suspect umount may be causing reboot issues

[openwrt.git] / openwrt / target / default / target_skeleton / etc / nvram.overrides

diff --git a/openwrt/target/default/target_skeleton/etc/nvram.overrides b/openwrt/target/default/target_skeleton/etc/nvram.overrides
index acbba30..8132c08 100644 (file)
--- a/openwrt/target/default/target_skeleton/etc/nvram.overrides
+++ b/openwrt/target/default/target_skeleton/etc/nvram.overrides
@@ -3,6 +3,9 @@
 # This file handles the NVRAM quirks of various hardware.
 # THIS FILE IS NOT A REPLACEMENT FOR NVRAM
 
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
 # linksys bug; remove when not using static configuration for lan
 NVRAM_lan_proto="static"
 
@@ -37,16 +40,45 @@ NVRAM_lan_proto="static"
   FAILSAFE_ifnames="eth0 eth1"
 }
 
+# hacks for buffalo wla2-g54l
+[ "$(nvram get boardnum)" = "00" ] && \
+[ "$(nvram get product_name)" = "Product_name" ] && {
+  debug "### wla2-g54l hacks ###"
+  NVRAM_lan_ifnames="vlan0"
+  NVRAM_wan_ifname="none"
+}
+
+# hack for asus wl-500g hardware
+[ "$(nvram get boardnum)"  = "asusX" ] && \
+[ "$(nvram get boardtype)"  = "bcm94710dev" ] && {
+  FAILSAFE_lan_ifnames="eth0 eth2"
+}
+
+# hacks for asus wl-500g deluxe
+[ "$(nvram get boardtype)" = "bcm95365r" ] && \
+[ "$(nvram get boardnum)" = "45" ] && {
+  debug "### wl-500g deluxe hacks ###"
+  NVRAM_vlan0hwname="et0"
+  NVRAM_vlan1hwname="et0"
+  NVRAM_lan_ifnames="vlan0 eth1"
+  [ "$(nvram get wan_ifname)" = "eth0.1" ] && {
+    NVRAM_wan_ifname="vlan1"
+  }
+}
+
 # defaults if lan_ifname is missing
 [ -z "$(nvram get lan_ifname)" ] && {
   NVRAM_lan_ifname="br0"
-  NVRAM_lan_ifnames="vlan0 vlan2 eth1 eth2 eth3"
+  NVRAM_lan_ifnames=${FAILSAFE_lan_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}
 }
 
 # defaults if wan_ifname is missing
 [ -z "$(nvram get wan_ifname)" ] && {
    NVRAM_wan_ifname="vlan1"
    NVRAM_wan_proto="dhcp"
+   [ "$asus" ] && {
+     NVRAM_wan_ifname="eth1"
+   }
 }
 
 # failsafe if reset is held
@@ -54,9 +86,9 @@ NVRAM_lan_proto="static"
   echo "### YOU ARE IN FAILSAFE MODE ####"
   NVRAM_lan_ifname="br0"
   NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1"}
-  NVRAM_lan_ipaddr="192.168.1.1"
-  NVRAM_lan_netmask="255.255.255.0"
-  NVRAM_lan_hwaddr="00:0B:AD:0A:DD:00"
+  NVRAM_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+  NVRAM_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+  NVRAM_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
   NVRAM_wan_ifname="none"
   NVRAM_wifi_ifname="none"
 }