---
arch/arm/include/asm/setup.h | 12
- arch/arm/plat-omap/Kconfig | 24
- arch/arm/plat-omap/Makefile | 2
+ arch/arm/plat-omap/Kconfig | 32 +
+ arch/arm/plat-omap/Makefile | 5
arch/arm/plat-omap/bootreason.c | 79 ++
arch/arm/plat-omap/common.c | 70 ++
arch/arm/plat-omap/component-version.c | 64 ++
+ arch/arm/plat-omap/gpio-switch.c | 554 ++++++++++++++++++
arch/arm/plat-omap/include/mach/blizzard.h | 12
arch/arm/plat-omap/include/mach/board-ams-delta.h | 76 ++
arch/arm/plat-omap/include/mach/board-sx1.h | 52 +
arch/arm/plat-omap/include/mach/usb.h | 162 +++++
arch/arm/plat-omap/include/mach/vram.h | 62 ++
arch/arm/plat-omap/include/mach/vrfb.h | 50 +
+ arch/arm/plat-omap/include/plat/board.h | 8
arch/arm/plat-omap/include/plat/cbus.h | 31 +
- 77 files changed, 10001 insertions(+)
+ 79 files changed, 10573 insertions(+), 1 deletion(-)
--- /dev/null
+++ linux-2.6.36-rc4/arch/arm/plat-omap/bootreason.c
+#endif /* __PLAT_CBUS_H */
--- linux-2.6.36-rc4.orig/arch/arm/plat-omap/Kconfig
+++ linux-2.6.36-rc4/arch/arm/plat-omap/Kconfig
-@@ -47,6 +47,30 @@ config OMAP_RESET_CLOCKS
+@@ -47,6 +47,38 @@ config OMAP_RESET_CLOCKS
probably do not want this option enabled until your
device drivers work properly.
+ help
+ Say Y, if you want to have a procfs entry for reading component
+ versions (supplied by the bootloader) in user-space.
++
++config OMAP_GPIO_SWITCH
++ bool "GPIO switch support"
++ help
++ Say Y, if you want to have support for reporting of GPIO
++ switches (e.g. cover switches) via sysfs. Your bootloader has
++ to provide information about the switches to the kernel via the
++ ATAG_BOARD mechanism if they're not defined by the board config.
+
config OMAP_MUX
bool "OMAP multiplexing support"
depends on ARCH_OMAP
--- linux-2.6.36-rc4.orig/arch/arm/plat-omap/Makefile
+++ linux-2.6.36-rc4/arch/arm/plat-omap/Makefile
-@@ -23,6 +23,8 @@ obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-
+@@ -23,6 +23,9 @@ obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
+obj-$(CONFIG_OMAP_BOOT_REASON) += bootreason.o
+obj-$(CONFIG_OMAP_COMPONENT_VERSION) += component-version.o
++obj-$(CONFIG_OMAP_GPIO_SWITCH) += gpio-switch.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+@@ -31,4 +34,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
+ # OMAP mailbox framework
+ obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
+
+-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
+\ No newline at end of file
++obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
--- linux-2.6.36-rc4.orig/arch/arm/include/asm/setup.h
+++ linux-2.6.36-rc4/arch/arm/include/asm/setup.h
@@ -136,6 +136,13 @@ struct tag_acorn {
* DC21285 specific
*/
struct tag_memclk memclk;
+--- /dev/null
++++ linux-2.6.36-rc4/arch/arm/plat-omap/gpio-switch.c
+@@ -0,0 +1,554 @@
++/*
++ * linux/arch/arm/plat-omap/gpio-switch.c
++ *
++ * Copyright (C) 2004-2006 Nokia Corporation
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
++ * and Paul Mundt <paul.mundt@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/sched.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/timer.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++#include <linux/gpio.h>
++#include <plat/hardware.h>
++#include <plat/irqs.h>
++#include <plat/mux.h>
++#include <plat/board.h>
++#include <plat/gpio-switch.h>
++
++struct gpio_switch {
++ char name[14];
++ u16 gpio;
++ unsigned flags:4;
++ unsigned type:4;
++ unsigned state:1;
++ unsigned both_edges:1;
++
++ u16 debounce_rising;
++ u16 debounce_falling;
++
++ void (* notify)(void *data, int state);
++ void *notify_data;
++
++ struct work_struct work;
++ struct timer_list timer;
++ struct platform_device pdev;
++
++ struct list_head node;
++};
++
++static LIST_HEAD(gpio_switches);
++static struct platform_device *gpio_sw_platform_dev;
++static struct platform_driver gpio_sw_driver;
++
++static const struct omap_gpio_switch *board_gpio_sw_table;
++static int board_gpio_sw_count;
++
++static const char *cover_str[2] = { "open", "closed" };
++static const char *connection_str[2] = { "disconnected", "connected" };
++static const char *activity_str[2] = { "inactive", "active" };
++
++/*
++ * GPIO switch state default debounce delay in ms
++ */
++#define OMAP_GPIO_SW_DEFAULT_DEBOUNCE 10
++
++static const char **get_sw_str(struct gpio_switch *sw)
++{
++ switch (sw->type) {
++ case OMAP_GPIO_SWITCH_TYPE_COVER:
++ return cover_str;
++ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
++ return connection_str;
++ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
++ return activity_str;
++ default:
++ BUG();
++ return NULL;
++ }
++}
++
++static const char *get_sw_type(struct gpio_switch *sw)
++{
++ switch (sw->type) {
++ case OMAP_GPIO_SWITCH_TYPE_COVER:
++ return "cover";
++ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
++ return "connection";
++ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
++ return "activity";
++ default:
++ BUG();
++ return NULL;
++ }
++}
++
++static void print_sw_state(struct gpio_switch *sw, int state)
++{
++ const char **str;
++
++ str = get_sw_str(sw);
++ if (str != NULL)
++ printk(KERN_INFO "%s (GPIO %d) is now %s\n", sw->name, sw->gpio, str[state]);
++}
++
++static int gpio_sw_get_state(struct gpio_switch *sw)
++{
++ int state;
++
++ state = gpio_get_value(sw->gpio);
++ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
++ state = !state;
++
++ return state;
++}
++
++static ssize_t gpio_sw_state_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf,
++ size_t count)
++{
++ struct gpio_switch *sw = dev_get_drvdata(dev);
++ const char **str;
++ char state[16];
++ int enable;
++
++ if (!(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT))
++ return -EPERM;
++
++ if (sscanf(buf, "%15s", state) != 1)
++ return -EINVAL;
++
++ str = get_sw_str(sw);
++ if (strcmp(state, str[0]) == 0)
++ sw->state = enable = 0;
++ else if (strcmp(state, str[1]) == 0)
++ sw->state = enable = 1;
++ else
++ return -EINVAL;
++
++ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
++ enable = !enable;
++ gpio_set_value(sw->gpio, enable);
++
++ return count;
++}
++
++static ssize_t gpio_sw_state_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct gpio_switch *sw = dev_get_drvdata(dev);
++ const char **str;
++
++ str = get_sw_str(sw);
++ return sprintf(buf, "%s\n", str[sw->state]);
++}
++
++static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, gpio_sw_state_show,
++ gpio_sw_state_store);
++
++static ssize_t gpio_sw_type_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct gpio_switch *sw = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%s\n", get_sw_type(sw));
++}
++
++static DEVICE_ATTR(type, S_IRUGO, gpio_sw_type_show, NULL);
++
++static ssize_t gpio_sw_direction_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct gpio_switch *sw = dev_get_drvdata(dev);
++ int is_output;
++
++ is_output = sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT;
++ return sprintf(buf, "%s\n", is_output ? "output" : "input");
++}
++
++static DEVICE_ATTR(direction, S_IRUGO, gpio_sw_direction_show, NULL);
++
++
++static irqreturn_t gpio_sw_irq_handler(int irq, void *arg)
++{
++ struct gpio_switch *sw = arg;
++ unsigned long timeout;
++ int state;
++
++ if (!sw->both_edges) {
++ if (gpio_get_value(sw->gpio))
++ set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_FALLING);
++ else
++ set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_RISING);
++ }
++
++ state = gpio_sw_get_state(sw);
++ if (sw->state == state)
++ return IRQ_HANDLED;
++
++ if (state)
++ timeout = sw->debounce_rising;
++ else
++ timeout = sw->debounce_falling;
++ if (!timeout)
++ schedule_work(&sw->work);
++ else
++ mod_timer(&sw->timer, jiffies + msecs_to_jiffies(timeout));
++
++ return IRQ_HANDLED;
++}
++
++static void gpio_sw_timer(unsigned long arg)
++{
++ struct gpio_switch *sw = (struct gpio_switch *) arg;
++
++ schedule_work(&sw->work);
++}
++
++static void gpio_sw_handler(struct work_struct *work)
++{
++ struct gpio_switch *sw = container_of(work, struct gpio_switch, work);
++ int state;
++
++ state = gpio_sw_get_state(sw);
++ if (sw->state == state)
++ return;
++
++ sw->state = state;
++ if (sw->notify != NULL)
++ sw->notify(sw->notify_data, state);
++ sysfs_notify(&sw->pdev.dev.kobj, NULL, "state");
++ print_sw_state(sw, state);
++}
++
++static int __init can_do_both_edges(struct gpio_switch *sw)
++{
++ if (!cpu_class_is_omap1())
++ return 1;
++ if (OMAP_GPIO_IS_MPUIO(sw->gpio))
++ return 0;
++ else
++ return 1;
++}
++
++static void gpio_sw_release(struct device *dev)
++{
++}
++
++static int __init new_switch(struct gpio_switch *sw)
++{
++ int r, direction, trigger;
++
++ switch (sw->type) {
++ case OMAP_GPIO_SWITCH_TYPE_COVER:
++ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
++ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
++ break;
++ default:
++ printk(KERN_ERR "invalid GPIO switch type: %d\n", sw->type);
++ return -EINVAL;
++ }
++
++ sw->pdev.name = sw->name;
++ sw->pdev.id = -1;
++
++ sw->pdev.dev.parent = &gpio_sw_platform_dev->dev;
++ sw->pdev.dev.driver = &gpio_sw_driver.driver;
++ sw->pdev.dev.release = gpio_sw_release;
++
++ r = platform_device_register(&sw->pdev);
++ if (r) {
++ printk(KERN_ERR "gpio-switch: platform device registration "
++ "failed for %s", sw->name);
++ return r;
++ }
++ dev_set_drvdata(&sw->pdev.dev, sw);
++
++ r = gpio_request(sw->gpio, "gpio-switch");
++ if (r < 0) {
++ platform_device_unregister(&sw->pdev);
++ return r;
++ }
++
++ /* input: 1, output: 0 */
++ direction = !(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT);
++ if (direction)
++ gpio_direction_input(sw->gpio);
++ else
++ gpio_direction_output(sw->gpio, 0);
++
++ sw->state = gpio_sw_get_state(sw);
++
++ r = 0;
++ r |= device_create_file(&sw->pdev.dev, &dev_attr_state);
++ r |= device_create_file(&sw->pdev.dev, &dev_attr_type);
++ r |= device_create_file(&sw->pdev.dev, &dev_attr_direction);
++ if (r)
++ printk(KERN_ERR "gpio-switch: attribute file creation "
++ "failed for %s\n", sw->name);
++
++ if (!direction)
++ return 0;
++
++ if (can_do_both_edges(sw)) {
++ trigger = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
++ sw->both_edges = 1;
++ } else {
++ if (gpio_get_value(sw->gpio))
++ trigger = IRQF_TRIGGER_FALLING;
++ else
++ trigger = IRQF_TRIGGER_RISING;
++ }
++ r = request_irq(OMAP_GPIO_IRQ(sw->gpio), gpio_sw_irq_handler,
++ IRQF_SHARED | trigger, sw->name, sw);
++ if (r < 0) {
++ printk(KERN_ERR "gpio-switch: request_irq() failed "
++ "for GPIO %d\n", sw->gpio);
++ platform_device_unregister(&sw->pdev);
++ gpio_free(sw->gpio);
++ return r;
++ }
++
++ INIT_WORK(&sw->work, gpio_sw_handler);
++ init_timer(&sw->timer);
++
++ sw->timer.function = gpio_sw_timer;
++ sw->timer.data = (unsigned long)sw;
++
++ list_add(&sw->node, &gpio_switches);
++
++ return 0;
++}
++
++static int __init add_atag_switches(void)
++{
++ const struct omap_gpio_switch_config *cfg;
++ struct gpio_switch *sw;
++ int i, r;
++
++ for (i = 0; ; i++) {
++ cfg = omap_get_nr_config(OMAP_TAG_GPIO_SWITCH,
++ struct omap_gpio_switch_config, i);
++ if (cfg == NULL)
++ break;
++ sw = kzalloc(sizeof(*sw), GFP_KERNEL);
++ if (sw == NULL) {
++ printk(KERN_ERR "gpio-switch: kmalloc failed\n");
++ return -ENOMEM;
++ }
++ strncpy(sw->name, cfg->name, sizeof(cfg->name));
++ sw->gpio = cfg->gpio;
++ sw->flags = cfg->flags;
++ sw->type = cfg->type;
++ sw->debounce_rising = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
++ sw->debounce_falling = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
++ if ((r = new_switch(sw)) < 0) {
++ kfree(sw);
++ return r;
++ }
++ }
++ return 0;
++}
++
++static struct gpio_switch * __init find_switch(int gpio, const char *name)
++{
++ struct gpio_switch *sw;
++
++ list_for_each_entry(sw, &gpio_switches, node) {
++ if ((gpio < 0 || sw->gpio != gpio) &&
++ (name == NULL || strcmp(sw->name, name) != 0))
++ continue;
++
++ if (gpio < 0 || name == NULL)
++ goto no_check;
++
++ if (strcmp(sw->name, name) != 0)
++ printk("gpio-switch: name mismatch for %d (%s, %s)\n",
++ gpio, name, sw->name);
++ else if (sw->gpio != gpio)
++ printk("gpio-switch: GPIO mismatch for %s (%d, %d)\n",
++ name, gpio, sw->gpio);
++no_check:
++ return sw;
++ }
++ return NULL;
++}
++
++static int __init add_board_switches(void)
++{
++ int i;
++
++ for (i = 0; i < board_gpio_sw_count; i++) {
++ const struct omap_gpio_switch *cfg;
++ struct gpio_switch *sw;
++ int r;
++
++ cfg = board_gpio_sw_table + i;
++ if (strlen(cfg->name) > sizeof(sw->name) - 1)
++ return -EINVAL;
++ /* Check whether we only update an existing switch
++ * or add a new switch. */
++ sw = find_switch(cfg->gpio, cfg->name);
++ if (sw != NULL) {
++ sw->debounce_rising = cfg->debounce_rising;
++ sw->debounce_falling = cfg->debounce_falling;
++ sw->notify = cfg->notify;
++ sw->notify_data = cfg->notify_data;
++ continue;
++ } else {
++ if (cfg->gpio < 0 || cfg->name == NULL) {
++ printk("gpio-switch: required switch not "
++ "found (%d, %s)\n", cfg->gpio,
++ cfg->name);
++ continue;
++ }
++ }
++ sw = kzalloc(sizeof(*sw), GFP_KERNEL);
++ if (sw == NULL) {
++ printk(KERN_ERR "gpio-switch: kmalloc failed\n");
++ return -ENOMEM;
++ }
++ strlcpy(sw->name, cfg->name, sizeof(sw->name));
++ sw->gpio = cfg->gpio;
++ sw->flags = cfg->flags;
++ sw->type = cfg->type;
++ sw->debounce_rising = cfg->debounce_rising;
++ sw->debounce_falling = cfg->debounce_falling;
++ sw->notify = cfg->notify;
++ sw->notify_data = cfg->notify_data;
++ if ((r = new_switch(sw)) < 0) {
++ kfree(sw);
++ return r;
++ }
++ }
++ return 0;
++}
++
++static void gpio_sw_cleanup(void)
++{
++ struct gpio_switch *sw = NULL, *old = NULL;
++
++ list_for_each_entry(sw, &gpio_switches, node) {
++ if (old != NULL)
++ kfree(old);
++ flush_scheduled_work();
++ del_timer_sync(&sw->timer);
++
++ free_irq(OMAP_GPIO_IRQ(sw->gpio), sw);
++
++ device_remove_file(&sw->pdev.dev, &dev_attr_state);
++ device_remove_file(&sw->pdev.dev, &dev_attr_type);
++ device_remove_file(&sw->pdev.dev, &dev_attr_direction);
++
++ platform_device_unregister(&sw->pdev);
++ gpio_free(sw->gpio);
++ old = sw;
++ }
++ kfree(old);
++}
++
++static void __init report_initial_state(void)
++{
++ struct gpio_switch *sw;
++
++ list_for_each_entry(sw, &gpio_switches, node) {
++ int state;
++
++ state = gpio_get_value(sw->gpio);
++ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
++ state = !state;
++ if (sw->notify != NULL)
++ sw->notify(sw->notify_data, state);
++ print_sw_state(sw, state);
++ }
++}
++
++static int gpio_sw_remove(struct platform_device *dev)
++{
++ return 0;
++}
++
++static struct platform_driver gpio_sw_driver = {
++ .remove = gpio_sw_remove,
++ .driver = {
++ .name = "gpio-switch",
++ },
++};
++
++void __init omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
++ int count)
++{
++ BUG_ON(board_gpio_sw_table != NULL);
++
++ board_gpio_sw_table = tbl;
++ board_gpio_sw_count = count;
++}
++
++static int __init gpio_sw_init(void)
++{
++ int r;
++
++ printk(KERN_INFO "OMAP GPIO switch handler initializing\n");
++
++ r = platform_driver_register(&gpio_sw_driver);
++ if (r)
++ return r;
++
++ gpio_sw_platform_dev = platform_device_register_simple("gpio-switch",
++ -1, NULL, 0);
++ if (IS_ERR(gpio_sw_platform_dev)) {
++ r = PTR_ERR(gpio_sw_platform_dev);
++ goto err1;
++ }
++
++ r = add_atag_switches();
++ if (r < 0)
++ goto err2;
++
++ r = add_board_switches();
++ if (r < 0)
++ goto err2;
++
++ report_initial_state();
++
++ return 0;
++err2:
++ gpio_sw_cleanup();
++ platform_device_unregister(gpio_sw_platform_dev);
++err1:
++ platform_driver_unregister(&gpio_sw_driver);
++ return r;
++}
++
++static void __exit gpio_sw_exit(void)
++{
++ gpio_sw_cleanup();
++ platform_device_unregister(gpio_sw_platform_dev);
++ platform_driver_unregister(&gpio_sw_driver);
++}
++
++#ifndef MODULE
++late_initcall(gpio_sw_init);
++#else
++module_init(gpio_sw_init);
++#endif
++module_exit(gpio_sw_exit);
++
++MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>, Paul Mundt <paul.mundt@nokia.com");
++MODULE_DESCRIPTION("GPIO switch driver");
++MODULE_LICENSE("GPL");
+--- linux-2.6.36-rc4.orig/arch/arm/plat-omap/include/plat/board.h
++++ linux-2.6.36-rc4/arch/arm/plat-omap/include/plat/board.h
+@@ -151,6 +151,14 @@ struct omap_board_config_kernel {
+ const void *data;
+ };
+
++struct omap_gpio_switch_config {
++ char name[12];
++ u16 gpio;
++ int flags:4;
++ int type:4;
++ int key_code:24; /* Linux key code */
++};
++
+ extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+ #define omap_get_config(tag, type) \
projects / openwrt.git / blobdiff