[kernel] remove support for 2.6.27, no target is using it anymore
[openwrt.git] / package / broadcom-diag / src / diag.c
index 3f92997..89af0f7 100644 (file)
@@ -19,7 +19,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  *
- * $Id$
  */
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -55,21 +54,29 @@ module_param(gpiomask, int, 0644);
 enum {
        /* Linksys */
        WAP54GV1,
+       WAP54GV2,
        WAP54GV3,
        WRT54GV1,
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
+       WRT160N,
        WRT350N,
+       WRT600N,
+       WRT600NV11,
+       WRT610N,
 
        /* ASUS */
        WLHDD,
        WL300G,
+       WL320GE,
+       WL330GE,
        WL500G,
        WL500GD,
        WL500GP,
        WL500GPV2,
        WL500W,
+       WL520GC,
        WL520GU,
        ASUS_4702,
        WL700GE,
@@ -96,6 +103,7 @@ enum {
 
        /* Dell */
        TM2300,
+       TM2300V2,
 
        /* Motorola */
        WE800G,
@@ -117,6 +125,7 @@ enum {
 
        /* D-Link */
        DIR130,
+       DIR320,
        DIR330,
        DWL3150,
 
@@ -141,9 +150,12 @@ static void __init bcm4780_init(void) {
 static void __init bcm57xx_init(void) {
        int pin = 1 << 2;
 
+#ifndef LINUX_2_4
+       /* FIXME: switch comes up, but port mappings/vlans not right */
        gpio_outen(pin, pin);
        gpio_control(pin, 0);
        gpio_out(pin, pin);
+#endif
 }
 
 static struct platform_t __initdata platforms[] = {
@@ -158,6 +170,16 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "wlan",       .gpio = 1 << 4 },
                },
        },
+       [WAP54GV2] = {
+               .name           = "Linksys WAP54G V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 5, .polarity = REVERSE },
+                       /* GPIO 6 is b44 (eth0, LAN) PHY power */
+               },
+       },
        [WAP54GV3] = {
                .name           = "Linksys WAP54G V3",
                .buttons        = {
@@ -221,6 +243,18 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
+       [WRT160N] = {
+               .name           = "Linksys WRT160N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "ses_blue",   .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
@@ -236,6 +270,51 @@ static struct platform_t __initdata platforms[] = {
                },
                .platform_init = bcm57xx_init,
        },
+       [WRT600N] = {
+               .name           = "Linksys WRT600N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",              .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
+                       { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
+                       { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
+                       { .name = "wl0_ses_green",      .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
+                       { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+                       { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+               },
+               .platform_init = bcm57xx_init,
+       },
+       [WRT600NV11] = {
+               .name           = "Linksys WRT600N V1.1",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",             .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
+                       { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
+                       { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
+                       { .name = "wl0_ses_green",     .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
+                       { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+                       { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+               },
+               .platform_init = bcm57xx_init,
+       },
+       [WRT610N] = {
+               .name           = "Linksys WRT610N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 8 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1,  .polarity = NORMAL }, // Power LED
+                       { .name = "usb",        .gpio = 1 << 0,  .polarity = REVERSE }, // USB LED
+                       { .name = "ses_amber",  .gpio = 1 << 3,  .polarity = REVERSE }, // WiFi protected setup LED amber
+                       { .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
+               },
+       },
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
@@ -256,6 +335,26 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
                },
        },
+       [WL320GE] = {
+               .name           = "ASUS WL-320gE/WL-320gP",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 2, .polarity = REVERSE },
+                       { .name = "link",       .gpio = 1 << 11, .polarity = REVERSE },
+               },
+       },
+       [WL330GE] = {
+               .name           = "ASUS WL-330gE",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
        [WL500G] = {
                .name           = "ASUS WL-500g",
                .buttons        = {
@@ -284,6 +383,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
                },
        },
+       [WL500GPV2] = {
+               .name           = "ASUS WL-500g Premium V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+                       { .name = "ses",        .gpio = 1 << 3 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
        [WL500W] = {
                .name           = "ASUS WL-500W",
                .buttons        = {
@@ -294,6 +404,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
                },
        },
+       [WL520GC] = {
+               .name           = "ASUS WL-520GC",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+                       { .name = "ses",        .gpio = 1 << 3 },
+               },
+               .leds           = {
+               { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
        [WL520GU] = {
                .name           = "ASUS WL-520gU",
                .buttons        = {
@@ -468,7 +589,8 @@ static struct platform_t __initdata platforms[] = {
                        /* No usable buttons */
                },
                .leds           = {
-                       { .name = "dmz",        .gpio = 1 << 4, .polarity = REVERSE },
+//                     { .name = "power",      .gpio = 1 << 0  .polarity = REVERSE },  // Usable when retrofitting D26 (?)
+                       { .name = "dmz",        .gpio = 1 << 4, .polarity = REVERSE },  // actual name WWW
                        { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
@@ -479,7 +601,7 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
-                       { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },  // actual name WWW
                        { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
                },
        },
@@ -505,6 +627,16 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
                },
        },
+       [TM2300V2] = {
+               .name           = "Dell TrueMobile 2300 v2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
        /* Motorola */
        [WE800G] = {
                .name           = "Motorola WE800G",
@@ -614,6 +746,20 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
+       [DIR320] = {
+               .name     = "D-Link DIR-320",
+               .buttons        = {
+                       { .name = "reserved",   .gpio = 1 << 6},
+                       { .name = "reset",      .gpio = 1 << 7},
+               },
+               .leds      = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
+                       { .name = "red",        .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "blue",       .gpio = 1 << 4, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 5, .polarity = NORMAL },
+               },
+       },
        [DIR330] = {
                .name     = "D-Link DIR-330",
                .buttons        = {
@@ -659,31 +805,45 @@ static struct platform_t __init *platform_detect(void)
        /* Look for a model identifier */
 
        /* Based on "model_name" */
-       if (buf = nvram_get("model_name")) {
+       if ((buf = nvram_get("model_name"))) {
                if (!strcmp(buf, "DIR-130"))
                        return &platforms[DIR130];
                if (!strcmp(buf, "DIR-330"))
                        return &platforms[DIR330];
        }
 
+       /* Based on "wsc_modelname */
+       if ((buf = nvram_get("wsc_modelname"))) {
+               if (!strcmp(buf, "WRT610N"))
+                       return &platforms[WRT610N];
+       }
+
        /* Based on "model_no" */
-       if (buf = nvram_get("model_no")) {
+       if ((buf = nvram_get("model_no"))) {
                if (startswith(buf,"WL700")) /* WL700* */
                        return &platforms[WL700GE];
        }
 
        /* Based on "hardware_version" */
-       if (buf = nvram_get("hardware_version")) {
+       if ((buf = nvram_get("hardware_version"))) {
+               if (startswith(buf,"WL500GPV2-")) /* WL500GPV2-* */
+                       return &platforms[WL500GPV2];
+               if (startswith(buf,"WL520GC-")) /* WL520GU-* */
+                       return &platforms[WL520GC];
                if (startswith(buf,"WL520GU-")) /* WL520GU-* */
                        return &platforms[WL520GU];
+               if (startswith(buf,"WL330GE-")) /* WL330GE-* */
+                       return &platforms[WL330GE];
        }
 
        /* Based on "ModelId" */
-       if (buf = nvram_get("ModelId")) {
+       if ((buf = nvram_get("ModelId"))) {
                if (!strcmp(buf, "WR850GP"))
                        return &platforms[WR850GP];
-               if (!strcmp(buf,"WX-5565"))
-                       return &platforms[TM2300];
+               if (!strcmp(buf, "WR850G"))
+                       return &platforms[WR850GV2V3];
+               if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap"))
+                       return &platforms[TM2300]; /* Dell TrueMobile 2300 */
                if (startswith(buf,"WE800G")) /* WE800G* */
                        return &platforms[WE800G];
        }
@@ -715,6 +875,14 @@ static struct platform_t __init *platform_detect(void)
        boardnum = getvar("boardnum");
        boardtype = getvar("boardtype");
 
+       if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N  v1/V1.1 */
+               if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395"))
+                       return &platforms[WRT600NV11];
+
+       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0"))
+                       return &platforms[WRT600N];
+       }
+
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
@@ -727,15 +895,27 @@ static struct platform_t __init *platform_detect(void)
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
                                return &platforms[WRTSL54GS];
 
+                       if (!strcmp(boardtype, "0x0472"))
+                               return &platforms[WRT160N];
+
                        /* default to WRT54G */
                        return &platforms[WRT54G];
                }
+               if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+                       return &platforms[WAP54GV2];
+
+               if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
+                       if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
+                               return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */
+               }
 
                if (!strcmp(boardnum, "45")) { /* ASUS */
                        if (!strcmp(boardtype,"0x042f"))
                                return &platforms[WL500GP];
                        else if (!strcmp(boardtype,"0x0472"))
                                return &platforms[WL500W];
+                       else if (!strcmp(boardtype,"0x467"))
+                               return &platforms[WL320GE];
                        else
                                return &platforms[WL500GD];
                }
@@ -743,6 +923,13 @@ static struct platform_t __init *platform_detect(void)
                if (!strcmp(boardnum, "10496"))
                        return &platforms[USR5461];
 
+               if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
+                       return &platforms[SE505V2];
+
+               if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
+                               !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
+                       return &platforms[DIR320];
+
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
@@ -813,14 +1000,14 @@ static void register_buttons(struct button_t *b)
        gpio_control(platform.button_mask, 0);
        platform.button_polarity = gpio_in() & platform.button_mask;
        gpio_intpolarity(platform.button_mask, platform.button_polarity);
-       gpio_intmask(platform.button_mask, platform.button_mask);
+       gpio_setintmask(platform.button_mask, platform.button_mask);
 
        gpio_set_irqenable(1, button_handler);
 }
 
 static void unregister_buttons(struct button_t *b)
 {
-       gpio_intmask(platform.button_mask, 0);
+       gpio_setintmask(platform.button_mask, 0);
 
        gpio_set_irqenable(0, button_handler);
 }
@@ -934,7 +1121,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
 
        changed &= ~gpio_outen(0, 0);
 
-       for (b = platform.buttons; b->name; b++) { 
+       for (b = platform.buttons; b->name; b++) {
                struct event_t *event;
 
                if (!(b->gpio & changed)) continue;
@@ -977,7 +1164,7 @@ static void register_leds(struct led_t *l)
                        l->state = 0;
                        set_led_extif(l);
                } else {
-                       if (l->polarity != INPUT) oe_mask != l->gpio;
+                       if (l->polarity != INPUT) oe_mask |= l->gpio;
                        mask |= l->gpio;
                        val |= (l->polarity == NORMAL)?0:l->gpio;
                }
@@ -995,6 +1182,7 @@ static void register_leds(struct led_t *l)
        gpio_outen(mask, oe_mask);
        gpio_control(mask, 0);
        gpio_out(mask, val);
+       gpio_setintmask(mask, 0);
 }
 
 static void unregister_leds(struct led_t *l)
This page took 0.032389 seconds and 4 git commands to generate.