-Index: linux-2.6.25.7/drivers/char/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/char/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/char/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -113,6 +113,10 @@
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -114,6 +114,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
# Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c
-Index: linux-2.6.25.7/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/mtd/maps/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/mtd/maps/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -68,3 +68,4 @@
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
-Index: linux-2.6.25.7/drivers/net/Kconfig
-===================================================================
---- linux-2.6.25.7.orig/drivers/net/Kconfig 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/net/Kconfig 2008-06-26 09:53:53.000000000 +0200
-@@ -351,6 +351,12 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -351,6 +351,12 @@ config MACB
source "drivers/net/arm/Kconfig"
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH
-Index: linux-2.6.25.7/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.25.7.orig/drivers/serial/Kconfig 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/serial/Kconfig 2008-06-26 09:53:53.000000000 +0200
-@@ -1327,6 +1327,14 @@
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1334,6 +1334,14 @@ config SERIAL_OF_PLATFORM
Currently, only 8250 compatible ports are supported, but
others can easily be added.
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE
-Index: linux-2.6.25.7/drivers/serial/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/serial/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/serial/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -66,4 +66,5 @@
- obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
- obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -68,3 +68,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-Index: linux-2.6.25.7/drivers/watchdog/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/watchdog/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/watchdog/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -96,6 +96,7 @@
++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
# PARISC Architecture
-Index: linux-2.6.25.7/drivers/net/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/net/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/net/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -254,3 +254,4 @@
- obj-$(CONFIG_NETXEN_NIC) += netxen/
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+ obj-$(CONFIG_SFC) += sfc/
+-
+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
-Index: linux-2.6.25.7/drivers/crypto/Kconfig
-===================================================================
---- linux-2.6.25.7.orig/drivers/crypto/Kconfig 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/crypto/Kconfig 2008-06-26 09:53:53.000000000 +0200
-@@ -9,6 +9,9 @@
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
If you say N, all options in this submenu will be skipped and disabled.
if CRYPTO_HW
config CRYPTO_DEV_PADLOCK
tristate "Support for VIA PadLock ACE"
-Index: linux-2.6.25.7/drivers/crypto/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/crypto/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/crypto/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -2,3 +2,4 @@
- obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
- obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
+--- a/drivers/crypto/Makefile
++++ b/drivers/crypto/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
+ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
-Index: linux-2.6.25.7/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.25.7.orig/drivers/usb/host/Kconfig 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/usb/host/Kconfig 2008-06-26 09:53:53.000000000 +0200
-@@ -260,3 +260,9 @@
- To compile this driver as a module, choose M here: the
- module will be called r8a66597-hcd.
-
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
+ help
+ This driver enables support for the on-chip R8A66597 in the
+ SH7366 and SH7723 processors.
++
+config USB_DWC_HCD
+ tristate "IFXMIPS USB Host Controller Driver"
-+ depends on USB && IFXMIPS
++ depends on USB && IFXMIPS
+ default y
+ help
-+ Danube USB Host Controller
-Index: linux-2.6.25.7/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/usb/host/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/usb/host/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -16,4 +16,6 @@
- obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
- obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
--
-+obj-$(CONFIG_USB_DWC_HCD) += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o \
-+ dwc_otg_attr.o dwc_otg_driver.o dwc_otg_cil.o \
-+ dwc_otg_cil_intr.o dwc_otg_proc.o dwc_otg_ifx.o
-Index: linux-2.6.25.7/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.7.orig/drivers/leds/Kconfig 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/leds/Kconfig 2008-06-26 09:53:53.000000000 +0200
-@@ -151,6 +151,12 @@
++ Danube USB Host Controller
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -153,6 +153,12 @@ config LEDS_CLEVO_MAIL
To compile this driver as a module, choose M here: the
module will be called leds-clevo-mail.
comment "LED Triggers"
config LEDS_TRIGGERS
-Index: linux-2.6.25.7/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.7.orig/drivers/leds/Makefile 2008-06-26 09:53:43.000000000 +0200
-+++ linux-2.6.25.7/drivers/leds/Makefile 2008-06-26 09:53:53.000000000 +0200
-@@ -22,6 +22,7 @@
- obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270)
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
-+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
+ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
++obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-Index: linux-2.6.25.7/drivers/watchdog/Kconfig
-===================================================================
---- linux-2.6.25.7.orig/drivers/watchdog/Kconfig 2008-06-26 10:21:00.000000000 +0200
-+++ linux-2.6.25.7/drivers/watchdog/Kconfig 2008-06-26 10:22:13.000000000 +0200
-@@ -670,6 +670,12 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -683,6 +683,12 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
projects / openwrt.git / blobdiff