firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image

[openwrt.git] / package / broadcom-diag / src / diag.c

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 8e7ffa6..00a72e9 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -149,9 +149,9 @@ static void __init bcm4780_init(void) {
 
                /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
                printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
 
                /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
                printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");

-               ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
-               ssb_gpio_control(&ssb_bcm47xx, pin, 0);
-               ssb_gpio_out(&ssb_bcm47xx, pin, pin);
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);

 
                /* Wait 5s, so the HDD can spin up */
                set_current_state(TASK_INTERRUPTIBLE);
 
                /* Wait 5s, so the HDD can spin up */
                set_current_state(TASK_INTERRUPTIBLE);


@@ -161,14 +161,14 @@ static void __init bcm4780_init(void) {
 static void __init NetCenter_init(void) {
                /* unset pin 6 (+12V) */
                int pin = 1 << 6;
 static void __init NetCenter_init(void) {
                /* unset pin 6 (+12V) */
                int pin = 1 << 6;

-               ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
-               ssb_gpio_control(&ssb_bcm47xx, pin, 0);
-               ssb_gpio_out(&ssb_bcm47xx, pin, pin);
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);

                /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
                pin = 1 << 1;
                /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
                pin = 1 << 1;

-               ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
-               ssb_gpio_control(&ssb_bcm47xx, pin, 0);
-               ssb_gpio_out(&ssb_bcm47xx, pin, pin);
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);

                /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
                bcm4780_init();
 }
                /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
                bcm4780_init();
 }


@@ -177,9 +177,9 @@ static void __init bcm57xx_init(void) {
        int pin = 1 << 2;
 
        /* FIXME: switch comes up, but port mappings/vlans not right */
        int pin = 1 << 2;
 
        /* FIXME: switch comes up, but port mappings/vlans not right */

-       ssb_gpio_outen(&ssb_bcm47xx, pin, pin);
-       ssb_gpio_control(&ssb_bcm47xx, pin, 0);
-       ssb_gpio_out(&ssb_bcm47xx, pin, pin);
+       gpio_outen(pin, pin);
+       gpio_control(pin, 0);
+       gpio_out(pin, pin);

 }
 
 static struct platform_t __initdata platforms[] = {
 }
 
 static struct platform_t __initdata platforms[] = {


@@ -1166,18 +1166,18 @@ static void register_buttons(struct button_t *b)
 
        platform.button_mask &= ~gpiomask;
 
 
        platform.button_mask &= ~gpiomask;
 

-       ssb_gpio_outen(&ssb_bcm47xx, platform.button_mask, 0);
-       ssb_gpio_control(&ssb_bcm47xx, platform.button_mask, 0);
-       platform.button_polarity = ssb_gpio_in(&ssb_bcm47xx, ~0) & platform.button_mask;
-       ssb_gpio_polarity(&ssb_bcm47xx, platform.button_mask, platform.button_polarity);
-       ssb_gpio_intmask(&ssb_bcm47xx, platform.button_mask, platform.button_mask);
+       gpio_outen(platform.button_mask, 0);
+       gpio_control(platform.button_mask, 0);
+       platform.button_polarity = gpio_in() & platform.button_mask;
+       gpio_intpolarity(platform.button_mask, platform.button_polarity);
+       gpio_setintmask(platform.button_mask, platform.button_mask);

 
        gpio_set_irqenable(1, button_handler);
 }
 
 static void unregister_buttons(struct button_t *b)
 {
 
        gpio_set_irqenable(1, button_handler);
 }
 
 static void unregister_buttons(struct button_t *b)
 {

-       ssb_gpio_intmask(&ssb_bcm47xx, platform.button_mask, 0);
+       gpio_setintmask(platform.button_mask, 0);

 
        gpio_set_irqenable(0, button_handler);
 }
 
        gpio_set_irqenable(0, button_handler);
 }


@@ -1237,12 +1237,12 @@ static irqreturn_t button_handler(int irq, void *dev_id)
        struct button_t *b;
        u32 in, changed;
 
        struct button_t *b;
        u32 in, changed;
 

-       in = ssb_gpio_in(&ssb_bcm47xx, ~0) & platform.button_mask;
-       ssb_gpio_polarity(&ssb_bcm47xx, platform.button_mask, in);
+       in = gpio_in() & platform.button_mask;
+       gpio_intpolarity(platform.button_mask, in);

        changed = platform.button_polarity ^ in;
        platform.button_polarity = in;
 
        changed = platform.button_polarity ^ in;
        platform.button_polarity = in;
 

-       changed &= ~ssb_gpio_outen(&ssb_bcm47xx, 0, 0);
+       changed &= ~gpio_outen(0, 0);

 
        for (b = platform.buttons; b->name; b++) {
                struct event_t *event;
 
        for (b = platform.buttons; b->name; b++) {
                struct event_t *event;


@@ -1298,10 +1298,10 @@ static void register_leds(struct led_t *l)
                }
        }
 
                }
        }
 

-       ssb_gpio_outen(&ssb_bcm47xx, mask, oe_mask);
-       ssb_gpio_control(&ssb_bcm47xx, mask, 0);
-       ssb_gpio_out(&ssb_bcm47xx, mask, val);
-       ssb_gpio_intmask(&ssb_bcm47xx, mask, 0);
+       gpio_outen(mask, oe_mask);
+       gpio_control(mask, 0);
+       gpio_out(mask, val);
+       gpio_setintmask(mask, 0);

 }
 
 static void unregister_leds(struct led_t *l)
 }
 
 static void unregister_leds(struct led_t *l)


@@ -1336,11 +1336,11 @@ static void led_flash(unsigned long dummy) {
 
        mask &= ~gpiomask;
        if (mask) {
 
        mask &= ~gpiomask;
        if (mask) {

-               u32 val = ~ssb_gpio_in(&ssb_bcm47xx, ~0);
+               u32 val = ~gpio_in();

 
 

-               ssb_gpio_outen(&ssb_bcm47xx, mask, mask);
-               ssb_gpio_control(&ssb_bcm47xx, mask, 0);
-               ssb_gpio_out(&ssb_bcm47xx, mask, val);
+               gpio_outen(mask, mask);
+               gpio_control(mask, 0);
+               gpio_out(mask, val);

        }
        if (mask || extif_blink) {
                mod_timer(&led_timer, jiffies + FLASH_TIME);
        }
        if (mask || extif_blink) {
                mod_timer(&led_timer, jiffies + FLASH_TIME);


@@ -1367,7 +1367,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t
                                        if (led->gpio & GPIO_TYPE_EXTIF) {
                                                len = sprintf(page, "%d\n", led->state);
                                        } else {
                                        if (led->gpio & GPIO_TYPE_EXTIF) {
                                                len = sprintf(page, "%d\n", led->state);
                                        } else {

-                                               u32 in = (ssb_gpio_in(&ssb_bcm47xx, ~0) & led->gpio ? 1 : 0);
+                                               u32 in = (gpio_in() & led->gpio ? 1 : 0);

                                                u8 p = (led->polarity == NORMAL ? 0 : 1);
                                                len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
                                        }
                                                u8 p = (led->polarity == NORMAL ? 0 : 1);
                                                len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
                                        }


@@ -1431,9 +1431,9 @@ static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count,
                                                led->state = p ^ ((page[0] == '1') ? 1 : 0);
                                                set_led_extif(led);
                                        } else {
                                                led->state = p ^ ((page[0] == '1') ? 1 : 0);
                                                set_led_extif(led);
                                        } else {

-                                               ssb_gpio_outen(&ssb_bcm47xx, led->gpio, led->gpio);
-                                               ssb_gpio_control(&ssb_bcm47xx, led->gpio, 0);
-                                               ssb_gpio_out(&ssb_bcm47xx, led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
+                                               gpio_outen(led->gpio, led->gpio);
+                                               gpio_control(led->gpio, 0);
+                                               gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));

                                        }
                                }
                                break;
                                        }
                                }
                                break;


@@ -1464,13 +1464,6 @@ static int __init diag_init(void)
        static struct proc_dir_entry *p;
        static struct platform_t *detected;
 
        static struct proc_dir_entry *p;
        static struct platform_t *detected;
 

-#ifdef CONFIG_BCM47XX_SSB
-       if (bcm47xx_active_bus_type != BCM47XX_BUS_TYPE_SSB) {
-               printk(MODULE_NAME ": bcma bus is not supported.\n");
-               return -ENODEV;
-       }
-#endif
-

        detected = platform_detect();
        if (!detected) {
                printk(MODULE_NAME ": Router model not detected.\n");
        detected = platform_detect();
        if (!detected) {
                printk(MODULE_NAME ": Router model not detected.\n");