)
+ {
+-      struct ssb_bus *bus = cc->dev->bus;
+       u32 pmucap;
+       if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+@@ -509,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon
+       ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+                   cc->pmu.rev, pmucap);
+-      if (cc->pmu.rev >= 1) {
+-              if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+-                      chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+-                                    ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+-              } else {
+-                      chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+-                                   SSB_CHIPCO_PMU_CTL_NOILPONW);
+-              }
+-      }
++      if (cc->pmu.rev == 1)
++              chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
++                            ~SSB_CHIPCO_PMU_CTL_NOILPONW);
++      else
++              chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
++                           SSB_CHIPCO_PMU_CTL_NOILPONW);
+       ssb_pmu_pll_init(cc);
+       ssb_pmu_resources_init(cc);
+ }
 --- a/drivers/ssb/driver_gige.c
 +++ b/drivers/ssb/driver_gige.c
 @@ -12,6 +12,7 @@
 -              if (!dev->dev ||
 -                  !dev->dev->driver ||
 -                  !device_is_registered(dev->dev))
+-                      continue;
+-              drv = drv_to_ssb_drv(dev->dev->driver);
+-              if (!drv)
 +              sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
 +              if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
 +                      ssb_device_put(sdev);
                        continue;
--              drv = drv_to_ssb_drv(dev->dev->driver);
--              if (!drv)
--                      continue;
 -              err = drv->suspend(dev, state);
 -              if (err) {
 -                      ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
  }
  #endif /* CONFIG_SSB_SPROM */
  
-@@ -490,8 +495,7 @@ static int ssb_devices_register(struct s
+@@ -380,6 +385,35 @@ static int ssb_device_uevent(struct devi
+                            ssb_dev->id.revision);
+ }
++#define ssb_config_attr(attrib, field, format_string) \
++static ssize_t \
++attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
++{ \
++      return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
++}
++
++ssb_config_attr(core_num, core_index, "%u\n")
++ssb_config_attr(coreid, id.coreid, "0x%04x\n")
++ssb_config_attr(vendor, id.vendor, "0x%04x\n")
++ssb_config_attr(revision, id.revision, "%u\n")
++ssb_config_attr(irq, irq, "%u\n")
++static ssize_t
++name_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++      return sprintf(buf, "%s\n",
++                     ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
++}
++
++static struct device_attribute ssb_device_attrs[] = {
++      __ATTR_RO(name),
++      __ATTR_RO(core_num),
++      __ATTR_RO(coreid),
++      __ATTR_RO(vendor),
++      __ATTR_RO(revision),
++      __ATTR_RO(irq),
++      __ATTR_NULL,
++};
++
+ static struct bus_type ssb_bustype = {
+       .name           = "ssb",
+       .match          = ssb_bus_match,
+@@ -389,6 +423,7 @@ static struct bus_type ssb_bustype = {
+       .suspend        = ssb_device_suspend,
+       .resume         = ssb_device_resume,
+       .uevent         = ssb_device_uevent,
++      .dev_attrs      = ssb_device_attrs,
+ };
+ static void ssb_buses_lock(void)
+@@ -481,6 +516,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+                       sdev->irq = bus->host_pci->irq;
+                       dev->parent = &bus->host_pci->dev;
++                      sdev->dma_dev = dev->parent;
+ #endif
+                       break;
+               case SSB_BUSTYPE_PCMCIA:
+@@ -490,13 +526,13 @@ static int ssb_devices_register(struct s
  #endif
                        break;
                case SSB_BUSTYPE_SDIO:
                        dev->parent = &bus->host_sdio->dev;
  #endif
                        break;
-@@ -830,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+               case SSB_BUSTYPE_SSB:
+                       dev->dma_mask = &dev->coherent_dma_mask;
++                      sdev->dma_dev = dev;
+                       break;
+               }
+@@ -830,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b
        if (!err) {
                ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
                           "PCI device %s\n", dev_name(&host_pci->dev));
        }
  
        return err;
+@@ -1155,10 +1194,10 @@ void ssb_device_enable(struct ssb_device
+ }
+ EXPORT_SYMBOL(ssb_device_enable);
+-/* Wait for a bit in a register to get set or unset.
++/* Wait for bitmask in a register to get set or cleared.
+  * timeout is in units of ten-microseconds */
+-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
+-                      int timeout, int set)
++static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
++                       int timeout, int set)
+ {
+       int i;
+       u32 val;
+@@ -1166,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic
+       for (i = 0; i < timeout; i++) {
+               val = ssb_read32(dev, reg);
+               if (set) {
+-                      if (val & bitmask)
++                      if ((val & bitmask) == bitmask)
+                               return 0;
+               } else {
+                       if (!(val & bitmask))
+@@ -1183,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic
+ void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
+ {
+-      u32 reject;
++      u32 reject, val;
+       if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
+               return;
+       reject = ssb_tmslow_reject_bitmask(dev);
+-      ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+-      ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
+-      ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+-      ssb_write32(dev, SSB_TMSLOW,
+-                  SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+-                  reject | SSB_TMSLOW_RESET |
+-                  core_specific_flags);
+-      ssb_flush_tmslow(dev);
++
++      if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
++              ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
++              ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
++              ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
++
++              if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
++                      val = ssb_read32(dev, SSB_IMSTATE);
++                      val |= SSB_IMSTATE_REJECT;
++                      ssb_write32(dev, SSB_IMSTATE, val);
++                      ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
++                                    0);
++              }
++
++              ssb_write32(dev, SSB_TMSLOW,
++                      SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
++                      reject | SSB_TMSLOW_RESET |
++                      core_specific_flags);
++              ssb_flush_tmslow(dev);
++
++              if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
++                      val = ssb_read32(dev, SSB_IMSTATE);
++                      val &= ~SSB_IMSTATE_REJECT;
++                      ssb_write32(dev, SSB_IMSTATE, val);
++              }
++      }
+       ssb_write32(dev, SSB_TMSLOW,
+                   reject | SSB_TMSLOW_RESET |
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -17,6 +17,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
++#include <linux/slab.h>
+ #include <linux/pci.h>
+ #include <linux/delay.h>
+@@ -167,7 +168,7 @@ err_pci:
+ }
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16))
++#define SPOFF(offset) ((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+ #define SPEX16(_outvar, _offset, _mask, _shift)       \
+       out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+@@ -405,6 +406,46 @@ static void sprom_extract_r123(struct ss
+       out->antenna_gain.ghz5.a3 = gain;
+ }
++/* Revs 4 5 and 8 have partially shared layout */
++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
++{
++      SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
++           SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
++      SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
++           SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
++      SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
++           SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
++      SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
++           SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
++
++      SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
++           SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
++      SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
++           SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
++      SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
++           SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
++      SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
++           SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
++
++      SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
++           SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
++      SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
++           SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
++      SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
++           SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
++      SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
++           SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
++
++      SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
++           SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
++      SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
++           SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
++      SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
++           SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
++      SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
++           SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
++}
++
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+       int i;
+@@ -427,10 +468,14 @@ static void sprom_extract_r45(struct ssb
+               SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+               SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
+               SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
++              SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
++              SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
+       } else {
+               SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
+               SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
+               SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
++              SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
++              SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
+       }
+       SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
+            SSB_SPROM4_ANTAVAIL_A_SHIFT);
+@@ -470,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+       memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+              sizeof(out->antenna_gain.ghz5));
++      sprom_extract_r458(out, in);
++
+       /* TODO - get remaining rev 4 stuff needed */
+ }
+@@ -560,6 +607,8 @@ static void sprom_extract_r8(struct ssb_
+       memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+              sizeof(out->antenna_gain.ghz5));
++      sprom_extract_r458(out, in);
++
+       /* TODO - get remaining rev 8 stuff needed */
+ }
+@@ -572,37 +621,34 @@ static int sprom_extract(struct ssb_bus
+       ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
+       memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
+       memset(out->et1mac, 0xFF, 6);
++
+       if ((bus->chip_id & 0xFF00) == 0x4400) {
+               /* Workaround: The BCM44XX chip has a stupid revision
+                * number stored in the SPROM.
+                * Always extract r1. */
+               out->revision = 1;
++              ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++      }
++
++      switch (out->revision) {
++      case 1:
++      case 2:
++      case 3:
+               sprom_extract_r123(out, in);
+-      } else if (bus->chip_id == 0x4321) {
+-              /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
+-              out->revision = 4;
++              break;
++      case 4:
++      case 5:
+               sprom_extract_r45(out, in);
+-      } else {
+-              switch (out->revision) {
+-              case 1:
+-              case 2:
+-              case 3:
+-                      sprom_extract_r123(out, in);
+-                      break;
+-              case 4:
+-              case 5:
+-                      sprom_extract_r45(out, in);
+-                      break;
+-              case 8:
+-                      sprom_extract_r8(out, in);
+-                      break;
+-              default:
+-                      ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+-                                 "  revision %d detected. Will extract"
+-                                 " v1\n", out->revision);
+-                      out->revision = 1;
+-                      sprom_extract_r123(out, in);
+-              }
++              break;
++      case 8:
++              sprom_extract_r8(out, in);
++              break;
++      default:
++              ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
++                         " revision %d detected. Will extract"
++                         " v1\n", out->revision);
++              out->revision = 1;
++              sprom_extract_r123(out, in);
+       }
+       if (out->boardflags_lo == 0xFFFF)
+@@ -617,7 +663,7 @@ static int ssb_pci_sprom_get(struct ssb_
+                            struct ssb_sprom *sprom)
+ {
+       const struct ssb_sprom *fallback;
+-      int err = -ENOMEM;
++      int err;
+       u16 *buf;
+       if (!ssb_is_sprom_available(bus)) {
+@@ -644,7 +690,7 @@ static int ssb_pci_sprom_get(struct ssb_
+       buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+       if (!buf)
+-              goto out;
++              return -ENOMEM;
+       bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
+       sprom_do_read(bus, buf);
+       err = sprom_check_crc(buf, bus->sprom_size);
+@@ -654,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_
+               buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+                             GFP_KERNEL);
+               if (!buf)
+-                      goto out;
++                      return -ENOMEM;
+               bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
+               sprom_do_read(bus, buf);
+               err = sprom_check_crc(buf, bus->sprom_size);
+@@ -676,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_
+ out_free:
+       kfree(buf);
+-out:
+       return err;
+ }
 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
 @@ -12,6 +12,7 @@
  #include <linux/ssb/ssb.h>
  
  
+@@ -58,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_
+       struct ssb_bus *ssb;
+       int err = -ENOMEM;
+       const char *name;
++      u32 val;
+       ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
+       if (!ssb)
+@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
+               goto err_pci_disable;
+       pci_set_master(dev);
++      /* Disable the RETRY_TIMEOUT register (0x41) to keep
++       * PCI Tx retries from interfering with C3 CPU state */
++      pci_read_config_dword(dev, 0x40, &val);
++      if ((val & 0x0000ff00) != 0)
++              pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
++
+       err = ssb_bus_pcibus_register(ssb, dev);
+       if (err)
+               goto err_pci_release_regions;
 --- a/drivers/ssb/pcmcia.c
 +++ b/drivers/ssb/pcmcia.c
 @@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
 +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
 +                      tuple_t *tuple,
 +                      void *priv)
-+{
+ {
+-      tuple_t tuple;
+-      int res;
+-      unsigned char buf[32];
 +      struct ssb_sprom *sprom = priv;
 +
 +      if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
 +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
 +                                      tuple_t *tuple,
 +                                      void *priv)
- {
--      tuple_t tuple;
--      int res;
--      unsigned char buf[32];
++{
 +      struct ssb_init_invariants *iv = priv;
        struct ssb_sprom *sprom = &iv->sprom;
        struct ssb_boardinfo *bi = &iv->boardinfo;
 -              GOTO_ERROR_ON(res != 0, "VEN next tpl data");
 -      }
 +      res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
-+                              ssb_pcmcia_do_get_invariants, sprom);
++                              ssb_pcmcia_do_get_invariants, iv);
 +      if ((res == 0) || (res == -ENOSPC))
 +              return 0;
  
                            "Core %d found: %s "
                            "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
                            i, ssb_core_name(dev->id.coreid),
+@@ -422,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
+                       bus->pcicore.dev = dev;
+ #endif /* CONFIG_SSB_DRIVER_PCICORE */
+                       break;
++              case SSB_DEV_ETHERNET:
++                      if (bus->bustype == SSB_BUSTYPE_PCI) {
++                              if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
++                                  (bus->host_pci->device & 0xFF00) == 0x4300) {
++                                      /* This is a dangling ethernet core on a
++                                       * wireless device. Ignore it. */
++                                      continue;
++                              }
++                      }
++                      break;
+               default:
+                       break;
+               }
 --- a/drivers/ssb/sprom.c
 +++ b/drivers/ssb/sprom.c
 @@ -14,6 +14,7 @@
  #endif /* LINUX_SSB_PRIVATE_H_ */
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
-@@ -269,7 +269,8 @@ struct ssb_bus {
+@@ -55,6 +55,10 @@ struct ssb_sprom {
+       u8 tri5gl;              /* 5.2GHz TX isolation */
+       u8 tri5g;               /* 5.3GHz TX isolation */
+       u8 tri5gh;              /* 5.8GHz TX isolation */
++      u8 txpid2g[4];          /* 2GHz TX power index */
++      u8 txpid5gl[4];         /* 4.9 - 5.1GHz TX power index */
++      u8 txpid5g[4];          /* 5.1 - 5.5GHz TX power index */
++      u8 txpid5gh[4];         /* 5.5 - ...GHz TX power index */
+       u8 rxpo2g;              /* 2GHz RX power offset */
+       u8 rxpo5g;              /* 5GHz RX power offset */
+       u8 rssisav2g;           /* 2GHz RSSI params */
+@@ -167,7 +171,7 @@ struct ssb_device {
+        * is an optimization. */
+       const struct ssb_bus_ops *ops;
+-      struct device *dev;
++      struct device *dev, *dma_dev;
+       struct ssb_bus *bus;
+       struct ssb_device_id id;
+@@ -269,7 +273,8 @@ struct ssb_bus {
  
        const struct ssb_bus_ops *ops;
  
        struct ssb_device *mapped_device;
        union {
                /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-@@ -281,14 +282,17 @@ struct ssb_bus {
+@@ -281,14 +286,17 @@ struct ssb_bus {
         * On PCMCIA-host busses this is used to protect the whole MMIO access. */
        spinlock_t bar_lock;
  
        unsigned int quirks;
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
-@@ -198,63 +198,63 @@
+@@ -85,6 +85,8 @@
+ #define  SSB_IMSTATE_AP_RSV   0x00000030 /* Reserved */
+ #define  SSB_IMSTATE_IBE      0x00020000 /* In Band Error */
+ #define  SSB_IMSTATE_TO               0x00040000 /* Timeout */
++#define  SSB_IMSTATE_BUSY     0x01800000 /* Busy (Backplane rev >= 2.3 only) */
++#define  SSB_IMSTATE_REJECT   0x02000000 /* Reject (Backplane rev >= 2.3 only) */
+ #define SSB_INTVEC            0x0F94     /* SB Interrupt Mask */
+ #define  SSB_INTVEC_PCI               0x00000001 /* Enable interrupts for PCI */
+ #define  SSB_INTVEC_ENET0     0x00000002 /* Enable interrupts for enet 0 */
+@@ -172,25 +174,25 @@
+ #define SSB_SPROMSIZE_BYTES_R4                (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+ #define SSB_SPROM_BASE1                       0x1000
+ #define SSB_SPROM_BASE31              0x0800
+-#define SSB_SPROM_REVISION            0x107E
++#define SSB_SPROM_REVISION            0x007E
+ #define  SSB_SPROM_REVISION_REV               0x00FF  /* SPROM Revision number */
+ #define  SSB_SPROM_REVISION_CRC               0xFF00  /* SPROM CRC8 value */
+ #define  SSB_SPROM_REVISION_CRC_SHIFT 8
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID                       0x1004  /* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID                       0x1006  /* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID                        0x1008  /* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC             0x1048  /* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC             0x104E  /* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC             0x1054  /* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY             0x105A  /* Ethernet PHY settings */
++#define SSB_SPROM1_SPID                       0x0004  /* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID                       0x0006  /* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID                        0x0008  /* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC             0x0048  /* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC             0x004E  /* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC             0x0054  /* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY             0x005A  /* Ethernet PHY settings */
+ #define  SSB_SPROM1_ETHPHY_ET0A               0x001F  /* MII Address for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1A               0x03E0  /* MII Address for enet1 */
+ #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
+ #define  SSB_SPROM1_ETHPHY_ET0M               (1<<14) /* MDIO for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1M               (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM1_BINF                       0x105C  /* Board info */
++#define SSB_SPROM1_BINF                       0x005C  /* Board info */
+ #define  SSB_SPROM1_BINF_BREV         0x00FF  /* Board Revision */
+ #define  SSB_SPROM1_BINF_CCODE                0x0F00  /* Country Code */
+ #define  SSB_SPROM1_BINF_CCODE_SHIFT  8
+@@ -198,63 +200,63 @@
  #define  SSB_SPROM1_BINF_ANTBG_SHIFT  12
  #define  SSB_SPROM1_BINF_ANTA         0xC000  /* Available A-PHY antennas */
  #define  SSB_SPROM1_BINF_ANTA_SHIFT   14
  #define  SSB_SPROM3_CCKPO_1M          0x000F  /* 1M Rate PO */
  #define  SSB_SPROM3_CCKPO_2M          0x00F0  /* 2M Rate PO */
  #define  SSB_SPROM3_CCKPO_2M_SHIFT    4
-@@ -265,100 +265,100 @@
+@@ -265,100 +267,144 @@
  #define  SSB_SPROM3_OFDMGPO           0x107A  /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
  
  /* SPROM Revision 4 */
 -#define SSB_SPROM4_ETHPHY             0x105A  /* Ethernet PHY settings ?? */
 +#define SSB_SPROM4_BFLLO              0x0044  /* Boardflags (low 16 bits) */
 +#define SSB_SPROM4_BFLHI              0x0046  /* Board Flags Hi */
++#define SSB_SPROM4_BFL2LO             0x0048  /* Board flags 2 (low 16 bits) */
++#define SSB_SPROM4_BFL2HI             0x004A  /* Board flags 2 Hi */
 +#define SSB_SPROM4_IL0MAC             0x004C  /* 6 byte MAC address for a/b/g/n */
 +#define SSB_SPROM4_CCODE              0x0052  /* Country Code (2 bytes) */
 +#define SSB_SPROM4_GPIOA              0x0056  /* Gen. Purpose IO # 0 and 1 */
  #define  SSB_SPROM4_AGAIN3_SHIFT      8
 -#define SSB_SPROM4_BFLHI              0x1046  /* Board Flags Hi */
 -#define SSB_SPROM4_MAXP_BG            0x1080  /* Max Power BG in path 1 */
++#define SSB_SPROM4_TXPID2G01          0x0062  /* TX Power Index 2GHz */
++#define  SSB_SPROM4_TXPID2G0          0x00FF
++#define  SSB_SPROM4_TXPID2G0_SHIFT    0
++#define  SSB_SPROM4_TXPID2G1          0xFF00
++#define  SSB_SPROM4_TXPID2G1_SHIFT    8
++#define SSB_SPROM4_TXPID2G23          0x0064  /* TX Power Index 2GHz */
++#define  SSB_SPROM4_TXPID2G2          0x00FF
++#define  SSB_SPROM4_TXPID2G2_SHIFT    0
++#define  SSB_SPROM4_TXPID2G3          0xFF00
++#define  SSB_SPROM4_TXPID2G3_SHIFT    8
++#define SSB_SPROM4_TXPID5G01          0x0066  /* TX Power Index 5GHz middle subband */
++#define  SSB_SPROM4_TXPID5G0          0x00FF
++#define  SSB_SPROM4_TXPID5G0_SHIFT    0
++#define  SSB_SPROM4_TXPID5G1          0xFF00
++#define  SSB_SPROM4_TXPID5G1_SHIFT    8
++#define SSB_SPROM4_TXPID5G23          0x0068  /* TX Power Index 5GHz middle subband */
++#define  SSB_SPROM4_TXPID5G2          0x00FF
++#define  SSB_SPROM4_TXPID5G2_SHIFT    0
++#define  SSB_SPROM4_TXPID5G3          0xFF00
++#define  SSB_SPROM4_TXPID5G3_SHIFT    8
++#define SSB_SPROM4_TXPID5GL01         0x006A  /* TX Power Index 5GHz low subband */
++#define  SSB_SPROM4_TXPID5GL0         0x00FF
++#define  SSB_SPROM4_TXPID5GL0_SHIFT   0
++#define  SSB_SPROM4_TXPID5GL1         0xFF00
++#define  SSB_SPROM4_TXPID5GL1_SHIFT   8
++#define SSB_SPROM4_TXPID5GL23         0x006C  /* TX Power Index 5GHz low subband */
++#define  SSB_SPROM4_TXPID5GL2         0x00FF
++#define  SSB_SPROM4_TXPID5GL2_SHIFT   0
++#define  SSB_SPROM4_TXPID5GL3         0xFF00
++#define  SSB_SPROM4_TXPID5GL3_SHIFT   8
++#define SSB_SPROM4_TXPID5GH01         0x006E  /* TX Power Index 5GHz high subband */
++#define  SSB_SPROM4_TXPID5GH0         0x00FF
++#define  SSB_SPROM4_TXPID5GH0_SHIFT   0
++#define  SSB_SPROM4_TXPID5GH1         0xFF00
++#define  SSB_SPROM4_TXPID5GH1_SHIFT   8
++#define SSB_SPROM4_TXPID5GH23         0x0070  /* TX Power Index 5GHz high subband */
++#define  SSB_SPROM4_TXPID5GH2         0x00FF
++#define  SSB_SPROM4_TXPID5GH2_SHIFT   0
++#define  SSB_SPROM4_TXPID5GH3         0xFF00
++#define  SSB_SPROM4_TXPID5GH3_SHIFT   8
 +#define SSB_SPROM4_MAXP_BG            0x0080  /* Max Power BG in path 1 */
  #define  SSB_SPROM4_MAXP_BG_MASK      0x00FF  /* Mask for Max Power BG */
  #define  SSB_SPROM4_ITSSI_BG          0xFF00  /* Mask for path 1 itssi_bg */
 +#define SSB_SPROM5_CCODE              0x0044  /* Country Code (2 bytes) */
 +#define SSB_SPROM5_BFLLO              0x004A  /* Boardflags (low 16 bits) */
 +#define SSB_SPROM5_BFLHI              0x004C  /* Board Flags Hi */
++#define SSB_SPROM5_BFL2LO             0x004E  /* Board flags 2 (low 16 bits) */
++#define SSB_SPROM5_BFL2HI             0x0050  /* Board flags 2 Hi */
 +#define SSB_SPROM5_IL0MAC             0x0052  /* 6 byte MAC address for a/b/g/n */
 +#define SSB_SPROM5_GPIOA              0x0076  /* Gen. Purpose IO # 0 and 1 */
  #define  SSB_SPROM5_GPIOA_P0          0x00FF  /* Pin 0 */
  #define  SSB_SPROM8_RSSISMF2G         0x000F
  #define  SSB_SPROM8_RSSISMC2G         0x00F0
  #define  SSB_SPROM8_RSSISMC2G_SHIFT   4
-@@ -366,7 +366,7 @@
+@@ -366,7 +412,7 @@
  #define  SSB_SPROM8_RSSISAV2G_SHIFT   8
  #define  SSB_SPROM8_BXA2G             0x1800
  #define  SSB_SPROM8_BXA2G_SHIFT               11
  #define  SSB_SPROM8_RSSISMF5G         0x000F
  #define  SSB_SPROM8_RSSISMC5G         0x00F0
  #define  SSB_SPROM8_RSSISMC5G_SHIFT   4
-@@ -374,47 +374,47 @@
+@@ -374,47 +420,47 @@
  #define  SSB_SPROM8_RSSISAV5G_SHIFT   8
  #define  SSB_SPROM8_BXA5G             0x1800
  #define  SSB_SPROM8_BXA5G_SHIFT               11
This page took 0.042772 seconds and 4 git commands to generate.