generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0

[openwrt.git] / docs / wireless.tex

diff --git a/docs/wireless.tex b/docs/wireless.tex
index d92fa76..efb07ea 100644 (file)
--- a/docs/wireless.tex
+++ b/docs/wireless.tex
@@ -117,10 +117,13 @@ config wifi-iface
     option key2     key 2
     option key3     key 3
     option key4     key 4
     option key2     key 2
     option key3     key 3
     option key4     key 4

+    option passphrase 0,1

     option server   ip address
     option port     port
     option hidden   0,1
     option isolate  0,1        (broadcom)
     option server   ip address
     option port     port
     option hidden   0,1
     option isolate  0,1        (broadcom)

+    option doth     0,1        (atheros, broadcom)
+    option wmm      0,1        (atheros, broadcom)

 \end{Verbatim}
 
 \paragraph{Options for the \texttt{wifi-device}:}
 \end{Verbatim}
 
 \paragraph{Options for the \texttt{wifi-device}:}


@@ -217,6 +220,13 @@ config wifi-iface
     \item \texttt{key, key1, key2, key3, key4} (wep, wpa and psk) \\
         WEP key, WPA key (PSK mode) or the RADIUS shared secret (WPA RADIUS mode)
 
     \item \texttt{key, key1, key2, key3, key4} (wep, wpa and psk) \\
         WEP key, WPA key (PSK mode) or the RADIUS shared secret (WPA RADIUS mode)
 

+    \item \texttt{passphrase} (wpa) \\
+        0 treats the wpa psk as a text passphrase; 1 treats wpa psk as
+        encoded passphrase. You can generate an encoded passphrase with
+        the wpa\_passphrase utility. This is especially useful if your
+        passphrase contains special characters. This option only works
+        when using mac80211 or atheros type devices.
+

     \item \texttt{server} (wpa) \\
         The RADIUS server ip address
 
     \item \texttt{server} (wpa) \\
         The RADIUS server ip address
 


@@ -230,6 +240,14 @@ config wifi-iface
         Optional: Isolation is a mode usually set on hotspots that limits the clients to communicate only with the AP and not with other wireless clients.
         0 disables ap isolation (default); 1 enables ap isolation.
 
         Optional: Isolation is a mode usually set on hotspots that limits the clients to communicate only with the AP and not with other wireless clients.
         0 disables ap isolation (default); 1 enables ap isolation.
 

+    \item \texttt{doth} \\
+        Optional: Toggle 802.11h mode.
+        0 disables 802.11h (default); 1 enables it.
+
+    \item \texttt{wmm} \\
+        Optional: Toggle 802.11e mode.
+        0 disables 802.11e (default); 1 enables it.
+

 \end{itemize}
 
 \paragraph{Mesh Point}
 \end{itemize}
 
 \paragraph{Mesh Point}