Allow use of the offline_root option

[openwrt.git] / openwrt / target / default / target_skeleton / etc / nvram.overrides

diff --git a/openwrt/target/default/target_skeleton/etc/nvram.overrides b/openwrt/target/default/target_skeleton/etc/nvram.overrides
index acbba30..206c90b 100644 (file)
--- a/openwrt/target/default/target_skeleton/etc/nvram.overrides
+++ b/openwrt/target/default/target_skeleton/etc/nvram.overrides
@@ -3,6 +3,14 @@
 # This file handles the NVRAM quirks of various hardware.
 # THIS FILE IS NOT A REPLACEMENT FOR NVRAM
 
 # This file handles the NVRAM quirks of various hardware.
 # THIS FILE IS NOT A REPLACEMENT FOR NVRAM
 

+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+[ "$(nvram get boardnum)"  = "asusX" ] && \
+  [ "$(nvram get boardtype)"  = "bcm94710dev" ] && {
+  asus=1
+}
+

 # linksys bug; remove when not using static configuration for lan
 NVRAM_lan_proto="static"
 
 # linksys bug; remove when not using static configuration for lan
 NVRAM_lan_proto="static"
 


@@ -37,16 +45,24 @@ NVRAM_lan_proto="static"
   FAILSAFE_ifnames="eth0 eth1"
 }
 
   FAILSAFE_ifnames="eth0 eth1"
 }
 

+# hack for asus wl-500g hardware
+[ $asus ] && {
+    FAILSAFE_lan_ifnames="eth0 eth2"
+}
+

 # defaults if lan_ifname is missing
 [ -z "$(nvram get lan_ifname)" ] && {
   NVRAM_lan_ifname="br0"
 # defaults if lan_ifname is missing
 [ -z "$(nvram get lan_ifname)" ] && {
   NVRAM_lan_ifname="br0"

-  NVRAM_lan_ifnames="vlan0 vlan2 eth1 eth2 eth3"
+  NVRAM_lan_ifnames=${FAILSAFE_lan_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}

 }
 
 # defaults if wan_ifname is missing
 [ -z "$(nvram get wan_ifname)" ] && {
    NVRAM_wan_ifname="vlan1"
    NVRAM_wan_proto="dhcp"
 }
 
 # defaults if wan_ifname is missing
 [ -z "$(nvram get wan_ifname)" ] && {
    NVRAM_wan_ifname="vlan1"
    NVRAM_wan_proto="dhcp"

+   [ "$asus" ] && {
+     NVRAM_wan_ifname="eth1"
+   }

 }
 
 # failsafe if reset is held
 }
 
 # failsafe if reset is held


@@ -54,9 +70,9 @@ NVRAM_lan_proto="static"
   echo "### YOU ARE IN FAILSAFE MODE ####"
   NVRAM_lan_ifname="br0"
   NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1"}
   echo "### YOU ARE IN FAILSAFE MODE ####"
   NVRAM_lan_ifname="br0"
   NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1"}

-  NVRAM_lan_ipaddr="192.168.1.1"
-  NVRAM_lan_netmask="255.255.255.0"
-  NVRAM_lan_hwaddr="00:0B:AD:0A:DD:00"
+  NVRAM_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+  NVRAM_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+  NVRAM_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}

   NVRAM_wan_ifname="none"
   NVRAM_wifi_ifname="none"
 }
   NVRAM_wan_ifname="none"
   NVRAM_wifi_ifname="none"
 }