---- linux-atm-2.4.1.orig/Makefile.in
-+++ linux-atm-2.4.1/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -100,14 +100,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -225,7 +225,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -274,6 +274,11 @@
- -rm -rf $(distdir)
- mkdir $(distdir)
- -chmod 777 $(distdir)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/aclocal.m4
-+++ linux-atm-2.4.1/aclocal.m4
-@@ -1,4 +1,4 @@
--dnl aclocal.m4 generated automatically by aclocal 1.4-p5
-+dnl aclocal.m4 generated automatically by aclocal 1.4-p6
-
- dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- dnl This file is free software; the Free Software Foundation
-@@ -43,7 +43,8 @@
- dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
- AC_DEFUN([AM_INIT_AUTOMAKE],
--[AC_REQUIRE([AC_PROG_INSTALL])
-+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-+AC_REQUIRE([AC_PROG_INSTALL])
- PACKAGE=[$1]
- AC_SUBST(PACKAGE)
- VERSION=[$2]
-@@ -59,13 +60,42 @@
- AC_REQUIRE([AC_ARG_PROGRAM])
- dnl FIXME This is truly gross.
- missing_dir=`cd $ac_aux_dir && pwd`
--AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
- AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
--AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
- AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
- AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
- AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-+# Copyright 2002 Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+
-+# AM_AUTOMAKE_VERSION(VERSION)
-+# ----------------------------
-+# Automake X.Y traces this macro to ensure aclocal.m4 has been
-+# generated from the m4 files accompanying Automake X.Y.
-+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
-+
-+# AM_SET_CURRENT_AUTOMAKE_VERSION
-+# -------------------------------
-+# Call AM_AUTOMAKE_VERSION so it can be traced.
-+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-+ [AM_AUTOMAKE_VERSION([1.4-p6])])
-+
- #
- # Check to make sure that the build environment is sane.
- #
-@@ -130,13 +160,14 @@
- dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
- AC_DEFUN([AM_PROG_LEX],
- [missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1)
--AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
-+AC_CHECK_PROGS(LEX, flex lex, $missing_dir/missing flex)
- AC_PROG_LEX
- AC_DECL_YYTEXT])
-
- # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
-
- # serial 46 AC_PROG_LIBTOOL
-+
- AC_DEFUN([AC_PROG_LIBTOOL],
- [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-@@ -162,6 +193,8 @@
- AC_REQUIRE([AC_PROG_LD])dnl
- AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
- AC_REQUIRE([AC_PROG_NM])dnl
-+AC_REQUIRE([LT_AC_PROG_SED])dnl
-+
- AC_REQUIRE([AC_PROG_LN_S])dnl
- AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
- AC_REQUIRE([AC_OBJEXT])dnl
-@@ -262,9 +295,30 @@
-
- ])
-
-+# AC_LIBTOOL_HEADER_ASSERT
-+# ------------------------
-+AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
-+[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
-+ [lt_cv_func_assert_works],
-+ [case $host in
-+ *-*-solaris*)
-+ if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
-+ case `$CC --version 2>/dev/null` in
-+ [[12]].*) lt_cv_func_assert_works=no ;;
-+ *) lt_cv_func_assert_works=yes ;;
-+ esac
-+ fi
-+ ;;
-+ esac])
-+
-+if test "x$lt_cv_func_assert_works" = xyes; then
-+ AC_CHECK_HEADERS(assert.h)
-+fi
-+])# AC_LIBTOOL_HEADER_ASSERT
-+
- # _LT_AC_CHECK_DLFCN
- # --------------------
--AC_DEFUN(_LT_AC_CHECK_DLFCN,
-+AC_DEFUN([_LT_AC_CHECK_DLFCN],
- [AC_CHECK_HEADERS(dlfcn.h)
- ])# _LT_AC_CHECK_DLFCN
-
-@@ -282,10 +336,10 @@
- # [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
- # Character class describing NM global symbol codes.
--[symcode='[BCDEGRST]']
-+symcode='[[BCDEGRST]]'
-
- # Regexp to match symbols that can be accessed directly from C.
--[sympat='\([_A-Za-z][_A-Za-z0-9]*\)']
-+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
- # Transform the above into a raw symbol and a C symbol.
- symxfrm='\1 \2\3 \3'
-@@ -293,25 +347,32 @@
- # Transform an extracted symbol line into a proper C declaration
- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
- # Define system-specific variables.
- case $host_os in
- aix*)
-- [symcode='[BCDT]']
-+ symcode='[[BCDT]]'
- ;;
- cygwin* | mingw* | pw32*)
-- [symcode='[ABCDGISTW]']
-+ symcode='[[ABCDGISTW]]'
- ;;
- hpux*) # Its linker distinguishes data from code symbols
- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[[BCDEGRST]]'
- ;;
--irix*)
-- [symcode='[BCDEGRST]']
-+osf*)
-+ symcode='[[BCDEGQRST]]'
- ;;
- solaris* | sysv5*)
-- [symcode='[BDT]']
-+ symcode='[[BDT]]'
- ;;
- sysv4)
-- [symcode='[DFNSTU]']
-+ symcode='[[DFNSTU]]'
- ;;
- esac
-
-@@ -325,14 +386,14 @@
-
- # If we're using GNU nm, then use its standard symbol codes.
- if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-- [symcode='[ABCDGISTW]']
-+ symcode='[[ABCDGISTW]]'
- fi
-
- # Try without a prefix undercore, then with it.
- for ac_symprfx in "" "_"; do
-
- # Write the raw and C identifiers.
--[lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"]
-+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-@@ -374,23 +435,23 @@
-
- cat <<EOF >> conftest.$ac_ext
- #if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
-+# define lt_ptr void *
- #else
--# define lt_ptr_t char *
-+# define lt_ptr char *
- # define const
- #endif
-
- /* The mapping between symbol names and symbols. */
- const struct {
- const char *name;
-- lt_ptr_t address;
-+ lt_ptr address;
- }
--[lt_preloaded_symbols[] =]
-+lt_preloaded_symbols[[]] =
- {
- EOF
-- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
-+ sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
-+ {0, (lt_ptr) 0}
- };
-
- #ifdef __cplusplus
-@@ -403,7 +464,7 @@
- save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
-- if AC_TRY_EVAL(ac_link) && test -s conftest; then
-+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
- pipe_works=yes
- fi
- LIBS="$save_LIBS"
-@@ -434,10 +495,13 @@
- global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
- if test -z "$lt_cv_sys_global_symbol_pipe"; then
- global_symbol_to_cdecl=
-+ global_symbol_to_c_name_address=
- else
- global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-+ global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
- fi
--if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
-+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-+then
- AC_MSG_RESULT(failed)
- else
- AC_MSG_RESULT(ok)
-@@ -455,16 +519,17 @@
- *-DOS) lt_cv_sys_path_separator=';' ;;
- *) lt_cv_sys_path_separator=':' ;;
- esac
-+ PATH_SEPARATOR=$lt_cv_sys_path_separator
- fi
- ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
- # _LT_AC_PROG_ECHO_BACKSLASH
- # --------------------------
- # Add some code to the start of the generated configure script which
--# will find an echo command which doesn;t interpret backslashes.
-+# will find an echo command which doesn't interpret backslashes.
- AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
- [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
-+ [AC_DIVERT_PUSH(NOTICE)])
- _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
- # Check that we are running under the correct shell.
-@@ -530,7 +595,7 @@
- #
- # So, first we look for a working echo in the user's PATH.
-
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-@@ -619,7 +684,7 @@
- # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
- # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
- # ------------------------------------------------------------------
--AC_DEFUN(_LT_AC_TRY_DLOPEN_SELF,
-+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
- [if test "$cross_compiling" = yes; then :
- [$4]
- else
-@@ -706,7 +771,7 @@
-
- # AC_LIBTOOL_DLOPEN_SELF
- # -------------------
--AC_DEFUN(AC_LIBTOOL_DLOPEN_SELF,
-+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
- [if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
-@@ -728,16 +793,22 @@
- ;;
-
- *)
-- AC_CHECK_LIB(dl, dlopen, [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen",
-- [AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load",
-- [AC_CHECK_LIB(svld, dlopen,
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB(dld, shl_load,
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-+ AC_CHECK_FUNC([shl_load],
-+ [lt_cv_dlopen="shl_load"],
-+ [AC_CHECK_LIB([dld], [shl_load],
-+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-+ [AC_CHECK_FUNC([dlopen],
-+ [lt_cv_dlopen="dlopen"],
-+ [AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-+ [AC_CHECK_LIB([svld], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-+ [AC_CHECK_LIB([dld], [dld_link],
-+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-+ ])
- ])
-- ])
-- ])
-+ ])
-+ ])
- ])
- ;;
- esac
-@@ -800,10 +871,10 @@
- # Sed substitution that helps us do robust quoting. It backslashifies
- # metacharacters that are still active within double-quoted strings.
- Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-+sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
-
- # Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-+double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
-
- # Sed substitution to delay expansion of an escaped shell variable in a
- # double_quote_subst'ed string.
-@@ -872,8 +943,15 @@
- old_postuninstall_cmds=
-
- if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-+ ;;
-+ *)
-+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-+ ;;
-+ esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
- fi
-
- # Allow CC to be a program name with arguments.
-@@ -893,7 +971,7 @@
- AC_MSG_RESULT($objdir)
-
-
--AC_ARG_WITH(pic,
-+AC_ARG_WITH(pic,
- [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
- pic_mode="$withval", pic_mode=default)
- test -z "$pic_mode" && pic_mode=default
-@@ -921,7 +999,7 @@
- # libC (AIX C++ library), which obviously doesn't included in libraries
- # list by gcc. This cause undefined symbols with -static flags.
- # This hack allows C programs to be linked with "-static -ldl", but
-- # we not sure about C++ programs.
-+ # not sure about C++ programs.
- lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
- ;;
- amigaos*)
-@@ -930,7 +1008,7 @@
- # like `-m68040'.
- lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
-- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- darwin* | rhapsody*)
-@@ -956,13 +1034,13 @@
- # PORTME Check for PIC flags for the system compiler.
- case $host_os in
- aix3* | aix4* | aix5*)
-+ lt_cv_prog_cc_wl='-Wl,'
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- lt_cv_prog_cc_static='-Bstatic'
-- lt_cv_prog_cc_wl='-Wl,'
-+ # AIX 5 now supports IA64 processor
-+ lt_cv_prog_cc_static='-Bstatic'
- else
-- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-+ lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
-
-@@ -973,7 +1051,7 @@
- lt_cv_prog_cc_pic='+Z'
- ;;
-
-- irix5* | irix6*)
-+ irix5* | irix6* | nonstopux*)
- lt_cv_prog_cc_wl='-Wl,'
- lt_cv_prog_cc_static='-non_shared'
- # PIC (with -KPIC) is the default.
-@@ -1017,11 +1095,7 @@
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- lt_cv_prog_cc_pic='-KPIC'
- lt_cv_prog_cc_static='-Bstatic'
-- if test "x$host_vendor" = xsni; then
-- lt_cv_prog_cc_wl='-LD'
-- else
-- lt_cv_prog_cc_wl='-Wl,'
-- fi
-+ lt_cv_prog_cc_wl='-Wl,'
- ;;
-
- uts4*)
-@@ -1087,7 +1161,7 @@
- # Check for any special shared library compilation flags.
- if test -n "$lt_cv_prog_cc_shlib"; then
- AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | [egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]"] >/dev/null; then :
-+ if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then :
- else
- AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
- lt_cv_prog_cc_can_build_shared=no
-@@ -1163,6 +1237,8 @@
- lt_cv_compiler_o_lo=no
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -c -o conftest.lo"
-+ save_objext="$ac_objext"
-+ ac_objext=lo
- AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
-@@ -1172,6 +1248,7 @@
- lt_cv_compiler_o_lo=yes
- fi
- ])
-+ ac_objext="$save_objext"
- CFLAGS="$save_CFLAGS"
- ])
- compiler_o_lo=$lt_cv_compiler_o_lo
-@@ -1268,7 +1345,7 @@
- extract_expsyms_cmds=
-
- case $host_os in
--cygwin* | mingw* | pw32* )
-+cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
-@@ -1276,7 +1353,9 @@
- with_gnu_ld=no
- fi
- ;;
--
-+openbsd*)
-+ with_gnu_ld=no
-+ ;;
- esac
-
- ld_shlibs=yes
-@@ -1363,7 +1442,7 @@
- # can override, but on older systems we have to supply one (in ltdll.c)
- if test "x$lt_cv_need_dllmain" = "xyes"; then
- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
-+ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
- else
- ltdll_obj=
-@@ -1376,24 +1455,25 @@
- # Be careful not to strip the DATA tag left be newer dlltools.
- export_symbols_cmds="$ltdll_cmds"'
- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-- [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols'
-+ sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is.
- # If DATA tags from a recent dlltool are present, honour them!
-- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname-def;
-+ archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname-def;
- else
-- echo EXPORTS > $output_objdir/$soname-def;
-- _lt_hint=1;
-- cat $export_symbols | while read symbol; do
-- set dummy \$symbol;
-- case \[$]# in
-- 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-- *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-- esac;
-- _lt_hint=`expr 1 + \$_lt_hint`;
-- done;
-+ echo EXPORTS > $output_objdir/$soname-def;
-+ _lt_hint=1;
-+ cat $export_symbols | while read symbol; do
-+ set dummy \$symbol;
-+ case \[$]# in
-+ 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-+ 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
-+ *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-+ esac;
-+ _lt_hint=`expr 1 + \$_lt_hint`;
-+ done;
- fi~
- '"$ltdll_cmds"'
- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-@@ -1488,80 +1568,98 @@
- ;;
-
- aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-+ hardcode_direct=yes
- archive_cmds=''
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- hardcode_direct=yes
-- else
-- # We have old collect2
-- hardcode_direct=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- hardcode_minus_L=yes
-- hardcode_libdir_flag_spec='-L$libdir'
-- hardcode_libdir_separator=
-- fi
-+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ esac
-+
- shared_flag='-shared'
- else
-+ # not using gcc
- if test "$host_cpu" = ia64; then
-- shared_flag='-G'
-+ shared_flag='${wl}-G'
- else
-- shared_flag='${wl}-bM:SRE'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
- fi
-- hardcode_direct=yes
- fi
-
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # Test if we are trying to use run time linking, or normal AIX style linking.
-- # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
-- aix_use_runtimelinking=no
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
- # It seems that -bexpall can do strange things, so it is better to
- # generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='-berok'
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-- allow_undefined_flag=' -Wl,-G'
-- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
-- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-- allow_undefined_flag="-znodefs"
-- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag="-z nodefs"
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
- else
-- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-- # Warning - without using the other run time loading flags, -berok will
-- # link without error, but may produce a broken library.
-- allow_undefined_flag='${wl}-berok'
-- # This is a bit strange, but is similar to how AIX traditionally builds
-- # it's shared libraries.
-- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
-+ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='${wl}-berok'
-+ # This is a bit strange, but is similar to how AIX traditionally builds
-+ # it's shared libraries.
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-@@ -1593,11 +1691,19 @@
- ;;
-
- darwin* | rhapsody*)
-- allow_undefined_flag='-undefined suppress'
-+ case "$host_os" in
-+ rhapsody* | darwin1.[[012]])
-+ allow_undefined_flag='-undefined suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ allow_undefined_flag='-flat_namespace -undefined suppress'
-+ ;;
-+ esac
- # FIXME: Relying on posixy $() will cause problems for
- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
-+ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-+ # `"' quotes if we put them in here... so don't!
-+ archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
- # We need to add '_' to the symbols in $export_symbols first
- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
- hardcode_direct=yes
-@@ -1649,13 +1755,14 @@
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
-- irix5* | irix6*)
-+ irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='-rpath $libdir'
- fi
-- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-@@ -1672,7 +1779,7 @@
- ;;
-
- newsos6)
-- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
-@@ -1680,10 +1787,24 @@
- ;;
-
- openbsd*)
-- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ else
-+ case "$host_os" in
-+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
- ;;
-
- os2*)
-@@ -1728,10 +1849,39 @@
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
-+ export_dynamic_flag_spec='${wl}-Bexport'
- ;;
-
- solaris*)
-+ # gcc --version < 3.0 without binutils cannot create self contained
-+ # shared libraries reliably, requiring libgcc.a to resolve some of
-+ # the object symbols generated in some cases. Libraries that use
-+ # assert need libgcc.a to resolve __eprintf, for example. Linking
-+ # a copy of libgcc.a into every shared library to guarantee resolving
-+ # such symbols causes other problems: According to Tim Van Holder
-+ # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-+ # (to the application) exception stack for one thing.
- no_undefined_flag=' -z defs'
-+ if test "$GCC" = yes; then
-+ case `$CC --version 2>/dev/null` in
-+ [[12]].*)
-+ cat <<EOF 1>&2
-+
-+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-+*** create self contained shared libraries on Solaris systems, without
-+*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
-+*** -no-undefined support, which will at least allow you to build shared
-+*** libraries. However, you may find that when you link such libraries
-+*** into an application without using GCC, you have to manually add
-+*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
-+*** upgrade to a newer version of GCC. Another option is to rebuild your
-+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-+
-+EOF
-+ no_undefined_flag=
-+ ;;
-+ esac
-+ fi
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-@@ -1740,7 +1890,7 @@
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
-- [solaris2.[0-5] | solaris2.[0-5].*]) ;;
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- esac
-@@ -1762,13 +1912,23 @@
- ;;
-
- sysv4)
-- if test "x$host_vendor" = xsno; then
-- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
-- hardcode_direct=yes # is this really true???
-- else
-- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-- fi
-+ case $host_vendor in
-+ sni)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds='$CC -r -o $output$reload_objs'
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-@@ -1909,6 +2069,9 @@
-
- aix4* | aix5*)
- version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-@@ -1920,22 +2083,24 @@
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
-- [ aix4 | aix4.[01] | aix4.[01].*)]
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-+ aix4 | aix4.[[01]] | aix4.[[01]].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-+ # AIX (on Power*) has no versioning support, so currently we can
-+ # not hardcode correct soname into executable. Probably we can
-+ # add versioning support to collect2, so additional links can
-+ # be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
-- # lib<name>.a to let people know that these are not typical AIX shared libraries.
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
-@@ -1944,14 +2109,14 @@
- soname_spec='${libname}${release}.so$major'
- fi
- shlibpath_var=LIBPATH
-- deplibs_check_method=pass_all
- fi
-+ hardcode_into_libs=yes
- ;;
-
- amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
- ;;
-
- beos*)
-@@ -1982,7 +2147,7 @@
- case $GCC,$host_os in
- yes,cygwin*)
- library_names_spec='$libname.dll.a'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
-@@ -1992,14 +2157,14 @@
- $rm \$dlpath'
- ;;
- yes,mingw*)
-- library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-+ library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
- ;;
- yes,pw32*)
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
- ;;
- *)
-- library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib'
-+ library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
-@@ -2025,6 +2190,18 @@
- dynamic_linker=no
- ;;
-
-+freebsd*-gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU/FreeBSD ld.so'
-+ ;;
-+
- freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
- version_type=freebsd-$objformat
-@@ -2076,14 +2253,17 @@
- postinstall_cmds='chmod 555 $lib'
- ;;
-
--irix5* | irix6*)
-- version_type=irix
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *) version_type=irix ;;
-+ esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
- case $host_os in
-- irix5*)
-+ irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
-@@ -2157,9 +2337,19 @@
-
- openbsd*)
- version_type=sunos
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- need_version=no
-+ need_lib_prefix=no
-+ need_version=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case "$host_os" in
-+ openbsd2.[[89]] | openbsd2.[[89]].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
- fi
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-@@ -2177,11 +2367,13 @@
- osf3* | osf4* | osf5*)
- version_type=osf
- need_version=no
-- soname_spec='${libname}${release}.so'
-- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-+ need_lib_prefix=no
-+ soname_spec='${libname}${release}.so$major'
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ hardcode_into_libs=yes
- ;;
-
- sco3.2v5*)
-@@ -2224,6 +2416,12 @@
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
-@@ -2270,6 +2468,33 @@
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case "$host_os" in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix4*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-@@ -2351,7 +2576,7 @@
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS \
-+ for var in echo old_CC old_CFLAGS SED \
- AR AR_FLAGS CC LD LN_S NM SHELL \
- reload_flag reload_cmds wl \
- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-@@ -2363,6 +2588,7 @@
- old_striplib striplib file_magic_cmd export_symbols_cmds \
- deplibs_check_method allow_undefined_flag no_undefined_flag \
- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-+ global_symbol_to_c_name_address \
- hardcode_libdir_flag_spec hardcode_libdir_separator \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-@@ -2412,8 +2638,11 @@
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
-+# A sed that does not truncate output.
-+SED=$lt_SED
-+
- # Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="sed -e s/^X//"
-+Xsed="${SED} -e s/^X//"
-
- # The HP-UX ksh and POSIX shell print the target directory to stdout
- # if CDPATH is set.
-@@ -2429,12 +2658,12 @@
- # Whether or not to build shared libraries.
- build_libtool_libs=$enable_shared
-
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$need_lc
--
- # Whether or not to build static libraries.
- build_old_libs=$enable_static
-
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$need_lc
-+
- # Whether or not to optimize for fast installation.
- fast_install=$enable_fast_install
-
-@@ -2600,6 +2829,9 @@
- # Transform the output of nm in a proper C declaration
- global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
-
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
-+
- # This is the shared library runtime path variable.
- runpath_var=$runpath_var
-
-@@ -2722,9 +2954,9 @@
- # return TRUE;
- # }
- # /* ltdll.c ends here */
-- # This is a source program that is used to create import libraries
-- # on Windows for dlls which lack them. Don't remove nor modify the
-- # starting and closing comments
-+ # This is a source program that is used to create import libraries
-+ # on Windows for dlls which lack them. Don't remove nor modify the
-+ # starting and closing comments
- # /* impgen.c starts here */
- # /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
- #
-@@ -3079,6 +3311,7 @@
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_CANONICAL_HOST])dnl
- AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
- ac_prog=ld
- if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
-@@ -3092,8 +3325,8 @@
- esac
- case $ac_prog in
- # Accept absolute paths.
-- [[\\/]* | [A-Za-z]:[\\/]*)]
-- [re_direlt='/[^/][^/]*/\.\./']
-+ [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
-+ re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-@@ -3117,7 +3350,7 @@
- fi
- AC_CACHE_VAL(lt_cv_path_LD,
- [if test -z "$LD"; then
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-@@ -3170,7 +3403,7 @@
- # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
- # -- PORTME fill in with the dynamic library characteristics
- AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependant libraries],
-+[AC_CACHE_CHECK([how to recognise dependent libraries],
- lt_cv_deplibs_check_method,
- [lt_cv_file_magic_cmd='$MAGIC_CMD'
- lt_cv_file_magic_test_file=
-@@ -3181,7 +3414,7 @@
- # `unknown' -- same as none, but documents that we really don't know.
- # 'pass_all' -- all dependencies passed with no checks.
- # 'test_compile' -- check by making test program.
--# ['file_magic [regex]'] -- check by looking for files in library path
-+# 'file_magic [[regex]]' -- check by looking for files in library path
- # which responds to the $file_magic_cmd with a given egrep regex.
- # If you have `file' or equivalent on your system and you're not sure
- # whether `pass_all' will *always* work, you probably want this one.
-@@ -3196,7 +3429,7 @@
- ;;
-
- bsdi4*)
-- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-@@ -3210,7 +3443,7 @@
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
-- rhapsody* | darwin1.[012])
-+ rhapsody* | darwin1.[[012]])
- lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
- ;;
- *) # Darwin 1.3 on
-@@ -3225,7 +3458,7 @@
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
-- [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
-@@ -3240,14 +3473,14 @@
- ;;
-
- hpux10.20*|hpux11*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
-
--irix5* | irix6*)
-+irix5* | irix6* | nonstopux*)
- case $host_os in
-- irix5*)
-+ irix5* | nonstopux*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
-@@ -3259,7 +3492,7 @@
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
-- [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
-+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-@@ -3269,29 +3502,39 @@
- # This must be Linux ELF.
- linux-gnu*)
- case $host_cpu in
-- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
-+ alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k)
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
-- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;]
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
- else
-- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
- fi
- ;;
-
- newos6*)
-- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-+openbsd*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-+ else
-+ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-+ fi
-+ ;;
-+
- osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-@@ -3308,14 +3551,14 @@
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
--[sysv5uw[78]* | sysv4*uw2*)]
-+sysv5uw[[78]]* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- motorola)
-- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
-@@ -3323,13 +3566,16 @@
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
-- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )']
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
-- [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"]
-+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
- esac
- ;;
- esac
-@@ -3341,13 +3587,14 @@
-
- # AC_PROG_NM - find the path to a BSD-compatible name lister
- AC_DEFUN([AC_PROG_NM],
--[AC_MSG_CHECKING([for BSD-compatible nm])
-+[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-+AC_MSG_CHECKING([for BSD-compatible nm])
- AC_CACHE_VAL(lt_cv_path_NM,
- [if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
-@@ -3394,12 +3641,12 @@
- ])
-
- # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl convenience library and INCLTDL to the include flags for
-+# the libltdl convenience library and LTDLINCL to the include flags for
- # the libltdl header and adds --enable-ltdl-convenience to the
--# configure arguments. Note that LIBLTDL and INCLTDL are not
-+# configure arguments. Note that LIBLTDL and LTDLINCL are not
- # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
- # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
--# with '${top_builddir}/' and INCLTDL will be prefixed with
-+# with '${top_builddir}/' and LTDLINCL will be prefixed with
- # '${top_srcdir}/' (note the single quotes!). If your package is not
- # flat and you're not using automake, define top_builddir and
- # top_srcdir appropriately in the Makefiles.
-@@ -3411,16 +3658,18 @@
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
- ])
-
- # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl installable library and INCLTDL to the include flags for
-+# the libltdl installable library and LTDLINCL to the include flags for
- # the libltdl header and adds --enable-ltdl-install to the configure
--# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-+# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
- # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
- # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
- # with '${top_srcdir}/' (note the single quotes!). If your package is
- # not flat and you're not using automake, define top_builddir and
- # top_srcdir appropriately in the Makefiles.
-@@ -3438,12 +3687,14 @@
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
-- INCLTDL=
-+ LTDLINCL=
- fi
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
- ])
-
- # old names
-@@ -3458,3 +3709,92 @@
- # This is just to silence aclocal about the macro not being used
- ifelse([AC_DISABLE_FAST_INSTALL])
-
-+# NOTE: This macro has been submitted for inclusion into #
-+# GNU Autoconf as AC_PROG_SED. When it is available in #
-+# a released version of Autoconf we should remove this #
-+# macro and use it instead. #
-+# LT_AC_PROG_SED
-+# --------------
-+# Check for a fully-functional sed program, that truncates
-+# as few characters as possible. Prefer GNU sed if found.
-+AC_DEFUN([LT_AC_PROG_SED],
-+[AC_MSG_CHECKING([for a sed that does not truncate output])
-+AC_CACHE_VAL(lt_cv_path_SED,
-+[# Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_executable_p="test -f"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+
-+ # Create a temporary directory, and hook for its removal unless debugging.
-+$debug ||
-+{
-+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+
-+# Create a (secure) tmp directory for tmp files.
-+: ${TMPDIR=/tmp}
-+{
-+ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=$TMPDIR/sed$$-$RANDOM
-+ (umask 077 && mkdir $tmp)
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-+ { (exit 1); exit 1; }
-+}
-+ _max=0
-+ _count=0
-+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+ # along with /bin/sed that truncates output.
-+ for _sed in $_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f ${_sed} && break
-+ cat /dev/null > "$tmp/sed.in"
-+ _count=0
-+ echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
-+ # Check for GNU sed and select it if it is found.
-+ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-+ lt_cv_path_SED=${_sed}
-+ break
-+ fi
-+ while true; do
-+ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-+ mv "$tmp/sed.tmp" "$tmp/sed.in"
-+ cp "$tmp/sed.in" "$tmp/sed.nl"
-+ echo >>"$tmp/sed.nl"
-+ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-+ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-+ # 40000 chars as input seems more than enough
-+ test $_count -gt 10 && break
-+ _count=`expr $_count + 1`
-+ if test $_count -gt $_max; then
-+ _max=$_count
-+ lt_cv_path_SED=$_sed
-+ fi
-+ done
-+ done
-+ rm -rf "$tmp"
-+])
-+if test "X$SED" != "X"; then
-+ lt_cv_path_SED=$SED
-+else
-+ SED=$lt_cv_path_SED
-+fi
-+AC_MSG_RESULT([$SED])
-+])
-+
---- linux-atm-2.4.1.orig/config.guess
-+++ linux-atm-2.4.1/config.guess
-@@ -1,9 +1,9 @@
- #! /bin/sh
- # Attempt to guess a canonical system name.
--# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
--timestamp='2001-04-20'
-+timestamp='2003-05-19'
-
- # This file is free software; you can redistribute it and/or modify it
- # under the terms of the GNU General Public License as published by
-@@ -24,8 +24,9 @@
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
--# Written by Per Bothner <bothner@cygnus.com>.
--# Please send patches to <config-patches@gnu.org>.
-+# Originally written by Per Bothner <per@bothner.com>.
-+# Please send patches to <config-patches@gnu.org>. Submit a context
-+# diff and a properly formatted ChangeLog entry.
- #
- # This script attempts to guess a canonical system name similar to
- # config.sub. If it succeeds, it prints the system name on stdout, and
-@@ -52,7 +53,7 @@
- GNU config.guess ($timestamp)
-
- Originally written by Per Bothner.
--Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
-
- This is free software; see the source for copying conditions. There is NO
-@@ -87,33 +88,44 @@
- exit 1
- fi
-
-+trap 'exit 1' 1 2 15
-
--dummy=dummy-$$
--trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
-+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-+# compiler to aid in system detection is discouraged as it requires
-+# temporary files to be created and, as you can see below, it is a
-+# headache to deal with in a portable fashion.
-
--# CC_FOR_BUILD -- compiler used by this script.
- # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
- # use `HOST_CC' if defined, but it is deprecated.
-
-+# Portable tmp directory creation inspired by the Autoconf team.
-+
-+set_cc_for_build='
-+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-+: ${TMPDIR=/tmp} ;
-+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
-+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
-+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-+dummy=$tmp/dummy ;
-+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
- case $CC_FOR_BUILD,$HOST_CC,$CC in
-- ,,) echo "int dummy(){}" > $dummy.c
-- for c in cc gcc c89 ; do
-- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
-- if test $? = 0 ; then
-- CC_FOR_BUILD="$c"; break
-- fi
-- done
-- rm -f $dummy.c $dummy.o $dummy.rel
-+ ,,) echo "int x;" > $dummy.c ;
-+ for c in cc gcc c89 c99 ; do
-+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-+ CC_FOR_BUILD="$c"; break ;
-+ fi ;
-+ done ;
- if test x"$CC_FOR_BUILD" = x ; then
-- CC_FOR_BUILD=no_compiler_found
-+ CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
--esac
-+esac ;'
-
- # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
--# (ghazi@noc.rutgers.edu 8/24/94.)
-+# (ghazi@noc.rutgers.edu 1994-08-24)
- if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
- fi
-@@ -127,29 +139,31 @@
-
- case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
-- # Netbsd (nbsd) targets should (where applicable) match one or
-+ # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
-- # Determine the machine/vendor (is the vendor relevant).
-- case "${UNAME_MACHINE}" in
-- amiga) machine=m68k-unknown ;;
-- arm32) machine=arm-unknown ;;
-- atari*) machine=m68k-atari ;;
-- sun3*) machine=m68k-sun ;;
-- mac68k) machine=m68k-apple ;;
-- macppc) machine=powerpc-apple ;;
-- hp3[0-9][05]) machine=m68k-hp ;;
-- ibmrt|romp-ibm) machine=romp-ibm ;;
-- *) machine=${UNAME_MACHINE}-unknown ;;
-+ #
-+ # Note: NetBSD doesn't particularly care about the vendor
-+ # portion of the name. We always set it to "unknown".
-+ sysctl="sysctl -n hw.machine_arch"
-+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-+ case "${UNAME_MACHINE_ARCH}" in
-+ armeb) machine=armeb-unknown ;;
-+ arm*) machine=arm-unknown ;;
-+ sh3el) machine=shl-unknown ;;
-+ sh3eb) machine=sh-unknown ;;
-+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
-- case "${UNAME_MACHINE}" in
-- i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
-+ case "${UNAME_MACHINE_ARCH}" in
-+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-+ eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
-@@ -165,69 +179,107 @@
- ;;
- esac
- # The OS release
-- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-+ # Debian GNU/NetBSD machines have a different userland, and
-+ # thus, need a distinct triplet. However, they do not need
-+ # kernel version information, so it can be replaced with a
-+ # suitable tag, in the style of linux-gnu.
-+ case "${UNAME_VERSION}" in
-+ Debian*)
-+ release='-gnu'
-+ ;;
-+ *)
-+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-+ ;;
-+ esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
-+ amiga:OpenBSD:*:*)
-+ echo m68k-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ arc:OpenBSD:*:*)
-+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ hp300:OpenBSD:*:*)
-+ echo m68k-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ mac68k:OpenBSD:*:*)
-+ echo m68k-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ macppc:OpenBSD:*:*)
-+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ mvme68k:OpenBSD:*:*)
-+ echo m68k-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ mvme88k:OpenBSD:*:*)
-+ echo m88k-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ mvmeppc:OpenBSD:*:*)
-+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ pmax:OpenBSD:*:*)
-+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ sgi:OpenBSD:*:*)
-+ echo mipseb-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ sun3:OpenBSD:*:*)
-+ echo m68k-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ wgrisc:OpenBSD:*:*)
-+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
-+ *:OpenBSD:*:*)
-+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-+ exit 0 ;;
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
-+ # According to Compaq, /usr/sbin/psrinfo has been available on
-+ # OSF/1 and Tru64 systems produced since 1995. I hope that
-+ # covers most systems running today. This code pipes the CPU
-+ # types through head -n 1, so we only detect the type of CPU 0.
-+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-+ case "$ALPHA_CPU_TYPE" in
-+ "EV4 (21064)")
-+ UNAME_MACHINE="alpha" ;;
-+ "EV4.5 (21064)")
-+ UNAME_MACHINE="alpha" ;;
-+ "LCA4 (21066/21068)")
-+ UNAME_MACHINE="alpha" ;;
-+ "EV5 (21164)")
-+ UNAME_MACHINE="alphaev5" ;;
-+ "EV5.6 (21164A)")
-+ UNAME_MACHINE="alphaev56" ;;
-+ "EV5.6 (21164PC)")
-+ UNAME_MACHINE="alphapca56" ;;
-+ "EV5.7 (21164PC)")
-+ UNAME_MACHINE="alphapca57" ;;
-+ "EV6 (21264)")
-+ UNAME_MACHINE="alphaev6" ;;
-+ "EV6.7 (21264A)")
-+ UNAME_MACHINE="alphaev67" ;;
-+ "EV6.8CB (21264C)")
-+ UNAME_MACHINE="alphaev68" ;;
-+ "EV6.8AL (21264B)")
-+ UNAME_MACHINE="alphaev68" ;;
-+ "EV6.8CX (21264D)")
-+ UNAME_MACHINE="alphaev68" ;;
-+ "EV6.9A (21264/EV69A)")
-+ UNAME_MACHINE="alphaev69" ;;
-+ "EV7 (21364)")
-+ UNAME_MACHINE="alphaev7" ;;
-+ "EV7.9 (21364A)")
-+ UNAME_MACHINE="alphaev79" ;;
-+ esac
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
-- cat <<EOF >$dummy.s
-- .data
--\$Lformat:
-- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
--
-- .text
-- .globl main
-- .align 4
-- .ent main
--main:
-- .frame \$30,16,\$26,0
-- ldgp \$29,0(\$27)
-- .prologue 1
-- .long 0x47e03d80 # implver \$0
-- lda \$2,-1
-- .long 0x47e20c21 # amask \$2,\$1
-- lda \$16,\$Lformat
-- mov \$0,\$17
-- not \$1,\$18
-- jsr \$26,printf
-- ldgp \$29,0(\$26)
-- mov 0,\$16
-- jsr \$26,exit
-- .end main
--EOF
-- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-- if test "$?" = 0 ; then
-- case `./$dummy` in
-- 0-0)
-- UNAME_MACHINE="alpha"
-- ;;
-- 1-0)
-- UNAME_MACHINE="alphaev5"
-- ;;
-- 1-1)
-- UNAME_MACHINE="alphaev56"
-- ;;
-- 1-101)
-- UNAME_MACHINE="alphapca56"
-- ;;
-- 2-303)
-- UNAME_MACHINE="alphaev6"
-- ;;
-- 2-307)
-- UNAME_MACHINE="alphaev67"
-- ;;
-- esac
-- fi
-- rm -f $dummy.s $dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
-@@ -242,29 +294,11 @@
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
-- amiga:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
-- arc64:OpenBSD:*:*)
-- echo mips64el-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- arc:OpenBSD:*:*)
-- echo mipsel-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- hkmips:OpenBSD:*:*)
-- echo mips-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- pmax:OpenBSD:*:*)
-- echo mipsel-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- sgi:OpenBSD:*:*)
-- echo mips-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- wgrisc:OpenBSD:*:*)
-- echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+ *:[Mm]orph[Oo][Ss]:*:*)
-+ echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
-@@ -286,6 +320,10 @@
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
-+ DRS?6000:UNIX_SV:4.2*:7*)
-+ case `/usr/bin/uname -p` in
-+ sparc) echo sparc-icl-nx7 && exit 0 ;;
-+ esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
-@@ -314,7 +352,7 @@
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
-- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
-@@ -328,9 +366,6 @@
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
-- atari*:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
-@@ -357,18 +392,6 @@
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
-- sun3*:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mac68k:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mvme68k:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mvme88k:OpenBSD:*:*)
-- echo m88k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
-@@ -385,6 +408,7 @@
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
-+ eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #ifdef __cplusplus
- #include <stdio.h> /* for printf() prototype */
-@@ -406,15 +430,20 @@
- exit (-1);
- }
- EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy \
-- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-- && rm -f $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-+ $CC_FOR_BUILD -o $dummy $dummy.c \
-+ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-+ && exit 0
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
-+ Motorola:*:4.3:PL8-*)
-+ echo powerpc-harris-powermax
-+ exit 0 ;;
-+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-+ echo powerpc-harris-powermax
-+ exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
-@@ -475,6 +504,7 @@
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-+ eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
-@@ -486,8 +516,7 @@
- exit(0);
- }
- EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
-@@ -496,7 +525,7 @@
- fi
- exit 0 ;;
- *:AIX:*:[45])
-- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
-+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
-@@ -536,10 +565,8 @@
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
-- case "${HPUX_REV}" in
-- 11.[0-9][0-9])
-- if [ -x /usr/bin/getconf ]; then
-- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-+ if [ -x /usr/bin/getconf ]; then
-+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-@@ -548,12 +575,13 @@
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
-+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
-- fi ;;
-- esac
-- if [ "${HP_ARCH}" = "" ]; then
-- sed 's/^ //' << EOF >$dummy.c
-+ fi
-+ if [ "${HP_ARCH}" = "" ]; then
-+ eval $set_cc_for_build
-+ sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
-@@ -586,11 +614,21 @@
- exit (0);
- }
- EOF
-- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
-- rm -f $dummy.c $dummy
-- fi ;;
-+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-+ test -z "$HP_ARCH" && HP_ARCH=hppa
-+ fi ;;
- esac
-+ if [ ${HP_ARCH} = "hppa2.0w" ]
-+ then
-+ # avoid double evaluation of $set_cc_for_build
-+ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
-+ then
-+ HP_ARCH="hppa2.0w"
-+ else
-+ HP_ARCH="hppa64"
-+ fi
-+ fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
-@@ -598,6 +636,7 @@
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
-+ eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
-@@ -623,8 +662,7 @@
- exit (0);
- }
- EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-@@ -633,7 +671,7 @@
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
-- *9??*:MPE/iX:*:*)
-+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-@@ -652,9 +690,6 @@
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
-- hppa*:OpenBSD:*:*)
-- echo hppa-unknown-openbsd
-- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
-@@ -673,41 +708,33 @@
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
-- CRAY*X-MP:*:*:*)
-- echo xmp-cray-unicos
-- exit 0 ;;
- CRAY*Y-MP:*:*:*)
-- echo ymp-cray-unicos${UNAME_RELEASE}
-+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
-+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-+ -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
-- CRAY*T3D:*:*:*)
-- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
-- CRAY-2:*:*:*)
-- echo cray2-cray-unicos
-- exit 0 ;;
-+ *:UNICOS/mp:*:*)
-+ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+ exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
-- hp300:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
-@@ -717,11 +744,19 @@
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
-- *:FreeBSD:*:*)
-- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-- exit 0 ;;
-- *:OpenBSD:*:*)
-- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-+ *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
-+ # Determine whether the default compiler uses glibc.
-+ eval $set_cc_for_build
-+ sed 's/^ //' << EOF >$dummy.c
-+ #include <features.h>
-+ #if __GLIBC__ >= 2
-+ LIBC=gnu
-+ #else
-+ LIBC=
-+ #endif
-+EOF
-+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
-@@ -732,11 +767,17 @@
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
-+ x86:Interix*:3*)
-+ echo i586-pc-interix3
-+ exit 0 ;;
-+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-+ echo i${UNAME_MACHINE}-pc-mks
-+ exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
-- echo i386-pc-interix
-+ echo i586-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
-@@ -756,104 +797,71 @@
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
-+ cris:Linux:*:*)
-+ echo cris-axis-linux-gnu
-+ exit 0 ;;
- ia64:Linux:*:*)
-- echo ${UNAME_MACHINE}-unknown-linux
-+ echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
-- cat >$dummy.c <<EOF
--#ifdef __cplusplus
--#include <stdio.h> /* for printf() prototype */
--int main (int argc, char *argv[]) {
--#else
--int main (argc, argv) int argc; char *argv[]; {
--#endif
--#ifdef __MIPSEB__
-- printf ("%s-unknown-linux-gnu\n", argv[1]);
--#endif
--#ifdef __MIPSEL__
-- printf ("%sel-unknown-linux-gnu\n", argv[1]);
--#endif
-- return 0;
--}
-+ eval $set_cc_for_build
-+ sed 's/^ //' << EOF >$dummy.c
-+ #undef CPU
-+ #undef mips
-+ #undef mipsel
-+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-+ CPU=mipsel
-+ #else
-+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-+ CPU=mips
-+ #else
-+ CPU=
-+ #endif
-+ #endif
- EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
-- ppc:Linux:*:*)
-- # Determine Lib Version
-- cat >$dummy.c <<EOF
--#include <features.h>
--#if defined(__GLIBC__)
--extern char __libc_version[];
--extern char __libc_release[];
--#endif
--main(argc, argv)
-- int argc;
-- char *argv[];
--{
--#if defined(__GLIBC__)
-- printf("%s %s\n", __libc_version, __libc_release);
--#else
-- printf("unknown\n");
--#endif
-- return 0;
--}
-+ mips64:Linux:*:*)
-+ eval $set_cc_for_build
-+ sed 's/^ //' << EOF >$dummy.c
-+ #undef CPU
-+ #undef mips64
-+ #undef mips64el
-+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-+ CPU=mips64el
-+ #else
-+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-+ CPU=mips64
-+ #else
-+ CPU=
-+ #endif
-+ #endif
- EOF
-- LIBC=""
-- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
-- if test "$?" = 0 ; then
-- ./$dummy | grep 1\.99 > /dev/null
-- if test "$?" = 0 ; then LIBC="libc1" ; fi
-- fi
-- rm -f $dummy.c $dummy
-- echo powerpc-unknown-linux-gnu${LIBC}
-+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-+ ;;
-+ ppc:Linux:*:*)
-+ echo powerpc-unknown-linux-gnu
-+ exit 0 ;;
-+ ppc64:Linux:*:*)
-+ echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
-- cat <<EOF >$dummy.s
-- .data
-- \$Lformat:
-- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-- .text
-- .globl main
-- .align 4
-- .ent main
-- main:
-- .frame \$30,16,\$26,0
-- ldgp \$29,0(\$27)
-- .prologue 1
-- .long 0x47e03d80 # implver \$0
-- lda \$2,-1
-- .long 0x47e20c21 # amask \$2,\$1
-- lda \$16,\$Lformat
-- mov \$0,\$17
-- not \$1,\$18
-- jsr \$26,printf
-- ldgp \$29,0(\$26)
-- mov 0,\$16
-- jsr \$26,exit
-- .end main
--EOF
-- LIBC=""
-- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-- if test "$?" = 0 ; then
-- case `./$dummy` in
-- 0-0) UNAME_MACHINE="alpha" ;;
-- 1-0) UNAME_MACHINE="alphaev5" ;;
-- 1-1) UNAME_MACHINE="alphaev56" ;;
-- 1-101) UNAME_MACHINE="alphapca56" ;;
-- 2-303) UNAME_MACHINE="alphaev6" ;;
-- 2-307) UNAME_MACHINE="alphaev67" ;;
-- esac
-- objdump --private-headers $dummy | \
-- grep ld.so.1 > /dev/null
-- if test "$?" = 0 ; then
-- LIBC="libc1"
-- fi
-- fi
-- rm -f $dummy.s $dummy
-+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-+ EV5) UNAME_MACHINE=alphaev5 ;;
-+ EV56) UNAME_MACHINE=alphaev56 ;;
-+ PCA56) UNAME_MACHINE=alphapca56 ;;
-+ PCA57) UNAME_MACHINE=alphapca56 ;;
-+ EV6) UNAME_MACHINE=alphaev6 ;;
-+ EV67) UNAME_MACHINE=alphaev67 ;;
-+ EV68*) UNAME_MACHINE=alphaev68 ;;
-+ esac
-+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
-@@ -883,71 +891,59 @@
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
-- ld_supported_emulations=`cd /; ld --help 2>&1 \
-- | sed -ne '/supported emulations:/!d
-+ # Set LC_ALL=C to ensure ld outputs messages in English.
-+ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-+ | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
-- s/.*supported emulations: *//
-+ s/.*supported targets: *//
- s/ .*//
- p'`
-- case "$ld_supported_emulations" in
-- i*86linux)
-- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-- exit 0
-- ;;
-- elf_i*86)
-+ case "$ld_supported_targets" in
-+ elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
-- i*86coff)
-+ a.out-i386-linux)
-+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-+ exit 0 ;;
-+ coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-- exit 0
-- ;;
-- esac
-- # Either a pre-BFD a.out linker (linux-gnuoldld)
-- # or one that does not give us useful --help.
-- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-- # If ld does not provide *any* "supported emulations:"
-- # that means it is gnuoldld.
-- test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-- case "${UNAME_MACHINE}" in
-- i*86)
-- VENDOR=pc;
-- ;;
-- *)
-- VENDOR=unknown;
-- ;;
-+ exit 0 ;;
-+ "")
-+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
-+ # one that does not give us useful --help.
-+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-+ exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
-- cat >$dummy.c <<EOF
--#include <features.h>
--#ifdef __cplusplus
--#include <stdio.h> /* for printf() prototype */
-- int main (int argc, char *argv[]) {
--#else
-- int main (argc, argv) int argc; char *argv[]; {
--#endif
--#ifdef __ELF__
--# ifdef __GLIBC__
--# if __GLIBC__ >= 2
-- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
--# else
-- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
--# endif
--# else
-- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
--# endif
--#else
-- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
--#endif
-- return 0;
--}
-+ eval $set_cc_for_build
-+ sed 's/^ //' << EOF >$dummy.c
-+ #include <features.h>
-+ #ifdef __ELF__
-+ # ifdef __GLIBC__
-+ # if __GLIBC__ >= 2
-+ LIBC=gnu
-+ # else
-+ LIBC=gnulibc1
-+ # endif
-+ # else
-+ LIBC=gnulibc1
-+ # endif
-+ #else
-+ #ifdef __INTEL_COMPILER
-+ LIBC=gnu
-+ #else
-+ LIBC=gnuaout
-+ #endif
-+ #endif
- EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-+ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
--# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
--# are messed up and put the nodename in both sysname and nodename.
- i*86:DYNIX/ptx:4*:*)
-+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-+ # earlier versions are messed up and put the nodename in both
-+ # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
-@@ -958,6 +954,23 @@
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
-+ i*86:OS/2:*:*)
-+ # If we were able to find `uname', then EMX Unix compatibility
-+ # is probably installed.
-+ echo ${UNAME_MACHINE}-pc-os2-emx
-+ exit 0 ;;
-+ i*86:XTS-300:*:STOP)
-+ echo ${UNAME_MACHINE}-unknown-stop
-+ exit 0 ;;
-+ i*86:atheos:*:*)
-+ echo ${UNAME_MACHINE}-unknown-atheos
-+ exit 0 ;;
-+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-+ echo i386-unknown-lynxos${UNAME_RELEASE}
-+ exit 0 ;;
-+ i*86:*DOS:*:*)
-+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
-+ exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-@@ -966,36 +979,32 @@
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
-- i*86:*:5:7*)
-- # Fixed at (any) Pentium or better
-- UNAME_MACHINE=i586
-- if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
-- echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
-- else
-- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-- fi
-+ i*86:*:5:[78]*)
-+ case `/bin/uname -X | grep "^Machine"` in
-+ *486*) UNAME_MACHINE=i486 ;;
-+ *Pentium) UNAME_MACHINE=i586 ;;
-+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-+ esac
-+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
-- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
-+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
-- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
-+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
-- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
-+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
-- i*86:*DOS:*:*)
-- echo ${UNAME_MACHINE}-pc-msdosdjgpp
-- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
-@@ -1019,9 +1028,15 @@
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
-+ mc68k:UNIX:SYSTEM5:3.51m)
-+ echo m68k-convergent-sysv
-+ exit 0 ;;
-+ M680?0:D-NIX:5.3:*)
-+ echo m68k-diab-dnix
-+ exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
-+ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-@@ -1038,9 +1053,6 @@
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
-- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-- echo i386-unknown-lynxos${UNAME_RELEASE}
-- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
-@@ -1067,8 +1079,8 @@
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
-- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-- # says <Richard.M.Bartel@ccMail.Census.GOV>
-+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-+ # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
-@@ -1080,6 +1092,10 @@
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
-+ *:VOS:*:*)
-+ # From Paul.Green@stratus.com.
-+ echo hppa1.1-stratus-vos
-+ exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
-@@ -1108,6 +1124,9 @@
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
-+ SX-6:SUPER-UX:*:*)
-+ echo sx6-nec-superux${UNAME_RELEASE}
-+ exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
-@@ -1115,18 +1134,24 @@
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
-- echo `uname -p`-apple-darwin${UNAME_RELEASE}
-+ case `uname -p` in
-+ *86) UNAME_PROCESSOR=i686 ;;
-+ powerpc) UNAME_PROCESSOR=powerpc ;;
-+ esac
-+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
-- if test "${UNAME_MACHINE}" = "x86pc"; then
-+ UNAME_PROCESSOR=`uname -p`
-+ if test "$UNAME_PROCESSOR" = "x86"; then
-+ UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
-- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
-+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
-- NSR-[KW]:NONSTOP_KERNEL:*:*)
-+ NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
-@@ -1149,11 +1174,6 @@
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
-- i*86:OS/2:*:*)
-- # If we were able to find `uname', then EMX Unix compatibility
-- # is probably installed.
-- echo ${UNAME_MACHINE}-pc-os2-emx
-- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
-@@ -1177,6 +1197,7 @@
- #echo '(No uname command or uname output not recognized.)' 1>&2
- #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-+eval $set_cc_for_build
- cat >$dummy.c <<EOF
- #ifdef _SEQUENT_
- # include <sys/types.h>
-@@ -1291,8 +1312,7 @@
- }
- EOF
-
--$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
--rm -f $dummy.c $dummy
-+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
-
- # Apollos put the system type in the environment.
-
---- linux-atm-2.4.1.orig/config.h.in
-+++ linux-atm-2.4.1/config.h.in
-@@ -1,4 +1,4 @@
--/* config.h.in. Generated automatically from configure.in by autoheader. */
-+/* config.h.in. Generated automatically from configure.in by autoheader 2.13. */
- #ifndef _ATM_CONFIG_H
- #define _ATM_CONFIG_H
-
---- linux-atm-2.4.1.orig/config.sub
-+++ linux-atm-2.4.1/config.sub
-@@ -1,9 +1,9 @@
- #! /bin/sh
- # Configuration validation subroutine script.
--# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
--timestamp='2001-04-20'
-+timestamp='2003-05-09'
-
- # This file is (in principle) common to ALL GNU software.
- # The presence of a machine in this file suggests that SOME GNU software
-@@ -29,7 +29,8 @@
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
--# Please send patches to <config-patches@gnu.org>.
-+# Please send patches to <config-patches@gnu.org>. Submit a context
-+# diff and a properly formatted ChangeLog entry.
- #
- # Configuration subroutine to validate and canonicalize a configuration type.
- # Supply the specified configuration type as an argument.
-@@ -117,7 +118,7 @@
- # Here we must recognize all the valid KERNEL-OS combinations.
- maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
- case $maybe_os in
-- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*)
-+ nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
-@@ -157,6 +158,14 @@
- os=-vxworks
- basic_machine=$1
- ;;
-+ -chorusos*)
-+ os=-chorusos
-+ basic_machine=$1
-+ ;;
-+ -chorusrdb)
-+ os=-chorusrdb
-+ basic_machine=$1
-+ ;;
- -hiux*)
- os=-hiuxwe2
- ;;
-@@ -215,26 +224,48 @@
- case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
-- tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
-- | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
-- | pyramid | mn10200 | mn10300 | tron | a29k \
-- | 580 | i960 | h8300 \
-- | x86 | ppcbe | mipsbe | mipsle | shbe | shle \
-- | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
-- | hppa64 \
-- | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
-- | alphaev6[78] \
-- | we32k | ns16k | clipper | i370 | sh | sh[34] \
-- | powerpc | powerpcle \
-- | 1750a | dsp16xx | pdp10 | pdp11 \
-- | mips16 | mips64 | mipsel | mips64el \
-- | mips64orion | mips64orionel | mipstx39 | mipstx39el \
-- | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-- | mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \
-- | sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \
-- | v850 | c4x \
-- | thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \
-- | pj | pjl | h8500)
-+ 1750a | 580 \
-+ | a29k \
-+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-+ | clipper \
-+ | d10v | d30v | dlx | dsp16xx \
-+ | fr30 | frv \
-+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-+ | i370 | i860 | i960 | ia64 \
-+ | ip2k \
-+ | m32r | m68000 | m68k | m88k | mcore \
-+ | mips | mipsbe | mipseb | mipsel | mipsle \
-+ | mips16 \
-+ | mips64 | mips64el \
-+ | mips64vr | mips64vrel \
-+ | mips64orion | mips64orionel \
-+ | mips64vr4100 | mips64vr4100el \
-+ | mips64vr4300 | mips64vr4300el \
-+ | mips64vr5000 | mips64vr5000el \
-+ | mipsisa32 | mipsisa32el \
-+ | mipsisa32r2 | mipsisa32r2el \
-+ | mipsisa64 | mipsisa64el \
-+ | mipsisa64sb1 | mipsisa64sb1el \
-+ | mipsisa64sr71k | mipsisa64sr71kel \
-+ | mipstx39 | mipstx39el \
-+ | mn10200 | mn10300 \
-+ | msp430 \
-+ | ns16k | ns32k \
-+ | openrisc | or32 \
-+ | pdp10 | pdp11 | pj | pjl \
-+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-+ | pyramid \
-+ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
-+ | sh64 | sh64le \
-+ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
-+ | strongarm \
-+ | tahoe | thumb | tic80 | tron \
-+ | v850 | v850e \
-+ | we32k \
-+ | x86 | xscale | xstormy16 | xtensa \
-+ | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
-@@ -242,7 +273,7 @@
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
-- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65)
-+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
- # We use `pc' rather than `unknown'
-@@ -257,31 +288,60 @@
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
-- # FIXME: clean up the formatting here.
-- vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
-- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
-- | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
-- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-- | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
-- | xmp-* | ymp-* \
-- | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
-- | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
-- | hppa2.0n-* | hppa64-* \
-- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
-- | alphaev6[78]-* \
-- | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
-- | clipper-* | orion-* \
-- | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-- | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \
-- | mips16-* | mips64-* | mipsel-* \
-- | mips64el-* | mips64orion-* | mips64orionel-* \
-- | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-- | mipstx39-* | mipstx39el-* | mcore-* \
-- | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \
-- | [cjt]90-* \
-- | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-- | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \
-- | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*)
-+ 580-* \
-+ | a29k-* \
-+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
-+ | avr-* \
-+ | bs2000-* \
-+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-+ | clipper-* | cydra-* \
-+ | d10v-* | d30v-* | dlx-* \
-+ | elxsi-* \
-+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
-+ | h8300-* | h8500-* \
-+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-+ | i*86-* | i860-* | i960-* | ia64-* \
-+ | ip2k-* \
-+ | m32r-* \
-+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-+ | m88110-* | m88k-* | mcore-* \
-+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-+ | mips16-* \
-+ | mips64-* | mips64el-* \
-+ | mips64vr-* | mips64vrel-* \
-+ | mips64orion-* | mips64orionel-* \
-+ | mips64vr4100-* | mips64vr4100el-* \
-+ | mips64vr4300-* | mips64vr4300el-* \
-+ | mips64vr5000-* | mips64vr5000el-* \
-+ | mipsisa32-* | mipsisa32el-* \
-+ | mipsisa32r2-* | mipsisa32r2el-* \
-+ | mipsisa64-* | mipsisa64el-* \
-+ | mipsisa64sb1-* | mipsisa64sb1el-* \
-+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
-+ | mipstx39-* | mipstx39el-* \
-+ | msp430-* \
-+ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
-+ | orion-* \
-+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-+ | pyramid-* \
-+ | romp-* | rs6000-* \
-+ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
-+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-+ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-+ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
-+ | tahoe-* | thumb-* \
-+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-+ | tron-* \
-+ | v850-* | v850e-* | vax-* \
-+ | we32k-* \
-+ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-+ | xtensa-* \
-+ | ymp-* \
-+ | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
-@@ -313,6 +373,9 @@
- basic_machine=a29k-none
- os=-bsd
- ;;
-+ amd64)
-+ basic_machine=x86_64-pc
-+ ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
-@@ -344,6 +407,10 @@
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
-+ c90)
-+ basic_machine=c90-cray
-+ os=-unicos
-+ ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
-@@ -364,16 +431,8 @@
- basic_machine=c38-convex
- os=-bsd
- ;;
-- cray | ymp)
-- basic_machine=ymp-cray
-- os=-unicos
-- ;;
-- cray2)
-- basic_machine=cray2-cray
-- os=-unicos
-- ;;
-- [cjt]90)
-- basic_machine=${basic_machine}-cray
-+ cray | j90)
-+ basic_machine=j90-cray
- os=-unicos
- ;;
- crds | unos)
-@@ -388,6 +447,14 @@
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
-+ decsystem10* | dec10*)
-+ basic_machine=pdp10-dec
-+ os=-tops10
-+ ;;
-+ decsystem20* | dec20*)
-+ basic_machine=pdp10-dec
-+ os=-tops20
-+ ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
-@@ -568,14 +635,6 @@
- basic_machine=m68k-atari
- os=-mint
- ;;
-- mipsel*-linux*)
-- basic_machine=mipsel-unknown
-- os=-linux-gnu
-- ;;
-- mips*-linux*)
-- basic_machine=mips-unknown
-- os=-linux-gnu
-- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
-@@ -590,6 +649,10 @@
- basic_machine=m68k-rom68k
- os=-coff
- ;;
-+ morphos)
-+ basic_machine=powerpc-unknown
-+ os=-morphos
-+ ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
-@@ -662,6 +725,10 @@
- np1)
- basic_machine=np1-gould
- ;;
-+ nv1)
-+ basic_machine=nv1-cray
-+ os=-unicosmp
-+ ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
-@@ -669,6 +736,10 @@
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
-+ or32 | or32-*)
-+ basic_machine=or32-unknown
-+ os=-coff
-+ ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
-@@ -691,19 +762,19 @@
- pbb)
- basic_machine=m68k-tti
- ;;
-- pc532 | pc532-*)
-+ pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
-- pentium | p5 | k5 | k6 | nexgen)
-+ pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
-- pentiumpro | p6 | 6x86 | athlon)
-+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2)
- basic_machine=i686-pc
- ;;
-- pentium-* | p5-* | k5-* | k6-* | nexgen-*)
-+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
-@@ -718,15 +789,25 @@
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
-- ;;
-+ ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
-- ;;
-+ ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
-+ ppc64) basic_machine=powerpc64-unknown
-+ ;;
-+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-+ ;;
-+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-+ basic_machine=powerpc64le-unknown
-+ ;;
-+ ppc64le-* | powerpc64little-*)
-+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-+ ;;
- ps2)
- basic_machine=i386-ibm
- ;;
-@@ -744,10 +825,22 @@
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
-+ s390 | s390-*)
-+ basic_machine=s390-ibm
-+ ;;
-+ s390x | s390x-*)
-+ basic_machine=s390x-ibm
-+ ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
-+ sb1)
-+ basic_machine=mipsisa64sb1-unknown
-+ ;;
-+ sb1el)
-+ basic_machine=mipsisa64sb1el-unknown
-+ ;;
- sequent)
- basic_machine=i386-sequent
- ;;
-@@ -755,7 +848,7 @@
- basic_machine=sh-hitachi
- os=-hms
- ;;
-- sparclite-wrs)
-+ sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
-@@ -822,19 +915,39 @@
- os=-dynix
- ;;
- t3e)
-- basic_machine=t3e-cray
-+ basic_machine=alphaev5-cray
- os=-unicos
- ;;
-+ t90)
-+ basic_machine=t90-cray
-+ os=-unicos
-+ ;;
-+ tic4x | c4x*)
-+ basic_machine=tic4x-unknown
-+ os=-coff
-+ ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
-+ tic55x | c55x*)
-+ basic_machine=tic55x-unknown
-+ os=-coff
-+ ;;
-+ tic6x | c6x*)
-+ basic_machine=tic6x-unknown
-+ os=-coff
-+ ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
-+ toad1)
-+ basic_machine=pdp10-xkl
-+ os=-tops20
-+ ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
-@@ -859,8 +972,8 @@
- os=-vms
- ;;
- vpp*|vx|vx-*)
-- basic_machine=f301-fujitsu
-- ;;
-+ basic_machine=f301-fujitsu
-+ ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
-@@ -881,13 +994,13 @@
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
-- xmp)
-- basic_machine=xmp-cray
-- os=-unicos
-- ;;
-- xps | xps100)
-+ xps | xps100)
- basic_machine=xps100-honeywell
- ;;
-+ ymp)
-+ basic_machine=ymp-cray
-+ os=-unicos
-+ ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
-@@ -908,13 +1021,6 @@
- op60c)
- basic_machine=hppa1.1-oki
- ;;
-- mips)
-- if [ x$os = x-linux-gnu ]; then
-- basic_machine=mips-unknown
-- else
-- basic_machine=mips-mips
-- fi
-- ;;
- romp)
- basic_machine=romp-ibm
- ;;
-@@ -934,13 +1040,16 @@
- we32k)
- basic_machine=we32k-att
- ;;
-- sh3 | sh4)
-+ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
-+ sh64)
-+ basic_machine=sh64-unknown
-+ ;;
- sparc | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
-- cydra)
-+ cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
-@@ -955,10 +1064,6 @@
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
-- c4x*)
-- basic_machine=c4x-none
-- os=-coff
-- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
-@@ -1018,11 +1123,15 @@
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-+ | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
-+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
-+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-+ | -powermax* | -dnix*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
-@@ -1034,8 +1143,10 @@
- ;;
- esac
- ;;
-+ -nto-qnx*)
-+ ;;
- -nto*)
-- os=-nto-qnx
-+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
-@@ -1074,14 +1185,20 @@
- -acis*)
- os=-aos
- ;;
-+ -atheos*)
-+ os=-atheos
-+ ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
-+ -nova*)
-+ os=-rtmk-nova
-+ ;;
- -ns2 )
-- os=-nextstep2
-+ os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
-@@ -1120,8 +1237,14 @@
- -xenix)
- os=-xenix
- ;;
-- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-- os=-mint
-+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-+ os=-mint
-+ ;;
-+ -aros*)
-+ os=-aros
-+ ;;
-+ -kaos*)
-+ os=-kaos
- ;;
- -none)
- ;;
-@@ -1154,10 +1277,11 @@
- arm*-semi)
- os=-aout
- ;;
-+ # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
-- pdp11-*)
-+ pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
-@@ -1184,6 +1308,9 @@
- mips*-*)
- os=-elf
- ;;
-+ or32-*)
-+ os=-coff
-+ ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
-@@ -1247,19 +1374,19 @@
- *-next)
- os=-nextstep3
- ;;
-- *-gould)
-+ *-gould)
- os=-sysv
- ;;
-- *-highlevel)
-+ *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
-- *-sgi)
-+ *-sgi)
- os=-irix
- ;;
-- *-siemens)
-+ *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
-@@ -1331,7 +1458,7 @@
- -ptx*)
- vendor=sequent
- ;;
-- -vxsim* | -vxworks*)
-+ -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
-@@ -1346,6 +1473,9 @@
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
-+ -vos*)
-+ vendor=stratus
-+ ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
---- linux-atm-2.4.1.orig/configure
-+++ linux-atm-2.4.1/configure
-@@ -1,24 +1,244 @@
- #! /bin/sh
--
- # Guess values for system-dependent variables and create Makefiles.
--# Generated automatically using autoconf version 2.13
--# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-+# Generated by GNU Autoconf 2.57.
- #
-+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-+# Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+
-+# Support unset when possible.
-+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
-+ else
-+ as_ln_s='ln -s'
-+ fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-
--# Defaults:
--ac_help=
--ac_default_prefix=/usr/local
--# Any additions from configure.in:
--ac_help="$ac_help
-- --enable-shared[=PKGS] build shared libraries [default=yes]"
--ac_help="$ac_help
-- --enable-static[=PKGS] build static libraries [default=yes]"
--ac_help="$ac_help
-- --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
--ac_help="$ac_help
-- --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
-
- # Find the correct PATH separator. Usually this is `:', but
- # DJGPP uses `;' like DOS.
-@@ -28,6 +248,7 @@
- *-DOS) lt_cv_sys_path_separator=';' ;;
- *) lt_cv_sys_path_separator=':' ;;
- esac
-+ PATH_SEPARATOR=$lt_cv_sys_path_separator
- fi
-
-
-@@ -94,7 +315,7 @@
- #
- # So, first we look for a working echo in the user's PATH.
-
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-@@ -177,34 +398,86 @@
- fi
-
-
--ac_help="$ac_help
-- --disable-libtool-lock avoid locking (might break parallel builds)"
--ac_help="$ac_help
-- --with-pic try to use only PIC/non-PIC objects [default=use both]"
--ac_help="$ac_help
-- --with-uni=VERSION UNI version to use (3.0,3.1,4.0) [default=dynamic]"
--ac_help="$ac_help
-- --enable-allow_uni30 Allow UNI 3.0 backwards-compatible extensions (if using UNI 3.1)"
--ac_help="$ac_help
-- --enable-q2963_1 Enable peak cell rate modification as specified in Q.2963.1 (if using UNI 4.0)"
--ac_help="$ac_help
-- --enable-cisco Enable work around for point-to-multipoint signaling bug in Cisco LS100 or LS7010 switches"
--ac_help="$ac_help
-- --enable-thomflex Some versions of the Thomson Thomflex 5000 won't do any signaling before they get a RESTART. Enable sending of a RESTART whenever SAAL comes up."
--ac_help="$ac_help
-- --enable-mpoa_1_1 Enable proposed MPOA 1.1 features"
--ac_help="$ac_help
-- --enable-mpr Enable memory debugging (if MPR is installed)"
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+exec 6>&1
-+
-+#
-+# Initializations.
-+#
-+ac_default_prefix=/usr/local
-+ac_config_libobj_dir=.
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Maximum number of lines to put in a shell here document.
-+# This variable seems obsolete. It should probably be removed, and
-+# only ac_max_sed_lines should be used.
-+: ${ac_max_here_lines=38}
-+
-+# Identity of this package.
-+PACKAGE_NAME=
-+PACKAGE_TARNAME=
-+PACKAGE_VERSION=
-+PACKAGE_STRING=
-+PACKAGE_BUGREPORT=
-+
-+ac_unique_file="src/include/atm.h"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#if HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#if HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#if STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# if HAVE_STDLIB_H
-+# include <stdlib.h>
-+# endif
-+#endif
-+#if HAVE_STRING_H
-+# if !STDC_HEADERS && HAVE_MEMORY_H
-+# include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#if HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#if HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#else
-+# if HAVE_STDINT_H
-+# include <stdint.h>
-+# endif
-+#endif
-+#if HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE LIBVER_CURRENT LIBVER_REVISION LIBVER_AGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LEX LEXLIB LEX_OUTPUT_ROOT YACC LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL LIBTOOL_DEPS PERL LIBOBJS LTLIBOBJS'
-+ac_subst_files=''
-
- # Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
- # The variables have the same names as the options, with
- # dashes changed to underlines.
--build=NONE
--cache_file=./config.cache
-+cache_file=/dev/null
- exec_prefix=NONE
--host=NONE
- no_create=
--nonopt=NONE
- no_recursion=
- prefix=NONE
- program_prefix=NONE
-@@ -213,10 +486,15 @@
- silent=
- site=
- srcdir=
--target=NONE
- verbose=
- x_includes=NONE
- x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
-@@ -230,17 +508,9 @@
- infodir='${prefix}/info'
- mandir='${prefix}/man'
-
--# Initialize some other variables.
--subdirs=
--MFLAGS= MAKEFLAGS=
--SHELL=${CONFIG_SHELL-/bin/sh}
--# Maximum number of lines to put in a shell here document.
--ac_max_here_lines=12
--
- ac_prev=
- for ac_option
- do
--
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
-@@ -248,59 +518,59 @@
- continue
- fi
-
-- case "$ac_option" in
-- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-- *) ac_optarg= ;;
-- esac
-+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case "$ac_option" in
-+ case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-- bindir="$ac_optarg" ;;
-+ bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
-- ac_prev=build ;;
-+ ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-- build="$ac_optarg" ;;
-+ build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-- cache_file="$ac_optarg" ;;
-+ cache_file=$ac_optarg ;;
-+
-+ --config-cache | -C)
-+ cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
-- datadir="$ac_optarg" ;;
-+ datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- eval "enable_${ac_feature}=no" ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "enable_${ac_feature}='$ac_optarg'" ;;
-+ eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -309,95 +579,47 @@
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
-- exec_prefix="$ac_optarg" ;;
-+ exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
-- -help | --help | --hel | --he)
-- # Omit some internal or obsolete options to make the list less imposing.
-- # This message is too long to be a string in the A/UX 3.1 sh.
-- cat << EOF
--Usage: configure [options] [host]
--Options: [defaults in brackets after descriptions]
--Configuration:
-- --cache-file=FILE cache test results in FILE
-- --help print this message
-- --no-create do not create output files
-- --quiet, --silent do not print \`checking...' messages
-- --version print the version of autoconf that created configure
--Directory and file names:
-- --prefix=PREFIX install architecture-independent files in PREFIX
-- [$ac_default_prefix]
-- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-- [same as prefix]
-- --bindir=DIR user executables in DIR [EPREFIX/bin]
-- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
-- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data in DIR
-- [PREFIX/share]
-- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
-- --sharedstatedir=DIR modifiable architecture-independent data in DIR
-- [PREFIX/com]
-- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
-- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
-- --includedir=DIR C header files in DIR [PREFIX/include]
-- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
-- --infodir=DIR info documentation in DIR [PREFIX/info]
-- --mandir=DIR man documentation in DIR [PREFIX/man]
-- --srcdir=DIR find the sources in DIR [configure dir or ..]
-- --program-prefix=PREFIX prepend PREFIX to installed program names
-- --program-suffix=SUFFIX append SUFFIX to installed program names
-- --program-transform-name=PROGRAM
-- run sed PROGRAM on installed program names
--EOF
-- cat << EOF
--Host type:
-- --build=BUILD configure for building on BUILD [BUILD=HOST]
-- --host=HOST configure for HOST [guessed]
-- --target=TARGET configure for TARGET [TARGET=HOST]
--Features and packages:
-- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-- --x-includes=DIR X include files are in DIR
-- --x-libraries=DIR X library files are in DIR
--EOF
-- if test -n "$ac_help"; then
-- echo "--enable and --with options recognized:$ac_help"
-- fi
-- exit 0 ;;
-+ -help | --help | --hel | --he | -h)
-+ ac_init_help=long ;;
-+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+ ac_init_help=recursive ;;
-+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+ ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
-- ac_prev=host ;;
-+ ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
-- host="$ac_optarg" ;;
-+ host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
-- includedir="$ac_optarg" ;;
-+ includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-- infodir="$ac_optarg" ;;
-+ infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
-- libdir="$ac_optarg" ;;
-+ libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
-- libexecdir="$ac_optarg" ;;
-+ libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
-@@ -406,19 +628,19 @@
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-- localstatedir="$ac_optarg" ;;
-+ localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-- mandir="$ac_optarg" ;;
-+ mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c)
-+ | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-@@ -432,26 +654,26 @@
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-- oldincludedir="$ac_optarg" ;;
-+ oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-- prefix="$ac_optarg" ;;
-+ prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-- program_prefix="$ac_optarg" ;;
-+ program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-- program_suffix="$ac_optarg" ;;
-+ program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
-@@ -468,7 +690,7 @@
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
-- program_transform_name="$ac_optarg" ;;
-+ program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
-@@ -478,7 +700,7 @@
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
-- sbindir="$ac_optarg" ;;
-+ sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-@@ -489,58 +711,57 @@
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
-- sharedstatedir="$ac_optarg" ;;
-+ sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
-- site="$ac_optarg" ;;
-+ site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-- srcdir="$ac_optarg" ;;
-+ srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-- sysconfdir="$ac_optarg" ;;
-+ sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
-- ac_prev=target ;;
-+ ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-- target="$ac_optarg" ;;
-+ target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
-- -version | --version | --versio | --versi | --vers)
-- echo "configure generated by autoconf version 2.13"
-- exit 0 ;;
-+ -version | --version | --versio | --versi | --vers | -V)
-+ ac_init_version=: ;;
-
- -with-* | --with-*)
-- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "with_${ac_package}='$ac_optarg'" ;;
-+ eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
-- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- eval "with_${ac_package}=no" ;;
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/-/_/g'`
-+ eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -551,99 +772,110 @@
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-- x_includes="$ac_optarg" ;;
-+ x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-- x_libraries="$ac_optarg" ;;
-+ x_libraries=$ac_optarg ;;
-
-- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-+ -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; }
- ;;
-
-+ *=*)
-+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-+ eval "$ac_envvar='$ac_optarg'"
-+ export $ac_envvar ;;
-+
- *)
-- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-- echo "configure: warning: $ac_option: invalid host type" 1>&2
-- fi
-- if test "x$nonopt" != xNONE; then
-- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-- fi
-- nonopt="$ac_option"
-+ # FIXME: should be removed in autoconf 3.0.
-+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
- done
-
- if test -n "$ac_prev"; then
-- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
--fi
--
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
--# File descriptor usage:
--# 0 standard input
--# 1 file creation
--# 2 errors and warnings
--# 3 some systems may open it to /dev/tty
--# 4 used on the Kubota Titan
--# 6 checking for... messages and results
--# 5 compiler messages saved in config.log
--if test "$silent" = yes; then
-- exec 6>/dev/null
--else
-- exec 6>&1
-+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+ { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { (exit 1); exit 1; }; }
- fi
--exec 5>./config.log
-
--echo "\
--This file contains any messages produced by compilers while
--running configure, to aid debugging if configure makes a mistake.
--" 1>&5
-+# Be sure to have absolute paths.
-+for ac_var in exec_prefix prefix
-+do
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-
--# Strip out --no-create and --no-recursion so they do not pile up.
--# Also quote any args containing shell metacharacters.
--ac_configure_args=
--for ac_arg
-+# Be sure to have absolute paths.
-+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-+ localstatedir libdir includedir oldincludedir infodir mandir
- do
-- case "$ac_arg" in
-- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c) ;;
-- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
- esac
- done
-
--# NLS nuisances.
--# Only set these to C if already set. These must not be set unconditionally
--# because not all systems understand e.g. LANG=C (notably SCO).
--# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
--# Non-C LC_CTYPE values break the ctype check.
--if test "${LANG+set}" = set; then LANG=C; export LANG; fi
--if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
--if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
--if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+ if test "x$build_alias" = x; then
-+ cross_compiling=maybe
-+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used." >&2
-+ elif test "x$build_alias" != "x$host_alias"; then
-+ cross_compiling=yes
-+ fi
-+fi
-
--# confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo > confdefs.h
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-
--# A filename unique to this package, relative to the directory that
--# configure is in, which we can look for to find out if srcdir is correct.
--ac_unique_file=src/include/atm.h
-
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
-- ac_prog=$0
-- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-+ ac_confdir=`(dirname "$0") 2>/dev/null ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$0" : 'X\(//\)[^/]' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$0" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
-@@ -653,13 +885,453 @@
- fi
- if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-+ { (exit 1); exit 1; }; }
- else
-- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
- fi
- fi
--srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-+ { (exit 1); exit 1; }; }
-+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-+ac_env_build_alias_set=${build_alias+set}
-+ac_env_build_alias_value=$build_alias
-+ac_cv_env_build_alias_set=${build_alias+set}
-+ac_cv_env_build_alias_value=$build_alias
-+ac_env_host_alias_set=${host_alias+set}
-+ac_env_host_alias_value=$host_alias
-+ac_cv_env_host_alias_set=${host_alias+set}
-+ac_cv_env_host_alias_value=$host_alias
-+ac_env_target_alias_set=${target_alias+set}
-+ac_env_target_alias_value=$target_alias
-+ac_cv_env_target_alias_set=${target_alias+set}
-+ac_cv_env_target_alias_value=$target_alias
-+ac_env_CC_set=${CC+set}
-+ac_env_CC_value=$CC
-+ac_cv_env_CC_set=${CC+set}
-+ac_cv_env_CC_value=$CC
-+ac_env_CFLAGS_set=${CFLAGS+set}
-+ac_env_CFLAGS_value=$CFLAGS
-+ac_cv_env_CFLAGS_set=${CFLAGS+set}
-+ac_cv_env_CFLAGS_value=$CFLAGS
-+ac_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_env_LDFLAGS_value=$LDFLAGS
-+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_cv_env_LDFLAGS_value=$LDFLAGS
-+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_env_CPPFLAGS_value=$CPPFLAGS
-+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-+ac_env_CPP_set=${CPP+set}
-+ac_env_CPP_value=$CPP
-+ac_cv_env_CPP_set=${CPP+set}
-+ac_cv_env_CPP_value=$CPP
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+ # Omit some internal or obsolete options to make the list less imposing.
-+ # This message is too long to be a string in the A/UX 3.1 sh.
-+ cat <<_ACEOF
-+\`configure' configures this package to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE. See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+ -h, --help display this help and exit
-+ --help=short display options specific to this package
-+ --help=recursive display the short help of all the included packages
-+ -V, --version display version information and exit
-+ -q, --quiet, --silent do not print \`checking...' messages
-+ --cache-file=FILE cache test results in FILE [disabled]
-+ -C, --config-cache alias for \`--cache-file=config.cache'
-+ -n, --no-create do not create output files
-+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
-+
-+_ACEOF
-+
-+ cat <<_ACEOF
-+Installation directories:
-+ --prefix=PREFIX install architecture-independent files in PREFIX
-+ [$ac_default_prefix]
-+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-+ [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --infodir=DIR info documentation [PREFIX/info]
-+ --mandir=DIR man documentation [PREFIX/man]
-+_ACEOF
-+
-+ cat <<\_ACEOF
-+
-+Program names:
-+ --program-prefix=PREFIX prepend PREFIX to installed program names
-+ --program-suffix=SUFFIX append SUFFIX to installed program names
-+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-+
-+System types:
-+ --build=BUILD configure for building on BUILD [guessed]
-+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
-+ --target=TARGET configure for building compilers for TARGET [HOST]
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+
-+ cat <<\_ACEOF
-+
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --enable-shared=PKGS build shared libraries default=yes
-+ --enable-static=PKGS build static libraries default=yes
-+ --enable-fast-install=PKGS optimize for fast installation default=yes
-+ --disable-libtool-lock avoid locking (might break parallel builds)
-+ --enable-allow_uni30 Allow UNI 3.0 backwards-compatible extensions (if using UNI 3.1)
-+ --enable-q2963_1 Enable peak cell rate modification as specified in Q.2963.1 (if using UNI 4.0)
-+ --enable-cisco Enable work around for point-to-multipoint signaling bug in Cisco LS100 or LS7010 switches
-+ --enable-thomflex Some versions of the Thomson Thomflex 5000 won't do any signaling before they get a RESTART. Enable sending of a RESTART whenever SAAL comes up.
-+ --enable-mpoa_1_1 Enable proposed MPOA 1.1 features
-+ --enable-mpr Enable memory debugging (if MPR is installed)
-+
-+Optional Packages:
-+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-+ --with-gnu-ld assume the C compiler uses GNU ld default=no
-+ --with-pic try to use only PIC/non-PIC objects default=use both
-+ --with-uni=VERSION UNI version to use (3.0,3.1,4.0) default=dynamic
-+
-+Some influential environment variables:
-+ CC C compiler command
-+ CFLAGS C compiler flags
-+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
-+ nonstandard directory <lib dir>
-+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-+ headers in a nonstandard directory <include dir>
-+ CPP C preprocessor
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+_ACEOF
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+ # If there are subdirs, report their specific --help.
-+ ac_popdir=`pwd`
-+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+ test -d $ac_dir || continue
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-+# absolute.
-+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-+
-+ cd $ac_dir
-+ # Check for guested configure; otherwise get Cygnus style configure.
-+ if test -f $ac_srcdir/configure.gnu; then
-+ echo
-+ $SHELL $ac_srcdir/configure.gnu --help=recursive
-+ elif test -f $ac_srcdir/configure; then
-+ echo
-+ $SHELL $ac_srcdir/configure --help=recursive
-+ elif test -f $ac_srcdir/configure.ac ||
-+ test -f $ac_srcdir/configure.in; then
-+ echo
-+ $ac_configure --help
-+ else
-+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi
-+ cd $ac_popdir
-+ done
-+fi
-+
-+test -n "$ac_init_help" && exit 0
-+if $ac_init_version; then
-+ cat <<\_ACEOF
-+
-+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-+Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+ exit 0
-+fi
-+exec 5>config.log
-+cat >&5 <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by $as_me, which was
-+generated by GNU Autoconf 2.57. Invocation command line was
-+
-+ $ $0 $@
-+
-+_ACEOF
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ echo "PATH: $as_dir"
-+done
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+## ----------- ##
-+## Core tests. ##
-+## ----------- ##
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_sep=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+ for ac_arg
-+ do
-+ case $ac_arg in
-+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ continue ;;
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ case $ac_pass in
-+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 2)
-+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ if test $ac_must_keep_next = true; then
-+ ac_must_keep_next=false # Got value, back to normal.
-+ else
-+ case $ac_arg in
-+ *=* | --config-cache | -C | -disable-* | --disable-* \
-+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+ | -with-* | --with-* | -without-* | --without-* | --x)
-+ case "$ac_configure_args0 " in
-+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+ esac
-+ ;;
-+ -* ) ac_must_keep_next=true ;;
-+ esac
-+ fi
-+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-+ # Get rid of the leading space.
-+ ac_sep=" "
-+ ;;
-+ esac
-+ done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log. We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Be sure not to use single quotes in there, as some shells,
-+# such as our DU 5.0 friend, will then `close' the trap.
-+trap 'exit_status=$?
-+ # Save into config.log some information that might help in debugging.
-+ {
-+ echo
-+
-+ cat <<\_ASBOX
-+## ---------------- ##
-+## Cache variables. ##
-+## ---------------- ##
-+_ASBOX
-+ echo
-+ # The following way of writing the cache mishandles newlines in values,
-+{
-+ (set) 2>&1 |
-+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ sed -n \
-+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-+ ;;
-+ *)
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+}
-+ echo
-+
-+ cat <<\_ASBOX
-+## ----------------- ##
-+## Output variables. ##
-+## ----------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_vars
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+
-+ if test -n "$ac_subst_files"; then
-+ cat <<\_ASBOX
-+## ------------- ##
-+## Output files. ##
-+## ------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_files
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+ fi
-+
-+ if test -s confdefs.h; then
-+ cat <<\_ASBOX
-+## ----------- ##
-+## confdefs.h. ##
-+## ----------- ##
-+_ASBOX
-+ echo
-+ sed "/^$/d" confdefs.h | sort
-+ echo
-+ fi
-+ test "$ac_signal" != 0 &&
-+ echo "$as_me: caught signal $ac_signal"
-+ echo "$as_me: exit $exit_status"
-+ } >&5
-+ rm -f core *.core &&
-+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ exit $exit_status
-+ ' 0
-+for ac_signal in 1 2 13 15; do
-+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -rf conftest* confdefs.h
-+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-+echo >confdefs.h
-+
-+# Predefined preprocessor variables.
-
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
- # Prefer explicitly selected file to automatically selected ones.
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
-@@ -670,45 +1342,111 @@
- fi
- for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
-- echo "loading site script $ac_site_file"
-+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+ sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
- done
-
- if test -r "$cache_file"; then
-- echo "loading cache $cache_file"
-- . $cache_file
-+ # Some versions of bash will fail to source /dev/null (special
-+ # files actually), so we avoid doing that.
-+ if test -f "$cache_file"; then
-+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+ case $cache_file in
-+ [\\/]* | ?:[\\/]* ) . $cache_file;;
-+ *) . ./$cache_file;;
-+ esac
-+ fi
- else
-- echo "creating cache $cache_file"
-- > $cache_file
-+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+ >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in `(set) 2>&1 |
-+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+ eval ac_new_set=\$ac_env_${ac_var}_set
-+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-+ eval ac_new_val="\$ac_env_${ac_var}_value"
-+ case $ac_old_set,$ac_new_set in
-+ set,)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,set)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,);;
-+ *)
-+ if test "x$ac_old_val" != "x$ac_new_val"; then
-+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-+echo "$as_me: former value: $ac_old_val" >&2;}
-+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-+echo "$as_me: current value: $ac_new_val" >&2;}
-+ ac_cache_corrupted=:
-+ fi;;
-+ esac
-+ # Pass precious variables to config.status.
-+ if test "$ac_new_set" = set; then
-+ case $ac_new_val in
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *) ac_arg=$ac_var=$ac_new_val ;;
-+ esac
-+ case " $ac_configure_args " in
-+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ esac
-+ fi
-+done
-+if $ac_cache_corrupted; then
-+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--ac_exeext=
--ac_objext=o
--if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-- ac_n= ac_c='
--' ac_t=' '
-- else
-- ac_n=-n ac_c= ac_t=
-- fi
--else
-- ac_n= ac_c='\c' ac_t=
--fi
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-
-
-
-
-
-
-+
-+
-+
-+
-+ ac_config_headers="$ac_config_headers config.h"
-+
-+ ac_config_commands="$ac_config_commands default-1"
-+
-+
- ac_aux_dir=
- for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
-@@ -719,105 +1457,105 @@
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-+ elif test -f $ac_dir/shtool; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/shtool install -c"
-+ break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
--fi
--ac_config_guess=$ac_aux_dir/config.guess
--ac_config_sub=$ac_aux_dir/config.sub
--ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
--
--
--# Do some error checking and defaulting for the host and target type.
--# The inputs are:
--# configure --host=HOST --target=TARGET --build=BUILD NONOPT
--#
--# The rules are:
--# 1. You are not allowed to specify --host, --target, and nonopt at the
--# same time.
--# 2. Host defaults to nonopt.
--# 3. If nonopt is not specified, then host defaults to the current host,
--# as determined by config.guess.
--# 4. Target and build default to nonopt.
--# 5. If nonopt is not specified, then target and build default to host.
--
--# The aliases save the names the user supplied, while $host etc.
--# will get canonicalized.
--case $host---$target---$nonopt in
--NONE---*---* | *---NONE---* | *---*---NONE) ;;
--*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
--esac
--
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
- # Make sure we can run config.sub.
--if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
--else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
--fi
-+$ac_config_sub sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6
-+if test "${ac_cv_build+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_build_alias=$build_alias
-+test -z "$ac_cv_build_alias" &&
-+ ac_cv_build_alias=`$ac_config_guess`
-+test -z "$ac_cv_build_alias" &&
-+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+ { (exit 1); exit 1; }; }
-+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6
-+build=$ac_cv_build
-+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+
-+echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6
-+if test "${ac_cv_host+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_host_alias=$host_alias
-+test -z "$ac_cv_host_alias" &&
-+ ac_cv_host_alias=$ac_cv_build_alias
-+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6
-+host=$ac_cv_host
-+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+
-+echo "$as_me:$LINENO: checking target system type" >&5
-+echo $ECHO_N "checking target system type... $ECHO_C" >&6
-+if test "${ac_cv_target+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_target_alias=$target_alias
-+test "x$ac_cv_target_alias" = "x" &&
-+ ac_cv_target_alias=$ac_cv_host_alias
-+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-+echo "${ECHO_T}$ac_cv_target" >&6
-+target=$ac_cv_target
-+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
--echo $ac_n "checking host system type""... $ac_c" 1>&6
--echo "configure:760: checking host system type" >&5
-
--host_alias=$host
--case "$host_alias" in
--NONE)
-- case $nonopt in
-- NONE)
-- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-- fi ;;
-- *) host_alias=$nonopt ;;
-- esac ;;
--esac
--
--host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
--host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$host" 1>&6
--
--echo $ac_n "checking target system type""... $ac_c" 1>&6
--echo "configure:781: checking target system type" >&5
--
--target_alias=$target
--case "$target_alias" in
--NONE)
-- case $nonopt in
-- NONE) target_alias=$host_alias ;;
-- *) target_alias=$nonopt ;;
-- esac ;;
--esac
--
--target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
--target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$target" 1>&6
--
--echo $ac_n "checking build system type""... $ac_c" 1>&6
--echo "configure:799: checking build system type" >&5
--
--build_alias=$build
--case "$build_alias" in
--NONE)
-- case $nonopt in
-- NONE) build_alias=$host_alias ;;
-- *) build_alias=$nonopt ;;
-- esac ;;
--esac
--
--build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
--build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$build" 1>&6
--
--test "$host_alias" != "$target_alias" &&
-+# The aliases save the names the user supplied, while $host etc.
-+# will get canonicalized.
-+test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
--
-+am__api_version="1.4"
- # Find a good install program. We prefer a C program (faster),
- # so one script is as good as another. But avoid the broken or
- # incompatible versions:
-@@ -825,65 +1563,78 @@
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # ./install, which can be erroneously created by make from ./install.sh.
--echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
--echo "configure:834: checking for a BSD compatible install" >&5
-+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
- if test -z "$INSTALL"; then
--if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
-- for ac_dir in $PATH; do
-- # Account for people who put trailing slashes in PATH elements.
-- case "$ac_dir/" in
-- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-- *)
-- # OSF1 and SCO ODT 3.0 have their own names for install.
-- # Don't use installbsd from OSF since it installs stuff as root
-- # by default.
-- for ac_prog in ginstall scoinst install; do
-- if test -f $ac_dir/$ac_prog; then
-- if test $ac_prog = install &&
-- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-- # AIX install. It has an incompatible calling convention.
-- :
-- else
-- ac_cv_path_install="$ac_dir/$ac_prog -c"
-- break 2
-- fi
-- fi
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
- done
-- ;;
-- esac
-- done
-- IFS="$ac_save_IFS"
-+ done
-+ ;;
-+esac
-+done
-+
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-- INSTALL="$ac_cv_path_install"
-+ INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
-- INSTALL="$ac_install_sh"
-+ INSTALL=$ac_install_sh
- fi
- fi
--echo "$ac_t""$INSTALL" 1>&6
-+echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
--test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
--echo "configure:887: checking whether build environment is sane" >&5
-+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
- # Just in case
- sleep 1
- echo timestamp > conftestfile
-@@ -905,8 +1656,11 @@
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
-- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
--alias in your environment" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftestfile
-@@ -915,54 +1669,54 @@
- # Ok.
- :
- else
-- { echo "configure: error: newly created file is older than distributed files!
--Check your system clock" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
- rm -f conftest*
--echo "$ac_t""yes" 1>&6
--if test "$program_transform_name" = s,x,x,; then
-- program_transform_name=
--else
-- # Double any \ or $. echo might interpret backslashes.
-- cat <<\EOF_SED > conftestsed
--s,\\,\\\\,g; s,\$,$$,g
--EOF_SED
-- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-- rm -f conftestsed
--fi
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- test "$program_prefix" != NONE &&
-- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
- # Use a double $ so make ignores it.
- test "$program_suffix" != NONE &&
-- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
--
--# sed with no file args requires a program.
--test "$program_transform_name" = "" && program_transform_name="s,x,x,"
--
--echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
--echo "configure:944: checking whether ${MAKE-make} sets \${MAKE}" >&5
--set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-+# Double any \ or $. echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm conftest.sed
-+
-+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
-+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftestmake <<\EOF
-+ cat >conftest.make <<\_ACEOF
- all:
-- @echo 'ac_maketemp="${MAKE}"'
--EOF
-+ @echo 'ac_maketemp="$(MAKE)"'
-+_ACEOF
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
--eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
- if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
- else
- eval ac_cv_prog_make_${ac_make}_set=no
- fi
--rm -f conftestmake
-+rm -f conftest.make
- fi
- if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- SET_MAKE=
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
-@@ -972,82 +1726,96 @@
- VERSION=2.4.1
-
- if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
--cat >> confdefs.h <<EOF
-+
-+cat >>confdefs.h <<_ACEOF
- #define PACKAGE "$PACKAGE"
--EOF
-+_ACEOF
-
--cat >> confdefs.h <<EOF
-+
-+cat >>confdefs.h <<_ACEOF
- #define VERSION "$VERSION"
--EOF
-+_ACEOF
-
-
-
- missing_dir=`cd $ac_aux_dir && pwd`
--echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
--echo "configure:990: checking for working aclocal" >&5
-+echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
-+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
--if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-- ACLOCAL=aclocal
-- echo "$ac_t""found" 1>&6
--else
-- ACLOCAL="$missing_dir/missing aclocal"
-- echo "$ac_t""missing" 1>&6
-+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
-+ ACLOCAL=aclocal-${am__api_version}
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
-+else
-+ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
--echo "configure:1003: checking for working autoconf" >&5
-+echo "$as_me:$LINENO: checking for working autoconf" >&5
-+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
- if (autoconf --version) < /dev/null > /dev/null 2>&1; then
- AUTOCONF=autoconf
-- echo "$ac_t""found" 1>&6
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
- else
- AUTOCONF="$missing_dir/missing autoconf"
-- echo "$ac_t""missing" 1>&6
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working automake""... $ac_c" 1>&6
--echo "configure:1016: checking for working automake" >&5
-+echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
-+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
--if (automake --version) < /dev/null > /dev/null 2>&1; then
-- AUTOMAKE=automake
-- echo "$ac_t""found" 1>&6
--else
-- AUTOMAKE="$missing_dir/missing automake"
-- echo "$ac_t""missing" 1>&6
-+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
-+ AUTOMAKE=automake-${am__api_version}
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
-+else
-+ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
--echo "configure:1029: checking for working autoheader" >&5
-+echo "$as_me:$LINENO: checking for working autoheader" >&5
-+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
- if (autoheader --version) < /dev/null > /dev/null 2>&1; then
- AUTOHEADER=autoheader
-- echo "$ac_t""found" 1>&6
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
- else
- AUTOHEADER="$missing_dir/missing autoheader"
-- echo "$ac_t""missing" 1>&6
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
--echo "configure:1042: checking for working makeinfo" >&5
-+echo "$as_me:$LINENO: checking for working makeinfo" >&5
-+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
- if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
- MAKEINFO=makeinfo
-- echo "$ac_t""found" 1>&6
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
- else
- MAKEINFO="$missing_dir/missing makeinfo"
-- echo "$ac_t""missing" 1>&6
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
-
-@@ -1059,214 +1827,643 @@
-
-
-
--# Extract the first word of "gcc", so it can be a program name with args.
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1066: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="gcc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1096: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-- ac_prog_rejected=yes
-- continue
-- fi
-- ac_cv_prog_CC="cc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
-- if test $# -gt 0; then
-+ if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
-- set dummy "$ac_dir/$ac_word" "$@"
-- shift
-- ac_cv_prog_CC="$@"
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
- fi
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-- if test -z "$CC"; then
-- case "`uname -s`" in
-- *win32* | *WIN32*)
-- # Extract the first word of "cl", so it can be a program name with args.
--set dummy cl; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1147: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="cl"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-- ;;
-- esac
-+
-+ test -n "$CC" && break
-+ done
-+fi
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
- fi
-- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-+done
-+done
-+
- fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ test -n "$ac_ct_CC" && break
-+done
-
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
--echo "configure:1179: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-+ CC=$ac_ct_CC
-+fi
-
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+fi
-
--cat > conftest.$ac_ext << EOF
-
--#line 1190 "configure"
--#include "confdefs.h"
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO:" \
-+ "checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--main(){return(0);}
--EOF
--if { (eval echo configure:1195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- ac_cv_prog_cc_works=yes
-- # If we can't run a trivial program, we are probably using a cross compiler.
-- if (./conftest; exit) 2>/dev/null; then
-- ac_cv_prog_cc_cross=no
-- else
-- ac_cv_prog_cc_cross=yes
-- fi
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+echo "$as_me:$LINENO: checking for C compiler default output" >&5
-+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-+ (eval $ac_link_default) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Find the output, starting from the most likely. This scheme is
-+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-+# resort.
-+
-+# Be careful to initialize this variable, since it used to be cached.
-+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-+ac_cv_exeext=
-+# b.out is created by i960 compilers.
-+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-+ ;;
-+ conftest.$ac_ext )
-+ # This is the source file.
-+ ;;
-+ [ab].out )
-+ # We found the default executable, but exeext='' is most
-+ # certainly right.
-+ break;;
-+ *.* )
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ # FIXME: I believe we export ac_cv_exeext for Libtool,
-+ # but it would be cool to find out if it's true. Does anybody
-+ # maintain Libtool? --akim.
-+ export ac_cv_exeext
-+ break;;
-+ * )
-+ break;;
-+ esac
-+done
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- ac_cv_prog_cc_works=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+ { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6
-+
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+ if { ac_try='./$ac_file'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ cross_compiling=no
-+ else
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ fi
- fi
--rm -fr conftest*
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
--if test $ac_cv_prog_cc_works = no; then
-- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
--fi
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
--echo "configure:1221: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
--echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
--cross_compiling=$ac_cv_prog_cc_cross
--
--echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
--echo "configure:1226: checking whether we are using GNU C" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.c <<EOF
--#ifdef __GNUC__
-- yes;
--#endif
--EOF
--if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-- ac_cv_prog_gcc=yes
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6
-+
-+echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ export ac_cv_exeext
-+ break;;
-+ * ) break;;
-+ esac
-+done
- else
-- ac_cv_prog_gcc=no
--fi
-+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
--echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-+rm -f conftest$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+if test "${ac_cv_objext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-
--if test $ac_cv_prog_gcc = yes; then
-- GCC=yes
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+ break;;
-+ esac
-+done
- else
-- GCC=
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
--ac_test_CFLAGS="${CFLAGS+set}"
--ac_save_CFLAGS="$CFLAGS"
--CFLAGS=
--echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
--echo "configure:1254: checking whether ${CC-cc} accepts -g" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- echo 'void f(){}' > conftest.c
--if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+CFLAGS="-g"
-+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
- else
-- ac_cv_prog_cc_g=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_prog_cc_g=no
- fi
--
--echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
- if test "$ac_test_CFLAGS" = set; then
-- CFLAGS="$ac_save_CFLAGS"
-+ CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
-@@ -1280,295 +2477,548 @@
- CFLAGS=
- fi
- fi
-+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_stdc=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX -qlanglvl=ansi
-+# Ultrix and OSF/1 -std1
-+# HP-UX 10.20 and later -Ae
-+# HP-UX older versions -Aa -D_HPUX_SOURCE
-+# SVR4 -Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_cc_stdc=$ac_arg
-+break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext
-+done
-+rm -f conftest.$ac_ext conftest.$ac_objext
-+CC=$ac_save_CC
-
--echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
--echo "configure:1286: checking how to run the C preprocessor" >&5
--# On Suns, sometimes $CPP names a directory.
--if test -n "$CPP" && test -d "$CPP"; then
-- CPP=
- fi
--if test -z "$CPP"; then
--if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- # This must be in double quotes, not single quotes, because CPP may get
-- # substituted into the Makefile and "${CC-cc}" will confuse make.
-- CPP="${CC-cc} -E"
-- # On the NeXT, cc -E runs the code through the compiler's parser,
-- # not just through cpp.
-- cat > conftest.$ac_ext <<EOF
--#line 1301 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -E -traditional-cpp"
-- cat > conftest.$ac_ext <<EOF
--#line 1318 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1324: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -nologo -E"
-- cat > conftest.$ac_ext <<EOF
--#line 1335 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1341: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-+
-+case "x$ac_cv_prog_cc_stdc" in
-+ x|xno)
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6 ;;
-+ *)
-+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-+ CC="$CC $ac_cv_prog_cc_stdc" ;;
-+esac
-+
-+# Some people use a C++ compiler to compile C. Since we use `exit',
-+# in C++ we need to declare it. In case someone uses the same compiler
-+# for both compiling C and C++ we need to have the C++ compiler decide
-+# the declaration of exit, since it's the most demanding environment.
-+cat >conftest.$ac_ext <<_ACEOF
-+#ifndef __cplusplus
-+ choke me
-+#endif
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ for ac_declaration in \
-+ '' \
-+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
-+ 'extern "C" void std::exit (int); using std::exit;' \
-+ 'extern "C" void exit (int) throw ();' \
-+ 'extern "C" void exit (int);' \
-+ 'void exit (int);'
-+do
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+#include <stdlib.h>
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- :
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP=/lib/cpp
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+continue
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+done
- rm -f conftest*
-- ac_cv_prog_CPP="$CPP"
-+if test -n "$ac_declaration"; then
-+ echo '#ifdef __cplusplus' >>confdefs.h
-+ echo $ac_declaration >>confdefs.h
-+ echo '#endif' >>confdefs.h
- fi
-- CPP="$ac_cv_prog_CPP"
-+
- else
-- ac_cv_prog_CPP="$CPP"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--echo "$ac_t""$CPP" 1>&6
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-
- missing_dir=`cd $ac_aux_dir && pwd`
- for ac_prog in flex lex
- do
--# Extract the first word of "$ac_prog", so it can be a program name with args.
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1371: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_LEX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_LEX="$ac_prog"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_LEX="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--LEX="$ac_cv_prog_LEX"
-+LEX=$ac_cv_prog_LEX
- if test -n "$LEX"; then
-- echo "$ac_t""$LEX" 1>&6
-+ echo "$as_me:$LINENO: result: $LEX" >&5
-+echo "${ECHO_T}$LEX" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--test -n "$LEX" && break
-+ test -n "$LEX" && break
- done
--test -n "$LEX" || LEX=""$missing_dir/missing flex""
-+test -n "$LEX" || LEX="$missing_dir/missing flex"
-
--# Extract the first word of "flex", so it can be a program name with args.
--set dummy flex; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1404: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+for ac_prog in flex lex
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_LEX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_LEX="flex"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_LEX="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--LEX="$ac_cv_prog_LEX"
-+LEX=$ac_cv_prog_LEX
- if test -n "$LEX"; then
-- echo "$ac_t""$LEX" 1>&6
-+ echo "$as_me:$LINENO: result: $LEX" >&5
-+echo "${ECHO_T}$LEX" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-+ test -n "$LEX" && break
-+done
-+test -n "$LEX" || LEX=":"
-+
- if test -z "$LEXLIB"
- then
-- case "$LEX" in
-- flex*) ac_lib=fl ;;
-- *) ac_lib=l ;;
-- esac
-- echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
--echo "configure:1438: checking for yywrap in -l$ac_lib" >&5
--ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_save_LIBS="$LIBS"
--LIBS="-l$ac_lib $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1446 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5
-+echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6
-+if test "${ac_cv_lib_fl_yywrap+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lfl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char yywrap();
-+ builtin and then its argument prototype would still apply. */
-+char yywrap ();
-+int
-+main ()
-+{
-+yywrap ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_fl_yywrap=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_fl_yywrap=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5
-+echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6
-+if test $ac_cv_lib_fl_yywrap = yes; then
-+ LEXLIB="-lfl"
-+else
-+ echo "$as_me:$LINENO: checking for yywrap in -ll" >&5
-+echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6
-+if test "${ac_cv_lib_l_yywrap+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ll $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
--yywrap()
--; return 0; }
--EOF
--if { (eval echo configure:1457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char yywrap ();
-+int
-+main ()
-+{
-+yywrap ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_l_yywrap=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_lib_l_yywrap=no
- fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- LEXLIB="-l$ac_lib"
--else
-- echo "$ac_t""no" 1>&6
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5
-+echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6
-+if test $ac_cv_lib_l_yywrap = yes; then
-+ LEXLIB="-ll"
-+fi
-+
- fi
-
- fi
-
--echo $ac_n "checking lex output file root""... $ac_c" 1>&6
--echo "configure:1480: checking lex output file root" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "x$LEX" != "x:"; then
-+ echo "$as_me:$LINENO: checking lex output file root" >&5
-+echo $ECHO_N "checking lex output file root... $ECHO_C" >&6
-+if test "${ac_cv_prog_lex_root+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- # The minimal lex program is just a single line: %%. But some broken lexes
- # (Solaris, I think it was) want two %% lines, so accommodate them.
--echo '%%
--%%' | $LEX
-+cat >conftest.l <<_ACEOF
-+%%
-+%%
-+_ACEOF
-+{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5
-+ (eval $LEX conftest.l) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
- if test -f lex.yy.c; then
- ac_cv_prog_lex_root=lex.yy
- elif test -f lexyy.c; then
- ac_cv_prog_lex_root=lexyy
- else
-- { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5
-+echo "$as_me: error: cannot find output from $LEX; giving up" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
- fi
--
--echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5
-+echo "${ECHO_T}$ac_cv_prog_lex_root" >&6
-+rm -f conftest.l
- LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
-
--echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
--echo "configure:1501: checking whether yytext is a pointer" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5
-+echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6
-+if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- # POSIX says lex can declare yytext either as a pointer or an array; the
- # default is implementation-dependent. Figure out which it is, since
- # not all implementations provide the %pointer and %array declarations.
- ac_cv_prog_lex_yytext_pointer=no
- echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
--ac_save_LIBS="$LIBS"
-+ac_save_LIBS=$LIBS
- LIBS="$LIBS $LEXLIB"
--cat > conftest.$ac_ext <<EOF
--#line 1513 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
- `cat $LEX_OUTPUT_ROOT.c`
--int main() {
--
--; return 0; }
--EOF
--if { (eval echo configure:1520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_prog_lex_yytext_pointer=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_save_LIBS
- rm -f "${LEX_OUTPUT_ROOT}.c"
-
- fi
--
--echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5
-+echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6
- if test $ac_cv_prog_lex_yytext_pointer = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define YYTEXT_POINTER 1
--EOF
-+_ACEOF
-+
-+fi
-
- fi
-
- for ac_prog in 'bison -y' byacc
- do
--# Extract the first word of "$ac_prog", so it can be a program name with args.
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1546: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_YACC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$YACC"; then
- ac_cv_prog_YACC="$YACC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_YACC="$ac_prog"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_YACC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--YACC="$ac_cv_prog_YACC"
-+YACC=$ac_cv_prog_YACC
- if test -n "$YACC"; then
-- echo "$ac_t""$YACC" 1>&6
-+ echo "$as_me:$LINENO: result: $YACC" >&5
-+echo "${ECHO_T}$YACC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--test -n "$YACC" && break
-+ test -n "$YACC" && break
- done
- test -n "$YACC" || YACC="yacc"
-
-@@ -1579,126 +3029,77 @@
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # ./install, which can be erroneously created by make from ./install.sh.
--echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
--echo "configure:1588: checking for a BSD compatible install" >&5
-+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
- if test -z "$INSTALL"; then
--if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
-- for ac_dir in $PATH; do
-- # Account for people who put trailing slashes in PATH elements.
-- case "$ac_dir/" in
-- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-- *)
-- # OSF1 and SCO ODT 3.0 have their own names for install.
-- # Don't use installbsd from OSF since it installs stuff as root
-- # by default.
-- for ac_prog in ginstall scoinst install; do
-- if test -f $ac_dir/$ac_prog; then
-- if test $ac_prog = install &&
-- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-- # AIX install. It has an incompatible calling convention.
-- :
-- else
-- ac_cv_path_install="$ac_dir/$ac_prog -c"
-- break 2
-- fi
-- fi
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
- done
-- ;;
-- esac
-- done
-- IFS="$ac_save_IFS"
-+ done
-+ ;;
-+esac
-+done
-+
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-- INSTALL="$ac_cv_path_install"
-+ INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
-- INSTALL="$ac_install_sh"
-+ INSTALL=$ac_install_sh
- fi
- fi
--echo "$ac_t""$INSTALL" 1>&6
-+echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
--test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
--echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
--echo "configure:1642: checking for Cygwin environment" >&5
--if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1647 "configure"
--#include "confdefs.h"
--
--int main() {
--
--#ifndef __CYGWIN__
--#define __CYGWIN__ __CYGWIN32__
--#endif
--return __CYGWIN__;
--; return 0; }
--EOF
--if { (eval echo configure:1658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_cygwin=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_cygwin=no
--fi
--rm -f conftest*
--rm -f conftest*
--fi
--
--echo "$ac_t""$ac_cv_cygwin" 1>&6
--CYGWIN=
--test "$ac_cv_cygwin" = yes && CYGWIN=yes
--echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
--echo "configure:1675: checking for mingw32 environment" >&5
--if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1680 "configure"
--#include "confdefs.h"
--
--int main() {
--return __MINGW32__;
--; return 0; }
--EOF
--if { (eval echo configure:1687: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_mingw32=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_mingw32=no
--fi
--rm -f conftest*
--rm -f conftest*
--fi
--
--echo "$ac_t""$ac_cv_mingw32" 1>&6
--MINGW32=
--test "$ac_cv_mingw32" = yes && MINGW32=yes
- # Check whether --enable-shared or --disable-shared was given.
- if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
-@@ -1720,8 +3121,7 @@
- esac
- else
- enable_shared=yes
--fi
--
-+fi;
- # Check whether --enable-static or --disable-static was given.
- if test "${enable_static+set}" = set; then
- enableval="$enable_static"
-@@ -1743,8 +3143,7 @@
- esac
- else
- enable_static=yes
--fi
--
-+fi;
- # Check whether --enable-fast-install or --disable-fast-install was given.
- if test "${enable_fast_install+set}" = set; then
- enableval="$enable_fast_install"
-@@ -1766,21 +3165,31 @@
- esac
- else
- enable_fast_install=yes
-+fi;
-+# Find the correct PATH separator. Usually this is `:', but
-+# DJGPP uses `;' like DOS.
-+if test "X${PATH_SEPARATOR+set}" != Xset; then
-+ UNAME=${UNAME-`uname 2>/dev/null`}
-+ case X$UNAME in
-+ *-DOS) lt_cv_sys_path_separator=';' ;;
-+ *) lt_cv_sys_path_separator=':' ;;
-+ esac
-+ PATH_SEPARATOR=$lt_cv_sys_path_separator
- fi
-
-+
- # Check whether --with-gnu-ld or --without-gnu-ld was given.
- if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- test "$withval" = no || with_gnu_ld=yes
- else
- with_gnu_ld=no
--fi
--
-+fi;
- ac_prog=ld
- if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
-- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
--echo "configure:1784: checking for ld used by GCC" >&5
-+ echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
-@@ -1809,17 +3218,17 @@
- ;;
- esac
- elif test "$with_gnu_ld" = yes; then
-- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
--echo "configure:1814: checking for GNU ld" >&5
-+ echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
- else
-- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
--echo "configure:1817: checking for non-GNU ld" >&5
-+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
- fi
--if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -z "$LD"; then
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-@@ -1842,15 +3251,19 @@
-
- LD="$lt_cv_path_LD"
- if test -n "$LD"; then
-- echo "$ac_t""$LD" 1>&6
-+ echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
--test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
--echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
--echo "configure:1852: checking if the linker ($LD) is GNU ld" >&5
--if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
- if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-@@ -1859,33 +3272,33 @@
- lt_cv_prog_gnu_ld=no
- fi
- fi
--
--echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
- with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
--echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
--echo "configure:1869: checking for $LD option to reload object files" >&5
--if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
-+if test "${lt_cv_ld_reload_flag+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- lt_cv_ld_reload_flag='-r'
- fi
--
--echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
- reload_flag=$lt_cv_ld_reload_flag
- test -n "$reload_flag" && reload_flag=" $reload_flag"
-
--echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
--echo "configure:1881: checking for BSD-compatible nm" >&5
--if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-+if test "${lt_cv_path_NM+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
-@@ -1912,33 +3325,109 @@
- fi
-
- NM="$lt_cv_path_NM"
--echo "$ac_t""$NM" 1>&6
-+echo "$as_me:$LINENO: result: $NM" >&5
-+echo "${ECHO_T}$NM" >&6
-+
-+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
-+if test "${lt_cv_path_SED+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_executable_p="test -f"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+
-+ # Create a temporary directory, and hook for its removal unless debugging.
-+$debug ||
-+{
-+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+
-+# Create a (secure) tmp directory for tmp files.
-+: ${TMPDIR=/tmp}
-+{
-+ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=$TMPDIR/sed$$-$RANDOM
-+ (umask 077 && mkdir $tmp)
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-+ { (exit 1); exit 1; }
-+}
-+ _max=0
-+ _count=0
-+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+ # along with /bin/sed that truncates output.
-+ for _sed in $_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f ${_sed} && break
-+ cat /dev/null > "$tmp/sed.in"
-+ _count=0
-+ echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
-+ # Check for GNU sed and select it if it is found.
-+ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-+ lt_cv_path_SED=${_sed}
-+ break
-+ fi
-+ while true; do
-+ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-+ mv "$tmp/sed.tmp" "$tmp/sed.in"
-+ cp "$tmp/sed.in" "$tmp/sed.nl"
-+ echo >>"$tmp/sed.nl"
-+ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-+ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-+ # 40000 chars as input seems more than enough
-+ test $_count -gt 10 && break
-+ _count=`expr $_count + 1`
-+ if test $_count -gt $_max; then
-+ _max=$_count
-+ lt_cv_path_SED=$_sed
-+ fi
-+ done
-+ done
-+ rm -rf "$tmp"
-
--echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
--echo "configure:1919: checking whether ln -s works" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- rm -f conftestdata
--if ln -s X conftestdata 2>/dev/null
--then
-- rm -f conftestdata
-- ac_cv_prog_LN_S="ln -s"
--else
-- ac_cv_prog_LN_S=ln
- fi
-+
-+if test "X$SED" != "X"; then
-+ lt_cv_path_SED=$SED
-+else
-+ SED=$lt_cv_path_SED
- fi
--LN_S="$ac_cv_prog_LN_S"
--if test "$ac_cv_prog_LN_S" = "ln -s"; then
-- echo "$ac_t""yes" 1>&6
-+echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6
-+
-+echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6
- fi
-
--echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
--echo "configure:1940: checking how to recognise dependant libraries" >&5
--if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
-+if test "${lt_cv_deplibs_check_method+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
- lt_cv_file_magic_test_file=
-@@ -1949,7 +3438,7 @@
- # `unknown' -- same as none, but documents that we really don't know.
- # 'pass_all' -- all dependencies passed with no checks.
- # 'test_compile' -- check by making test program.
--# ['file_magic [regex]'] -- check by looking for files in library path
-+# 'file_magic [[regex]]' -- check by looking for files in library path
- # which responds to the $file_magic_cmd with a given egrep regex.
- # If you have `file' or equivalent on your system and you're not sure
- # whether `pass_all' will *always* work, you probably want this one.
-@@ -1978,7 +3467,7 @@
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
-- rhapsody* | darwin1.012)
-+ rhapsody* | darwin1.[012])
- lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
- ;;
- *) # Darwin 1.3 on
-@@ -2013,9 +3502,9 @@
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
-
--irix5* | irix6*)
-+irix5* | irix6* | nonstopux*)
- case $host_os in
-- irix5*)
-+ irix5* | nonstopux*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
-@@ -2037,7 +3526,7 @@
- # This must be Linux ELF.
- linux-gnu*)
- case $host_cpu in
-- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
-+ alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k)
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
-@@ -2060,6 +3549,16 @@
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-+openbsd*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
-+ else
-+ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-+ fi
-+ ;;
-+
- osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-@@ -2098,89 +3597,32 @@
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
- esac
- ;;
- esac
-
- fi
--
--echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
-
--echo $ac_n "checking for object suffix""... $ac_c" 1>&6
--echo "configure:2113: checking for object suffix" >&5
--if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- rm -f conftest*
--echo 'int i = 1;' > conftest.$ac_ext
--if { (eval echo configure:2119: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- for ac_file in conftest.*; do
-- case $ac_file in
-- *.c) ;;
-- *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-- esac
-- done
--else
-- { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
--fi
--rm -f conftest*
--fi
--
--echo "$ac_t""$ac_cv_objext" 1>&6
--OBJEXT=$ac_cv_objext
--ac_objext=$ac_cv_objext
--
--
--
--echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
--echo "configure:2139: checking for executable suffix" >&5
--if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-- ac_cv_exeext=.exe
--else
-- rm -f conftest*
-- echo 'int main () { return 0; }' > conftest.$ac_ext
-- ac_cv_exeext=
-- if { (eval echo configure:2149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-- for file in conftest.*; do
-- case $file in
-- *.c | *.o | *.obj) ;;
-- *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-- esac
-- done
-- else
-- { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-- fi
-- rm -f conftest*
-- test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
--fi
--fi
-
--EXEEXT=""
--test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
--echo "$ac_t""${ac_cv_exeext}" 1>&6
--ac_exeext=$EXEEXT
-
--if test $host != $build; then
-- ac_tool_prefix=${host_alias}-
--else
-- ac_tool_prefix=
--fi
-
-
-
-
- # Check for command to grab the raw symbol name followed by C symbol from nm.
--echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
--echo "configure:2180: checking command to parse $NM output" >&5
--if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking command to parse $NM output" >&5
-+echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
-+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
--
-+
- # These are sane defaults that work on at least a few old systems.
- # [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-@@ -2196,6 +3638,9 @@
- # Transform an extracted symbol line into a proper C declaration
- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
- # Define system-specific variables.
- case $host_os in
- aix*)
-@@ -2206,10 +3651,14 @@
- ;;
- hpux*) # Its linker distinguishes data from code symbols
- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
--irix*)
-+irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-+osf*)
-+ symcode='[BCDEGQRST]'
-+ ;;
- solaris* | sysv5*)
- symcode='[BDT]'
- ;;
-@@ -2252,10 +3701,18 @@
- int main(){nm_test_var='a';nm_test_func();return(0);}
- EOF
-
-- if { (eval echo configure:2256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
-- if { (eval echo configure:2259: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
-+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
-@@ -2277,23 +3734,23 @@
-
- cat <<EOF >> conftest.$ac_ext
- #if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
-+# define lt_ptr void *
- #else
--# define lt_ptr_t char *
-+# define lt_ptr char *
- # define const
- #endif
-
- /* The mapping between symbol names and symbols. */
- const struct {
- const char *name;
-- lt_ptr_t address;
-+ lt_ptr address;
- }
- lt_preloaded_symbols[] =
- {
- EOF
-- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
-+ sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
-+ {0, (lt_ptr) 0}
- };
-
- #ifdef __cplusplus
-@@ -2306,7 +3763,11 @@
- save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
-- if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest$ac_exeext; then
- pipe_works=yes
- fi
- LIBS="$save_LIBS"
-@@ -2339,84 +3800,665 @@
- global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
- if test -z "$lt_cv_sys_global_symbol_pipe"; then
- global_symbol_to_cdecl=
-+ global_symbol_to_c_name_address=
- else
- global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-+ global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
- fi
--if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
-- echo "$ac_t""failed" 1>&6
-+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-+then
-+ echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6
- else
-- echo "$ac_t""ok" 1>&6
-+ echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6
- fi
-
--for ac_hdr in dlfcn.h
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+# On Suns, sometimes $CPP names a directory.
-+if test -n "$CPP" && test -d "$CPP"; then
-+ CPP=
-+fi
-+if test -z "$CPP"; then
-+ if test "${ac_cv_prog_CPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CPP needs to be expanded
-+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:2356: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2361 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
- fi
-+rm -f conftest.err conftest.$ac_ext
-+
- done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-
-+ done
-+ ac_cv_prog_CPP=$CPP
-+
-+fi
-+ CPP=$ac_cv_prog_CPP
-+else
-+ ac_cv_prog_CPP=$CPP
-+fi
-+echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+rm -f conftest.err conftest.$ac_ext
-
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
--echo "configure:2401: checking for ${ac_tool_prefix}file" >&5
--if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
- else
-- case $MAGIC_CMD in
-- /*)
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
-- ?:/*)
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-- ;;
-- *)
-- ac_save_MAGIC_CMD="$MAGIC_CMD"
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="/usr/bin:$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/${ac_tool_prefix}file; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-- if test -n "$file_magic_test_file"; then
-+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-+if test "${ac_cv_prog_egrep+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-+ then ac_cv_prog_egrep='grep -E'
-+ else ac_cv_prog_egrep='egrep'
-+ fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-+ EGREP=$ac_cv_prog_egrep
-+
-+
-+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_header_stdc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_stdc=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "memchr" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "free" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+ if test "$cross_compiling" = yes; then
-+ :
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ctype.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ exit(2);
-+ exit (0);
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
-+fi
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+if test $ac_cv_header_stdc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define STDC_HEADERS 1
-+_ACEOF
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+ inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Header=no"
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+for ac_header in dlfcn.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf@gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf@gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+
-+
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+ /*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+ ?:/*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-+ ;;
-+ *)
-+ ac_save_MAGIC_CMD="$MAGIC_CMD"
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-+ ac_dummy="/usr/bin:$PATH"
-+ for ac_dir in $ac_dummy; do
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/${ac_tool_prefix}file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-+ if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-@@ -2451,17 +4493,19 @@
-
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if test -n "$MAGIC_CMD"; then
-- echo "$ac_t""$MAGIC_CMD" 1>&6
-+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
- if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
-- echo $ac_n "checking for file""... $ac_c" 1>&6
--echo "configure:2463: checking for file" >&5
--if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for file" >&5
-+echo $ECHO_N "checking for file... $ECHO_C" >&6
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- case $MAGIC_CMD in
- /*)
-@@ -2513,9 +4557,11 @@
-
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if test -n "$MAGIC_CMD"; then
-- echo "$ac_t""$MAGIC_CMD" 1>&6
-+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
- else
-@@ -2527,138 +4573,164 @@
- ;;
- esac
-
--# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
- set dummy ${ac_tool_prefix}ranlib; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2534: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--RANLIB="$ac_cv_prog_RANLIB"
-+RANLIB=$ac_cv_prog_RANLIB
- if test -n "$RANLIB"; then
-- echo "$ac_t""$RANLIB" 1>&6
-+ echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--
-+fi
- if test -z "$ac_cv_prog_RANLIB"; then
--if test -n "$ac_tool_prefix"; then
-+ ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
- set dummy ranlib; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2566: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if test -n "$RANLIB"; then
-- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_RANLIB="ranlib"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
- fi
- fi
--RANLIB="$ac_cv_prog_RANLIB"
--if test -n "$RANLIB"; then
-- echo "$ac_t""$RANLIB" 1>&6
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-+ RANLIB=$ac_ct_RANLIB
- else
-- RANLIB=":"
--fi
-+ RANLIB="$ac_cv_prog_RANLIB"
- fi
-
--# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2601: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--STRIP="$ac_cv_prog_STRIP"
-+STRIP=$ac_cv_prog_STRIP
- if test -n "$STRIP"; then
-- echo "$ac_t""$STRIP" 1>&6
-+ echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--
-+fi
- if test -z "$ac_cv_prog_STRIP"; then
--if test -n "$ac_tool_prefix"; then
-+ ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
- set dummy strip; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2633: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if test -n "$STRIP"; then
-- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+ if test -n "$ac_ct_STRIP"; then
-+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_STRIP="strip"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_STRIP="strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
- fi
- fi
--STRIP="$ac_cv_prog_STRIP"
--if test -n "$STRIP"; then
-- echo "$ac_t""$STRIP" 1>&6
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-+ STRIP=$ac_ct_STRIP
- else
-- STRIP=":"
--fi
-+ STRIP="$ac_cv_prog_STRIP"
- fi
-
-
-@@ -2668,9 +4740,8 @@
- # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
- if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
-- :
--fi
-
-+fi;
- test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
- # Some flags need to be propagated to the compiler or linker for good
-@@ -2678,8 +4749,12 @@
- case $host in
- *-*-irix6*)
- # Find out which ABI we are using.
-- echo '#line 2682 "configure"' > conftest.$ac_ext
-- if { (eval echo configure:2683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ echo '#line 4752 "configure"' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
-@@ -2699,47 +4774,64 @@
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
-- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
--echo "configure:2704: checking whether the C compiler needs -belf" >&5
--if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-+if test "${lt_cv_cc_needs_belf+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
--
-+
-+
- ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
-- cat > conftest.$ac_ext <<EOF
--#line 2717 "configure"
--#include "confdefs.h"
--
--int main() {
-+int
-+main ()
-+{
-
--; return 0; }
--EOF
--if { (eval echo configure:2724: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- lt_cv_cc_needs_belf=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- lt_cv_cc_needs_belf=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+lt_cv_cc_needs_belf=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- fi
--
--echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
-@@ -2824,16 +4916,23 @@
- old_postuninstall_cmds=
-
- if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-+ ;;
-+ *)
-+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-+ ;;
-+ esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
- fi
-
- # Allow CC to be a program name with arguments.
- set dummy $CC
- compiler="$2"
-
--echo $ac_n "checking for objdir""... $ac_c" 1>&6
--echo "configure:2837: checking for objdir" >&5
-+echo "$as_me:$LINENO: checking for objdir" >&5
-+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
- rm -f .libs 2>/dev/null
- mkdir .libs 2>/dev/null
- if test -d .libs; then
-@@ -2843,7 +4942,9 @@
- objdir=_libs
- fi
- rmdir .libs 2>/dev/null
--echo "$ac_t""$objdir" 1>&6
-+echo "$as_me:$LINENO: result: $objdir" >&5
-+echo "${ECHO_T}$objdir" >&6
-+
-
-
- # Check whether --with-pic or --without-pic was given.
-@@ -2852,17 +4953,16 @@
- pic_mode="$withval"
- else
- pic_mode=default
--fi
--
-+fi;
- test -z "$pic_mode" && pic_mode=default
-
- # We assume here that the value for lt_cv_prog_cc_pic will not be cached
- # in isolation, and that seeing it set (from the cache) indicates that
- # the associated values are set (in the cache) correctly too.
--echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
--echo "configure:2864: checking for $compiler option to produce PIC" >&5
--if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-+if test "${lt_cv_prog_cc_pic+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- lt_cv_prog_cc_pic=
- lt_cv_prog_cc_shlib=
-@@ -2882,7 +4982,7 @@
- # libC (AIX C++ library), which obviously doesn't included in libraries
- # list by gcc. This cause undefined symbols with -static flags.
- # This hack allows C programs to be linked with "-static -ldl", but
-- # we not sure about C++ programs.
-+ # not sure about C++ programs.
- lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
- ;;
- amigaos*)
-@@ -2891,7 +4991,7 @@
- # like `-m68040'.
- lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
-- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- darwin* | rhapsody*)
-@@ -2917,13 +5017,13 @@
- # PORTME Check for PIC flags for the system compiler.
- case $host_os in
- aix3* | aix4* | aix5*)
-+ lt_cv_prog_cc_wl='-Wl,'
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- lt_cv_prog_cc_static='-Bstatic'
-- lt_cv_prog_cc_wl='-Wl,'
-+ # AIX 5 now supports IA64 processor
-+ lt_cv_prog_cc_static='-Bstatic'
- else
-- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-+ lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
-
-@@ -2934,7 +5034,7 @@
- lt_cv_prog_cc_pic='+Z'
- ;;
-
-- irix5* | irix6*)
-+ irix5* | irix6* | nonstopux*)
- lt_cv_prog_cc_wl='-Wl,'
- lt_cv_prog_cc_static='-non_shared'
- # PIC (with -KPIC) is the default.
-@@ -2978,11 +5078,7 @@
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- lt_cv_prog_cc_pic='-KPIC'
- lt_cv_prog_cc_static='-Bstatic'
-- if test "x$host_vendor" = xsni; then
-- lt_cv_prog_cc_wl='-LD'
-- else
-- lt_cv_prog_cc_wl='-Wl,'
-- fi
-+ lt_cv_prog_cc_wl='-Wl,'
- ;;
-
- uts4*)
-@@ -3006,28 +5102,48 @@
- fi
-
- if test -z "$lt_cv_prog_cc_pic"; then
-- echo "$ac_t""none" 1>&6
-+ echo "$as_me:$LINENO: result: none" >&5
-+echo "${ECHO_T}none" >&6
- else
-- echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
-+ echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5
-+echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
-
- # Check to make sure the pic_flag actually works.
-- echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
--echo "configure:3016: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
-- if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
-+ if test "${lt_cv_prog_cc_pic_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-- cat > conftest.$ac_ext <<EOF
--#line 3023 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
-
--; return 0; }
--EOF
--if { (eval echo configure:3030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- case $host_os in
- hpux9* | hpux10* | hpux11*)
- # On HP-UX, both CC and GCC only warn that PIC is supported... then
-@@ -3043,17 +5159,17 @@
- lt_cv_prog_cc_pic_works=yes
- ;;
- esac
--
-+
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- lt_cv_prog_cc_pic_works=no
--
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ lt_cv_prog_cc_pic_works=no
-+
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$save_CFLAGS"
--
-+
- fi
-
-
-@@ -3064,43 +5180,65 @@
- lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
- fi
-
-- echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
-+ echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5
-+echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
- fi
-
- # Check for any special shared library compilation flags.
- if test -n "$lt_cv_prog_cc_shlib"; then
-- echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
-+echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
- if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
- else
-- echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
-+ { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
-+echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
- lt_cv_prog_cc_can_build_shared=no
- fi
- fi
-
--echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
--echo "configure:3082: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
--if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
-+if test "${lt_cv_prog_cc_static_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- lt_cv_prog_cc_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-- cat > conftest.$ac_ext <<EOF
--#line 3090 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
-
--; return 0; }
--EOF
--if { (eval echo configure:3097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- lt_cv_prog_cc_static_works=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
-
- fi
-@@ -3108,7 +5246,8 @@
-
- # Belt *and* braces to stop my trousers falling down:
- test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
--echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
-+echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5
-+echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
-
- pic_flag="$lt_cv_prog_cc_pic"
- special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-@@ -3119,12 +5258,12 @@
-
-
- # Check to see if options -o and -c are simultaneously supported by compiler
--echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
--echo "configure:3124: checking if $compiler supports -c -o file.$ac_objext" >&5
--if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-+if test "${lt_cv_compiler_c_o+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
--
-+
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
-@@ -3139,7 +5278,7 @@
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
- compiler_c_o=no
--if { (eval echo configure:3143: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
-+if { (eval echo configure:5281: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s out/conftest.err; then
-@@ -3163,29 +5302,50 @@
- fi
-
- compiler_c_o=$lt_cv_compiler_c_o
--echo "$ac_t""$compiler_c_o" 1>&6
-+echo "$as_me:$LINENO: result: $compiler_c_o" >&5
-+echo "${ECHO_T}$compiler_c_o" >&6
-
- if test x"$compiler_c_o" = x"yes"; then
- # Check to see if we can write to a .lo
-- echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
--echo "configure:3172: checking if $compiler supports -c -o file.lo" >&5
-- if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
-+ if test "${lt_cv_compiler_o_lo+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
--
-+
- lt_cv_compiler_o_lo=no
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -c -o conftest.lo"
-- cat > conftest.$ac_ext <<EOF
--#line 3181 "configure"
--#include "confdefs.h"
-+ save_objext="$ac_objext"
-+ ac_objext=lo
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
- int some_variable = 0;
--; return 0; }
--EOF
--if { (eval echo configure:3188: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
-@@ -3193,18 +5353,21 @@
- else
- lt_cv_compiler_o_lo=yes
- fi
--
-+
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ ac_objext="$save_objext"
- CFLAGS="$save_CFLAGS"
--
-+
- fi
-
- compiler_o_lo=$lt_cv_compiler_o_lo
-- echo "$ac_t""$compiler_o_lo" 1>&6
-+ echo "$as_me:$LINENO: result: $compiler_o_lo" >&5
-+echo "${ECHO_T}$compiler_o_lo" >&6
- else
- compiler_o_lo=no
- fi
-@@ -3213,17 +5376,19 @@
- hard_links="nottested"
- if test "$compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
-- echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
--echo "configure:3218: checking if we can lock with hard links" >&5
-+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- echo "$ac_t""$hard_links" 1>&6
-+ echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6
- if test "$hard_links" = no; then
-- echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
- else
-@@ -3232,22 +5397,40 @@
-
- if test "$GCC" = yes; then
- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-- echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
--echo "configure:3237: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
- echo "int some_variable = 0;" > conftest.$ac_ext
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
- compiler_rtti_exceptions=no
-- cat > conftest.$ac_ext <<EOF
--#line 3243 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
- int some_variable = 0;
--; return 0; }
--EOF
--if { (eval echo configure:3250: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
-@@ -3255,14 +5438,16 @@
- else
- compiler_rtti_exceptions=yes
- fi
--
-+
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$save_CFLAGS"
-- echo "$ac_t""$compiler_rtti_exceptions" 1>&6
-+ echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$compiler_rtti_exceptions" >&6
-
- if test "$compiler_rtti_exceptions" = "yes"; then
- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-@@ -3272,8 +5457,8 @@
- fi
-
- # See if the linker supports building shared libraries.
--echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
--echo "configure:3277: checking whether the linker ($LD) supports shared libraries" >&5
-+echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
-
- allow_undefined_flag=
- no_undefined_flag=
-@@ -3314,7 +5499,7 @@
- extract_expsyms_cmds=
-
- case $host_os in
--cygwin* | mingw* | pw32* )
-+cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
-@@ -3322,7 +5507,9 @@
- with_gnu_ld=no
- fi
- ;;
--
-+openbsd*)
-+ with_gnu_ld=no
-+ ;;
- esac
-
- ld_shlibs=yes
-@@ -3409,7 +5596,7 @@
- # can override, but on older systems we have to supply one (in ltdll.c)
- if test "x$lt_cv_need_dllmain" = "xyes"; then
- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
-+ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
- else
- ltdll_obj=
-@@ -3427,19 +5614,20 @@
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is.
- # If DATA tags from a recent dlltool are present, honour them!
-- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname-def;
-+ archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname-def;
- else
-- echo EXPORTS > $output_objdir/$soname-def;
-- _lt_hint=1;
-- cat $export_symbols | while read symbol; do
-- set dummy \$symbol;
-- case \$# in
-- 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-- *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-- esac;
-- _lt_hint=`expr 1 + \$_lt_hint`;
-- done;
-+ echo EXPORTS > $output_objdir/$soname-def;
-+ _lt_hint=1;
-+ cat $export_symbols | while read symbol; do
-+ set dummy \$symbol;
-+ case \$# in
-+ 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-+ 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
-+ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-+ esac;
-+ _lt_hint=`expr 1 + \$_lt_hint`;
-+ done;
- fi~
- '"$ltdll_cmds"'
- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-@@ -3534,80 +5722,98 @@
- ;;
-
- aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-+ hardcode_direct=yes
- archive_cmds=''
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- hardcode_direct=yes
-- else
-- # We have old collect2
-- hardcode_direct=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- hardcode_minus_L=yes
-- hardcode_libdir_flag_spec='-L$libdir'
-- hardcode_libdir_separator=
-- fi
-- shared_flag='-shared'
-- else
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ esac
-+
-+ shared_flag='-shared'
-+ else
-+ # not using gcc
- if test "$host_cpu" = ia64; then
-- shared_flag='-G'
-+ shared_flag='${wl}-G'
- else
-- shared_flag='${wl}-bM:SRE'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
- fi
-- hardcode_direct=yes
- fi
-
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # Test if we are trying to use run time linking, or normal AIX style linking.
-- # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
-- aix_use_runtimelinking=no
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
- # It seems that -bexpall can do strange things, so it is better to
- # generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='-berok'
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-- allow_undefined_flag=' -Wl,-G'
-- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
-- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-- allow_undefined_flag="-znodefs"
-- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag="-z nodefs"
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
- else
-- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-- # Warning - without using the other run time loading flags, -berok will
-- # link without error, but may produce a broken library.
-- allow_undefined_flag='${wl}-berok'
-- # This is a bit strange, but is similar to how AIX traditionally builds
-- # it's shared libraries.
-- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
-+ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='${wl}-berok'
-+ # This is a bit strange, but is similar to how AIX traditionally builds
-+ # it's shared libraries.
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-@@ -3639,11 +5845,19 @@
- ;;
-
- darwin* | rhapsody*)
-- allow_undefined_flag='-undefined suppress'
-+ case "$host_os" in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag='-undefined suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ allow_undefined_flag='-flat_namespace -undefined suppress'
-+ ;;
-+ esac
- # FIXME: Relying on posixy $() will cause problems for
- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
-+ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-+ # `"' quotes if we put them in here... so don't!
-+ archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
- # We need to add '_' to the symbols in $export_symbols first
- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
- hardcode_direct=yes
-@@ -3695,13 +5909,14 @@
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
-- irix5* | irix6*)
-+ irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='-rpath $libdir'
- fi
-- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-@@ -3718,7 +5933,7 @@
- ;;
-
- newsos6)
-- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
-@@ -3726,10 +5941,24 @@
- ;;
-
- openbsd*)
-- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ else
-+ case "$host_os" in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
- ;;
-
- os2*)
-@@ -3774,10 +6003,39 @@
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
-+ export_dynamic_flag_spec='${wl}-Bexport'
- ;;
-
- solaris*)
-+ # gcc --version < 3.0 without binutils cannot create self contained
-+ # shared libraries reliably, requiring libgcc.a to resolve some of
-+ # the object symbols generated in some cases. Libraries that use
-+ # assert need libgcc.a to resolve __eprintf, for example. Linking
-+ # a copy of libgcc.a into every shared library to guarantee resolving
-+ # such symbols causes other problems: According to Tim Van Holder
-+ # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-+ # (to the application) exception stack for one thing.
- no_undefined_flag=' -z defs'
-+ if test "$GCC" = yes; then
-+ case `$CC --version 2>/dev/null` in
-+ [12].*)
-+ cat <<EOF 1>&2
-+
-+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-+*** create self contained shared libraries on Solaris systems, without
-+*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
-+*** -no-undefined support, which will at least allow you to build shared
-+*** libraries. However, you may find that when you link such libraries
-+*** into an application without using GCC, you have to manually add
-+*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
-+*** upgrade to a newer version of GCC. Another option is to rebuild your
-+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-+
-+EOF
-+ no_undefined_flag=
-+ ;;
-+ esac
-+ fi
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-@@ -3808,13 +6066,23 @@
- ;;
-
- sysv4)
-- if test "x$host_vendor" = xsno; then
-- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
-- hardcode_direct=yes # is this really true???
-- else
-- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-- fi
-+ case $host_vendor in
-+ sni)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds='$CC -r -o $output$reload_objs'
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-@@ -3884,12 +6152,13 @@
- ;;
- esac
- fi
--echo "$ac_t""$ld_shlibs" 1>&6
-+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-+echo "${ECHO_T}$ld_shlibs" >&6
- test "$ld_shlibs" = no && can_build_shared=no
-
- # Check hardcoding attributes.
--echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
--echo "configure:3893: checking how to hardcode library paths into programs" >&5
-+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
- hardcode_action=
- if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var"; then
-@@ -3912,26 +6181,29 @@
- # directories.
- hardcode_action=unsupported
- fi
--echo "$ac_t""$hardcode_action" 1>&6
-+echo "$as_me:$LINENO: result: $hardcode_action" >&5
-+echo "${ECHO_T}$hardcode_action" >&6
-
- striplib=
- old_striplib=
--echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
--echo "configure:3921: checking whether stripping libraries is possible" >&5
-+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
- if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- echo "$ac_t""yes" 1>&6
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
- # PORTME Fill in your ld.so characteristics
--echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
--echo "configure:3935: checking dynamic linker characteristics" >&5
-+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
- library_names_spec=
- libname_spec='lib$name'
- soname_spec=
-@@ -3958,6 +6230,9 @@
-
- aix4* | aix5*)
- version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-@@ -3969,22 +6244,24 @@
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
-- aix4 | aix4.[01] | aix4.[01].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-+ # AIX (on Power*) has no versioning support, so currently we can
-+ # not hardcode correct soname into executable. Probably we can
-+ # add versioning support to collect2, so additional links can
-+ # be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
-- # lib<name>.a to let people know that these are not typical AIX shared libraries.
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
-@@ -3993,8 +6270,8 @@
- soname_spec='${libname}${release}.so$major'
- fi
- shlibpath_var=LIBPATH
-- deplibs_check_method=pass_all
- fi
-+ hardcode_into_libs=yes
- ;;
-
- amigaos*)
-@@ -4042,7 +6319,7 @@
- ;;
- yes,mingw*)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
- ;;
- yes,pw32*)
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
-@@ -4074,6 +6351,18 @@
- dynamic_linker=no
- ;;
-
-+freebsd*-gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU/FreeBSD ld.so'
-+ ;;
-+
- freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
- version_type=freebsd-$objformat
-@@ -4125,14 +6414,17 @@
- postinstall_cmds='chmod 555 $lib'
- ;;
-
--irix5* | irix6*)
-- version_type=irix
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *) version_type=irix ;;
-+ esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
- case $host_os in
-- irix5*)
-+ irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
-@@ -4206,9 +6498,19 @@
-
- openbsd*)
- version_type=sunos
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- need_version=no
-+ need_lib_prefix=no
-+ need_version=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case "$host_os" in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
- fi
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-@@ -4226,11 +6528,13 @@
- osf3* | osf4* | osf5*)
- version_type=osf
- need_version=no
-- soname_spec='${libname}${release}.so'
-- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-+ need_lib_prefix=no
-+ soname_spec='${libname}${release}.so$major'
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ hardcode_into_libs=yes
- ;;
-
- sco3.2v5*)
-@@ -4273,6 +6577,12 @@
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
-@@ -4312,13 +6622,46 @@
- dynamic_linker=no
- ;;
- esac
--echo "$ac_t""$dynamic_linker" 1>&6
-+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6
- test "$dynamic_linker" = no && can_build_shared=no
-
- # Report the final consequences.
--echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
--echo "configure:4321: checking if libtool supports shared libraries" >&5
--echo "$ac_t""$can_build_shared" 1>&6
-+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6
-+
-+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case "$host_os" in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix4*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6
-+
-+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
-@@ -4355,224 +6698,398 @@
- ;;
-
- *)
-- echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
--echo "configure:4360: checking for dlopen in -ldl" >&5
--ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_save_LIBS="$LIBS"
--LIBS="-ldl $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 4368 "configure"
--#include "confdefs.h"
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dlopen();
--
--int main() {
--dlopen()
--; return 0; }
--EOF
--if { (eval echo configure:4379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
--else
-- echo "$ac_t""no" 1>&6
--echo $ac_n "checking for dlopen""... $ac_c" 1>&6
--echo "configure:4398: checking for dlopen" >&5
--if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 4403 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking for shl_load" >&5
-+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-+if test "${ac_cv_func_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char dlopen(); below. */
--#include <assert.h>
-+ which can conflict with char shl_load (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dlopen();
--
--int main() {
--
-+ builtin and then its argument prototype would still apply. */
-+char shl_load ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
--#if defined (__stub_dlopen) || defined (__stub___dlopen)
-+#if defined (__stub_shl_load) || defined (__stub___shl_load)
- choke me
- #else
--dlopen();
-+char (*f) () = shl_load;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:4426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_dlopen=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_dlopen=no"
--fi
--rm -f conftest*
--fi
--
--if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- lt_cv_dlopen="dlopen"
-+int
-+main ()
-+{
-+return f != shl_load;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_shl_load=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-+if test $ac_cv_func_shl_load = yes; then
-+ lt_cv_dlopen="shl_load"
- else
-- echo "$ac_t""no" 1>&6
--echo $ac_n "checking for shl_load""... $ac_c" 1>&6
--echo "configure:4444: checking for shl_load" >&5
--if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 4449 "configure"
--#include "confdefs.h"
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char shl_load ();
-+int
-+main ()
-+{
-+shl_load ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dld_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dld_shl_load=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-+if test $ac_cv_lib_dld_shl_load = yes; then
-+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-+else
-+ echo "$as_me:$LINENO: checking for dlopen" >&5
-+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-+if test "${ac_cv_func_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char shl_load(); below. */
--#include <assert.h>
-+ which can conflict with char dlopen (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char shl_load();
--
--int main() {
--
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
--#if defined (__stub_shl_load) || defined (__stub___shl_load)
-+#if defined (__stub_dlopen) || defined (__stub___dlopen)
- choke me
- #else
--shl_load();
-+char (*f) () = dlopen;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:4472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_shl_load=yes"
-+int
-+main ()
-+{
-+return f != dlopen;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_dlopen=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-+if test $ac_cv_func_dlopen = yes; then
-+ lt_cv_dlopen="dlopen"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_shl_load=no"
--fi
--rm -f conftest*
--fi
-+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- lt_cv_dlopen="shl_load"
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
-+int
-+main ()
-+{
-+dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dl_dlopen=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
- else
-- echo "$ac_t""no" 1>&6
--echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
--echo "configure:4490: checking for dlopen in -lsvld" >&5
--ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lsvld $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 4498 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dlopen();
--
--int main() {
--dlopen()
--; return 0; }
--EOF
--if { (eval echo configure:4509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
-+int
-+main ()
-+{
-+dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_svld_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_svld_dlopen=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-+if test $ac_cv_lib_svld_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
- else
-- echo "$ac_t""no" 1>&6
--echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
--echo "configure:4528: checking for shl_load in -ldld" >&5
--ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldld $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 4536 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char shl_load();
--
--int main() {
--shl_load()
--; return 0; }
--EOF
--if { (eval echo configure:4547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
-+ builtin and then its argument prototype would still apply. */
-+char dld_link ();
-+int
-+main ()
-+{
-+dld_link ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dld_dld_link=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dld_dld_link=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-+if test $ac_cv_lib_dld_dld_link = yes; then
-+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
--else
-- echo "$ac_t""no" 1>&6
-+
- fi
-
--
-+
- fi
-
--
-+
- fi
-
--
-+
- fi
-
--
-+
- fi
-
- ;;
-@@ -4595,10 +7112,10 @@
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
-- echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
--echo "configure:4600: checking whether a program can dlopen itself" >&5
--if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self=cross
-@@ -4606,7 +7123,7 @@
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
--#line 4610 "configure"
-+#line 7126 "configure"
- #include "confdefs.h"
-
- #if HAVE_DLFCN_H
-@@ -4667,7 +7184,11 @@
- exit (status);
- }
- EOF
-- if { (eval echo configure:4671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
- lt_status=$?
- case x$lt_status in
-@@ -4682,17 +7203,17 @@
- fi
- rm -fr conftest*
-
--
--fi
-
--echo "$ac_t""$lt_cv_dlopen_self" 1>&6
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- LDFLAGS="$LDFLAGS $link_static_flag"
-- echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
--echo "configure:4694: checking whether a statically linked program can dlopen itself" >&5
--if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self_static=cross
-@@ -4700,7 +7221,7 @@
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
--#line 4704 "configure"
-+#line 7224 "configure"
- #include "confdefs.h"
-
- #if HAVE_DLFCN_H
-@@ -4761,7 +7282,11 @@
- exit (status);
- }
- EOF
-- if { (eval echo configure:4765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
- lt_status=$?
- case x$lt_status in
-@@ -4776,10 +7301,10 @@
- fi
- rm -fr conftest*
-
--
--fi
-
--echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
-@@ -4809,15 +7334,19 @@
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
-- echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
--echo "configure:4814: checking whether -lc should be explicitly linked in" >&5
-- if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-+ if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- $rm conftest*
- echo 'static int dummy;' > conftest.$ac_ext
-
-- if { (eval echo configure:4821: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
-@@ -4830,7 +7359,11 @@
- libname=conftest
- save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
-- if { (eval echo configure:4834: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
- then
- lt_cv_archive_cmds_need_lc=no
- else
-@@ -4842,7 +7375,8 @@
- fi
- fi
-
-- echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
-+ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
-+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
- ;;
- esac
- fi
-@@ -4870,7 +7404,7 @@
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS \
-+ for var in echo old_CC old_CFLAGS SED \
- AR AR_FLAGS CC LD LN_S NM SHELL \
- reload_flag reload_cmds wl \
- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-@@ -4882,6 +7416,7 @@
- old_striplib striplib file_magic_cmd export_symbols_cmds \
- deplibs_check_method allow_undefined_flag no_undefined_flag \
- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-+ global_symbol_to_c_name_address \
- hardcode_libdir_flag_spec hardcode_libdir_separator \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-@@ -4931,8 +7466,11 @@
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
-+# A sed that does not truncate output.
-+SED=$lt_SED
-+
- # Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="sed -e s/^X//"
-+Xsed="${SED} -e s/^X//"
-
- # The HP-UX ksh and POSIX shell print the target directory to stdout
- # if CDPATH is set.
-@@ -4948,12 +7486,12 @@
- # Whether or not to build shared libraries.
- build_libtool_libs=$enable_shared
-
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$need_lc
--
- # Whether or not to build static libraries.
- build_old_libs=$enable_static
-
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$need_lc
-+
- # Whether or not to optimize for fast installation.
- fast_install=$enable_fast_install
-
-@@ -5119,6 +7657,9 @@
- # Transform the output of nm in a proper C declaration
- global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
-
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
-+
- # This is the shared library runtime path variable.
- runpath_var=$runpath_var
-
-@@ -5241,9 +7782,9 @@
- # return TRUE;
- # }
- # /* ltdll.c ends here */
-- # This is a source program that is used to create import libraries
-- # on Windows for dlls which lack them. Don't remove nor modify the
-- # starting and closing comments
-+ # This is a source program that is used to create import libraries
-+ # on Windows for dlls which lack them. Don't remove nor modify the
-+ # starting and closing comments
- # /* impgen.c starts here */
- # /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
- #
-@@ -5411,156 +7952,386 @@
-
- # Extract the first word of "perl", so it can be a program name with args.
- set dummy perl; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:5416: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_PERL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- case "$PERL" in
-- /*)
-+ case $PERL in
-+ [\\/]* | ?:[\\/]*)
- ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
- ;;
-- ?:/*)
-- ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
-- ;;
- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_path_PERL="$ac_dir/$ac_word"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- ;;
- esac
- fi
--PERL="$ac_cv_path_PERL"
-+PERL=$ac_cv_path_PERL
-+
- if test -n "$PERL"; then
-- echo "$ac_t""$PERL" 1>&6
-+ echo "$as_me:$LINENO: result: $PERL" >&5
-+echo "${ECHO_T}$PERL" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-
-
-
--ac_safe=`echo "asm/errno.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for asm/errno.h""... $ac_c" 1>&6
--echo "configure:5453: checking for asm/errno.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_header_asm_errno_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for asm/errno.h" >&5
-+echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6
-+if test "${ac_cv_header_asm_errno_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5
-+echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 5458 "configure"
--#include "confdefs.h"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking asm/errno.h usability" >&5
-+echo $ECHO_N "checking asm/errno.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <asm/errno.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:5463: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking asm/errno.h presence" >&5
-+echo $ECHO_N "checking asm/errno.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <asm/errno.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: asm/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: asm/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf@gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: asm/errno.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: asm/errno.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: asm/errno.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: asm/errno.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf@gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for asm/errno.h" >&5
-+echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6
-+if test "${ac_cv_header_asm_errno_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_asm_errno_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5
-+echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+if test $ac_cv_header_asm_errno_h = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: *** Unable to find asm/errno.h!!!" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: *** Unable to find asm/errno.h!!!" >&5
-+echo "$as_me: error: *** Unable to find asm/errno.h!!!" >&2;}
-+ { (exit 1); exit 1; }; }
-
- fi
-
-
--ac_safe=`echo "linux/atmsap.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for linux/atmsap.h""... $ac_c" 1>&6
--echo "configure:5489: checking for linux/atmsap.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 5494 "configure"
--#include "confdefs.h"
-+
-+if test "${ac_cv_header_linux_atmsap_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5
-+echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6
-+if test "${ac_cv_header_linux_atmsap_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5
-+echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking linux/atmsap.h usability" >&5
-+echo $ECHO_N "checking linux/atmsap.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <linux/atmsap.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:5499: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking linux/atmsap.h presence" >&5
-+echo $ECHO_N "checking linux/atmsap.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <linux/atmsap.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: linux/atmsap.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf@gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: linux/atmsap.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: linux/atmsap.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf@gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5
-+echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6
-+if test "${ac_cv_header_linux_atmsap_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_linux_atmsap_h=$ac_header_preproc
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5
-+echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6
-+
-+fi
-+if test $ac_cv_header_linux_atmsap_h = yes; then
- :
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: *** Unable to find linux/atmsap.h!!!" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: *** Unable to find linux/atmsap.h!!!" >&5
-+echo "$as_me: error: *** Unable to find linux/atmsap.h!!!" >&2;}
-+ { (exit 1); exit 1; }; }
-
- fi
-
-
--echo $ac_n "checking for main in -lresolv""... $ac_c" 1>&6
--echo "configure:5524: checking for main in -lresolv" >&5
--ac_lib_var=`echo resolv'_'main | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+echo "$as_me:$LINENO: checking for main in -lresolv" >&5
-+echo $ECHO_N "checking for main in -lresolv... $ECHO_C" >&6
-+if test "${ac_cv_lib_resolv_main+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lresolv $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5532 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
--main()
--; return 0; }
--EOF
--if { (eval echo configure:5539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_lib=HAVE_LIB`echo resolv | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_lib 1
--EOF
-+int
-+main ()
-+{
-+main ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_resolv_main=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_resolv_main=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_main" >&5
-+echo "${ECHO_T}$ac_cv_lib_resolv_main" >&6
-+if test $ac_cv_lib_resolv_main = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_LIBRESOLV 1
-+_ACEOF
-
- LIBS="-lresolv $LIBS"
-
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: *** Unable to find libresolv!!!" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: *** Unable to find libresolv!!!" >&5
-+echo "$as_me: error: *** Unable to find libresolv!!!" >&2;}
-+ { (exit 1); exit 1; }; }
-
- fi
-
-@@ -5571,639 +8342,1417 @@
- CFLAGS="$INCLUDES $CFLAGS -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes"
- YACC="$YACC -d"
-
--cat >> confdefs.h <<\EOF
-+cat >>confdefs.h <<\_ACEOF
- #define YY_USE_CONST 1
--EOF
-+_ACEOF
-
-
- atmsigd_conf_dir=` test "x$exec_prefix" = xNONE && exec_prefix=$ac_default_prefix
- test "x$prefix" = xNONE && prefix=${exec_prefix}
- eval echo "$sysconfdir"`
--cat >> confdefs.h <<EOF
-+cat >>confdefs.h <<_ACEOF
- #define ATMSIGD_CONF "$atmsigd_conf_dir/atmsigd.conf"
--EOF
-+_ACEOF
-+
-
-
- # Check whether --with-uni or --without-uni was given.
- if test "${with_uni+set}" = set; then
- withval="$with_uni"
--
-+
- case "$with_uni" in
-- "3.0" ) cat >> confdefs.h <<\EOF
-+ "3.0" ) cat >>confdefs.h <<\_ACEOF
- #define UNI30 1
--EOF
-+_ACEOF
-
- ;;
-- "3.1" ) cat >> confdefs.h <<\EOF
-+ "3.1" ) cat >>confdefs.h <<\_ACEOF
- #define UNI31 1
--EOF
-+_ACEOF
-
- ;;
-- "4.0" ) cat >> confdefs.h <<\EOF
-+ "4.0" ) cat >>confdefs.h <<\_ACEOF
- #define UNI40 1
--EOF
-+_ACEOF
-
- ;;
- *)
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define DYNAMIC_UNI 1
--EOF
-+_ACEOF
-
-- echo "configure: warning: *** UNI version not specified correctly. Defaulting to dynamic UNI." 1>&2
-+ { echo "$as_me:$LINENO: WARNING: *** UNI version not specified correctly. Defaulting to dynamic UNI." >&5
-+echo "$as_me: WARNING: *** UNI version not specified correctly. Defaulting to dynamic UNI." >&2;}
- esac
--
-+
- else
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define DYNAMIC_UNI 1
--EOF
-+_ACEOF
-
-
--fi
--
-+fi;
-
- # Check whether --enable-allow_uni30 or --disable-allow_uni30 was given.
- if test "${enable_allow_uni30+set}" = set; then
- enableval="$enable_allow_uni30"
--
-+
- if test "$with_uni" = "3.1" ; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define ALLOW_UNI30 1
--EOF
-+_ACEOF
-
- else
-- echo "configure: warning: *** Allow UNI 3.0 was not enabled. It is only valid when UNI 3.1 is specified as the default via --with-uni." 1>&2
-+ { echo "$as_me:$LINENO: WARNING: *** Allow UNI 3.0 was not enabled. It is only valid when UNI 3.1 is specified as the default via --with-uni." >&5
-+echo "$as_me: WARNING: *** Allow UNI 3.0 was not enabled. It is only valid when UNI 3.1 is specified as the default via --with-uni." >&2;}
- fi
--
-
--fi
-
-+fi;
-
- # Check whether --enable-q2963_1 or --disable-q2963_1 was given.
- if test "${enable_q2963_1+set}" = set; then
- enableval="$enable_q2963_1"
--
-+
- if test "$with_uni" = "4.0" ; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define Q2963_1 1
--EOF
-+_ACEOF
-
- else
-- echo "configure: warning: *** Q.2963.1 was not enabled. It is only valid when UNI 4.0 is specified as the default via --with-uni." 1>&2
-+ { echo "$as_me:$LINENO: WARNING: *** Q.2963.1 was not enabled. It is only valid when UNI 4.0 is specified as the default via --with-uni." >&5
-+echo "$as_me: WARNING: *** Q.2963.1 was not enabled. It is only valid when UNI 4.0 is specified as the default via --with-uni." >&2;}
- fi
--
-
--fi
-
-+fi;
-
- # Check whether --enable-cisco or --disable-cisco was given.
- if test "${enable_cisco+set}" = set; then
- enableval="$enable_cisco"
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define CISCO 1
--EOF
-+_ACEOF
-
-
--fi
--
-+fi;
-
- # Check whether --enable-thomflex or --disable-thomflex was given.
- if test "${enable_thomflex+set}" = set; then
- enableval="$enable_thomflex"
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define THOMFLEX 1
--EOF
--
-+_ACEOF
-
--fi
-
-+fi;
-
--cat >> confdefs.h <<\EOF
-+cat >>confdefs.h <<\_ACEOF
- #define BROKEN_POLL 1
--EOF
-+_ACEOF
-
-
- # Check whether --enable-mpoa_1_1 or --disable-mpoa_1_1 was given.
- if test "${enable_mpoa_1_1+set}" = set; then
- enableval="$enable_mpoa_1_1"
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define MPOA_1_1 1
--EOF
--
-+_ACEOF
-
--fi
-
-+fi;
-
- # Check whether --enable-mpr or --disable-mpr was given.
- if test "${enable_mpr+set}" = set; then
- enableval="$enable_mpr"
--
-+
- case "$enable_mpr" in
- "" | y | ye | yes | Y | YE | YES )
-- echo $ac_n "checking for main in -lmpr""... $ac_c" 1>&6
--echo "configure:5704: checking for main in -lmpr" >&5
--ac_lib_var=`echo mpr'_'main | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+echo "$as_me:$LINENO: checking for main in -lmpr" >&5
-+echo $ECHO_N "checking for main in -lmpr... $ECHO_C" >&6
-+if test "${ac_cv_lib_mpr_main+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lmpr $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5712 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
--main()
--; return 0; }
--EOF
--if { (eval echo configure:5719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_lib=HAVE_LIB`echo mpr | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_lib 1
--EOF
-+int
-+main ()
-+{
-+main ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_mpr_main=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_mpr_main=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_mpr_main" >&5
-+echo "${ECHO_T}$ac_cv_lib_mpr_main" >&6
-+if test $ac_cv_lib_mpr_main = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_LIBMPR 1
-+_ACEOF
-
- LIBS="-lmpr $LIBS"
-
- else
-- echo "$ac_t""no" 1>&6
-
-- echo "configure: warning: *** Could not find libmpr! Is MPR installed?" 1>&2
--
--
-+ { echo "$as_me:$LINENO: WARNING: *** Could not find libmpr! Is MPR installed?" >&5
-+echo "$as_me: WARNING: *** Could not find libmpr! Is MPR installed?" >&2;}
-+
-+
- fi
-
- ;;
- esac
--
-
--fi
-
-+fi;
-
-
--trap '' 1 2 15
--cat > confcache <<\EOF
-+ ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/test/Makefile src/debug/Makefile src/qgen/Makefile src/saal/Makefile src/sigd/Makefile src/maint/Makefile src/arpd/Makefile src/ilmid/Makefile src/ilmid/asn1/Makefile src/man/Makefile src/led/Makefile src/lane/Makefile src/mpoad/Makefile src/switch/Makefile src/switch/debug/Makefile src/switch/tcp/Makefile src/config/Makefile src/config/init-redhat/Makefile src/extra/Makefile src/extra/linux-atm.spec src/extra/ANS/Makefile"
-+cat >confcache <<\_ACEOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
--# scripts and configure runs. It is not useful on other systems.
--# If it contains results you don't want to keep, you may remove or edit it.
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems. If it contains results you don't
-+# want to keep, you may remove or edit it.
- #
--# By default, configure uses ./config.cache as the cache file,
--# creating it if it does not exist already. You can give configure
--# the --cache-file=FILE option to use a different cache file; that is
--# what configure does when it calls configure scripts in
--# subdirectories, so they share the cache.
--# Giving --cache-file=/dev/null disables caching, for debugging configure.
--# config.status only pays attention to the cache file if you give it the
--# --recheck option to rerun configure.
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
- #
--EOF
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
- # So, don't put newlines in cache variables' values.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--(set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-- # `set' does not quote correctly, so add quotes (double-quote substitution
-- # turns \\\\ into \\, and sed turns \\ into \).
-- sed -n \
-- -e "s/'/'\\\\''/g" \
-- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-- ;;
-- *)
-- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-- ;;
-- esac >> confcache
--if cmp -s $cache_file confcache; then
-- :
--else
-+{
-+ (set) 2>&1 |
-+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes (double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ sed -n \
-+ "s/'/'\\\\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+ ;;
-+ *)
-+ # `set' quotes correctly as required by POSIX, so do not add quotes.
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+} |
-+ sed '
-+ t clear
-+ : clear
-+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+ t end
-+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ : end' >>confcache
-+if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
-- echo "updating cache $cache_file"
-- cat confcache > $cache_file
-+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
- fi
- rm -f confcache
-
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
- test "x$prefix" = xNONE && prefix=$ac_default_prefix
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# Any assignment to VPATH causes Sun make to only execute
--# the first set of double-colon rules, so remove it if not needed.
--# If there is a colon in the path, we need to keep it.
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
- if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/;
-+s/:*\${srcdir}:*/:/;
-+s/:*@srcdir@:*/:/;
-+s/^\([^=]*=[ ]*\):*/\1/;
-+s/:*$//;
-+s/^[^=]*=[ ]*$//;
-+}'
- fi
-
--trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
--
- DEFS=-DHAVE_CONFIG_H
-
--# Without the "./", some shells look in PATH for config.status.
--: ${CONFIG_STATUS=./config.status}
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-+ # 1. Remove the extension, and $U if already installed.
-+ ac_i=`echo "$ac_i" |
-+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-+ # 2. Add them.
-+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+done
-+LIBOBJS=$ac_libobjs
-
--echo creating $CONFIG_STATUS
--rm -f $CONFIG_STATUS
--cat > $CONFIG_STATUS <<EOF
--#! /bin/sh
--# Generated automatically by configure.
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
- # Run this file to recreate the current configuration.
--# This directory was configured as follows,
--# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--#
--# $0 $ac_configure_args
--#
- # Compiler output produced by configure, useful for debugging
--# configure, is in ./config.log if it exists.
-+# configure, is in config.log if it exists.
-
--ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
--for ac_option
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+
-+# Support unset when possible.
-+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
- do
-- case "\$ac_option" in
-- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-- echo "$CONFIG_STATUS generated by autoconf version 2.13"
-- exit 0 ;;
-- -help | --help | --hel | --he | --h)
-- echo "\$ac_cs_usage"; exit 0 ;;
-- *) echo "\$ac_cs_usage"; exit 1 ;;
-+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
- esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
- done
-+;;
-+ esac
-
--ac_given_srcdir=$srcdir
--ac_given_INSTALL="$INSTALL"
--
--trap 'rm -fr `echo "Makefile \
-- doc/Makefile \
-- m4/Makefile \
-- src/Makefile \
-- src/include/Makefile \
-- src/lib/Makefile \
-- src/test/Makefile \
-- src/debug/Makefile \
-- src/qgen/Makefile \
-- src/saal/Makefile \
-- src/sigd/Makefile \
-- src/maint/Makefile \
-- src/arpd/Makefile \
-- src/ilmid/Makefile \
-- src/ilmid/asn1/Makefile \
-- src/man/Makefile \
-- src/led/Makefile \
-- src/lane/Makefile \
-- src/mpoad/Makefile \
-- src/switch/Makefile \
-- src/switch/debug/Makefile \
-- src/switch/tcp/Makefile \
-- src/config/Makefile \
-- src/config/init-redhat/Makefile \
-- src/extra/Makefile \
-- src/extra/linux-atm.spec \
-- src/extra/ANS/Makefile
-- config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-
--# Protect against being on the right side of a sed subst in config.status.
--sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
-- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
--$ac_vpsub
--$extrasub
--s%@SHELL@%$SHELL%g
--s%@CFLAGS@%$CFLAGS%g
--s%@CPPFLAGS@%$CPPFLAGS%g
--s%@CXXFLAGS@%$CXXFLAGS%g
--s%@FFLAGS@%$FFLAGS%g
--s%@DEFS@%$DEFS%g
--s%@LDFLAGS@%$LDFLAGS%g
--s%@LIBS@%$LIBS%g
--s%@exec_prefix@%$exec_prefix%g
--s%@prefix@%$prefix%g
--s%@program_transform_name@%$program_transform_name%g
--s%@bindir@%$bindir%g
--s%@sbindir@%$sbindir%g
--s%@libexecdir@%$libexecdir%g
--s%@datadir@%$datadir%g
--s%@sysconfdir@%$sysconfdir%g
--s%@sharedstatedir@%$sharedstatedir%g
--s%@localstatedir@%$localstatedir%g
--s%@libdir@%$libdir%g
--s%@includedir@%$includedir%g
--s%@oldincludedir@%$oldincludedir%g
--s%@infodir@%$infodir%g
--s%@mandir@%$mandir%g
--s%@host@%$host%g
--s%@host_alias@%$host_alias%g
--s%@host_cpu@%$host_cpu%g
--s%@host_vendor@%$host_vendor%g
--s%@host_os@%$host_os%g
--s%@target@%$target%g
--s%@target_alias@%$target_alias%g
--s%@target_cpu@%$target_cpu%g
--s%@target_vendor@%$target_vendor%g
--s%@target_os@%$target_os%g
--s%@build@%$build%g
--s%@build_alias@%$build_alias%g
--s%@build_cpu@%$build_cpu%g
--s%@build_vendor@%$build_vendor%g
--s%@build_os@%$build_os%g
--s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
--s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
--s%@INSTALL_DATA@%$INSTALL_DATA%g
--s%@PACKAGE@%$PACKAGE%g
--s%@VERSION@%$VERSION%g
--s%@ACLOCAL@%$ACLOCAL%g
--s%@AUTOCONF@%$AUTOCONF%g
--s%@AUTOMAKE@%$AUTOMAKE%g
--s%@AUTOHEADER@%$AUTOHEADER%g
--s%@MAKEINFO@%$MAKEINFO%g
--s%@SET_MAKE@%$SET_MAKE%g
--s%@LIBVER_CURRENT@%$LIBVER_CURRENT%g
--s%@LIBVER_REVISION@%$LIBVER_REVISION%g
--s%@LIBVER_AGE@%$LIBVER_AGE%g
--s%@CC@%$CC%g
--s%@LEX@%$LEX%g
--s%@LEXLIB@%$LEXLIB%g
--s%@CPP@%$CPP%g
--s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
--s%@YACC@%$YACC%g
--s%@LN_S@%$LN_S%g
--s%@OBJEXT@%$OBJEXT%g
--s%@EXEEXT@%$EXEEXT%g
--s%@ECHO@%$ECHO%g
--s%@RANLIB@%$RANLIB%g
--s%@STRIP@%$STRIP%g
--s%@LIBTOOL@%$LIBTOOL%g
--s%@LIBTOOL_DEPS@%$LIBTOOL_DEPS%g
--s%@PERL@%$PERL%g
-
--CEOF
--EOF
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-
--cat >> $CONFIG_STATUS <<\EOF
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-
--# Split the substitutions into bite-sized pieces for seds with
--# small command number limits, like on Digital OSF/1 and HP-UX.
--ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
--ac_file=1 # Number of current file.
--ac_beg=1 # First line for current file.
--ac_end=$ac_max_sed_cmds # Line after last line for current file.
--ac_more_lines=:
--ac_sed_cmds=""
--while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-- else
-- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-- fi
-- if test ! -s conftest.s$ac_file; then
-- ac_more_lines=false
-- rm -f conftest.s$ac_file
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
- else
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f conftest.s$ac_file"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-- fi
-- ac_file=`expr $ac_file + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_cmds`
-+ as_ln_s='ln -s'
- fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+exec 6>&1
-+
-+# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling. Logging --version etc. is OK.
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+} >&5
-+cat >&5 <<_CSEOF
-+
-+This file was extended by $as_me, which was
-+generated by GNU Autoconf 2.57. Invocation command line was
-+
-+ CONFIG_FILES = $CONFIG_FILES
-+ CONFIG_HEADERS = $CONFIG_HEADERS
-+ CONFIG_LINKS = $CONFIG_LINKS
-+ CONFIG_COMMANDS = $CONFIG_COMMANDS
-+ $ $0 $@
-+
-+_CSEOF
-+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-+echo >&5
-+_ACEOF
-+
-+# Files that config.status was made for.
-+if test -n "$ac_config_files"; then
-+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_headers"; then
-+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_links"; then
-+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_commands"; then
-+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+ -h, --help print this help, then exit
-+ -V, --version print version number, then exit
-+ -q, --quiet do not print progress messages
-+ -d, --debug don't remove temporary files
-+ --recheck update $as_me by reconfiguring in the same conditions
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+ --header=FILE[:TEMPLATE]
-+ instantiate the configuration header FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration headers:
-+$config_headers
-+
-+Configuration commands:
-+$config_commands
-+
-+Report bugs to <bug-autoconf@gnu.org>."
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+config.status
-+configured by $0, generated by GNU Autoconf 2.57,
-+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-+Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+srcdir=$srcdir
-+INSTALL="$INSTALL"
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value. By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+ case $1 in
-+ --*=*)
-+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
-+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_shift=:
-+ ;;
-+ -*)
-+ ac_option=$1
-+ ac_optarg=$2
-+ ac_shift=shift
-+ ;;
-+ *) # This is not an option, so the user has probably given explicit
-+ # arguments.
-+ ac_option=$1
-+ ac_need_defaults=false;;
-+ esac
-+
-+ case $ac_option in
-+ # Handling of the options.
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+ ac_cs_recheck=: ;;
-+ --version | --vers* | -V )
-+ echo "$ac_cs_version"; exit 0 ;;
-+ --he | --h)
-+ # Conflict between --help and --header
-+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit 0 ;;
-+ --debug | --d* | -d )
-+ debug=: ;;
-+ --file | --fil | --fi | --f )
-+ $ac_shift
-+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ ac_need_defaults=false;;
-+ --header | --heade | --head | --hea )
-+ $ac_shift
-+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-+ ac_need_defaults=false;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+ ac_cs_silent=: ;;
-+
-+ # This is an error.
-+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; } ;;
-+
-+ *) ac_config_targets="$ac_config_targets $1" ;;
-+
-+ esac
-+ shift
-+done
-+
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+ exec 6>/dev/null
-+ ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+#
-+# INIT-COMMANDS section.
-+#
-+
-+
-+
-+_ACEOF
-+
-+
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_config_target in $ac_config_targets
-+do
-+ case "$ac_config_target" in
-+ # Handling of arguments.
-+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-+ "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
-+ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-+ "src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;;
-+ "src/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
-+ "src/test/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/test/Makefile" ;;
-+ "src/debug/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/debug/Makefile" ;;
-+ "src/qgen/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/qgen/Makefile" ;;
-+ "src/saal/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/saal/Makefile" ;;
-+ "src/sigd/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/sigd/Makefile" ;;
-+ "src/maint/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/maint/Makefile" ;;
-+ "src/arpd/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/arpd/Makefile" ;;
-+ "src/ilmid/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/ilmid/Makefile" ;;
-+ "src/ilmid/asn1/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/ilmid/asn1/Makefile" ;;
-+ "src/man/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/man/Makefile" ;;
-+ "src/led/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/led/Makefile" ;;
-+ "src/lane/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lane/Makefile" ;;
-+ "src/mpoad/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/mpoad/Makefile" ;;
-+ "src/switch/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/switch/Makefile" ;;
-+ "src/switch/debug/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/switch/debug/Makefile" ;;
-+ "src/switch/tcp/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/switch/tcp/Makefile" ;;
-+ "src/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/config/Makefile" ;;
-+ "src/config/init-redhat/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/config/init-redhat/Makefile" ;;
-+ "src/extra/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/Makefile" ;;
-+ "src/extra/linux-atm.spec" ) CONFIG_FILES="$CONFIG_FILES src/extra/linux-atm.spec" ;;
-+ "src/extra/ANS/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/ANS/Makefile" ;;
-+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
-+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
- done
--if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
-+
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used. Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
- fi
--EOF
-
--cat >> $CONFIG_STATUS <<EOF
-+# Have a temporary directory for convenience. Make it in the build tree
-+# simply because there is no reason to put it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Create a temporary directory, and hook for its removal unless debugging.
-+$debug ||
-+{
-+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-
--CONFIG_FILES=\${CONFIG_FILES-"Makefile \
-- doc/Makefile \
-- m4/Makefile \
-- src/Makefile \
-- src/include/Makefile \
-- src/lib/Makefile \
-- src/test/Makefile \
-- src/debug/Makefile \
-- src/qgen/Makefile \
-- src/saal/Makefile \
-- src/sigd/Makefile \
-- src/maint/Makefile \
-- src/arpd/Makefile \
-- src/ilmid/Makefile \
-- src/ilmid/asn1/Makefile \
-- src/man/Makefile \
-- src/led/Makefile \
-- src/lane/Makefile \
-- src/mpoad/Makefile \
-- src/switch/Makefile \
-- src/switch/debug/Makefile \
-- src/switch/tcp/Makefile \
-- src/config/Makefile \
-- src/config/init-redhat/Makefile \
-- src/extra/Makefile \
-- src/extra/linux-atm.spec \
-- src/extra/ANS/Makefile
-- "}
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=./confstat$$-$RANDOM
-+ (umask 077 && mkdir $tmp)
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in ." >&2
-+ { (exit 1); exit 1; }
-+}
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+
-+#
-+# CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "\$CONFIG_FILES"; then
-+ # Protect against being on the right side of a sed subst in config.status.
-+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-+s,@SHELL@,$SHELL,;t t
-+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-+s,@exec_prefix@,$exec_prefix,;t t
-+s,@prefix@,$prefix,;t t
-+s,@program_transform_name@,$program_transform_name,;t t
-+s,@bindir@,$bindir,;t t
-+s,@sbindir@,$sbindir,;t t
-+s,@libexecdir@,$libexecdir,;t t
-+s,@datadir@,$datadir,;t t
-+s,@sysconfdir@,$sysconfdir,;t t
-+s,@sharedstatedir@,$sharedstatedir,;t t
-+s,@localstatedir@,$localstatedir,;t t
-+s,@libdir@,$libdir,;t t
-+s,@includedir@,$includedir,;t t
-+s,@oldincludedir@,$oldincludedir,;t t
-+s,@infodir@,$infodir,;t t
-+s,@mandir@,$mandir,;t t
-+s,@build_alias@,$build_alias,;t t
-+s,@host_alias@,$host_alias,;t t
-+s,@target_alias@,$target_alias,;t t
-+s,@DEFS@,$DEFS,;t t
-+s,@ECHO_C@,$ECHO_C,;t t
-+s,@ECHO_N@,$ECHO_N,;t t
-+s,@ECHO_T@,$ECHO_T,;t t
-+s,@LIBS@,$LIBS,;t t
-+s,@build@,$build,;t t
-+s,@build_cpu@,$build_cpu,;t t
-+s,@build_vendor@,$build_vendor,;t t
-+s,@build_os@,$build_os,;t t
-+s,@host@,$host,;t t
-+s,@host_cpu@,$host_cpu,;t t
-+s,@host_vendor@,$host_vendor,;t t
-+s,@host_os@,$host_os,;t t
-+s,@target@,$target,;t t
-+s,@target_cpu@,$target_cpu,;t t
-+s,@target_vendor@,$target_vendor,;t t
-+s,@target_os@,$target_os,;t t
-+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-+s,@PACKAGE@,$PACKAGE,;t t
-+s,@VERSION@,$VERSION,;t t
-+s,@ACLOCAL@,$ACLOCAL,;t t
-+s,@AUTOCONF@,$AUTOCONF,;t t
-+s,@AUTOMAKE@,$AUTOMAKE,;t t
-+s,@AUTOHEADER@,$AUTOHEADER,;t t
-+s,@MAKEINFO@,$MAKEINFO,;t t
-+s,@SET_MAKE@,$SET_MAKE,;t t
-+s,@LIBVER_CURRENT@,$LIBVER_CURRENT,;t t
-+s,@LIBVER_REVISION@,$LIBVER_REVISION,;t t
-+s,@LIBVER_AGE@,$LIBVER_AGE,;t t
-+s,@CC@,$CC,;t t
-+s,@CFLAGS@,$CFLAGS,;t t
-+s,@LDFLAGS@,$LDFLAGS,;t t
-+s,@CPPFLAGS@,$CPPFLAGS,;t t
-+s,@ac_ct_CC@,$ac_ct_CC,;t t
-+s,@EXEEXT@,$EXEEXT,;t t
-+s,@OBJEXT@,$OBJEXT,;t t
-+s,@LEX@,$LEX,;t t
-+s,@LEXLIB@,$LEXLIB,;t t
-+s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t
-+s,@YACC@,$YACC,;t t
-+s,@LN_S@,$LN_S,;t t
-+s,@ECHO@,$ECHO,;t t
-+s,@RANLIB@,$RANLIB,;t t
-+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-+s,@STRIP@,$STRIP,;t t
-+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-+s,@CPP@,$CPP,;t t
-+s,@EGREP@,$EGREP,;t t
-+s,@LIBTOOL@,$LIBTOOL,;t t
-+s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t
-+s,@PERL@,$PERL,;t t
-+s,@LIBOBJS@,$LIBOBJS,;t t
-+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-+CEOF
-+
-+_ACEOF
-+
-+ cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Split the substitutions into bite-sized pieces for seds with
-+ # small command number limits, like on Digital OSF/1 and HP-UX.
-+ ac_max_sed_lines=48
-+ ac_sed_frag=1 # Number of current file.
-+ ac_beg=1 # First line for current file.
-+ ac_end=$ac_max_sed_lines # Line after last line for current file.
-+ ac_more_lines=:
-+ ac_sed_cmds=
-+ while $ac_more_lines; do
-+ if test $ac_beg -gt 1; then
-+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ else
-+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ fi
-+ if test ! -s $tmp/subs.frag; then
-+ ac_more_lines=false
-+ else
-+ # The purpose of the label and of the branching condition is to
-+ # speed up the sed processing (if there are no `@' at all, there
-+ # is no need to browse any of the substitutions).
-+ # These are the two extra sed commands mentioned above.
-+ (echo ':t
-+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-+ else
-+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-+ fi
-+ ac_sed_frag=`expr $ac_sed_frag + 1`
-+ ac_beg=$ac_end
-+ ac_end=`expr $ac_end + $ac_max_sed_lines`
-+ fi
-+ done
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds=cat
-+ fi
-+fi # test -n "$CONFIG_FILES"
-+
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-- esac
--
-- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
--
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-- else
-- ac_dir_suffix= ac_dots=
-- fi
--
-- case "$ac_given_srcdir" in
-- .) srcdir=.
-- if test -z "$ac_dots"; then top_srcdir=.
-- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
-+ esac
-+
-+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
- *) # Relative path.
-- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-- top_srcdir="$ac_dots$ac_given_srcdir" ;;
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-+# absolute.
-+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-+
-+
-+ case $INSTALL in
-+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
-- case "$ac_given_INSTALL" in
-- [/$]*) INSTALL="$ac_given_INSTALL" ;;
-- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-- esac
--
-- echo creating "$ac_file"
-- rm -f "$ac_file"
-- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-- case "$ac_file" in
-- *Makefile*) ac_comsub="1i\\
--# $configure_input" ;;
-- *) ac_comsub= ;;
-- esac
--
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- sed -e "$ac_comsub
--s%@configure_input@%$configure_input%g
--s%@srcdir@%$srcdir%g
--s%@top_srcdir@%$top_srcdir%g
--s%@INSTALL@%$INSTALL%g
--" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
--fi; done
--rm -f conftest.s*
-+ if test x"$ac_file" != x-; then
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ rm -f "$ac_file"
-+ fi
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ configure_input=
-+ else
-+ configure_input="$ac_file. "
-+ fi
-+ configure_input=$configure_input"Generated from `echo $ac_file_in |
-+ sed 's,.*/,,'` by configure."
-+
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ echo $f;;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo $f
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo $srcdir/$f
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s,@configure_input@,$configure_input,;t t
-+s,@srcdir@,$ac_srcdir,;t t
-+s,@abs_srcdir@,$ac_abs_srcdir,;t t
-+s,@top_srcdir@,$ac_top_srcdir,;t t
-+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-+s,@builddir@,$ac_builddir,;t t
-+s,@abs_builddir@,$ac_abs_builddir,;t t
-+s,@top_builddir@,$ac_top_builddir,;t t
-+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-+s,@INSTALL@,$ac_INSTALL,;t t
-+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-+ rm -f $tmp/stdin
-+ if test x"$ac_file" != x-; then
-+ mv $tmp/out $ac_file
-+ else
-+ cat $tmp/out
-+ rm -f $tmp/out
-+ fi
-+
-+done
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+#
-+# CONFIG_HEADER section.
-+#
-
- # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
- # NAME is the cpp macro being defined and VALUE is the value it is being given.
- #
- # ac_d sets the value in "#define NAME VALUE" lines.
--ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
--ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
--ac_dC='\3'
--ac_dD='%g'
--# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
--ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_uB='\([ ]\)%\1#\2define\3'
-+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-+ac_dB='[ ].*$,\1#\2'
-+ac_dC=' '
-+ac_dD=',;t'
-+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-+ac_uB='$,\1#\2define\3'
- ac_uC=' '
--ac_uD='\4%g'
--# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
--ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_eB='$%\1#\2define\3'
--ac_eC=' '
--ac_eD='%g'
-+ac_uD=',;t'
-
--if test "${CONFIG_HEADERS+set}" != set; then
--EOF
--cat >> $CONFIG_STATUS <<EOF
-- CONFIG_HEADERS="config.h"
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--fi
--for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
- esac
-
-- echo creating $ac_file
--
-- rm -f conftest.frag conftest.in conftest.out
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- cat $ac_file_inputs > conftest.in
--
--EOF
-+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-
--# Transform confdefs.h into a sed script conftest.vals that substitutes
--# the proper values into config.h.in to produce config.h. And first:
--# Protect against being on the right side of a sed subst in config.status.
--# Protect against being in an unquoted here document in config.status.
--rm -f conftest.vals
--cat > conftest.hdr <<\EOF
--s/[\\&%]/\\&/g
--s%[\\$`]%\\&%g
--s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
--s%ac_d%ac_u%gp
--s%ac_u%ac_e%gp
--EOF
--sed -n -f conftest.hdr confdefs.h > conftest.vals
--rm -f conftest.hdr
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ echo $f;;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo $f
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo $srcdir/$f
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+ # Remove the trailing spaces.
-+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-+
-+_ACEOF
-+
-+# Transform confdefs.h into two sed scripts, `conftest.defines' and
-+# `conftest.undefs', that substitutes the proper values into
-+# config.h.in to produce config.h. The first handles `#define'
-+# templates, and the second `#undef' templates.
-+# And first: Protect against being on the right side of a sed subst in
-+# config.status. Protect against being in an unquoted here document
-+# in config.status.
-+rm -f conftest.defines conftest.undefs
-+# Using a here document instead of a string reduces the quoting nightmare.
-+# Putting comments in sed scripts is not portable.
-+#
-+# `end' is used to avoid that the second main sed command (meant for
-+# 0-ary CPP macros) applies to n-ary macro definitions.
-+# See the Autoconf documentation for `clear'.
-+cat >confdef2sed.sed <<\_ACEOF
-+s/[\\&,]/\\&/g
-+s,[\\$`],\\&,g
-+t clear
-+: clear
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-+t end
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-+: end
-+_ACEOF
-+# If some macros were called several times there might be several times
-+# the same #defines, which is useless. Nevertheless, we may not want to
-+# sort them, since we want the *last* AC-DEFINE to be honored.
-+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-+rm -f confdef2sed.sed
-
- # This sed command replaces #undef with comments. This is necessary, for
- # example, in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
--cat >> conftest.vals <<\EOF
--s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
--EOF
--
--# Break up conftest.vals because some shells have a limit on
--# the size of here documents, and old seds have small limits too.
--
-+cat >>conftest.undefs <<\_ACEOF
-+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-+_ACEOF
-+
-+# Break up conftest.defines because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-+echo ' :' >>$CONFIG_STATUS
-+rm -f conftest.tail
-+while grep . conftest.defines >/dev/null
-+do
-+ # Write a limited-size here document to $tmp/defines.sed.
-+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#define' lines.
-+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-+ echo 'CEOF
-+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-+ rm -f conftest.defines
-+ mv conftest.tail conftest.defines
-+done
-+rm -f conftest.defines
-+echo ' fi # grep' >>$CONFIG_STATUS
-+echo >>$CONFIG_STATUS
-+
-+# Break up conftest.undefs because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
- rm -f conftest.tail
--while :
-+while grep . conftest.undefs >/dev/null
- do
-- ac_lines=`grep -c . conftest.vals`
-- # grep -c gives empty output for an empty file on some AIX systems.
-- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-- # Write a limited-size here document to conftest.frag.
-- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-+ # Write a limited-size here document to $tmp/undefs.sed.
-+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#undef'
-+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--' >> $CONFIG_STATUS
-- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-- rm -f conftest.vals
-- mv conftest.tail conftest.vals
--done
--rm -f conftest.vals
--
--cat >> $CONFIG_STATUS <<\EOF
-- rm -f conftest.frag conftest.h
-- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
-- cat conftest.in >> conftest.h
-- rm -f conftest.in
-- if cmp -s $ac_file conftest.h 2>/dev/null; then
-- echo "$ac_file is unchanged"
-- rm -f conftest.h
-- else
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-+ rm -f conftest.undefs
-+ mv conftest.tail conftest.undefs
-+done
-+rm -f conftest.undefs
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ echo "/* Generated by configure. */" >$tmp/config.h
-+ else
-+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
-+ fi
-+ cat $tmp/in >>$tmp/config.h
-+ rm -f $tmp/in
-+ if test x"$ac_file" != x-; then
-+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-+echo "$as_me: $ac_file is unchanged" >&6;}
-+ else
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+
-+ rm -f $ac_file
-+ mv $tmp/config.h $ac_file
- fi
-- rm -f $ac_file
-- mv conftest.h $ac_file
-+ else
-+ cat $tmp/config.h
-+ rm -f $tmp/config.h
- fi
--fi; done
-+done
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+#
-+# CONFIG_COMMANDS section.
-+#
-+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_dest" : 'X\(//\)[^/]' \| \
-+ X"$ac_dest" : 'X\(//\)$' \| \
-+ X"$ac_dest" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_dest" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-+# absolute.
-+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-+echo "$as_me: executing $ac_dest commands" >&6;}
-+ case $ac_dest in
-+ default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;;
-+ esac
-+done
-+_ACEOF
-
--exit 0
--EOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+{ (exit 0); exit 0; }
-+_ACEOF
- chmod +x $CONFIG_STATUS
--rm -fr confdefs* $ac_clean_files
--test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded. So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status. When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+ ac_cs_success=:
-+ ac_config_status_args=
-+ test "$silent" = yes &&
-+ ac_config_status_args="$ac_config_status_args --quiet"
-+ exec 5>/dev/null
-+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+ exec 5>>config.log
-+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+ # would make configure fail if this is the last instruction.
-+ $ac_cs_success || { (exit 1); exit 1; }
-+fi
-
-
---- linux-atm-2.4.1.orig/ltmain.sh
-+++ linux-atm-2.4.1/ltmain.sh
-@@ -49,14 +49,14 @@
- fi
-
- # The name of this program.
--progname=`$echo "$0" | sed 's%^.*/%%'`
-+progname=`$echo "$0" | ${SED} 's%^.*/%%'`
- modename="$progname"
-
- # Constants.
- PROGRAM=ltmain.sh
- PACKAGE=libtool
--VERSION=1.4
--TIMESTAMP=" (1.920 2001/04/24 23:26:18)"
-+VERSION=1.4.3
-+TIMESTAMP=" (1.922.2.111 2002/10/23 02:54:36)"
-
- default_mode=
- help="Try \`$progname --help' for more information."
-@@ -67,10 +67,19 @@
-
- # Sed substitution that helps us do robust quoting. It backslashifies
- # metacharacters that are still active within double-quoted strings.
--Xsed='sed -e 1s/^X//'
-+Xsed="${SED}"' -e 1s/^X//'
- sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
--SP2NL='tr \040 \012'
--NL2SP='tr \015\012 \040\040'
-+# test EBCDIC or ASCII
-+case `echo A|od -x` in
-+ *[Cc]1*) # EBCDIC based system
-+ SP2NL="tr '\100' '\n'"
-+ NL2SP="tr '\r\n' '\100\100'"
-+ ;;
-+ *) # Assume ASCII based system
-+ SP2NL="tr '\040' '\012'"
-+ NL2SP="tr '\015\012' '\040\040'"
-+ ;;
-+esac
-
- # NLS nuisances.
- # Only set LANG and LC_ALL to C if already set.
-@@ -84,6 +93,9 @@
- save_LANG="$LANG"; LANG=C; export LANG
- fi
-
-+# Make sure IFS has a sensible default
-+: ${IFS=" "}
-+
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- echo "$modename: not configured to build any kind of library" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-@@ -141,7 +153,7 @@
- ;;
-
- --config)
-- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
-+ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
- exit 0
- ;;
-
-@@ -174,6 +186,8 @@
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
-+ --preserve-dup-deps) duplicate_deps="yes" ;;
-+
- --quiet | --silent)
- show=:
- ;;
-@@ -202,12 +216,17 @@
- exit 1
- fi
-
-+# If this variable is set in any of the actions, the command in it
-+# will be execed at the end. This prevents here-documents from being
-+# left over by shells.
-+exec_cmd=
-+
- if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- case $nonopt in
-- *cc | *++ | gcc* | *-gcc*)
-+ *cc | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
-@@ -329,7 +348,7 @@
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
-+ save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
-@@ -615,6 +634,10 @@
- # Now arrange that obj and lo_libobj become the same file
- $show "(cd $xdir && $LN_S $baseobj $libobj)"
- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-+ # Unlock the critical section if it was locked
-+ if test "$need_locks" != no; then
-+ $run $rm "$lockfile"
-+ fi
- exit 0
- else
- error=$?
-@@ -745,6 +768,7 @@
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
-+ inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
-@@ -875,6 +899,11 @@
- prev=
- continue
- ;;
-+ inst_prefix)
-+ inst_prefix_dir="$arg"
-+ prev=
-+ continue
-+ ;;
- release)
- release="-$arg"
- prev=
-@@ -976,11 +1005,16 @@
- continue
- ;;
-
-+ -inst-prefix-dir)
-+ prev=inst_prefix
-+ continue
-+ ;;
-+
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
-- no/*-*-irix*)
-+ no/*-*-irix* | no/*-*-nonstopux*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
-@@ -1031,6 +1065,17 @@
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
-+ *-*-openbsd* | *-*-freebsd*)
-+ # Do not include libc due to us having libc/libc_r.
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ esac
-+ elif test "X$arg" = "X-lc_r"; then
-+ case $host in
-+ *-*-openbsd* | *-*-freebsd*)
-+ # Do not include libc_r directly, use -pthread flag.
-+ continue
-+ ;;
- esac
- fi
- deplibs="$deplibs $arg"
-@@ -1122,7 +1167,7 @@
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
-+ save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
-@@ -1140,7 +1185,7 @@
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
-+ save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
-@@ -1307,9 +1352,11 @@
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
-- case "$libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-- esac
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
- libs="$libs $deplib"
- done
- deplibs=
-@@ -1343,7 +1390,7 @@
- ;;
- esac
- for pass in $passes; do
-- if test "$linkmode" = prog; then
-+ if test $linkmode = prog; then
- # Determine which files to process
- case $pass in
- dlopen)
-@@ -1360,11 +1407,11 @@
- found=no
- case $deplib in
- -l*)
-- if test "$linkmode" = oldlib && test "$linkmode" = obj; then
-+ if test $linkmode = oldlib && test $linkmode = obj; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
- continue
- fi
-- if test "$pass" = conv; then
-+ if test $pass = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
-@@ -1384,7 +1431,7 @@
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
-- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-+ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
-@@ -1393,16 +1440,16 @@
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
-- test "$pass" = conv && continue
-+ test $pass = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
-- if test "$pass" = conv; then
-+ if test $pass = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
-- if test "$pass" = scan; then
-+ if test $pass = scan; then
- deplibs="$deplib $deplibs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- else
-@@ -1417,7 +1464,7 @@
- continue
- ;; # -L
- -R*)
-- if test "$pass" = link; then
-+ if test $pass = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
-@@ -1430,7 +1477,7 @@
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
-- if test "$pass" = conv; then
-+ if test $pass = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
-@@ -1438,10 +1485,12 @@
- lib)
- if test "$deplibs_check_method" != pass_all; then
- echo
-- echo "*** Warning: This library needs some functionality provided by $deplib."
-+ echo "*** Warning: Trying to link with static lib archive $deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because the file extensions .$libext of this argument makes me believe"
-+ echo "*** that it is just a static archive that I should not used here."
- else
- echo
- echo "*** Warning: Linking the shared library $output against the"
-@@ -1451,7 +1500,7 @@
- continue
- ;;
- prog)
-- if test "$pass" != link; then
-+ if test $pass != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
-@@ -1462,7 +1511,7 @@
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
-- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-+ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
-@@ -1485,7 +1534,7 @@
- fi
-
- # Check to see that this really is a libtool archive.
-- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
-@@ -1512,13 +1561,13 @@
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
-- { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
-+ { test $linkmode = oldlib && test $linkmode = obj; }; then
- # Add dl[pre]opened files of deplib
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
-- if test "$pass" = conv; then
-+ if test $pass = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
-@@ -1532,12 +1581,14 @@
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
-- case "$tmp_libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-- esac
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
- tmp_libs="$tmp_libs $deplib"
- done
-- elif test "$linkmode" != prog && test "$linkmode" != lib; then
-+ elif test $linkmode != prog && test $linkmode != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit 1
- fi
-@@ -1555,7 +1606,7 @@
- fi
-
- # This library was specified with -dlopen.
-- if test "$pass" = dlopen; then
-+ if test $pass = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit 1
-@@ -1604,7 +1655,7 @@
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
-- if test "$pass" = dlpreopen; then
-+ if test $pass = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit 1
-@@ -1623,7 +1674,7 @@
-
- if test -z "$libdir"; then
- # Link the convenience library
-- if test "$linkmode" = lib; then
-+ if test $linkmode = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
-@@ -1634,7 +1685,7 @@
- continue
- fi
-
-- if test "$linkmode" = prog && test "$pass" != link; then
-+ if test $linkmode = prog && test $pass != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
-@@ -1657,9 +1708,11 @@
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
-- case "$tmp_libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-- esac
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
-@@ -1671,7 +1724,7 @@
- # Link against this shared library
-
- if test "$linkmode,$pass" = "prog,link" ||
-- { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
-+ { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
-@@ -1693,7 +1746,7 @@
- esac
- ;;
- esac
-- if test "$linkmode" = prog; then
-+ if test $linkmode = prog; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
-@@ -1743,14 +1796,14 @@
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
-- soname=`echo $soroot | sed -e 's/^.*\///'`
-- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
-+ soname=`echo $soroot | ${SED} -e 's/^.*\///'`
-+ newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- eval cmds=\"$extract_expsyms_cmds\"
- for cmd in $cmds; do
- IFS="$save_ifs"
-@@ -1763,7 +1816,7 @@
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- eval cmds=\"$old_archive_from_expsyms_cmds\"
- for cmd in $cmds; do
- IFS="$save_ifs"
-@@ -1777,7 +1830,7 @@
- linklib=$newlib
- fi # test -n $old_archive_from_expsyms_cmds
-
-- if test "$linkmode" = prog || test "$mode" != relink; then
-+ if test $linkmode = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
-@@ -1804,6 +1857,14 @@
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
-+ # Try looking first in the location we're being installed to.
-+ if test -n "$inst_prefix_dir"; then
-+ case "$libdir" in
-+ [\/]*)
-+ add_dir="-L$inst_prefix_dir$libdir $add_dir"
-+ ;;
-+ esac
-+ fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
-@@ -1826,7 +1887,7 @@
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
-- if test "$linkmode" = prog; then
-+ if test $linkmode = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
-@@ -1843,7 +1904,7 @@
- fi
- fi
-
-- if test "$linkmode" = prog || test "$mode" = relink; then
-+ if test $linkmode = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
-@@ -1862,10 +1923,18 @@
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
-+ # Try looking first in the location we're being installed to.
-+ if test -n "$inst_prefix_dir"; then
-+ case "$libdir" in
-+ [\/]*)
-+ add_dir="-L$inst_prefix_dir$libdir $add_dir"
-+ ;;
-+ esac
-+ fi
- add="-l$name"
- fi
-
-- if test "$linkmode" = prog; then
-+ if test $linkmode = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
-@@ -1873,7 +1942,7 @@
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
-- elif test "$linkmode" = prog; then
-+ elif test $linkmode = prog; then
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
-@@ -1903,25 +1972,26 @@
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- echo
-- echo "*** Warning: This library needs some functionality provided by $lib."
-+ echo "*** Warning: This system can not link to static lib archive $lib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
-- echo "*** Therefore, libtool will create a static module, that should work "
-- echo "*** as long as the dlopening application is linked with the -dlopen flag."
-+ echo "*** But as you try to build a module library, libtool will still create "
-+ echo "*** a static module, that should work as long as the dlopening application"
-+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
-- echo
-- echo "*** However, this would only work if libtool was able to extract symbol"
-- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-- echo "*** not find such a program. So, this module is probably useless."
-- echo "*** \`nm' from GNU binutils and a full rebuild may help."
-+ echo
-+ echo "*** However, this would only work if libtool was able to extract symbol"
-+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ echo "*** not find such a program. So, this module is probably useless."
-+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
-- build_libtool_libs=module
-- build_old_libs=yes
-+ build_libtool_libs=module
-+ build_old_libs=yes
- else
-- build_libtool_libs=no
-+ build_libtool_libs=no
- fi
- fi
- else
-@@ -1932,9 +2002,9 @@
- fi
- fi # link shared/static library?
-
-- if test "$linkmode" = lib; then
-+ if test $linkmode = lib; then
- if test -n "$dependency_libs" &&
-- { test "$hardcode_into_libs" != yes || test $build_old_libs = yes ||
-+ { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
- test $link_static = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
-@@ -1958,13 +2028,15 @@
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
-- case "$tmp_libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-- esac
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
- tmp_libs="$tmp_libs $deplib"
- done
-
-- if test "$link_all_deplibs" != no; then
-+ if test $link_all_deplibs != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
-@@ -1986,7 +2058,7 @@
- if grep "^installed=no" $deplib > /dev/null; then
- path="-L$absdir/$objdir"
- else
-- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit 1
-@@ -2007,15 +2079,15 @@
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
-- if test "$pass" = dlpreopen; then
-+ if test $pass = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
-- if test "$pass" != dlopen; then
-- test "$pass" != scan && dependency_libs="$newdependency_libs"
-- if test "$pass" != conv; then
-+ if test $pass != dlopen; then
-+ test $pass != scan && dependency_libs="$newdependency_libs"
-+ if test $pass != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
-@@ -2073,7 +2145,7 @@
- deplibs=
- fi
- done # for pass
-- if test "$linkmode" = prog; then
-+ if test $linkmode = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-@@ -2175,7 +2247,7 @@
- else
-
- # Parse the version information argument.
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
-+ save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
-@@ -2250,16 +2322,21 @@
- versuffix=".$current";
- ;;
-
-- irix)
-+ irix | nonstopux)
- major=`expr $current - $age + 1`
-- verstring="sgi$major.$revision"
-+
-+ case $version_type in
-+ nonstopux) verstring_prefix=nonstopux ;;
-+ *) verstring_prefix=sgi ;;
-+ esac
-+ verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test $loop != 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
-- verstring="sgi$major.$iface:$verstring"
-+ verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
-@@ -2273,7 +2350,7 @@
- ;;
-
- osf)
-- major=`expr $current - $age`
-+ major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
-@@ -2312,6 +2389,16 @@
- if test -z "$vinfo" && test -n "$release"; then
- major=
- verstring="0.0"
-+ case $version_type in
-+ darwin)
-+ # we can't check for "0.0" in archive_cmds due to quoting
-+ # problems, so we reset it completely
-+ verstring=""
-+ ;;
-+ *)
-+ verstring="0.0"
-+ ;;
-+ esac
- if test "$need_version" = no; then
- versuffix=
- else
-@@ -2355,9 +2442,9 @@
-
- # Eliminate all temporary directories.
- for path in $notinst_path; do
-- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
-- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
-- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
-+ lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-+ deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-+ dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
- done
-
- if test -n "$xrpath"; then
-@@ -2408,9 +2495,12 @@
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
-+ *-*-openbsd* | *-*-freebsd*)
-+ # Do not include libc due to us having libc/libc_r.
-+ ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
-- if test "$build_libtool_need_lc" = "yes"; then
-+ if test $build_libtool_need_lc = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
-@@ -2466,18 +2556,20 @@
- else
- droppeddeps=yes
- echo
-- echo "*** Warning: This library needs some functionality provided by $i."
-+ echo "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ echo "*** shared version of the library, which I believe you do not have"
-+ echo "*** because a test_compile did reveal that the linker did not use it for"
-+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
-- # Error occured in the first compile. Let's try to salvage the situation:
-- # Compile a seperate program for each library.
-+ # Error occured in the first compile. Let's try to salvage
-+ # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
-@@ -2496,10 +2588,12 @@
- else
- droppeddeps=yes
- echo
-- echo "*** Warning: This library needs some functionality provided by $i."
-+ echo "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because a test_compile did reveal that the linker did not use this one"
-+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- else
- droppeddeps=yes
-@@ -2538,14 +2632,14 @@
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
-- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-- | sed 10q \
-+ | ${SED} 10q \
- | egrep "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
-@@ -2556,10 +2650,17 @@
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
-- echo "*** Warning: This library needs some functionality provided by $a_deplib."
-+ echo "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ echo "*** with $libname but no candidates were found. (...for file magic test)"
-+ else
-+ echo "*** with $libname and none of the candidates passed a file format test"
-+ echo "*** using a file magic. Last file checked: $potlib"
-+ fi
- fi
- else
- # Add a -L argument.
-@@ -2578,8 +2679,9 @@
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
-+ potlib="$potent_lib" # see symlink-check below in file_magic test
- if eval echo \"$potent_lib\" 2>/dev/null \
-- | sed 10q \
-+ | ${SED} 10q \
- | egrep "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
-@@ -2590,10 +2692,17 @@
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
-- echo "*** Warning: This library needs some functionality provided by $a_deplib."
-+ echo "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ echo "*** shared version of the library, which you do not appear to have"
-+ echo "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-+ else
-+ echo "*** with $libname and none of the candidates passed a file format test"
-+ echo "*** using a regex pattern. Last file checked: $potlib"
-+ fi
- fi
- else
- # Add a -L argument.
-@@ -2683,7 +2792,7 @@
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
-- if test "$hardcode_into_libs" = yes; then
-+ if test $hardcode_into_libs = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
-@@ -2784,7 +2893,7 @@
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- eval cmds=\"$export_symbols_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -2858,9 +2967,20 @@
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
- else
-+ save_deplibs="$deplibs"
-+ for conv in $convenience; do
-+ tmp_deplibs=
-+ for test_deplib in $deplibs; do
-+ if test "$test_deplib" != "$conv"; then
-+ tmp_deplibs="$tmp_deplibs $test_deplib"
-+ fi
-+ done
-+ deplibs="$tmp_deplibs"
-+ done
- eval cmds=\"$archive_cmds\"
-+ deplibs="$save_deplibs"
- fi
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -2988,7 +3108,7 @@
-
- output="$obj"
- eval cmds=\"$reload_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -3024,7 +3144,7 @@
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- eval cmds=\"$reload_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -3057,7 +3177,7 @@
-
- prog)
- case $host in
-- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
-+ *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-@@ -3079,6 +3199,13 @@
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ case $host in
-+ *darwin*)
-+ # Don't allow lazy linking, it breaks C++ global constructors
-+ compile_command="$compile_command ${wl}-bind_at_load"
-+ finalize_command="$finalize_command ${wl}-bind_at_load"
-+ ;;
-+ esac
- ;;
- esac
-
-@@ -3245,9 +3372,9 @@
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
- $run $rm $export_symbols
-- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-+ $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- else
-- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-+ $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- fi
-@@ -3255,7 +3382,7 @@
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
-- name=`echo "$arg" | sed -e 's%^.*/%%'`
-+ name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval 'echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-@@ -3270,7 +3397,13 @@
- fi
-
- # Try sorting and uniquifying the output.
-- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-+ if grep -v "^: " < "$nlist" |
-+ if sort -k 3 </dev/null >/dev/null 2>&1; then
-+ sort -k 3
-+ else
-+ sort +2
-+ fi |
-+ uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
-@@ -3287,27 +3420,25 @@
- #undef lt_preloaded_symbols
-
- #if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
-+# define lt_ptr void *
- #else
--# define lt_ptr_t char *
-+# define lt_ptr char *
- # define const
- #endif
-
- /* The mapping between symbol names and symbols. */
- const struct {
- const char *name;
-- lt_ptr_t address;
-+ lt_ptr address;
- }
- lt_preloaded_symbols[] =
- {\
- "
-
-- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
-- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
-- < "$nlist" >> "$output_objdir/$dlsyms"
-+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
-- {0, (lt_ptr_t) 0}
-+ {0, (lt_ptr) 0}
- };
-
- /* This works around a problem in FreeBSD linker */
-@@ -3494,7 +3625,7 @@
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
-- relink_command="cd `pwd`; $relink_command"
-+ relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
-@@ -3514,7 +3645,7 @@
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
-- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
-+ *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
-@@ -3538,7 +3669,7 @@
-
- # Sed substitution that helps us do robust quoting. It backslashifies
- # metacharacters that are still active within double-quoted strings.
--Xsed='sed -e 1s/^X//'
-+Xsed="${SED}"' -e 1s/^X//'
- sed_quote_subst='$sed_quote_subst'
-
- # The HP-UX ksh and POSIX shell print the target directory to stdout
-@@ -3576,7 +3707,7 @@
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
-- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
-+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-@@ -3589,7 +3720,7 @@
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
-+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
-@@ -3603,7 +3734,7 @@
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
-- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
-+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-@@ -3618,8 +3749,9 @@
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
-- if (eval \$relink_command); then :
-+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
-+ $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit 1
- fi
-@@ -3648,7 +3780,7 @@
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
-- # The second colon is a workaround for a bug in BeOS R4 sed
-+ # The second colon is a workaround for a bug in BeOS R4 ${SED}
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-@@ -3790,7 +3922,7 @@
-
- eval cmds=\"$old_archive_cmds\"
- fi
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -3823,7 +3955,7 @@
- fi
- done
- # Quote the link command for shipping.
-- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
-+ relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-
- # Only create the output if not a dry run.
-@@ -3840,7 +3972,7 @@
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit 1
-@@ -3854,7 +3986,7 @@
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
-@@ -3865,7 +3997,7 @@
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
-@@ -4089,7 +4221,7 @@
-
- *.la)
- # Check to see that this really is a libtool archive.
-- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
-@@ -4124,12 +4256,30 @@
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
-+ # Determine the prefix the user has applied to our future dir.
-+ inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
-+
-+ # Don't allow the user to place us outside of our expected
-+ # location b/c this prevents finding dependent libraries that
-+ # are installed to the same prefix.
-+ if test "$inst_prefix_dir" = "$destdir"; then
-+ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ exit 1
-+ fi
-+
-+ if test -n "$inst_prefix_dir"; then
-+ # Stick the inst_prefix_dir data into the link command.
-+ relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-+ else
-+ relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
-+ fi
-+
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-- continue
-+ exit 1
- fi
- fi
-
-@@ -4165,7 +4315,7 @@
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- eval cmds=\"$postinstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -4238,19 +4388,27 @@
- fi
-
- # Do a test to see if this is really a libtool program.
-- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ case $host in
-+ *cygwin*|*mingw*)
-+ wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
-+ ;;
-+ *)
-+ wrapper=$file
-+ ;;
-+ esac
-+ if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # If there is no directory component, then add one.
- case $file in
-- */* | *\\*) . $file ;;
-- *) . ./$file ;;
-+ */* | *\\*) . $wrapper ;;
-+ *) . ./$wrapper ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
-- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit 1
- fi
-
-@@ -4275,8 +4433,8 @@
- relink_command=
- # If there is no directory component, then add one.
- case $file in
-- */* | *\\*) . $file ;;
-- *) . ./$file ;;
-+ */* | *\\*) . $wrapper ;;
-+ *) . ./$wrapper ;;
- esac
-
- outputname=
-@@ -4324,7 +4482,7 @@
- destfile=$destfile.exe
- ;;
- *:*.exe)
-- destfile=`echo $destfile | sed -e 's,.exe$,,'`
-+ destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
-@@ -4352,7 +4510,7 @@
-
- # Do each command in the postinstall commands.
- eval cmds=\"$old_postinstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -4368,11 +4526,10 @@
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
-- exec $SHELL $0 --finish$current_libdirs
-- exit 1
-+ exec_cmd='$SHELL $0 --finish$current_libdirs'
-+ else
-+ exit 0
- fi
--
-- exit 0
- ;;
-
- # libtool finish mode
-@@ -4391,7 +4548,7 @@
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- eval cmds=\"$finish_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -4473,7 +4630,7 @@
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
-- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
-@@ -4544,7 +4701,7 @@
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
-- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
-@@ -4575,11 +4732,8 @@
- LANG="$save_LANG"; export LANG
- fi
-
-- # Now actually exec the command.
-- eval "exec \$cmd$args"
--
-- $echo "$modename: cannot exec \$cmd$args"
-- exit 1
-+ # Now prepare to actually exec the command.
-+ exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
-@@ -4641,14 +4795,14 @@
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
-- || (test -h "$file") >/dev/null 2>&1 \
-+ || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
-- :
-+ :
- elif test -d "$file"; then
-- exit_status=1
-+ exit_status=1
- continue
- elif test "$rmforce" = yes; then
-- continue
-+ continue
- fi
-
- rmfiles="$file"
-@@ -4656,7 +4810,7 @@
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
-- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
-@@ -4670,7 +4824,7 @@
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -4685,7 +4839,7 @@
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
-@@ -4711,7 +4865,7 @@
- *)
- # Do a test to see if this is a libtool program.
- if test $mode = clean &&
-- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$file
-
-@@ -4744,11 +4898,18 @@
- ;;
- esac
-
-- $echo "$modename: invalid operation mode \`$mode'" 1>&2
-- $echo "$generic_help" 1>&2
-- exit 1
-+ if test -z "$exec_cmd"; then
-+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
-+ $echo "$generic_help" 1>&2
-+ exit 1
-+ fi
- fi # test -z "$show_help"
-
-+if test -n "$exec_cmd"; then
-+ eval exec $exec_cmd
-+ exit 1
-+fi
-+
- # We need to display help for each of the modes.
- case $mode in
- "") $echo \
---- linux-atm-2.4.1.orig/m4/Makefile.in
-+++ linux-atm-2.4.1/m4/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -92,14 +92,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps m4/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -112,6 +112,11 @@
- subdir = m4
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu m4/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/Makefile.in
-+++ linux-atm-2.4.1/src/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -85,8 +85,7 @@
- VERSION = @VERSION@
- YACC = @YACC@
-
--SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
-- mpoad switch config extra
-+SUBDIRS = include lib
-
- mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
- CONFIG_HEADER = ../config.h
-@@ -96,14 +95,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -186,7 +185,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -202,6 +201,11 @@
- subdir = src
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/include/Makefile.in
-+++ linux-atm-2.4.1/src/include/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -97,14 +97,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/include/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/include/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -142,7 +142,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -158,6 +158,11 @@
- subdir = src/include
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/include/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/include/atmd.h
-+++ linux-atm-2.4.1/src/include/atmd.h
-@@ -24,6 +24,10 @@
- (i)->prev = (b)->prev; if ((b)->prev) (b)->prev->next = i; else r = i; \
- (b)->prev = i; } else { (i)->next = r; (i)->prev = NULL; \
- if (r) (r)->prev = i; r = i; } })
-+#define Q_INSERT_BEFORE_TYPED(r,t,i,b) ({ if (b) { (i)->next = b; \
-+ (i)->prev = (b)->prev; if ((b)->prev) (b)->prev->next = i; else r = i; \
-+ (b)->prev = i; } else { (i)->next = t r; (i)->prev = NULL; \
-+ if (t r) (t r)->prev = i; r = i; } })
- #define Q_REMOVE(r,i) ({ if ((i)->next) (i)->next->prev = (i)->prev; \
- if ((i)->prev) (i)->prev->next = (i)->next; else r = (i)->next; })
-
---- linux-atm-2.4.1.orig/src/lib/Makefile.in
-+++ linux-atm-2.4.1/src/lib/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -92,16 +92,10 @@
- # ATMLIBS_VERSION comes from configure.in in the toplevel directory
- LDFLAGS = -version-info @LIBVER_CURRENT@:@LIBVER_REVISION@:@LIBVER_AGE@
-
--libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c \
-- qos2text.c qosequal.c sap2text.c text2sap.c sapequal.c \
-- misc.c atmres.h ans.c \
-- common.c diag.c kptr.c text2ip.c timer.c unix.c
-+libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c qos2text.c qosequal.c sap2text.c text2sap.c sapequal.c misc.c atmres.h ans.c common.c diag.c kptr.c text2ip.c timer.c unix.c
-
- libatm_la_LIBADD = -lresolv
--libatm_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h \
-- $(top_builddir)/src/include/atmsap.h \
-- $(top_builddir)/src/include/stdint.h \
-- $(top_builddir)/src/include/atmd.h
-+libatm_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h $(top_builddir)/src/include/atmsap.h $(top_builddir)/src/include/stdint.h $(top_builddir)/src/include/atmd.h
-
- mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
- CONFIG_HEADER = ../../config.h
-@@ -126,8 +120,13 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/ans.P .deps/atm2text.P .deps/atmequal.P \
-+.deps/common.P .deps/diag.P .deps/kptr.P .deps/misc.P .deps/qos2text.P \
-+.deps/qosequal.P .deps/sap2text.P .deps/sapequal.P .deps/sdu2cell.P \
-+.deps/text2atm.P .deps/text2ip.P .deps/text2qos.P .deps/text2sap.P \
-+.deps/timer.P .deps/unix.P
- SOURCES = $(libatm_la_SOURCES)
- OBJECTS = $(libatm_la_OBJECTS)
-
-@@ -135,9 +134,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/lib/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lib/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -167,9 +166,6 @@
- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -192,9 +188,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -232,7 +225,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -248,6 +241,11 @@
- subdir = src/lib
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/lib/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -258,48 +256,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--ans.lo ans.o : ans.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h atmres.h
--atm2text.lo atm2text.o : atm2text.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h atmres.h
--atmequal.lo atmequal.o : atmequal.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h
--common.lo common.o : common.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atmd.h ../../src/include/atm.h
--diag.lo diag.o : diag.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h
--kptr.lo kptr.o : kptr.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h
--misc.lo misc.o : misc.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmsap.h
--qos2text.lo qos2text.o : qos2text.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h
--qosequal.lo qosequal.o : qosequal.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h
--sap2text.lo sap2text.o : sap2text.c ../../config.h \
-- ../../src/include/atmsap.h ../../src/include/stdint.h \
-- ../../src/include/atm.h
--sapequal.lo sapequal.o : sapequal.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h
--sdu2cell.lo sdu2cell.o : sdu2cell.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h
--text2atm.lo text2atm.o : text2atm.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h atmres.h
--text2ip.lo text2ip.o : text2ip.c ../../config.h \
-- ../../src/include/stdint.h ../../src/include/atm.h \
-- ../../src/include/atmd.h
--text2qos.lo text2qos.o : text2qos.c ../../config.h \
-- ../../src/include/atm.h ../../src/include/stdint.h
--text2sap.lo text2sap.o : text2sap.c ../../config.h \
-- ../../src/include/atmsap.h ../../src/include/stdint.h \
-- ../../src/include/atm.h
--timer.lo timer.o : timer.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h
--unix.lo unix.o : unix.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -337,27 +325,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-libLTLIBRARIES distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -369,12 +357,13 @@
- distclean-compile clean-compile maintainer-clean-compile \
- mostlyclean-libtool distclean-libtool clean-libtool \
- maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
--clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
--check-am installcheck-am installcheck install-exec-am install-exec \
--install-data-am install-data install-am install uninstall-am uninstall \
--all-redirect all-am all installdirs mostlyclean-generic \
--distclean-generic clean-generic maintainer-clean-generic clean \
--mostlyclean distclean maintainer-clean
-+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-+distclean-depend clean-depend maintainer-clean-depend info-am info \
-+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-+install-exec install-data-am install-data install-am install \
-+uninstall-am uninstall all-redirect all-am all installdirs \
-+mostlyclean-generic distclean-generic clean-generic \
-+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
- #libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c \
---- linux-atm-2.4.1.orig/src/lib/sapequal.c
-+++ linux-atm-2.4.1/src/lib/sapequal.c
-@@ -65,6 +65,7 @@
- CHECK(l2.itu.window,a.l2.itu.window > b.l2.itu.window);
- break;
- default:
-+ break;
- }
- switch (a.l3_proto) {
- case ATM_L3_X25:
-@@ -83,6 +84,7 @@
- if (a.l3.user != b.l3.user) return 0;
- break;
- default:
-+ break;
- }
- return 1;
- }
---- linux-atm-2.4.1.orig/src/test/Makefile.in
-+++ linux-atm-2.4.1/src/test/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -168,8 +168,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/align.P .deps/aping.P .deps/aread.P .deps/awrite.P \
-+.deps/br.P .deps/bw.P .deps/isp.P .deps/ispl_l.P .deps/ispl_y.P \
-+.deps/ttcp.P .deps/window.P
- SOURCES = $(aread_SOURCES) $(awrite_SOURCES) $(ttcp_atm_SOURCES) $(align_SOURCES) $(aping_SOURCES) $(br_SOURCES) $(bw_SOURCES) $(isp_SOURCES) $(window_SOURCES)
- OBJECTS = $(aread_OBJECTS) $(awrite_OBJECTS) $(ttcp_atm_OBJECTS) $(align_OBJECTS) $(aping_OBJECTS) $(br_OBJECTS) $(bw_OBJECTS) $(isp_OBJECTS) $(window_OBJECTS)
-
-@@ -177,9 +180,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .l .lo .o .obj .s .y
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/test/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/test/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -218,9 +221,6 @@
-
- maintainer-clean-noinstPROGRAMS:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -243,9 +243,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -325,7 +322,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -341,6 +338,11 @@
- subdir = src/test
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/test/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -351,30 +353,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--align.o: align.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--aping.o: aping.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--aread.o: aread.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--awrite.o: awrite.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--br.o: br.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--bw.o: bw.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--isp.o: isp.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h isp.h \
-- errnos.inc
--ispl_l.o: ispl_l.c ../../config.h ../../src/include/stdint.h isp.h \
-- ../../src/include/atm.h ispl_y.h
--ispl_y.o: ispl_y.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h isp.h
--ttcp.o: ttcp.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmsap.h
--window.o: window.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -412,21 +422,22 @@
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
- maintainer-clean-generic:
-- -test -z "ispl_llispl_yhispl_yc" || rm -f ispl_ll ispl_yh ispl_yc
-+ -test -z "ispl_lcispl_yhispl_yc" || rm -f ispl_lc ispl_yh ispl_yc
- mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-noinstPROGRAMS \
- mostlyclean-compile mostlyclean-libtool \
-- mostlyclean-tags mostlyclean-generic
-+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-binPROGRAMS clean-noinstPROGRAMS clean-compile \
-- clean-libtool clean-tags clean-generic mostlyclean-am
-+ clean-libtool clean-tags clean-depend clean-generic \
-+ mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-binPROGRAMS distclean-noinstPROGRAMS \
- distclean-compile distclean-libtool distclean-tags \
-- distclean-generic clean-am
-+ distclean-depend distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-@@ -434,8 +445,8 @@
- maintainer-clean-am: maintainer-clean-binPROGRAMS \
- maintainer-clean-noinstPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -448,19 +459,22 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- isp.o: errnos.inc
-
- errnos.inc: mkerrnos.pl
-- @PERL@ ./mkerrnos.pl </usr/include/asm/errno.h \
-- >errnos.inc || { rm -f errnos.inc; exit 1; }
-+ cpp -I/usr/include/ -dM /usr/include/asm/errno.h | grep "^#define E" \
-+ | @PERL@ ./mkerrnos.pl | grep -v EMAXERRNO >errnos.inc \
-+ || { rm -f errnos.inc; exit 1; }
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
---- linux-atm-2.4.1.orig/src/test/Makefile.am
-+++ linux-atm-2.4.1/src/test/Makefile.am
-@@ -26,6 +26,7 @@
- isp.o: errnos.inc
-
- errnos.inc: mkerrnos.pl
-- @PERL@ ./mkerrnos.pl </usr/include/asm/errno.h \
-- >errnos.inc || { rm -f errnos.inc; exit 1; }
--
-+ cpp -I/usr/include/ -dM /usr/include/asm/errno.h | grep "^#define E" \
-+ | @PERL@ ./mkerrnos.pl | grep -v EMAXERRNO >errnos.inc \
-+ || { rm -f errnos.inc; exit 1; }
-+
---- linux-atm-2.4.1.orig/src/test/ttcp.c
-+++ linux-atm-2.4.1/src/test/ttcp.c
-@@ -55,6 +55,8 @@
- /* #define SYSV */ /* required on SGI IRIX releases before 3.3 */
-
- #include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
- #include <signal.h>
- #include <ctype.h>
- #include <errno.h>
-@@ -67,6 +69,7 @@
- #include <sys/time.h> /* struct timeval */
- #include <atm.h>
- #include <atmsap.h>
-+#include <unistd.h>
-
- #if defined(SYSV)
- #include <sys/times.h>
-@@ -85,7 +88,8 @@
- struct sockaddr_atmsvc satm;
- struct atm_qos qos;
-
--int domain, fromlen;
-+int domain;
-+socklen_t fromlen;
- int fd; /* fd of network socket */
-
- int buflen = 8 * 1024; /* length of buffer */
-@@ -120,7 +124,6 @@
- static struct rusage ru0; /* Resource utilization at the start */
-
- struct hostent *addr;
--extern int errno;
- extern int optind;
- extern char *optarg;
-
-@@ -158,23 +161,21 @@
- unsigned long numCalls; /* # of I/O system calls */
- double cput, realt; /* user, real time (seconds) */
-
--void err();
--void mes();
--int pattern();
--void prep_timer();
--double read_timer();
--int Nread();
--int Nwrite();
--void delay();
--int mread();
--char *outfmt();
--static void prusage();
--static void tvadd();
--static void tvsub();
--static void psecs();
-+void err(const char *s);
-+void mes(const char *s);
-+void prep_timer(void);
-+void pattern(char *cp, int cnt);
-+int Nread(int nfd, char *Nbuf, int count);
-+int Nwrite(int nfd, char *Nbuf, int count);
-+void delay(int us);
-+int mread(int mfd, char *bufp, unsigned n);
-+char *outfmt(double b);
-+static void prusage(struct rusage *r0, struct rusage *r1, struct timeval *e, struct timeval *b, char *outp);
-+static void tvadd(struct timeval *tsum, struct timeval *t0, struct timeval *t1);
-+static void tvsub(struct timeval *tdiff, struct timeval *t1, struct timeval *t0);
-+static void psecs(long l, char *cp);
-
--void
--sigpipe()
-+void sigpipe(int unused)
- {
- }
-
-@@ -183,16 +184,14 @@
- * main -
- *-------------------------------------------------------------------------
- */
--main(argc,argv)
--int argc;
--char **argv;
-+int main(int argc,char **argv)
- {
- struct timeval td;
- unsigned long addr_tmp;
- const char *port_name = NULL,*tos = NULL;
- int c;
- double mbps;
--int no_check = 0;
-+ int no_check = 0;
-
- if (argc < 2) goto usage;
-
-@@ -275,7 +274,7 @@
- }
- }
-
-- if (port_name)
-+ if (port_name) {
- if (atm) goto usage;
- else {
- struct servent *se;
-@@ -283,13 +282,13 @@
- se = getservbyname(port_name,udp ? "udp" : "tcp");
- if (se) port = ntohs(se->s_port);
- else {
-- const char *end;
-+ char *end;
-
- port = strtoul(port_name,&end,0);
- if (*end) goto usage;
- }
- }
--
-+ }
- host = argv[optind];
-
- if (atm) {
-@@ -435,9 +434,9 @@
- #endif
-
- if (!atm || satm.sas_family == AF_ATMPVC || !trans)
-- if (bind(fd, atm ? &satm : &sinme, atm ? satm.sas_family == AF_ATMPVC ?
-- sizeof(struct sockaddr_atmpvc) : sizeof(struct sockaddr_atmsvc) :
-- sizeof(sinme)) < 0)
-+ if (bind(fd, atm ?
-+ (struct sockaddr *)&satm : (struct sockaddr *)&sinme,
-+ atm ? satm.sas_family == AF_ATMPVC ? sizeof(struct sockaddr_atmpvc) : sizeof(struct sockaddr_atmsvc) : sizeof(sinme)) < 0)
- err("bind");
-
- if (!udp || (atm && satm.sas_family == AF_ATMSVC)) {
-@@ -453,8 +452,8 @@
- err("setsockopt");
- }
-
-- if (connect(fd, atm ? &satm : &sinhim, atm ? sizeof(satm) :
-- sizeof(sinhim)) < 0)
-+ if (connect(fd,
-+ atm ? (struct sockaddr *)&satm : (struct sockaddr *)&sinhim, atm ? sizeof(satm) : sizeof(sinhim)) < 0)
- err("connect");
-
- mes("connect");
-@@ -482,13 +481,13 @@
- fromlen = sizeof(frominet);
- domain = AF_INET;
-
-- if ((fd=accept(fd, &frominet, &fromlen) ) < 0)
-+ if ((fd=accept(fd, (struct sockaddr *)&frominet, &fromlen) ) < 0)
- err("accept");
-
- {
- struct sockaddr_atmsvc peer;
- int peerlen = sizeof(peer);
-- if (getpeername(fd, (struct sockaddr_in *) &peer,
-+ if (getpeername(fd, (struct sockaddr *) &peer,
- &peerlen) < 0) {
- err("getpeername");
- }
-@@ -638,13 +637,13 @@
- nbytes, cput, outfmt((double)nbytes/cput));
-
- fprintf(stdout,
-- "ttcp%s: %d I/O calls, msec/call = %.2f, calls/sec = %.2f\n",
-+ "ttcp%s: %lu I/O calls, msec/call = %.2f, calls/sec = %.2f\n",
- trans?"-t":"-r",
- numCalls,
- 1000.0 * realt/((double)numCalls),
- ((double)numCalls)/realt);
- fprintf(stdout,
-- "ttcp%s: buffer address %#x\n",
-+ "ttcp%s: buffer address %p\n",
- trans?"-t":"-r",
- buf);
- }
-@@ -656,8 +655,7 @@
- }
-
- void
--err(s)
--char *s;
-+err(const char *s)
- {
- int en = errno;
-
-@@ -670,8 +668,7 @@
- }
-
- void
--mes(s)
--char *s;
-+mes(const char *s)
- {
- fprintf(stderr,"ttcp%s: %s\n", trans?"-t":"-r", s);
- }
-@@ -681,9 +678,7 @@
- * pattern -
- *-------------------------------------------------------------------------
- */
--pattern(cp, cnt)
--register char *cp;
--register int cnt;
-+void pattern(char *cp, int cnt)
- {
- register char c;
- c = 0;
-@@ -694,9 +689,7 @@
- }
-
-
--char *
--outfmt(b)
--double b;
-+char *outfmt(double b)
- {
- static char obuf[50];
- switch (fmt) {
-@@ -758,7 +751,7 @@
- * P R E P _ T I M E R
- */
- void
--prep_timer()
-+prep_timer(void)
- {
- gettimeofday(&start_time, (struct timezone *)0);
- getrusage(RUSAGE_SELF, &ru0);
-@@ -768,8 +761,7 @@
- * read_timer -
- *-------------------------------------------------------------------------
- */
--double read_timer(str,len)
--char *str;
-+double read_timer(char *str,int len)
- {
- struct rusage ru1;
- struct timeval tend, tstart, td;
-@@ -788,15 +780,11 @@
- return( cput );
- }
-
--static void
--prusage(r0, r1, e, b, outp)
-- register struct rusage *r0, *r1;
-- struct timeval *e, *b;
-- char *outp;
-+static void prusage(struct rusage *r0, struct rusage *r1, struct timeval *e, struct timeval *b, char *outp)
- {
- struct timeval tdiff;
- register time_t t;
-- register char *cp;
-+ register const char *cp;
- register int i;
- int ms;
-
-@@ -823,13 +811,13 @@
-
- case 'U':
- tvsub(&tdiff, &r1->ru_utime, &r0->ru_utime);
-- sprintf(outp,"%d.%01d", tdiff.tv_sec, tdiff.tv_usec/100000);
-+ sprintf(outp,"%ld.%01ld", tdiff.tv_sec, tdiff.tv_usec/100000);
- END(outp);
- break;
-
- case 'S':
- tvsub(&tdiff, &r1->ru_stime, &r0->ru_stime);
-- sprintf(outp,"%d.%01d", tdiff.tv_sec, tdiff.tv_usec/100000);
-+ sprintf(outp,"%ld.%01ld", tdiff.tv_sec, tdiff.tv_usec/100000);
- END(outp);
- break;
-
-@@ -851,49 +839,49 @@
- break;
-
- case 'X':
-- sprintf(outp,"%d", t == 0 ? 0 : (r1->ru_ixrss-r0->ru_ixrss)/t);
-+ sprintf(outp,"%ld", t == 0 ? 0 : (r1->ru_ixrss-r0->ru_ixrss)/t);
- END(outp);
- break;
-
- case 'D':
-- sprintf(outp,"%d", t == 0 ? 0 :
-+ sprintf(outp,"%ld", t == 0 ? 0 :
- (r1->ru_idrss+r1->ru_isrss-(r0->ru_idrss+r0->ru_isrss))/t);
- END(outp);
- break;
-
- case 'K':
-- sprintf(outp,"%d", t == 0 ? 0 :
-+ sprintf(outp,"%ld", t == 0 ? 0 :
- ((r1->ru_ixrss+r1->ru_isrss+r1->ru_idrss) -
- (r0->ru_ixrss+r0->ru_idrss+r0->ru_isrss))/t);
- END(outp);
- break;
-
- case 'M':
-- sprintf(outp,"%d", r1->ru_maxrss/2);
-+ sprintf(outp,"%ld", r1->ru_maxrss/2);
- END(outp);
- break;
-
- case 'F':
-- sprintf(outp,"%d", r1->ru_majflt-r0->ru_majflt);
-+ sprintf(outp,"%ld", r1->ru_majflt-r0->ru_majflt);
- END(outp);
- break;
-
- case 'R':
-- sprintf(outp,"%d", r1->ru_minflt-r0->ru_minflt);
-+ sprintf(outp,"%ld", r1->ru_minflt-r0->ru_minflt);
- END(outp);
- break;
-
- case 'I':
-- sprintf(outp,"%d", r1->ru_inblock-r0->ru_inblock);
-+ sprintf(outp,"%ld", r1->ru_inblock-r0->ru_inblock);
- END(outp);
- break;
-
- case 'O':
-- sprintf(outp,"%d", r1->ru_oublock-r0->ru_oublock);
-+ sprintf(outp,"%ld", r1->ru_oublock-r0->ru_oublock);
- END(outp);
- break;
- case 'C':
-- sprintf(outp,"%d+%d", r1->ru_nvcsw-r0->ru_nvcsw,
-+ sprintf(outp,"%ld+%ld", r1->ru_nvcsw-r0->ru_nvcsw,
- r1->ru_nivcsw-r0->ru_nivcsw );
- END(outp);
- break;
-@@ -903,9 +891,7 @@
- *outp = '\0';
- }
-
--static void
--tvadd(tsum, t0, t1)
-- struct timeval *tsum, *t0, *t1;
-+static void tvadd(struct timeval *tsum, struct timeval *t0, struct timeval *t1)
- {
-
- tsum->tv_sec = t0->tv_sec + t1->tv_sec;
-@@ -919,8 +905,7 @@
- * tvsub - tdiff = t1 - t0
- *-------------------------------------------------------------------------
- */
--static void tvsub(tdiff, t1, t0)
-- struct timeval *tdiff, *t1, *t0;
-+static void tvsub(struct timeval *tdiff, struct timeval *t1, struct timeval *t0)
- {
-
- tdiff->tv_sec = t1->tv_sec - t0->tv_sec;
-@@ -931,10 +916,7 @@
- }
- }
-
--static void
--psecs(l,cp)
--long l;
--register char *cp;
-+static void psecs(long l, char *cp)
- {
- register int i;
-
-@@ -958,26 +940,23 @@
- /*
- * N R E A D
- */
--Nread( fd, buf, count )
--int fd;
--char *buf;
--int count;
-+int Nread( int nfd, char *Nbuf, int count )
- {
- struct sockaddr_in from;
- int len = sizeof(from);
- register int cnt;
- if( udp ) {
- #if 0
-- cnt = recvfrom( fd, buf, count, 0, &from, &len );
-+ cnt = recvfrom( nfd, Nbuf, count, 0, &from, &len );
- #else
-- cnt = recv( fd, buf, count, 0);
-+ cnt = recv( nfd, Nbuf, count, 0);
- #endif
- numCalls++;
- } else {
- if( b_flag )
-- cnt = mread( fd, buf, count ); /* fill buf */
-+ cnt = mread( nfd, Nbuf, count ); /* fill buf */
- else {
-- cnt = read( fd, buf, count );
-+ cnt = read( nfd, Nbuf, count );
- numCalls++;
- }
- if (touchdata && cnt > 0) {
-@@ -994,17 +973,15 @@
- * Nwrite -
- *-------------------------------------------------------------------------
- */
--Nwrite(fd, buf, count)
--int fd;
--char *buf;
--int count;
-+int Nwrite(int nfd, char *Nbuf, int count)
- {
- register int cnt;
-
- if (udp) {
- again:
-- if (atm) cnt = write(fd, buf, count);
-- else cnt = sendto(fd, buf, count, 0, &sinhim, sizeof(sinhim));
-+ if (atm) cnt = write(nfd, Nbuf, count);
-+ else cnt = sendto(nfd, Nbuf, count, 0, (struct sockaddr *)&sinhim,
-+ sizeof(sinhim));
- numCalls++;
- if ( cnt<0 && errno == ENOBUFS ) {
- delay(18000);
-@@ -1012,7 +989,7 @@
- goto again;
- }
- } else {
-- cnt = write(fd, buf, count);
-+ cnt = write(nfd, Nbuf, count);
- numCalls++;
- }
- if (cnt < 0) perror("WA:write");
-@@ -1020,13 +997,13 @@
- }
-
- void
--delay(us)
-+delay(int us)
- {
- struct timeval tv;
-
- tv.tv_sec = 0;
- tv.tv_usec = us;
-- (void)select( 1, (char *)0, (char *)0, (char *)0, &tv );
-+ (void)select( 1, NULL, NULL, NULL, &tv );
- }
-
- /*
-@@ -1038,17 +1015,13 @@
- * network connections don't deliver data with the same
- * grouping as it is written with. Written by Robert S. Miles, BRL.
- */
--int
--mread(fd, bufp, n)
--int fd;
--register char *bufp;
--unsigned n;
-+int mread(int mfd, char *bufp, unsigned n)
- {
- register unsigned count = 0;
- register int nread;
-
- do {
-- nread = read(fd, bufp, n-count);
-+ nread = read(mfd, bufp, n-count);
- numCalls++;
- if(nread < 0) {
- perror("ttcp_mread");
---- linux-atm-2.4.1.orig/src/debug/Makefile.in
-+++ linux-atm-2.4.1/src/debug/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -129,8 +129,9 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/delay.P .deps/svctor.P
- SOURCES = $(delay_SOURCES) $(svctor_SOURCES)
- OBJECTS = $(delay_OBJECTS) $(svctor_OBJECTS)
-
-@@ -138,9 +139,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/debug/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/debug/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -154,9 +155,6 @@
-
- maintainer-clean-noinstPROGRAMS:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -179,9 +177,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -224,7 +219,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -240,6 +235,11 @@
- subdir = src/debug
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/debug/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -250,11 +250,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--delay.o: delay.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--svctor.o: svctor.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -291,27 +318,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-noinstPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -322,12 +349,14 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/qgen/Makefile.in
-+++ linux-atm-2.4.1/src/qgen/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -88,8 +88,7 @@
- noinst_PROGRAMS = qgen q.dump # q40.out.o
- check_PROGRAMS = q.test
-
--qgen_SOURCES = common.c common.h file.c file.h first.c ql_y.y ql_l.l qgen.c \
-- qgen.h second.c third.c
-+qgen_SOURCES = common.c common.h file.c file.h first.c ql_y.y ql_l.l qgen.c qgen.h second.c third.c
-
- qgen_LDADD = -lfl
-
-@@ -108,17 +107,10 @@
-
- EXTRA_DIST = ql_y.h incl.pl mknl.pl msg.fmt TODO
-
--CLEANFILES = q.out.h q.out.c q.test.c qd.out.h qd.out.c qd.dump.c qd.test.c \
-- default.nl # q40.out.h q40.out.c q40.test.c
-+CLEANFILES = q.out.h q.out.c q.test.c qd.out.h qd.out.c qd.dump.c qd.test.c default.nl # q40.out.h q40.out.c q40.test.c
-
-
--NLS = atm_ai_msg atm_ai_ie atm_loc atm_cv atm_pu atm_na atm_cond atm_ie \
-- atm_msg atm_np atm_ton atm_sat atm_prs atm_scrn atm_vpa atm_poe \
-- q2931_cs atm_td atm_bc atm_tc atm_stc atm_upcc q2931_proto atm_flag \
-- atm_aalp atm_fd atm_tag atm_l2 atm_l3 atm_tt atm_mc atm_hl atm_imd \
-- atm_tdl atm_tni atm_nip atm_shi atm_oci atm_unfm atm_ofi atm_irs \
-- atm_it atm_lit atm_lsi atm_tcs atm_css atm_eqo atm_eqp atm_aap \
-- atm_asp atm_tor
-+NLS = atm_ai_msg atm_ai_ie atm_loc atm_cv atm_pu atm_na atm_cond atm_ie atm_msg atm_np atm_ton atm_sat atm_prs atm_scrn atm_vpa atm_poe q2931_cs atm_td atm_bc atm_tc atm_stc atm_upcc q2931_proto atm_flag atm_aalp atm_fd atm_tag atm_l2 atm_l3 atm_tt atm_mc atm_hl atm_imd atm_tdl atm_tni atm_nip atm_shi atm_oci atm_unfm atm_ofi atm_irs atm_it atm_lit atm_lsi atm_tcs atm_css atm_eqo atm_eqp atm_aap atm_asp atm_tor
-
- SYMFILES = uni.h $(shell @PERL@ incl.pl $(CFLAGS) linux/atmsap.h)
- mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-@@ -155,8 +147,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/common.P .deps/file.P .deps/first.P .deps/qgen.P \
-+.deps/ql_l.P .deps/ql_y.P .deps/qlib.P .deps/qtest.P .deps/second.P \
-+.deps/third.P
- SOURCES = $(q_test_SOURCES) $(qgen_SOURCES) $(q_dump_SOURCES) $(EXTRA_q_dump_SOURCES)
- OBJECTS = $(q_test_OBJECTS) $(qgen_OBJECTS) $(q_dump_OBJECTS)
-
-@@ -164,9 +159,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .l .lo .o .obj .s .y
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/qgen/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/qgen/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -189,9 +184,6 @@
-
- maintainer-clean-noinstPROGRAMS:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -214,9 +206,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -272,7 +261,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -288,6 +277,11 @@
- subdir = src/qgen
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/qgen/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -298,15 +292,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--common.o: common.c ../../config.h common.h
--file.o: file.c ../../config.h common.h file.h
--first.o: first.c ../../config.h common.h qgen.h file.h
--qgen.o: qgen.c ../../config.h common.h file.h qgen.h
--ql_l.o: ql_l.c ../../config.h common.h qgen.h ql_y.h
--ql_y.o: ql_y.c ../../config.h common.h qgen.h file.h
--second.o: second.c ../../config.h common.h qgen.h file.h
--third.o: third.c ../../config.h common.h qgen.h file.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -344,21 +361,22 @@
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
- maintainer-clean-generic:
-- -test -z "ql_llql_yhql_yc" || rm -f ql_ll ql_yh ql_yc
-+ -test -z "ql_lcql_yhql_yc" || rm -f ql_lc ql_yh ql_yc
- mostlyclean-am: mostlyclean-checkPROGRAMS mostlyclean-noinstPROGRAMS \
- mostlyclean-compile mostlyclean-libtool \
-- mostlyclean-tags mostlyclean-generic
-+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-checkPROGRAMS clean-noinstPROGRAMS clean-compile \
-- clean-libtool clean-tags clean-generic mostlyclean-am
-+ clean-libtool clean-tags clean-depend clean-generic \
-+ mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-checkPROGRAMS distclean-noinstPROGRAMS \
- distclean-compile distclean-libtool distclean-tags \
-- distclean-generic clean-am
-+ distclean-depend distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-@@ -366,8 +384,8 @@
- maintainer-clean-am: maintainer-clean-checkPROGRAMS \
- maintainer-clean-noinstPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -380,12 +398,14 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- default.nl: mknl.pl $(SYMFILES)
---- linux-atm-2.4.1.orig/src/qgen/ql_l.c
-+++ linux-atm-2.4.1/src/qgen/ql_l.c
-@@ -1,32 +1,85 @@
--/* A lexical scanner generated by flex */
-
--/* Scanner skeleton version:
-- * $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 96/09/10 16:58:48 vern Exp $
-- */
-+#line 3 "lex.yy.c"
-+
-+#define YY_INT_ALIGNED short int
-+
-+/* A lexical scanner generated by flex */
-
- #define FLEX_SCANNER
- #define YY_FLEX_MAJOR_VERSION 2
- #define YY_FLEX_MINOR_VERSION 5
-+#define YY_FLEX_SUBMINOR_VERSION 31
-+#if YY_FLEX_SUBMINOR_VERSION > 0
-+#define FLEX_BETA
-+#endif
-
-+/* First, we deal with platform-specific or compiler-specific issues. */
-+
-+/* begin standard C headers. */
- #include <stdio.h>
--#include <unistd.h>
-+#include <string.h>
-+#include <errno.h>
-+#include <stdlib.h>
-
-+/* end standard C headers. */
-
--/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
--#ifdef c_plusplus
--#ifndef __cplusplus
--#define __cplusplus
-+/* flex integer type definitions */
-+
-+#ifndef FLEXINT_H
-+#define FLEXINT_H
-+
-+/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-+
-+#if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
-+#include <inttypes.h>
-+typedef int8_t flex_int8_t;
-+typedef uint8_t flex_uint8_t;
-+typedef int16_t flex_int16_t;
-+typedef uint16_t flex_uint16_t;
-+typedef int32_t flex_int32_t;
-+typedef uint32_t flex_uint32_t;
-+#else
-+typedef signed char flex_int8_t;
-+typedef short int flex_int16_t;
-+typedef int flex_int32_t;
-+typedef unsigned char flex_uint8_t;
-+typedef unsigned short int flex_uint16_t;
-+typedef unsigned int flex_uint32_t;
-+#endif /* ! C99 */
-+
-+/* Limits of integral types. */
-+#ifndef INT8_MIN
-+#define INT8_MIN (-128)
-+#endif
-+#ifndef INT16_MIN
-+#define INT16_MIN (-32767-1)
-+#endif
-+#ifndef INT32_MIN
-+#define INT32_MIN (-2147483647-1)
- #endif
-+#ifndef INT8_MAX
-+#define INT8_MAX (127)
-+#endif
-+#ifndef INT16_MAX
-+#define INT16_MAX (32767)
-+#endif
-+#ifndef INT32_MAX
-+#define INT32_MAX (2147483647)
-+#endif
-+#ifndef UINT8_MAX
-+#define UINT8_MAX (255U)
-+#endif
-+#ifndef UINT16_MAX
-+#define UINT16_MAX (65535U)
-+#endif
-+#ifndef UINT32_MAX
-+#define UINT32_MAX (4294967295U)
- #endif
-
-+#endif /* ! FLEXINT_H */
-
- #ifdef __cplusplus
-
--#include <stdlib.h>
--
--/* Use prototypes in function declarations. */
--#define YY_USE_PROTOS
--
- /* The "const" storage-class-modifier is valid. */
- #define YY_USE_CONST
-
-@@ -34,34 +87,17 @@
-
- #if __STDC__
-
--#define YY_USE_PROTOS
- #define YY_USE_CONST
-
- #endif /* __STDC__ */
- #endif /* ! __cplusplus */
-
--#ifdef __TURBOC__
-- #pragma warn -rch
-- #pragma warn -use
--#include <io.h>
--#include <stdlib.h>
--#define YY_USE_CONST
--#define YY_USE_PROTOS
--#endif
--
- #ifdef YY_USE_CONST
- #define yyconst const
- #else
- #define yyconst
- #endif
-
--
--#ifdef YY_USE_PROTOS
--#define YY_PROTO(proto) proto
--#else
--#define YY_PROTO(proto) ()
--#endif
--
- /* Returned upon end-of-file. */
- #define YY_NULL 0
-
-@@ -76,71 +112,71 @@
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
--#define BEGIN yy_start = 1 + 2 *
-+#define BEGIN (yy_start) = 1 + 2 *
-
- /* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
--#define YY_START ((yy_start - 1) / 2)
-+#define YY_START (((yy_start) - 1) / 2)
- #define YYSTATE YY_START
-
- /* Action number for EOF rule of a given start state. */
- #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
- /* Special action meaning "start processing a new file". */
--#define YY_NEW_FILE yyrestart( yyin )
-+#define YY_NEW_FILE yyrestart(yyin )
-
- #define YY_END_OF_BUFFER_CHAR 0
-
- /* Size of default input buffer. */
-+#ifndef YY_BUF_SIZE
- #define YY_BUF_SIZE 16384
-+#endif
-
-+#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-+#define YY_TYPEDEF_YY_BUFFER_STATE
- typedef struct yy_buffer_state *YY_BUFFER_STATE;
-+#endif
-
- extern int yyleng;
-+
- extern FILE *yyin, *yyout;
-
- #define EOB_ACT_CONTINUE_SCAN 0
- #define EOB_ACT_END_OF_FILE 1
- #define EOB_ACT_LAST_MATCH 2
-
--/* The funky do-while in the following #define is used to turn the definition
-- * int a single C statement (which needs a semi-colon terminator). This
-- * avoids problems with code like:
-- *
-- * if ( condition_holds )
-- * yyless( 5 );
-- * else
-- * do_something_else();
-- *
-- * Prior to using the do-while the compiler would get upset at the
-- * "else" because it interpreted the "if" statement as being all
-- * done when it reached the ';' after the yyless() call.
-- */
--
--/* Return all but the first 'n' matched characters back to the input stream. */
--
-+ #define YY_LESS_LINENO(n)
-+
-+/* Return all but the first "n" matched characters back to the input stream. */
- #define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
-- *yy_cp = yy_hold_char; \
-+ int yyless_macro_arg = (n); \
-+ YY_LESS_LINENO(yyless_macro_arg);\
-+ *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
-- yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
-+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up yytext again */ \
- } \
- while ( 0 )
-
--#define unput(c) yyunput( c, yytext_ptr )
-+#define unput(c) yyunput( c, (yytext_ptr) )
-
- /* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
--typedef unsigned int yy_size_t;
-
-+#ifndef YY_TYPEDEF_YY_SIZE_T
-+#define YY_TYPEDEF_YY_SIZE_T
-+typedef unsigned int yy_size_t;
-+#endif
-
-+#ifndef YY_STRUCT_YY_BUFFER_STATE
-+#define YY_STRUCT_YY_BUFFER_STATE
- struct yy_buffer_state
- {
- FILE *yy_input_file;
-@@ -177,12 +213,16 @@
- */
- int yy_at_bol;
-
-+ int yy_bs_lineno; /**< The line count. */
-+ int yy_bs_column; /**< The column count. */
-+
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-+
- #define YY_BUFFER_NEW 0
- #define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
-@@ -196,23 +236,33 @@
- * just pointing yyin at a new input file.
- */
- #define YY_BUFFER_EOF_PENDING 2
-+
- };
-+#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
--static YY_BUFFER_STATE yy_current_buffer = 0;
-+/* Stack of input buffers. */
-+static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-+static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-+static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
- /* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
-+ *
-+ * Returns the top of the stack, or NULL.
- */
--#define YY_CURRENT_BUFFER yy_current_buffer
-+#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
-+ ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
-+ : NULL)
-
-+/* Same as previous macro, but useful when we know that the buffer stack is not
-+ * NULL or when we need an lvalue. For internal use only.
-+ */
-+#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
- /* yy_hold_char holds the character lost when yytext is formed. */
- static char yy_hold_char;
--
- static int yy_n_chars; /* number of characters read into yy_ch_buf */
--
--
- int yyleng;
-
- /* Points to current character in buffer. */
-@@ -225,66 +275,92 @@
- */
- static int yy_did_buffer_switch_on_eof;
-
--void yyrestart YY_PROTO(( FILE *input_file ));
--
--void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
--void yy_load_buffer_state YY_PROTO(( void ));
--YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
--void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
--void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
--void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
--#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
--
--YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
--YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
--YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
--
--static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
--static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
--static void yy_flex_free YY_PROTO(( void * ));
-+void yyrestart (FILE *input_file );
-+void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-+YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
-+void yy_delete_buffer (YY_BUFFER_STATE b );
-+void yy_flush_buffer (YY_BUFFER_STATE b );
-+void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
-+void yypop_buffer_state (void );
-+
-+static void yyensure_buffer_stack (void );
-+static void yy_load_buffer_state (void );
-+static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
-+
-+#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
-+
-+YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
-+YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
-+YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
-+
-+void *yyalloc (yy_size_t );
-+void *yyrealloc (void *,yy_size_t );
-+void yyfree (void * );
-
- #define yy_new_buffer yy_create_buffer
-
- #define yy_set_interactive(is_interactive) \
- { \
-- if ( ! yy_current_buffer ) \
-- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-- yy_current_buffer->yy_is_interactive = is_interactive; \
-+ if ( ! YY_CURRENT_BUFFER ){ \
-+ yyensure_buffer_stack (); \
-+ YY_CURRENT_BUFFER_LVALUE = \
-+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
-+ } \
-+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
- #define yy_set_bol(at_bol) \
- { \
-- if ( ! yy_current_buffer ) \
-- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-- yy_current_buffer->yy_at_bol = at_bol; \
-+ if ( ! YY_CURRENT_BUFFER ){\
-+ yyensure_buffer_stack (); \
-+ YY_CURRENT_BUFFER_LVALUE = \
-+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
-+ } \
-+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
--#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
-+#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-+
-+/* Begin user sect3 */
-
- typedef unsigned char YY_CHAR;
-+
- FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-+
- typedef int yy_state_type;
-+
-+extern int yylineno;
-+
-+int yylineno = 1;
-+
- extern char *yytext;
- #define yytext_ptr yytext
-
--static yy_state_type yy_get_previous_state YY_PROTO(( void ));
--static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
--static int yy_get_next_buffer YY_PROTO(( void ));
--static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
-+static yy_state_type yy_get_previous_state (void );
-+static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-+static int yy_get_next_buffer (void );
-+static void yy_fatal_error (yyconst char msg[] );
-
- /* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
- #define YY_DO_BEFORE_ACTION \
-- yytext_ptr = yy_bp; \
-- yyleng = (int) (yy_cp - yy_bp); \
-- yy_hold_char = *yy_cp; \
-+ (yytext_ptr) = yy_bp; \
-+ yyleng = (size_t) (yy_cp - yy_bp); \
-+ (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
-- yy_c_buf_p = yy_cp;
-+ (yy_c_buf_p) = yy_cp;
-
- #define YY_NUM_RULES 16
- #define YY_END_OF_BUFFER 17
--static yyconst short int yy_accept[70] =
-+/* This struct is not used in this scanner,
-+ but its presence is necessary. */
-+struct yy_trans_info
-+ {
-+ flex_int32_t yy_verify;
-+ flex_int32_t yy_nxt;
-+ };
-+static yyconst flex_int16_t yy_accept[70] =
- { 0,
- 10, 10, 17, 15, 10, 10, 15, 15, 9, 9,
- 9, 9, 9, 9, 9, 9, 9, 10, 0, 0,
-@@ -295,7 +371,7 @@
- 7, 0, 0, 0, 0, 0, 11, 12, 0
- } ;
-
--static yyconst int yy_ec[256] =
-+static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-@@ -327,14 +403,14 @@
- 1, 1, 1, 1, 1
- } ;
-
--static yyconst int yy_meta[29] =
-+static yyconst flex_int32_t yy_meta[29] =
- { 0,
- 1, 2, 2, 1, 3, 1, 4, 5, 5, 4,
- 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
- 4, 4, 4, 4, 4, 4, 4, 4
- } ;
-
--static yyconst short int yy_base[75] =
-+static yyconst flex_int16_t yy_base[75] =
- { 0,
- 0, 0, 99, 100, 27, 28, 0, 95, 0, 86,
- 72, 85, 80, 71, 78, 64, 76, 31, 84, 85,
-@@ -346,7 +422,7 @@
- 48, 34, 53, 58
- } ;
-
--static yyconst short int yy_def[75] =
-+static yyconst flex_int16_t yy_def[75] =
- { 0,
- 69, 1, 69, 69, 69, 69, 70, 71, 72, 72,
- 72, 72, 72, 72, 72, 72, 72, 69, 70, 71,
-@@ -358,7 +434,7 @@
- 69, 69, 69, 69
- } ;
-
--static yyconst short int yy_nxt[129] =
-+static yyconst flex_int16_t yy_nxt[129] =
- { 0,
- 4, 5, 6, 5, 7, 8, 9, 4, 4, 10,
- 11, 12, 13, 9, 9, 9, 9, 14, 9, 15,
-@@ -376,7 +452,7 @@
- 69, 69, 69, 69, 69, 69, 69, 69
- } ;
-
--static yyconst short int yy_chk[129] =
-+static yyconst flex_int16_t yy_chk[129] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-@@ -397,6 +473,9 @@
- static yy_state_type yy_last_accepting_state;
- static char *yy_last_accepting_cpos;
-
-+extern int yy_flex_debug;
-+int yy_flex_debug = 0;
-+
- /* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-@@ -406,7 +485,6 @@
- #define YY_RESTORE_YY_MORE_OFFSET
- char *yytext;
- #line 1 "ql_l.l"
--#define INITIAL 0
- #line 2 "ql_l.l"
- /* ql.l - Q.2931 data structures description language */
-
-@@ -451,7 +529,21 @@
- return (*walk)->str;
- }
-
--#line 455 "lex.yy.c"
-+#line 533 "lex.yy.c"
-+
-+#define INITIAL 0
-+
-+#ifndef YY_NO_UNISTD_H
-+/* Special case for "unistd.h", since it is non-ANSI. We include it way
-+ * down here because we want the user's section 1 to have been scanned first.
-+ * The user has a chance to override it with an option.
-+ */
-+#include <unistd.h>
-+#endif
-+
-+#ifndef YY_EXTRA_TYPE
-+#define YY_EXTRA_TYPE void *
-+#endif
-
- /* Macros after this point can all be overridden by user definitions in
- * section 1.
-@@ -459,65 +551,30 @@
-
- #ifndef YY_SKIP_YYWRAP
- #ifdef __cplusplus
--extern "C" int yywrap YY_PROTO(( void ));
-+extern "C" int yywrap (void );
- #else
--extern int yywrap YY_PROTO(( void ));
-+extern int yywrap (void );
- #endif
- #endif
-
--#ifndef YY_NO_UNPUT
--static void yyunput YY_PROTO(( int c, char *buf_ptr ));
--#endif
--
-+ static void yyunput (int c,char *buf_ptr );
-+
- #ifndef yytext_ptr
--static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
-+static void yy_flex_strncpy (char *,yyconst char *,int );
- #endif
-
- #ifdef YY_NEED_STRLEN
--static int yy_flex_strlen YY_PROTO(( yyconst char * ));
-+static int yy_flex_strlen (yyconst char * );
- #endif
-
- #ifndef YY_NO_INPUT
-+
- #ifdef __cplusplus
--static int yyinput YY_PROTO(( void ));
-+static int yyinput (void );
- #else
--static int input YY_PROTO(( void ));
--#endif
--#endif
--
--#if YY_STACK_USED
--static int yy_start_stack_ptr = 0;
--static int yy_start_stack_depth = 0;
--static int *yy_start_stack = 0;
--#ifndef YY_NO_PUSH_STATE
--static void yy_push_state YY_PROTO(( int new_state ));
--#endif
--#ifndef YY_NO_POP_STATE
--static void yy_pop_state YY_PROTO(( void ));
--#endif
--#ifndef YY_NO_TOP_STATE
--static int yy_top_state YY_PROTO(( void ));
-+static int input (void );
- #endif
-
--#else
--#define YY_NO_PUSH_STATE 1
--#define YY_NO_POP_STATE 1
--#define YY_NO_TOP_STATE 1
--#endif
--
--#ifdef YY_MALLOC_DECL
--YY_MALLOC_DECL
--#else
--#if __STDC__
--#ifndef __cplusplus
--#include <stdlib.h>
--#endif
--#else
--/* Just try to get by without declaring the routines. This will fail
-- * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
-- * or sizeof(void*) != sizeof(int).
-- */
--#endif
- #endif
-
- /* Amount of stuff to slurp up with each read. */
-@@ -526,7 +583,6 @@
- #endif
-
- /* Copy whatever the last rule matched to the standard output. */
--
- #ifndef ECHO
- /* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
-@@ -539,9 +595,10 @@
- */
- #ifndef YY_INPUT
- #define YY_INPUT(buf,result,max_size) \
-- if ( yy_current_buffer->yy_is_interactive ) \
-+ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
-- int c = '*', n; \
-+ int c = '*'; \
-+ size_t n; \
- for ( n = 0; n < max_size && \
- (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
-@@ -551,9 +608,22 @@
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
-- else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
-- && ferror( yyin ) ) \
-- YY_FATAL_ERROR( "input in flex scanner failed" );
-+ else \
-+ { \
-+ errno=0; \
-+ while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
-+ { \
-+ if( errno != EINTR) \
-+ { \
-+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
-+ break; \
-+ } \
-+ errno=0; \
-+ clearerr(yyin); \
-+ } \
-+ }\
-+\
-+
- #endif
-
- /* No semi-colon after return; correct usage is to write "yyterminate();" -
-@@ -574,12 +644,18 @@
- #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
- #endif
-
-+/* end tables serialization structures and prototypes */
-+
- /* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
- #ifndef YY_DECL
--#define YY_DECL int yylex YY_PROTO(( void ))
--#endif
-+#define YY_DECL_IS_OURS 1
-+
-+extern int yylex (void);
-+
-+#define YY_DECL int yylex (void)
-+#endif /* !YY_DECL */
-
- /* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
-@@ -596,27 +672,29 @@
- #define YY_RULE_SETUP \
- YY_USER_ACTION
-
-+/** The main scanner function which does all the work.
-+ */
- YY_DECL
-- {
-+{
- register yy_state_type yy_current_state;
-- register char *yy_cp = NULL, *yy_bp = NULL;
-+ register char *yy_cp, *yy_bp;
- register int yy_act;
--
-+
- #line 47 "ql_l.l"
-
-
--#line 609 "lex.yy.c"
-+#line 687 "lex.yy.c"
-
-- if ( yy_init )
-+ if ( (yy_init) )
- {
-- yy_init = 0;
-+ (yy_init) = 0;
-
- #ifdef YY_USER_INIT
- YY_USER_INIT;
- #endif
-
-- if ( ! yy_start )
-- yy_start = 1; /* first start state */
-+ if ( ! (yy_start) )
-+ (yy_start) = 1; /* first start state */
-
- if ( ! yyin )
- yyin = stdin;
-@@ -624,34 +702,36 @@
- if ( ! yyout )
- yyout = stdout;
-
-- if ( ! yy_current_buffer )
-- yy_current_buffer =
-- yy_create_buffer( yyin, YY_BUF_SIZE );
-+ if ( ! YY_CURRENT_BUFFER ) {
-+ yyensure_buffer_stack ();
-+ YY_CURRENT_BUFFER_LVALUE =
-+ yy_create_buffer(yyin,YY_BUF_SIZE );
-+ }
-
-- yy_load_buffer_state();
-+ yy_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
-- yy_cp = yy_c_buf_p;
-+ yy_cp = (yy_c_buf_p);
-
- /* Support of yytext. */
-- *yy_cp = yy_hold_char;
-+ *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
-- yy_current_state = yy_start;
-+ yy_current_state = (yy_start);
- yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
-- yy_last_accepting_state = yy_current_state;
-- yy_last_accepting_cpos = yy_cp;
-+ (yy_last_accepting_state) = yy_current_state;
-+ (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
-@@ -668,24 +748,22 @@
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
-- yy_cp = yy_last_accepting_cpos;
-- yy_current_state = yy_last_accepting_state;
-+ yy_cp = (yy_last_accepting_cpos);
-+ yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
--
- do_action: /* This label is used only to access EOF actions. */
-
--
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
-- *yy_cp = yy_hold_char;
-- yy_cp = yy_last_accepting_cpos;
-- yy_current_state = yy_last_accepting_state;
-+ *yy_cp = (yy_hold_char);
-+ yy_cp = (yy_last_accepting_cpos);
-+ yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
-
- case 1:
-@@ -735,6 +813,7 @@
- return TOK_ID; }
- YY_BREAK
- case 10:
-+/* rule 10 can match eol */
- YY_RULE_SETUP
- #line 59 "ql_l.l"
- lineno += *yytext == '\n';
-@@ -755,6 +834,7 @@
- return TOK_STRING; }
- YY_BREAK
- case 14:
-+/* rule 14 can match eol */
- YY_RULE_SETUP
- #line 66 "ql_l.l"
- lineno++;
-@@ -769,33 +849,33 @@
- #line 69 "ql_l.l"
- ECHO;
- YY_BREAK
--#line 773 "lex.yy.c"
-+#line 853 "lex.yy.c"
- case YY_STATE_EOF(INITIAL):
- yyterminate();
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
-- int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
-+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
-- *yy_cp = yy_hold_char;
-+ *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
-- if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
-+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed yyin at a new source and called
- * yylex(). If so, then we have to assure
-- * consistency between yy_current_buffer and our
-+ * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
-- yy_n_chars = yy_current_buffer->yy_n_chars;
-- yy_current_buffer->yy_input_file = yyin;
-- yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
-+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
-+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
-+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
-@@ -805,13 +885,13 @@
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
-- if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
-- yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
-+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
-- yy_current_state = yy_get_previous_state();
-+ yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
-@@ -824,30 +904,30 @@
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
-- yy_bp = yytext_ptr + YY_MORE_ADJ;
-+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
-- yy_cp = ++yy_c_buf_p;
-+ yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
-- yy_cp = yy_c_buf_p;
-+ yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
-- else switch ( yy_get_next_buffer() )
-+ else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
-- yy_did_buffer_switch_on_eof = 0;
-+ (yy_did_buffer_switch_on_eof) = 0;
-
-- if ( yywrap() )
-+ if ( yywrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
-@@ -858,7 +938,7 @@
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
-- yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
-+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
-@@ -866,30 +946,30 @@
-
- else
- {
-- if ( ! yy_did_buffer_switch_on_eof )
-+ if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
-- yy_c_buf_p =
-- yytext_ptr + yy_amount_of_matched_text;
-+ (yy_c_buf_p) =
-+ (yytext_ptr) + yy_amount_of_matched_text;
-
-- yy_current_state = yy_get_previous_state();
-+ yy_current_state = yy_get_previous_state( );
-
-- yy_cp = yy_c_buf_p;
-- yy_bp = yytext_ptr + YY_MORE_ADJ;
-+ yy_cp = (yy_c_buf_p);
-+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
-- yy_c_buf_p =
-- &yy_current_buffer->yy_ch_buf[yy_n_chars];
-+ (yy_c_buf_p) =
-+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
-- yy_current_state = yy_get_previous_state();
-+ yy_current_state = yy_get_previous_state( );
-
-- yy_cp = yy_c_buf_p;
-- yy_bp = yytext_ptr + YY_MORE_ADJ;
-+ yy_cp = (yy_c_buf_p);
-+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
-@@ -900,8 +980,7 @@
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-- } /* end of yylex */
--
-+} /* end of yylex */
-
- /* yy_get_next_buffer - try to read in a new buffer
- *
-@@ -910,21 +989,20 @@
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
--
--static int yy_get_next_buffer()
-- {
-- register char *dest = yy_current_buffer->yy_ch_buf;
-- register char *source = yytext_ptr;
-+static int yy_get_next_buffer (void)
-+{
-+ register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
-+ register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
-- if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
-+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
-- if ( yy_current_buffer->yy_fill_buffer == 0 )
-+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
-- if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
-+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
-@@ -944,34 +1022,30 @@
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
-- number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
-+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
-- if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
-+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
-- yy_current_buffer->yy_n_chars = yy_n_chars = 0;
-+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
-- int num_to_read =
-- yy_current_buffer->yy_buf_size - number_to_move - 1;
-+ size_t num_to_read =
-+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
--#ifdef YY_USES_REJECT
-- YY_FATAL_ERROR(
--"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
--#else
-
- /* just a shorter name for the current buffer */
-- YY_BUFFER_STATE b = yy_current_buffer;
-+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
-- (int) (yy_c_buf_p - b->yy_ch_buf);
-+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
-@@ -984,8 +1058,7 @@
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
-- yy_flex_realloc( (void *) b->yy_ch_buf,
-- b->yy_buf_size + 2 );
-+ yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
-@@ -995,35 +1068,35 @@
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
-- yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
-+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
-- num_to_read = yy_current_buffer->yy_buf_size -
-+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
--#endif
-+
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
-- YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
-- yy_n_chars, num_to_read );
-+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
-+ (yy_n_chars), num_to_read );
-
-- yy_current_buffer->yy_n_chars = yy_n_chars;
-+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
-- if ( yy_n_chars == 0 )
-+ if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
-- yyrestart( yyin );
-+ yyrestart(yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
-- yy_current_buffer->yy_buffer_status =
-+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-@@ -1031,32 +1104,31 @@
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
-- yy_n_chars += number_to_move;
-- yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
-- yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
-+ (yy_n_chars) += number_to_move;
-+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
-+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
-- yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
-+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-- }
--
-+}
-
- /* yy_get_previous_state - get the state just before the EOB char was reached */
-
--static yy_state_type yy_get_previous_state()
-- {
-+ static yy_state_type yy_get_previous_state (void)
-+{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-+
-+ yy_current_state = (yy_start);
-
-- yy_current_state = yy_start;
--
-- for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
-+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
-- yy_last_accepting_state = yy_current_state;
-- yy_last_accepting_cpos = yy_cp;
-+ (yy_last_accepting_state) = yy_current_state;
-+ (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
-@@ -1068,30 +1140,23 @@
- }
-
- return yy_current_state;
-- }
--
-+}
-
- /* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
--
--#ifdef YY_USE_PROTOS
--static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
--#else
--static yy_state_type yy_try_NUL_trans( yy_current_state )
--yy_state_type yy_current_state;
--#endif
-- {
-+ static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-+{
- register int yy_is_jam;
-- register char *yy_cp = yy_c_buf_p;
-+ register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
-- yy_last_accepting_state = yy_current_state;
-- yy_last_accepting_cpos = yy_cp;
-+ (yy_last_accepting_state) = yy_current_state;
-+ (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
-@@ -1103,80 +1168,73 @@
- yy_is_jam = (yy_current_state == 69);
-
- return yy_is_jam ? 0 : yy_current_state;
-- }
--
-+}
-
--#ifndef YY_NO_UNPUT
--#ifdef YY_USE_PROTOS
--static void yyunput( int c, register char *yy_bp )
--#else
--static void yyunput( c, yy_bp )
--int c;
--register char *yy_bp;
--#endif
-- {
-- register char *yy_cp = yy_c_buf_p;
-+ static void yyunput (int c, register char * yy_bp )
-+{
-+ register char *yy_cp;
-+
-+ yy_cp = (yy_c_buf_p);
-
- /* undo effects of setting up yytext */
-- *yy_cp = yy_hold_char;
-+ *yy_cp = (yy_hold_char);
-
-- if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- { /* need to shift things up to make room */
- /* +2 for EOB chars. */
-- register int number_to_move = yy_n_chars + 2;
-- register char *dest = &yy_current_buffer->yy_ch_buf[
-- yy_current_buffer->yy_buf_size + 2];
-+ register int number_to_move = (yy_n_chars) + 2;
-+ register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
-+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
- register char *source =
-- &yy_current_buffer->yy_ch_buf[number_to_move];
-+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
-
-- while ( source > yy_current_buffer->yy_ch_buf )
-+ while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- *--dest = *--source;
-
- yy_cp += (int) (dest - source);
- yy_bp += (int) (dest - source);
-- yy_current_buffer->yy_n_chars =
-- yy_n_chars = yy_current_buffer->yy_buf_size;
-+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
-+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
-
-- if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
- YY_FATAL_ERROR( "flex scanner push-back overflow" );
- }
-
- *--yy_cp = (char) c;
-
-+ (yytext_ptr) = yy_bp;
-+ (yy_hold_char) = *yy_cp;
-+ (yy_c_buf_p) = yy_cp;
-+}
-
-- yytext_ptr = yy_bp;
-- yy_hold_char = *yy_cp;
-- yy_c_buf_p = yy_cp;
-- }
--#endif /* ifndef YY_NO_UNPUT */
--
--
-+#ifndef YY_NO_INPUT
- #ifdef __cplusplus
--static int yyinput()
-+ static int yyinput (void)
- #else
--static int input()
-+ static int input (void)
- #endif
-- {
-- int c;
-
-- *yy_c_buf_p = yy_hold_char;
-+{
-+ int c;
-+
-+ *(yy_c_buf_p) = (yy_hold_char);
-
-- if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
-+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
-- if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
-- *yy_c_buf_p = '\0';
-+ *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
-- int offset = yy_c_buf_p - yytext_ptr;
-- ++yy_c_buf_p;
-+ int offset = (yy_c_buf_p) - (yytext_ptr);
-+ ++(yy_c_buf_p);
-
-- switch ( yy_get_next_buffer() )
-+ switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
-@@ -1190,16 +1248,16 @@
- */
-
- /* Reset buffer status. */
-- yyrestart( yyin );
-+ yyrestart(yyin );
-
-- /* fall through */
-+ /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
-- if ( yywrap() )
-+ if ( yywrap( ) )
- return EOF;
-
-- if ( ! yy_did_buffer_switch_on_eof )
-+ if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- #ifdef __cplusplus
- return yyinput();
-@@ -1209,90 +1267,92 @@
- }
-
- case EOB_ACT_CONTINUE_SCAN:
-- yy_c_buf_p = yytext_ptr + offset;
-+ (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
-- c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */
-- *yy_c_buf_p = '\0'; /* preserve yytext */
-- yy_hold_char = *++yy_c_buf_p;
--
-+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
-+ *(yy_c_buf_p) = '\0'; /* preserve yytext */
-+ (yy_hold_char) = *++(yy_c_buf_p);
-
- return c;
-- }
--
--
--#ifdef YY_USE_PROTOS
--void yyrestart( FILE *input_file )
--#else
--void yyrestart( input_file )
--FILE *input_file;
--#endif
-- {
-- if ( ! yy_current_buffer )
-- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
-+}
-+#endif /* ifndef YY_NO_INPUT */
-
-- yy_init_buffer( yy_current_buffer, input_file );
-- yy_load_buffer_state();
-+/** Immediately switch to a different input stream.
-+ * @param input_file A readable stream.
-+ *
-+ * @note This function does not reset the start condition to @c INITIAL .
-+ */
-+ void yyrestart (FILE * input_file )
-+{
-+
-+ if ( ! YY_CURRENT_BUFFER ){
-+ yyensure_buffer_stack ();
-+ YY_CURRENT_BUFFER_LVALUE =
-+ yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
-+ yy_init_buffer(YY_CURRENT_BUFFER,input_file );
-+ yy_load_buffer_state( );
-+}
-
--#ifdef YY_USE_PROTOS
--void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
--#else
--void yy_switch_to_buffer( new_buffer )
--YY_BUFFER_STATE new_buffer;
--#endif
-- {
-- if ( yy_current_buffer == new_buffer )
-+/** Switch to a different input buffer.
-+ * @param new_buffer The new input buffer.
-+ *
-+ */
-+ void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-+{
-+
-+ /* TODO. We should be able to replace this entire function body
-+ * with
-+ * yypop_buffer_state();
-+ * yypush_buffer_state(new_buffer);
-+ */
-+ yyensure_buffer_stack ();
-+ if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
-- if ( yy_current_buffer )
-+ if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
-- *yy_c_buf_p = yy_hold_char;
-- yy_current_buffer->yy_buf_pos = yy_c_buf_p;
-- yy_current_buffer->yy_n_chars = yy_n_chars;
-+ *(yy_c_buf_p) = (yy_hold_char);
-+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
-+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
-- yy_current_buffer = new_buffer;
-- yy_load_buffer_state();
-+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
-+ yy_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (yywrap()) processing, but the only time this flag
- * is looked at is after yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
-- yy_did_buffer_switch_on_eof = 1;
-- }
--
--
--#ifdef YY_USE_PROTOS
--void yy_load_buffer_state( void )
--#else
--void yy_load_buffer_state()
--#endif
-- {
-- yy_n_chars = yy_current_buffer->yy_n_chars;
-- yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
-- yyin = yy_current_buffer->yy_input_file;
-- yy_hold_char = *yy_c_buf_p;
-- }
-+ (yy_did_buffer_switch_on_eof) = 1;
-+}
-
-+static void yy_load_buffer_state (void)
-+{
-+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
-+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
-+ yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
-+ (yy_hold_char) = *(yy_c_buf_p);
-+}
-
--#ifdef YY_USE_PROTOS
--YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
--#else
--YY_BUFFER_STATE yy_create_buffer( file, size )
--FILE *file;
--int size;
--#endif
-- {
-+/** Allocate and initialize an input buffer state.
-+ * @param file A readable stream.
-+ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
-+ *
-+ * @return the allocated buffer state.
-+ */
-+ YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
-+{
- YY_BUFFER_STATE b;
--
-- b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-+
-+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-@@ -1301,75 +1361,75 @@
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
-- b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
-+ b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
-- yy_init_buffer( b, file );
-+ yy_init_buffer(b,file );
-
- return b;
-- }
--
-+}
-
--#ifdef YY_USE_PROTOS
--void yy_delete_buffer( YY_BUFFER_STATE b )
--#else
--void yy_delete_buffer( b )
--YY_BUFFER_STATE b;
--#endif
-- {
-+/** Destroy the buffer.
-+ * @param b a buffer created with yy_create_buffer()
-+ *
-+ */
-+ void yy_delete_buffer (YY_BUFFER_STATE b )
-+{
-+
- if ( ! b )
- return;
-
-- if ( b == yy_current_buffer )
-- yy_current_buffer = (YY_BUFFER_STATE) 0;
-+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
-+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
-- yy_flex_free( (void *) b->yy_ch_buf );
-+ yyfree((void *) b->yy_ch_buf );
-
-- yy_flex_free( (void *) b );
-- }
--
--
--
--#ifdef YY_USE_PROTOS
--void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
--#else
--void yy_init_buffer( b, file )
--YY_BUFFER_STATE b;
--FILE *file;
--#endif
-+ yyfree((void *) b );
-+}
-
-+#ifndef __cplusplus
-+extern int isatty (int );
-+#endif /* __cplusplus */
-+
-+/* Initializes or reinitializes a buffer.
-+ * This function is sometimes called more than once on the same buffer,
-+ * such as during a yyrestart() or at EOF.
-+ */
-+ static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-- {
-- yy_flush_buffer( b );
-+{
-+ int oerrno = errno;
-+
-+ yy_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
--#if YY_ALWAYS_INTERACTIVE
-- b->yy_is_interactive = 1;
--#else
--#if YY_NEVER_INTERACTIVE
-- b->yy_is_interactive = 0;
--#else
-- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
--#endif
--#endif
-- }
--
-+ /* If b is the current buffer, then yy_init_buffer was _probably_
-+ * called from yyrestart() or through yy_get_next_buffer.
-+ * In that case, we don't want to reset the lineno or column.
-+ */
-+ if (b != YY_CURRENT_BUFFER){
-+ b->yy_bs_lineno = 1;
-+ b->yy_bs_column = 0;
-+ }
-
--#ifdef YY_USE_PROTOS
--void yy_flush_buffer( YY_BUFFER_STATE b )
--#else
--void yy_flush_buffer( b )
--YY_BUFFER_STATE b;
--#endif
-+ b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-+
-+ errno = oerrno;
-+}
-
-- {
-- if ( ! b )
-+/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
-+ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
-+ *
-+ */
-+ void yy_flush_buffer (YY_BUFFER_STATE b )
-+{
-+ if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-@@ -1386,29 +1446,121 @@
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
-- if ( b == yy_current_buffer )
-- yy_load_buffer_state();
-+ if ( b == YY_CURRENT_BUFFER )
-+ yy_load_buffer_state( );
-+}
-+
-+/** Pushes the new state onto the stack. The new state becomes
-+ * the current state. This function will allocate the stack
-+ * if necessary.
-+ * @param new_buffer The new state.
-+ *
-+ */
-+void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
-+{
-+ if (new_buffer == NULL)
-+ return;
-+
-+ yyensure_buffer_stack();
-+
-+ /* This block is copied from yy_switch_to_buffer. */
-+ if ( YY_CURRENT_BUFFER )
-+ {
-+ /* Flush out information for old buffer. */
-+ *(yy_c_buf_p) = (yy_hold_char);
-+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
-+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
-+ }
-+
-+ /* Only push if top exists. Otherwise, replace top. */
-+ if (YY_CURRENT_BUFFER)
-+ (yy_buffer_stack_top)++;
-+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
-+
-+ /* copied from yy_switch_to_buffer. */
-+ yy_load_buffer_state( );
-+ (yy_did_buffer_switch_on_eof) = 1;
-+}
-+
-+/** Removes and deletes the top of the stack, if present.
-+ * The next element becomes the new top.
-+ *
-+ */
-+void yypop_buffer_state (void)
-+{
-+ if (!YY_CURRENT_BUFFER)
-+ return;
-+
-+ yy_delete_buffer(YY_CURRENT_BUFFER );
-+ YY_CURRENT_BUFFER_LVALUE = NULL;
-+ if ((yy_buffer_stack_top) > 0)
-+ --(yy_buffer_stack_top);
-+
-+ if (YY_CURRENT_BUFFER) {
-+ yy_load_buffer_state( );
-+ (yy_did_buffer_switch_on_eof) = 1;
- }
-+}
-
-+/* Allocates the stack if it does not exist.
-+ * Guarantees space for at least one push.
-+ */
-+static void yyensure_buffer_stack (void)
-+{
-+ int num_to_alloc;
-+
-+ if (!(yy_buffer_stack)) {
-+
-+ /* First allocation is just for 2 elements, since we don't know if this
-+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
-+ * immediate realloc on the next call.
-+ */
-+ num_to_alloc = 1;
-+ (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
-+ (num_to_alloc * sizeof(struct yy_buffer_state*)
-+ );
-+
-+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-+
-+ (yy_buffer_stack_max) = num_to_alloc;
-+ (yy_buffer_stack_top) = 0;
-+ return;
-+ }
-
--#ifndef YY_NO_SCAN_BUFFER
--#ifdef YY_USE_PROTOS
--YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
--#else
--YY_BUFFER_STATE yy_scan_buffer( base, size )
--char *base;
--yy_size_t size;
--#endif
-- {
-- YY_BUFFER_STATE b;
-+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-+
-+ /* Increase the buffer to prepare for a possible push. */
-+ int grow_size = 8 /* arbitrary grow size */;
-
-+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
-+ (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
-+ ((yy_buffer_stack),
-+ num_to_alloc * sizeof(struct yy_buffer_state*)
-+ );
-+
-+ /* zero only the new slots.*/
-+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
-+ (yy_buffer_stack_max) = num_to_alloc;
-+ }
-+}
-+
-+/** Setup the input buffer state to scan directly from a user-specified character buffer.
-+ * @param base the character buffer
-+ * @param size the size in bytes of the character buffer
-+ *
-+ * @return the newly allocated buffer state object.
-+ */
-+YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
-+{
-+ YY_BUFFER_STATE b;
-+
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
-- b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
-@@ -1422,47 +1574,42 @@
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
-- yy_switch_to_buffer( b );
-+ yy_switch_to_buffer(b );
-
- return b;
-- }
--#endif
--
--
--#ifndef YY_NO_SCAN_STRING
--#ifdef YY_USE_PROTOS
--YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
--#else
--YY_BUFFER_STATE yy_scan_string( yy_str )
--yyconst char *yy_str;
--#endif
-- {
-- int len;
-- for ( len = 0; yy_str[len]; ++len )
-- ;
--
-- return yy_scan_bytes( yy_str, len );
-- }
--#endif
-+}
-
-+/** Setup the input buffer state to scan a string. The next call to yylex() will
-+ * scan from a @e copy of @a str.
-+ * @param str a NUL-terminated string to scan
-+ *
-+ * @return the newly allocated buffer state object.
-+ * @note If you want to scan bytes that may contain NUL values, then use
-+ * yy_scan_bytes() instead.
-+ */
-+YY_BUFFER_STATE yy_scan_string (yyconst char * yy_str )
-+{
-+
-+ return yy_scan_bytes(yy_str,strlen(yy_str) );
-+}
-
--#ifndef YY_NO_SCAN_BYTES
--#ifdef YY_USE_PROTOS
--YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
--#else
--YY_BUFFER_STATE yy_scan_bytes( bytes, len )
--yyconst char *bytes;
--int len;
--#endif
-- {
-+/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
-+ * scan from a @e copy of @a bytes.
-+ * @param bytes the byte buffer to scan
-+ * @param len the number of bytes in the buffer pointed to by @a bytes.
-+ *
-+ * @return the newly allocated buffer state object.
-+ */
-+YY_BUFFER_STATE yy_scan_bytes (yyconst char * bytes, int len )
-+{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
--
-+
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = len + 2;
-- buf = (char *) yy_flex_alloc( n );
-+ buf = (char *) yyalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
-@@ -1471,7 +1618,7 @@
-
- buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
-
-- b = yy_scan_buffer( buf, n );
-+ b = yy_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
-@@ -1481,148 +1628,164 @@
- b->yy_is_our_buffer = 1;
-
- return b;
-- }
--#endif
--
-+}
-
--#ifndef YY_NO_PUSH_STATE
--#ifdef YY_USE_PROTOS
--static void yy_push_state( int new_state )
--#else
--static void yy_push_state( new_state )
--int new_state;
-+#ifndef YY_EXIT_FAILURE
-+#define YY_EXIT_FAILURE 2
- #endif
-- {
-- if ( yy_start_stack_ptr >= yy_start_stack_depth )
-- {
-- yy_size_t new_size;
-
-- yy_start_stack_depth += YY_START_STACK_INCR;
-- new_size = yy_start_stack_depth * sizeof( int );
-+static void yy_fatal_error (yyconst char* msg )
-+{
-+ (void) fprintf( stderr, "%s\n", msg );
-+ exit( YY_EXIT_FAILURE );
-+}
-
-- if ( ! yy_start_stack )
-- yy_start_stack = (int *) yy_flex_alloc( new_size );
-+/* Redefine yyless() so it works in section 3 code. */
-
-- else
-- yy_start_stack = (int *) yy_flex_realloc(
-- (void *) yy_start_stack, new_size );
-+#undef yyless
-+#define yyless(n) \
-+ do \
-+ { \
-+ /* Undo effects of setting up yytext. */ \
-+ int yyless_macro_arg = (n); \
-+ YY_LESS_LINENO(yyless_macro_arg);\
-+ yytext[yyleng] = (yy_hold_char); \
-+ (yy_c_buf_p) = yytext + yyless_macro_arg; \
-+ (yy_hold_char) = *(yy_c_buf_p); \
-+ *(yy_c_buf_p) = '\0'; \
-+ yyleng = yyless_macro_arg; \
-+ } \
-+ while ( 0 )
-
-- if ( ! yy_start_stack )
-- YY_FATAL_ERROR(
-- "out of memory expanding start-condition stack" );
-- }
-+/* Accessor methods (get/set functions) to struct members. */
-
-- yy_start_stack[yy_start_stack_ptr++] = YY_START;
-+/** Get the current line number.
-+ *
-+ */
-+int yyget_lineno (void)
-+{
-+
-+ return yylineno;
-+}
-
-- BEGIN(new_state);
-- }
--#endif
-+/** Get the input stream.
-+ *
-+ */
-+FILE *yyget_in (void)
-+{
-+ return yyin;
-+}
-
-+/** Get the output stream.
-+ *
-+ */
-+FILE *yyget_out (void)
-+{
-+ return yyout;
-+}
-
--#ifndef YY_NO_POP_STATE
--static void yy_pop_state()
-- {
-- if ( --yy_start_stack_ptr < 0 )
-- YY_FATAL_ERROR( "start-condition stack underflow" );
-+/** Get the length of the current token.
-+ *
-+ */
-+int yyget_leng (void)
-+{
-+ return yyleng;
-+}
-
-- BEGIN(yy_start_stack[yy_start_stack_ptr]);
-- }
--#endif
-+/** Get the current token.
-+ *
-+ */
-
-+char *yyget_text (void)
-+{
-+ return yytext;
-+}
-
--#ifndef YY_NO_TOP_STATE
--static int yy_top_state()
-- {
-- return yy_start_stack[yy_start_stack_ptr - 1];
-- }
--#endif
-+/** Set the current line number.
-+ * @param line_number
-+ *
-+ */
-+void yyset_lineno (int line_number )
-+{
-+
-+ yylineno = line_number;
-+}
-
--#ifndef YY_EXIT_FAILURE
--#define YY_EXIT_FAILURE 2
--#endif
-+/** Set the input stream. This does not discard the current
-+ * input buffer.
-+ * @param in_str A readable stream.
-+ *
-+ * @see yy_switch_to_buffer
-+ */
-+void yyset_in (FILE * in_str )
-+{
-+ yyin = in_str ;
-+}
-
--#ifdef YY_USE_PROTOS
--static void yy_fatal_error( yyconst char msg[] )
--#else
--static void yy_fatal_error( msg )
--char msg[];
--#endif
-- {
-- (void) fprintf( stderr, "%s\n", msg );
-- exit( YY_EXIT_FAILURE );
-- }
-+void yyset_out (FILE * out_str )
-+{
-+ yyout = out_str ;
-+}
-
-+int yyget_debug (void)
-+{
-+ return yy_flex_debug;
-+}
-
-+void yyset_debug (int bdebug )
-+{
-+ yy_flex_debug = bdebug ;
-+}
-
--/* Redefine yyless() so it works in section 3 code. */
-+/* yylex_destroy is for both reentrant and non-reentrant scanners. */
-+int yylex_destroy (void)
-+{
-+
-+ /* Pop the buffer stack, destroying each element. */
-+ while(YY_CURRENT_BUFFER){
-+ yy_delete_buffer(YY_CURRENT_BUFFER );
-+ YY_CURRENT_BUFFER_LVALUE = NULL;
-+ yypop_buffer_state();
-+ }
-
--#undef yyless
--#define yyless(n) \
-- do \
-- { \
-- /* Undo effects of setting up yytext. */ \
-- yytext[yyleng] = yy_hold_char; \
-- yy_c_buf_p = yytext + n; \
-- yy_hold_char = *yy_c_buf_p; \
-- *yy_c_buf_p = '\0'; \
-- yyleng = n; \
-- } \
-- while ( 0 )
-+ /* Destroy the stack itself. */
-+ yyfree((yy_buffer_stack) );
-+ (yy_buffer_stack) = NULL;
-
-+ return 0;
-+}
-
--/* Internal utility routines. */
-+/*
-+ * Internal utility routines.
-+ */
-
- #ifndef yytext_ptr
--#ifdef YY_USE_PROTOS
--static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
--#else
--static void yy_flex_strncpy( s1, s2, n )
--char *s1;
--yyconst char *s2;
--int n;
--#endif
-- {
-+static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-+{
- register int i;
-- for ( i = 0; i < n; ++i )
-+ for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-- }
-+}
- #endif
-
- #ifdef YY_NEED_STRLEN
--#ifdef YY_USE_PROTOS
--static int yy_flex_strlen( yyconst char *s )
--#else
--static int yy_flex_strlen( s )
--yyconst char *s;
--#endif
-- {
-+static int yy_flex_strlen (yyconst char * s )
-+{
- register int n;
-- for ( n = 0; s[n]; ++n )
-+ for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-- }
-+}
- #endif
-
--
--#ifdef YY_USE_PROTOS
--static void *yy_flex_alloc( yy_size_t size )
--#else
--static void *yy_flex_alloc( size )
--yy_size_t size;
--#endif
-- {
-+void *yyalloc (yy_size_t size )
-+{
- return (void *) malloc( size );
-- }
-+}
-
--#ifdef YY_USE_PROTOS
--static void *yy_flex_realloc( void *ptr, yy_size_t size )
--#else
--static void *yy_flex_realloc( ptr, size )
--void *ptr;
--yy_size_t size;
--#endif
-- {
-+void *yyrealloc (void * ptr, yy_size_t size )
-+{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
-@@ -1631,30 +1794,34 @@
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-- }
-+}
-
--#ifdef YY_USE_PROTOS
--static void yy_flex_free( void *ptr )
--#else
--static void yy_flex_free( ptr )
--void *ptr;
--#endif
-- {
-- free( ptr );
-- }
-+void yyfree (void * ptr )
-+{
-+ free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
-+}
-
--#if YY_MAIN
--int main()
-- {
-- yylex();
-- return 0;
-- }
-+#define YYTABLES_NAME "yytables"
-+
-+#undef YY_NEW_FILE
-+#undef YY_FLUSH_BUFFER
-+#undef yy_set_bol
-+#undef yy_new_buffer
-+#undef yy_set_interactive
-+#undef yytext_ptr
-+#undef YY_DO_BEFORE_ACTION
-+
-+#ifdef YY_DECL_IS_OURS
-+#undef YY_DECL_IS_OURS
-+#undef YY_DECL
- #endif
- #line 69 "ql_l.l"
-
-
--void yyerror(char *s)
-+
-+void yyerror(const char *s)
- {
- fprintf(stderr,"line %d: %s near \"%s\"\n",lineno,s,yytext);
- exit(1);
- }
-+
---- linux-atm-2.4.1.orig/src/qgen/ql_y.c
-+++ linux-atm-2.4.1/src/qgen/ql_y.c
-@@ -1,21 +1,87 @@
-+/* A Bison parser, made by GNU Bison 1.875d. */
-
--/* A Bison parser, made from ql_y.y
-- by GNU Bison version 1.28 */
-+/* Skeleton parser for Yacc-like parsing with Bison,
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-
--#define YYBISON 1 /* Identify Bison output. */
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
--#define TOK_BREAK 257
--#define TOK_CASE 258
--#define TOK_DEF 259
--#define TOK_DEFAULT 260
--#define TOK_LENGTH 261
--#define TOK_MULTI 262
--#define TOK_RECOVER 263
--#define TOK_ABORT 264
--#define TOK_ID 265
--#define TOK_INCLUDE 266
--#define TOK_STRING 267
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* Written by Richard Stallman by simplifying the original so called
-+ ``semantic'' parser. */
-+
-+/* All symbols defined below should begin with yy or YY, to avoid
-+ infringing on user name space. This should be done even for local
-+ variables, as they might otherwise be expanded by user macros.
-+ There are some unavoidable exceptions within include files to
-+ define necessary library symbols; they are noted "INFRINGES ON
-+ USER NAME SPACE" below. */
-+
-+/* Identify Bison output. */
-+#define YYBISON 1
-+
-+/* Skeleton name. */
-+#define YYSKELETON_NAME "yacc.c"
-+
-+/* Pure parsers. */
-+#define YYPURE 0
-+
-+/* Using locations. */
-+#define YYLSP_NEEDED 0
-+
-+
-+
-+/* Tokens. */
-+#ifndef YYTOKENTYPE
-+# define YYTOKENTYPE
-+ /* Put the tokens into the symbol table, so that GDB and other debuggers
-+ know about them. */
-+ enum yytokentype {
-+ TOK_BREAK = 258,
-+ TOK_CASE = 259,
-+ TOK_DEF = 260,
-+ TOK_DEFAULT = 261,
-+ TOK_LENGTH = 262,
-+ TOK_MULTI = 263,
-+ TOK_RECOVER = 264,
-+ TOK_ABORT = 265,
-+ TOK_ID = 266,
-+ TOK_INCLUDE = 267,
-+ TOK_STRING = 268
-+ };
-+#endif
-+#define TOK_BREAK 258
-+#define TOK_CASE 259
-+#define TOK_DEF 260
-+#define TOK_DEFAULT 261
-+#define TOK_LENGTH 262
-+#define TOK_MULTI 263
-+#define TOK_RECOVER 264
-+#define TOK_ABORT 265
-+#define TOK_ID 266
-+#define TOK_INCLUDE 267
-+#define TOK_STRING 268
-+
-+
-+
-+
-+/* Copy the first part of user declarations. */
- #line 1 "ql_y.y"
-
- /* ql.y - Q.2931 data structures description language */
-@@ -36,6 +102,8 @@
- #include "qgen.h"
- #include "file.h"
-
-+extern void yyerror(const char *s);
-+
-
- #define MAX_TOKEN 256
- #define DEFAULT_NAMELIST_FILE "default.nl"
-@@ -77,9 +145,10 @@
- for (walk = strchr(start,0)-1; walk > start && isspace(*walk); walk--)
- *walk = 0;
- if (*start == ':') {
-- if (!(searching = strcmp(start+1,name)))
-+ if (!(searching = strcmp(start+1,name))) {
- if (found) yyerror("multiple entries");
- else found = 1;
-+ }
- continue;
- }
- if (searching) continue;
-@@ -154,8 +223,23 @@
-
-
-
--#line 139 "ql_y.y"
--typedef union {
-+
-+/* Enabling traces. */
-+#ifndef YYDEBUG
-+# define YYDEBUG 0
-+#endif
-+
-+/* Enabling verbose error messages. */
-+#ifdef YYERROR_VERBOSE
-+# undef YYERROR_VERBOSE
-+# define YYERROR_VERBOSE 1
-+#else
-+# define YYERROR_VERBOSE 0
-+#endif
-+
-+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
-+#line 142 "ql_y.y"
-+typedef union YYSTYPE {
- const char *str;
- int num;
- FIELD *field;
-@@ -164,470 +248,762 @@
- TAG *tag;
- NAME_LIST *nlist;
- } YYSTYPE;
--#include <stdio.h>
-+/* Line 191 of yacc.c. */
-+#line 253 "y.tab.c"
-+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-+# define YYSTYPE_IS_DECLARED 1
-+# define YYSTYPE_IS_TRIVIAL 1
-+#endif
-+
-+
-+
-+/* Copy the second part of user declarations. */
-+
-+
-+/* Line 214 of yacc.c. */
-+#line 265 "y.tab.c"
-+
-+#if ! defined (yyoverflow) || YYERROR_VERBOSE
-+
-+# ifndef YYFREE
-+# define YYFREE free
-+# endif
-+# ifndef YYMALLOC
-+# define YYMALLOC malloc
-+# endif
-+
-+/* The parser invokes alloca or malloc; define the necessary symbols. */
-+
-+# ifdef YYSTACK_USE_ALLOCA
-+# if YYSTACK_USE_ALLOCA
-+# define YYSTACK_ALLOC alloca
-+# endif
-+# else
-+# if defined (alloca) || defined (_ALLOCA_H)
-+# define YYSTACK_ALLOC alloca
-+# else
-+# ifdef __GNUC__
-+# define YYSTACK_ALLOC __builtin_alloca
-+# endif
-+# endif
-+# endif
-+
-+# ifdef YYSTACK_ALLOC
-+ /* Pacify GCC's `empty if-body' warning. */
-+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
-+# else
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+# define YYSTACK_ALLOC YYMALLOC
-+# define YYSTACK_FREE YYFREE
-+# endif
-+#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
-+
-+
-+#if (! defined (yyoverflow) \
-+ && (! defined (__cplusplus) \
-+ || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
-+
-+/* A type that is properly aligned for any stack member. */
-+union yyalloc
-+{
-+ short int yyss;
-+ YYSTYPE yyvs;
-+ };
-+
-+/* The size of the maximum gap between one aligned stack and the next. */
-+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-+
-+/* The size of an array large to enough to hold all stacks, each with
-+ N elements. */
-+# define YYSTACK_BYTES(N) \
-+ ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \
-+ + YYSTACK_GAP_MAXIMUM)
-+
-+/* Copy COUNT objects from FROM to TO. The source and destination do
-+ not overlap. */
-+# ifndef YYCOPY
-+# if defined (__GNUC__) && 1 < __GNUC__
-+# define YYCOPY(To, From, Count) \
-+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-+# else
-+# define YYCOPY(To, From, Count) \
-+ do \
-+ { \
-+ register YYSIZE_T yyi; \
-+ for (yyi = 0; yyi < (Count); yyi++) \
-+ (To)[yyi] = (From)[yyi]; \
-+ } \
-+ while (0)
-+# endif
-+# endif
-+
-+/* Relocate STACK from its old location to the new one. The
-+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
-+ elements in the stack, and YYPTR gives the new location of the
-+ stack. Advance YYPTR to a properly aligned location for the next
-+ stack. */
-+# define YYSTACK_RELOCATE(Stack) \
-+ do \
-+ { \
-+ YYSIZE_T yynewbytes; \
-+ YYCOPY (&yyptr->Stack, Stack, yysize); \
-+ Stack = &yyptr->Stack; \
-+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
-+ yyptr += yynewbytes / sizeof (*yyptr); \
-+ } \
-+ while (0)
-
--#ifndef __cplusplus
--#ifndef __STDC__
--#define const
--#endif
- #endif
-
-+#if defined (__STDC__) || defined (__cplusplus)
-+ typedef signed char yysigned_char;
-+#else
-+ typedef short int yysigned_char;
-+#endif
-
--
--#define YYFINAL 86
--#define YYFLAG -32768
--#define YYNTBASE 23
--
--#define YYTRANSLATE(x) ((unsigned)(x) <= 267 ? yytranslate[x] : 47)
--
--static const char yytranslate[] = { 0,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 21, 18, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 22, 2, 17,
-- 14, 19, 2, 20, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 15, 2, 16, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
-- 7, 8, 9, 10, 11, 12, 13
-+/* YYFINAL -- State number of the termination state. */
-+#define YYFINAL 5
-+/* YYLAST -- Last index in YYTABLE. */
-+#define YYLAST 65
-+
-+/* YYNTOKENS -- Number of terminals. */
-+#define YYNTOKENS 23
-+/* YYNNTS -- Number of nonterminals. */
-+#define YYNNTS 25
-+/* YYNRULES -- Number of rules. */
-+#define YYNRULES 46
-+/* YYNRULES -- Number of states. */
-+#define YYNSTATES 86
-+
-+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-+#define YYUNDEFTOK 2
-+#define YYMAXUTOK 268
-+
-+#define YYTRANSLATE(YYX) \
-+ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-+
-+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-+static const unsigned char yytranslate[] =
-+{
-+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 21, 18, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 22, 2,
-+ 17, 14, 19, 2, 20, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 15, 2, 16, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
-+ 5, 6, 7, 8, 9, 10, 11, 12, 13
- };
-
--#if YYDEBUG != 0
--static const short yyprhs[] = { 0,
-- 0, 4, 5, 8, 9, 12, 17, 18, 21, 23,
-- 27, 30, 31, 34, 40, 41, 43, 47, 53, 54,
-- 57, 59, 60, 63, 64, 67, 69, 74, 79, 83,
-- 84, 87, 88, 90, 91, 97, 98, 105, 106, 112,
-- 113, 120, 121, 124, 125
-+#if YYDEBUG
-+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
-+ YYRHS. */
-+static const unsigned char yyprhs[] =
-+{
-+ 0, 0, 3, 7, 8, 11, 12, 15, 20, 21,
-+ 24, 26, 30, 33, 34, 37, 43, 44, 46, 50,
-+ 56, 57, 60, 62, 63, 66, 67, 70, 72, 77,
-+ 82, 86, 87, 90, 91, 93, 94, 100, 101, 108,
-+ 109, 115, 116, 123, 124, 127, 128
- };
-
--static const short yyrhs[] = { 24,
-- 25, 29, 0, 0, 12, 24, 0, 0, 25, 26,
-- 0, 5, 11, 14, 29, 0, 0, 28, 29, 0,
-- 11, 0, 15, 30, 16, 0, 10, 11, 0, 0,
-- 31, 30, 0, 32, 11, 40, 17, 33, 0, 0,
-- 3, 0, 18, 35, 19, 0, 35, 34, 36, 19,
-- 37, 0, 0, 20, 35, 0, 11, 0, 0, 21,
-- 11, 0, 0, 14, 38, 0, 11, 0, 4, 15,
-- 41, 16, 0, 8, 15, 43, 16, 0, 39, 7,
-- 29, 0, 0, 9, 11, 0, 0, 13, 0, 0,
-- 6, 11, 45, 46, 29, 0, 0, 11, 45, 46,
-- 29, 42, 41, 0, 0, 6, 11, 45, 46, 27,
-- 0, 0, 11, 45, 46, 27, 44, 43, 0, 0,
-- 22, 11, 0, 0, 21, 11, 46, 0
-+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-+static const yysigned_char yyrhs[] =
-+{
-+ 24, 0, -1, 25, 26, 30, -1, -1, 12, 25,
-+ -1, -1, 26, 27, -1, 5, 11, 14, 30, -1,
-+ -1, 29, 30, -1, 11, -1, 15, 31, 16, -1,
-+ 10, 11, -1, -1, 32, 31, -1, 33, 11, 41,
-+ 17, 34, -1, -1, 3, -1, 18, 36, 19, -1,
-+ 36, 35, 37, 19, 38, -1, -1, 20, 36, -1,
-+ 11, -1, -1, 21, 11, -1, -1, 14, 39, -1,
-+ 11, -1, 4, 15, 42, 16, -1, 8, 15, 44,
-+ 16, -1, 40, 7, 30, -1, -1, 9, 11, -1,
-+ -1, 13, -1, -1, 6, 11, 46, 47, 30, -1,
-+ -1, 11, 46, 47, 30, 43, 42, -1, -1, 6,
-+ 11, 46, 47, 28, -1, -1, 11, 46, 47, 28,
-+ 45, 44, -1, -1, 22, 11, -1, -1, 21, 11,
-+ 47, -1
- };
-
--#endif
--
--#if YYDEBUG != 0
--static const short yyrline[] = { 0,
-- 163, 175, 176, 184, 185, 188, 202, 207, 212, 231,
-- 236, 243, 247, 254, 278, 282, 288, 301, 318, 322,
-- 329, 339, 343, 350, 354, 360, 367, 374, 380, 390,
-- 394, 400, 404, 410, 414, 431, 437, 454, 458, 474,
-- 480, 497, 501, 507, 511
-+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-+static const unsigned short int yyrline[] =
-+{
-+ 0, 167, 167, 178, 179, 187, 188, 192, 206, 206,
-+ 216, 234, 239, 247, 250, 258, 282, 285, 292, 304,
-+ 323, 326, 334, 344, 347, 355, 358, 365, 371, 378,
-+ 384, 395, 398, 405, 408, 415, 418, 436, 435, 459,
-+ 462, 479, 478, 502, 505, 512, 515
- };
- #endif
-
--
--#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
--
--static const char * const yytname[] = { "$","error","$undefined.","TOK_BREAK",
--"TOK_CASE","TOK_DEF","TOK_DEFAULT","TOK_LENGTH","TOK_MULTI","TOK_RECOVER","TOK_ABORT",
--"TOK_ID","TOK_INCLUDE","TOK_STRING","'='","'{'","'}'","'<'","'-'","'>'","'@'",
--"','","':'","all","includes","structures","structure","rep_block","@1","block",
--"fields","field","opt_break","field_cont","opt_pos","decimal","opt_more","opt_val",
--"value","opt_recover","opt_name_list","tags","@2","rep_tags","@3","opt_id","list", NULL
-+#if YYDEBUG || YYERROR_VERBOSE
-+/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
-+ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-+static const char *const yytname[] =
-+{
-+ "$end", "error", "$undefined", "TOK_BREAK", "TOK_CASE", "TOK_DEF",
-+ "TOK_DEFAULT", "TOK_LENGTH", "TOK_MULTI", "TOK_RECOVER", "TOK_ABORT",
-+ "TOK_ID", "TOK_INCLUDE", "TOK_STRING", "'='", "'{'", "'}'", "'<'", "'-'",
-+ "'>'", "'@'", "','", "':'", "$accept", "all", "includes", "structures",
-+ "structure", "rep_block", "@1", "block", "fields", "field", "opt_break",
-+ "field_cont", "opt_pos", "decimal", "opt_more", "opt_val", "value",
-+ "opt_recover", "opt_name_list", "tags", "@2", "rep_tags", "@3", "opt_id",
-+ "list", 0
- };
- #endif
-
--static const short yyr1[] = { 0,
-- 23, 24, 24, 25, 25, 26, 28, 27, 29, 29,
-- 29, 30, 30, 31, 32, 32, 33, 33, 34, 34,
-- 35, 36, 36, 37, 37, 38, 38, 38, 38, 39,
-- 39, 40, 40, 41, 41, 42, 41, 43, 43, 44,
-- 43, 45, 45, 46, 46
-+# ifdef YYPRINT
-+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
-+ token YYLEX-NUM. */
-+static const unsigned short int yytoknum[] =
-+{
-+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
-+ 265, 266, 267, 268, 61, 123, 125, 60, 45, 62,
-+ 64, 44, 58
- };
-+# endif
-
--static const short yyr2[] = { 0,
-- 3, 0, 2, 0, 2, 4, 0, 2, 1, 3,
-- 2, 0, 2, 5, 0, 1, 3, 5, 0, 2,
-- 1, 0, 2, 0, 2, 1, 4, 4, 3, 0,
-- 2, 0, 1, 0, 5, 0, 6, 0, 5, 0,
-- 6, 0, 2, 0, 3
-+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-+static const unsigned char yyr1[] =
-+{
-+ 0, 23, 24, 25, 25, 26, 26, 27, 29, 28,
-+ 30, 30, 30, 31, 31, 32, 33, 33, 34, 34,
-+ 35, 35, 36, 37, 37, 38, 38, 39, 39, 39,
-+ 39, 40, 40, 41, 41, 42, 42, 43, 42, 44,
-+ 44, 45, 44, 46, 46, 47, 47
- };
-
--static const short yydefact[] = { 2,
-- 2, 4, 3, 0, 0, 0, 9, 12, 5, 1,
-- 0, 11, 16, 0, 12, 0, 0, 10, 13, 32,
-- 6, 33, 0, 0, 21, 0, 14, 19, 0, 0,
-- 22, 17, 20, 0, 0, 23, 24, 30, 18, 0,
-- 0, 0, 26, 25, 0, 34, 38, 31, 0, 0,
-- 42, 0, 0, 42, 0, 29, 42, 0, 44, 27,
-- 42, 44, 28, 44, 43, 0, 0, 44, 7, 0,
-- 44, 36, 7, 40, 0, 35, 45, 34, 39, 38,
-- 8, 37, 41, 0, 0, 0
-+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-+static const unsigned char yyr2[] =
-+{
-+ 0, 2, 3, 0, 2, 0, 2, 4, 0, 2,
-+ 1, 3, 2, 0, 2, 5, 0, 1, 3, 5,
-+ 0, 2, 1, 0, 2, 0, 2, 1, 4, 4,
-+ 3, 0, 2, 0, 1, 0, 5, 0, 6, 0,
-+ 5, 0, 6, 0, 2, 0, 3
- };
-
--static const short yydefgoto[] = { 84,
-- 2, 4, 9, 74, 75, 10, 14, 15, 16, 27,
-- 31, 28, 35, 39, 44, 45, 23, 52, 78, 55,
-- 80, 59, 67
-+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
-+ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
-+ means the default is an error. */
-+static const unsigned char yydefact[] =
-+{
-+ 3, 3, 0, 5, 4, 1, 0, 0, 0, 10,
-+ 13, 6, 2, 0, 12, 17, 0, 13, 0, 0,
-+ 11, 14, 33, 7, 34, 0, 0, 22, 0, 15,
-+ 20, 0, 0, 23, 18, 21, 0, 0, 24, 25,
-+ 31, 19, 0, 0, 0, 27, 26, 0, 35, 39,
-+ 32, 0, 0, 43, 0, 0, 43, 0, 30, 43,
-+ 0, 45, 28, 43, 45, 29, 45, 44, 0, 0,
-+ 45, 8, 0, 45, 37, 8, 41, 0, 36, 46,
-+ 35, 40, 39, 9, 38, 42
- };
-
--static const short yypact[] = { -8,
-- -8,-32768,-32768, -4, 3, 17,-32768, -1,-32768,-32768,
-- 20,-32768,-32768, 21, -1, 22, 11,-32768,-32768, 23,
---32768,-32768, 24, -3,-32768, 27,-32768, 15, 25, 27,
-- 26,-32768,-32768, 28, 29,-32768, 31, 9,-32768, 34,
-- 36, 32,-32768,-32768, 33, 18, 19,-32768, 11, 35,
-- 30, 38, 44, 30, 40,-32768, 30, 46, 39,-32768,
-- 30, 39,-32768, 39,-32768, 48, 11, 39,-32768, 11,
-- 39,-32768,-32768,-32768, 11,-32768,-32768, 18,-32768, 19,
---32768,-32768,-32768, 42, 61,-32768
-+/* YYDEFGOTO[NTERM-NUM]. */
-+static const yysigned_char yydefgoto[] =
-+{
-+ -1, 2, 3, 6, 11, 76, 77, 12, 16, 17,
-+ 18, 29, 33, 30, 37, 41, 46, 47, 25, 54,
-+ 80, 57, 82, 61, 69
- };
-
--static const short yypgoto[] = {-32768,
-- 62,-32768,-32768, -11,-32768, -17, 49,-32768,-32768,-32768,
---32768, 1,-32768,-32768,-32768,-32768,-32768, -13,-32768, -14,
---32768, -38, -59
-+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
-+ STATE-NUM. */
-+#define YYPACT_NINF -62
-+static const yysigned_char yypact[] =
-+{
-+ -8, -8, 14, -62, -62, -62, -4, 16, 17, -62,
-+ -1, -62, -62, 20, -62, -62, 21, -1, 22, 11,
-+ -62, -62, 23, -62, -62, 24, -3, -62, 27, -62,
-+ 25, 28, 27, 30, -62, -62, 29, 33, -62, 32,
-+ 9, -62, 34, 39, 31, -62, -62, 36, 18, 19,
-+ -62, 11, 37, 35, 40, 44, 35, 43, -62, 35,
-+ 49, 41, -62, 35, 41, -62, 41, -62, 50, 11,
-+ 41, -62, 11, 41, -62, -62, -62, 11, -62, -62,
-+ 18, -62, 19, -62, -62, -62
- };
-
--
--#define YYLAST 66
--
--
--static const short yytable[] = { 21,
-- 5, 13, 69, 1, 70, 6, 7, 25, 73, -15,
-- 8, 77, 40, 11, 26, 62, 41, 42, 64, 43,
-- 6, 7, 68, 50, 53, 8, 29, 12, 51, 54,
-- 33, 56, 20, 17, 30, 22, 18, 25, 36, 49,
-- 24, 85, 48, 32, 38, 57, 34, 37, 46, 72,
-- 47, 58, 76, 60, 61, 63, 65, 81, 71, 66,
-- 86, 79, 3, 19, 82, 83
-+/* YYPGOTO[NTERM-NUM]. */
-+static const yysigned_char yypgoto[] =
-+{
-+ -62, -62, 38, -62, -62, -31, -62, -19, 46, -62,
-+ -62, -62, -62, 3, -62, -62, -62, -62, -62, -16,
-+ -62, -17, -62, -40, -61
- };
-
--static const short yycheck[] = { 17,
-- 5, 3, 62, 12, 64, 10, 11, 11, 68, 11,
-- 15, 71, 4, 11, 18, 54, 8, 9, 57, 11,
-- 10, 11, 61, 6, 6, 15, 26, 11, 11, 11,
-- 30, 49, 11, 14, 20, 13, 16, 11, 11, 7,
-- 17, 0, 11, 19, 14, 11, 21, 19, 15, 67,
-- 15, 22, 70, 16, 11, 16, 11, 75, 11, 21,
-- 0, 73, 1, 15, 78, 80
-+/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
-+ positive, shift that token. If negative, reduce the rule which
-+ number is the opposite. If zero, do what YYDEFACT says.
-+ If YYTABLE_NINF, syntax error. */
-+#define YYTABLE_NINF -17
-+static const yysigned_char yytable[] =
-+{
-+ 23, 7, 15, 71, 1, 72, 8, 9, 27, 75,
-+ -16, 10, 79, 42, 5, 28, 64, 43, 44, 66,
-+ 45, 8, 9, 70, 52, 55, 10, 13, 14, 53,
-+ 56, 31, 58, 22, 19, 35, 24, 20, 27, 4,
-+ 38, 26, 50, 51, 81, 32, 40, 34, 59, 48,
-+ 74, 36, 39, 78, 49, 63, 62, 60, 83, 65,
-+ 67, 73, 68, 21, 84, 85
- };
--/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
--#line 3 "/usr/lib/bison.simple"
--/* This file comes from bison-1.28. */
-
--/* Skeleton output parser for bison,
-- Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
--
--/* As a special exception, when this file is copied by Bison into a
-- Bison output file, you may use that output file without restriction.
-- This special exception was added by the Free Software Foundation
-- in version 1.24 of Bison. */
-+static const unsigned char yycheck[] =
-+{
-+ 19, 5, 3, 64, 12, 66, 10, 11, 11, 70,
-+ 11, 15, 73, 4, 0, 18, 56, 8, 9, 59,
-+ 11, 10, 11, 63, 6, 6, 15, 11, 11, 11,
-+ 11, 28, 51, 11, 14, 32, 13, 16, 11, 1,
-+ 11, 17, 11, 7, 75, 20, 14, 19, 11, 15,
-+ 69, 21, 19, 72, 15, 11, 16, 22, 77, 16,
-+ 11, 11, 21, 17, 80, 82
-+};
-
--/* This is the parser code that is written into each bison parser
-- when the %semantic_parser declaration is not specified in the grammar.
-- It was written by Richard Stallman by simplifying the hairy parser
-- used when %semantic_parser is specified. */
--
--#ifndef YYSTACK_USE_ALLOCA
--#ifdef alloca
--#define YYSTACK_USE_ALLOCA
--#else /* alloca not defined */
--#ifdef __GNUC__
--#define YYSTACK_USE_ALLOCA
--#define alloca __builtin_alloca
--#else /* not GNU C. */
--#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
--#define YYSTACK_USE_ALLOCA
--#include <alloca.h>
--#else /* not sparc */
--/* We think this test detects Watcom and Microsoft C. */
--/* This used to test MSDOS, but that is a bad idea
-- since that symbol is in the user namespace. */
--#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
--#if 0 /* No need for malloc.h, which pollutes the namespace;
-- instead, just don't use alloca. */
--#include <malloc.h>
--#endif
--#else /* not MSDOS, or __TURBOC__ */
--#if defined(_AIX)
--/* I don't know what this was needed for, but it pollutes the namespace.
-- So I turned it off. rms, 2 May 1997. */
--/* #include <malloc.h> */
-- #pragma alloca
--#define YYSTACK_USE_ALLOCA
--#else /* not MSDOS, or __TURBOC__, or _AIX */
--#if 0
--#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
-- and on HPUX 10. Eventually we can turn this on. */
--#define YYSTACK_USE_ALLOCA
--#define alloca __builtin_alloca
--#endif /* __hpux */
--#endif
--#endif /* not _AIX */
--#endif /* not MSDOS, or __TURBOC__ */
--#endif /* not sparc */
--#endif /* not GNU C */
--#endif /* alloca not defined */
--#endif /* YYSTACK_USE_ALLOCA not defined */
-+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
-+ symbol of state STATE-NUM. */
-+static const unsigned char yystos[] =
-+{
-+ 0, 12, 24, 25, 25, 0, 26, 5, 10, 11,
-+ 15, 27, 30, 11, 11, 3, 31, 32, 33, 14,
-+ 16, 31, 11, 30, 13, 41, 17, 11, 18, 34,
-+ 36, 36, 20, 35, 19, 36, 21, 37, 11, 19,
-+ 14, 38, 4, 8, 9, 11, 39, 40, 15, 15,
-+ 11, 7, 6, 11, 42, 6, 11, 44, 30, 11,
-+ 22, 46, 16, 11, 46, 16, 46, 11, 21, 47,
-+ 46, 47, 47, 11, 30, 47, 28, 29, 30, 47,
-+ 43, 28, 45, 30, 42, 44
-+};
-
--#ifdef YYSTACK_USE_ALLOCA
--#define YYSTACK_ALLOC alloca
--#else
--#define YYSTACK_ALLOC malloc
-+#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
-+# define YYSIZE_T __SIZE_TYPE__
-+#endif
-+#if ! defined (YYSIZE_T) && defined (size_t)
-+# define YYSIZE_T size_t
-+#endif
-+#if ! defined (YYSIZE_T)
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+#endif
-+#if ! defined (YYSIZE_T)
-+# define YYSIZE_T unsigned int
- #endif
--
--/* Note: there must be only one dollar sign in this file.
-- It is replaced by the list of actions, each action
-- as one case of the switch. */
-
- #define yyerrok (yyerrstatus = 0)
- #define yyclearin (yychar = YYEMPTY)
--#define YYEMPTY -2
-+#define YYEMPTY (-2)
- #define YYEOF 0
-+
- #define YYACCEPT goto yyacceptlab
--#define YYABORT goto yyabortlab
--#define YYERROR goto yyerrlab1
--/* Like YYERROR except do call yyerror.
-- This remains here temporarily to ease the
-- transition to the new meaning of YYERROR, for GCC.
-+#define YYABORT goto yyabortlab
-+#define YYERROR goto yyerrorlab
-+
-+
-+/* Like YYERROR except do call yyerror. This remains here temporarily
-+ to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. */
-+
- #define YYFAIL goto yyerrlab
-+
- #define YYRECOVERING() (!!yyerrstatus)
--#define YYBACKUP(token, value) \
-+
-+#define YYBACKUP(Token, Value) \
- do \
- if (yychar == YYEMPTY && yylen == 1) \
-- { yychar = (token), yylval = (value); \
-- yychar1 = YYTRANSLATE (yychar); \
-+ { \
-+ yychar = (Token); \
-+ yylval = (Value); \
-+ yytoken = YYTRANSLATE (yychar); \
- YYPOPSTACK; \
- goto yybackup; \
- } \
- else \
-- { yyerror ("syntax error: cannot back up"); YYERROR; } \
-+ { \
-+ yyerror ("syntax error: cannot back up");\
-+ YYERROR; \
-+ } \
- while (0)
-
- #define YYTERROR 1
- #define YYERRCODE 256
-
--#ifndef YYPURE
--#define YYLEX yylex()
--#endif
-+/* YYLLOC_DEFAULT -- Compute the default location (before the actions
-+ are run). */
-
--#ifdef YYPURE
--#ifdef YYLSP_NEEDED
--#ifdef YYLEX_PARAM
--#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
--#else
--#define YYLEX yylex(&yylval, &yylloc)
-+#ifndef YYLLOC_DEFAULT
-+# define YYLLOC_DEFAULT(Current, Rhs, N) \
-+ ((Current).first_line = (Rhs)[1].first_line, \
-+ (Current).first_column = (Rhs)[1].first_column, \
-+ (Current).last_line = (Rhs)[N].last_line, \
-+ (Current).last_column = (Rhs)[N].last_column)
- #endif
--#else /* not YYLSP_NEEDED */
-+
-+/* YYLEX -- calling `yylex' with the right arguments. */
-+
- #ifdef YYLEX_PARAM
--#define YYLEX yylex(&yylval, YYLEX_PARAM)
-+# define YYLEX yylex (YYLEX_PARAM)
- #else
--#define YYLEX yylex(&yylval)
--#endif
--#endif /* not YYLSP_NEEDED */
-+# define YYLEX yylex ()
- #endif
-
--/* If nonreentrant, generate the variables here */
-+/* Enable debugging if requested. */
-+#if YYDEBUG
-
--#ifndef YYPURE
-+# ifndef YYFPRINTF
-+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYFPRINTF fprintf
-+# endif
-+
-+# define YYDPRINTF(Args) \
-+do { \
-+ if (yydebug) \
-+ YYFPRINTF Args; \
-+} while (0)
-+
-+# define YYDSYMPRINT(Args) \
-+do { \
-+ if (yydebug) \
-+ yysymprint Args; \
-+} while (0)
-+
-+# define YYDSYMPRINTF(Title, Token, Value, Location) \
-+do { \
-+ if (yydebug) \
-+ { \
-+ YYFPRINTF (stderr, "%s ", Title); \
-+ yysymprint (stderr, \
-+ Token, Value); \
-+ YYFPRINTF (stderr, "\n"); \
-+ } \
-+} while (0)
-
--int yychar; /* the lookahead symbol */
--YYSTYPE yylval; /* the semantic value of the */
-- /* lookahead symbol */
-+/*------------------------------------------------------------------.
-+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-+| TOP (included). |
-+`------------------------------------------------------------------*/
-
--#ifdef YYLSP_NEEDED
--YYLTYPE yylloc; /* location data for the lookahead */
-- /* symbol */
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yy_stack_print (short int *bottom, short int *top)
-+#else
-+static void
-+yy_stack_print (bottom, top)
-+ short int *bottom;
-+ short int *top;
- #endif
-+{
-+ YYFPRINTF (stderr, "Stack now");
-+ for (/* Nothing. */; bottom <= top; ++bottom)
-+ YYFPRINTF (stderr, " %d", *bottom);
-+ YYFPRINTF (stderr, "\n");
-+}
-
--int yynerrs; /* number of parse errors so far */
--#endif /* not YYPURE */
-+# define YY_STACK_PRINT(Bottom, Top) \
-+do { \
-+ if (yydebug) \
-+ yy_stack_print ((Bottom), (Top)); \
-+} while (0)
-
--#if YYDEBUG != 0
--int yydebug; /* nonzero means print parse trace */
--/* Since this is uninitialized, it does not stop multiple parsers
-- from coexisting. */
-+
-+/*------------------------------------------------.
-+| Report that the YYRULE is going to be reduced. |
-+`------------------------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yy_reduce_print (int yyrule)
-+#else
-+static void
-+yy_reduce_print (yyrule)
-+ int yyrule;
- #endif
-+{
-+ int yyi;
-+ unsigned int yylno = yyrline[yyrule];
-+ YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
-+ yyrule - 1, yylno);
-+ /* Print the symbols being reduced, and their result. */
-+ for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
-+ YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
-+ YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
-+}
-
--/* YYINITDEPTH indicates the initial size of the parser's stacks */
-+# define YY_REDUCE_PRINT(Rule) \
-+do { \
-+ if (yydebug) \
-+ yy_reduce_print (Rule); \
-+} while (0)
-+
-+/* Nonzero means print parse trace. It is left uninitialized so that
-+ multiple parsers can coexist. */
-+int yydebug;
-+#else /* !YYDEBUG */
-+# define YYDPRINTF(Args)
-+# define YYDSYMPRINT(Args)
-+# define YYDSYMPRINTF(Title, Token, Value, Location)
-+# define YY_STACK_PRINT(Bottom, Top)
-+# define YY_REDUCE_PRINT(Rule)
-+#endif /* !YYDEBUG */
-
-+
-+/* YYINITDEPTH -- initial size of the parser's stacks. */
- #ifndef YYINITDEPTH
--#define YYINITDEPTH 200
-+# define YYINITDEPTH 200
- #endif
-
--/* YYMAXDEPTH is the maximum size the stacks can grow to
-- (effective only if the built-in stack extension method is used). */
-+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
-+ if the built-in stack extension method is used).
-+
-+ Do not make this value too large; the results are undefined if
-+ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
-+ evaluated with infinite-precision integer arithmetic. */
-
--#if YYMAXDEPTH == 0
--#undef YYMAXDEPTH
-+#if defined (YYMAXDEPTH) && YYMAXDEPTH == 0
-+# undef YYMAXDEPTH
- #endif
-
- #ifndef YYMAXDEPTH
--#define YYMAXDEPTH 10000
-+# define YYMAXDEPTH 10000
- #endif
-+
- \f
--/* Define __yy_memcpy. Note that the size argument
-- should be passed with type unsigned int, because that is what the non-GCC
-- definitions require. With GCC, __builtin_memcpy takes an arg
-- of type size_t, but it can handle unsigned int. */
--
--#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
--#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
--#else /* not GNU C or C++ */
--#ifndef __cplusplus
-
--/* This is the most reliable way to avoid incompatibilities
-- in available built-in functions on various systems. */
--static void
--__yy_memcpy (to, from, count)
-- char *to;
-- char *from;
-- unsigned int count;
--{
-- register char *f = from;
-- register char *t = to;
-- register int i = count;
-+#if YYERROR_VERBOSE
-+
-+# ifndef yystrlen
-+# if defined (__GLIBC__) && defined (_STRING_H)
-+# define yystrlen strlen
-+# else
-+/* Return the length of YYSTR. */
-+static YYSIZE_T
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystrlen (const char *yystr)
-+# else
-+yystrlen (yystr)
-+ const char *yystr;
-+# endif
-+{
-+ register const char *yys = yystr;
-+
-+ while (*yys++ != '\0')
-+ continue;
-
-- while (i-- > 0)
-- *t++ = *f++;
-+ return yys - yystr - 1;
- }
-+# endif
-+# endif
-
--#else /* __cplusplus */
-+# ifndef yystpcpy
-+# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
-+# define yystpcpy stpcpy
-+# else
-+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
-+ YYDEST. */
-+static char *
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystpcpy (char *yydest, const char *yysrc)
-+# else
-+yystpcpy (yydest, yysrc)
-+ char *yydest;
-+ const char *yysrc;
-+# endif
-+{
-+ register char *yyd = yydest;
-+ register const char *yys = yysrc;
-+
-+ while ((*yyd++ = *yys++) != '\0')
-+ continue;
-+
-+ return yyd - 1;
-+}
-+# endif
-+# endif
-+
-+#endif /* !YYERROR_VERBOSE */
-+
-+\f
-+
-+#if YYDEBUG
-+/*--------------------------------.
-+| Print this symbol on YYOUTPUT. |
-+`--------------------------------*/
-
--/* This is the most reliable way to avoid incompatibilities
-- in available built-in functions on various systems. */
-+#if defined (__STDC__) || defined (__cplusplus)
- static void
--__yy_memcpy (char *to, char *from, unsigned int count)
-+yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
-+#else
-+static void
-+yysymprint (yyoutput, yytype, yyvaluep)
-+ FILE *yyoutput;
-+ int yytype;
-+ YYSTYPE *yyvaluep;
-+#endif
- {
-- register char *t = to;
-- register char *f = from;
-- register int i = count;
-+ /* Pacify ``unused variable'' warnings. */
-+ (void) yyvaluep;
-+
-+ if (yytype < YYNTOKENS)
-+ {
-+ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
-+# ifdef YYPRINT
-+ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-+# endif
-+ }
-+ else
-+ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
-- while (i-- > 0)
-- *t++ = *f++;
-+ switch (yytype)
-+ {
-+ default:
-+ break;
-+ }
-+ YYFPRINTF (yyoutput, ")");
- }
-
-+#endif /* ! YYDEBUG */
-+/*-----------------------------------------------.
-+| Release the memory associated to this symbol. |
-+`-----------------------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yydestruct (int yytype, YYSTYPE *yyvaluep)
-+#else
-+static void
-+yydestruct (yytype, yyvaluep)
-+ int yytype;
-+ YYSTYPE *yyvaluep;
- #endif
--#endif
-+{
-+ /* Pacify ``unused variable'' warnings. */
-+ (void) yyvaluep;
-+
-+ switch (yytype)
-+ {
-+
-+ default:
-+ break;
-+ }
-+}
- \f
--#line 217 "/usr/lib/bison.simple"
-
--/* The user can define YYPARSE_PARAM as the name of an argument to be passed
-- into yyparse. The argument should have type void *.
-- It should actually point to an object.
-- Grammar actions can access the variable by casting it
-- to the proper pointer type. */
-+/* Prevent warnings from -Wmissing-prototypes. */
-
- #ifdef YYPARSE_PARAM
--#ifdef __cplusplus
--#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
--#define YYPARSE_PARAM_DECL
--#else /* not __cplusplus */
--#define YYPARSE_PARAM_ARG YYPARSE_PARAM
--#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
--#endif /* not __cplusplus */
--#else /* not YYPARSE_PARAM */
--#define YYPARSE_PARAM_ARG
--#define YYPARSE_PARAM_DECL
--#endif /* not YYPARSE_PARAM */
-+# if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void *YYPARSE_PARAM);
-+# else
-+int yyparse ();
-+# endif
-+#else /* ! YYPARSE_PARAM */
-+#if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void);
-+#else
-+int yyparse ();
-+#endif
-+#endif /* ! YYPARSE_PARAM */
-+
-+
-+
-+/* The lookahead symbol. */
-+int yychar;
-+
-+/* The semantic value of the lookahead symbol. */
-+YYSTYPE yylval;
-+
-+/* Number of syntax errors so far. */
-+int yynerrs;
-+
-+
-+
-+/*----------.
-+| yyparse. |
-+`----------*/
-
--/* Prevent warning if -Wstrict-prototypes. */
--#ifdef __GNUC__
- #ifdef YYPARSE_PARAM
--int yyparse (void *);
-+# if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void *YYPARSE_PARAM)
-+# else
-+int yyparse (YYPARSE_PARAM)
-+ void *YYPARSE_PARAM;
-+# endif
-+#else /* ! YYPARSE_PARAM */
-+#if defined (__STDC__) || defined (__cplusplus)
-+int
-+yyparse (void)
- #else
--int yyparse (void);
-+int
-+yyparse ()
-+
- #endif
- #endif
--
--int
--yyparse(YYPARSE_PARAM_ARG)
-- YYPARSE_PARAM_DECL
- {
-+
- register int yystate;
- register int yyn;
-- register short *yyssp;
-+ int yyresult;
-+ /* Number of tokens to shift before error messages enabled. */
-+ int yyerrstatus;
-+ /* Lookahead token as an internal (translated) token number. */
-+ int yytoken = 0;
-+
-+ /* Three stacks and their tools:
-+ `yyss': related to states,
-+ `yyvs': related to semantic values,
-+ `yyls': related to locations.
-+
-+ Refer to the stacks thru separate pointers, to allow yyoverflow
-+ to reallocate them elsewhere. */
-+
-+ /* The state stack. */
-+ short int yyssa[YYINITDEPTH];
-+ short int *yyss = yyssa;
-+ register short int *yyssp;
-+
-+ /* The semantic value stack. */
-+ YYSTYPE yyvsa[YYINITDEPTH];
-+ YYSTYPE *yyvs = yyvsa;
- register YYSTYPE *yyvsp;
-- int yyerrstatus; /* number of tokens to shift before error messages enabled */
-- int yychar1 = 0; /* lookahead token as an internal (translated) token number */
-
-- short yyssa[YYINITDEPTH]; /* the state stack */
-- YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
-
-- short *yyss = yyssa; /* refer to the stacks thru separate pointers */
-- YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
-
--#ifdef YYLSP_NEEDED
-- YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
-- YYLTYPE *yyls = yylsa;
-- YYLTYPE *yylsp;
--
--#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
--#else
- #define YYPOPSTACK (yyvsp--, yyssp--)
--#endif
-
-- int yystacksize = YYINITDEPTH;
-- int yyfree_stacks = 0;
-+ YYSIZE_T yystacksize = YYINITDEPTH;
-
--#ifdef YYPURE
-- int yychar;
-- YYSTYPE yylval;
-- int yynerrs;
--#ifdef YYLSP_NEEDED
-- YYLTYPE yylloc;
--#endif
--#endif
-+ /* The variables used to return semantic value and location from the
-+ action routines. */
-+ YYSTYPE yyval;
-
-- YYSTYPE yyval; /* the variable used to return */
-- /* semantic values from the action */
-- /* routines */
-
-+ /* When reducing, the number of symbols on the RHS of the reduced
-+ rule. */
- int yylen;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Starting parse\n");
--#endif
-+ YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
-@@ -639,110 +1015,97 @@
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
-
-- yyssp = yyss - 1;
-+ yyssp = yyss;
- yyvsp = yyvs;
--#ifdef YYLSP_NEEDED
-- yylsp = yyls;
--#endif
-
--/* Push a new state, which is found in yystate . */
--/* In all cases, when you get here, the value and location stacks
-- have just been pushed. so pushing a state here evens the stacks. */
--yynewstate:
-
-- *++yyssp = yystate;
-+ goto yysetstate;
-
-- if (yyssp >= yyss + yystacksize - 1)
-- {
-- /* Give user a chance to reallocate the stack */
-- /* Use copies of these so that the &'s don't force the real ones into memory. */
-- YYSTYPE *yyvs1 = yyvs;
-- short *yyss1 = yyss;
--#ifdef YYLSP_NEEDED
-- YYLTYPE *yyls1 = yyls;
--#endif
-+/*------------------------------------------------------------.
-+| yynewstate -- Push a new state, which is found in yystate. |
-+`------------------------------------------------------------*/
-+ yynewstate:
-+ /* In all cases, when you get here, the value and location stacks
-+ have just been pushed. so pushing a state here evens the stacks.
-+ */
-+ yyssp++;
-
-+ yysetstate:
-+ *yyssp = yystate;
-+
-+ if (yyss + yystacksize - 1 <= yyssp)
-+ {
- /* Get the current used size of the three stacks, in elements. */
-- int size = yyssp - yyss + 1;
-+ YYSIZE_T yysize = yyssp - yyss + 1;
-
- #ifdef yyoverflow
-- /* Each stack pointer address is followed by the size of
-- the data in use in that stack, in bytes. */
--#ifdef YYLSP_NEEDED
-- /* This used to be a conditional around just the two extra args,
-- but that might be undefined if yyoverflow is a macro. */
-- yyoverflow("parser stack overflow",
-- &yyss1, size * sizeof (*yyssp),
-- &yyvs1, size * sizeof (*yyvsp),
-- &yyls1, size * sizeof (*yylsp),
-- &yystacksize);
--#else
-- yyoverflow("parser stack overflow",
-- &yyss1, size * sizeof (*yyssp),
-- &yyvs1, size * sizeof (*yyvsp),
-- &yystacksize);
--#endif
--
-- yyss = yyss1; yyvs = yyvs1;
--#ifdef YYLSP_NEEDED
-- yyls = yyls1;
--#endif
-+ {
-+ /* Give user a chance to reallocate the stack. Use copies of
-+ these so that the &'s don't force the real ones into
-+ memory. */
-+ YYSTYPE *yyvs1 = yyvs;
-+ short int *yyss1 = yyss;
-+
-+
-+ /* Each stack pointer address is followed by the size of the
-+ data in use in that stack, in bytes. This used to be a
-+ conditional around just the two extra args, but that might
-+ be undefined if yyoverflow is a macro. */
-+ yyoverflow ("parser stack overflow",
-+ &yyss1, yysize * sizeof (*yyssp),
-+ &yyvs1, yysize * sizeof (*yyvsp),
-+
-+ &yystacksize);
-+
-+ yyss = yyss1;
-+ yyvs = yyvs1;
-+ }
- #else /* no yyoverflow */
-+# ifndef YYSTACK_RELOCATE
-+ goto yyoverflowlab;
-+# else
- /* Extend the stack our own way. */
-- if (yystacksize >= YYMAXDEPTH)
-- {
-- yyerror("parser stack overflow");
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
--#endif
-- }
-- return 2;
-- }
-+ if (YYMAXDEPTH <= yystacksize)
-+ goto yyoverflowlab;
- yystacksize *= 2;
-- if (yystacksize > YYMAXDEPTH)
-+ if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
--#ifndef YYSTACK_USE_ALLOCA
-- yyfree_stacks = 1;
--#endif
-- yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
-- __yy_memcpy ((char *)yyss, (char *)yyss1,
-- size * (unsigned int) sizeof (*yyssp));
-- yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
-- __yy_memcpy ((char *)yyvs, (char *)yyvs1,
-- size * (unsigned int) sizeof (*yyvsp));
--#ifdef YYLSP_NEEDED
-- yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
-- __yy_memcpy ((char *)yyls, (char *)yyls1,
-- size * (unsigned int) sizeof (*yylsp));
--#endif
-+
-+ {
-+ short int *yyss1 = yyss;
-+ union yyalloc *yyptr =
-+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
-+ if (! yyptr)
-+ goto yyoverflowlab;
-+ YYSTACK_RELOCATE (yyss);
-+ YYSTACK_RELOCATE (yyvs);
-+
-+# undef YYSTACK_RELOCATE
-+ if (yyss1 != yyssa)
-+ YYSTACK_FREE (yyss1);
-+ }
-+# endif
- #endif /* no yyoverflow */
-
-- yyssp = yyss + size - 1;
-- yyvsp = yyvs + size - 1;
--#ifdef YYLSP_NEEDED
-- yylsp = yyls + size - 1;
--#endif
-+ yyssp = yyss + yysize - 1;
-+ yyvsp = yyvs + yysize - 1;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Stack size increased to %d\n", yystacksize);
--#endif
-
-- if (yyssp >= yyss + yystacksize - 1)
-+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
-+ (unsigned long int) yystacksize));
-+
-+ if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Entering state %d\n", yystate);
--#endif
-+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- goto yybackup;
-- yybackup:
-+
-+/*-----------.
-+| yybackup. |
-+`-----------*/
-+yybackup:
-
- /* Do appropriate processing given the current state. */
- /* Read a lookahead token if we need one and don't already have one. */
-@@ -751,154 +1114,120 @@
- /* First try to decide what to do without reference to lookahead token. */
-
- yyn = yypact[yystate];
-- if (yyn == YYFLAG)
-+ if (yyn == YYPACT_NINF)
- goto yydefault;
-
- /* Not known => get a lookahead token if don't already have one. */
-
-- /* yychar is either YYEMPTY or YYEOF
-- or a valid token in external form. */
--
-+ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
- if (yychar == YYEMPTY)
- {
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Reading a token: ");
--#endif
-+ YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
-- /* Convert token to internal form (in yychar1) for indexing tables with */
--
-- if (yychar <= 0) /* This means end of input. */
-+ if (yychar <= YYEOF)
- {
-- yychar1 = 0;
-- yychar = YYEOF; /* Don't call YYLEX any more */
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Now at end of input.\n");
--#endif
-+ yychar = yytoken = YYEOF;
-+ YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
-- yychar1 = YYTRANSLATE(yychar);
--
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
-- /* Give the individual parser a way to print the precise meaning
-- of a token, for further debugging info. */
--#ifdef YYPRINT
-- YYPRINT (stderr, yychar, yylval);
--#endif
-- fprintf (stderr, ")\n");
-- }
--#endif
-+ yytoken = YYTRANSLATE (yychar);
-+ YYDSYMPRINTF ("Next token is", yytoken, &yylval, &yylloc);
- }
-
-- yyn += yychar1;
-- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
-+ /* If the proper action on seeing token YYTOKEN is to reduce or to
-+ detect an error, take that action. */
-+ yyn += yytoken;
-+ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
--
- yyn = yytable[yyn];
--
-- /* yyn is what to do for this token type in this state.
-- Negative => reduce, -yyn is rule number.
-- Positive => shift, yyn is new state.
-- New state is final state => don't bother to shift,
-- just return success.
-- 0, or most negative number => error. */
--
-- if (yyn < 0)
-+ if (yyn <= 0)
- {
-- if (yyn == YYFLAG)
-+ if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-- else if (yyn == 0)
-- goto yyerrlab;
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- /* Shift the lookahead token. */
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
--#endif
-+ YYDPRINTF ((stderr, "Shifting token %s, ", yytname[yytoken]));
-
- /* Discard the token being shifted unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
-
- *++yyvsp = yylval;
--#ifdef YYLSP_NEEDED
-- *++yylsp = yylloc;
--#endif
-
-- /* count tokens shifted since error; after three, turn off error status. */
-- if (yyerrstatus) yyerrstatus--;
-+
-+ /* Count tokens shifted since error; after three, turn off error
-+ status. */
-+ if (yyerrstatus)
-+ yyerrstatus--;
-
- yystate = yyn;
- goto yynewstate;
-
--/* Do the default action for the current state. */
--yydefault:
-
-+/*-----------------------------------------------------------.
-+| yydefault -- do the default action for the current state. |
-+`-----------------------------------------------------------*/
-+yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
-+ goto yyreduce;
-
--/* Do a reduction. yyn is the number of a rule to reduce with. */
-+
-+/*-----------------------------.
-+| yyreduce -- Do a reduction. |
-+`-----------------------------*/
- yyreduce:
-+ /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-- if (yylen > 0)
-- yyval = yyvsp[1-yylen]; /* implement default value of the action */
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- int i;
-+ /* If YYLEN is nonzero, implement the default value of the action:
-+ `$$ = $1'.
-
-- fprintf (stderr, "Reducing via rule %d (line %d), ",
-- yyn, yyrline[yyn]);
-+ Otherwise, the following line sets YYVAL to garbage.
-+ This behavior is undocumented and Bison
-+ users should not rely upon it. Assigning to YYVAL
-+ unconditionally makes the parser a bit smaller, and it avoids a
-+ GCC warning that YYVAL may be used uninitialized. */
-+ yyval = yyvsp[1-yylen];
-
-- /* Print the symbols being reduced, and their result. */
-- for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
-- fprintf (stderr, "%s ", yytname[yyrhs[i]]);
-- fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
-- }
--#endif
-
--
-- switch (yyn) {
--
--case 1:
--#line 165 "ql_y.y"
--{
-+ YY_REDUCE_PRINT (yyn);
-+ switch (yyn)
-+ {
-+ case 2:
-+#line 168 "ql_y.y"
-+ {
- STRUCTURE *walk;
-
- def = yyvsp[0].field;
- for (walk = structures; walk; walk = walk->next)
- if (!walk->instances)
- fprintf(stderr,"unused structure: %s\n",walk->id);
-- ;
-- break;}
--case 3:
--#line 177 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 4:
-+#line 180 "ql_y.y"
-+ {
- to_c("#%s\n",yyvsp[-1].str);
- to_test("#%s\n",yyvsp[-1].str);
- if (dump) to_dump("#%s\n",yyvsp[-1].str);
-- ;
-- break;}
--case 6:
--#line 190 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 7:
-+#line 193 "ql_y.y"
-+ {
- STRUCTURE *n;
-
- n = alloc_t(STRUCTURE);
-@@ -907,23 +1236,26 @@
- n->instances = 0;
- n->next = structures;
- structures = n;
-- ;
-- break;}
--case 7:
--#line 203 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 8:
-+#line 206 "ql_y.y"
-+ {
- abort_id = NULL;
-- ;
-- break;}
--case 8:
--#line 207 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 9:
-+#line 210 "ql_y.y"
-+ {
- yyval.field = yyvsp[0].field;
-- ;
-- break;}
--case 9:
--#line 214 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 10:
-+#line 217 "ql_y.y"
-+ {
- STRUCTURE *walk;
-
- for (walk = structures; walk; walk = walk->next)
-@@ -939,38 +1271,43 @@
- yyval.field->my_block = copy_block(walk->block);
- yyval.field->next = NULL;
- abort_id = NULL;
-- ;
-- break;}
--case 10:
--#line 232 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 11:
-+#line 235 "ql_y.y"
-+ {
- yyval.field = yyvsp[-1].field;
- abort_id = NULL;
-- ;
-- break;}
--case 11:
--#line 237 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 12:
-+#line 240 "ql_y.y"
-+ {
- yyval.field = NULL;
- abort_id = yyvsp[0].str;
-- ;
-- break;}
--case 12:
--#line 244 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 13:
-+#line 247 "ql_y.y"
-+ {
- yyval.field = NULL;
-- ;
-- break;}
--case 13:
--#line 248 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 14:
-+#line 251 "ql_y.y"
-+ {
- yyval.field = yyvsp[-1].field;
- yyvsp[-1].field->next = yyvsp[0].field;
-- ;
-- break;}
--case 14:
--#line 256 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 15:
-+#line 259 "ql_y.y"
-+ {
- TAG *walk;
-
- yyval.field = yyvsp[0].field;
-@@ -989,23 +1326,26 @@
- "selections");
- if (*yyval.field->id != '_' && yyval.field->value && yyval.field->value->type == vt_multi)
- yyerror("multi selectors must be unnamed");
-- ;
-- break;}
--case 15:
--#line 279 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 16:
-+#line 282 "ql_y.y"
-+ {
- yyval.num = 0;
-- ;
-- break;}
--case 16:
--#line 283 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 17:
-+#line 286 "ql_y.y"
-+ {
- yyval.num = 1;
-- ;
-- break;}
--case 17:
--#line 290 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 18:
-+#line 293 "ql_y.y"
-+ {
- yyval.field = alloc_t(FIELD);
- yyval.field->size = yyvsp[-1].num;
- yyval.field->var_len = -2; /* hack */
-@@ -1015,140 +1355,159 @@
- yyval.field->value = NULL;
- yyval.field->structure = NULL;
- yyval.field->next = NULL;
-- ;
-- break;}
--case 18:
--#line 302 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 19:
-+#line 305 "ql_y.y"
-+ {
- yyval.field = alloc_t(FIELD);
- yyval.field->size = yyvsp[-4].num;
- yyval.field->var_len = -1;
- yyval.field->pos = yyvsp[-3].num;
- yyval.field->flush = !yyvsp[-2].num;
-- if (yyval.field->pos == -1)
-+ if (yyval.field->pos == -1) {
- if (yyval.field->size & 7)
- yyerror("position required for small fields");
- else yyval.field->pos = 0;
-+ }
- yyval.field->value = yyvsp[0].value;
- yyval.field->structure = NULL;
- yyval.field->next = NULL;
-- ;
-- break;}
--case 19:
--#line 319 "ql_y.y"
--{
-- yyval.num = -1;
-- ;
-- break;}
--case 20:
-+ }
-+ break;
-+
-+ case 20:
- #line 323 "ql_y.y"
--{
-+ {
-+ yyval.num = -1;
-+ }
-+ break;
-+
-+ case 21:
-+#line 327 "ql_y.y"
-+ {
- yyval.num = yyvsp[0].num-1;
- if (yyval.num < 0 || yyval.num > 7) yyerror("invalid position");
-- ;
-- break;}
--case 21:
--#line 331 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 22:
-+#line 335 "ql_y.y"
-+ {
- char *end;
-
- yyval.num = strtoul(yyvsp[0].str,&end,10);
- if (*end) yyerror("no a decimal number");
-- ;
-- break;}
--case 22:
--#line 340 "ql_y.y"
--{
-- yyval.num = 0;
-- ;
-- break;}
--case 23:
-+ }
-+ break;
-+
-+ case 23:
- #line 344 "ql_y.y"
--{
-+ {
-+ yyval.num = 0;
-+ }
-+ break;
-+
-+ case 24:
-+#line 348 "ql_y.y"
-+ {
- if (strcmp(yyvsp[0].str,"more")) yyerror("\"more\" expected");
- yyval.num = 1;
-- ;
-- break;}
--case 24:
--#line 351 "ql_y.y"
--{
-- yyval.value = NULL;
-- ;
-- break;}
--case 25:
-+ }
-+ break;
-+
-+ case 25:
- #line 355 "ql_y.y"
--{
-+ {
-+ yyval.value = NULL;
-+ }
-+ break;
-+
-+ case 26:
-+#line 359 "ql_y.y"
-+ {
- yyval.value = yyvsp[0].value;
-- ;
-- break;}
--case 26:
--#line 362 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 27:
-+#line 366 "ql_y.y"
-+ {
- yyval.value = alloc_t(VALUE);
- yyval.value->type = vt_id;
- yyval.value->id = yyvsp[0].str;
-- ;
-- break;}
--case 27:
--#line 368 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 28:
-+#line 372 "ql_y.y"
-+ {
- yyval.value = alloc_t(VALUE);
- yyval.value->type = vt_case;
- yyval.value->id = NULL;
- yyval.value->tags = yyvsp[-1].tag;
-- ;
-- break;}
--case 28:
--#line 375 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 29:
-+#line 379 "ql_y.y"
-+ {
- yyval.value = alloc_t(VALUE);
- yyval.value->type = vt_multi;
- yyval.value->tags = yyvsp[-1].tag;
-- ;
-- break;}
--case 29:
--#line 381 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 30:
-+#line 385 "ql_y.y"
-+ {
- yyval.value = alloc_t(VALUE);
- yyval.value->type = vt_length;
- yyval.value->recovery = yyvsp[-2].str;
- yyval.value->block = yyvsp[0].field;
- yyval.value->abort_id = abort_id;
-- ;
-- break;}
--case 30:
--#line 391 "ql_y.y"
--{
-- yyval.str = NULL;
-- ;
-- break;}
--case 31:
-+ }
-+ break;
-+
-+ case 31:
- #line 395 "ql_y.y"
--{
-+ {
-+ yyval.str = NULL;
-+ }
-+ break;
-+
-+ case 32:
-+#line 399 "ql_y.y"
-+ {
- yyval.str = yyvsp[0].str;
-- ;
-- break;}
--case 32:
--#line 401 "ql_y.y"
--{
-- yyval.nlist = NULL;
-- ;
-- break;}
--case 33:
-+ }
-+ break;
-+
-+ case 33:
- #line 405 "ql_y.y"
--{
-+ {
-+ yyval.nlist = NULL;
-+ }
-+ break;
-+
-+ case 34:
-+#line 409 "ql_y.y"
-+ {
- yyval.nlist = get_name_list(yyvsp[0].str);
-- ;
-- break;}
--case 34:
--#line 411 "ql_y.y"
--{
-- yyval.tag = NULL;
-- ;
-- break;}
--case 35:
-+ }
-+ break;
-+
-+ case 35:
- #line 415 "ql_y.y"
--{
-+ {
-+ yyval.tag = NULL;
-+ }
-+ break;
-+
-+ case 36:
-+#line 419 "ql_y.y"
-+ {
- yyval.tag = alloc_t(TAG);
- yyval.tag->deflt = 1;
- if (yyvsp[-2].str) {
-@@ -1163,18 +1522,20 @@
- yyval.tag->block = yyvsp[0].field;
- yyval.tag->next = NULL;
- yyval.tag->abort_id = abort_id;
-- ;
-- break;}
--case 36:
--#line 432 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 37:
-+#line 436 "ql_y.y"
-+ {
- yyval.tag = alloc_t(TAG);
- yyval.tag->abort_id = abort_id;
-- ;
-- break;}
--case 37:
--#line 437 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 38:
-+#line 441 "ql_y.y"
-+ {
- yyval.tag = yyvsp[-1].tag;
- yyval.tag->deflt = 0;
- if (yyvsp[-4].str) {
-@@ -1188,17 +1549,19 @@
- yyval.tag->more = yyvsp[-3].list;
- yyval.tag->block = yyvsp[-2].field;
- yyval.tag->next = yyvsp[0].tag;
-- ;
-- break;}
--case 38:
--#line 455 "ql_y.y"
--{
-- yyval.tag = NULL;
-- ;
-- break;}
--case 39:
-+ }
-+ break;
-+
-+ case 39:
- #line 459 "ql_y.y"
--{
-+ {
-+ yyval.tag = NULL;
-+ }
-+ break;
-+
-+ case 40:
-+#line 463 "ql_y.y"
-+ {
- yyval.tag = alloc_t(TAG);
- yyval.tag->deflt = 1;
- if (yyvsp[-2].str) {
-@@ -1212,18 +1575,20 @@
- yyval.tag->more = yyvsp[-1].list;
- yyval.tag->block = yyvsp[0].field;
- yyval.tag->next = NULL;
-- ;
-- break;}
--case 40:
--#line 475 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 41:
-+#line 479 "ql_y.y"
-+ {
- yyval.tag = alloc_t(TAG);
- yyval.tag->abort_id = abort_id;
-- ;
-- break;}
--case 41:
--#line 480 "ql_y.y"
--{
-+ }
-+ break;
-+
-+ case 42:
-+#line 484 "ql_y.y"
-+ {
- yyval.tag = yyvsp[-1].tag;
- yyval.tag->deflt = 0;
- if (yyvsp[-4].str) {
-@@ -1237,254 +1602,266 @@
- yyval.tag->more = yyvsp[-3].list;
- yyval.tag->block = yyvsp[-2].field;
- yyval.tag->next = yyvsp[0].tag;
-- ;
-- break;}
--case 42:
--#line 498 "ql_y.y"
--{
-- yyval.str = NULL;
-- ;
-- break;}
--case 43:
-+ }
-+ break;
-+
-+ case 43:
- #line 502 "ql_y.y"
--{
-+ {
-+ yyval.str = NULL;
-+ }
-+ break;
-+
-+ case 44:
-+#line 506 "ql_y.y"
-+ {
- yyval.str = yyvsp[0].str;
-- ;
-- break;}
--case 44:
--#line 508 "ql_y.y"
--{
-- yyval.list = NULL;
-- ;
-- break;}
--case 45:
-+ }
-+ break;
-+
-+ case 45:
- #line 512 "ql_y.y"
--{
-+ {
-+ yyval.list = NULL;
-+ }
-+ break;
-+
-+ case 46:
-+#line 516 "ql_y.y"
-+ {
- yyval.list = alloc_t(VALUE_LIST);
- yyval.list->value = yyvsp[-1].str;
- yyval.list->next = yyvsp[0].list;
-- ;
-- break;}
--}
-- /* the action file gets copied in in place of this dollarsign */
--#line 543 "/usr/lib/bison.simple"
-+ }
-+ break;
-+
-+
-+ }
-+
-+/* Line 1010 of yacc.c. */
-+#line 1643 "y.tab.c"
- \f
- yyvsp -= yylen;
- yyssp -= yylen;
--#ifdef YYLSP_NEEDED
-- yylsp -= yylen;
--#endif
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- short *ssp1 = yyss - 1;
-- fprintf (stderr, "state stack now");
-- while (ssp1 != yyssp)
-- fprintf (stderr, " %d", *++ssp1);
-- fprintf (stderr, "\n");
-- }
--#endif
-+
-+ YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
-
--#ifdef YYLSP_NEEDED
-- yylsp++;
-- if (yylen == 0)
-- {
-- yylsp->first_line = yylloc.first_line;
-- yylsp->first_column = yylloc.first_column;
-- yylsp->last_line = (yylsp-1)->last_line;
-- yylsp->last_column = (yylsp-1)->last_column;
-- yylsp->text = 0;
-- }
-- else
-- {
-- yylsp->last_line = (yylsp+yylen-1)->last_line;
-- yylsp->last_column = (yylsp+yylen-1)->last_column;
-- }
--#endif
-
-- /* Now "shift" the result of the reduction.
-- Determine what state that goes to,
-- based on the state we popped back to
-- and the rule number reduced by. */
-+ /* Now `shift' the result of the reduction. Determine what state
-+ that goes to, based on the state we popped back to and the rule
-+ number reduced by. */
-
- yyn = yyr1[yyn];
-
-- yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
-- if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-+ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
-+ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
-- yystate = yydefgoto[yyn - YYNTBASE];
-+ yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
--yyerrlab: /* here on detecting error */
-
-- if (! yyerrstatus)
-- /* If not already recovering from an error, report this error. */
-+/*------------------------------------.
-+| yyerrlab -- here on detecting error |
-+`------------------------------------*/
-+yyerrlab:
-+ /* If not already recovering from an error, report this error. */
-+ if (!yyerrstatus)
- {
- ++yynerrs;
--
--#ifdef YYERROR_VERBOSE
-+#if YYERROR_VERBOSE
- yyn = yypact[yystate];
-
-- if (yyn > YYFLAG && yyn < YYLAST)
-+ if (YYPACT_NINF < yyn && yyn < YYLAST)
- {
-- int size = 0;
-- char *msg;
-- int x, count;
--
-- count = 0;
-- /* Start X at -yyn if nec to avoid negative indexes in yycheck. */
-- for (x = (yyn < 0 ? -yyn : 0);
-- x < (sizeof(yytname) / sizeof(char *)); x++)
-- if (yycheck[x + yyn] == x)
-- size += strlen(yytname[x]) + 15, count++;
-- msg = (char *) malloc(size + 15);
-- if (msg != 0)
-+ YYSIZE_T yysize = 0;
-+ int yytype = YYTRANSLATE (yychar);
-+ const char* yyprefix;
-+ char *yymsg;
-+ int yyx;
-+
-+ /* Start YYX at -YYN if negative to avoid negative indexes in
-+ YYCHECK. */
-+ int yyxbegin = yyn < 0 ? -yyn : 0;
-+
-+ /* Stay within bounds of both yycheck and yytname. */
-+ int yychecklim = YYLAST - yyn;
-+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
-+ int yycount = 0;
-+
-+ yyprefix = ", expecting ";
-+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
-+ {
-+ yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
-+ yycount += 1;
-+ if (yycount == 5)
-+ {
-+ yysize = 0;
-+ break;
-+ }
-+ }
-+ yysize += (sizeof ("syntax error, unexpected ")
-+ + yystrlen (yytname[yytype]));
-+ yymsg = (char *) YYSTACK_ALLOC (yysize);
-+ if (yymsg != 0)
- {
-- strcpy(msg, "parse error");
-+ char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
-+ yyp = yystpcpy (yyp, yytname[yytype]);
-
-- if (count < 5)
-+ if (yycount < 5)
- {
-- count = 0;
-- for (x = (yyn < 0 ? -yyn : 0);
-- x < (sizeof(yytname) / sizeof(char *)); x++)
-- if (yycheck[x + yyn] == x)
-+ yyprefix = ", expecting ";
-+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
-- strcat(msg, count == 0 ? ", expecting `" : " or `");
-- strcat(msg, yytname[x]);
-- strcat(msg, "'");
-- count++;
-+ yyp = yystpcpy (yyp, yyprefix);
-+ yyp = yystpcpy (yyp, yytname[yyx]);
-+ yyprefix = " or ";
- }
- }
-- yyerror(msg);
-- free(msg);
-+ yyerror (yymsg);
-+ YYSTACK_FREE (yymsg);
- }
- else
-- yyerror ("parse error; also virtual memory exceeded");
-+ yyerror ("syntax error; also virtual memory exhausted");
- }
- else
- #endif /* YYERROR_VERBOSE */
-- yyerror("parse error");
-+ yyerror ("syntax error");
- }
-
-- goto yyerrlab1;
--yyerrlab1: /* here on error raised explicitly by an action */
-+
-
- if (yyerrstatus == 3)
- {
-- /* if just tried and failed to reuse lookahead token after an error, discard it. */
-+ /* If just tried and failed to reuse lookahead token after an
-+ error, discard it. */
-
-- /* return failure if at end of input */
-- if (yychar == YYEOF)
-- YYABORT;
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
--#endif
-+ if (yychar <= YYEOF)
-+ {
-+ /* If at end of input, pop the error token,
-+ then the rest of the stack, then return failure. */
-+ if (yychar == YYEOF)
-+ for (;;)
-+ {
-+ YYPOPSTACK;
-+ if (yyssp == yyss)
-+ YYABORT;
-+ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
-+ yydestruct (yystos[*yyssp], yyvsp);
-+ }
-+ }
-+ else
-+ {
-+ YYDSYMPRINTF ("Error: discarding", yytoken, &yylval, &yylloc);
-+ yydestruct (yytoken, &yylval);
-+ yychar = YYEMPTY;
-
-- yychar = YYEMPTY;
-+ }
- }
-
-- /* Else will try to reuse lookahead token
-- after shifting the error token. */
--
-- yyerrstatus = 3; /* Each real token shifted decrements this */
-+ /* Else will try to reuse lookahead token after shifting the error
-+ token. */
-+ goto yyerrlab1;
-
-- goto yyerrhandle;
-
--yyerrdefault: /* current state does not do anything special for the error token. */
-+/*---------------------------------------------------.
-+| yyerrorlab -- error raised explicitly by YYERROR. |
-+`---------------------------------------------------*/
-+yyerrorlab:
-
--#if 0
-- /* This is wrong; only states that explicitly want error tokens
-- should shift them. */
-- yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
-- if (yyn) goto yydefault;
-+#ifdef __GNUC__
-+ /* Pacify GCC when the user code never invokes YYERROR and the label
-+ yyerrorlab therefore never appears in user code. */
-+ if (0)
-+ goto yyerrorlab;
- #endif
-
--yyerrpop: /* pop the current state because it cannot handle the error token */
--
-- if (yyssp == yyss) YYABORT;
-- yyvsp--;
-- yystate = *--yyssp;
--#ifdef YYLSP_NEEDED
-- yylsp--;
--#endif
-+ yyvsp -= yylen;
-+ yyssp -= yylen;
-+ yystate = *yyssp;
-+ goto yyerrlab1;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- short *ssp1 = yyss - 1;
-- fprintf (stderr, "Error: state stack now");
-- while (ssp1 != yyssp)
-- fprintf (stderr, " %d", *++ssp1);
-- fprintf (stderr, "\n");
-- }
--#endif
-
--yyerrhandle:
-+/*-------------------------------------------------------------.
-+| yyerrlab1 -- common code for both syntax error and YYERROR. |
-+`-------------------------------------------------------------*/
-+yyerrlab1:
-+ yyerrstatus = 3; /* Each real token shifted decrements this. */
-
-- yyn = yypact[yystate];
-- if (yyn == YYFLAG)
-- goto yyerrdefault;
-+ for (;;)
-+ {
-+ yyn = yypact[yystate];
-+ if (yyn != YYPACT_NINF)
-+ {
-+ yyn += YYTERROR;
-+ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
-+ {
-+ yyn = yytable[yyn];
-+ if (0 < yyn)
-+ break;
-+ }
-+ }
-
-- yyn += YYTERROR;
-- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
-- goto yyerrdefault;
-+ /* Pop the current state because it cannot handle the error token. */
-+ if (yyssp == yyss)
-+ YYABORT;
-
-- yyn = yytable[yyn];
-- if (yyn < 0)
-- {
-- if (yyn == YYFLAG)
-- goto yyerrpop;
-- yyn = -yyn;
-- goto yyreduce;
-+ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
-+ yydestruct (yystos[yystate], yyvsp);
-+ YYPOPSTACK;
-+ yystate = *yyssp;
-+ YY_STACK_PRINT (yyss, yyssp);
- }
-- else if (yyn == 0)
-- goto yyerrpop;
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Shifting error token, ");
--#endif
-+ YYDPRINTF ((stderr, "Shifting error token, "));
-
- *++yyvsp = yylval;
--#ifdef YYLSP_NEEDED
-- *++yylsp = yylloc;
--#endif
-+
-
- yystate = yyn;
- goto yynewstate;
-
-- yyacceptlab:
-- /* YYACCEPT comes here. */
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
--#endif
-- }
-- return 0;
-
-- yyabortlab:
-- /* YYABORT comes here. */
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
-+/*-------------------------------------.
-+| yyacceptlab -- YYACCEPT comes here. |
-+`-------------------------------------*/
-+yyacceptlab:
-+ yyresult = 0;
-+ goto yyreturn;
-+
-+/*-----------------------------------.
-+| yyabortlab -- YYABORT comes here. |
-+`-----------------------------------*/
-+yyabortlab:
-+ yyresult = 1;
-+ goto yyreturn;
-+
-+#ifndef yyoverflow
-+/*----------------------------------------------.
-+| yyoverflowlab -- parser overflow comes here. |
-+`----------------------------------------------*/
-+yyoverflowlab:
-+ yyerror ("parser stack overflow");
-+ yyresult = 2;
-+ /* Fall through. */
-+#endif
-+
-+yyreturn:
-+#ifndef yyoverflow
-+ if (yyss != yyssa)
-+ YYSTACK_FREE (yyss);
- #endif
-- }
-- return 1;
-+ return yyresult;
- }
--#line 518 "ql_y.y"
-+
-+
-+
---- linux-atm-2.4.1.orig/src/qgen/ql_y.y
-+++ linux-atm-2.4.1/src/qgen/ql_y.y
-@@ -17,6 +17,8 @@
- #include "qgen.h"
- #include "file.h"
-
-+extern void yyerror(const char *s);
-+
-
- #define MAX_TOKEN 256
- #define DEFAULT_NAMELIST_FILE "default.nl"
-@@ -58,9 +60,10 @@
- for (walk = strchr(start,0)-1; walk > start && isspace(*walk); walk--)
- *walk = 0;
- if (*start == ':') {
-- if (!(searching = strcmp(start+1,name)))
-+ if (!(searching = strcmp(start+1,name))) {
- if (found) yyerror("multiple entries");
- else found = 1;
-+ }
- continue;
- }
- if (searching) continue;
-@@ -305,10 +308,11 @@
- $$->var_len = -1;
- $$->pos = $2;
- $$->flush = !$3;
-- if ($$->pos == -1)
-+ if ($$->pos == -1) {
- if ($$->size & 7)
- yyerror("position required for small fields");
- else $$->pos = 0;
-+ }
- $$->value = $5;
- $$->structure = NULL;
- $$->next = NULL;
---- linux-atm-2.4.1.orig/src/qgen/ql_l.l
-+++ linux-atm-2.4.1/src/qgen/ql_l.l
-@@ -68,7 +68,7 @@
-
- %%
-
--void yyerror(char *s)
-+void yyerror(const char *s)
- {
- fprintf(stderr,"line %d: %s near \"%s\"\n",lineno,s,yytext);
- exit(1);
---- linux-atm-2.4.1.orig/src/qgen/qlib.c
-+++ linux-atm-2.4.1/src/qgen/qlib.c
-@@ -26,14 +26,14 @@
- #include "op.h"
-
-
--static int debug = 0;
-+static int q_debug = 0;
-
-
- void PREFIX(report)(int severity,const char *msg,...)
- {
- va_list ap;
-
-- if (!debug && severity > Q_ERROR) return;
-+ if (!q_debug && severity > Q_ERROR) return;
- va_start(ap,msg);
- vprintf(msg,ap);
- printf("\n");
-@@ -836,7 +836,7 @@
- Q_DSC dsc;
- int len,c;
-
-- debug = argc != 1;
-+ q_debug = argc != 1;
- len = 0;
- while (scanf("%x",&c) == 1) msg[len++] = c;
- qd_start();
---- linux-atm-2.4.1.orig/src/qgen/qlib.h
-+++ linux-atm-2.4.1/src/qgen/qlib.h
-@@ -23,7 +23,9 @@
- #define Q_FATAL -1
-
-
-+#ifndef DUMP_MODE
- extern int q_dump;
-+#endif
- extern void q_report(int severity,const char *msg,...);
-
- #ifdef DUMP_MODE
---- linux-atm-2.4.1.orig/src/qgen/ql_y.h
-+++ linux-atm-2.4.1/src/qgen/ql_y.h
-@@ -1,4 +1,65 @@
--typedef union {
-+/* A Bison parser, made by GNU Bison 1.875d. */
-+
-+/* Skeleton parser for Yacc-like parsing with Bison,
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* Tokens. */
-+#ifndef YYTOKENTYPE
-+# define YYTOKENTYPE
-+ /* Put the tokens into the symbol table, so that GDB and other debuggers
-+ know about them. */
-+ enum yytokentype {
-+ TOK_BREAK = 258,
-+ TOK_CASE = 259,
-+ TOK_DEF = 260,
-+ TOK_DEFAULT = 261,
-+ TOK_LENGTH = 262,
-+ TOK_MULTI = 263,
-+ TOK_RECOVER = 264,
-+ TOK_ABORT = 265,
-+ TOK_ID = 266,
-+ TOK_INCLUDE = 267,
-+ TOK_STRING = 268
-+ };
-+#endif
-+#define TOK_BREAK 258
-+#define TOK_CASE 259
-+#define TOK_DEF 260
-+#define TOK_DEFAULT 261
-+#define TOK_LENGTH 262
-+#define TOK_MULTI 263
-+#define TOK_RECOVER 264
-+#define TOK_ABORT 265
-+#define TOK_ID 266
-+#define TOK_INCLUDE 267
-+#define TOK_STRING 268
-+
-+
-+
-+
-+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
-+#line 142 "ql_y.y"
-+typedef union YYSTYPE {
- const char *str;
- int num;
- FIELD *field;
-@@ -7,17 +68,14 @@
- TAG *tag;
- NAME_LIST *nlist;
- } YYSTYPE;
--#define TOK_BREAK 257
--#define TOK_CASE 258
--#define TOK_DEF 259
--#define TOK_DEFAULT 260
--#define TOK_LENGTH 261
--#define TOK_MULTI 262
--#define TOK_RECOVER 263
--#define TOK_ABORT 264
--#define TOK_ID 265
--#define TOK_INCLUDE 266
--#define TOK_STRING 267
--
-+/* Line 1285 of yacc.c. */
-+#line 73 "y.tab.h"
-+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-+# define YYSTYPE_IS_DECLARED 1
-+# define YYSTYPE_IS_TRIVIAL 1
-+#endif
-
- extern YYSTYPE yylval;
-+
-+
-+
---- linux-atm-2.4.1.orig/src/qgen/incl.pl
-+++ linux-atm-2.4.1/src/qgen/incl.pl
-@@ -24,7 +24,7 @@
- }
- die "no include file specified" unless defined $last;
- for (@STD,@USR) {
-- next unless defined stat $_."/".$last;
-+ next unless -e "$_/$last";
- print $_."/".$last."\n" || die "print STDOUT: $!";
- exit 0;
- }
---- linux-atm-2.4.1.orig/src/qgen/msg.fmt
-+++ linux-atm-2.4.1/src/qgen/msg.fmt
-@@ -53,7 +53,7 @@
- ATM_TD_FW_PCR_0 { p##fw_pcr_0 <24> } \
- ATM_TD_BW_PCR_0 { p##bw_pcr_0 <24> } \
- ATM_TD_FW_PCR_01 { p##fw_pcr_01 <24> } \
-- ATM_TD_BW_PCR_01 { p##bw_pcr_01 <24> } \
-+ ATM_TD_BW_PCR_01 { p##bw_pcr_01 <24> }
-
- #define TRAFFIC_DESCRIPTOR_VBR(p) \
- ATM_TD_FW_SCR_0 { p##fw_scr_0 <24> } \
-@@ -63,15 +63,15 @@
- ATM_TD_FW_MBS_0 { p##fw_mbs_0 <24> } \
- ATM_TD_BW_MBS_0 { p##bw_mbs_0 <24> } \
- ATM_TD_FW_MBS_01 { p##fw_mbs_01 <24> } \
-- ATM_TD_BW_MBS_01 { p##bw_mbs_01 <24> } \
-+ ATM_TD_BW_MBS_01 { p##bw_mbs_01 <24> }
-
- #define TRAFFIC_DESCRIPTOR_BE(p) \
-- ATM_TD_BEST_EFFORT { p##best_effort <0> } \
-+ ATM_TD_BEST_EFFORT { p##best_effort <0> }
-
- #if defined(UNI40) || defined(DYNAMIC_UNI)
- #define TRAFFIC_DESCRIPTOR_ABR(p) \
- ATM_TD_FW_MCR_01 { p##fw_mcr_01 <24> } \
-- ATM_TD_BW_MCR_01 { p##bw_mcr_01 <24> } \
-+ ATM_TD_BW_MCR_01 { p##bw_mcr_01 <24> }
-
- #else
- #define TRAFFIC_DESCRIPTOR_ABR(p) /* not yet */
---- linux-atm-2.4.1.orig/src/qgen/output
-+++ linux-atm-2.4.1/src/qgen/output
-@@ -0,0 +1,704 @@
-+# 1 "<stdin>"
-+# 1 "<built-in>"
-+# 1 "<command line>"
-+# 1 "<stdin>"
-+
-+
-+
-+
-+
-+# 1 "../../config.h" 1
-+# 7 "<stdin>" 2
-+
-+
-+
-+
-+include "atmsap.h"
-+include "uni.h"
-+# 26 "<stdin>"
-+def ie_aal = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ aal_type <8> = case {
-+ 5 {
-+ _id "atm_aalp" <8> = multi {
-+ ATM_AALP_FW_MAX_SDU {
-+ fw_max_sdu <16>
-+ }
-+ ATM_AALP_BW_MAX_SDU {
-+ bw_max_sdu <16>
-+ }
-+
-+ ATM_AALP_AAL_MODE {
-+ aal_mode <8> # UNI 3.0 only
-+ }
-+
-+ ATM_AALP_SSCS {
-+ sscs_type <8>
-+ }
-+ }
-+ }
-+ }
-+ }
-+}
-+# 90 "<stdin>"
-+def ie_td = { # UNI 3.0 calls this "User Cell Rate"
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _id "atm_td" <8> = multi {
-+ ATM_TD_FW_PCR_0 { _dummy <0> = length {}fw_pcr_0 <24> } ATM_TD_BW_PCR_0 { _dummy <0> = length {}bw_pcr_0 <24> } ATM_TD_FW_PCR_01 { _dummy <0> = length {}fw_pcr_01 <24> } ATM_TD_BW_PCR_01 { _dummy <0> = length {}bw_pcr_01 <24> } ATM_TD_FW_SCR_0 { _dummy <0> = length {}fw_scr_0 <24> } ATM_TD_BW_SCR_0 { _dummy <0> = length {}bw_scr_0 <24> } ATM_TD_FW_SCR_01 { _dummy <0> = length {}fw_scr_01 <24> } ATM_TD_BW_SCR_01 { _dummy <0> = length {}bw_scr_01 <24> } ATM_TD_FW_MBS_0 { _dummy <0> = length {}fw_mbs_0 <24> } ATM_TD_BW_MBS_0 { _dummy <0> = length {}bw_mbs_0 <24> } ATM_TD_FW_MBS_01 { _dummy <0> = length {}fw_mbs_01 <24> } ATM_TD_BW_MBS_01 { _dummy <0> = length {}bw_mbs_01 <24> } ATM_TD_BEST_EFFORT { _dummy <0> = length {}best_effort <0> }
-+# 104 "<stdin>"
-+ ATM_TD_TM_OPT { # @@@ should this also go into the TD macro ?
-+
-+ fw_fdisc "atm_fd" <1@8,more> = ATM_FD_NO
-+ bw_fdisc "atm_fd" <1@7,more> = ATM_FD_NO
-+
-+ bw_tag "atm_tag" <1@2,more> = ATM_TAG_NO
-+ fw_tag "atm_tag" <1@1> = ATM_TAG_NO
-+ }
-+ }
-+ }
-+}
-+
-+
-+def ie_bbcap = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ bearer_class "atm_bc" <5@1,more>
-+ _ext <1@8> = case {
-+ 0 {
-+ _ext <1@8,more> = 1
-+ trans_cap "atm_tc" <7@1>
-+ }
-+ default 1 {}
-+ }
-+ _ext <1@8,more> = 1
-+ susc_clip "atm_stc" <2@6,more> = ATM_STC_NO
-+ upcc "atm_upcc" <2@1> = ATM_UPCC_P2P
-+ }
-+}
-+
-+
-+def ie_bhli = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ hli_type <7@1> = case {
-+
-+
-+ 0 { # ISO
-+ iso_hli <-64>
-+ }
-+ 1 { # User Specific
-+ user_hli <-64>
-+ }
-+
-+ 2 { # High layer profile - UNI 3.0 only
-+ hlp <32>
-+ }
-+
-+ 3 { # Vendor-Specific Application identifier
-+ hli_oui <24>
-+ app_id <32>
-+ }
-+
-+ 4 { # Reference to ITU-T SG 1 B-ISDN Teleservice Recommendation
-+ tobedefined <8>
-+ }
-+
-+ }
-+ }
-+}
-+
-+
-+def ie_blli = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _lid <2@6,more> = multi {
-+ 1 {
-+ _ext <1@8,more> = 1
-+ uil1_proto <5@1>
-+ }
-+ 2 {
-+ uil2_proto "atm_l2" <5@1,more> = case {
-+ ATM_L2_X25_LL,ATM_L2_X25_ML,ATM_L2_HDLC_ARM,
-+ ATM_L2_HDLC_NRM,ATM_L2_HDLC_ABM,ATM_L2_Q922,
-+ ATM_L2_ISO7776 { # CCITT encoding
-+ _ext <1@8> = case {
-+ 0 {
-+ l2_mode "atm_imd" <2@6,more> = ATM_IMD_NORMAL
-+ q933 <2@1,more> = 0
-+ _ext <1@8> = case {
-+ 0 {
-+ window_size <7@1,more>
-+ _ext <1@8> = 1
-+ }
-+ default 1 {}
-+ }
-+ }
-+ default 1 {}
-+ }
-+ }
-+ ATM_L2_USER { # User specified
-+ _ext <1@8> = 0
-+ user_l2 <7@1,more>
-+ _ext <1@8> = 1
-+ }
-+ default ATM_L2_ISO1745,ATM_L2_Q291,ATM_L2_LAPB,
-+ ATM_L2_ISO8802,ATM_L2_X75 { # No additional data
-+ _ext <1@8> = 1
-+ }
-+ }
-+ }
-+ 3 {
-+ uil3_proto "atm_l3" <5@1,more> = case {
-+ ATM_L3_X25,ATM_L3_ISO8208,ATM_L3_X223 { # CCITT coding
-+ _ext <1@8> = case {
-+ 0 {
-+ l3_mode "atm_imd" <2@6,more> = ATM_IMD_NORMAL
-+ _ext <1@8> = case {
-+ 0 {
-+ def_pck_size <4@1,more>
-+ _ext <1@8> = case {
-+ 0 {
-+ _ext <1@8> = 1
-+ pck_win_size <7@1>
-+ }
-+ default 1 {}
-+ }
-+ }
-+ default 1 {}
-+ }
-+ }
-+ default 1 {}
-+ }
-+ }
-+
-+ ATM_L3_H310 { # ITU-T Rec. H.310
-+ _ext <1@8> = case {
-+ 0 {
-+ term_type "atm_tt" <4@1,more> = ATM_TT_RXTX
-+ _ext <1@8> = case {
-+ 0 {
-+ _ext <1@8,more> = 1
-+ fw_mpx_cap "atm_mc" <3@4,more> =
-+ ATM_MC_NONE
-+ bw_mpx_cap "atm_mc" <3@1> = ATM_MC_NONE
-+ }
-+ default 1 {}
-+ }
-+ }
-+ default 1 {}
-+ }
-+ }
-+
-+ ATM_L3_TR9577 { # ISO/IEC TR9577
-+ _ext <1@8> = case {
-+ 0 {
-+ _ext <1@8,more> = 0
-+ ipi_high <7@1> = case {
-+ 0x40 { # SNAP hack
-+ _ext <1@8,more> = 1
-+ _ipi_low <1@7> = case { # ugly
-+ 0 {
-+ _ext <1@8,more> = 1
-+ _snap_id <2@6> = 0
-+ oui <24>
-+ pid <16>
-+ }
-+ default 1 {}
-+ }
-+ }
-+ default 0x0 { # ugly
-+ _ext <1@8,more> = 1
-+ ipi_low <1@7>
-+ }
-+ }
-+ }
-+ default 1 {}
-+ }
-+ }
-+ ATM_L3_USER { # User specified
-+ _ext <1@8> = 0
-+ user_l3 <7@1,more>
-+ _ext <1@8> = 1
-+ }
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+
-+def ie_call_state = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ call_state <6@1>
-+ }
-+}
-+
-+
-+def ie_cdpn = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ _plan "atm_np" <4@1,more> = case {
-+ ATM_NP_E164 {
-+ _type "atm_ton" <3@5> = ATM_TON_INTRNTNL
-+ cdpn_e164 <-96>
-+ }
-+ ATM_NP_AEA { # ATM Endsystem Address
-+ _type "atm_ton" <3@5> = ATM_TON_UNKNOWN
-+ cdpn_esa <-160>
-+ }
-+ }
-+ }
-+}
-+
-+
-+def ie_cdps = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+
-+
-+
-+
-+ cdps_type "atm_sat" <3@5,more> = ATM_SAT_AEA
-+
-+ _oddeven <1@4> = 0
-+ cdps <-160>
-+ }
-+}
-+
-+
-+def ie_cgpn = { # @@@ extend language to allow same trick as for cdpn
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ cgpn_plan "atm_np" <4@1,more>
-+ cgpn_type "atm_ton" <3@5,more>
-+ _ext <1@8> = case {
-+ 0 {
-+ _ext <1@8,more> = 1
-+ pres_ind "atm_prs" <2@6,more> = ATM_PRS_ALLOW
-+ scr_ind "atm_scrn" <2@1> = ATM_SCRN_UP_NS
-+ }
-+ default 1 {}
-+ }
-+ cgpn <-160>
-+ }
-+}
-+
-+
-+def ie_cgps = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+
-+
-+
-+
-+ cgps_type "atm_sat" <3@5,more> = ATM_SAT_AEA
-+
-+ _oddeven <1@4> = 0
-+ cgps <-160>
-+ }
-+}
-+
-+
-+def ie_cause = {
-+ _ext <1@8,more> = 1 cause_cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ location "atm_loc" <4@1> = ATM_LOC_USER
-+ _ext <1@8,more> = 1
-+ cause "atm_cv" <7@1> = case {
-+ ATM_CV_UNALLOC,ATM_CV_NO_ROUTE_DEST,ATM_CV_QOS_UNAVAIL { # Note 2
-+ break
-+ _ext <1@8,more> = 1
-+ pu "atm_pu" <1@4,more> = ATM_PU_USER
-+ na "atm_na" <1@3,more> = ATM_NA_NORMAL
-+ cond2 "atm_cond" <2@1> = ATM_COND_UNKNOWN
-+ }
-+ ATM_CV_CALL_REJ { # Note 3
-+ break
-+ _ext <1@8,more> = 1
-+ cond3 "atm_cond" <2@1,more> = ATM_COND_UNKNOWN
-+ reason <5@3> = case {
-+ ATM_RSN_USER {
-+ user_diag <-216>
-+ }
-+ ATM_RSN_IE_MISS,ATM_RSN_IE_INSUFF {
-+ ie_id3 "atm_ie" <8>
-+ }
-+ }
-+ }
-+ ATM_CV_NUM_CHANGED { # Note 4
-+ break
-+ new_dest <-224> # good luck ...
-+ }
-+ ATM_CV_REJ_CLIR { # Note 5
-+ break
-+ invalid <8> # not supported
-+ }
-+ ATM_CV_ACC_INF_DISC,ATM_CV_INCOMP_DEST,ATM_CV_MAND_IE_MISSING,
-+ ATM_CV_UNKNOWN_IE,ATM_CV_INVALID_IE { # Note 6
-+ break
-+ ie_id6 <-224>
-+ }
-+
-+ ATM_CV_UCR_UNAVAIL_OLD,ATM_CV_UCR_UNAVAIL_NEW { # Note 8
-+
-+
-+
-+
-+
-+
-+
-+ break
-+ ucr_id <-224>
-+ }
-+ ATM_CV_NO_SUCH_CHAN { # Note 9
-+ break
-+ unav_vpci <16>
-+ unav_vci <16>
-+ }
-+ ATM_CV_UNKNOWN_MSG_TYPE,ATM_CV_INCOMP_MSG { # Note 10
-+ break
-+ bad_msg_type "atm_msg" <8>
-+ }
-+ ATM_CV_TIMER_EXP { # Note 11
-+ break
-+ timer <24>
-+ }
-+ default 0 {}
-+ }
-+ }
-+}
-+
-+
-+def ie_conn_id = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ _vp_ass "atm_vpa" <2@4,more> = ATM_VPA_EXPL
-+ _pref_exc "atm_poe" <3@1> = 0
-+ vpi <16>
-+ vci <16>
-+ }
-+}
-+
-+
-+
-+
-+def ie_e2e_tdl = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _id "atm_tdl" <8> = multi {
-+ ATM_TDL_CUM {
-+ cum_delay <16>
-+ }
-+ ATM_TDL_E2EMAX {
-+ max_delay <16>
-+ }
-+ ATM_TDL_NGI {}
-+ }
-+
-+ }
-+}
-+
-+
-+
-+
-+def ie_qos = {
-+# 467 "<stdin>"
-+ _ext <1@8,more> = 1 qos_cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+
-+ qos_fw <8> = 0
-+ qos_bw <8> = 0
-+ }
-+}
-+
-+
-+def ie_bbrep = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ rep_ind <4@1> = 2
-+ }
-+}
-+
-+
-+def ie_restart = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ rst_class <3@1>
-+ }
-+}
-+
-+
-+def ie_bbs_comp = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ bbsc_ind <7@1> = 0x21
-+ }
-+}
-+
-+
-+def ie_tns = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ _net_type "atm_tni" <3@5,more> = ATM_TNI_NNI
-+ _carrier_id "atm_nip" <4@1> = ATM_NIP_CARRIER
-+ net_id <-32>
-+ }
-+}
-+
-+
-+
-+
-+def ie_notify = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ notification <-32> # @@@ how many actually ?
-+ }
-+}
-+
-+
-+def ie_oam_td = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ext <1@8,more> = 1
-+ shaping "atm_shi" <2@6,more> = ATM_SHI_NONE
-+ compliance "atm_oci" <1@5,more> = ATM_OCI_OPT
-+ fault "atm_unfm" <3@1> = ATM_UNFM_NONE
-+ _ext <1@8,more> = 1
-+ fwd_ofi "atm_ofi" <3@5,more> = ATM_OFI_0_0
-+ bwd_ofi "atm_ofi" <3@1> = ATM_OFI_0_0
-+ }
-+}
-+
-+
-+def ie_git = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ _dummy <1@8> = 0 # bit is "spare", although not indicated in spec
-+ id_std_app "atm_irs" <7@1> = case {
-+ ATM_IRS_DSMCC,ATM_IRS_H245 {
-+ _type "atm_it" <8> = ATM_IT_SESSION
-+ _length <8> = length {
-+ session_id <-160>
-+ }
-+ _type "atm_it" <8> = ATM_IT_RESOURCE
-+ _length <8> = length {
-+ resource_id <-32>
-+ }
-+ }
-+ default 0 {
-+ unrecognized_git_identifiers <-224> # 33-5 bytes
-+ }
-+ }
-+ }
-+}
-+
-+
-+def ie_lij_id = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ _ext <1@8,more> = 1
-+ lij_id_type "atm_lit" <7@1> = ATM_LIT_ROOT
-+ lij_id <32>
-+ }
-+}
-+
-+
-+def ie_lij_prm = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ _ext <1@8,more> = 1
-+ lij_scr_ind "atm_lsi" <2@1>
-+ }
-+}
-+
-+
-+def ie_leaf_sn = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ leaf_sn <32>
-+ }
-+}
-+
-+
-+def ie_scope_sel = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ _ext <1@8,more> = 1
-+ scope_type "atm_tcs" <4@1> = ATM_TCS_ORGANIZATIONAL
-+ scope_sel "atm_css" <8>
-+ }
-+}
-+
-+
-+def ie_alt_td = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _id "atm_td" <8> = multi {
-+ ATM_TD_FW_PCR_0 { altfw_pcr_0 <24> } ATM_TD_BW_PCR_0 { altbw_pcr_0 <24> } ATM_TD_FW_PCR_01 { altfw_pcr_01 <24> } ATM_TD_BW_PCR_01 { altbw_pcr_01 <24> } ATM_TD_FW_SCR_0 { altfw_scr_0 <24> } ATM_TD_BW_SCR_0 { altbw_scr_0 <24> } ATM_TD_FW_SCR_01 { altfw_scr_01 <24> } ATM_TD_BW_SCR_01 { altbw_scr_01 <24> } ATM_TD_FW_MBS_0 { altfw_mbs_0 <24> } ATM_TD_BW_MBS_0 { altbw_mbs_0 <24> } ATM_TD_FW_MBS_01 { altfw_mbs_01 <24> } ATM_TD_BW_MBS_01 { altbw_mbs_01 <24> } ATM_TD_BEST_EFFORT { altbest_effort <0> }
-+ }
-+ }
-+}
-+
-+
-+def ie_min_td = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ _id "atm_td" <8> = multi {
-+ ATM_TD_FW_PCR_0 { minfw_pcr_0 <24> } ATM_TD_BW_PCR_0 { minbw_pcr_0 <24> } ATM_TD_FW_PCR_01 { minfw_pcr_01 <24> } ATM_TD_BW_PCR_01 { minbw_pcr_01 <24> }
-+ ATM_TD_FW_MCR_01 { minfw_mcr_01 <24> } ATM_TD_BW_MCR_01 { minbw_mcr_01 <24> }
-+ }
-+ }
-+}
-+
-+
-+def ie_eqos = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ eqos_origin "atm_eqo" <8>
-+ _id "atm_eqp" <8> = multi {
-+ ATM_EQP_ACC_FW_CDV {
-+ acc_fw_cdv <24>
-+ }
-+ ATM_EQP_ACC_BW_CDV {
-+ acc_bw_cdv <24>
-+ }
-+ ATM_EQP_CUM_FW_CDV {
-+ cum_fw_cdv <24>
-+ }
-+ ATM_EQP_CUM_BW_CDV {
-+ cum_bw_cdv <24>
-+ }
-+ ATM_EQP_ACC_FW_CLR {
-+ acc_fw_clr <8>
-+ }
-+ ATM_EQP_ACC_BW_CLR {
-+ acc_bw_clr <8>
-+ }
-+ }
-+ }
-+}
-+
-+
-+def ie_abr_add_prm = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _id "atm_aap" <8> = multi {
-+ ATM_AAP_FW_REC {
-+ abr_fw_add_rec <32>
-+ }
-+ ATM_AAP_BW_REC {
-+ abr_bw_add_rec <32>
-+ }
-+ }
-+ }
-+}
-+
-+
-+def ie_abr_set_prm = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
-+ _id "atm_asp" <8> = multi {
-+ ATM_ASP_FW_ICR {
-+ abr_fw_icr <24>
-+ }
-+ ATM_ASP_BW_ICR {
-+ abr_bw_icr <24>
-+ }
-+ ATM_ASP_FW_TBE {
-+ abr_fw_tbe <24>
-+ }
-+ ATM_ASP_BW_TBE {
-+ abr_bw_tbe <24>
-+ }
-+ ATM_ASP_CRF_RTT {
-+ atm_crf_rtt <24>
-+ }
-+ ATM_ASP_FW_RIF {
-+ atm_fw_rif <8>
-+ }
-+ ATM_ASP_BW_RIF {
-+ atm_bw_rif <8>
-+ }
-+ ATM_ASP_FW_RDF {
-+ atm_fw_rdf <8>
-+ }
-+ ATM_ASP_BW_RDF {
-+ atm_bw_rdf <8>
-+ }
-+ }
-+ }
-+}
-+
-+
-+
-+
-+def ie_ep_ref = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ _ep_type <8> = 0
-+ ep_ref <16>
-+ }
-+}
-+
-+
-+def ie_ep_state = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ ep_state <6@1>
-+ }
-+}
-+
-+
-+
-+
-+def ie_bbrt = {
-+ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
-+ type_of_report "atm_tor" <8>
-+ }
-+}
-+
-+
-+
-+
-+{
-+ _pdsc "q2931_proto" <8> = Q2931_PROTO_DSC
-+ _cr_len <8> = 3
-+ call_ref <24>
-+ msg_type "atm_msg" <8>
-+ _ext <1@8,more> = 1
-+ _flag "atm_flag" <1@5,more> = ATM_FLAG_NO
-+ _action_ind "atm_ai_msg" <2@1> = 0
-+ msg_len <16> = length {
-+ _ie_id "atm_ie" <8> = multi {
-+ aal: ATM_IE_AAL ie_aal
-+ td: ATM_IE_TD ie_td
-+ bbcap: ATM_IE_BBCAP ie_bbcap
-+ bhli: ATM_IE_BHLI ie_bhli
-+ blli1: ATM_IE_BLLI ie_blli
-+ blli2: ATM_IE_BLLI ie_blli
-+ blli3: ATM_IE_BLLI ie_blli
-+ call_state: ATM_IE_CALL_STATE ie_call_state
-+ cdpn: ATM_IE_CDPN ie_cdpn
-+ cdps: ATM_IE_CDPS ie_cdps
-+ cgpn: ATM_IE_CGPN ie_cgpn
-+ cgps: ATM_IE_CGPS ie_cgps
-+ cause: ATM_IE_CAUSE ie_cause
-+ cause2: ATM_IE_CAUSE ie_cause
-+ conn_id: ATM_IE_CONN_ID ie_conn_id
-+
-+ e2e_tdl: ATM_IE_E2E_TDL ie_e2e_tdl
-+
-+ qos: ATM_IE_QOS ie_qos
-+ bbrep: ATM_IE_BBREP ie_bbrep
-+ restart: ATM_IE_RESTART ie_restart
-+ bbs_comp: ATM_IE_BBS_COMP ie_bbs_comp
-+ tns: ATM_IE_TNS ie_tns
-+
-+ notify: ATM_IE_NOTIFY ie_notify
-+ oam_td: ATM_IE_OAM_TD ie_oam_td
-+ git: ATM_IE_GIT ie_git
-+ git2: ATM_IE_GIT ie_git
-+ git3: ATM_IE_GIT ie_git
-+ lij_id: ATM_IE_LIJ_ID ie_lij_id
-+ lij_prm: ATM_IE_LIJ_PRM ie_lij_prm
-+ leaf_sn: ATM_IE_LEAF_SN ie_leaf_sn
-+ scope_sel: ATM_IE_SCOPE_SEL ie_scope_sel
-+ alt_td: ATM_IE_ALT_TD ie_alt_td
-+ min_td: ATM_IE_MIN_TD ie_min_td
-+ eqos: ATM_IE_EQOS ie_eqos
-+ abr_add_prm:ATM_IE_ABR_ADD_PRM ie_abr_add_prm
-+ abr_set_prm:ATM_IE_ABR_SET_PRM ie_abr_set_prm
-+
-+ ep_ref: ATM_IE_EPR ie_ep_ref
-+ ep_state: ATM_IE_EP_STATE ie_ep_state
-+
-+ bbrt: ATM_IE_BBRT ie_bbrt
-+
-+ default 0 {
-+ _ext <1@8,more> = 1 __cs "q2931_cs" <2@6,more> = 0 _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length
-+ abort RECOV_ASE_UNKNOWN_IE
-+ }
-+ }
-+ }
-+}
---- linux-atm-2.4.1.orig/src/saal/Makefile.in
-+++ linux-atm-2.4.1/src/saal/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -87,8 +87,7 @@
-
- noinst_LIBRARIES = libsaal.a
-
--libsaal_a_SOURCES = pdu.h queue.h saal.h sscf.h sscop.h pdu.c queue.c saal.c \
-- sscf.c sscop.c
-+libsaal_a_SOURCES = pdu.h queue.h saal.h sscf.h sscop.h pdu.c queue.c saal.c sscf.c sscop.c
-
- mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
- CONFIG_HEADER = ../../config.h
-@@ -114,8 +113,10 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/pdu.P .deps/queue.P .deps/saal.P .deps/sscf.P \
-+.deps/sscop.P
- SOURCES = $(libsaal_a_SOURCES)
- OBJECTS = $(libsaal_a_OBJECTS)
-
-@@ -123,9 +124,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/saal/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/saal/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -139,9 +140,6 @@
-
- maintainer-clean-noinstLIBRARIES:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -164,9 +162,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -206,7 +201,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -222,6 +217,11 @@
- subdir = src/saal
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/saal/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -232,20 +232,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--pdu.o: pdu.c ../../config.h ../../src/include/stdint.h pdu.h \
-- ../../src/include/atmd.h ../../src/include/atm.h
--queue.o: queue.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h queue.h
--saal.o: saal.c ../../config.h sscop.h ../../src/include/stdint.h \
-- ../../src/include/atmd.h ../../src/include/atm.h queue.h saal.h \
-- sscf.h
--sscf.o: sscf.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h sscop.h \
-- queue.h sscf.h
--sscop.o: sscop.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atmd.h ../../src/include/atm.h sscop.h \
-- queue.h pdu.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -282,27 +300,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-noinstLIBRARIES distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -313,12 +331,14 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/sigd/Makefile.in
-+++ linux-atm-2.4.1/src/sigd/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -88,14 +88,9 @@
- INCLUDES = -I$(top_builddir)/src/qgen -I$(top_builddir)/src/saal -I.
-
- sbin_PROGRAMS = atmsigd
--atmsigd_SOURCES = atmsigd.c io.c io.h kernel.c proto.c proto.h uni.c \
-- sap.c sap.h timeout.c timeout.h trace.c trace.h \
-- policy.c policy.h cfg_y.y cfg_l.l
--
--atmsigd_XTRAS = mess.o $(top_builddir)/src/qgen/q.out.o \
-- $(top_builddir)/src/qgen/qd.dump.o \
-- $(top_builddir)/src/lib/libatm.la \
-- $(top_builddir)/src/saal/libsaal.a
-+atmsigd_SOURCES = atmsigd.c io.c io.h kernel.c proto.c proto.h uni.c sap.c sap.h timeout.c timeout.h trace.c trace.h policy.c policy.h cfg_y.y cfg_l.l
-+
-+atmsigd_XTRAS = mess.o $(top_builddir)/src/qgen/q.out.o $(top_builddir)/src/qgen/qd.dump.o $(top_builddir)/src/lib/libatm.la $(top_builddir)/src/saal/libsaal.a
-
- atmsigd_LDADD = $(atmsigd_XTRAS) -lfl
- atmsigd_DEPENDENCIES = mess.c $(atmsigd_XTRAS)
-@@ -140,8 +135,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/atmsigd.P .deps/cfg_l.P .deps/cfg_y.P .deps/io.P \
-+.deps/kernel.P .deps/policy.P .deps/proto.P .deps/sap.P .deps/timeout.P \
-+.deps/trace.P .deps/uni.P
- SOURCES = $(atmsigd_SOURCES)
- OBJECTS = $(atmsigd_OBJECTS)
-
-@@ -149,9 +147,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .l .lo .o .obj .s .y
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/sigd/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/sigd/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -181,9 +179,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -206,9 +201,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -347,7 +339,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -363,6 +355,11 @@
- subdir = src/sigd
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/sigd/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -373,69 +370,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--atmsigd.o: atmsigd.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/qgen/qlib.h io.h proto.h ../../src/include/atmsap.h \
-- ../../src/saal/saal.h ../../src/saal/sscf.h \
-- ../../src/saal/sscop.h ../../src/saal/queue.h trace.h
--cfg_l.o: cfg_l.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h cfg_y.h
--cfg_y.o: cfg_y.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h proto.h \
-- ../../src/include/atmsap.h ../../src/saal/saal.h \
-- ../../src/saal/sscf.h ../../src/saal/sscop.h \
-- ../../src/saal/queue.h io.h trace.h policy.h
--io.o: io.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/qgen/uni.h ../../src/saal/pdu.h proto.h \
-- ../../src/include/atmsap.h ../../src/saal/saal.h \
-- ../../src/saal/sscf.h ../../src/saal/sscop.h \
-- ../../src/saal/queue.h io.h trace.h
--kernel.o: kernel.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
-- ../../src/qgen/q.out.h proto.h ../../src/include/atmsap.h \
-- ../../src/saal/saal.h ../../src/saal/sscf.h \
-- ../../src/saal/sscop.h ../../src/saal/queue.h sap.h io.h \
-- policy.h timeout.h
--mess.o: mess.c ../../config.h
--policy.o: policy.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h proto.h \
-- ../../src/include/atmsap.h ../../src/saal/saal.h \
-- ../../src/saal/sscf.h ../../src/saal/sscop.h \
-- ../../src/saal/queue.h policy.h
--proto.o: proto.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h \
-- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
-- ../../src/qgen/q.out.h io.h proto.h ../../src/include/atmsap.h \
-- ../../src/saal/saal.h ../../src/saal/sscf.h \
-- ../../src/saal/sscop.h ../../src/saal/queue.h sap.h
--sap.o: sap.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
-- ../../src/qgen/q.out.h ../../src/qgen/common.h proto.h \
-- ../../src/include/atmsap.h ../../src/saal/saal.h \
-- ../../src/saal/sscf.h ../../src/saal/sscop.h \
-- ../../src/saal/queue.h sap.h
--timeout.o: timeout.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/qgen/uni.h proto.h ../../src/include/atmsap.h \
-- ../../src/saal/saal.h ../../src/saal/sscf.h \
-- ../../src/saal/sscop.h ../../src/saal/queue.h timeout.h
--trace.o: trace.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/include/atmsap.h trace.h proto.h \
-- ../../src/saal/saal.h ../../src/saal/sscf.h \
-- ../../src/saal/sscop.h ../../src/saal/queue.h \
-- ../../src/qgen/qlib.h
--uni.o: uni.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h \
-- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
-- ../../src/qgen/q.out.h proto.h ../../src/include/atmsap.h \
-- ../../src/saal/saal.h ../../src/saal/sscf.h \
-- ../../src/saal/sscop.h ../../src/saal/queue.h sap.h io.h \
-- policy.h timeout.h trace.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -474,29 +440,29 @@
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
- maintainer-clean-generic:
-- -test -z "cfg_llcfg_yhcfg_yc" || rm -f cfg_ll cfg_yh cfg_yc
-+ -test -z "cfg_lccfg_yhcfg_yc" || rm -f cfg_lc cfg_yh cfg_yc
- mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-sbinPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -509,12 +475,14 @@
- distclean-libtool clean-libtool maintainer-clean-libtool install-man4 \
- uninstall-man4 install-man8 uninstall-man8 install-man uninstall-man \
- uninstall-sysconfDATA install-sysconfDATA tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- mess.c: $(top_builddir)/src/qgen/uni.h mkmess.pl
---- linux-atm-2.4.1.orig/src/sigd/cfg_y.c
-+++ linux-atm-2.4.1/src/sigd/cfg_y.c
-@@ -1,46 +1,137 @@
-+/* A Bison parser, made by GNU Bison 1.875d. */
-
--/* A Bison parser, made from cfg_y.y
-- by GNU Bison version 1.28 */
-+/* Skeleton parser for Yacc-like parsing with Bison,
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-
--#define YYBISON 1 /* Identify Bison output. */
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
--#define TOK_LEVEL 257
--#define TOK_DEBUG 258
--#define TOK_INFO 259
--#define TOK_WARN 260
--#define TOK_ERROR 261
--#define TOK_FATAL 262
--#define TOK_SIG 263
--#define TOK_UNI30 264
--#define TOK_UNI31 265
--#define TOK_UNI40 266
--#define TOK_Q2963_1 267
--#define TOK_SAAL 268
--#define TOK_VC 269
--#define TOK_IO 270
--#define TOK_MODE 271
--#define TOK_USER 272
--#define TOK_NET 273
--#define TOK_SWITCH 274
--#define TOK_VPCI 275
--#define TOK_ITF 276
--#define TOK_PCR 277
--#define TOK_TRACE 278
--#define TOK_POLICY 279
--#define TOK_ALLOW 280
--#define TOK_REJECT 281
--#define TOK_ENTITY 282
--#define TOK_DEFAULT 283
--#define TOK_NUMBER 284
--#define TOK_MAX_RATE 285
--#define TOK_DUMP_DIR 286
--#define TOK_LOGFILE 287
--#define TOK_QOS 288
--#define TOK_FROM 289
--#define TOK_TO 290
--#define TOK_ROUTE 291
--#define TOK_PVC 292
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* Written by Richard Stallman by simplifying the original so called
-+ ``semantic'' parser. */
-+
-+/* All symbols defined below should begin with yy or YY, to avoid
-+ infringing on user name space. This should be done even for local
-+ variables, as they might otherwise be expanded by user macros.
-+ There are some unavoidable exceptions within include files to
-+ define necessary library symbols; they are noted "INFRINGES ON
-+ USER NAME SPACE" below. */
-+
-+/* Identify Bison output. */
-+#define YYBISON 1
-+
-+/* Skeleton name. */
-+#define YYSKELETON_NAME "yacc.c"
-+
-+/* Pure parsers. */
-+#define YYPURE 0
-+
-+/* Using locations. */
-+#define YYLSP_NEEDED 0
-+
-+
-+
-+/* Tokens. */
-+#ifndef YYTOKENTYPE
-+# define YYTOKENTYPE
-+ /* Put the tokens into the symbol table, so that GDB and other debuggers
-+ know about them. */
-+ enum yytokentype {
-+ TOK_LEVEL = 258,
-+ TOK_DEBUG = 259,
-+ TOK_INFO = 260,
-+ TOK_WARN = 261,
-+ TOK_ERROR = 262,
-+ TOK_FATAL = 263,
-+ TOK_SIG = 264,
-+ TOK_UNI30 = 265,
-+ TOK_UNI31 = 266,
-+ TOK_UNI40 = 267,
-+ TOK_Q2963_1 = 268,
-+ TOK_SAAL = 269,
-+ TOK_VC = 270,
-+ TOK_IO = 271,
-+ TOK_MODE = 272,
-+ TOK_USER = 273,
-+ TOK_NET = 274,
-+ TOK_SWITCH = 275,
-+ TOK_VPCI = 276,
-+ TOK_ITF = 277,
-+ TOK_PCR = 278,
-+ TOK_TRACE = 279,
-+ TOK_POLICY = 280,
-+ TOK_ALLOW = 281,
-+ TOK_REJECT = 282,
-+ TOK_ENTITY = 283,
-+ TOK_DEFAULT = 284,
-+ TOK_NUMBER = 285,
-+ TOK_MAX_RATE = 286,
-+ TOK_DUMP_DIR = 287,
-+ TOK_LOGFILE = 288,
-+ TOK_QOS = 289,
-+ TOK_FROM = 290,
-+ TOK_TO = 291,
-+ TOK_ROUTE = 292,
-+ TOK_PVC = 293
-+ };
-+#endif
-+#define TOK_LEVEL 258
-+#define TOK_DEBUG 259
-+#define TOK_INFO 260
-+#define TOK_WARN 261
-+#define TOK_ERROR 262
-+#define TOK_FATAL 263
-+#define TOK_SIG 264
-+#define TOK_UNI30 265
-+#define TOK_UNI31 266
-+#define TOK_UNI40 267
-+#define TOK_Q2963_1 268
-+#define TOK_SAAL 269
-+#define TOK_VC 270
-+#define TOK_IO 271
-+#define TOK_MODE 272
-+#define TOK_USER 273
-+#define TOK_NET 274
-+#define TOK_SWITCH 275
-+#define TOK_VPCI 276
-+#define TOK_ITF 277
-+#define TOK_PCR 278
-+#define TOK_TRACE 279
-+#define TOK_POLICY 280
-+#define TOK_ALLOW 281
-+#define TOK_REJECT 282
-+#define TOK_ENTITY 283
-+#define TOK_DEFAULT 284
-+#define TOK_NUMBER 285
-+#define TOK_MAX_RATE 286
-+#define TOK_DUMP_DIR 287
-+#define TOK_LOGFILE 288
-+#define TOK_QOS 289
-+#define TOK_FROM 290
-+#define TOK_TO 291
-+#define TOK_ROUTE 292
-+#define TOK_PVC 293
-+
-+
-+
-+
-+/* Copy the first part of user declarations. */
- #line 1 "cfg_y.y"
-
- /* cfg.y - configuration language */
-@@ -51,6 +142,7 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
- #include <string.h>
- #include <ctype.h>
- #include <limits.h>
-@@ -63,6 +155,8 @@
- #include "trace.h"
- #include "policy.h"
-
-+extern void yywarn(const char *s);
-+extern void yyerror(const char *s);
-
- static RULE *rule;
- static SIG_ENTITY *curr_sig = &_entity;
-@@ -93,516 +187,830 @@
- }
-
-
--#line 53 "cfg_y.y"
--typedef union {
-+
-+/* Enabling traces. */
-+#ifndef YYDEBUG
-+# define YYDEBUG 0
-+#endif
-+
-+/* Enabling verbose error messages. */
-+#ifdef YYERROR_VERBOSE
-+# undef YYERROR_VERBOSE
-+# define YYERROR_VERBOSE 1
-+#else
-+# define YYERROR_VERBOSE 0
-+#endif
-+
-+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
-+#line 56 "cfg_y.y"
-+typedef union YYSTYPE {
- int num;
- char *str;
- struct sockaddr_atmpvc pvc;
- } YYSTYPE;
--#include <stdio.h>
-+/* Line 191 of yacc.c. */
-+#line 213 "y.tab.c"
-+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-+# define YYSTYPE_IS_DECLARED 1
-+# define YYSTYPE_IS_TRIVIAL 1
-+#endif
-+
-+
-+
-+/* Copy the second part of user declarations. */
-+
-+
-+/* Line 214 of yacc.c. */
-+#line 225 "y.tab.c"
-+
-+#if ! defined (yyoverflow) || YYERROR_VERBOSE
-+
-+# ifndef YYFREE
-+# define YYFREE free
-+# endif
-+# ifndef YYMALLOC
-+# define YYMALLOC malloc
-+# endif
-+
-+/* The parser invokes alloca or malloc; define the necessary symbols. */
-+
-+# ifdef YYSTACK_USE_ALLOCA
-+# if YYSTACK_USE_ALLOCA
-+# define YYSTACK_ALLOC alloca
-+# endif
-+# else
-+# if defined (alloca) || defined (_ALLOCA_H)
-+# define YYSTACK_ALLOC alloca
-+# else
-+# ifdef __GNUC__
-+# define YYSTACK_ALLOC __builtin_alloca
-+# endif
-+# endif
-+# endif
-+
-+# ifdef YYSTACK_ALLOC
-+ /* Pacify GCC's `empty if-body' warning. */
-+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
-+# else
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+# define YYSTACK_ALLOC YYMALLOC
-+# define YYSTACK_FREE YYFREE
-+# endif
-+#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
-+
-+
-+#if (! defined (yyoverflow) \
-+ && (! defined (__cplusplus) \
-+ || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
-+
-+/* A type that is properly aligned for any stack member. */
-+union yyalloc
-+{
-+ short int yyss;
-+ YYSTYPE yyvs;
-+ };
-+
-+/* The size of the maximum gap between one aligned stack and the next. */
-+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-+
-+/* The size of an array large to enough to hold all stacks, each with
-+ N elements. */
-+# define YYSTACK_BYTES(N) \
-+ ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \
-+ + YYSTACK_GAP_MAXIMUM)
-+
-+/* Copy COUNT objects from FROM to TO. The source and destination do
-+ not overlap. */
-+# ifndef YYCOPY
-+# if defined (__GNUC__) && 1 < __GNUC__
-+# define YYCOPY(To, From, Count) \
-+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-+# else
-+# define YYCOPY(To, From, Count) \
-+ do \
-+ { \
-+ register YYSIZE_T yyi; \
-+ for (yyi = 0; yyi < (Count); yyi++) \
-+ (To)[yyi] = (From)[yyi]; \
-+ } \
-+ while (0)
-+# endif
-+# endif
-+
-+/* Relocate STACK from its old location to the new one. The
-+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
-+ elements in the stack, and YYPTR gives the new location of the
-+ stack. Advance YYPTR to a properly aligned location for the next
-+ stack. */
-+# define YYSTACK_RELOCATE(Stack) \
-+ do \
-+ { \
-+ YYSIZE_T yynewbytes; \
-+ YYCOPY (&yyptr->Stack, Stack, yysize); \
-+ Stack = &yyptr->Stack; \
-+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
-+ yyptr += yynewbytes / sizeof (*yyptr); \
-+ } \
-+ while (0)
-
--#ifndef __cplusplus
--#ifndef __STDC__
--#define const
--#endif
- #endif
-
-+#if defined (__STDC__) || defined (__cplusplus)
-+ typedef signed char yysigned_char;
-+#else
-+ typedef short int yysigned_char;
-+#endif
-
--
--#define YYFINAL 117
--#define YYFLAG -32768
--#define YYNTBASE 41
--
--#define YYTRANSLATE(x) ((unsigned)(x) <= 292 ? yytranslate[x] : 71)
--
--static const char yytranslate[] = { 0,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 39, 2, 40, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
-- 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
-- 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
-- 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
-- 37, 38
-+/* YYFINAL -- State number of the termination state. */
-+#define YYFINAL 53
-+/* YYLAST -- Last index in YYTABLE. */
-+#define YYLAST 108
-+
-+/* YYNTOKENS -- Number of terminals. */
-+#define YYNTOKENS 41
-+/* YYNNTS -- Number of nonterminals. */
-+#define YYNNTS 31
-+/* YYNRULES -- Number of rules. */
-+#define YYNRULES 79
-+/* YYNRULES -- Number of states. */
-+#define YYNSTATES 117
-+
-+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-+#define YYUNDEFTOK 2
-+#define YYMAXUTOK 293
-+
-+#define YYTRANSLATE(YYX) \
-+ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-+
-+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-+static const unsigned char yytranslate[] =
-+{
-+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 39, 2, 40, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
-+ 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
-+ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
-+ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
-+ 35, 36, 37, 38
- };
-
--#if YYDEBUG != 0
--static const short yyprhs[] = { 0,
-- 0, 3, 4, 7, 8, 11, 14, 17, 20, 23,
-- 26, 29, 30, 35, 36, 40, 41, 44, 49, 52,
-- 54, 56, 58, 60, 62, 66, 67, 70, 72, 76,
-- 77, 80, 82, 86, 87, 90, 92, 96, 97, 100,
-- 102, 106, 107, 110, 113, 118, 120, 122, 124, 126,
-- 128, 131, 134, 137, 140, 143, 145, 147, 150, 152,
-- 154, 157, 158, 160, 162, 164, 166, 168, 170, 172,
-- 174, 176, 179, 180, 184, 186, 188, 190
-+#if YYDEBUG
-+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
-+ YYRHS. */
-+static const unsigned char yyprhs[] =
-+{
-+ 0, 0, 3, 6, 7, 10, 11, 14, 17, 20,
-+ 23, 26, 29, 32, 33, 38, 39, 43, 44, 47,
-+ 52, 55, 57, 59, 61, 63, 65, 69, 70, 73,
-+ 75, 79, 80, 83, 85, 89, 90, 93, 95, 99,
-+ 100, 103, 105, 109, 110, 113, 116, 121, 123, 125,
-+ 127, 129, 131, 134, 137, 140, 143, 146, 148, 150,
-+ 153, 155, 157, 160, 161, 163, 165, 167, 169, 171,
-+ 173, 175, 177, 179, 182, 183, 187, 189, 191, 193
- };
-
--static const short yyrhs[] = { 42,
-- 43, 0, 0, 44, 42, 0, 0, 45, 43, 0,
-- 3, 65, 0, 9, 50, 0, 14, 52, 0, 16,
-- 54, 0, 4, 56, 0, 25, 58, 0, 0, 28,
-- 38, 46, 47, 0, 0, 39, 48, 40, 0, 0,
-- 49, 48, 0, 21, 30, 22, 30, 0, 17, 66,
-- 0, 34, 0, 31, 0, 37, 0, 29, 0, 60,
-- 0, 39, 51, 40, 0, 0, 60, 51, 0, 61,
-- 0, 39, 53, 40, 0, 0, 61, 53, 0, 62,
-- 0, 39, 55, 40, 0, 0, 62, 55, 0, 63,
-- 0, 39, 57, 40, 0, 0, 63, 57, 0, 67,
-- 0, 39, 59, 40, 0, 0, 67, 59, 0, 3,
-- 65, 0, 21, 30, 22, 30, 0, 10, 0, 11,
-- 0, 12, 0, 13, 0, 19, 0, 17, 66, 0,
-- 3, 65, 0, 3, 65, 0, 15, 38, 0, 23,
-- 30, 0, 34, 0, 31, 0, 3, 65, 0, 32,
-- 0, 33, 0, 24, 64, 0, 0, 30, 0, 4,
-- 0, 5, 0, 6, 0, 7, 0, 8, 0, 18,
-- 0, 19, 0, 20, 0, 3, 65, 0, 0, 69,
-- 68, 70, 0, 26, 0, 27, 0, 35, 0, 36,
-- 0
-+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-+static const yysigned_char yyrhs[] =
-+{
-+ 42, 0, -1, 43, 44, -1, -1, 45, 43, -1,
-+ -1, 46, 44, -1, 3, 66, -1, 9, 51, -1,
-+ 14, 53, -1, 16, 55, -1, 4, 57, -1, 25,
-+ 59, -1, -1, 28, 38, 47, 48, -1, -1, 39,
-+ 49, 40, -1, -1, 50, 49, -1, 21, 30, 22,
-+ 30, -1, 17, 67, -1, 34, -1, 31, -1, 37,
-+ -1, 29, -1, 61, -1, 39, 52, 40, -1, -1,
-+ 61, 52, -1, 62, -1, 39, 54, 40, -1, -1,
-+ 62, 54, -1, 63, -1, 39, 56, 40, -1, -1,
-+ 63, 56, -1, 64, -1, 39, 58, 40, -1, -1,
-+ 64, 58, -1, 68, -1, 39, 60, 40, -1, -1,
-+ 68, 60, -1, 3, 66, -1, 21, 30, 22, 30,
-+ -1, 10, -1, 11, -1, 12, -1, 13, -1, 19,
-+ -1, 17, 67, -1, 3, 66, -1, 3, 66, -1,
-+ 15, 38, -1, 23, 30, -1, 34, -1, 31, -1,
-+ 3, 66, -1, 32, -1, 33, -1, 24, 65, -1,
-+ -1, 30, -1, 4, -1, 5, -1, 6, -1, 7,
-+ -1, 8, -1, 18, -1, 19, -1, 20, -1, 3,
-+ 66, -1, -1, 70, 69, 71, -1, 26, -1, 27,
-+ -1, 35, -1, 36, -1
- };
-
--#endif
--
--#if YYDEBUG != 0
--static const short yyrline[] = { 0,
-- 73, 77, 78, 81, 82, 105, 110, 111, 112, 113,
-- 114, 117, 138, 140, 141, 144, 145, 148, 153, 154,
-- 158, 162, 176, 182, 184, 187, 188, 191, 193, 196,
-- 197, 200, 202, 205, 206, 209, 211, 214, 215, 218,
-- 220, 223, 224, 227, 234, 238, 247, 256, 265, 274,
-- 279, 282, 290, 295, 299, 304, 308, 314, 319, 324,
-- 328, 334, 338, 344, 349, 353, 357, 361, 367, 372,
-- 376, 382, 387, 393, 395, 400, 406, 412
-+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-+static const unsigned short int yyrline[] =
-+{
-+ 0, 77, 77, 80, 81, 84, 85, 109, 113, 114,
-+ 115, 116, 117, 122, 121, 151, 152, 155, 156, 160,
-+ 164, 165, 169, 173, 187, 194, 195, 198, 199, 203,
-+ 204, 207, 208, 212, 213, 216, 217, 221, 222, 225,
-+ 226, 230, 231, 234, 235, 239, 245, 249, 258, 267,
-+ 276, 285, 290, 294, 302, 306, 310, 315, 319, 326,
-+ 330, 335, 339, 346, 349, 356, 360, 364, 368, 372,
-+ 379, 383, 387, 394, 399, 398, 407, 411, 418, 423
- };
- #endif
-
--
--#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
--
--static const char * const yytname[] = { "$","error","$undefined.","TOK_LEVEL",
--"TOK_DEBUG","TOK_INFO","TOK_WARN","TOK_ERROR","TOK_FATAL","TOK_SIG","TOK_UNI30",
--"TOK_UNI31","TOK_UNI40","TOK_Q2963_1","TOK_SAAL","TOK_VC","TOK_IO","TOK_MODE",
--"TOK_USER","TOK_NET","TOK_SWITCH","TOK_VPCI","TOK_ITF","TOK_PCR","TOK_TRACE",
--"TOK_POLICY","TOK_ALLOW","TOK_REJECT","TOK_ENTITY","TOK_DEFAULT","TOK_NUMBER",
--"TOK_MAX_RATE","TOK_DUMP_DIR","TOK_LOGFILE","TOK_QOS","TOK_FROM","TOK_TO","TOK_ROUTE",
--"TOK_PVC","'{'","'}'","all","global","local","item","entity","@1","opt_options",
--"options","option","sig","sig_items","saal","saal_items","io","io_items","debug",
--"debug_items","policy","policy_items","sig_item","saal_item","io_item","debug_item",
--"opt_trace_size","level","mode","policy_item","@2","action","direction", NULL
-+#if YYDEBUG || YYERROR_VERBOSE
-+/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
-+ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-+static const char *const yytname[] =
-+{
-+ "$end", "error", "$undefined", "TOK_LEVEL", "TOK_DEBUG", "TOK_INFO",
-+ "TOK_WARN", "TOK_ERROR", "TOK_FATAL", "TOK_SIG", "TOK_UNI30",
-+ "TOK_UNI31", "TOK_UNI40", "TOK_Q2963_1", "TOK_SAAL", "TOK_VC", "TOK_IO",
-+ "TOK_MODE", "TOK_USER", "TOK_NET", "TOK_SWITCH", "TOK_VPCI", "TOK_ITF",
-+ "TOK_PCR", "TOK_TRACE", "TOK_POLICY", "TOK_ALLOW", "TOK_REJECT",
-+ "TOK_ENTITY", "TOK_DEFAULT", "TOK_NUMBER", "TOK_MAX_RATE",
-+ "TOK_DUMP_DIR", "TOK_LOGFILE", "TOK_QOS", "TOK_FROM", "TOK_TO",
-+ "TOK_ROUTE", "TOK_PVC", "'{'", "'}'", "$accept", "all", "global",
-+ "local", "item", "entity", "@1", "opt_options", "options", "option",
-+ "sig", "sig_items", "saal", "saal_items", "io", "io_items", "debug",
-+ "debug_items", "policy", "policy_items", "sig_item", "saal_item",
-+ "io_item", "debug_item", "opt_trace_size", "level", "mode",
-+ "policy_item", "@2", "action", "direction", 0
- };
- #endif
-
--static const short yyr1[] = { 0,
-- 41, 42, 42, 43, 43, 44, 44, 44, 44, 44,
-- 44, 46, 45, 47, 47, 48, 48, 49, 49, 49,
-- 49, 49, 49, 50, 50, 51, 51, 52, 52, 53,
-- 53, 54, 54, 55, 55, 56, 56, 57, 57, 58,
-- 58, 59, 59, 60, 60, 60, 60, 60, 60, 60,
-- 60, 61, 62, 62, 62, 62, 62, 63, 63, 63,
-- 63, 64, 64, 65, 65, 65, 65, 65, 66, 66,
-- 66, 67, 68, 67, 69, 69, 70, 70
-+# ifdef YYPRINT
-+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
-+ token YYLEX-NUM. */
-+static const unsigned short int yytoknum[] =
-+{
-+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
-+ 265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
-+ 275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
-+ 285, 286, 287, 288, 289, 290, 291, 292, 293, 123,
-+ 125
- };
-+# endif
-
--static const short yyr2[] = { 0,
-- 2, 0, 2, 0, 2, 2, 2, 2, 2, 2,
-- 2, 0, 4, 0, 3, 0, 2, 4, 2, 1,
-- 1, 1, 1, 1, 3, 0, 2, 1, 3, 0,
-- 2, 1, 3, 0, 2, 1, 3, 0, 2, 1,
-- 3, 0, 2, 2, 4, 1, 1, 1, 1, 1,
-- 2, 2, 2, 2, 2, 1, 1, 2, 1, 1,
-- 2, 0, 1, 1, 1, 1, 1, 1, 1, 1,
-- 1, 2, 0, 3, 1, 1, 1, 1
-+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-+static const unsigned char yyr1[] =
-+{
-+ 0, 41, 42, 43, 43, 44, 44, 45, 45, 45,
-+ 45, 45, 45, 47, 46, 48, 48, 49, 49, 50,
-+ 50, 50, 50, 50, 50, 51, 51, 52, 52, 53,
-+ 53, 54, 54, 55, 55, 56, 56, 57, 57, 58,
-+ 58, 59, 59, 60, 60, 61, 61, 61, 61, 61,
-+ 61, 61, 61, 62, 63, 63, 63, 63, 63, 64,
-+ 64, 64, 64, 65, 65, 66, 66, 66, 66, 66,
-+ 67, 67, 67, 68, 69, 68, 70, 70, 71, 71
- };
-
--static const short yydefact[] = { 2,
-- 0, 0, 0, 0, 0, 0, 4, 2, 64, 65,
-- 66, 67, 68, 6, 0, 62, 59, 60, 38, 10,
-- 36, 0, 46, 47, 48, 49, 0, 50, 0, 26,
-- 7, 24, 0, 30, 8, 28, 0, 0, 0, 57,
-- 56, 34, 9, 32, 0, 75, 76, 42, 11, 40,
-- 73, 0, 1, 4, 3, 58, 63, 61, 0, 38,
-- 44, 69, 70, 71, 51, 0, 0, 26, 52, 0,
-- 30, 53, 54, 55, 0, 34, 72, 0, 42, 0,
-- 12, 5, 37, 39, 0, 25, 27, 29, 31, 33,
-- 35, 41, 43, 77, 78, 74, 14, 45, 16, 13,
-- 0, 0, 23, 21, 20, 22, 0, 16, 19, 0,
-- 15, 17, 0, 18, 0, 0, 0
-+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-+static const unsigned char yyr2[] =
-+{
-+ 0, 2, 2, 0, 2, 0, 2, 2, 2, 2,
-+ 2, 2, 2, 0, 4, 0, 3, 0, 2, 4,
-+ 2, 1, 1, 1, 1, 1, 3, 0, 2, 1,
-+ 3, 0, 2, 1, 3, 0, 2, 1, 3, 0,
-+ 2, 1, 3, 0, 2, 2, 4, 1, 1, 1,
-+ 1, 1, 2, 2, 2, 2, 2, 1, 1, 2,
-+ 1, 1, 2, 0, 1, 1, 1, 1, 1, 1,
-+ 1, 1, 1, 2, 0, 3, 1, 1, 1, 1
- };
-
--static const short yydefgoto[] = { 115,
-- 7, 53, 8, 54, 97, 100, 107, 108, 31, 67,
-- 35, 70, 43, 75, 20, 59, 49, 78, 68, 71,
-- 76, 60, 58, 14, 65, 79, 80, 51, 96
-+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
-+ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
-+ means the default is an error. */
-+static const unsigned char yydefact[] =
-+{
-+ 3, 0, 0, 0, 0, 0, 0, 0, 5, 3,
-+ 65, 66, 67, 68, 69, 7, 0, 63, 60, 61,
-+ 39, 11, 37, 0, 47, 48, 49, 50, 0, 51,
-+ 0, 27, 8, 25, 0, 31, 9, 29, 0, 0,
-+ 0, 58, 57, 35, 10, 33, 0, 76, 77, 43,
-+ 12, 41, 74, 1, 0, 2, 5, 4, 59, 64,
-+ 62, 0, 39, 45, 70, 71, 72, 52, 0, 0,
-+ 27, 53, 0, 31, 54, 55, 56, 0, 35, 73,
-+ 0, 43, 0, 13, 6, 38, 40, 0, 26, 28,
-+ 30, 32, 34, 36, 42, 44, 78, 79, 75, 15,
-+ 46, 17, 14, 0, 0, 24, 22, 21, 23, 0,
-+ 17, 20, 0, 16, 18, 0, 19
- };
-
--static const short yypact[] = { 52,
-- 100, 1, -3, -1, -2, 0, -17, 52,-32768,-32768,
---32768,-32768,-32768,-32768, 100, -18,-32768,-32768, 25,-32768,
---32768, 100,-32768,-32768,-32768,-32768, 60,-32768, -15, 82,
---32768,-32768, 100, 14,-32768,-32768, 100, -19, -10,-32768,
---32768, 20,-32768,-32768, 100,-32768,-32768, 19,-32768,-32768,
---32768, -14,-32768, -17,-32768,-32768,-32768,-32768, -9, 25,
---32768,-32768,-32768,-32768,-32768, 8, 2, 82,-32768, 4,
-- 14,-32768,-32768,-32768, 7, 20,-32768, 10, 19, -30,
---32768,-32768,-32768,-32768, 22,-32768,-32768,-32768,-32768,-32768,
---32768,-32768,-32768,-32768,-32768,-32768, 21,-32768, 53,-32768,
-- 60, 23,-32768,-32768,-32768,-32768, 24, 53,-32768, 40,
---32768,-32768, 35,-32768, 67, 69,-32768
-+/* YYDEFGOTO[NTERM-NUM]. */
-+static const yysigned_char yydefgoto[] =
-+{
-+ -1, 7, 8, 55, 9, 56, 99, 102, 109, 110,
-+ 32, 69, 36, 72, 44, 77, 21, 61, 50, 80,
-+ 70, 73, 78, 62, 60, 15, 67, 81, 82, 52,
-+ 98
- };
-
--static const short yypgoto[] = {-32768,
-- 64, 27,-32768,-32768,-32768,-32768, -35,-32768,-32768, 15,
---32768, 5,-32768, 12,-32768, 29,-32768, -4, 83, 87,
-- 91, 95,-32768, 26, 9, 92,-32768,-32768,-32768
-+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
-+ STATE-NUM. */
-+#define YYPACT_NINF -31
-+static const yysigned_char yypact[] =
-+{
-+ 53, 69, 1, -3, -1, -2, 0, 11, -16, 53,
-+ -31, -31, -31, -31, -31, -31, 69, -15, -31, -31,
-+ 28, -31, -31, 69, -31, -31, -31, -31, 46, -31,
-+ -13, 80, -31, -31, 69, 16, -31, -31, 69, -18,
-+ -6, -31, -31, 20, -31, -31, 69, -31, -31, 19,
-+ -31, -31, -31, -31, -10, -31, -16, -31, -31, -31,
-+ -31, 2, 28, -31, -31, -31, -31, -31, 8, 4,
-+ 80, -31, 7, 16, -31, -31, -31, 9, 20, -31,
-+ 10, 19, -30, -31, -31, -31, -31, 23, -31, -31,
-+ -31, -31, -31, -31, -31, -31, -31, -31, -31, 31,
-+ -31, 51, -31, 46, 49, -31, -31, -31, -31, 15,
-+ 51, -31, 36, -31, -31, 54, -31
- };
-
--
--#define YYLAST 110
--
--
--static const short yytable[] = { 22,
-- 37, 33, 45, 15, 94, 95, 23, 24, 25, 26,
-- 52, 57, 38, 27, 66, 28, 33, 29, 73, 74,
-- 39, 45, 37, 81, 16, 46, 47, 15, 40, 85,
-- 83, 41, 17, 18, 38, 30, 42, 34, 48, 19,
-- 56, 86, 39, 88, 46, 47, 90, 61, 16, 92,
-- 40, 98, 110, 41, 1, 2, 17, 18, 69, 99,
-- 3, 113, 72, 111, 114, 4, 116, 5, 117, 101,
-- 77, 55, 112, 102, 93, 89, 6, 62, 63, 64,
-- 82, 103, 87, 104, 22, 32, 105, 91, 84, 106,
-- 36, 23, 24, 25, 26, 44, 21, 50, 27, 0,
-- 28, 0, 29, 9, 10, 11, 12, 13, 0, 109
-+/* YYPGOTO[NTERM-NUM]. */
-+static const yysigned_char yypgoto[] =
-+{
-+ -31, -31, 72, 30, -31, -31, -31, -31, -23, -31,
-+ -31, 24, -31, 22, -31, 18, -31, 27, -31, 17,
-+ 97, 98, 99, 101, -31, 25, 3, 102, -31, -31,
-+ -31
- };
-
--static const short yycheck[] = { 3,
-- 3, 3, 3, 3, 35, 36, 10, 11, 12, 13,
-- 28, 30, 15, 17, 30, 19, 3, 21, 38, 30,
-- 23, 3, 3, 38, 24, 26, 27, 3, 31, 22,
-- 40, 34, 32, 33, 15, 39, 39, 39, 39, 39,
-- 15, 40, 23, 40, 26, 27, 40, 22, 24, 40,
-- 31, 30, 30, 34, 3, 4, 32, 33, 33, 39,
-- 9, 22, 37, 40, 30, 14, 0, 16, 0, 17,
-- 45, 8, 108, 21, 79, 71, 25, 18, 19, 20,
-- 54, 29, 68, 31, 3, 3, 34, 76, 60, 37,
-- 4, 10, 11, 12, 13, 5, 2, 6, 17, -1,
-- 19, -1, 21, 4, 5, 6, 7, 8, -1, 101
-+/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
-+ positive, shift that token. If negative, reduce the rule which
-+ number is the opposite. If zero, do what YYDEFACT says.
-+ If YYTABLE_NINF, syntax error. */
-+#define YYTABLE_NINF -1
-+static const unsigned char yytable[] =
-+{
-+ 23, 38, 34, 46, 16, 96, 97, 24, 25, 26,
-+ 27, 53, 54, 39, 28, 59, 29, 68, 30, 34,
-+ 75, 40, 46, 38, 76, 17, 47, 48, 83, 41,
-+ 87, 16, 42, 18, 19, 39, 31, 43, 35, 49,
-+ 20, 58, 85, 40, 88, 47, 48, 90, 63, 92,
-+ 94, 41, 17, 100, 42, 113, 1, 2, 115, 71,
-+ 18, 19, 3, 74, 64, 65, 66, 4, 103, 5,
-+ 101, 79, 104, 10, 11, 12, 13, 14, 6, 112,
-+ 105, 57, 106, 23, 116, 107, 84, 114, 108, 86,
-+ 24, 25, 26, 27, 89, 91, 93, 28, 95, 29,
-+ 33, 30, 37, 22, 45, 0, 111, 0, 51
- };
--/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
--#line 3 "/usr/lib/bison.simple"
--/* This file comes from bison-1.28. */
--
--/* Skeleton output parser for bison,
-- Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
-
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
--
--/* As a special exception, when this file is copied by Bison into a
-- Bison output file, you may use that output file without restriction.
-- This special exception was added by the Free Software Foundation
-- in version 1.24 of Bison. */
-+static const yysigned_char yycheck[] =
-+{
-+ 3, 3, 3, 3, 3, 35, 36, 10, 11, 12,
-+ 13, 0, 28, 15, 17, 30, 19, 30, 21, 3,
-+ 38, 23, 3, 3, 30, 24, 26, 27, 38, 31,
-+ 22, 3, 34, 32, 33, 15, 39, 39, 39, 39,
-+ 39, 16, 40, 23, 40, 26, 27, 40, 23, 40,
-+ 40, 31, 24, 30, 34, 40, 3, 4, 22, 34,
-+ 32, 33, 9, 38, 18, 19, 20, 14, 17, 16,
-+ 39, 46, 21, 4, 5, 6, 7, 8, 25, 30,
-+ 29, 9, 31, 3, 30, 34, 56, 110, 37, 62,
-+ 10, 11, 12, 13, 70, 73, 78, 17, 81, 19,
-+ 3, 21, 4, 2, 5, -1, 103, -1, 6
-+};
-
--/* This is the parser code that is written into each bison parser
-- when the %semantic_parser declaration is not specified in the grammar.
-- It was written by Richard Stallman by simplifying the hairy parser
-- used when %semantic_parser is specified. */
--
--#ifndef YYSTACK_USE_ALLOCA
--#ifdef alloca
--#define YYSTACK_USE_ALLOCA
--#else /* alloca not defined */
--#ifdef __GNUC__
--#define YYSTACK_USE_ALLOCA
--#define alloca __builtin_alloca
--#else /* not GNU C. */
--#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
--#define YYSTACK_USE_ALLOCA
--#include <alloca.h>
--#else /* not sparc */
--/* We think this test detects Watcom and Microsoft C. */
--/* This used to test MSDOS, but that is a bad idea
-- since that symbol is in the user namespace. */
--#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
--#if 0 /* No need for malloc.h, which pollutes the namespace;
-- instead, just don't use alloca. */
--#include <malloc.h>
--#endif
--#else /* not MSDOS, or __TURBOC__ */
--#if defined(_AIX)
--/* I don't know what this was needed for, but it pollutes the namespace.
-- So I turned it off. rms, 2 May 1997. */
--/* #include <malloc.h> */
-- #pragma alloca
--#define YYSTACK_USE_ALLOCA
--#else /* not MSDOS, or __TURBOC__, or _AIX */
--#if 0
--#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
-- and on HPUX 10. Eventually we can turn this on. */
--#define YYSTACK_USE_ALLOCA
--#define alloca __builtin_alloca
--#endif /* __hpux */
--#endif
--#endif /* not _AIX */
--#endif /* not MSDOS, or __TURBOC__ */
--#endif /* not sparc */
--#endif /* not GNU C */
--#endif /* alloca not defined */
--#endif /* YYSTACK_USE_ALLOCA not defined */
-+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
-+ symbol of state STATE-NUM. */
-+static const unsigned char yystos[] =
-+{
-+ 0, 3, 4, 9, 14, 16, 25, 42, 43, 45,
-+ 4, 5, 6, 7, 8, 66, 3, 24, 32, 33,
-+ 39, 57, 64, 3, 10, 11, 12, 13, 17, 19,
-+ 21, 39, 51, 61, 3, 39, 53, 62, 3, 15,
-+ 23, 31, 34, 39, 55, 63, 3, 26, 27, 39,
-+ 59, 68, 70, 0, 28, 44, 46, 43, 66, 30,
-+ 65, 58, 64, 66, 18, 19, 20, 67, 30, 52,
-+ 61, 66, 54, 62, 66, 38, 30, 56, 63, 66,
-+ 60, 68, 69, 38, 44, 40, 58, 22, 40, 52,
-+ 40, 54, 40, 56, 40, 60, 35, 36, 71, 47,
-+ 30, 39, 48, 17, 21, 29, 31, 34, 37, 49,
-+ 50, 67, 30, 40, 49, 22, 30
-+};
-
--#ifdef YYSTACK_USE_ALLOCA
--#define YYSTACK_ALLOC alloca
--#else
--#define YYSTACK_ALLOC malloc
-+#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
-+# define YYSIZE_T __SIZE_TYPE__
-+#endif
-+#if ! defined (YYSIZE_T) && defined (size_t)
-+# define YYSIZE_T size_t
-+#endif
-+#if ! defined (YYSIZE_T)
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+#endif
-+#if ! defined (YYSIZE_T)
-+# define YYSIZE_T unsigned int
- #endif
--
--/* Note: there must be only one dollar sign in this file.
-- It is replaced by the list of actions, each action
-- as one case of the switch. */
-
- #define yyerrok (yyerrstatus = 0)
- #define yyclearin (yychar = YYEMPTY)
--#define YYEMPTY -2
-+#define YYEMPTY (-2)
- #define YYEOF 0
-+
- #define YYACCEPT goto yyacceptlab
--#define YYABORT goto yyabortlab
--#define YYERROR goto yyerrlab1
--/* Like YYERROR except do call yyerror.
-- This remains here temporarily to ease the
-- transition to the new meaning of YYERROR, for GCC.
-+#define YYABORT goto yyabortlab
-+#define YYERROR goto yyerrorlab
-+
-+
-+/* Like YYERROR except do call yyerror. This remains here temporarily
-+ to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. */
-+
- #define YYFAIL goto yyerrlab
-+
- #define YYRECOVERING() (!!yyerrstatus)
--#define YYBACKUP(token, value) \
-+
-+#define YYBACKUP(Token, Value) \
- do \
- if (yychar == YYEMPTY && yylen == 1) \
-- { yychar = (token), yylval = (value); \
-- yychar1 = YYTRANSLATE (yychar); \
-+ { \
-+ yychar = (Token); \
-+ yylval = (Value); \
-+ yytoken = YYTRANSLATE (yychar); \
- YYPOPSTACK; \
- goto yybackup; \
- } \
- else \
-- { yyerror ("syntax error: cannot back up"); YYERROR; } \
-+ { \
-+ yyerror ("syntax error: cannot back up");\
-+ YYERROR; \
-+ } \
- while (0)
-
- #define YYTERROR 1
- #define YYERRCODE 256
-
--#ifndef YYPURE
--#define YYLEX yylex()
--#endif
-+/* YYLLOC_DEFAULT -- Compute the default location (before the actions
-+ are run). */
-
--#ifdef YYPURE
--#ifdef YYLSP_NEEDED
--#ifdef YYLEX_PARAM
--#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
--#else
--#define YYLEX yylex(&yylval, &yylloc)
-+#ifndef YYLLOC_DEFAULT
-+# define YYLLOC_DEFAULT(Current, Rhs, N) \
-+ ((Current).first_line = (Rhs)[1].first_line, \
-+ (Current).first_column = (Rhs)[1].first_column, \
-+ (Current).last_line = (Rhs)[N].last_line, \
-+ (Current).last_column = (Rhs)[N].last_column)
- #endif
--#else /* not YYLSP_NEEDED */
-+
-+/* YYLEX -- calling `yylex' with the right arguments. */
-+
- #ifdef YYLEX_PARAM
--#define YYLEX yylex(&yylval, YYLEX_PARAM)
-+# define YYLEX yylex (YYLEX_PARAM)
- #else
--#define YYLEX yylex(&yylval)
--#endif
--#endif /* not YYLSP_NEEDED */
-+# define YYLEX yylex ()
- #endif
-
--/* If nonreentrant, generate the variables here */
-+/* Enable debugging if requested. */
-+#if YYDEBUG
-
--#ifndef YYPURE
-+# ifndef YYFPRINTF
-+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYFPRINTF fprintf
-+# endif
-+
-+# define YYDPRINTF(Args) \
-+do { \
-+ if (yydebug) \
-+ YYFPRINTF Args; \
-+} while (0)
-+
-+# define YYDSYMPRINT(Args) \
-+do { \
-+ if (yydebug) \
-+ yysymprint Args; \
-+} while (0)
-+
-+# define YYDSYMPRINTF(Title, Token, Value, Location) \
-+do { \
-+ if (yydebug) \
-+ { \
-+ YYFPRINTF (stderr, "%s ", Title); \
-+ yysymprint (stderr, \
-+ Token, Value); \
-+ YYFPRINTF (stderr, "\n"); \
-+ } \
-+} while (0)
-
--int yychar; /* the lookahead symbol */
--YYSTYPE yylval; /* the semantic value of the */
-- /* lookahead symbol */
-+/*------------------------------------------------------------------.
-+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-+| TOP (included). |
-+`------------------------------------------------------------------*/
-
--#ifdef YYLSP_NEEDED
--YYLTYPE yylloc; /* location data for the lookahead */
-- /* symbol */
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yy_stack_print (short int *bottom, short int *top)
-+#else
-+static void
-+yy_stack_print (bottom, top)
-+ short int *bottom;
-+ short int *top;
- #endif
-+{
-+ YYFPRINTF (stderr, "Stack now");
-+ for (/* Nothing. */; bottom <= top; ++bottom)
-+ YYFPRINTF (stderr, " %d", *bottom);
-+ YYFPRINTF (stderr, "\n");
-+}
-+
-+# define YY_STACK_PRINT(Bottom, Top) \
-+do { \
-+ if (yydebug) \
-+ yy_stack_print ((Bottom), (Top)); \
-+} while (0)
-
--int yynerrs; /* number of parse errors so far */
--#endif /* not YYPURE */
-
--#if YYDEBUG != 0
--int yydebug; /* nonzero means print parse trace */
--/* Since this is uninitialized, it does not stop multiple parsers
-- from coexisting. */
-+/*------------------------------------------------.
-+| Report that the YYRULE is going to be reduced. |
-+`------------------------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yy_reduce_print (int yyrule)
-+#else
-+static void
-+yy_reduce_print (yyrule)
-+ int yyrule;
- #endif
-+{
-+ int yyi;
-+ unsigned int yylno = yyrline[yyrule];
-+ YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
-+ yyrule - 1, yylno);
-+ /* Print the symbols being reduced, and their result. */
-+ for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
-+ YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
-+ YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
-+}
-+
-+# define YY_REDUCE_PRINT(Rule) \
-+do { \
-+ if (yydebug) \
-+ yy_reduce_print (Rule); \
-+} while (0)
-+
-+/* Nonzero means print parse trace. It is left uninitialized so that
-+ multiple parsers can coexist. */
-+int yydebug;
-+#else /* !YYDEBUG */
-+# define YYDPRINTF(Args)
-+# define YYDSYMPRINT(Args)
-+# define YYDSYMPRINTF(Title, Token, Value, Location)
-+# define YY_STACK_PRINT(Bottom, Top)
-+# define YY_REDUCE_PRINT(Rule)
-+#endif /* !YYDEBUG */
-
--/* YYINITDEPTH indicates the initial size of the parser's stacks */
-
-+/* YYINITDEPTH -- initial size of the parser's stacks. */
- #ifndef YYINITDEPTH
--#define YYINITDEPTH 200
-+# define YYINITDEPTH 200
- #endif
-
--/* YYMAXDEPTH is the maximum size the stacks can grow to
-- (effective only if the built-in stack extension method is used). */
-+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
-+ if the built-in stack extension method is used).
-
--#if YYMAXDEPTH == 0
--#undef YYMAXDEPTH
-+ Do not make this value too large; the results are undefined if
-+ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
-+ evaluated with infinite-precision integer arithmetic. */
-+
-+#if defined (YYMAXDEPTH) && YYMAXDEPTH == 0
-+# undef YYMAXDEPTH
- #endif
-
- #ifndef YYMAXDEPTH
--#define YYMAXDEPTH 10000
-+# define YYMAXDEPTH 10000
- #endif
-+
- \f
--/* Define __yy_memcpy. Note that the size argument
-- should be passed with type unsigned int, because that is what the non-GCC
-- definitions require. With GCC, __builtin_memcpy takes an arg
-- of type size_t, but it can handle unsigned int. */
--
--#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
--#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
--#else /* not GNU C or C++ */
--#ifndef __cplusplus
-
--/* This is the most reliable way to avoid incompatibilities
-- in available built-in functions on various systems. */
--static void
--__yy_memcpy (to, from, count)
-- char *to;
-- char *from;
-- unsigned int count;
--{
-- register char *f = from;
-- register char *t = to;
-- register int i = count;
-+#if YYERROR_VERBOSE
-
-- while (i-- > 0)
-- *t++ = *f++;
-+# ifndef yystrlen
-+# if defined (__GLIBC__) && defined (_STRING_H)
-+# define yystrlen strlen
-+# else
-+/* Return the length of YYSTR. */
-+static YYSIZE_T
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystrlen (const char *yystr)
-+# else
-+yystrlen (yystr)
-+ const char *yystr;
-+# endif
-+{
-+ register const char *yys = yystr;
-+
-+ while (*yys++ != '\0')
-+ continue;
-+
-+ return yys - yystr - 1;
- }
-+# endif
-+# endif
-
--#else /* __cplusplus */
-+# ifndef yystpcpy
-+# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
-+# define yystpcpy stpcpy
-+# else
-+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
-+ YYDEST. */
-+static char *
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystpcpy (char *yydest, const char *yysrc)
-+# else
-+yystpcpy (yydest, yysrc)
-+ char *yydest;
-+ const char *yysrc;
-+# endif
-+{
-+ register char *yyd = yydest;
-+ register const char *yys = yysrc;
-+
-+ while ((*yyd++ = *yys++) != '\0')
-+ continue;
-+
-+ return yyd - 1;
-+}
-+# endif
-+# endif
-
--/* This is the most reliable way to avoid incompatibilities
-- in available built-in functions on various systems. */
-+#endif /* !YYERROR_VERBOSE */
-+
-+\f
-+
-+#if YYDEBUG
-+/*--------------------------------.
-+| Print this symbol on YYOUTPUT. |
-+`--------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
- static void
--__yy_memcpy (char *to, char *from, unsigned int count)
-+yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
-+#else
-+static void
-+yysymprint (yyoutput, yytype, yyvaluep)
-+ FILE *yyoutput;
-+ int yytype;
-+ YYSTYPE *yyvaluep;
-+#endif
- {
-- register char *t = to;
-- register char *f = from;
-- register int i = count;
-+ /* Pacify ``unused variable'' warnings. */
-+ (void) yyvaluep;
-
-- while (i-- > 0)
-- *t++ = *f++;
-+ if (yytype < YYNTOKENS)
-+ {
-+ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
-+# ifdef YYPRINT
-+ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-+# endif
-+ }
-+ else
-+ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-+
-+ switch (yytype)
-+ {
-+ default:
-+ break;
-+ }
-+ YYFPRINTF (yyoutput, ")");
- }
-
-+#endif /* ! YYDEBUG */
-+/*-----------------------------------------------.
-+| Release the memory associated to this symbol. |
-+`-----------------------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yydestruct (int yytype, YYSTYPE *yyvaluep)
-+#else
-+static void
-+yydestruct (yytype, yyvaluep)
-+ int yytype;
-+ YYSTYPE *yyvaluep;
- #endif
--#endif
-+{
-+ /* Pacify ``unused variable'' warnings. */
-+ (void) yyvaluep;
-+
-+ switch (yytype)
-+ {
-+
-+ default:
-+ break;
-+ }
-+}
- \f
--#line 217 "/usr/lib/bison.simple"
-
--/* The user can define YYPARSE_PARAM as the name of an argument to be passed
-- into yyparse. The argument should have type void *.
-- It should actually point to an object.
-- Grammar actions can access the variable by casting it
-- to the proper pointer type. */
-+/* Prevent warnings from -Wmissing-prototypes. */
-
- #ifdef YYPARSE_PARAM
--#ifdef __cplusplus
--#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
--#define YYPARSE_PARAM_DECL
--#else /* not __cplusplus */
--#define YYPARSE_PARAM_ARG YYPARSE_PARAM
--#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
--#endif /* not __cplusplus */
--#else /* not YYPARSE_PARAM */
--#define YYPARSE_PARAM_ARG
--#define YYPARSE_PARAM_DECL
--#endif /* not YYPARSE_PARAM */
-+# if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void *YYPARSE_PARAM);
-+# else
-+int yyparse ();
-+# endif
-+#else /* ! YYPARSE_PARAM */
-+#if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void);
-+#else
-+int yyparse ();
-+#endif
-+#endif /* ! YYPARSE_PARAM */
-+
-+
-+
-+/* The lookahead symbol. */
-+int yychar;
-+
-+/* The semantic value of the lookahead symbol. */
-+YYSTYPE yylval;
-+
-+/* Number of syntax errors so far. */
-+int yynerrs;
-+
-+
-+
-+/*----------.
-+| yyparse. |
-+`----------*/
-
--/* Prevent warning if -Wstrict-prototypes. */
--#ifdef __GNUC__
- #ifdef YYPARSE_PARAM
--int yyparse (void *);
-+# if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void *YYPARSE_PARAM)
-+# else
-+int yyparse (YYPARSE_PARAM)
-+ void *YYPARSE_PARAM;
-+# endif
-+#else /* ! YYPARSE_PARAM */
-+#if defined (__STDC__) || defined (__cplusplus)
-+int
-+yyparse (void)
- #else
--int yyparse (void);
-+int
-+yyparse ()
-+
- #endif
- #endif
--
--int
--yyparse(YYPARSE_PARAM_ARG)
-- YYPARSE_PARAM_DECL
- {
-+
- register int yystate;
- register int yyn;
-- register short *yyssp;
-+ int yyresult;
-+ /* Number of tokens to shift before error messages enabled. */
-+ int yyerrstatus;
-+ /* Lookahead token as an internal (translated) token number. */
-+ int yytoken = 0;
-+
-+ /* Three stacks and their tools:
-+ `yyss': related to states,
-+ `yyvs': related to semantic values,
-+ `yyls': related to locations.
-+
-+ Refer to the stacks thru separate pointers, to allow yyoverflow
-+ to reallocate them elsewhere. */
-+
-+ /* The state stack. */
-+ short int yyssa[YYINITDEPTH];
-+ short int *yyss = yyssa;
-+ register short int *yyssp;
-+
-+ /* The semantic value stack. */
-+ YYSTYPE yyvsa[YYINITDEPTH];
-+ YYSTYPE *yyvs = yyvsa;
- register YYSTYPE *yyvsp;
-- int yyerrstatus; /* number of tokens to shift before error messages enabled */
-- int yychar1 = 0; /* lookahead token as an internal (translated) token number */
-
-- short yyssa[YYINITDEPTH]; /* the state stack */
-- YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
-
-- short *yyss = yyssa; /* refer to the stacks thru separate pointers */
-- YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
-
--#ifdef YYLSP_NEEDED
-- YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
-- YYLTYPE *yyls = yylsa;
-- YYLTYPE *yylsp;
--
--#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
--#else
- #define YYPOPSTACK (yyvsp--, yyssp--)
--#endif
-
-- int yystacksize = YYINITDEPTH;
-- int yyfree_stacks = 0;
-+ YYSIZE_T yystacksize = YYINITDEPTH;
-
--#ifdef YYPURE
-- int yychar;
-- YYSTYPE yylval;
-- int yynerrs;
--#ifdef YYLSP_NEEDED
-- YYLTYPE yylloc;
--#endif
--#endif
-+ /* The variables used to return semantic value and location from the
-+ action routines. */
-+ YYSTYPE yyval;
-
-- YYSTYPE yyval; /* the variable used to return */
-- /* semantic values from the action */
-- /* routines */
-
-+ /* When reducing, the number of symbols on the RHS of the reduced
-+ rule. */
- int yylen;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Starting parse\n");
--#endif
-+ YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
-@@ -614,110 +1022,97 @@
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
-
-- yyssp = yyss - 1;
-+ yyssp = yyss;
- yyvsp = yyvs;
--#ifdef YYLSP_NEEDED
-- yylsp = yyls;
--#endif
-
--/* Push a new state, which is found in yystate . */
--/* In all cases, when you get here, the value and location stacks
-- have just been pushed. so pushing a state here evens the stacks. */
--yynewstate:
-
-- *++yyssp = yystate;
-+ goto yysetstate;
-
-- if (yyssp >= yyss + yystacksize - 1)
-- {
-- /* Give user a chance to reallocate the stack */
-- /* Use copies of these so that the &'s don't force the real ones into memory. */
-- YYSTYPE *yyvs1 = yyvs;
-- short *yyss1 = yyss;
--#ifdef YYLSP_NEEDED
-- YYLTYPE *yyls1 = yyls;
--#endif
-+/*------------------------------------------------------------.
-+| yynewstate -- Push a new state, which is found in yystate. |
-+`------------------------------------------------------------*/
-+ yynewstate:
-+ /* In all cases, when you get here, the value and location stacks
-+ have just been pushed. so pushing a state here evens the stacks.
-+ */
-+ yyssp++;
-
-+ yysetstate:
-+ *yyssp = yystate;
-+
-+ if (yyss + yystacksize - 1 <= yyssp)
-+ {
- /* Get the current used size of the three stacks, in elements. */
-- int size = yyssp - yyss + 1;
-+ YYSIZE_T yysize = yyssp - yyss + 1;
-
- #ifdef yyoverflow
-- /* Each stack pointer address is followed by the size of
-- the data in use in that stack, in bytes. */
--#ifdef YYLSP_NEEDED
-- /* This used to be a conditional around just the two extra args,
-- but that might be undefined if yyoverflow is a macro. */
-- yyoverflow("parser stack overflow",
-- &yyss1, size * sizeof (*yyssp),
-- &yyvs1, size * sizeof (*yyvsp),
-- &yyls1, size * sizeof (*yylsp),
-- &yystacksize);
--#else
-- yyoverflow("parser stack overflow",
-- &yyss1, size * sizeof (*yyssp),
-- &yyvs1, size * sizeof (*yyvsp),
-- &yystacksize);
--#endif
--
-- yyss = yyss1; yyvs = yyvs1;
--#ifdef YYLSP_NEEDED
-- yyls = yyls1;
--#endif
-+ {
-+ /* Give user a chance to reallocate the stack. Use copies of
-+ these so that the &'s don't force the real ones into
-+ memory. */
-+ YYSTYPE *yyvs1 = yyvs;
-+ short int *yyss1 = yyss;
-+
-+
-+ /* Each stack pointer address is followed by the size of the
-+ data in use in that stack, in bytes. This used to be a
-+ conditional around just the two extra args, but that might
-+ be undefined if yyoverflow is a macro. */
-+ yyoverflow ("parser stack overflow",
-+ &yyss1, yysize * sizeof (*yyssp),
-+ &yyvs1, yysize * sizeof (*yyvsp),
-+
-+ &yystacksize);
-+
-+ yyss = yyss1;
-+ yyvs = yyvs1;
-+ }
- #else /* no yyoverflow */
-+# ifndef YYSTACK_RELOCATE
-+ goto yyoverflowlab;
-+# else
- /* Extend the stack our own way. */
-- if (yystacksize >= YYMAXDEPTH)
-- {
-- yyerror("parser stack overflow");
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
--#endif
-- }
-- return 2;
-- }
-+ if (YYMAXDEPTH <= yystacksize)
-+ goto yyoverflowlab;
- yystacksize *= 2;
-- if (yystacksize > YYMAXDEPTH)
-+ if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
--#ifndef YYSTACK_USE_ALLOCA
-- yyfree_stacks = 1;
--#endif
-- yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
-- __yy_memcpy ((char *)yyss, (char *)yyss1,
-- size * (unsigned int) sizeof (*yyssp));
-- yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
-- __yy_memcpy ((char *)yyvs, (char *)yyvs1,
-- size * (unsigned int) sizeof (*yyvsp));
--#ifdef YYLSP_NEEDED
-- yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
-- __yy_memcpy ((char *)yyls, (char *)yyls1,
-- size * (unsigned int) sizeof (*yylsp));
--#endif
-+
-+ {
-+ short int *yyss1 = yyss;
-+ union yyalloc *yyptr =
-+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
-+ if (! yyptr)
-+ goto yyoverflowlab;
-+ YYSTACK_RELOCATE (yyss);
-+ YYSTACK_RELOCATE (yyvs);
-+
-+# undef YYSTACK_RELOCATE
-+ if (yyss1 != yyssa)
-+ YYSTACK_FREE (yyss1);
-+ }
-+# endif
- #endif /* no yyoverflow */
-
-- yyssp = yyss + size - 1;
-- yyvsp = yyvs + size - 1;
--#ifdef YYLSP_NEEDED
-- yylsp = yyls + size - 1;
--#endif
-+ yyssp = yyss + yysize - 1;
-+ yyvsp = yyvs + yysize - 1;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Stack size increased to %d\n", yystacksize);
--#endif
-
-- if (yyssp >= yyss + yystacksize - 1)
-+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
-+ (unsigned long int) yystacksize));
-+
-+ if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Entering state %d\n", yystate);
--#endif
-+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- goto yybackup;
-- yybackup:
-+
-+/*-----------.
-+| yybackup. |
-+`-----------*/
-+yybackup:
-
- /* Do appropriate processing given the current state. */
- /* Read a lookahead token if we need one and don't already have one. */
-@@ -726,135 +1121,99 @@
- /* First try to decide what to do without reference to lookahead token. */
-
- yyn = yypact[yystate];
-- if (yyn == YYFLAG)
-+ if (yyn == YYPACT_NINF)
- goto yydefault;
-
- /* Not known => get a lookahead token if don't already have one. */
-
-- /* yychar is either YYEMPTY or YYEOF
-- or a valid token in external form. */
--
-+ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
- if (yychar == YYEMPTY)
- {
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Reading a token: ");
--#endif
-+ YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
-- /* Convert token to internal form (in yychar1) for indexing tables with */
--
-- if (yychar <= 0) /* This means end of input. */
-+ if (yychar <= YYEOF)
- {
-- yychar1 = 0;
-- yychar = YYEOF; /* Don't call YYLEX any more */
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Now at end of input.\n");
--#endif
-+ yychar = yytoken = YYEOF;
-+ YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
-- yychar1 = YYTRANSLATE(yychar);
--
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
-- /* Give the individual parser a way to print the precise meaning
-- of a token, for further debugging info. */
--#ifdef YYPRINT
-- YYPRINT (stderr, yychar, yylval);
--#endif
-- fprintf (stderr, ")\n");
-- }
--#endif
-+ yytoken = YYTRANSLATE (yychar);
-+ YYDSYMPRINTF ("Next token is", yytoken, &yylval, &yylloc);
- }
-
-- yyn += yychar1;
-- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
-+ /* If the proper action on seeing token YYTOKEN is to reduce or to
-+ detect an error, take that action. */
-+ yyn += yytoken;
-+ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
--
- yyn = yytable[yyn];
--
-- /* yyn is what to do for this token type in this state.
-- Negative => reduce, -yyn is rule number.
-- Positive => shift, yyn is new state.
-- New state is final state => don't bother to shift,
-- just return success.
-- 0, or most negative number => error. */
--
-- if (yyn < 0)
-+ if (yyn <= 0)
- {
-- if (yyn == YYFLAG)
-+ if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-- else if (yyn == 0)
-- goto yyerrlab;
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- /* Shift the lookahead token. */
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
--#endif
-+ YYDPRINTF ((stderr, "Shifting token %s, ", yytname[yytoken]));
-
- /* Discard the token being shifted unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
-
- *++yyvsp = yylval;
--#ifdef YYLSP_NEEDED
-- *++yylsp = yylloc;
--#endif
-
-- /* count tokens shifted since error; after three, turn off error status. */
-- if (yyerrstatus) yyerrstatus--;
-+
-+ /* Count tokens shifted since error; after three, turn off error
-+ status. */
-+ if (yyerrstatus)
-+ yyerrstatus--;
-
- yystate = yyn;
- goto yynewstate;
-
--/* Do the default action for the current state. */
--yydefault:
-
-+/*-----------------------------------------------------------.
-+| yydefault -- do the default action for the current state. |
-+`-----------------------------------------------------------*/
-+yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
-+ goto yyreduce;
-+
-
--/* Do a reduction. yyn is the number of a rule to reduce with. */
-+/*-----------------------------.
-+| yyreduce -- Do a reduction. |
-+`-----------------------------*/
- yyreduce:
-+ /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-- if (yylen > 0)
-- yyval = yyvsp[1-yylen]; /* implement default value of the action */
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- int i;
--
-- fprintf (stderr, "Reducing via rule %d (line %d), ",
-- yyn, yyrline[yyn]);
-+ /* If YYLEN is nonzero, implement the default value of the action:
-+ `$$ = $1'.
-
-- /* Print the symbols being reduced, and their result. */
-- for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
-- fprintf (stderr, "%s ", yytname[yyrhs[i]]);
-- fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
-- }
--#endif
-+ Otherwise, the following line sets YYVAL to garbage.
-+ This behavior is undocumented and Bison
-+ users should not rely upon it. Assigning to YYVAL
-+ unconditionally makes the parser a bit smaller, and it avoids a
-+ GCC warning that YYVAL may be used uninitialized. */
-+ yyval = yyvsp[1-yylen];
-
-
-- switch (yyn) {
--
--case 5:
--#line 83 "cfg_y.y"
--{
-+ YY_REDUCE_PRINT (yyn);
-+ switch (yyn)
-+ {
-+ case 6:
-+#line 86 "cfg_y.y"
-+ {
- if (!curr_sig->uni)
- curr_sig->uni =
- #if defined(UNI30) || defined(DYNAMIC_UNI)
-@@ -873,17 +1232,19 @@
- #endif
- #endif
- ;
-- ;
-- break;}
--case 6:
--#line 107 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 7:
-+#line 110 "cfg_y.y"
-+ {
- set_verbosity(NULL,yyvsp[0].num);
-- ;
-- break;}
--case 12:
--#line 119 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 13:
-+#line 122 "cfg_y.y"
-+ {
- SIG_ENTITY *sig,**walk;
-
- if (atmpvc_addr_in_use(_entity.signaling_pvc))
-@@ -892,37 +1253,49 @@
- if (entities == &_entity) entities = NULL;
- for (sig = entities; sig; sig = sig->next)
- if (atm_equal((struct sockaddr *) &sig->signaling_pvc,
-- (struct sockaddr *) &yyvsp[0].pvc,0,0))
-- yyerror("duplicate PVC address %d.%d.%d",S_PVC(sig));
-+ (struct sockaddr *) &yyvsp[0].pvc,0,0)) {
-+ const char *err;
-+ asprintf(&err,"duplicate PVC address %d.%d.%d",S_PVC(sig));
-+ if(err) {
-+ yyerror(err);
-+ free(err);
-+ }
-+ else
-+ yyerror("duplicate PVC address");
-+ }
- curr_sig = alloc_t(SIG_ENTITY);
- *curr_sig = _entity;
- curr_sig->signaling_pvc = yyvsp[0].pvc;
- curr_sig->next = NULL;
- for (walk = &entities; *walk; walk = &(*walk)->next);
- *walk = curr_sig;
-- ;
-- break;}
--case 18:
--#line 150 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 19:
-+#line 161 "cfg_y.y"
-+ {
- enter_vpci(curr_sig,yyvsp[-2].num,yyvsp[0].num);
-- ;
-- break;}
--case 20:
--#line 155 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 21:
-+#line 166 "cfg_y.y"
-+ {
- curr_sig->sig_qos = yyvsp[0].str;
-- ;
-- break;}
--case 21:
--#line 159 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 22:
-+#line 170 "cfg_y.y"
-+ {
- curr_sig->max_rate = yyvsp[0].num;
-- ;
-- break;}
--case 22:
--#line 163 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 23:
-+#line 174 "cfg_y.y"
-+ {
- struct sockaddr_atmsvc addr;
- char *mask;
-
-@@ -931,464 +1304,506 @@
- if (text2atm(yyvsp[0].str,(struct sockaddr *) &addr,sizeof(addr),
- T2A_SVC | T2A_WILDCARD | T2A_NAME | T2A_LOCAL) < 0) {
- yyerror("invalid address");
-- return;
-+ return 0;
- }
- add_route(curr_sig,&addr,mask ? strtol(mask,NULL,10) : INT_MAX);
-- ;
-- break;}
--case 23:
--#line 177 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 24:
-+#line 188 "cfg_y.y"
-+ {
- add_route(curr_sig,NULL,0);
-- ;
-- break;}
--case 44:
--#line 229 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 45:
-+#line 240 "cfg_y.y"
-+ {
- set_verbosity("UNI",yyvsp[0].num);
- set_verbosity("KERNEL",yyvsp[0].num);
- set_verbosity("SAP",yyvsp[0].num);
-- ;
-- break;}
--case 45:
--#line 235 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 46:
-+#line 246 "cfg_y.y"
-+ {
- enter_vpci(curr_sig,yyvsp[-2].num,yyvsp[0].num);
-- ;
-- break;}
--case 46:
--#line 239 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 47:
-+#line 250 "cfg_y.y"
-+ {
- #if defined(UNI30) || defined(ALLOW_UNI30) || defined(DYNAMIC_UNI)
- if (curr_sig->uni & ~S_UNI31) yyerror("UNI mode is already set");
- curr_sig->uni |= S_UNI30;
- #else
- yyerror("Sorry, not supported yet");
- #endif
-- ;
-- break;}
--case 47:
--#line 248 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 48:
-+#line 259 "cfg_y.y"
-+ {
- #if defined(UNI31) || defined(ALLOW_UNI30) || defined(DYNAMIC_UNI)
- if (curr_sig->uni & ~S_UNI30) yyerror("UNI mode is already set");
- curr_sig->uni |= S_UNI31;
- #else
- yyerror("Sorry, not supported yet");
- #endif
-- ;
-- break;}
--case 48:
--#line 257 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 49:
-+#line 268 "cfg_y.y"
-+ {
- #if defined(UNI40) || defined(DYNAMIC_UNI)
- if (curr_sig->uni) yyerror("UNI mode is already set");
- curr_sig->uni = S_UNI40;
- #else
- yyerror("Sorry, not supported yet");
- #endif
-- ;
-- break;}
--case 49:
--#line 266 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 50:
-+#line 277 "cfg_y.y"
-+ {
- #if defined(Q2963_1) || defined(DYNAMIC_UNI)
- if (!(curr_sig->uni & S_UNI40)) yyerror("Incompatible UNI mode");
- curr_sig->uni |= S_Q2963_1;
- #else
- yyerror("Sorry, not supported yet");
- #endif
-- ;
-- break;}
--case 50:
--#line 275 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 51:
-+#line 286 "cfg_y.y"
-+ {
- yywarn("sig net is obsolete, please use sig mode net instead");
- curr_sig->mode = sm_net;
-- ;
-- break;}
--case 52:
--#line 284 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 53:
-+#line 295 "cfg_y.y"
-+ {
- set_verbosity("SSCF",yyvsp[0].num);
- set_verbosity("SSCOP",yyvsp[0].num);
-- ;
-- break;}
--case 53:
--#line 292 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 54:
-+#line 303 "cfg_y.y"
-+ {
- set_verbosity("IO",yyvsp[0].num);
-- ;
-- break;}
--case 54:
--#line 296 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 55:
-+#line 307 "cfg_y.y"
-+ {
- curr_sig->signaling_pvc = yyvsp[0].pvc;
-- ;
-- break;}
--case 55:
--#line 300 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 56:
-+#line 311 "cfg_y.y"
-+ {
- yywarn("io pcr is obsolete, please use io qos instead");
- curr_sig->sig_pcr = yyvsp[0].num;
-- ;
-- break;}
--case 56:
--#line 305 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 57:
-+#line 316 "cfg_y.y"
-+ {
- curr_sig->sig_qos = yyvsp[0].str;
-- ;
-- break;}
--case 57:
--#line 309 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 58:
-+#line 320 "cfg_y.y"
-+ {
- curr_sig->max_rate = yyvsp[0].num;
-- ;
-- break;}
--case 58:
--#line 316 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 59:
-+#line 327 "cfg_y.y"
-+ {
- set_verbosity(NULL,yyvsp[0].num);
-- ;
-- break;}
--case 59:
--#line 320 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 60:
-+#line 331 "cfg_y.y"
-+ {
- dump_dir = yyvsp[0].str;
- if (!trace_size) trace_size = DEFAULT_TRACE_SIZE;
-- ;
-- break;}
--case 60:
--#line 325 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 61:
-+#line 336 "cfg_y.y"
-+ {
- set_logfile(yyvsp[0].str);
-- ;
-- break;}
--case 61:
--#line 329 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 62:
-+#line 340 "cfg_y.y"
-+ {
- trace_size = yyvsp[0].num;
-- ;
-- break;}
--case 62:
--#line 335 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 63:
-+#line 346 "cfg_y.y"
-+ {
- yyval.num = DEFAULT_TRACE_SIZE;
-- ;
-- break;}
--case 63:
--#line 339 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 64:
-+#line 350 "cfg_y.y"
-+ {
- yyval.num = yyvsp[0].num;
-- ;
-- break;}
--case 64:
--#line 346 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 65:
-+#line 357 "cfg_y.y"
-+ {
- yyval.num = DIAG_DEBUG;
-- ;
-- break;}
--case 65:
--#line 350 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 66:
-+#line 361 "cfg_y.y"
-+ {
- yyval.num = DIAG_INFO;
-- ;
-- break;}
--case 66:
--#line 354 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 67:
-+#line 365 "cfg_y.y"
-+ {
- yyval.num = DIAG_WARN;
-- ;
-- break;}
--case 67:
--#line 358 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 68:
-+#line 369 "cfg_y.y"
-+ {
- yyval.num = DIAG_ERROR;
-- ;
-- break;}
--case 68:
--#line 362 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 69:
-+#line 373 "cfg_y.y"
-+ {
- yyval.num = DIAG_FATAL;
-- ;
-- break;}
--case 69:
--#line 369 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 70:
-+#line 380 "cfg_y.y"
-+ {
- curr_sig->mode = sm_user;
-- ;
-- break;}
--case 70:
--#line 373 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 71:
-+#line 384 "cfg_y.y"
-+ {
- curr_sig->mode = sm_net;
-- ;
-- break;}
--case 71:
--#line 377 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 72:
-+#line 388 "cfg_y.y"
-+ {
- curr_sig->mode = sm_switch;
-- ;
-- break;}
--case 72:
--#line 384 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 73:
-+#line 395 "cfg_y.y"
-+ {
- set_verbosity("POLICY",yyvsp[0].num);
-- ;
-- break;}
--case 73:
--#line 388 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 74:
-+#line 399 "cfg_y.y"
-+ {
- rule = alloc_t(RULE);
- rule->type = yyvsp[0].num;
-- ;
-- break;}
--case 75:
--#line 397 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 76:
-+#line 408 "cfg_y.y"
-+ {
- yyval.num = ACL_ALLOW;
-- ;
-- break;}
--case 76:
--#line 401 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 77:
-+#line 412 "cfg_y.y"
-+ {
- yyval.num = ACL_REJECT;
-- ;
-- break;}
--case 77:
--#line 408 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 78:
-+#line 419 "cfg_y.y"
-+ {
- rule->type |= ACL_IN;
- put_address(yyvsp[0].str);
-- ;
-- break;}
--case 78:
--#line 413 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 79:
-+#line 424 "cfg_y.y"
-+ {
- rule->type |= ACL_OUT;
- put_address(yyvsp[0].str);
-- ;
-- break;}
--}
-- /* the action file gets copied in in place of this dollarsign */
--#line 543 "/usr/lib/bison.simple"
-+ }
-+ break;
-+
-+
-+ }
-+
-+/* Line 1010 of yacc.c. */
-+#line 1585 "y.tab.c"
- \f
- yyvsp -= yylen;
- yyssp -= yylen;
--#ifdef YYLSP_NEEDED
-- yylsp -= yylen;
--#endif
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- short *ssp1 = yyss - 1;
-- fprintf (stderr, "state stack now");
-- while (ssp1 != yyssp)
-- fprintf (stderr, " %d", *++ssp1);
-- fprintf (stderr, "\n");
-- }
--#endif
-+
-+ YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
-
--#ifdef YYLSP_NEEDED
-- yylsp++;
-- if (yylen == 0)
-- {
-- yylsp->first_line = yylloc.first_line;
-- yylsp->first_column = yylloc.first_column;
-- yylsp->last_line = (yylsp-1)->last_line;
-- yylsp->last_column = (yylsp-1)->last_column;
-- yylsp->text = 0;
-- }
-- else
-- {
-- yylsp->last_line = (yylsp+yylen-1)->last_line;
-- yylsp->last_column = (yylsp+yylen-1)->last_column;
-- }
--#endif
-
-- /* Now "shift" the result of the reduction.
-- Determine what state that goes to,
-- based on the state we popped back to
-- and the rule number reduced by. */
-+ /* Now `shift' the result of the reduction. Determine what state
-+ that goes to, based on the state we popped back to and the rule
-+ number reduced by. */
-
- yyn = yyr1[yyn];
-
-- yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
-- if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-+ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
-+ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
-- yystate = yydefgoto[yyn - YYNTBASE];
-+ yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
--yyerrlab: /* here on detecting error */
-
-- if (! yyerrstatus)
-- /* If not already recovering from an error, report this error. */
-+/*------------------------------------.
-+| yyerrlab -- here on detecting error |
-+`------------------------------------*/
-+yyerrlab:
-+ /* If not already recovering from an error, report this error. */
-+ if (!yyerrstatus)
- {
- ++yynerrs;
--
--#ifdef YYERROR_VERBOSE
-+#if YYERROR_VERBOSE
- yyn = yypact[yystate];
-
-- if (yyn > YYFLAG && yyn < YYLAST)
-+ if (YYPACT_NINF < yyn && yyn < YYLAST)
- {
-- int size = 0;
-- char *msg;
-- int x, count;
--
-- count = 0;
-- /* Start X at -yyn if nec to avoid negative indexes in yycheck. */
-- for (x = (yyn < 0 ? -yyn : 0);
-- x < (sizeof(yytname) / sizeof(char *)); x++)
-- if (yycheck[x + yyn] == x)
-- size += strlen(yytname[x]) + 15, count++;
-- msg = (char *) malloc(size + 15);
-- if (msg != 0)
-+ YYSIZE_T yysize = 0;
-+ int yytype = YYTRANSLATE (yychar);
-+ const char* yyprefix;
-+ char *yymsg;
-+ int yyx;
-+
-+ /* Start YYX at -YYN if negative to avoid negative indexes in
-+ YYCHECK. */
-+ int yyxbegin = yyn < 0 ? -yyn : 0;
-+
-+ /* Stay within bounds of both yycheck and yytname. */
-+ int yychecklim = YYLAST - yyn;
-+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
-+ int yycount = 0;
-+
-+ yyprefix = ", expecting ";
-+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
-+ {
-+ yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
-+ yycount += 1;
-+ if (yycount == 5)
-+ {
-+ yysize = 0;
-+ break;
-+ }
-+ }
-+ yysize += (sizeof ("syntax error, unexpected ")
-+ + yystrlen (yytname[yytype]));
-+ yymsg = (char *) YYSTACK_ALLOC (yysize);
-+ if (yymsg != 0)
- {
-- strcpy(msg, "parse error");
-+ char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
-+ yyp = yystpcpy (yyp, yytname[yytype]);
-
-- if (count < 5)
-+ if (yycount < 5)
- {
-- count = 0;
-- for (x = (yyn < 0 ? -yyn : 0);
-- x < (sizeof(yytname) / sizeof(char *)); x++)
-- if (yycheck[x + yyn] == x)
-+ yyprefix = ", expecting ";
-+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
-- strcat(msg, count == 0 ? ", expecting `" : " or `");
-- strcat(msg, yytname[x]);
-- strcat(msg, "'");
-- count++;
-+ yyp = yystpcpy (yyp, yyprefix);
-+ yyp = yystpcpy (yyp, yytname[yyx]);
-+ yyprefix = " or ";
- }
- }
-- yyerror(msg);
-- free(msg);
-+ yyerror (yymsg);
-+ YYSTACK_FREE (yymsg);
- }
- else
-- yyerror ("parse error; also virtual memory exceeded");
-+ yyerror ("syntax error; also virtual memory exhausted");
- }
- else
- #endif /* YYERROR_VERBOSE */
-- yyerror("parse error");
-+ yyerror ("syntax error");
- }
-
-- goto yyerrlab1;
--yyerrlab1: /* here on error raised explicitly by an action */
-+
-
- if (yyerrstatus == 3)
- {
-- /* if just tried and failed to reuse lookahead token after an error, discard it. */
-+ /* If just tried and failed to reuse lookahead token after an
-+ error, discard it. */
-
-- /* return failure if at end of input */
-- if (yychar == YYEOF)
-- YYABORT;
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
--#endif
-+ if (yychar <= YYEOF)
-+ {
-+ /* If at end of input, pop the error token,
-+ then the rest of the stack, then return failure. */
-+ if (yychar == YYEOF)
-+ for (;;)
-+ {
-+ YYPOPSTACK;
-+ if (yyssp == yyss)
-+ YYABORT;
-+ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
-+ yydestruct (yystos[*yyssp], yyvsp);
-+ }
-+ }
-+ else
-+ {
-+ YYDSYMPRINTF ("Error: discarding", yytoken, &yylval, &yylloc);
-+ yydestruct (yytoken, &yylval);
-+ yychar = YYEMPTY;
-
-- yychar = YYEMPTY;
-+ }
- }
-
-- /* Else will try to reuse lookahead token
-- after shifting the error token. */
--
-- yyerrstatus = 3; /* Each real token shifted decrements this */
-+ /* Else will try to reuse lookahead token after shifting the error
-+ token. */
-+ goto yyerrlab1;
-
-- goto yyerrhandle;
-
--yyerrdefault: /* current state does not do anything special for the error token. */
-+/*---------------------------------------------------.
-+| yyerrorlab -- error raised explicitly by YYERROR. |
-+`---------------------------------------------------*/
-+yyerrorlab:
-
--#if 0
-- /* This is wrong; only states that explicitly want error tokens
-- should shift them. */
-- yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
-- if (yyn) goto yydefault;
-+#ifdef __GNUC__
-+ /* Pacify GCC when the user code never invokes YYERROR and the label
-+ yyerrorlab therefore never appears in user code. */
-+ if (0)
-+ goto yyerrorlab;
- #endif
-
--yyerrpop: /* pop the current state because it cannot handle the error token */
--
-- if (yyssp == yyss) YYABORT;
-- yyvsp--;
-- yystate = *--yyssp;
--#ifdef YYLSP_NEEDED
-- yylsp--;
--#endif
-+ yyvsp -= yylen;
-+ yyssp -= yylen;
-+ yystate = *yyssp;
-+ goto yyerrlab1;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- short *ssp1 = yyss - 1;
-- fprintf (stderr, "Error: state stack now");
-- while (ssp1 != yyssp)
-- fprintf (stderr, " %d", *++ssp1);
-- fprintf (stderr, "\n");
-- }
--#endif
-
--yyerrhandle:
-+/*-------------------------------------------------------------.
-+| yyerrlab1 -- common code for both syntax error and YYERROR. |
-+`-------------------------------------------------------------*/
-+yyerrlab1:
-+ yyerrstatus = 3; /* Each real token shifted decrements this. */
-
-- yyn = yypact[yystate];
-- if (yyn == YYFLAG)
-- goto yyerrdefault;
-+ for (;;)
-+ {
-+ yyn = yypact[yystate];
-+ if (yyn != YYPACT_NINF)
-+ {
-+ yyn += YYTERROR;
-+ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
-+ {
-+ yyn = yytable[yyn];
-+ if (0 < yyn)
-+ break;
-+ }
-+ }
-
-- yyn += YYTERROR;
-- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
-- goto yyerrdefault;
-+ /* Pop the current state because it cannot handle the error token. */
-+ if (yyssp == yyss)
-+ YYABORT;
-
-- yyn = yytable[yyn];
-- if (yyn < 0)
-- {
-- if (yyn == YYFLAG)
-- goto yyerrpop;
-- yyn = -yyn;
-- goto yyreduce;
-+ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
-+ yydestruct (yystos[yystate], yyvsp);
-+ YYPOPSTACK;
-+ yystate = *yyssp;
-+ YY_STACK_PRINT (yyss, yyssp);
- }
-- else if (yyn == 0)
-- goto yyerrpop;
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Shifting error token, ");
--#endif
-+ YYDPRINTF ((stderr, "Shifting error token, "));
-
- *++yyvsp = yylval;
--#ifdef YYLSP_NEEDED
-- *++yylsp = yylloc;
--#endif
-+
-
- yystate = yyn;
- goto yynewstate;
-
-- yyacceptlab:
-- /* YYACCEPT comes here. */
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
--#endif
-- }
-- return 0;
-
-- yyabortlab:
-- /* YYABORT comes here. */
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
-+/*-------------------------------------.
-+| yyacceptlab -- YYACCEPT comes here. |
-+`-------------------------------------*/
-+yyacceptlab:
-+ yyresult = 0;
-+ goto yyreturn;
-+
-+/*-----------------------------------.
-+| yyabortlab -- YYABORT comes here. |
-+`-----------------------------------*/
-+yyabortlab:
-+ yyresult = 1;
-+ goto yyreturn;
-+
-+#ifndef yyoverflow
-+/*----------------------------------------------.
-+| yyoverflowlab -- parser overflow comes here. |
-+`----------------------------------------------*/
-+yyoverflowlab:
-+ yyerror ("parser stack overflow");
-+ yyresult = 2;
-+ /* Fall through. */
-+#endif
-+
-+yyreturn:
-+#ifndef yyoverflow
-+ if (yyss != yyssa)
-+ YYSTACK_FREE (yyss);
- #endif
-- }
-- return 1;
-+ return yyresult;
- }
--#line 418 "cfg_y.y"
-+
-+
-+
---- linux-atm-2.4.1.orig/src/sigd/proto.c
-+++ linux-atm-2.4.1/src/sigd/proto.c
-@@ -259,6 +259,7 @@
- break;
- }
- default:
-+ break;
- }
- va_end(ap);
- if ((size = q_close(&dsc)) >= 0) to_signaling(sock->sig,q_buffer,size);
-@@ -288,6 +289,7 @@
- }
- break;
- default:
-+ break;
- }
- va_end(ap);
- }
---- linux-atm-2.4.1.orig/src/sigd/cfg_y.y
-+++ linux-atm-2.4.1/src/sigd/cfg_y.y
-@@ -7,6 +7,7 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
- #include <string.h>
- #include <ctype.h>
- #include <limits.h>
-@@ -19,6 +20,8 @@
- #include "trace.h"
- #include "policy.h"
-
-+extern void yywarn(const char *s);
-+extern void yyerror(const char *s);
-
- static RULE *rule;
- static SIG_ENTITY *curr_sig = &_entity;
-@@ -125,8 +128,16 @@
- if (entities == &_entity) entities = NULL;
- for (sig = entities; sig; sig = sig->next)
- if (atm_equal((struct sockaddr *) &sig->signaling_pvc,
-- (struct sockaddr *) &$2,0,0))
-- yyerror("duplicate PVC address %d.%d.%d",S_PVC(sig));
-+ (struct sockaddr *) &$2,0,0)) {
-+ const char *err;
-+ asprintf(&err,"duplicate PVC address %d.%d.%d",S_PVC(sig));
-+ if(err) {
-+ yyerror(err);
-+ free(err);
-+ }
-+ else
-+ yyerror("duplicate PVC address");
-+ }
- curr_sig = alloc_t(SIG_ENTITY);
- *curr_sig = _entity;
- curr_sig->signaling_pvc = $2;
-@@ -169,7 +180,7 @@
- if (text2atm($1,(struct sockaddr *) &addr,sizeof(addr),
- T2A_SVC | T2A_WILDCARD | T2A_NAME | T2A_LOCAL) < 0) {
- yyerror("invalid address");
-- return;
-+ return 0;
- }
- add_route(curr_sig,&addr,mask ? strtol(mask,NULL,10) : INT_MAX);
- }
---- linux-atm-2.4.1.orig/src/sigd/cfg_y.h
-+++ linux-atm-2.4.1/src/sigd/cfg_y.h
-@@ -1,44 +1,127 @@
--typedef union {
-+/* A Bison parser, made by GNU Bison 1.875d. */
-+
-+/* Skeleton parser for Yacc-like parsing with Bison,
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* Tokens. */
-+#ifndef YYTOKENTYPE
-+# define YYTOKENTYPE
-+ /* Put the tokens into the symbol table, so that GDB and other debuggers
-+ know about them. */
-+ enum yytokentype {
-+ TOK_LEVEL = 258,
-+ TOK_DEBUG = 259,
-+ TOK_INFO = 260,
-+ TOK_WARN = 261,
-+ TOK_ERROR = 262,
-+ TOK_FATAL = 263,
-+ TOK_SIG = 264,
-+ TOK_UNI30 = 265,
-+ TOK_UNI31 = 266,
-+ TOK_UNI40 = 267,
-+ TOK_Q2963_1 = 268,
-+ TOK_SAAL = 269,
-+ TOK_VC = 270,
-+ TOK_IO = 271,
-+ TOK_MODE = 272,
-+ TOK_USER = 273,
-+ TOK_NET = 274,
-+ TOK_SWITCH = 275,
-+ TOK_VPCI = 276,
-+ TOK_ITF = 277,
-+ TOK_PCR = 278,
-+ TOK_TRACE = 279,
-+ TOK_POLICY = 280,
-+ TOK_ALLOW = 281,
-+ TOK_REJECT = 282,
-+ TOK_ENTITY = 283,
-+ TOK_DEFAULT = 284,
-+ TOK_NUMBER = 285,
-+ TOK_MAX_RATE = 286,
-+ TOK_DUMP_DIR = 287,
-+ TOK_LOGFILE = 288,
-+ TOK_QOS = 289,
-+ TOK_FROM = 290,
-+ TOK_TO = 291,
-+ TOK_ROUTE = 292,
-+ TOK_PVC = 293
-+ };
-+#endif
-+#define TOK_LEVEL 258
-+#define TOK_DEBUG 259
-+#define TOK_INFO 260
-+#define TOK_WARN 261
-+#define TOK_ERROR 262
-+#define TOK_FATAL 263
-+#define TOK_SIG 264
-+#define TOK_UNI30 265
-+#define TOK_UNI31 266
-+#define TOK_UNI40 267
-+#define TOK_Q2963_1 268
-+#define TOK_SAAL 269
-+#define TOK_VC 270
-+#define TOK_IO 271
-+#define TOK_MODE 272
-+#define TOK_USER 273
-+#define TOK_NET 274
-+#define TOK_SWITCH 275
-+#define TOK_VPCI 276
-+#define TOK_ITF 277
-+#define TOK_PCR 278
-+#define TOK_TRACE 279
-+#define TOK_POLICY 280
-+#define TOK_ALLOW 281
-+#define TOK_REJECT 282
-+#define TOK_ENTITY 283
-+#define TOK_DEFAULT 284
-+#define TOK_NUMBER 285
-+#define TOK_MAX_RATE 286
-+#define TOK_DUMP_DIR 287
-+#define TOK_LOGFILE 288
-+#define TOK_QOS 289
-+#define TOK_FROM 290
-+#define TOK_TO 291
-+#define TOK_ROUTE 292
-+#define TOK_PVC 293
-+
-+
-+
-+
-+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
-+#line 56 "cfg_y.y"
-+typedef union YYSTYPE {
- int num;
- char *str;
- struct sockaddr_atmpvc pvc;
- } YYSTYPE;
--#define TOK_LEVEL 257
--#define TOK_DEBUG 258
--#define TOK_INFO 259
--#define TOK_WARN 260
--#define TOK_ERROR 261
--#define TOK_FATAL 262
--#define TOK_SIG 263
--#define TOK_UNI30 264
--#define TOK_UNI31 265
--#define TOK_UNI40 266
--#define TOK_Q2963_1 267
--#define TOK_SAAL 268
--#define TOK_VC 269
--#define TOK_IO 270
--#define TOK_MODE 271
--#define TOK_USER 272
--#define TOK_NET 273
--#define TOK_SWITCH 274
--#define TOK_VPCI 275
--#define TOK_ITF 276
--#define TOK_PCR 277
--#define TOK_TRACE 278
--#define TOK_POLICY 279
--#define TOK_ALLOW 280
--#define TOK_REJECT 281
--#define TOK_ENTITY 282
--#define TOK_DEFAULT 283
--#define TOK_NUMBER 284
--#define TOK_MAX_RATE 285
--#define TOK_DUMP_DIR 286
--#define TOK_LOGFILE 287
--#define TOK_QOS 288
--#define TOK_FROM 289
--#define TOK_TO 290
--#define TOK_ROUTE 291
--#define TOK_PVC 292
--
-+/* Line 1285 of yacc.c. */
-+#line 119 "y.tab.h"
-+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-+# define YYSTYPE_IS_DECLARED 1
-+# define YYSTYPE_IS_TRIVIAL 1
-+#endif
-
- extern YYSTYPE yylval;
-+
-+
-+
---- linux-atm-2.4.1.orig/src/maint/Makefile.in
-+++ linux-atm-2.4.1/src/maint/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -181,8 +181,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/atmaddr.P .deps/atmdiag.P .deps/atmdump.P \
-+.deps/atmloop.P .deps/atmtcp.P .deps/enitune.P .deps/esi.P \
-+.deps/saaldump.P .deps/sonetdiag.P .deps/zntune.P
- SOURCES = $(atmdiag_SOURCES) $(atmdump_SOURCES) $(sonetdiag_SOURCES) $(saaldump_SOURCES) $(atmaddr_SOURCES) $(esi_SOURCES) $(atmloop_SOURCES) $(atmtcp_SOURCES) $(enitune_SOURCES) $(zntune_SOURCES)
- OBJECTS = $(atmdiag_OBJECTS) $(atmdump_OBJECTS) $(sonetdiag_OBJECTS) $(saaldump_OBJECTS) $(atmaddr_OBJECTS) $(esi_OBJECTS) $(atmloop_OBJECTS) $(atmtcp_OBJECTS) $(enitune_OBJECTS) $(zntune_OBJECTS)
-
-@@ -190,9 +193,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/maint/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/maint/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -247,9 +250,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -272,9 +272,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -388,7 +385,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -404,6 +401,11 @@
- subdir = src/maint
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/maint/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -414,28 +416,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--atmaddr.o: atmaddr.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--atmdiag.o: atmdiag.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--atmdump.o: atmdump.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h
--atmloop.o: atmloop.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--atmtcp.o: atmtcp.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmd.h
--enitune.o: enitune.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--esi.o: esi.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--saaldump.o: saaldump.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/saal/pdu.h \
-- ../../src/include/atmd.h ../../src/qgen/qlib.h
--sonetdiag.o: sonetdiag.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
--zntune.o: zntune.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -475,18 +487,19 @@
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-sbinPROGRAMS \
- mostlyclean-compile mostlyclean-libtool \
-- mostlyclean-tags mostlyclean-generic
-+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-binPROGRAMS clean-sbinPROGRAMS clean-compile \
-- clean-libtool clean-tags clean-generic mostlyclean-am
-+ clean-libtool clean-tags clean-depend clean-generic \
-+ mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-binPROGRAMS distclean-sbinPROGRAMS \
- distclean-compile distclean-libtool distclean-tags \
-- distclean-generic clean-am
-+ distclean-depend distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-@@ -494,7 +507,8 @@
- maintainer-clean-am: maintainer-clean-binPROGRAMS \
- maintainer-clean-sbinPROGRAMS maintainer-clean-compile \
- maintainer-clean-libtool maintainer-clean-tags \
-- maintainer-clean-generic distclean-am
-+ maintainer-clean-depend maintainer-clean-generic \
-+ distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -508,12 +522,14 @@
- clean-compile maintainer-clean-compile mostlyclean-libtool \
- distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
- uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/maint/atmtcp.c
-+++ linux-atm-2.4.1/src/maint/atmtcp.c
-@@ -60,7 +60,7 @@
- static IN *inputs = NULL;
- static fd_set in_set;
- static int fds = 0;
--static int debug = 0;
-+static int atmtcp_debug = 0;
- static int links = 0;
-
-
-@@ -86,7 +86,7 @@
- {
- OUT *out;
-
-- if (debug)
-+ if (atmtcp_debug)
- fprintf(stderr,"Emit: %d.%d, %d bytes\n",ntohs(hdr->vpi),
- ntohs(hdr->vci),(int) ntohl(hdr->length));
- for (out = outputs; out; out = out->next)
-@@ -99,7 +99,7 @@
- OUT *out;
- int changed = 0;
-
-- if (debug)
-+ if (atmtcp_debug)
- fprintf(stderr,"Control: (%d.%d) %s %d.%d, vcc %s\n",
- ntohs(msg->hdr.vpi),ntohs(msg->hdr.vci),
- msg->type == ATMTCP_CTRL_OPEN ? "OPEN" :
-@@ -295,19 +295,19 @@
- }
- if ((s = socket(PF_ATMPVC,SOCK_DGRAM,0)) < 0) {
- msg->result = -errno;
-- if (debug) perror("socket");
-+ if (atmtcp_debug) perror("socket");
- return 1;
- }
- if (setsockopt(s,SOL_ATM,SO_ATMQOS,&msg->qos,sizeof(msg->qos)) < 0) {
- msg->result = -errno;
-- if (debug) perror("setsockopt SO_ATMQOS");
-+ if (atmtcp_debug) perror("setsockopt SO_ATMQOS");
- return 1;
- }
- msg->addr.sap_addr.itf = data->itf;
- if (connect(s,(struct sockaddr *) &msg->addr,
- sizeof(struct sockaddr_atmpvc)) < 0) {
- msg->result = -errno;
-- if (debug) perror("connect");
-+ if (atmtcp_debug) perror("connect");
- return 1;
- }
- (*vcc) = alloc_t(VCC);
-@@ -333,7 +333,7 @@
- addr.sap_addr.vci = ntohs(hdr->vci);
- vcc = real_lookup(data,&addr);
- if (!*vcc) {
-- if (debug)
-+ if (atmtcp_debug)
- fprintf(stderr,"VCC %d.%d not found\n",addr.sap_addr.vpi,
- addr.sap_addr.vci);
- return;
-@@ -430,7 +430,7 @@
- exit(1);
- }
- if (in->bytes < sizeof(*hdr)+ntohl(hdr->length)) return;
-- if (debug)
-+ if (atmtcp_debug)
- fprintf(stderr,"TCP %d.%d, %d bytes\n",ntohs(hdr->vpi),
- ntohs(hdr->vci),(unsigned int) ntohl(hdr->length));
- in->bytes = 0;
-@@ -447,7 +447,7 @@
- fprintf(stderr,"unrecognized control message \"%s\"\n",msg);
- return;
- }
-- if (debug) fprintf(stderr,"received control \"%s\"\n",msg);
-+ if (atmtcp_debug) fprintf(stderr,"received control \"%s\"\n",msg);
- ctl.hdr.vpi = htons(vpi);
- ctl.hdr.vci = htons(vci);
- ctl.hdr.length = htonl(ATMTCP_HDR_MAGIC);
-@@ -508,7 +508,7 @@
- }
- hdr->vpi = hdr->vci = htons(0);
- hdr->length = htonl(pos-start);
-- if (debug) fprintf(stderr,"sending control \"%s\"\n",start);
-+ if (atmtcp_debug) fprintf(stderr,"sending control \"%s\"\n",start);
- tcp_do_send(*(int *) out->user,buf,pos-buf);
- return 0;
- }
-@@ -555,7 +555,7 @@
- exit(1);
- }
- if (in->bytes < sizeof(int)+sizeof(*hdr)+ntohl(hdr->length)) return;
-- if (debug)
-+ if (atmtcp_debug)
- fprintf(stderr,"File %d.%d, %d bytes\n",ntohs(hdr->vpi),
- ntohs(hdr->vci),(unsigned int) ntohl(hdr->length));
- }
-@@ -708,7 +708,7 @@
- while ((c = getopt(argc,argv,"dvV")) != EOF)
- switch (c) {
- case 'd':
-- debug = 1;
-+ atmtcp_debug = 1;
- break;
- case 'v':
- verbose = 1;
-@@ -817,7 +817,8 @@
- }
- else if (!strcmp(ARG,"listen") ||
- (do_background = !strcmp(ARG,"listen-bg"))) {
-- int fd,port,addr_len;
-+ int fd,port;
-+ size_t addr_len;
- int *fd2 = alloc_t(int);
-
- if ((fd = socket(PF_INET,SOCK_STREAM,0)) < 0) {
---- linux-atm-2.4.1.orig/src/maint/enitune.c
-+++ linux-atm-2.4.1/src/maint/enitune.c
-@@ -44,6 +44,7 @@
- if (*end || mult.rx <= 100) usage(name);
- break;
- default:
-+ break;
- }
- if (argc != optind+1) usage(name);
- sioc.number = strtol(argv[optind],&end,0);
---- linux-atm-2.4.1.orig/src/arpd/Makefile.in
-+++ linux-atm-2.4.1/src/arpd/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -90,8 +90,7 @@
- sbin_PROGRAMS = atmarp atmarpd
-
- atmarp_SOURCES = atmarp.c atmarp.h atmarpd.h
--atmarpd_SOURCES = atmarpd.c atmarpd.h arp.c arp.h io.c io.h itf.c itf.h \
-- table.c table.h atmarp.h
-+atmarpd_SOURCES = atmarpd.c atmarpd.h arp.c arp.h io.c io.h itf.c itf.h table.c table.h atmarp.h
-
-
- include_HEADERS = atmarp.h atmarpd.h
-@@ -135,8 +134,10 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/arp.P .deps/atmarp.P .deps/atmarpd.P .deps/io.P \
-+.deps/itf.P .deps/table.P
- SOURCES = $(atmarp_SOURCES) $(atmarpd_SOURCES)
- OBJECTS = $(atmarp_OBJECTS) $(atmarpd_OBJECTS)
-
-@@ -144,9 +145,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/arpd/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/arpd/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -176,9 +177,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -201,9 +199,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -300,7 +295,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -316,6 +311,11 @@
- subdir = src/arpd
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/arpd/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -326,24 +326,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--arp.o: arp.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmd.h atmarp.h \
-- atmarpd.h table.h itf.h io.h arp.h
--atmarp.o: atmarp.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmd.h atmarpd.h
--atmarpd.o: atmarpd.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h atmarpd.h \
-- io.h table.h
--io.o: io.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmd.h atmarpd.h \
-- table.h arp.h atmarp.h itf.h io.h
--itf.o: itf.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atmd.h ../../src/include/atm.h table.h io.h \
-- itf.h arp.h atmarp.h atmarpd.h
--table.o: table.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmd.h atmarpd.h \
-- table.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -383,27 +397,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-sbinPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -416,8 +430,9 @@
- distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
- uninstall-man8 install-man uninstall-man uninstall-includeHEADERS \
- install-includeHEADERS tags mostlyclean-tags distclean-tags clean-tags \
--maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \
--installcheck-am installcheck install-exec-am install-exec \
-+maintainer-clean-tags distdir mostlyclean-depend distclean-depend \
-+clean-depend maintainer-clean-depend info-am info dvi-am dvi check \
-+check-am installcheck-am installcheck install-exec-am install-exec \
- install-data-am install-data install-am install uninstall-am uninstall \
- all-redirect all-am all installdirs mostlyclean-generic \
- distclean-generic clean-generic maintainer-clean-generic clean \
---- linux-atm-2.4.1.orig/src/arpd/atmarp.c
-+++ linux-atm-2.4.1/src/arpd/atmarp.c
-@@ -92,7 +92,7 @@
- perror("read " ATMARP_DUMP_DIR "/" ATMARP_DUMP_FILE);
- return 1;
- }
-- if (write(0,buffer,size) < 0) {
-+ if (write(1,buffer,size) < 0) {
- perror("write stdout");
- return 1;
- }
---- linux-atm-2.4.1.orig/src/ilmid/Makefile.in
-+++ linux-atm-2.4.1/src/ilmid/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -91,13 +91,9 @@
-
- sbin_PROGRAMS = ilmid
-
--ilmid_SOURCES = rfc1157_snmp.c rfc1157_snmp.h rfc1155_smi.c rfc1155_smi.h \
-- util.c util.h io.c io.h message.c message.h \
-- atmf_uni.c atmf_uni.h mib.c mib.h \
-- sysgroup.c sysgroup.h ilmid.c
-+ilmid_SOURCES = rfc1157_snmp.c rfc1157_snmp.h rfc1155_smi.c rfc1155_smi.h util.c util.h io.c io.h message.c message.h atmf_uni.c atmf_uni.h mib.c mib.h sysgroup.c sysgroup.h ilmid.c
-
--ilmid_LDADD = $(top_builddir)/src/lib/libatm.la \
-- $(top_builddir)/src/ilmid/asn1/libasn1.a
-+ilmid_LDADD = $(top_builddir)/src/lib/libatm.la $(top_builddir)/src/ilmid/asn1/libasn1.a
-
- ilmid_DEPENDENCIES = $(ilmid_LDADD)
-
-@@ -127,8 +123,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/atmf_uni.P .deps/ilmid.P .deps/io.P .deps/message.P \
-+.deps/mib.P .deps/rfc1155_smi.P .deps/rfc1157_snmp.P .deps/sysgroup.P \
-+.deps/util.P
- SOURCES = $(ilmid_SOURCES)
- OBJECTS = $(ilmid_OBJECTS)
-
-@@ -136,9 +135,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/ilmid/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/ilmid/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -168,9 +167,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -193,9 +189,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -294,7 +287,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -310,6 +303,11 @@
- subdir = src/ilmid
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/ilmid/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -330,62 +328,38 @@
- || exit 1; \
- fi; \
- done
--atmf_uni.o: atmf_uni.c ../../config.h atmf_uni.h asn1/asn_incl.h \
-- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
-- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
-- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
-- rfc1155_smi.h rfc1157_snmp.h mib.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h util.h
--ilmid.o: ilmid.c ../../config.h asn1/asn_incl.h asn1/asn_config.h \
-- asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h asn1/asn_len.h \
-- asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h \
-- asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h \
-- rfc1157_snmp.h message.h util.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h io.h mib.h \
-- atmf_uni.h sysgroup.h
--io.o: io.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h io.h asn1/asn_incl.h asn1/asn_config.h \
-- asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h asn1/asn_len.h \
-- asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h \
-- asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h \
-- rfc1157_snmp.h ../../src/include/atmd.h atmf_uni.h mib.h
--message.o: message.c ../../config.h message.h asn1/asn_incl.h \
-- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
-- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
-- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
-- rfc1155_smi.h rfc1157_snmp.h atmf_uni.h mib.h \
-- ../../src/include/atmd.h ../../src/include/stdint.h \
-- ../../src/include/atm.h util.h
--mib.o: mib.c ../../config.h mib.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h \
-- asn1/asn_incl.h asn1/asn_config.h asn1/nibble_alloc.h \
-- asn1/sbuf.h asn1/print.h asn1/asn_len.h asn1/asn_tag.h \
-- asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h asn1/asn_oid.h \
-- asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h rfc1157_snmp.h \
-- sysgroup.h atmf_uni.h util.h
--rfc1155_smi.o: rfc1155_smi.c ../../config.h asn1/asn_incl.h \
-- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
-- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
-- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
-- rfc1155_smi.h rfc1157_snmp.h
--rfc1157_snmp.o: rfc1157_snmp.c ../../config.h asn1/asn_incl.h \
-- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
-- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
-- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
-- rfc1155_smi.h rfc1157_snmp.h
--sysgroup.o: sysgroup.c ../../config.h sysgroup.h asn1/asn_incl.h \
-- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
-- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
-- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
-- rfc1155_smi.h rfc1157_snmp.h mib.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h
--util.o: util.c ../../config.h util.h asn1/asn_incl.h asn1/asn_config.h \
-- asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h asn1/asn_len.h \
-- asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h \
-- asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h \
-- rfc1157_snmp.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-recursive
- dvi-am:
-@@ -424,27 +398,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-recursive
-
- clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-recursive
-
- distclean-am: distclean-sbinPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-recursive
-
- maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -460,12 +434,14 @@
- all-recursive check-recursive installcheck-recursive info-recursive \
- dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
- maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs-am \
--installdirs mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/ilmid/io.c
-+++ linux-atm-2.4.1/src/ilmid/io.c
-@@ -32,6 +32,7 @@
- #include <net/if.h>
- #include <atm.h>
- #include <linux/atmdev.h>
-+#include <unistd.h>
- #include "io.h"
- #include "atmd.h"
- #include "atmf_uni.h"
-@@ -299,4 +300,5 @@
- diag(COMPONENT,DIAG_ERROR,"ioctl ATM_GETCIRANGE: %s",strerror(errno));
- return error;
- }
-+ return 0;
- }
---- linux-atm-2.4.1.orig/src/ilmid/atmf_uni.c
-+++ linux-atm-2.4.1/src/ilmid/atmf_uni.c
-@@ -187,7 +187,7 @@
- newPrefix->name = alloc_t(AsnOid);
- newPrefix->name->octs = alloc(varBindName->octetLen);
- AsnOidCopy(newPrefix->name, varBindName);
-- Q_INSERT_BEFORE((NetPrefixNode *) var->value, newPrefix, prefix);
-+ Q_INSERT_BEFORE_TYPED(var->value,(NetPrefixNode *), newPrefix, prefix);
- if(atmNetPrefix.octs == NULL)
- {
- atmNetPrefix.octetLen = varBindName->octetLen - NETPREFIX_LEN - 2;
-@@ -197,7 +197,7 @@
- }
- else if (varbind->value->a.simple->a.number == INVALID && cmp == AsnOidEqual)
- {
-- Q_REMOVE((NetPrefixNode *) var->value, prefix);
-+ Q_REMOVE(var->value, prefix);
- }
-
- return NOERROR;
---- linux-atm-2.4.1.orig/src/ilmid/mib.c
-+++ linux-atm-2.4.1/src/ilmid/mib.c
-@@ -58,13 +58,13 @@
- { NULL }
- };
-
--void MIBget(VarBindList *list, PDUInt *status, AsnInt *index)
-+void MIBget(VarBindList *list, PDUInt *status, AsnInt *Mindex)
- {
- VarBind *varbind;
- Variable *var;
- AsnOidResult result;
-
-- *index = 1;
-+ *Mindex = 1;
- FOR_EACH_LIST_ELMT(varbind, list)
- {
- /* Find the first MIB object not lexigraphically less than the *
-@@ -91,20 +91,20 @@
- if(*status != NOERROR)
- return;
-
-- (*index)++;
-+ (*Mindex)++;
- }
-- *index = 0;
-+ *Mindex = 0;
- return;
- }
-
-
--void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *index)
-+void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *Mindex)
- {
- VarBind *varbind;
- Variable *var;
- AsnOidResult result;
-
-- *index = 1;
-+ *Mindex = 1;
- FOR_EACH_LIST_ELMT(varbind, list)
- {
- /* Find the first complex MIB object not lexigraphically less than *
-@@ -139,19 +139,19 @@
- if(*status != NOERROR)
- return;
-
-- (*index)++;
-+ (*Mindex)++;
- }
-- *index = 0;
-+ *Mindex = 0;
- return;
- }
-
--void MIBset(VarBindList *list, PDUInt *status, AsnInt *index)
-+void MIBset(VarBindList *list, PDUInt *status, AsnInt *Mindex)
- {
- VarBind *varbind;
- Variable *var;
- AsnOidResult result;
-
-- *index = 1;
-+ *Mindex = 1;
- FOR_EACH_LIST_ELMT(varbind, list)
- {
- /* Find the first MIB object not lexigraphically less than the *
-@@ -182,9 +182,9 @@
- if(*status != NOERROR)
- return;
-
-- (*index)++;
-+ (*Mindex)++;
- }
-- *index = 0;
-+ *Mindex = 0;
- return;
- }
-
---- linux-atm-2.4.1.orig/src/ilmid/mib.h
-+++ linux-atm-2.4.1/src/ilmid/mib.h
-@@ -39,9 +39,9 @@
- void *value;
- } Variable;
-
--void MIBget(VarBindList *list, PDUInt *status, AsnInt *index);
--void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *index);
--void MIBset(VarBindList *list, PDUInt *status, AsnInt *index);
-+void MIBget(VarBindList *list, PDUInt *status, AsnInt *Mindex);
-+void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *Mindex);
-+void MIBset(VarBindList *list, PDUInt *status, AsnInt *Mindex);
- void *MIBdelete(AsnOid *oid);
-
- AsnInt getString(VarBind *varbind, Variable *var);
---- linux-atm-2.4.1.orig/src/ilmid/ilmid.c
-+++ linux-atm-2.4.1/src/ilmid/ilmid.c
-@@ -33,6 +33,7 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
- #include <unistd.h>
- #include <sys/time.h>
- #include <errno.h>
---- linux-atm-2.4.1.orig/src/ilmid/asn1/Makefile.in
-+++ linux-atm-2.4.1/src/ilmid/asn1/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -87,13 +87,7 @@
-
- noinst_LIBRARIES = libasn1.a
-
--libasn1_a_SOURCES = asn_len.c asn_len.h asn_tag.c asn_tag.h \
-- asn_int.c asn_int.h asn_octs.c asn_octs.h \
-- asn_bits.c asn_bits.h str_stk.c str_stk.h \
-- asn_oid.c asn_oid.h asn_null.c asn_null.h \
-- asn_list.c asn_list.h nibble_alloc.c nibble_alloc.h \
-- print.c print.h \
-- asn_config.h min_buf.h sbuf.h exp_buf.h
-+libasn1_a_SOURCES = asn_len.c asn_len.h asn_tag.c asn_tag.h asn_int.c asn_int.h asn_octs.c asn_octs.h asn_bits.c asn_bits.h str_stk.c str_stk.h asn_oid.c asn_oid.h asn_null.c asn_null.h asn_list.c asn_list.h nibble_alloc.c nibble_alloc.h print.c print.h asn_config.h min_buf.h sbuf.h exp_buf.h
-
-
- EXTRA_libasn1_a_SOURCES = asn_incl.h exp_buf.c
-@@ -125,8 +119,12 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/asn_bits.P .deps/asn_int.P .deps/asn_len.P \
-+.deps/asn_list.P .deps/asn_null.P .deps/asn_octs.P .deps/asn_oid.P \
-+.deps/asn_tag.P .deps/exp_buf.P .deps/nibble_alloc.P .deps/print.P \
-+.deps/str_stk.P
- SOURCES = $(libasn1_a_SOURCES) $(EXTRA_libasn1_a_SOURCES)
- OBJECTS = $(libasn1_a_OBJECTS)
-
-@@ -134,9 +132,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/ilmid/asn1/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/ilmid/asn1/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -150,9 +148,6 @@
-
- maintainer-clean-noinstLIBRARIES:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -175,9 +170,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -217,7 +209,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -233,6 +225,11 @@
- subdir = src/ilmid/asn1
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/ilmid/asn1/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -243,30 +240,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--asn_bits.o: asn_bits.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h asn_tag.h str_stk.h asn_bits.h
--asn_int.o: asn_int.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h asn_tag.h asn_int.h
--asn_len.o: asn_len.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h
--asn_list.o: asn_list.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_list.h
--asn_null.o: asn_null.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h asn_tag.h asn_null.h
--asn_octs.o: asn_octs.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h asn_tag.h str_stk.h asn_bits.h \
-- asn_octs.h
--asn_oid.o: asn_oid.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h asn_tag.h asn_octs.h asn_oid.h
--asn_tag.o: asn_tag.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h asn_len.h asn_tag.h
--nibble_alloc.o: nibble_alloc.c ../../../config.h asn_config.h \
-- nibble_alloc.h sbuf.h print.h
--print.o: print.c ../../../config.h asn_config.h nibble_alloc.h sbuf.h \
-- print.h
--str_stk.o: str_stk.c ../../../config.h asn_config.h nibble_alloc.h \
-- sbuf.h print.h str_stk.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -303,27 +308,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-noinstLIBRARIES distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -334,12 +339,14 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_int.c
-+++ linux-atm-2.4.1/src/ilmid/asn1/asn_int.c
-@@ -185,7 +185,7 @@
- AsnInt* v _AND_
- unsigned short int indent)
- {
-- fprintf(f,"%d", *v);
-+ fprintf(f,"%ld", *v);
- }
-
-
-@@ -252,7 +252,6 @@
- UAsnInt* data)
- {
- int len;
-- int retLen;
- int i;
- unsigned long int mask;
- unsigned long int dataCpy;
-@@ -370,5 +369,5 @@
- UAsnInt* v _AND_
- unsigned short int indent)
- {
-- fprintf(f,"%u", *v);
-+ fprintf(f,"%lu", *v);
- }
---- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_octs.c
-+++ linux-atm-2.4.1/src/ilmid/asn1/asn_octs.c
-@@ -21,6 +21,9 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
-+#include <string.h>
-+
- #include "asn_config.h"
- #include "asn_len.h"
- #include "asn_tag.h"
---- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_bits.c
-+++ linux-atm-2.4.1/src/ilmid/asn1/asn_bits.c
-@@ -21,6 +21,9 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
-+#include <string.h>
-+
- #include "asn_config.h"
- #include "asn_len.h"
- #include "asn_tag.h"
---- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_oid.c
-+++ linux-atm-2.4.1/src/ilmid/asn1/asn_oid.c
-@@ -21,6 +21,9 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
-+#include <string.h>
-+
- #include "asn_config.h"
- #include "asn_len.h"
- #include "asn_tag.h"
-@@ -125,7 +128,7 @@
- if (firstArcNum > 2)
- firstArcNum = 2;
-
-- fprintf(f,"%u %u", firstArcNum, arcNum - (firstArcNum * 40));
-+ fprintf(f,"%d %lu", firstArcNum, arcNum - (firstArcNum * 40));
-
- for (; i < v->octetLen ; )
- {
-@@ -134,7 +137,7 @@
-
- arcNum = (arcNum << 7) + (v->octs[i] & 0x7f);
- i++;
-- fprintf(f," %u", arcNum);
-+ fprintf(f," %lu", arcNum);
- }
- fprintf(f,"}");
-
---- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_list.c
-+++ linux-atm-2.4.1/src/ilmid/asn1/asn_list.c
-@@ -20,6 +20,8 @@
- #include <config.h>
- #endif
-
-+#include <stdlib.h>
-+
- #include "asn_config.h"
- #include "asn_list.h"
-
---- linux-atm-2.4.1.orig/src/ilmid/asn1/nibble_alloc.c
-+++ linux-atm-2.4.1/src/ilmid/asn1/nibble_alloc.c
-@@ -20,7 +20,9 @@
- #include <config.h>
- #endif
-
-+#include <string.h>
- #include <memory.h>
-+#include <stdlib.h>
- #include "asn_config.h"
- #include "nibble_alloc.h"
-
---- linux-atm-2.4.1.orig/src/ilmid/asn1/nibble_alloc.h
-+++ linux-atm-2.4.1/src/ilmid/asn1/nibble_alloc.h
-@@ -39,13 +39,13 @@
- void InitNibbleMem PROTO((unsigned long int initialSize,
- unsigned long int incrementSize));
-
--void ShutdownNibbleMem();
-+void ShutdownNibbleMem(void);
-
- void ServiceNibbleFault PROTO((unsigned long int size));
-
- void* NibbleAlloc PROTO((unsigned long int size));
-
--void ResetNibbleMem();
-+void ResetNibbleMem(void);
-
-
- #endif /* conditional include */
---- linux-atm-2.4.1.orig/src/man/Makefile.in
-+++ linux-atm-2.4.1/src/man/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -100,14 +100,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/man/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/man/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -159,6 +159,11 @@
- subdir = src/man
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/man/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/led/Makefile.in
-+++ linux-atm-2.4.1/src/led/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -87,9 +87,7 @@
-
- sbin_PROGRAMS = zeppelin
-
--zeppelin_SOURCES = join.c join.h conn.c conn.h main.c address.c address.h \
-- frames.c frames.h display.c display.h \
-- kernel.c kernel.h frame_defs.h lec.h
-+zeppelin_SOURCES = join.c join.h conn.c conn.h main.c address.c address.h frames.c frames.h display.c display.h kernel.c kernel.h frame_defs.h lec.h
-
- zeppelin_LDADD = $(top_builddir)/src/lib/libatm.la
- zeppelin_DEPENDENCIES = $(zeppelin_LDADD)
-@@ -125,8 +123,10 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/address.P .deps/conn.P .deps/display.P .deps/frames.P \
-+.deps/join.P .deps/kernel.P .deps/main.P
- SOURCES = $(zeppelin_SOURCES)
- OBJECTS = $(zeppelin_OBJECTS)
-
-@@ -134,9 +134,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/led/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/led/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -166,9 +166,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -191,9 +188,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -271,7 +265,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -287,6 +281,11 @@
- subdir = src/led
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/led/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -297,28 +296,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--address.o: address.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h address.h
--conn.o: conn.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmsap.h \
-- ../../src/include/atmd.h conn.h display.h lec.h frames.h \
-- frame_defs.h kernel.h
--display.o: display.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h display.h \
-- frame_defs.h
--frames.o: frames.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h conn.h \
-- lec.h frames.h frame_defs.h display.h kernel.h
--join.o: join.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h conn.h \
-- lec.h join.h frames.h frame_defs.h display.h
--kernel.o: kernel.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h kernel.h \
-- lec.h conn.h frames.h frame_defs.h
--main.o: main.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h join.h \
-- lec.h conn.h address.h display.h kernel.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -356,27 +365,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-sbinPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -388,12 +397,14 @@
- clean-compile maintainer-clean-compile mostlyclean-libtool \
- distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
- uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/lane/Makefile.in
-+++ linux-atm-2.4.1/src/lane/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -89,14 +89,11 @@
-
- LDADD = $(top_builddir)/src/lib/libatm.la
-
--LES_BUS_SRCS = mem.c mem.h load.c load.h units.c units.h load_lex.l load_lex.h \
-- timers.c timers.h dump.c dump.h lane_atm.c lane_atm.h \
-- events.c events.h lane.c lane.h
-+LES_BUS_SRCS = mem.c mem.h load.c load.h units.c units.h load_lex.l load_lex.h timers.c timers.h dump.c dump.h lane_atm.c lane_atm.h events.c events.h lane.c lane.h
-
- les_SOURCES = $(LES_BUS_SRCS) packet.c packet.h connect.c connect.h db.c db.h
- bus_SOURCES = $(LES_BUS_SRCS) connect_bus.c
--lecs_SOURCES = lecs_db.l lecs_db.h lecs_load.c lecs_load.h lecs.c lecs.h \
-- ldb.c ldb.h mem_lecs.c mem_lecs.h atm_lecs.c atm_lecs.h
-+lecs_SOURCES = lecs_db.l lecs_db.h lecs_load.c lecs_load.h lecs.c lecs.h ldb.c ldb.h mem_lecs.c mem_lecs.h atm_lecs.c atm_lecs.h
-
-
- man_MANS = les.8 lecs.8 bus.8
-@@ -148,8 +145,13 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/atm_lecs.P .deps/connect.P .deps/connect_bus.P \
-+.deps/db.P .deps/dump.P .deps/events.P .deps/lane.P .deps/lane_atm.P \
-+.deps/ldb.P .deps/lecs.P .deps/lecs_db.P .deps/lecs_load.P .deps/load.P \
-+.deps/load_lex.P .deps/mem.P .deps/mem_lecs.P .deps/packet.P \
-+.deps/timers.P .deps/units.P
- SOURCES = $(les_SOURCES) $(bus_SOURCES) $(lecs_SOURCES)
- OBJECTS = $(les_OBJECTS) $(bus_OBJECTS) $(lecs_OBJECTS)
-
-@@ -157,9 +159,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .l .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/lane/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lane/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -189,9 +191,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -214,9 +213,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -304,7 +300,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -320,6 +316,11 @@
- subdir = src/lane
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/lane/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -330,62 +331,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--atm_lecs.o: atm_lecs.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmsap.h \
-- atm_lecs.h
--connect.o: connect.c ../../config.h ../../src/include/stdint.h mem.h \
-- units.h lane.h dump.h ../../src/include/atm.h \
-- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
-- db.h packet.h lane_atm.h
--connect_bus.o: connect_bus.c ../../config.h ../../src/include/stdint.h \
-- mem.h units.h lane.h dump.h ../../src/include/atm.h \
-- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
-- lane_atm.h
--db.o: db.c ../../config.h ../../src/include/stdint.h mem.h units.h \
-- lane.h dump.h ../../src/include/atm.h \
-- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
-- db.h
--dump.o: dump.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmsap.h dump.h \
-- units.h lane.h load.h
--events.o: events.c ../../config.h events.h units.h load.h lane.h dump.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h mem.h timers.h connect.h
--lane.o: lane.c ../../config.h units.h load.h lane.h dump.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h mem.h connect.h timers.h events.h
--lane_atm.o: lane_atm.c ../../config.h lane_atm.h units.h lane.h \
-- connect.h timers.h load.h events.h ../../src/include/atmsap.h \
-- ../../src/include/stdint.h dump.h ../../src/include/atm.h mem.h
--ldb.o: ldb.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h lecs.h ldb.h mem_lecs.h
--lecs.o: lecs.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h lecs_load.h ldb.h mem_lecs.h lecs.h \
-- atm_lecs.h
--lecs_db.o: lecs_db.c ../../config.h lecs_load.h lecs_db.h
--lecs_load.o: lecs_load.c ../../config.h lecs_load.h lecs_db.h ldb.h \
-- lecs.h
--load.o: load.c ../../config.h load.h units.h lane.h dump.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h mem.h load_lex.h
--load_lex.o: load_lex.c ../../config.h ../../src/include/stdint.h \
-- load_lex.h lane.h units.h load.h mem.h
--mem.o: mem.c ../../config.h mem.h units.h dump.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmsap.h lane.h \
-- load.h
--mem_lecs.o: mem_lecs.c ../../config.h mem_lecs.h
--packet.o: packet.c ../../config.h ../../src/include/stdint.h mem.h \
-- units.h lane.h dump.h ../../src/include/atm.h \
-- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
-- db.h packet.h
--timers.o: timers.c ../../config.h timers.h units.h load.h lane.h dump.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h mem.h
--units.o: units.c ../../config.h units.h mem.h lane.h load.h dump.h \
-- ../../src/include/atm.h ../../src/include/stdint.h \
-- ../../src/include/atmsap.h connect.h timers.h events.h \
-- lane_atm.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -422,29 +399,29 @@
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
- maintainer-clean-generic:
-- -test -z "lecs_dblload_lexl" || rm -f lecs_dbl load_lexl
-+ -test -z "lecs_dbcload_lexc" || rm -f lecs_dbc load_lexc
- mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-sbinPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -456,12 +433,14 @@
- clean-compile maintainer-clean-compile mostlyclean-libtool \
- distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
- uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/mpoad/Makefile.in
-+++ linux-atm-2.4.1/src/mpoad/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -89,9 +89,7 @@
-
- LDADD = $(top_builddir)/src/lib/libatm.la
-
--mpcd_SOURCES = get_vars.c get_vars.h io.c io.h k_interf.c k_interf.h main.c \
-- p_factory.c p_recogn.c id_list.c tag_list.c \
-- poll2select.c poll2select.h lecs.c lecs.h packets.h
-+mpcd_SOURCES = get_vars.c get_vars.h io.c io.h k_interf.c k_interf.h main.c p_factory.c p_recogn.c id_list.c tag_list.c poll2select.c poll2select.h lecs.c lecs.h packets.h
-
-
- man_MANS = mpcd.8
-@@ -128,8 +126,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/get_vars.P .deps/id_list.P .deps/io.P \
-+.deps/k_interf.P .deps/lecs.P .deps/main.P .deps/p_factory.P \
-+.deps/p_recogn.P .deps/poll2select.P .deps/tag_list.P
- SOURCES = $(mpcd_SOURCES)
- OBJECTS = $(mpcd_OBJECTS)
-
-@@ -137,9 +138,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/mpoad/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/mpoad/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -169,9 +170,6 @@
- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -194,9 +192,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -274,7 +269,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -290,6 +285,11 @@
- subdir = src/mpoad
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/mpoad/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -300,29 +300,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--get_vars.o: get_vars.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h packets.h get_vars.h io.h
--id_list.o: id_list.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h packets.h
--io.o: io.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h packets.h k_interf.h io.h get_vars.h \
-- poll2select.h
--k_interf.o: k_interf.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h k_interf.h packets.h io.h get_vars.h
--lecs.o: lecs.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h ../../src/include/atmsap.h lecs.h \
-- k_interf.h
--main.o: main.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h packets.h io.h k_interf.h get_vars.h \
-- lecs.h
--p_factory.o: p_factory.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atm.h packets.h get_vars.h io.h
--p_recogn.o: p_recogn.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h io.h k_interf.h packets.h
--poll2select.o: poll2select.c ../../config.h
--tag_list.o: tag_list.c ../../config.h packets.h ../../src/include/atm.h \
-- ../../src/include/stdint.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -360,27 +369,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-sbinPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -392,12 +401,14 @@
- clean-compile maintainer-clean-compile mostlyclean-libtool \
- distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
- uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/mpoad/p_factory.c
-+++ linux-atm-2.4.1/src/mpoad/p_factory.c
-@@ -34,7 +34,7 @@
-
- while( count > 1 ) {
- /* This is the inner loop */
-- sum += * ((uint16_t *) addr)++;
-+ sum += * ((uint16_t *) addr); addr += sizeof(uint16_t);
- count -= 2;
- }
-
---- linux-atm-2.4.1.orig/src/switch/Makefile.in
-+++ linux-atm-2.4.1/src/switch/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -92,11 +92,9 @@
-
- swc_SOURCES = swc.c swc.h
- swc_LDADD = $(top_builddir)/src/lib/libatm.la
--swc_DEPENDENCIES = $(swc_LDADD) $(top_builddir)/src/include/atm.h \
-- $(top_builddir)/src/include/atmd.h
-+swc_DEPENDENCIES = $(swc_LDADD) $(top_builddir)/src/include/atm.h $(top_builddir)/src/include/atmd.h
-
--libsw_a_SOURCES = control.c dispatch.c dispatch.h proto.c proto.h relay.c \
-- route.c route.h sig.c sig.h cfg_y.y cfg_l.l fab.h
-+libsw_a_SOURCES = control.c dispatch.c dispatch.h proto.c proto.h relay.c route.c route.h sig.c sig.h cfg_y.y cfg_l.l fab.h
-
-
- EXTRA_DIST = cfg_y.h README
-@@ -132,8 +130,11 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/cfg_l.P .deps/cfg_y.P .deps/control.P \
-+.deps/dispatch.P .deps/proto.P .deps/relay.P .deps/route.P .deps/sig.P \
-+.deps/swc.P
- SOURCES = $(libsw_a_SOURCES) $(swc_SOURCES)
- OBJECTS = $(libsw_a_OBJECTS) $(swc_OBJECTS)
-
-@@ -141,9 +142,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .l .lo .o .obj .s .y
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/switch/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/switch/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -157,9 +158,6 @@
-
- maintainer-clean-noinstLIBRARIES:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -182,9 +180,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -306,7 +301,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -322,6 +317,11 @@
- subdir = src/switch
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/switch/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -342,32 +342,38 @@
- || exit 1; \
- fi; \
- done
--cfg_l.o: cfg_l.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h cfg_y.h
--cfg_y.o: cfg_y.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h fab.h proto.h \
-- ../../src/include/atmsap.h ../../src/include/atmd.h sig.h \
-- route.h swc.h
--control.o: control.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h fab.h \
-- proto.h ../../src/include/atmsap.h sig.h dispatch.h swc.h
--dispatch.o: dispatch.c ../../config.h ../../src/include/atmd.h \
-- ../../src/include/stdint.h ../../src/include/atm.h dispatch.h
--proto.o: proto.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h sig.h fab.h \
-- proto.h ../../src/include/atmsap.h
--relay.o: relay.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h fab.h \
-- proto.h ../../src/include/atmsap.h sig.h dispatch.h route.h
--route.o: route.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h route.h \
-- sig.h
--sig.o: sig.c ../../config.h ../../src/include/stdint.h \
-- ../../src/include/atmd.h ../../src/include/atm.h dispatch.h \
-- proto.h ../../src/include/atmsap.h sig.h route.h fab.h
--swc.o: swc.c ../../config.h ../../src/include/atm.h \
-- ../../src/include/stdint.h ../../src/include/atmd.h swc.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-recursive
- dvi-am:
-@@ -404,22 +410,23 @@
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
- maintainer-clean-generic:
-- -test -z "cfg_llcfg_yhcfg_yc" || rm -f cfg_ll cfg_yh cfg_yc
-+ -test -z "cfg_lccfg_yhcfg_yc" || rm -f cfg_lc cfg_yh cfg_yc
- mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
- mostlyclean-libtool mostlyclean-noinstPROGRAMS \
-- mostlyclean-tags mostlyclean-generic
-+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
-
- mostlyclean: mostlyclean-recursive
-
- clean-am: clean-noinstLIBRARIES clean-compile clean-libtool \
-- clean-noinstPROGRAMS clean-tags clean-generic \
-- mostlyclean-am
-+ clean-noinstPROGRAMS clean-tags clean-depend \
-+ clean-generic mostlyclean-am
-
- clean: clean-recursive
-
- distclean-am: distclean-noinstLIBRARIES distclean-compile \
- distclean-libtool distclean-noinstPROGRAMS \
-- distclean-tags distclean-generic clean-am
-+ distclean-tags distclean-depend distclean-generic \
-+ clean-am
- -rm -f libtool
-
- distclean: distclean-recursive
-@@ -427,7 +434,8 @@
- maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
- maintainer-clean-compile maintainer-clean-libtool \
- maintainer-clean-noinstPROGRAMS maintainer-clean-tags \
-- maintainer-clean-generic distclean-am
-+ maintainer-clean-depend maintainer-clean-generic \
-+ distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -445,12 +453,14 @@
- all-recursive check-recursive installcheck-recursive info-recursive \
- dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
- maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs-am \
--installdirs mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/switch/cfg_y.c
-+++ linux-atm-2.4.1/src/switch/cfg_y.c
-@@ -1,21 +1,87 @@
-+/* A Bison parser, made by GNU Bison 1.875d. */
-
--/* A Bison parser, made from cfg_y.y
-- by GNU Bison version 1.28 */
-+/* Skeleton parser for Yacc-like parsing with Bison,
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-
--#define YYBISON 1 /* Identify Bison output. */
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* Written by Richard Stallman by simplifying the original so called
-+ ``semantic'' parser. */
-+
-+/* All symbols defined below should begin with yy or YY, to avoid
-+ infringing on user name space. This should be done even for local
-+ variables, as they might otherwise be expanded by user macros.
-+ There are some unavoidable exceptions within include files to
-+ define necessary library symbols; they are noted "INFRINGES ON
-+ USER NAME SPACE" below. */
-+
-+/* Identify Bison output. */
-+#define YYBISON 1
-+
-+/* Skeleton name. */
-+#define YYSKELETON_NAME "yacc.c"
-+
-+/* Pure parsers. */
-+#define YYPURE 0
-+
-+/* Using locations. */
-+#define YYLSP_NEEDED 0
-
--#define TOK_COMMAND 257
--#define TOK_VPCI 258
--#define TOK_ITF 259
--#define TOK_DEFAULT 260
--#define TOK_ROUTE 261
--#define TOK_STR 262
--#define TOK_SOCKET 263
--#define TOK_OPTION 264
--#define TOK_CONTROL 265
--#define TOK_NUM 266
--#define TOK_PVC 267
-
-+
-+/* Tokens. */
-+#ifndef YYTOKENTYPE
-+# define YYTOKENTYPE
-+ /* Put the tokens into the symbol table, so that GDB and other debuggers
-+ know about them. */
-+ enum yytokentype {
-+ TOK_COMMAND = 258,
-+ TOK_VPCI = 259,
-+ TOK_ITF = 260,
-+ TOK_DEFAULT = 261,
-+ TOK_ROUTE = 262,
-+ TOK_STR = 263,
-+ TOK_SOCKET = 264,
-+ TOK_OPTION = 265,
-+ TOK_CONTROL = 266,
-+ TOK_NUM = 267,
-+ TOK_PVC = 268
-+ };
-+#endif
-+#define TOK_COMMAND 258
-+#define TOK_VPCI 259
-+#define TOK_ITF 260
-+#define TOK_DEFAULT 261
-+#define TOK_ROUTE 262
-+#define TOK_STR 263
-+#define TOK_SOCKET 264
-+#define TOK_OPTION 265
-+#define TOK_CONTROL 266
-+#define TOK_NUM 267
-+#define TOK_PVC 268
-+
-+
-+
-+
-+/* Copy the first part of user declarations. */
- #line 1 "cfg_y.y"
-
- /* cfg.y - switch configuration language */
-@@ -29,6 +95,7 @@
- #include <string.h>
- #include <errno.h>
- #include <limits.h>
-+#include <stdlib.h>
-
- #include "atm.h"
-
-@@ -38,436 +105,743 @@
- #include "swc.h"
-
-
-+extern void yyerror(const char *s);
-+
- static int itf;
- static SIGNALING_ENTITY *sig;
-
-
--#line 27 "cfg_y.y"
--typedef union {
-+
-+/* Enabling traces. */
-+#ifndef YYDEBUG
-+# define YYDEBUG 0
-+#endif
-+
-+/* Enabling verbose error messages. */
-+#ifdef YYERROR_VERBOSE
-+# undef YYERROR_VERBOSE
-+# define YYERROR_VERBOSE 1
-+#else
-+# define YYERROR_VERBOSE 0
-+#endif
-+
-+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
-+#line 30 "cfg_y.y"
-+typedef union YYSTYPE {
- int num;
- char *str;
- struct sockaddr_atmpvc pvc;
- } YYSTYPE;
--#include <stdio.h>
--
--#ifndef __cplusplus
--#ifndef __STDC__
--#define const
--#endif
-+/* Line 191 of yacc.c. */
-+#line 137 "y.tab.c"
-+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-+# define YYSTYPE_IS_DECLARED 1
-+# define YYSTYPE_IS_TRIVIAL 1
- #endif
-
-
-
--#define YYFINAL 31
--#define YYFLAG -32768
--#define YYNTBASE 16
--
--#define YYTRANSLATE(x) ((unsigned)(x) <= 267 ? yytranslate[x] : 27)
--
--static const char yytranslate[] = { 0,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 14, 2, 15, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-- 2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
-- 7, 8, 9, 10, 11, 12, 13
--};
--
--#if YYDEBUG != 0
--static const short yyprhs[] = { 0,
-- 0, 1, 4, 7, 10, 13, 14, 15, 25, 26,
-- 29, 30, 33, 34, 36, 37, 40, 41, 45
--};
-+/* Copy the second part of user declarations. */
-+
-+
-+/* Line 214 of yacc.c. */
-+#line 149 "y.tab.c"
-+
-+#if ! defined (yyoverflow) || YYERROR_VERBOSE
-+
-+# ifndef YYFREE
-+# define YYFREE free
-+# endif
-+# ifndef YYMALLOC
-+# define YYMALLOC malloc
-+# endif
-+
-+/* The parser invokes alloca or malloc; define the necessary symbols. */
-+
-+# ifdef YYSTACK_USE_ALLOCA
-+# if YYSTACK_USE_ALLOCA
-+# define YYSTACK_ALLOC alloca
-+# endif
-+# else
-+# if defined (alloca) || defined (_ALLOCA_H)
-+# define YYSTACK_ALLOC alloca
-+# else
-+# ifdef __GNUC__
-+# define YYSTACK_ALLOC __builtin_alloca
-+# endif
-+# endif
-+# endif
-+
-+# ifdef YYSTACK_ALLOC
-+ /* Pacify GCC's `empty if-body' warning. */
-+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
-+# else
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+# define YYSTACK_ALLOC YYMALLOC
-+# define YYSTACK_FREE YYFREE
-+# endif
-+#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
-+
-+
-+#if (! defined (yyoverflow) \
-+ && (! defined (__cplusplus) \
-+ || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
-
--static const short yyrhs[] = { -1,
-- 17, 16, 0, 18, 16, 0, 11, 16, 0, 10,
-- 8, 0, 0, 0, 21, 9, 14, 19, 22, 20,
-- 23, 24, 15, 0, 0, 3, 8, 0, 0, 5,
-- 12, 0, 0, 13, 0, 0, 26, 24, 0, 0,
-- 6, 25, 24, 0, 7, 0
--};
-+/* A type that is properly aligned for any stack member. */
-+union yyalloc
-+{
-+ short int yyss;
-+ YYSTYPE yyvs;
-+ };
-+
-+/* The size of the maximum gap between one aligned stack and the next. */
-+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-+
-+/* The size of an array large to enough to hold all stacks, each with
-+ N elements. */
-+# define YYSTACK_BYTES(N) \
-+ ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \
-+ + YYSTACK_GAP_MAXIMUM)
-+
-+/* Copy COUNT objects from FROM to TO. The source and destination do
-+ not overlap. */
-+# ifndef YYCOPY
-+# if defined (__GNUC__) && 1 < __GNUC__
-+# define YYCOPY(To, From, Count) \
-+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-+# else
-+# define YYCOPY(To, From, Count) \
-+ do \
-+ { \
-+ register YYSIZE_T yyi; \
-+ for (yyi = 0; yyi < (Count); yyi++) \
-+ (To)[yyi] = (From)[yyi]; \
-+ } \
-+ while (0)
-+# endif
-+# endif
-+
-+/* Relocate STACK from its old location to the new one. The
-+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
-+ elements in the stack, and YYPTR gives the new location of the
-+ stack. Advance YYPTR to a properly aligned location for the next
-+ stack. */
-+# define YYSTACK_RELOCATE(Stack) \
-+ do \
-+ { \
-+ YYSIZE_T yynewbytes; \
-+ YYCOPY (&yyptr->Stack, Stack, yysize); \
-+ Stack = &yyptr->Stack; \
-+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
-+ yyptr += yynewbytes / sizeof (*yyptr); \
-+ } \
-+ while (0)
-
- #endif
-
--#if YYDEBUG != 0
--static const short yyrline[] = { 0,
-- 43, 44, 45, 46, 52, 59, 65, 73, 76, 80,
-- 87, 88, 94, 95, 101, 102, 103, 108, 110
--};
-+#if defined (__STDC__) || defined (__cplusplus)
-+ typedef signed char yysigned_char;
-+#else
-+ typedef short int yysigned_char;
- #endif
-
-+/* YYFINAL -- State number of the termination state. */
-+#define YYFINAL 11
-+/* YYLAST -- Last index in YYTABLE. */
-+#define YYLAST 22
-+
-+/* YYNTOKENS -- Number of terminals. */
-+#define YYNTOKENS 16
-+/* YYNNTS -- Number of nonterminals. */
-+#define YYNNTS 12
-+/* YYNRULES -- Number of rules. */
-+#define YYNRULES 20
-+/* YYNRULES -- Number of states. */
-+#define YYNSTATES 31
-+
-+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-+#define YYUNDEFTOK 2
-+#define YYMAXUTOK 268
-
--#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
-+#define YYTRANSLATE(YYX) \
-+ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
--static const char * const yytname[] = { "$","error","$undefined.","TOK_COMMAND",
--"TOK_VPCI","TOK_ITF","TOK_DEFAULT","TOK_ROUTE","TOK_STR","TOK_SOCKET","TOK_OPTION",
--"TOK_CONTROL","TOK_NUM","TOK_PVC","'{'","'}'","all","option","sig","@1","@2",
--"opt_command","opt_itf","opt_via","routes","@3","route", NULL
-+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-+static const unsigned char yytranslate[] =
-+{
-+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 14, 2, 15, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
-+ 5, 6, 7, 8, 9, 10, 11, 12, 13
- };
--#endif
-
--static const short yyr1[] = { 0,
-- 16, 16, 16, 16, 17, 19, 20, 18, 21, 21,
-- 22, 22, 23, 23, 24, 24, 25, 24, 26
-+#if YYDEBUG
-+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
-+ YYRHS. */
-+static const unsigned char yyprhs[] =
-+{
-+ 0, 0, 3, 4, 7, 10, 13, 16, 17, 18,
-+ 28, 29, 32, 33, 36, 37, 39, 40, 43, 44,
-+ 48
- };
-
--static const short yyr2[] = { 0,
-- 0, 2, 2, 2, 2, 0, 0, 9, 0, 2,
-- 0, 2, 0, 1, 0, 2, 0, 3, 1
-+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-+static const yysigned_char yyrhs[] =
-+{
-+ 17, 0, -1, -1, 18, 17, -1, 19, 17, -1,
-+ 11, 17, -1, 10, 8, -1, -1, -1, 22, 9,
-+ 14, 20, 23, 21, 24, 25, 15, -1, -1, 3,
-+ 8, -1, -1, 5, 12, -1, -1, 13, -1, -1,
-+ 27, 25, -1, -1, 6, 26, 25, -1, 7, -1
- };
-
--static const short yydefact[] = { 1,
-- 0, 0, 1, 1, 1, 0, 10, 5, 4, 2,
-- 3, 0, 6, 11, 0, 7, 12, 13, 14, 15,
-- 17, 19, 0, 15, 15, 8, 16, 18, 0, 0,
-- 0
-+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-+static const unsigned char yyrline[] =
-+{
-+ 0, 46, 46, 47, 48, 49, 56, 64, 68, 63,
-+ 80, 83, 90, 91, 97, 98, 104, 105, 107, 106,
-+ 114
- };
-+#endif
-
--static const short yydefgoto[] = { 9,
-- 4, 5, 14, 18, 6, 16, 20, 23, 25, 24
-+#if YYDEBUG || YYERROR_VERBOSE
-+/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
-+ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-+static const char *const yytname[] =
-+{
-+ "$end", "error", "$undefined", "TOK_COMMAND", "TOK_VPCI", "TOK_ITF",
-+ "TOK_DEFAULT", "TOK_ROUTE", "TOK_STR", "TOK_SOCKET", "TOK_OPTION",
-+ "TOK_CONTROL", "TOK_NUM", "TOK_PVC", "'{'", "'}'", "$accept", "all",
-+ "option", "sig", "@1", "@2", "opt_command", "opt_itf", "opt_via",
-+ "routes", "@3", "route", 0
- };
-+#endif
-
--static const short yypact[] = { -3,
-- 3, 4, -3, -3, -3, 6,-32768,-32768,-32768,-32768,
---32768, -1,-32768, 9, 7,-32768,-32768, 8,-32768, -5,
---32768,-32768, 1, -5, -5,-32768,-32768,-32768, 17, 18,
---32768
-+# ifdef YYPRINT
-+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
-+ token YYLEX-NUM. */
-+static const unsigned short int yytoknum[] =
-+{
-+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
-+ 265, 266, 267, 268, 123, 125
- };
-+# endif
-
--static const short yypgoto[] = { 5,
---32768,-32768,-32768,-32768,-32768,-32768,-32768, -21,-32768,-32768
-+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-+static const unsigned char yyr1[] =
-+{
-+ 0, 16, 17, 17, 17, 17, 18, 20, 21, 19,
-+ 22, 22, 23, 23, 24, 24, 25, 25, 26, 25,
-+ 27
- };
-
--
--#define YYLAST 21
--
--
--static const short yytable[] = { 1,
-- 21, 22, 27, 28, 29, -9, 2, 3, 10, 11,
-- 7, 8, 13, 15, 12, 26, 30, 31, 17, 0,
-- 19
-+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-+static const unsigned char yyr2[] =
-+{
-+ 0, 2, 0, 2, 2, 2, 2, 0, 0, 9,
-+ 0, 2, 0, 2, 0, 1, 0, 2, 0, 3,
-+ 1
- };
-
--static const short yycheck[] = { 3,
-- 6, 7, 24, 25, 0, 9, 10, 11, 4, 5,
-- 8, 8, 14, 5, 9, 15, 0, 0, 12, -1,
-- 13
-+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
-+ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
-+ means the default is an error. */
-+static const unsigned char yydefact[] =
-+{
-+ 2, 0, 0, 2, 0, 2, 2, 0, 11, 6,
-+ 5, 1, 3, 4, 0, 7, 12, 0, 8, 13,
-+ 14, 15, 16, 18, 20, 0, 16, 16, 9, 17,
-+ 19
- };
--/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
--#line 3 "/usr/lib/bison.simple"
--/* This file comes from bison-1.28. */
-
--/* Skeleton output parser for bison,
-- Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
-+/* YYDEFGOTO[NTERM-NUM]. */
-+static const yysigned_char yydefgoto[] =
-+{
-+ -1, 4, 5, 6, 16, 20, 7, 18, 22, 25,
-+ 27, 26
-+};
-
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
-+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
-+ STATE-NUM. */
-+#define YYPACT_NINF -16
-+static const yysigned_char yypact[] =
-+{
-+ -3, -6, 5, -3, 14, -3, -3, -4, -16, -16,
-+ -16, -16, -16, -16, 1, -16, 11, 6, -16, -16,
-+ 4, -16, 3, -16, -16, 7, 3, 3, -16, -16,
-+ -16
-+};
-
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
-+/* YYPGOTO[NTERM-NUM]. */
-+static const yysigned_char yypgoto[] =
-+{
-+ -16, -2, -16, -16, -16, -16, -16, -16, -16, -15,
-+ -16, -16
-+};
-
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
-+/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
-+ positive, shift that token. If negative, reduce the rule which
-+ number is the opposite. If zero, do what YYDEFACT says.
-+ If YYTABLE_NINF, syntax error. */
-+#define YYTABLE_NINF -11
-+static const yysigned_char yytable[] =
-+{
-+ 1, 10, 8, 12, 13, 14, -10, 2, 3, 23,
-+ 24, 29, 30, 9, 11, 15, 17, 21, 19, 0,
-+ 0, 0, 28
-+};
-
--/* As a special exception, when this file is copied by Bison into a
-- Bison output file, you may use that output file without restriction.
-- This special exception was added by the Free Software Foundation
-- in version 1.24 of Bison. */
-+static const yysigned_char yycheck[] =
-+{
-+ 3, 3, 8, 5, 6, 9, 9, 10, 11, 6,
-+ 7, 26, 27, 8, 0, 14, 5, 13, 12, -1,
-+ -1, -1, 15
-+};
-
--/* This is the parser code that is written into each bison parser
-- when the %semantic_parser declaration is not specified in the grammar.
-- It was written by Richard Stallman by simplifying the hairy parser
-- used when %semantic_parser is specified. */
--
--#ifndef YYSTACK_USE_ALLOCA
--#ifdef alloca
--#define YYSTACK_USE_ALLOCA
--#else /* alloca not defined */
--#ifdef __GNUC__
--#define YYSTACK_USE_ALLOCA
--#define alloca __builtin_alloca
--#else /* not GNU C. */
--#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
--#define YYSTACK_USE_ALLOCA
--#include <alloca.h>
--#else /* not sparc */
--/* We think this test detects Watcom and Microsoft C. */
--/* This used to test MSDOS, but that is a bad idea
-- since that symbol is in the user namespace. */
--#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
--#if 0 /* No need for malloc.h, which pollutes the namespace;
-- instead, just don't use alloca. */
--#include <malloc.h>
--#endif
--#else /* not MSDOS, or __TURBOC__ */
--#if defined(_AIX)
--/* I don't know what this was needed for, but it pollutes the namespace.
-- So I turned it off. rms, 2 May 1997. */
--/* #include <malloc.h> */
-- #pragma alloca
--#define YYSTACK_USE_ALLOCA
--#else /* not MSDOS, or __TURBOC__, or _AIX */
--#if 0
--#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
-- and on HPUX 10. Eventually we can turn this on. */
--#define YYSTACK_USE_ALLOCA
--#define alloca __builtin_alloca
--#endif /* __hpux */
--#endif
--#endif /* not _AIX */
--#endif /* not MSDOS, or __TURBOC__ */
--#endif /* not sparc */
--#endif /* not GNU C */
--#endif /* alloca not defined */
--#endif /* YYSTACK_USE_ALLOCA not defined */
-+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
-+ symbol of state STATE-NUM. */
-+static const unsigned char yystos[] =
-+{
-+ 0, 3, 10, 11, 17, 18, 19, 22, 8, 8,
-+ 17, 0, 17, 17, 9, 14, 20, 5, 23, 12,
-+ 21, 13, 24, 6, 7, 25, 27, 26, 15, 25,
-+ 25
-+};
-
--#ifdef YYSTACK_USE_ALLOCA
--#define YYSTACK_ALLOC alloca
--#else
--#define YYSTACK_ALLOC malloc
-+#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
-+# define YYSIZE_T __SIZE_TYPE__
-+#endif
-+#if ! defined (YYSIZE_T) && defined (size_t)
-+# define YYSIZE_T size_t
-+#endif
-+#if ! defined (YYSIZE_T)
-+# if defined (__STDC__) || defined (__cplusplus)
-+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYSIZE_T size_t
-+# endif
-+#endif
-+#if ! defined (YYSIZE_T)
-+# define YYSIZE_T unsigned int
- #endif
--
--/* Note: there must be only one dollar sign in this file.
-- It is replaced by the list of actions, each action
-- as one case of the switch. */
-
- #define yyerrok (yyerrstatus = 0)
- #define yyclearin (yychar = YYEMPTY)
--#define YYEMPTY -2
-+#define YYEMPTY (-2)
- #define YYEOF 0
-+
- #define YYACCEPT goto yyacceptlab
--#define YYABORT goto yyabortlab
--#define YYERROR goto yyerrlab1
--/* Like YYERROR except do call yyerror.
-- This remains here temporarily to ease the
-- transition to the new meaning of YYERROR, for GCC.
-+#define YYABORT goto yyabortlab
-+#define YYERROR goto yyerrorlab
-+
-+
-+/* Like YYERROR except do call yyerror. This remains here temporarily
-+ to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. */
-+
- #define YYFAIL goto yyerrlab
-+
- #define YYRECOVERING() (!!yyerrstatus)
--#define YYBACKUP(token, value) \
-+
-+#define YYBACKUP(Token, Value) \
- do \
- if (yychar == YYEMPTY && yylen == 1) \
-- { yychar = (token), yylval = (value); \
-- yychar1 = YYTRANSLATE (yychar); \
-+ { \
-+ yychar = (Token); \
-+ yylval = (Value); \
-+ yytoken = YYTRANSLATE (yychar); \
- YYPOPSTACK; \
- goto yybackup; \
- } \
- else \
-- { yyerror ("syntax error: cannot back up"); YYERROR; } \
-+ { \
-+ yyerror ("syntax error: cannot back up");\
-+ YYERROR; \
-+ } \
- while (0)
-
- #define YYTERROR 1
- #define YYERRCODE 256
-
--#ifndef YYPURE
--#define YYLEX yylex()
--#endif
-+/* YYLLOC_DEFAULT -- Compute the default location (before the actions
-+ are run). */
-
--#ifdef YYPURE
--#ifdef YYLSP_NEEDED
--#ifdef YYLEX_PARAM
--#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
--#else
--#define YYLEX yylex(&yylval, &yylloc)
-+#ifndef YYLLOC_DEFAULT
-+# define YYLLOC_DEFAULT(Current, Rhs, N) \
-+ ((Current).first_line = (Rhs)[1].first_line, \
-+ (Current).first_column = (Rhs)[1].first_column, \
-+ (Current).last_line = (Rhs)[N].last_line, \
-+ (Current).last_column = (Rhs)[N].last_column)
- #endif
--#else /* not YYLSP_NEEDED */
-+
-+/* YYLEX -- calling `yylex' with the right arguments. */
-+
- #ifdef YYLEX_PARAM
--#define YYLEX yylex(&yylval, YYLEX_PARAM)
-+# define YYLEX yylex (YYLEX_PARAM)
- #else
--#define YYLEX yylex(&yylval)
--#endif
--#endif /* not YYLSP_NEEDED */
-+# define YYLEX yylex ()
- #endif
-
--/* If nonreentrant, generate the variables here */
-+/* Enable debugging if requested. */
-+#if YYDEBUG
-
--#ifndef YYPURE
-+# ifndef YYFPRINTF
-+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-+# define YYFPRINTF fprintf
-+# endif
-+
-+# define YYDPRINTF(Args) \
-+do { \
-+ if (yydebug) \
-+ YYFPRINTF Args; \
-+} while (0)
-+
-+# define YYDSYMPRINT(Args) \
-+do { \
-+ if (yydebug) \
-+ yysymprint Args; \
-+} while (0)
-+
-+# define YYDSYMPRINTF(Title, Token, Value, Location) \
-+do { \
-+ if (yydebug) \
-+ { \
-+ YYFPRINTF (stderr, "%s ", Title); \
-+ yysymprint (stderr, \
-+ Token, Value); \
-+ YYFPRINTF (stderr, "\n"); \
-+ } \
-+} while (0)
-
--int yychar; /* the lookahead symbol */
--YYSTYPE yylval; /* the semantic value of the */
-- /* lookahead symbol */
-+/*------------------------------------------------------------------.
-+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-+| TOP (included). |
-+`------------------------------------------------------------------*/
-
--#ifdef YYLSP_NEEDED
--YYLTYPE yylloc; /* location data for the lookahead */
-- /* symbol */
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yy_stack_print (short int *bottom, short int *top)
-+#else
-+static void
-+yy_stack_print (bottom, top)
-+ short int *bottom;
-+ short int *top;
- #endif
-+{
-+ YYFPRINTF (stderr, "Stack now");
-+ for (/* Nothing. */; bottom <= top; ++bottom)
-+ YYFPRINTF (stderr, " %d", *bottom);
-+ YYFPRINTF (stderr, "\n");
-+}
-
--int yynerrs; /* number of parse errors so far */
--#endif /* not YYPURE */
-+# define YY_STACK_PRINT(Bottom, Top) \
-+do { \
-+ if (yydebug) \
-+ yy_stack_print ((Bottom), (Top)); \
-+} while (0)
-
--#if YYDEBUG != 0
--int yydebug; /* nonzero means print parse trace */
--/* Since this is uninitialized, it does not stop multiple parsers
-- from coexisting. */
-+
-+/*------------------------------------------------.
-+| Report that the YYRULE is going to be reduced. |
-+`------------------------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yy_reduce_print (int yyrule)
-+#else
-+static void
-+yy_reduce_print (yyrule)
-+ int yyrule;
- #endif
-+{
-+ int yyi;
-+ unsigned int yylno = yyrline[yyrule];
-+ YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
-+ yyrule - 1, yylno);
-+ /* Print the symbols being reduced, and their result. */
-+ for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
-+ YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
-+ YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
-+}
-+
-+# define YY_REDUCE_PRINT(Rule) \
-+do { \
-+ if (yydebug) \
-+ yy_reduce_print (Rule); \
-+} while (0)
-+
-+/* Nonzero means print parse trace. It is left uninitialized so that
-+ multiple parsers can coexist. */
-+int yydebug;
-+#else /* !YYDEBUG */
-+# define YYDPRINTF(Args)
-+# define YYDSYMPRINT(Args)
-+# define YYDSYMPRINTF(Title, Token, Value, Location)
-+# define YY_STACK_PRINT(Bottom, Top)
-+# define YY_REDUCE_PRINT(Rule)
-+#endif /* !YYDEBUG */
-
--/* YYINITDEPTH indicates the initial size of the parser's stacks */
-
-+/* YYINITDEPTH -- initial size of the parser's stacks. */
- #ifndef YYINITDEPTH
--#define YYINITDEPTH 200
-+# define YYINITDEPTH 200
- #endif
-
--/* YYMAXDEPTH is the maximum size the stacks can grow to
-- (effective only if the built-in stack extension method is used). */
-+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
-+ if the built-in stack extension method is used).
-
--#if YYMAXDEPTH == 0
--#undef YYMAXDEPTH
-+ Do not make this value too large; the results are undefined if
-+ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
-+ evaluated with infinite-precision integer arithmetic. */
-+
-+#if defined (YYMAXDEPTH) && YYMAXDEPTH == 0
-+# undef YYMAXDEPTH
- #endif
-
- #ifndef YYMAXDEPTH
--#define YYMAXDEPTH 10000
-+# define YYMAXDEPTH 10000
- #endif
-+
- \f
--/* Define __yy_memcpy. Note that the size argument
-- should be passed with type unsigned int, because that is what the non-GCC
-- definitions require. With GCC, __builtin_memcpy takes an arg
-- of type size_t, but it can handle unsigned int. */
--
--#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
--#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
--#else /* not GNU C or C++ */
--#ifndef __cplusplus
-
--/* This is the most reliable way to avoid incompatibilities
-- in available built-in functions on various systems. */
--static void
--__yy_memcpy (to, from, count)
-- char *to;
-- char *from;
-- unsigned int count;
--{
-- register char *f = from;
-- register char *t = to;
-- register int i = count;
-+#if YYERROR_VERBOSE
-+
-+# ifndef yystrlen
-+# if defined (__GLIBC__) && defined (_STRING_H)
-+# define yystrlen strlen
-+# else
-+/* Return the length of YYSTR. */
-+static YYSIZE_T
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystrlen (const char *yystr)
-+# else
-+yystrlen (yystr)
-+ const char *yystr;
-+# endif
-+{
-+ register const char *yys = yystr;
-+
-+ while (*yys++ != '\0')
-+ continue;
-+
-+ return yys - yystr - 1;
-+}
-+# endif
-+# endif
-+
-+# ifndef yystpcpy
-+# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
-+# define yystpcpy stpcpy
-+# else
-+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
-+ YYDEST. */
-+static char *
-+# if defined (__STDC__) || defined (__cplusplus)
-+yystpcpy (char *yydest, const char *yysrc)
-+# else
-+yystpcpy (yydest, yysrc)
-+ char *yydest;
-+ const char *yysrc;
-+# endif
-+{
-+ register char *yyd = yydest;
-+ register const char *yys = yysrc;
-
-- while (i-- > 0)
-- *t++ = *f++;
-+ while ((*yyd++ = *yys++) != '\0')
-+ continue;
-+
-+ return yyd - 1;
- }
-+# endif
-+# endif
-+
-+#endif /* !YYERROR_VERBOSE */
-
--#else /* __cplusplus */
-+\f
-+
-+#if YYDEBUG
-+/*--------------------------------.
-+| Print this symbol on YYOUTPUT. |
-+`--------------------------------*/
-
--/* This is the most reliable way to avoid incompatibilities
-- in available built-in functions on various systems. */
-+#if defined (__STDC__) || defined (__cplusplus)
- static void
--__yy_memcpy (char *to, char *from, unsigned int count)
-+yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
-+#else
-+static void
-+yysymprint (yyoutput, yytype, yyvaluep)
-+ FILE *yyoutput;
-+ int yytype;
-+ YYSTYPE *yyvaluep;
-+#endif
+--- a/src/arpd/io.c
++++ b/src/arpd/io.c
+@@ -277,7 +277,8 @@ static void accept_new(void)
+ struct atm_qos qos;
+ ENTRY *entry;
+ VCC *vcc;
+- int fd,len,size,error;
++ int fd,error;
++ socklen_t len,size;
+
+ len = sizeof(addr);
+ if ((fd = accept(incoming,(struct sockaddr *) &addr,&len)) < 0) {
+@@ -614,7 +615,8 @@ int ip_itf_info(int number,uint32_t *ip,
+
+ int get_local(int fd,struct sockaddr_atmsvc *addr)
+ {
+- int length,result;
++ int result;
++ size_t length;
+
+ length = sizeof(struct sockaddr_atmsvc);
+ result = getsockname(fd,(struct sockaddr *) addr,&length);
+--- a/src/arpd/table.c
++++ b/src/arpd/table.c
+@@ -101,7 +101,8 @@ static void dump_vcc(VCC *vcc)
+ char addr_buf[MAX_ATM_ADDR_LEN+1];
+ char qos_buf[MAX_ATM_QOS_LEN+1];
+ struct atm_qos qos;
+- int size,sndbuf;
++ int sndbuf;
++ socklen_t size;
+
+ size = sizeof(addr);
+ if (getpeername(vcc->fd,(struct sockaddr *) &addr,&size) < 0) {
+--- a/src/ilmid/asn1/asn_int.c
++++ b/src/ilmid/asn1/asn_int.c
+@@ -185,7 +185,7 @@ FILE* f _AND_
+ AsnInt* v _AND_
+ unsigned short int indent)
{
-- register char *t = to;
-- register char *f = from;
-- register int i = count;
-+ /* Pacify ``unused variable'' warnings. */
-+ (void) yyvaluep;
-
-- while (i-- > 0)
-- *t++ = *f++;
-+ if (yytype < YYNTOKENS)
-+ {
-+ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
-+# ifdef YYPRINT
-+ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-+# endif
-+ }
-+ else
-+ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-+
-+ switch (yytype)
-+ {
-+ default:
-+ break;
-+ }
-+ YYFPRINTF (yyoutput, ")");
- }
-
-+#endif /* ! YYDEBUG */
-+/*-----------------------------------------------.
-+| Release the memory associated to this symbol. |
-+`-----------------------------------------------*/
-+
-+#if defined (__STDC__) || defined (__cplusplus)
-+static void
-+yydestruct (int yytype, YYSTYPE *yyvaluep)
-+#else
-+static void
-+yydestruct (yytype, yyvaluep)
-+ int yytype;
-+ YYSTYPE *yyvaluep;
- #endif
--#endif
-+{
-+ /* Pacify ``unused variable'' warnings. */
-+ (void) yyvaluep;
-+
-+ switch (yytype)
-+ {
-+
-+ default:
-+ break;
-+ }
-+}
- \f
--#line 217 "/usr/lib/bison.simple"
-
--/* The user can define YYPARSE_PARAM as the name of an argument to be passed
-- into yyparse. The argument should have type void *.
-- It should actually point to an object.
-- Grammar actions can access the variable by casting it
-- to the proper pointer type. */
-+/* Prevent warnings from -Wmissing-prototypes. */
+- fprintf(f,"%d", *v);
++ fprintf(f,"%ld", *v);
+ }
- #ifdef YYPARSE_PARAM
--#ifdef __cplusplus
--#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
--#define YYPARSE_PARAM_DECL
--#else /* not __cplusplus */
--#define YYPARSE_PARAM_ARG YYPARSE_PARAM
--#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
--#endif /* not __cplusplus */
--#else /* not YYPARSE_PARAM */
--#define YYPARSE_PARAM_ARG
--#define YYPARSE_PARAM_DECL
--#endif /* not YYPARSE_PARAM */
-+# if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void *YYPARSE_PARAM);
-+# else
-+int yyparse ();
-+# endif
-+#else /* ! YYPARSE_PARAM */
-+#if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void);
-+#else
-+int yyparse ();
-+#endif
-+#endif /* ! YYPARSE_PARAM */
-+
-+
-+
-+/* The lookahead symbol. */
-+int yychar;
-+
-+/* The semantic value of the lookahead symbol. */
-+YYSTYPE yylval;
-+
-+/* Number of syntax errors so far. */
-+int yynerrs;
-+
-+
-+
-+/*----------.
-+| yyparse. |
-+`----------*/
--/* Prevent warning if -Wstrict-prototypes. */
--#ifdef __GNUC__
- #ifdef YYPARSE_PARAM
--int yyparse (void *);
-+# if defined (__STDC__) || defined (__cplusplus)
-+int yyparse (void *YYPARSE_PARAM)
-+# else
-+int yyparse (YYPARSE_PARAM)
-+ void *YYPARSE_PARAM;
-+# endif
-+#else /* ! YYPARSE_PARAM */
-+#if defined (__STDC__) || defined (__cplusplus)
-+int
-+yyparse (void)
- #else
--int yyparse (void);
-+int
-+yyparse ()
-+
- #endif
- #endif
--
--int
--yyparse(YYPARSE_PARAM_ARG)
-- YYPARSE_PARAM_DECL
+@@ -370,5 +370,5 @@ FILE* f _AND_
+ UAsnInt* v _AND_
+ unsigned short int indent)
{
-+
- register int yystate;
- register int yyn;
-- register short *yyssp;
-+ int yyresult;
-+ /* Number of tokens to shift before error messages enabled. */
-+ int yyerrstatus;
-+ /* Lookahead token as an internal (translated) token number. */
-+ int yytoken = 0;
-+
-+ /* Three stacks and their tools:
-+ `yyss': related to states,
-+ `yyvs': related to semantic values,
-+ `yyls': related to locations.
-+
-+ Refer to the stacks thru separate pointers, to allow yyoverflow
-+ to reallocate them elsewhere. */
-+
-+ /* The state stack. */
-+ short int yyssa[YYINITDEPTH];
-+ short int *yyss = yyssa;
-+ register short int *yyssp;
-+
-+ /* The semantic value stack. */
-+ YYSTYPE yyvsa[YYINITDEPTH];
-+ YYSTYPE *yyvs = yyvsa;
- register YYSTYPE *yyvsp;
-- int yyerrstatus; /* number of tokens to shift before error messages enabled */
-- int yychar1 = 0; /* lookahead token as an internal (translated) token number */
--
-- short yyssa[YYINITDEPTH]; /* the state stack */
-- YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
-
-- short *yyss = yyssa; /* refer to the stacks thru separate pointers */
-- YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
-
--#ifdef YYLSP_NEEDED
-- YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
-- YYLTYPE *yyls = yylsa;
-- YYLTYPE *yylsp;
-
--#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
--#else
- #define YYPOPSTACK (yyvsp--, yyssp--)
--#endif
-
-- int yystacksize = YYINITDEPTH;
-- int yyfree_stacks = 0;
-+ YYSIZE_T yystacksize = YYINITDEPTH;
-
--#ifdef YYPURE
-- int yychar;
-- YYSTYPE yylval;
-- int yynerrs;
--#ifdef YYLSP_NEEDED
-- YYLTYPE yylloc;
--#endif
--#endif
-+ /* The variables used to return semantic value and location from the
-+ action routines. */
-+ YYSTYPE yyval;
-
-- YYSTYPE yyval; /* the variable used to return */
-- /* semantic values from the action */
-- /* routines */
-
-+ /* When reducing, the number of symbols on the RHS of the reduced
-+ rule. */
- int yylen;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Starting parse\n");
--#endif
-+ YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
-@@ -479,110 +853,97 @@
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
-
-- yyssp = yyss - 1;
-+ yyssp = yyss;
- yyvsp = yyvs;
--#ifdef YYLSP_NEEDED
-- yylsp = yyls;
--#endif
-
--/* Push a new state, which is found in yystate . */
--/* In all cases, when you get here, the value and location stacks
-- have just been pushed. so pushing a state here evens the stacks. */
--yynewstate:
-
-- *++yyssp = yystate;
-+ goto yysetstate;
-
-- if (yyssp >= yyss + yystacksize - 1)
-- {
-- /* Give user a chance to reallocate the stack */
-- /* Use copies of these so that the &'s don't force the real ones into memory. */
-- YYSTYPE *yyvs1 = yyvs;
-- short *yyss1 = yyss;
--#ifdef YYLSP_NEEDED
-- YYLTYPE *yyls1 = yyls;
--#endif
-+/*------------------------------------------------------------.
-+| yynewstate -- Push a new state, which is found in yystate. |
-+`------------------------------------------------------------*/
-+ yynewstate:
-+ /* In all cases, when you get here, the value and location stacks
-+ have just been pushed. so pushing a state here evens the stacks.
-+ */
-+ yyssp++;
-
-+ yysetstate:
-+ *yyssp = yystate;
-+
-+ if (yyss + yystacksize - 1 <= yyssp)
-+ {
- /* Get the current used size of the three stacks, in elements. */
-- int size = yyssp - yyss + 1;
-+ YYSIZE_T yysize = yyssp - yyss + 1;
-
- #ifdef yyoverflow
-- /* Each stack pointer address is followed by the size of
-- the data in use in that stack, in bytes. */
--#ifdef YYLSP_NEEDED
-- /* This used to be a conditional around just the two extra args,
-- but that might be undefined if yyoverflow is a macro. */
-- yyoverflow("parser stack overflow",
-- &yyss1, size * sizeof (*yyssp),
-- &yyvs1, size * sizeof (*yyvsp),
-- &yyls1, size * sizeof (*yylsp),
-- &yystacksize);
--#else
-- yyoverflow("parser stack overflow",
-- &yyss1, size * sizeof (*yyssp),
-- &yyvs1, size * sizeof (*yyvsp),
-- &yystacksize);
--#endif
--
-- yyss = yyss1; yyvs = yyvs1;
--#ifdef YYLSP_NEEDED
-- yyls = yyls1;
--#endif
-+ {
-+ /* Give user a chance to reallocate the stack. Use copies of
-+ these so that the &'s don't force the real ones into
-+ memory. */
-+ YYSTYPE *yyvs1 = yyvs;
-+ short int *yyss1 = yyss;
-+
-+
-+ /* Each stack pointer address is followed by the size of the
-+ data in use in that stack, in bytes. This used to be a
-+ conditional around just the two extra args, but that might
-+ be undefined if yyoverflow is a macro. */
-+ yyoverflow ("parser stack overflow",
-+ &yyss1, yysize * sizeof (*yyssp),
-+ &yyvs1, yysize * sizeof (*yyvsp),
-+
-+ &yystacksize);
-+
-+ yyss = yyss1;
-+ yyvs = yyvs1;
-+ }
- #else /* no yyoverflow */
-+# ifndef YYSTACK_RELOCATE
-+ goto yyoverflowlab;
-+# else
- /* Extend the stack our own way. */
-- if (yystacksize >= YYMAXDEPTH)
-- {
-- yyerror("parser stack overflow");
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
--#endif
-- }
-- return 2;
-- }
-+ if (YYMAXDEPTH <= yystacksize)
-+ goto yyoverflowlab;
- yystacksize *= 2;
-- if (yystacksize > YYMAXDEPTH)
-+ if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
--#ifndef YYSTACK_USE_ALLOCA
-- yyfree_stacks = 1;
--#endif
-- yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
-- __yy_memcpy ((char *)yyss, (char *)yyss1,
-- size * (unsigned int) sizeof (*yyssp));
-- yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
-- __yy_memcpy ((char *)yyvs, (char *)yyvs1,
-- size * (unsigned int) sizeof (*yyvsp));
--#ifdef YYLSP_NEEDED
-- yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
-- __yy_memcpy ((char *)yyls, (char *)yyls1,
-- size * (unsigned int) sizeof (*yylsp));
--#endif
-+
-+ {
-+ short int *yyss1 = yyss;
-+ union yyalloc *yyptr =
-+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
-+ if (! yyptr)
-+ goto yyoverflowlab;
-+ YYSTACK_RELOCATE (yyss);
-+ YYSTACK_RELOCATE (yyvs);
-+
-+# undef YYSTACK_RELOCATE
-+ if (yyss1 != yyssa)
-+ YYSTACK_FREE (yyss1);
-+ }
-+# endif
- #endif /* no yyoverflow */
-
-- yyssp = yyss + size - 1;
-- yyvsp = yyvs + size - 1;
--#ifdef YYLSP_NEEDED
-- yylsp = yyls + size - 1;
--#endif
-+ yyssp = yyss + yysize - 1;
-+ yyvsp = yyvs + yysize - 1;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Stack size increased to %d\n", yystacksize);
--#endif
-
-- if (yyssp >= yyss + yystacksize - 1)
-+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
-+ (unsigned long int) yystacksize));
-+
-+ if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Entering state %d\n", yystate);
--#endif
-+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- goto yybackup;
-- yybackup:
-+
-+/*-----------.
-+| yybackup. |
-+`-----------*/
-+yybackup:
-
- /* Do appropriate processing given the current state. */
- /* Read a lookahead token if we need one and don't already have one. */
-@@ -591,194 +952,167 @@
- /* First try to decide what to do without reference to lookahead token. */
-
- yyn = yypact[yystate];
-- if (yyn == YYFLAG)
-+ if (yyn == YYPACT_NINF)
- goto yydefault;
-
- /* Not known => get a lookahead token if don't already have one. */
+- fprintf(f,"%u", *v);
++ fprintf(f,"%lu", *v);
+ }
+--- a/src/ilmid/asn1/asn_oid.c
++++ b/src/ilmid/asn1/asn_oid.c
+@@ -127,7 +127,7 @@ unsigned short int indent)
+ if (firstArcNum > 2)
+ firstArcNum = 2;
-- /* yychar is either YYEMPTY or YYEOF
-- or a valid token in external form. */
--
-+ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
- if (yychar == YYEMPTY)
- {
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Reading a token: ");
--#endif
-+ YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
+- fprintf(f,"%u %u", firstArcNum, arcNum - (firstArcNum * 40));
++ fprintf(f,"%d %lu", firstArcNum, arcNum - (firstArcNum * 40));
-- /* Convert token to internal form (in yychar1) for indexing tables with */
--
-- if (yychar <= 0) /* This means end of input. */
-+ if (yychar <= YYEOF)
- {
-- yychar1 = 0;
-- yychar = YYEOF; /* Don't call YYLEX any more */
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Now at end of input.\n");
--#endif
-+ yychar = yytoken = YYEOF;
-+ YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
+ for (; i < v->octetLen ; )
{
-- yychar1 = YYTRANSLATE(yychar);
--
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
-- /* Give the individual parser a way to print the precise meaning
-- of a token, for further debugging info. */
--#ifdef YYPRINT
-- YYPRINT (stderr, yychar, yylval);
--#endif
-- fprintf (stderr, ")\n");
-- }
--#endif
-+ yytoken = YYTRANSLATE (yychar);
-+ YYDSYMPRINTF ("Next token is", yytoken, &yylval, &yylloc);
- }
+@@ -136,7 +136,7 @@ unsigned short int indent)
-- yyn += yychar1;
-- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
-+ /* If the proper action on seeing token YYTOKEN is to reduce or to
-+ detect an error, take that action. */
-+ yyn += yytoken;
-+ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
--
- yyn = yytable[yyn];
--
-- /* yyn is what to do for this token type in this state.
-- Negative => reduce, -yyn is rule number.
-- Positive => shift, yyn is new state.
-- New state is final state => don't bother to shift,
-- just return success.
-- 0, or most negative number => error. */
--
-- if (yyn < 0)
-+ if (yyn <= 0)
- {
-- if (yyn == YYFLAG)
-+ if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
+ arcNum = (arcNum << 7) + (v->octs[i] & 0x7f);
+ i++;
+- fprintf(f," %u", arcNum);
++ fprintf(f," %lu", arcNum);
}
-- else if (yyn == 0)
-- goto yyerrlab;
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- /* Shift the lookahead token. */
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
--#endif
-+ YYDPRINTF ((stderr, "Shifting token %s, ", yytname[yytoken]));
-
- /* Discard the token being shifted unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
-
- *++yyvsp = yylval;
--#ifdef YYLSP_NEEDED
-- *++yylsp = yylloc;
--#endif
-
-- /* count tokens shifted since error; after three, turn off error status. */
-- if (yyerrstatus) yyerrstatus--;
-+
-+ /* Count tokens shifted since error; after three, turn off error
-+ status. */
-+ if (yyerrstatus)
-+ yyerrstatus--;
-
- yystate = yyn;
- goto yynewstate;
-
--/* Do the default action for the current state. */
--yydefault:
-
-+/*-----------------------------------------------------------.
-+| yydefault -- do the default action for the current state. |
-+`-----------------------------------------------------------*/
-+yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
-+ goto yyreduce;
-+
-
--/* Do a reduction. yyn is the number of a rule to reduce with. */
-+/*-----------------------------.
-+| yyreduce -- Do a reduction. |
-+`-----------------------------*/
- yyreduce:
-+ /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-- if (yylen > 0)
-- yyval = yyvsp[1-yylen]; /* implement default value of the action */
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- int i;
-+ /* If YYLEN is nonzero, implement the default value of the action:
-+ `$$ = $1'.
-
-- fprintf (stderr, "Reducing via rule %d (line %d), ",
-- yyn, yyrline[yyn]);
-+ Otherwise, the following line sets YYVAL to garbage.
-+ This behavior is undocumented and Bison
-+ users should not rely upon it. Assigning to YYVAL
-+ unconditionally makes the parser a bit smaller, and it avoids a
-+ GCC warning that YYVAL may be used uninitialized. */
-+ yyval = yyvsp[1-yylen];
-
-- /* Print the symbols being reduced, and their result. */
-- for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
-- fprintf (stderr, "%s ", yytname[yyrhs[i]]);
-- fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
-- }
--#endif
-
--
-- switch (yyn) {
--
--case 4:
--#line 47 "cfg_y.y"
--{
-+ YY_REDUCE_PRINT (yyn);
-+ switch (yyn)
-+ {
-+ case 5:
-+#line 50 "cfg_y.y"
-+ {
- control_init(yyvsp[-1].str);
-- ;
-- break;}
--case 5:
--#line 54 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 6:
-+#line 57 "cfg_y.y"
-+ {
- fab_option(yyvsp[-1].str,yyvsp[0].str);
-- ;
-- break;}
--case 6:
--#line 61 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 7:
-+#line 64 "cfg_y.y"
-+ {
- itf = 0;
-- ;
-- break;}
--case 7:
--#line 65 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 8:
-+#line 68 "cfg_y.y"
-+ {
- char *tmp;
-
- tmp = strdup(yyvsp[-3].str);
- if (!tmp) yyerror(strerror(errno));
- sig = sig_vc(yyvsp[-4].str,tmp,itf);
-- ;
-- break;}
--case 9:
--#line 77 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 10:
-+#line 80 "cfg_y.y"
-+ {
- yyval.str = NULL;
-- ;
-- break;}
--case 10:
--#line 81 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 11:
-+#line 84 "cfg_y.y"
-+ {
- yyval.str = strdup(yyvsp[0].str);
- if (!yyval.str) yyerror(strerror(errno));
-- ;
-- break;}
--case 12:
--#line 89 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 13:
-+#line 92 "cfg_y.y"
-+ {
- itf = yyvsp[0].num;
-- ;
-- break;}
--case 14:
--#line 96 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 15:
-+#line 99 "cfg_y.y"
-+ {
- sig->pvc = yyvsp[0].pvc;
-- ;
-- break;}
--case 17:
--#line 104 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 18:
-+#line 107 "cfg_y.y"
-+ {
- put_route(NULL,0,sig);
-- ;
-- break;}
--case 19:
--#line 112 "cfg_y.y"
--{
-+ }
-+ break;
-+
-+ case 20:
-+#line 115 "cfg_y.y"
-+ {
- struct sockaddr_atmsvc addr;
- char *mask;
-
-@@ -790,228 +1124,236 @@
- return;
- }
- put_route(&addr,mask ? strtol(mask,NULL,10) : INT_MAX,sig);
-- ;
-- break;}
--}
-- /* the action file gets copied in in place of this dollarsign */
--#line 543 "/usr/lib/bison.simple"
-+ }
-+ break;
-+
-+
-+ }
-+
-+/* Line 1010 of yacc.c. */
-+#line 1135 "y.tab.c"
- \f
- yyvsp -= yylen;
- yyssp -= yylen;
--#ifdef YYLSP_NEEDED
-- yylsp -= yylen;
--#endif
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- short *ssp1 = yyss - 1;
-- fprintf (stderr, "state stack now");
-- while (ssp1 != yyssp)
-- fprintf (stderr, " %d", *++ssp1);
-- fprintf (stderr, "\n");
-- }
--#endif
-+
-+ YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
-
--#ifdef YYLSP_NEEDED
-- yylsp++;
-- if (yylen == 0)
-- {
-- yylsp->first_line = yylloc.first_line;
-- yylsp->first_column = yylloc.first_column;
-- yylsp->last_line = (yylsp-1)->last_line;
-- yylsp->last_column = (yylsp-1)->last_column;
-- yylsp->text = 0;
-- }
-- else
-- {
-- yylsp->last_line = (yylsp+yylen-1)->last_line;
-- yylsp->last_column = (yylsp+yylen-1)->last_column;
-- }
--#endif
-
-- /* Now "shift" the result of the reduction.
-- Determine what state that goes to,
-- based on the state we popped back to
-- and the rule number reduced by. */
-+ /* Now `shift' the result of the reduction. Determine what state
-+ that goes to, based on the state we popped back to and the rule
-+ number reduced by. */
-
- yyn = yyr1[yyn];
-
-- yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
-- if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
-+ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
-+ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
-- yystate = yydefgoto[yyn - YYNTBASE];
-+ yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
--yyerrlab: /* here on detecting error */
-
-- if (! yyerrstatus)
-- /* If not already recovering from an error, report this error. */
-+/*------------------------------------.
-+| yyerrlab -- here on detecting error |
-+`------------------------------------*/
-+yyerrlab:
-+ /* If not already recovering from an error, report this error. */
-+ if (!yyerrstatus)
- {
- ++yynerrs;
--
--#ifdef YYERROR_VERBOSE
-+#if YYERROR_VERBOSE
- yyn = yypact[yystate];
-
-- if (yyn > YYFLAG && yyn < YYLAST)
-+ if (YYPACT_NINF < yyn && yyn < YYLAST)
- {
-- int size = 0;
-- char *msg;
-- int x, count;
--
-- count = 0;
-- /* Start X at -yyn if nec to avoid negative indexes in yycheck. */
-- for (x = (yyn < 0 ? -yyn : 0);
-- x < (sizeof(yytname) / sizeof(char *)); x++)
-- if (yycheck[x + yyn] == x)
-- size += strlen(yytname[x]) + 15, count++;
-- msg = (char *) malloc(size + 15);
-- if (msg != 0)
-+ YYSIZE_T yysize = 0;
-+ int yytype = YYTRANSLATE (yychar);
-+ const char* yyprefix;
-+ char *yymsg;
-+ int yyx;
-+
-+ /* Start YYX at -YYN if negative to avoid negative indexes in
-+ YYCHECK. */
-+ int yyxbegin = yyn < 0 ? -yyn : 0;
-+
-+ /* Stay within bounds of both yycheck and yytname. */
-+ int yychecklim = YYLAST - yyn;
-+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
-+ int yycount = 0;
-+
-+ yyprefix = ", expecting ";
-+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
-+ {
-+ yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
-+ yycount += 1;
-+ if (yycount == 5)
-+ {
-+ yysize = 0;
-+ break;
-+ }
-+ }
-+ yysize += (sizeof ("syntax error, unexpected ")
-+ + yystrlen (yytname[yytype]));
-+ yymsg = (char *) YYSTACK_ALLOC (yysize);
-+ if (yymsg != 0)
- {
-- strcpy(msg, "parse error");
-+ char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
-+ yyp = yystpcpy (yyp, yytname[yytype]);
+ fprintf(f,"}");
-- if (count < 5)
-+ if (yycount < 5)
- {
-- count = 0;
-- for (x = (yyn < 0 ? -yyn : 0);
-- x < (sizeof(yytname) / sizeof(char *)); x++)
-- if (yycheck[x + yyn] == x)
-+ yyprefix = ", expecting ";
-+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
-- strcat(msg, count == 0 ? ", expecting `" : " or `");
-- strcat(msg, yytname[x]);
-- strcat(msg, "'");
-- count++;
-+ yyp = yystpcpy (yyp, yyprefix);
-+ yyp = yystpcpy (yyp, yytname[yyx]);
-+ yyprefix = " or ";
- }
- }
-- yyerror(msg);
-- free(msg);
-+ yyerror (yymsg);
-+ YYSTACK_FREE (yymsg);
- }
- else
-- yyerror ("parse error; also virtual memory exceeded");
-+ yyerror ("syntax error; also virtual memory exhausted");
+--- a/src/lane/connect.c
++++ b/src/lane/connect.c
+@@ -258,7 +258,8 @@ static int
+ data_handler(const Event_t *event, void *funcdata)
+ {
+ Conn_t *tmp, *newconn;
+- int fd, nbytes;
++ int fd;
++ socklen_t nbytes;
+ static char buffer[BUFSIZE];
+ LaneControl_t *ctmp;
+ struct sockaddr_atmsvc addr;
+--- a/src/lane/connect_bus.c
++++ b/src/lane/connect_bus.c
+@@ -170,7 +170,8 @@ static int
+ data_handler(const Event_t *event, void *funcdata)
+ {
+ Conn_t *tmp, *newconn;
+- int fd, nbytes;
++ int fd;
++ socklen_t nbytes;
+ static char buffer[BUFSIZE];
+ struct sockaddr_atmsvc addr;
+
+--- a/src/lane/lane_atm.c
++++ b/src/lane/lane_atm.c
+@@ -138,7 +138,7 @@ atm_connect_back(const AtmAddr_t *our_ad
+ struct atm_blli blli;
+ struct atm_qos qos;
+ int fd, ret;
+- int len = sizeof(address);
++ socklen_t len = sizeof(address);
+
+ fd = socket(PF_ATMSVC, SOCK_DGRAM, 0);
+ if (fd <0) {
+--- a/src/lane/lecs.c
++++ b/src/lane/lecs.c
+@@ -119,7 +119,7 @@ int main(int argc, char **argv)
+ int just_dump=0;
+ fd_set fds;
+ struct sockaddr_atmsvc client;
+- int len;
++ socklen_t len;
+ unsigned char buffer[P_SIZE];
+
+ while(i!=-1) {
+--- a/src/lib/ans.c
++++ b/src/lib/ans.c
+@@ -41,7 +41,7 @@
+ static int ans(const char *text,int wanted,void *result,int res_len)
+ {
+ unsigned char answer[MAX_ANSWER];
+- unsigned char name[MAX_NAME];
++ char name[MAX_NAME];
+ unsigned char *pos,*data,*found;
+ int answer_len,name_len,data_len,found_len;
+ int questions,answers;
+--- a/src/lib/sdu2cell.c
++++ b/src/lib/sdu2cell.c
+@@ -15,7 +15,8 @@ int sdu2cell(int s,int sizes,const int *
+ {
+ struct atm_qos qos;
+ int trailer,total,cells;
+- int size,i;
++ int i;
++ socklen_t size;
+
+ size = sizeof(qos);
+ if (getsockopt(s,SOL_AAL,SO_ATMQOS,&qos,&size) < 0) return -1;
+--- a/src/lib/unix.c
++++ b/src/lib/unix.c
+@@ -63,8 +63,8 @@ int un_attach(const char *path)
+ int un_recv_connect(int s,void *buf,int size)
+ {
+ struct sockaddr_un addr;
+- int addr_size;
+ int len;
++ socklen_t addr_size;
+
+ addr_size = sizeof(addr);
+ len = recvfrom(s,buf,size,0,(struct sockaddr *) &addr,&addr_size);
+--- a/src/maint/atmtcp.c
++++ b/src/maint/atmtcp.c
+@@ -817,7 +817,8 @@ int main(int argc,char **argv)
}
- else
- #endif /* YYERROR_VERBOSE */
-- yyerror("parse error");
-+ yyerror ("syntax error");
- }
-
-- goto yyerrlab1;
--yyerrlab1: /* here on error raised explicitly by an action */
-+
-
- if (yyerrstatus == 3)
- {
-- /* if just tried and failed to reuse lookahead token after an error, discard it. */
-+ /* If just tried and failed to reuse lookahead token after an
-+ error, discard it. */
-
-- /* return failure if at end of input */
-- if (yychar == YYEOF)
-- YYABORT;
--
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
--#endif
-+ if (yychar <= YYEOF)
-+ {
-+ /* If at end of input, pop the error token,
-+ then the rest of the stack, then return failure. */
-+ if (yychar == YYEOF)
-+ for (;;)
-+ {
-+ YYPOPSTACK;
-+ if (yyssp == yyss)
-+ YYABORT;
-+ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
-+ yydestruct (yystos[*yyssp], yyvsp);
-+ }
-+ }
-+ else
-+ {
-+ YYDSYMPRINTF ("Error: discarding", yytoken, &yylval, &yylloc);
-+ yydestruct (yytoken, &yylval);
-+ yychar = YYEMPTY;
-
-- yychar = YYEMPTY;
-+ }
- }
-
-- /* Else will try to reuse lookahead token
-- after shifting the error token. */
--
-- yyerrstatus = 3; /* Each real token shifted decrements this */
-+ /* Else will try to reuse lookahead token after shifting the error
-+ token. */
-+ goto yyerrlab1;
-
-- goto yyerrhandle;
-
--yyerrdefault: /* current state does not do anything special for the error token. */
-+/*---------------------------------------------------.
-+| yyerrorlab -- error raised explicitly by YYERROR. |
-+`---------------------------------------------------*/
-+yyerrorlab:
-
--#if 0
-- /* This is wrong; only states that explicitly want error tokens
-- should shift them. */
-- yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
-- if (yyn) goto yydefault;
-+#ifdef __GNUC__
-+ /* Pacify GCC when the user code never invokes YYERROR and the label
-+ yyerrorlab therefore never appears in user code. */
-+ if (0)
-+ goto yyerrorlab;
- #endif
-
--yyerrpop: /* pop the current state because it cannot handle the error token */
--
-- if (yyssp == yyss) YYABORT;
-- yyvsp--;
-- yystate = *--yyssp;
--#ifdef YYLSP_NEEDED
-- yylsp--;
--#endif
-+ yyvsp -= yylen;
-+ yyssp -= yylen;
-+ yystate = *yyssp;
-+ goto yyerrlab1;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- {
-- short *ssp1 = yyss - 1;
-- fprintf (stderr, "Error: state stack now");
-- while (ssp1 != yyssp)
-- fprintf (stderr, " %d", *++ssp1);
-- fprintf (stderr, "\n");
-- }
--#endif
-
--yyerrhandle:
-+/*-------------------------------------------------------------.
-+| yyerrlab1 -- common code for both syntax error and YYERROR. |
-+`-------------------------------------------------------------*/
-+yyerrlab1:
-+ yyerrstatus = 3; /* Each real token shifted decrements this. */
-
-- yyn = yypact[yystate];
-- if (yyn == YYFLAG)
-- goto yyerrdefault;
-+ for (;;)
-+ {
-+ yyn = yypact[yystate];
-+ if (yyn != YYPACT_NINF)
-+ {
-+ yyn += YYTERROR;
-+ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
-+ {
-+ yyn = yytable[yyn];
-+ if (0 < yyn)
-+ break;
-+ }
-+ }
-
-- yyn += YYTERROR;
-- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
-- goto yyerrdefault;
-+ /* Pop the current state because it cannot handle the error token. */
-+ if (yyssp == yyss)
-+ YYABORT;
-
-- yyn = yytable[yyn];
-- if (yyn < 0)
-- {
-- if (yyn == YYFLAG)
-- goto yyerrpop;
-- yyn = -yyn;
-- goto yyreduce;
-+ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
-+ yydestruct (yystos[yystate], yyvsp);
-+ YYPOPSTACK;
-+ yystate = *yyssp;
-+ YY_STACK_PRINT (yyss, yyssp);
- }
-- else if (yyn == 0)
-- goto yyerrpop;
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
--#if YYDEBUG != 0
-- if (yydebug)
-- fprintf(stderr, "Shifting error token, ");
--#endif
-+ YYDPRINTF ((stderr, "Shifting error token, "));
-
- *++yyvsp = yylval;
--#ifdef YYLSP_NEEDED
-- *++yylsp = yylloc;
--#endif
-+
-
- yystate = yyn;
- goto yynewstate;
-
-- yyacceptlab:
-- /* YYACCEPT comes here. */
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
--#endif
-- }
-- return 0;
-
-- yyabortlab:
-- /* YYABORT comes here. */
-- if (yyfree_stacks)
-- {
-- free (yyss);
-- free (yyvs);
--#ifdef YYLSP_NEEDED
-- free (yyls);
-+/*-------------------------------------.
-+| yyacceptlab -- YYACCEPT comes here. |
-+`-------------------------------------*/
-+yyacceptlab:
-+ yyresult = 0;
-+ goto yyreturn;
-+
-+/*-----------------------------------.
-+| yyabortlab -- YYABORT comes here. |
-+`-----------------------------------*/
-+yyabortlab:
-+ yyresult = 1;
-+ goto yyreturn;
-+
-+#ifndef yyoverflow
-+/*----------------------------------------------.
-+| yyoverflowlab -- parser overflow comes here. |
-+`----------------------------------------------*/
-+yyoverflowlab:
-+ yyerror ("parser stack overflow");
-+ yyresult = 2;
-+ /* Fall through. */
-+#endif
-+
-+yyreturn:
-+#ifndef yyoverflow
-+ if (yyss != yyssa)
-+ YYSTACK_FREE (yyss);
- #endif
-- }
-- return 1;
-+ return yyresult;
- }
--#line 126 "cfg_y.y"
-+
-+
-+
---- linux-atm-2.4.1.orig/src/switch/cfg_y.y
-+++ linux-atm-2.4.1/src/switch/cfg_y.y
-@@ -10,6 +10,7 @@
- #include <string.h>
- #include <errno.h>
- #include <limits.h>
-+#include <stdlib.h>
-
- #include "atm.h"
-
-@@ -19,6 +20,8 @@
- #include "swc.h"
-
-
-+extern void yyerror(const char *s);
-+
- static int itf;
- static SIGNALING_ENTITY *sig;
-
---- linux-atm-2.4.1.orig/src/switch/cfg_y.h
-+++ linux-atm-2.4.1/src/switch/cfg_y.h
-@@ -1,19 +1,77 @@
--typedef union {
-+/* A Bison parser, made by GNU Bison 1.875d. */
-+
-+/* Skeleton parser for Yacc-like parsing with Bison,
-+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330,
-+ Boston, MA 02111-1307, USA. */
-+
-+/* As a special exception, when this file is copied by Bison into a
-+ Bison output file, you may use that output file without restriction.
-+ This special exception was added by the Free Software Foundation
-+ in version 1.24 of Bison. */
-+
-+/* Tokens. */
-+#ifndef YYTOKENTYPE
-+# define YYTOKENTYPE
-+ /* Put the tokens into the symbol table, so that GDB and other debuggers
-+ know about them. */
-+ enum yytokentype {
-+ TOK_COMMAND = 258,
-+ TOK_VPCI = 259,
-+ TOK_ITF = 260,
-+ TOK_DEFAULT = 261,
-+ TOK_ROUTE = 262,
-+ TOK_STR = 263,
-+ TOK_SOCKET = 264,
-+ TOK_OPTION = 265,
-+ TOK_CONTROL = 266,
-+ TOK_NUM = 267,
-+ TOK_PVC = 268
-+ };
-+#endif
-+#define TOK_COMMAND 258
-+#define TOK_VPCI 259
-+#define TOK_ITF 260
-+#define TOK_DEFAULT 261
-+#define TOK_ROUTE 262
-+#define TOK_STR 263
-+#define TOK_SOCKET 264
-+#define TOK_OPTION 265
-+#define TOK_CONTROL 266
-+#define TOK_NUM 267
-+#define TOK_PVC 268
-+
-+
-+
-+
-+#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
-+#line 30 "cfg_y.y"
-+typedef union YYSTYPE {
- int num;
- char *str;
- struct sockaddr_atmpvc pvc;
- } YYSTYPE;
--#define TOK_COMMAND 257
--#define TOK_VPCI 258
--#define TOK_ITF 259
--#define TOK_DEFAULT 260
--#define TOK_ROUTE 261
--#define TOK_STR 262
--#define TOK_SOCKET 263
--#define TOK_OPTION 264
--#define TOK_CONTROL 265
--#define TOK_NUM 266
--#define TOK_PVC 267
--
-+/* Line 1285 of yacc.c. */
-+#line 69 "y.tab.h"
-+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-+# define YYSTYPE_IS_DECLARED 1
-+# define YYSTYPE_IS_TRIVIAL 1
-+#endif
-
- extern YYSTYPE yylval;
-+
-+
-+
---- linux-atm-2.4.1.orig/src/switch/debug/Makefile.in
-+++ linux-atm-2.4.1/src/switch/debug/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -90,8 +90,7 @@
- INCLUDES = -I$(top_builddir)/src/qgen
-
- sw_debug_SOURCES = debug.c
--sw_debug_XTRAS = $(top_builddir)/src/switch/libsw.a \
-- $(top_builddir)/src/lib/libatm.la
-+sw_debug_XTRAS = $(top_builddir)/src/switch/libsw.a $(top_builddir)/src/lib/libatm.la
-
- sw_debug_LDADD = $(sw_debug_XTRAS) -lfl
-
-@@ -121,8 +120,9 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/debug.P
- SOURCES = $(sw_debug_SOURCES)
- OBJECTS = $(sw_debug_OBJECTS)
-
-@@ -130,9 +130,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/switch/debug/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/switch/debug/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -146,9 +146,6 @@
-
- maintainer-clean-noinstPROGRAMS:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -171,9 +168,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -212,7 +206,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -228,6 +222,11 @@
- subdir = src/switch/debug
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/switch/debug/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -238,11 +237,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--debug.o: debug.c ../../../config.h ../../../src/include/atm.h \
-- ../../../src/include/stdint.h ../../../src/include/atmd.h \
-- ../../../src/qgen/uni.h ../fab.h ../proto.h \
-- ../../../src/include/atmsap.h ../sig.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -279,27 +305,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-noinstPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -310,12 +336,14 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/switch/debug/debug.c
-+++ linux-atm-2.4.1/src/switch/debug/debug.c
-@@ -43,7 +43,7 @@
-
- void fab_init(CALL *call)
- {
-- PRV(call) = alloc_t(FAB);
-+ call->fab = alloc_t(FAB);
- PRV(call)->next = calls;
- calls = call;
- }
-@@ -59,7 +59,7 @@
- diag(COMPONENT,DIAG_FATAL,"fab_destroy: call %p not found",call);
- *walk = PRV(call)->next;
- free(PRV(call));
-- PRV(call) = NULL;
-+ call->fab = NULL;
- }
-
-
---- linux-atm-2.4.1.orig/src/switch/tcp/Makefile.in
-+++ linux-atm-2.4.1/src/switch/tcp/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -90,8 +90,7 @@
- INCLUDES = -I$(top_builddir)/src/qgen
-
- sw_tcp_SOURCES = tcpsw.c
--sw_tcp_XTRAS = $(top_builddir)/src/switch/libsw.a \
-- $(top_builddir)/src/lib/libatm.la
-+sw_tcp_XTRAS = $(top_builddir)/src/switch/libsw.a $(top_builddir)/src/lib/libatm.la
-
- sw_tcp_LDADD = $(sw_tcp_XTRAS) -lfl
- sw_tcp_DEPENDENCIES = $(sw_tcp_XTRAS)
-@@ -120,8 +119,9 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/tcpsw.P
- SOURCES = $(sw_tcp_SOURCES)
- OBJECTS = $(sw_tcp_OBJECTS)
-
-@@ -129,9 +129,9 @@
- .SUFFIXES:
- .SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/switch/tcp/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/switch/tcp/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -145,9 +145,6 @@
-
- maintainer-clean-noinstPROGRAMS:
-
--.c.o:
-- $(COMPILE) -c $<
--
- # FIXME: We should only use cygpath when building on Windows,
- # and only if it is available.
- .c.obj:
-@@ -170,9 +167,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -211,7 +205,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -227,6 +221,11 @@
- subdir = src/switch/tcp
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/switch/tcp/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -237,11 +236,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--tcpsw.o: tcpsw.c ../../../config.h ../../../src/include/stdint.h \
-- ../../../src/include/atm.h ../../../src/include/atmd.h \
-- ../../../src/qgen/uni.h ../fab.h ../proto.h \
-- ../../../src/include/atmsap.h ../sig.h ../dispatch.h ../swc.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -278,27 +304,27 @@
-
- maintainer-clean-generic:
- mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
-- mostlyclean-libtool mostlyclean-tags \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
- mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \
-- clean-generic mostlyclean-am
-+ clean-depend clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-noinstPROGRAMS distclean-compile \
-- distclean-libtool distclean-tags distclean-generic \
-- clean-am
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-
- maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
- maintainer-clean-compile maintainer-clean-libtool \
-- maintainer-clean-tags maintainer-clean-generic \
-- distclean-am
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -309,12 +335,14 @@
- mostlyclean-compile distclean-compile clean-compile \
- maintainer-clean-compile mostlyclean-libtool distclean-libtool \
- clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
--distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
--dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
--install-exec install-data-am install-data install-am install \
--uninstall-am uninstall all-redirect all-am all installdirs \
--mostlyclean-generic distclean-generic clean-generic \
--maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-
-
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
---- linux-atm-2.4.1.orig/src/switch/tcp/tcpsw.c
-+++ linux-atm-2.4.1/src/switch/tcp/tcpsw.c
-@@ -345,7 +345,7 @@
-
- void fab_init(CALL *call)
- {
-- PRV(call) = alloc_t(FAB);
-+ call->fab = alloc_t(FAB);
- PRV(call)->active = 0;
- PRV(call)->next = calls;
- calls = call;
-@@ -362,7 +362,7 @@
- diag(COMPONENT,DIAG_FATAL,"fab_destroy: call %p not found",call);
- *walk = PRV(call)->next;
- free(PRV(call));
-- PRV(call) = NULL;
-+ call->fab = NULL;
- }
-
-
---- linux-atm-2.4.1.orig/src/config/Makefile.in
-+++ linux-atm-2.4.1/src/config/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -96,14 +96,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/config/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/config/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -186,7 +186,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -202,6 +202,11 @@
- subdir = src/config
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/config/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/config/init-redhat/Makefile.in
-+++ linux-atm-2.4.1/src/config/init-redhat/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -94,14 +94,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/config/init-redhat/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/config/init-redhat/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -114,6 +114,11 @@
- subdir = src/config/init-redhat
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/config/init-redhat/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/extra/Makefile.in
-+++ linux-atm-2.4.1/src/extra/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -96,14 +96,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/extra/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extra/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -188,7 +188,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -204,6 +204,11 @@
- subdir = src/extra
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extra/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/extra/ANS/Makefile.in
-+++ linux-atm-2.4.1/src/extra/ANS/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -94,14 +94,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/extra/ANS/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extra/ANS/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -114,6 +114,11 @@
- subdir = src/extra/ANS
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extra/ANS/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/doc/Makefile.in
-+++ linux-atm-2.4.1/doc/Makefile.in
-@@ -1,4 +1,4 @@
--# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
- # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
-@@ -96,14 +96,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
+ else if (!strcmp(ARG,"listen") ||
+ (do_background = !strcmp(ARG,"listen-bg"))) {
+- int fd,port,addr_len;
++ int fd,port;
++ socklen_t addr_len;
+ int *fd2 = alloc_t(int);
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+ if ((fd = socket(PF_INET,SOCK_STREAM,0)) < 0) {
+--- a/src/maint/hediag.c
++++ b/src/maint/hediag.c
+@@ -1,6 +1,7 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <unistd.h>
++#include <string.h>
+ #include <sys/ioctl.h>
+ #include <sys/types.h>
+ #include <sys/socket.h>
+--- a/src/mpoad/io.c
++++ b/src/mpoad/io.c
+@@ -521,7 +521,8 @@ static int msg_from_mps(int slot)
+ static int accept_conn(int slot)
+ {
+ struct sockaddr_atmsvc sa;
+- int i, new_fd, sa_len;
++ int i, new_fd;
++ socklen_t sa_len;
+
+ sa_len = sizeof(sa);
+ new_fd = accept(fds[slot].fd, (struct sockaddr *)&sa, &sa_len);
+--- a/src/sigd/io.c
++++ b/src/sigd/io.c
+@@ -355,7 +355,7 @@ int get_pvc(int itf,int *vci)
+ error = 0;
+ if (bind(s,(struct sockaddr *) &addr,sizeof(addr)) < 0) error = errno;
+ else {
+- int size;
++ socklen_t size;
+
+ size = sizeof(addr);
+ if (getsockname(s,(struct sockaddr *) &addr,&size) < 0)
+--- a/src/test/ttcp.c
++++ b/src/test/ttcp.c
+@@ -92,7 +92,8 @@ struct sockaddr_in frominet;
+ struct sockaddr_atmsvc satm;
+ struct atm_qos qos;
-@@ -116,6 +116,11 @@
- subdir = doc
+-int domain, fromlen;
++int domain;
++socklen_t fromlen;
+ int fd; /* fd of network socket */
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/debian/patches/00list
-+++ linux-atm-2.4.1/debian/patches/00list
-@@ -0,0 +1 @@
-+10_atmbr2684.h
---- linux-atm-2.4.1.orig/debian/patches/10_atmbr2684.h.dpatch
-+++ linux-atm-2.4.1/debian/patches/10_atmbr2684.h.dpatch
-@@ -0,0 +1,598 @@
-+#! /bin/sh -e
-+## 01_kernel-header.dpatch by <bengen+debian@hilluzination.de>
-+##
-+## All lines beginning with ## DP:' are a description of the patch.
-+## DP: add header file atmbr2684.h
-+
-+if [ -e /usr/include/linux/atmbr2684.h ]; then exit 0; fi
-+
-+if [ $# -ne 1 ]; then
-+ echo "basename $0: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+case "$1" in
-+ -patch) patch -f --no-backup-if-mismatch -p1 < $0;;
-+ -unpatch) patch -f --no-backup-if-mismatch -E -R -p1 < $0;;
-+ *)
-+ echo "basename $0: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+@DPATCH@
-+
-+--- linux-atm.orig/src/include/linux/atmbr2684.h
-++++ linux-atm/src/include/linux/atmbr2684.h
-+@@ -0,0 +1,101 @@
-++#ifndef _LINUX_ATMBR2684_H
-++#define _LINUX_ATMBR2684_H
-++
-++#include <linux/atm.h>
-++#include <linux/if.h> /* For IFNAMSIZ */
-++
-++/*
-++ * Type of media we're bridging (ethernet, token ring, etc) Currently only
-++ * ethernet is supported
-++ */
-++#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */
-++#define BR2684_MEDIA_802_4 (1) /* 802.4 */
-++#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */
-++#define BR2684_MEDIA_FDDI (3)
-++#define BR2684_MEDIA_802_6 (4) /* 802.6 */
-++
-++/*
-++ * Is there FCS inbound on this VC? This currently isn't supported.
-++ */
-++#define BR2684_FCSIN_NO (0)
-++#define BR2684_FCSIN_IGNORE (1)
-++#define BR2684_FCSIN_VERIFY (2)
-++
-++/*
-++ * Is there FCS outbound on this VC? This currently isn't supported.
-++ */
-++#define BR2684_FCSOUT_NO (0)
-++#define BR2684_FCSOUT_SENDZERO (1)
-++#define BR2684_FCSOUT_GENERATE (2)
-++
-++/*
-++ * Does this VC include LLC encapsulation?
-++ */
-++#define BR2684_ENCAPS_VC (0) /* VC-mux */
-++#define BR2684_ENCAPS_LLC (1)
-++#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */
-++
-++/*
-++ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
-++ * the first element of the structure is the backend number and the rest
-++ * is per-backend specific
-++ */
-++struct atm_newif_br2684 {
-++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
-++ int media; /* BR2684_MEDIA_* */
-++ char ifname[IFNAMSIZ];
-++ int mtu;
-++};
-++
-++/*
-++ * This structure is used to specify a br2684 interface - either by a
-++ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
-++ */
-++#define BR2684_FIND_BYNOTHING (0)
-++#define BR2684_FIND_BYNUM (1)
-++#define BR2684_FIND_BYIFNAME (2)
-++struct br2684_if_spec {
-++ int method; /* BR2684_FIND_* */
-++ union {
-++ char ifname[IFNAMSIZ];
-++ int devnum;
-++ } spec;
-++};
-++
-++/*
-++ * This is for the ATM_SETBACKEND call - these are like socket families:
-++ * the first element of the structure is the backend number and the rest
-++ * is per-backend specific
-++ */
-++struct atm_backend_br2684 {
-++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
-++ struct br2684_if_spec ifspec;
-++ int fcs_in; /* BR2684_FCSIN_* */
-++ int fcs_out; /* BR2684_FCSOUT_* */
-++ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
-++ int encaps; /* BR2684_ENCAPS_* */
-++ int has_vpiid; /* 1: use vpn_id - Unsupported */
-++ __u8 vpn_id[7];
-++ int send_padding; /* unsupported */
-++ int min_size; /* we will pad smaller packets than this */
-++};
-++
-++/*
-++ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
-++ * terminating a large number of IP-only vcc's. When netfilter allows
-++ * efficient per-if in/out filters, this support will be removed
-++ */
-++struct br2684_filter {
-++ __u32 prefix; /* network byte order */
-++ __u32 netmask; /* 0 = disable filter */
-++};
-++
-++struct br2684_filter_set {
-++ struct br2684_if_spec ifspec;
-++ struct br2684_filter filter;
-++};
-++
-++#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \
-++ struct br2684_filter_set)
-++
-++#endif /* _LINUX_ATMBR2684_H */
-+--- linux-atm.orig/src/include/linux/atmdev.h
-++++ linux-atm/src/include/linux/atmdev.h
-+@@ -0,0 +1,468 @@
-++/* atmdev.h - ATM device driver declarations and various related items */
-++
-++/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-++
-++
-++#ifndef LINUX_ATMDEV_H
-++#define LINUX_ATMDEV_H
-++
-++
-++#include <linux/config.h>
-++#include <linux/atmapi.h>
-++#include <linux/atm.h>
-++#include <linux/atmioc.h>
-++
-++
-++#define ESI_LEN 6
-++
-++#define ATM_OC3_PCR (155520000/270*260/8/53)
-++ /* OC3 link rate: 155520000 bps
-++ SONET overhead: /270*260 (9 section, 1 path)
-++ bits per cell: /8/53
-++ max cell rate: 353207.547 cells/sec */
-++#define ATM_25_PCR ((25600000/8-8000)/54)
-++ /* 25 Mbps ATM cell rate (59111) */
-++#define ATM_OC12_PCR (622080000/1080*1040/8/53)
-++ /* OC12 link rate: 622080000 bps
-++ SONET overhead: /1080*1040
-++ bits per cell: /8/53
-++ max cell rate: 1412830.188 cells/sec */
-++#define ATM_DS3_PCR (8000*12)
-++ /* DS3: 12 cells in a 125 usec time slot */
-++
-++#define ATM_SD(s) ((s)->sk->protinfo.af_atm)
-++
-++
-++#define __AAL_STAT_ITEMS \
-++ __HANDLE_ITEM(tx); /* TX okay */ \
-++ __HANDLE_ITEM(tx_err); /* TX errors */ \
-++ __HANDLE_ITEM(rx); /* RX okay */ \
-++ __HANDLE_ITEM(rx_err); /* RX errors */ \
-++ __HANDLE_ITEM(rx_drop); /* RX out of memory */
-++
-++struct atm_aal_stats {
-++#define __HANDLE_ITEM(i) int i
-++ __AAL_STAT_ITEMS
-++#undef __HANDLE_ITEM
-++};
-++
-++
-++struct atm_dev_stats {
-++ struct atm_aal_stats aal0;
-++ struct atm_aal_stats aal34;
-++ struct atm_aal_stats aal5;
-++} __ATM_API_ALIGN;
-++
-++
-++#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
-++ /* get link rate */
-++#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
-++ /* get interface names (numbers) */
-++#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
-++ /* get interface type name */
-++#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
-++ /* get interface ESI */
-++#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
-++ /* get itf's local ATM addr. list */
-++#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
-++ /* reset itf's ATM address list */
-++#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
-++ /* add a local ATM address */
-++#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
-++ /* remove a local ATM address */
-++#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
-++ /* get connection identifier range */
-++#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
-++ /* set connection identifier range */
-++#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
-++ /* set interface ESI */
-++#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
-++ /* force interface ESI */
-++#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
-++ /* get AAL layer statistics */
-++#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
-++ /* get AAL layer statistics and zero */
-++#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
-++ /* get loopback mode */
-++#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
-++ /* set loopback mode */
-++#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
-++ /* query supported loopback modes */
-++#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
-++ /* enable or disable single-copy */
-++#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
-++ /* set backend handler */
-++#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
-++ /* use backend to make new if */
-++
-++/*
-++ * These are backend handkers that can be set via the ATM_SETBACKEND call
-++ * above. In the future we may support dynamic loading of these - for now,
-++ * they're just being used to share the ATMIOC_BACKEND ioctls
-++ */
-++#define ATM_BACKEND_RAW 0
-++#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
-++#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
-++
-++/* for ATM_GETTYPE */
-++#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
-++
-++/*
-++ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
-++ */
-++
-++/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
-++#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
-++#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
-++#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
-++/* RESERVED 4 loop back on PHY side ---' */
-++#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
-++#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
-++
-++/* Direction of loopback */
-++#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
-++#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
-++
-++#define __ATM_LM_XTLOC(n) ((n) & 0xff)
-++#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
-++
-++#define ATM_LM_NONE 0 /* no loopback */
-++
-++#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
-++#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
-++#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
-++#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-++
-++#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
-++#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
-++#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
-++#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-++
-++/*
-++ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
-++ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
-++ */
-++
-++
-++struct atm_iobuf {
-++ int length;
-++ void *buffer;
-++};
-++
-++/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-++
-++#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
-++
-++struct atm_cirange {
-++ char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
-++ char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
-++};
-++
-++/* for ATM_SETSC; actually taken from the ATM_VF number space */
-++
-++#define ATM_SC_RX 1024 /* enable RX single-copy */
-++#define ATM_SC_TX 2048 /* enable TX single-copy */
-++
-++#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
-++ anyway */
-++
-++/* MF: change_qos (Modify) flags */
-++
-++#define ATM_MF_IMMED 1 /* Block until change is effective */
-++#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
-++#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
-++#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
-++#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
-++#define ATM_MF_BWD 32 /* Set the backward direction parameters */
-++
-++#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
-++ ATM_MF_DEC_SHP | ATM_MF_BWD)
-++
-++/*
-++ * ATM_VS_* are used to express VC state in a human-friendly way.
-++ */
-++
-++#define ATM_VS_IDLE 0 /* VC is not used */
-++#define ATM_VS_CONNECTED 1 /* VC is connected */
-++#define ATM_VS_CLOSING 2 /* VC is closing */
-++#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
-++#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
-++#define ATM_VS_BOUND 5 /* VC is bound */
-++
-++#define ATM_VS2TXT_MAP \
-++ "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-++
-++#define ATM_VF2TXT_MAP \
-++ "ADDR", "READY", "PARTIAL", "REGIS", \
-++ "RELEASED", "HASQOS", "LISTEN", "META", \
-++ "256", "512", "1024", "2048", \
-++ "SESSION", "HASSAP", "BOUND", "CLOSE"
-++
-++
-++#ifndef __KERNEL__
-++#undef __AAL_STAT_ITEMS
-++#else
-++
-++#include <linux/sched.h> /* wait_queue_head_t */
-++#include <linux/time.h> /* struct timeval */
-++#include <linux/net.h>
-++#include <linux/skbuff.h> /* struct sk_buff */
-++#include <linux/uio.h>
-++#include <net/sock.h>
-++#include <asm/atomic.h>
-++
-++#ifdef CONFIG_PROC_FS
-++#include <linux/proc_fs.h>
-++#endif
-++
-++
-++struct k_atm_aal_stats {
-++#define __HANDLE_ITEM(i) atomic_t i
-++ __AAL_STAT_ITEMS
-++#undef __HANDLE_ITEM
-++};
-++
-++
-++struct k_atm_dev_stats {
-++ struct k_atm_aal_stats aal0;
-++ struct k_atm_aal_stats aal34;
-++ struct k_atm_aal_stats aal5;
-++};
-++
-++
-++enum {
-++ ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared
-++ by device driver. */
-++ ATM_VF_READY, /* VC is ready to transfer data. Set by device
-++ driver, cleared by anybody. */
-++ ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC
-++ setup), controlled by socket layer */
-++ ATM_VF_REGIS, /* registered with demon, controlled by SVC
-++ socket layer */
-++ ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket
-++ layer */
-++ ATM_VF_RELEASED, /* demon has indicated/requested release,
-++ controlled by SVC socket layer */
-++ ATM_VF_HASQOS, /* QOS parameters have been set */
-++ ATM_VF_LISTEN, /* socket is used for listening */
-++ ATM_VF_META, /* SVC socket isn't used for normal data
-++ traffic and doesn't depend on signaling
-++ to be available */
-++ ATM_VF_SESSION, /* VCC is p2mp session control descriptor */
-++ ATM_VF_HASSAP, /* SAP has been set */
-++ ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/
-++};
-++
-++
-++#define ATM_VF2VS(flags) \
-++ (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
-++ test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
-++ test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
-++ test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
-++ test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
-++
-++
-++enum {
-++ ATM_DF_CLOSE, /* close device when last VCC is closed */
-++};
-++
-++
-++#define ATM_PHY_SIG_LOST 0 /* no carrier/light */
-++#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */
-++#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */
-++
-++#define ATM_ATMOPT_CLP 1 /* set CLP bit */
-++
-++
-++typedef struct { unsigned long bits; } atm_vcc_flags_t;
-++
-++
-++struct atm_vcc {
-++ atm_vcc_flags_t flags; /* VCC flags (ATM_VF_*) */
-++ short vpi; /* VPI and VCI (types must be equal */
-++ /* with sockaddr) */
-++ int vci;
-++ unsigned long aal_options; /* AAL layer options */
-++ unsigned long atm_options; /* ATM layer options */
-++ struct atm_dev *dev; /* device back pointer */
-++ struct atm_qos qos; /* QOS */
-++ struct atm_sap sap; /* SAP */
-++ void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
-++ void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
-++ int (*push_oam)(struct atm_vcc *vcc,void *cell);
-++ int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
-++ void *dev_data; /* per-device data */
-++ void *proto_data; /* per-protocol data */
-++ struct k_atm_aal_stats *stats; /* pointer to AAL stats group */
-++ wait_queue_head_t sleep; /* if socket is busy */
-++ struct sock *sk; /* socket backpointer */
-++ struct atm_vcc *prev,*next;
-++ /* SVC part --- may move later ------------------------------------- */
-++ short itf; /* interface number */
-++ struct sockaddr_atmsvc local;
-++ struct sockaddr_atmsvc remote;
-++ void (*callback)(struct atm_vcc *vcc);
-++ struct sk_buff_head listenq;
-++ int backlog_quota; /* number of connection requests we */
-++ /* can still accept */
-++ int reply; /* also used by ATMTCP */
-++ /* Multipoint part ------------------------------------------------- */
-++ struct atm_vcc *session; /* session VCC descriptor */
-++ /* Other stuff ----------------------------------------------------- */
-++ void *user_back; /* user backlink - not touched by */
-++ /* native ATM stack. Currently used */
-++ /* by CLIP and sch_atm. */
-++};
-++
-++
-++struct atm_dev_addr {
-++ struct sockaddr_atmsvc addr; /* ATM address */
-++ struct atm_dev_addr *next; /* next address */
-++};
-++
-++
-++typedef struct { unsigned int bits; } atm_dev_flags_t;
-++
-++
-++struct atm_dev {
-++ const struct atmdev_ops *ops; /* device operations; NULL if unused */
-++ const struct atmphy_ops *phy; /* PHY operations, may be undefined */
-++ /* (NULL) */
-++ const char *type; /* device type name */
-++ int number; /* device index */
-++ struct atm_vcc *vccs; /* VCC table (or NULL) */
-++ struct atm_vcc *last; /* last VCC (or undefined) */
-++ void *dev_data; /* per-device data */
-++ void *phy_data; /* private PHY date */
-++ atm_dev_flags_t flags; /* device flags (ATM_DF_*) */
-++ struct atm_dev_addr *local; /* local ATM addresses */
-++ unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */
-++ struct atm_cirange ci_range; /* VPI/VCI range */
-++ struct k_atm_dev_stats stats; /* statistics */
-++ char signal; /* signal status (ATM_PHY_SIG_*) */
-++ int link_rate; /* link rate (default: OC3) */
-++ atomic_t refcnt; /* reference count */
-++ spinlock_t lock; /* protect internal members */
-++#ifdef CONFIG_PROC_FS
-++ struct proc_dir_entry *proc_entry; /* proc entry */
-++ char *proc_name; /* proc entry name */
-++#endif
-++ struct list_head dev_list; /* linkage */
-++};
-++
-++
-++/*
-++ * ioctl, getsockopt, setsockopt, and sg_send are optional and can be set to
-++ * NULL. */
-++
-++/* OF: send_Oam Flags */
-++
-++#define ATM_OF_IMMED 1 /* Attempt immediate delivery */
-++#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */
-++
-++struct atmdev_ops { /* only send is required */
-++ void (*dev_close)(struct atm_dev *dev);
-++ int (*open)(struct atm_vcc *vcc,short vpi,int vci);
-++ void (*close)(struct atm_vcc *vcc);
-++ int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void *arg);
-++ int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
-++ void *optval,int optlen);
-++ int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
-++ void *optval,int optlen);
-++ int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
-++ int (*sg_send)(struct atm_vcc *vcc,unsigned long start,
-++ unsigned long size);
-++#if 0 /* keep the current hack for now */
-++ int (*send_iovec)(struct atm_vcc *vcc,struct iovec *iov,int size,
-++ void (*discard)(struct atm_vcc *vcc,void *user),void *user);
-++#endif
-++ int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
-++ void (*phy_put)(struct atm_dev *dev,unsigned char value,
-++ unsigned long addr);
-++ unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
-++ void (*feedback)(struct atm_vcc *vcc,struct sk_buff *skb,
-++ unsigned long start,unsigned long dest,int len);
-++ int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
-++ int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
-++ struct module *owner;
-++};
-++
-++
-++struct atmphy_ops {
-++ int (*start)(struct atm_dev *dev);
-++ int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void *arg);
-++ void (*interrupt)(struct atm_dev *dev);
-++ int (*stop)(struct atm_dev *dev);
-++};
-++
-++struct atm_skb_data {
-++ struct atm_vcc *vcc; /* ATM VCC */
-++ unsigned long atm_options; /* ATM layer options */
-++};
-++
-++#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
-++
-++struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
-++ int number,atm_dev_flags_t *flags); /* number == -1: pick first available */
-++struct atm_dev *atm_dev_lookup(int number);
-++void atm_dev_deregister(struct atm_dev *dev);
-++void shutdown_atm_dev(struct atm_dev *dev);
-++void bind_vcc(struct atm_vcc *vcc,struct atm_dev *dev);
-++
-++
-++/*
-++ * This is approximately the algorithm used by alloc_skb.
-++ *
-++ */
-++
-++static inline int atm_guess_pdu2truesize(int pdu_size)
-++{
-++ return ((pdu_size+15) & ~15) + sizeof(struct sk_buff);
-++}
-++
-++
-++static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
-++{
-++ atomic_add(truesize, &vcc->sk->rmem_alloc);
-++}
-++
-++
-++static inline void atm_return(struct atm_vcc *vcc,int truesize)
-++{
-++ atomic_sub(truesize, &vcc->sk->rmem_alloc);
-++}
-++
-++
-++static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
-++{
-++ return (size + atomic_read(&vcc->sk->wmem_alloc)) < vcc->sk->sndbuf;
-++}
-++
-++
-++static inline void atm_dev_hold(struct atm_dev *dev)
-++{
-++ atomic_inc(&dev->refcnt);
-++}
-++
-++
-++static inline void atm_dev_release(struct atm_dev *dev)
-++{
-++ atomic_dec(&dev->refcnt);
-++
-++ if ((atomic_read(&dev->refcnt) == 1) &&
-++ test_bit(ATM_DF_CLOSE,&dev->flags))
-++ shutdown_atm_dev(dev);
-++}
-++
-++
-++int atm_charge(struct atm_vcc *vcc,int truesize);
-++struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
-++ int gfp_flags);
-++int atm_find_ci(struct atm_vcc *vcc,short *vpi,int *vci);
-++int atm_pcr_goal(struct atm_trafprm *tp);
-++
-++void atm_async_release_vcc(struct atm_vcc *vcc,int reply);
-++
-++#endif /* __KERNEL__ */
-++
-++#endif
---- linux-atm-2.4.1.orig/debian/control
-+++ linux-atm-2.4.1/debian/control
-@@ -0,0 +1,57 @@
-+Source: linux-atm
-+Section: net
-+Priority: optional
-+Maintainer: Peter De Schrijver (p2) <p2@mind.be>
-+Build-Depends: debhelper (>> 4.0.0), bison, flex, perl, dpatch, automake1.4
-+Standards-Version: 3.6.1
-+
-+Package: atm-tools
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Description: Base programs for ATM in Linux, the net-tools for ATM
-+ This package provides all the basic programs needed for setting up,
-+ monitoring and tuning ATM networks. Such as:
-+ * atmsigd, an ATM signal daemon that implements the ATM UNI protocol.
-+ * atmtcp, a tool to setup ATM over TCP connections.
-+ * atmarpd, an implementation of the ATMARP protocol (RFC1577, RFC1755)
-+ * zeppelin, an ATM LAN Emulation client daemon
-+ * les and bus, ATM LAN Emulation service daemons
-+ .
-+ Notice that upstream still flags these tools as experimental software and
-+ says that there is still a number of known bugs and issues. The
-+ software is, however, in productive use at a number of sites and is
-+ working reliably.
-+ .
-+ Homepage: http://linux-atm.sourceforge.net/
-+
-+Package: atm-dev
-+Depends: libatm1-dev
-+Architecture: all
-+Section: oldlibs
-+Description: Development files for compiling ATM programs (dummy package)
-+ This dummy package provides a transition from the previous atm packages.
-+ It is provided for backwards compatibility only and may be removedafter
-+ the upgrade has completed or when when no other package depend on it.
-+
-+Package: libatm1
-+Section: libs
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Conflicts: atm-tools (<< 2.4.1-6)
-+Description: shared library for ATM (Asynchronous Transfer Mode)
-+ Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
-+ .
-+ Homepage: http://linux-atm.sourceforge.net/
-+
-+Package: libatm1-dev
-+Section: libdevel
-+Architecture: any
-+Depends: libc6-dev, libatm1
-+Replaces: atm-dev (<< 2.4.1-7)
-+Conflicts: atm-dev (<< 2.4.1-7)
-+Provides: libatm-dev
-+Description: Development files for compiling ATM programs
-+ Header files and development libraries for compiling ATM (Asynchronous
-+ Transfer Mode) related programs.
-+ .
-+ Homepage: http://linux-atm.sourceforge.net/
---- linux-atm-2.4.1.orig/debian/rules
-+++ linux-atm-2.4.1/debian/rules
-@@ -0,0 +1,136 @@
-+#!/usr/bin/make -f
-+# Sample debian/rules that uses debhelper.
-+# GNU copyright 1997 to 1999 by Joey Hess.
-+
-+# Uncomment this to turn on verbose mode.
-+#export DH_VERBOSE=1
-+
-+# This is the debhelper compatability version to use.
-+export DH_COMPAT=4
-+
-+export PACKAGE=linux-atm
-+
-+buildindeppackages=atm-dev
-+buildarchpackages=atm-tools libatm1 libatm1-dev
-+
-+# generate -ppackage1 -ppackage2 ... commandline for debhelper
-+dhbuildarchpackages=$(addprefix -p,$(buildarchpackages))
-+dhbuildindeppackages=$(addprefix -p,$(buildindeppackages))
-+
-+include /usr/share/dpatch/dpatch.make
-+
-+configure: configure-stamp
-+configure-stamp:
-+ dh_testdir
-+ ./configure --prefix /usr --mandir /usr/share/man --sysconfdir /etc
-+ touch configure-stamp
-+
-+build: configure-stamp build-stamp
-+build-stamp: patch-stamp
-+ dh_testdir
-+
-+ # Add here commands to compile the package.
-+ $(MAKE) $(EXTRA_VARS)
-+ cat debian/copyright.header COPYING > debian/copyright
-+
-+ touch build-stamp
-+
-+clean: clean1 unpatch
-+clean1:
-+ dh_testdir
-+ dh_testroot
-+ rm -f build-stamp configure-stamp
-+
-+ # Add here commands to clean up after the build process.
-+ -$(MAKE) distclean
-+
-+ dh_clean
-+ rm -rf debian/atm-tools.8 debian/copyright
-+
-+install: build
-+ dh_testdir
-+ dh_testroot
-+ dh_clean -k
-+ dh_installdirs
-+
-+ # Add here commands to install the package into debian/atm-tools
-+ $(MAKE) DESTDIR=`pwd`/debian/tmp install
-+
-+ # manpages
-+ /usr/bin/pod2man --section=8 --release="atm-tools $(PKG_VER)" --lax \
-+ --center="Debian GNU/Linux" debian/atm-tools.pod > debian/atm-tools.8
-+
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/aread.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/awrite.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/enitune.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/ilmid.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/saaldump.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/sonetdiag.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/ttcp_atm.8
-+ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/zntune.8
-+
-+# Build architecture-independent files here.
-+binary-indep: build install
-+ dh_testdir $(dhbuildindeppackages)
-+ dh_testroot $(dhbuildindeppackages)
-+ dh_install $(dhbuildindeppackages)
-+
-+# dh_installdebconf $(dhbuildindeppackages)
-+ dh_installdocs $(dhbuildindeppackages)
-+ dh_installmenu $(dhbuildindeppackages)
-+# dh_installlogrotate $(dhbuildindeppackages)
-+# dh_installemacsen $(dhbuildindeppackages)
-+# dh_installpam $(dhbuildindeppackages)
-+# dh_installmime $(dhbuildindeppackages)
-+ dh_installinit $(dhbuildindeppackages) --init-script=atm -- start 34 0 6 . start 39 S .
-+ dh_installcron $(dhbuildindeppackages)
-+ dh_installman $(dhbuildindeppackages)
-+ dh_installinfo $(dhbuildindeppackages)
-+# dh_undocumented $(dhbuildindeppackages)
-+ dh_installchangelogs -i ChangeLog $(dhbuildpackages)
-+ dh_link $(dhbuildindeppackages)
-+ dh_strip $(dhbuildindeppackages)
-+ dh_compress $(dhbuildindeppackages)
-+ dh_fixperms $(dhbuildindeppackages)
-+ dh_makeshlibs $(dhbuildindeppackages)
-+ dh_installdeb $(dhbuildindeppackages)
-+# dh_perl $(dhbuildindeppackages)
-+ dh_shlibdeps $(dhbuildindeppackages)
-+ dh_gencontrol $(dhbuildindeppackages)
-+ dh_md5sums $(dhbuildindeppackages)
-+ dh_builddeb $(dhbuildindeppackages)
-+
-+# Build architecture-dependent files here.
-+binary-arch: build install
-+ dh_testdir $(dhbuildarchpackages)
-+ dh_testroot $(dhbuildarchpackages)
-+ dh_install $(dhbuildarchpackages)
-+
-+# dh_installdebconf $(dhbuildarchpackages)
-+ dh_installdocs $(dhbuildarchpackages)
-+ dh_installmenu $(dhbuildarchpackages)
-+# dh_installlogrotate $(dhbuildarchpackages)
-+# dh_installemacsen $(dhbuildarchpackages)
-+# dh_installpam $(dhbuildarchpackages)
-+# dh_installmime $(dhbuildarchpackages)
-+ dh_installinit $(dhbuildarchpackages) --init-script=atm -- start 34 0 6 . start 39 S .
-+ dh_installcron $(dhbuildarchpackages)
-+ dh_installman $(dhbuildarchpackages)
-+ dh_installinfo $(dhbuildarchpackages)
-+# dh_undocumented $(dhbuildarchpackages)
-+ dh_installchangelogs -a ChangeLog $(dhbuildarchpackages)
-+ dh_link $(dhbuildarchpackages)
-+ dh_strip $(dhbuildarchpackages)
-+ dh_compress $(dhbuildarchpackages)
-+ dh_fixperms $(dhbuildarchpackages)
-+ dh_makeshlibs $(dhbuildarchpackages)
-+ dh_installdeb $(dhbuildarchpackages)
-+# dh_perl $(dhbuildarchpackages)
-+ dh_shlibdeps -a -L libatm1 -l debian/libatm1/lib $(dhbuildarchpackages)
-+ dh_gencontrol $(dhbuildarchpackages)
-+ dh_md5sums $(dhbuildarchpackages)
-+ dh_builddeb $(dhbuildarchpackages)
-+
-+binary: binary-indep binary-arch
-+.PHONY: build binary-indep binary-arch binary install configure
-+ get-2684 patch unpatch clean1
---- linux-atm-2.4.1.orig/debian/atm-tools-br2684.install
-+++ linux-atm-2.4.1/debian/atm-tools-br2684.install
-@@ -0,0 +1 @@
-+debian/tmp/usr/sbin/br2684ctl usr/sbin
---- linux-atm-2.4.1.orig/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog.Debian
-+++ linux-atm-2.4.1/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog.Debian
-@@ -0,0 +1,206 @@
-+linux-atm (2.4.1-16) unstable; urgency=low
-+
-+ * Fix build problem with gcc 3.4 (Closes: #259422)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Thu, 15 Jul 2004 14:28:10 +0200
-+
-+linux-atm (2.4.1-15) unstable; urgency=low
-+
-+ * Updated descriptions (Closes: #239161)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 4 Apr 2004 21:10:20 +0200
-+
-+linux-atm (2.4.1-14) unstable; urgency=low
-+
-+ * Fix symlink for /usr/lib/libatm.so (Closes: #221011)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 7 Dec 2003 21:53:19 +0100
-+
-+linux-atm (2.4.1-13) unstable; urgency=low
-+
-+ * Previous version fixed #217259, but no changelog entry (Closes: #217259)
-+ * Previous version fixed #216662, but no changelog entry (Closes: #216662)
-+ * Added missing build dependency on automake1.4 (Closes: #221120, #221284)
-+ * New Maintainer (Closes: #206982)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Mon, 17 Nov 2003 23:03:58 +0100
-+
-+linux-atm (2.4.1-12) unstable; urgency=low
-+
-+ * don't build atm-tools-br2684 by default. Thanks to ftpmaster for
-+ not allowing the package to be in Debian.
-+ * Since we don't build atm-tools-br2684 any more, revert back to
-+ autotools output from 2.4.1-9
-+ * Add README.br2684 documenting a way to build the package locally.
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 5 Nov 2003 21:31:42 +0000
-+
-+linux-atm (2.4.1-11) experimental; urgency=low
-+
-+ * Build-Depend on dpatch
-+ * dpatch br2684 header files from later libc for old libc (woody)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 29 Oct 2003 19:05:07 +0000
-+
-+linux-atm (2.4.1-10) experimental; urgency=low
-+
-+ * add br2684 to package (closes: #216663)
-+ * autoreconf to actually build br2684
-+ * have libatm1-dev provide libatm-dev (closes: #216662)
-+ * move lib symlink to libatm1-dev as well (closes: #217259)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 23 Oct 2003 17:55:43 +0000
-+
-+linux-atm (2.4.1-9) unstable; urgency=low
-+
-+ * put libatm1-dev in libdevel (closes: #213170)
-+ * make sure that new descriptions actually make it into the package
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 9 Oct 2003 17:08:10 +0000
-+
-+linux-atm (2.4.1-8) unstable; urgency=low
-+
-+ * build arch-indep package as targets of binary-indep (closes: #212124)
-+ * use dh_installdocs to install files to libatm1-dev/docs
-+ * symlink shared lib to usr/bin (closes: #213146)
-+ * Use better long descriptions. Thanks to Javier (closes: #209427)
-+ Fernandez-Sanguino (closes: #209612)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Sun, 28 Sep 2003 19:29:08 +0000
-+
-+linux-atm (2.4.1-7) unstable; urgency=low
-+
-+ * libatm1 now conflicts with atm-tools (<< 2.4.1-6) (closes: #208170)
-+ * armarp now writes output to stdout.
-+ * add atm-dev as empty transitional package to help upgrades
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 2 Sep 2003 09:20:33 +0000
-+
-+linux-atm (2.4.1-6) unstable; urgency=low
-+
-+ * split off shared libraries to libatm1
-+ * rename atm-dev to libatm1-dev
-+ * Standards-Version: 3.6.1
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 26 Aug 2003 15:46:27 +0000
-+
-+linux-atm (2.4.1-5) unstable; urgency=low
-+
-+ * move *.a and *.la to usr/lib (closes: #199506).
-+ * let atm-dev depend on atm-tools to avoid dangling /lib/libatm.so
-+ symlink.
-+ * Standards-Version: 3.5.6
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 30 Jul 2003 11:46:19 +0000
-+
-+linux-atm (2.4.1-4) unstable; urgency=low
-+
-+ * add Build-Depends: on automake1.4
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 16:58:21 +0000
-+
-+linux-atm (2.4.1-3) unstable; urgency=low
-+
-+ * rebuilding libtool broke src/test/Makefile.in. Applied fix to
-+ Makefile.am and re-built again.
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 11:05:26 +0000
-+
-+linux-atm (2.4.1-2) unstable; urgency=low
-+
-+ * rebuild configure script with new libtool (closes: #196909)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 10 Jun 2003 21:01:50 +0000
-+
-+linux-atm (2.4.1-1) unstable; urgency=low
-+
-+ * new upstream source
-+ * remove atmarp and atmarpd from /usr/sbin as they are already in
-+ /sbin (closes: #196216)
-+ * lintian fixes
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Mon, 9 Jun 2003 16:03:45 +0000
-+
-+linux-atm (2.4.0-5) unstable; urgency=low
-+
-+ * Fix for src/test/Makefile.in to allow building on hppa and ia64
-+ which the fix introduced to 2.4.0-4 broke. Thanks to Goswin
-+ Brederlow.
-+ * Move init.d priority to that atmarpd is started before network
-+ interfaces are started.
-+ * Move atmarpd and libatm to /sbin and /lib to allow atmarpd to be
-+ started before /usr is mounted.
-+ * use dh_install instead of dh_movefiles.
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Sat, 24 Aug 2002 15:13:48 +0000
-+
-+linux-atm (2.4.0-4) unstable; urgency=low
-+
-+ * new maintainer
-+ * Fix for src/test/Makefile.in to allow building on sparc.
-+ Thanks to Patrick Mauritz. (closes: #144225).
-+ * added pseudo-manpage for manpage-less binaries.
-+ * removed rpath by changing configure and make install paramaters
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Fri, 16 Aug 2002 20:39:05 +0000
-+
-+linux-atm (2.4.0-3) unstable; urgency=HIGH
-+
-+ * Re-ran libtoolize.
-+ Closes: #143522
-+
-+ * Previous version Closes: #135328
-+
-+ -- Russell Coker <russell@coker.com.au> Fri, 19 Apr 2002 01:55:00 +0200
-+
-+linux-atm (2.4.0-2) unstable; urgency=HIGH
-+
-+ * Put a "grep -v EMAXERRNO" into the build process to deal with mipsel and
-+ the "#ifdef __KERNEL__" it has in it's /usr/include/asm/errno.h .
-+
-+ -- Russell Coker <russell@coker.com.au> Thu, 18 Apr 2002 19:56:00 +0200
-+
-+linux-atm (2.4.0-1) unstable; urgency=HIGH
-+
-+ * New upstream version which changes source package name.
-+ Closes: #138911
-+
-+ -- Russell Coker <russell@coker.com.au> Mon, 18 Mar 2002 17:42:00 +0100
-+
-+atm (0.79-4) unstable; urgency=low
-+
-+ * Added build-depends on flex.
-+ Closes: #111072
-+
-+ * Made the atm tools use a shared object to save space.
-+
-+ * Fixed the copyright file and put all copyright details in both packages.
-+
-+ * Added support for easy building with different kernel headers.
-+ Closes: #110249
-+
-+ -- Russell Coker <russell@coker.com.au> Sun, 7 Oct 2001 14:11:33 +0200
-+
-+atm (0.79-3) unstable; urgency=low
-+
-+ * Created /etc/init.d/atm to start and stop atmarpd.
-+ Closes: #110252
-+
-+ * Added build-depends on bison.
-+ Closes: #110576
-+
-+ -- Russell Coker <russell@coker.com.au> Fri, 31 Aug 2001 15:21:44 +0200
-+
-+atm (0.79-2) unstable; urgency=low
-+
-+ * Changed the main package name to atm-tools to indicate that it doesn't
-+ provide ATM (gotta have the kernel support), it just has the daemons and
-+ utilities.
-+
-+ -- Russell Coker <russell@coker.com.au> Sat, 25 Aug 2001 17:55:00 +0200
-+
-+atm (0.79-1) unstable; urgency=low
-+
-+ * Initial Release.
-+
-+ -- Russell Coker <russell@coker.com.au> Fri, 24 Aug 2001 17:31:00 +0200
---- linux-atm-2.4.1.orig/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog
-+++ linux-atm-2.4.1/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog
-@@ -0,0 +1,3299 @@
-+Version 2.4.0 to 2.4.1 (25-APR-2003)
-+=====================
-+
-+Bug fixes
-+---------
-+
-+ - vsprintf's changed to vsnprintf's to prevent possible stack overflows
-+
-+
-+Version 0.79 to 2.4.0 (18-OCT-2001)
-+=====================
-+
-+Bug fixes
-+---------
-+
-+ - defined 'now' in src/lib/timer.c
-+ - ia64 build fix for ASN (Chas Williams)
-+
-+Other changes
-+-------------
-+
-+ - In general, the source tree was rearranged and the old cruft was removed
-+ - Old ad hoc build system replaced in favor of a standardized autoconfiscation
-+ - Build configuration options are now controlled by 'configure' script instead
-+ of changes to the previous 'Rules.make' file
-+ - libatm and libatmd merged into one lib: libatm
-+ - Both static and shared libraries are built by default. Binaries now built
-+ with shared library by default.
-+ - Sample atmsigd.conf and hosts.atm are now installed when doing 'make install'
-+ - RPM spec file is now available in src/extra/
-+ - New RedHat init scripts available in src/config/init-redhat/ (John Strange)
-+ (old RedHat 4.0 scripts removed)
-+ - ATM on Linux HOWTO now included in doc/ (much derived from usage.tex). We
-+ will publish this on the home page as well as linuxdoc.org
-+ - tcpdump and libpcap ATM patches/build removed (they have been integrated into
-+ their respective packages; see www.tcpdump.org)
-+ - ATM Name Service (ANS) files coalesced into src/extra/ANS
-+ - ANS bind patch upgraded to bind-4.9.8 (untested)
-+ - rtf2e164_cc.pl removed in favor of src/extra/ANS/pdf2e164_cc.pl. The ITU no
-+ longer provides E.164 country codes in RTF format. PDF used instead.
-+
-+
-+Version 0.78 to 0.79 (15-AUG-2001)
-+====================
-+
-+Bug fixes
-+---------
-+
-+- uni.c fix for newer versions of gcc
-+- mpoad/io.c quick fix for undefined OPEN_MAX
-+
-+
-+Version 0.77 to 0.78 (7-JUL-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - skb_migrate wasn't protected against functions accessing the list via
-+ skb->list
-+ - removal of MOD_xxx races in FORE 200E and atmtcp (by Jeff Garzik)
-+ - CONFIG_ATM_NICSTAR_USE_IDT77105 set NEED_SUNI_MX instead of
-+ NEED_IDT77105_MX (fix from mainstream)
-+ - ambassador.c: changed string concatenation and offset calculation breaking
-+ compilation with gcc 2.96 (by Jakub Jelinek)
-+ - nicstar.c: various locking fixes for SMP (by Rui Prior)
-+ - LANE vs. bridging build conflict solved (from mainstream)
-+ - %%u instead of %u in mpc.c
-+ - fixed formatting of /proc/net/atm/svc
-+ - /proc/net/atm/clip always added + after public address, not only if followed
-+ by private address
-+ - atmsigd now returns EINVAL if attempting to change max_sdu
-+ - atm_change_qos now calls adjust_to for additional parameter checking
-+ - sendmsg now returns error if size > max_sdu (reported by Alan Kennington)
-+ - removed explicit defaults in Config.in (by Christoph Hellwig)
-+ - Fore200E: removed #ifdef MODULE
-+ - ipcommon.c didn't export skb_migrate to modules (by Mitchell Blank)
-+ - ENI: /proc/net/atm/eni:* claimed backlog was in bytes instead of packets
-+ - br, bw, window: changed variables receiving possibly negative return values
-+ from size_t to ssize_t (reported by Alan Kennington)
-+ - LANE: fixed stray errors on lack of ATM address, ATM address change, or ESI
-+ change (by Heikki Vatiainen)
-+ - LANE: could loop forwever when trying to connect to LECS (by Heikki
-+ Vatiainen)
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.4.0-test3-pre4 kernel
-+
-+Other changes
-+-------------
-+
-+ - as_reject now returns the errno value in msg->reply
-+ - removed save_qos hack in svc_change_qos
-+ - atmsigd: sap_encode now always includes both max_sdu fields, even if one
-+ contains the null value for some reason (by Mohsen Souissi)
-+ - PCI updates for Ambassador, FORE 200E, Horizon, Iphase, nicstar, ENI, and
-+ ZATM (by Jeff Garzik)
-+ - removal of unnecessary #ifdef MODULE for nicstar, idt77105, and FORE 200E
-+ (by Jeff Garzik)
-+ - generalized skb_migrate to append to an arbitrary sk_buff list
-+ - iphase.c: timer initialization cleanup (from mainstream)
-+ - clip: dev->name initialization change (from mainstream)
-+ - idt77105: cleaned up timer initialization
-+ - clip.c: some general cleanup
-+ - removed redundant return in clip.c (by Heikki Vatiainen)
-+ - changed atm_change_qos to static
-+ - fore200e.c: re-enabled anti-unloading code
-+ - lec.c: now drops packets on overrun instead of growing infinite queue (by
-+ Heikki Vatiainen)
-+ - COPYING still mentioned the old led code with partial DEC copyright
-+ (reported by Chris Pimlott)
-+ - Horizon: removed const warning by casting to (hrz_flags *)
-+ - Iphase: tried to print unsigned long with %x when errors are enabled
-+ - ENI: eni_send tries to use do_tx instead of tasklet_schedule to reduce delay
-+ - ENI: removed eni_dev->backlog_len (information is already in backlog->qlen)
-+ - changed the kernel source tree references from .gz to .bz2 compression
-+ - changed mkdiff to allow more flexible selection of additional patch
-+
-+
-+Version 0.76 to 0.77 (29-APR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmaddr.8, atmarp.8, atmdump.8, atmloop.8, esi.8 didn't print all options
-+ in bold
-+ - atmsigd crashed if an interface had more than one local ATM address
-+ - atmarpd continued to use VCs after closing if they were closed because
-+ ATMARP_SETENTRY failed (reported by Joseph Gooch)
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.3.99-pre6 kernel
-+
-+Other changes
-+-------------
-+
-+ - CLIP now uses NETDEV_GOING_DOWN instead of NETDEV_DOWN; also avoids
-+ "clip_device_event: unknown event 9" warning
-+ - added ubr:pcr example to qos(7)
-+ - added -V option to atmaddr, atmarp, atmarpd, atmloop, atmsigd, atmtcp, esi,
-+ ilmid
-+ - sock->sk->sleep now points to vcc->sleep (by Alexander Viro)
-+ - CLIP: ATMARP server now reponds to query for local IP address (suggested by
-+ Joseph Gooch)
-+ - updated t2a.pl
-+
-+
-+Version 0.75 to 0.76 (13-APR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ttcp_atm declared port as "short" instead of "unsigned short", yielding
-+ confusing diagnostic output
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.3.99-pre5 kernel
-+
-+Other changes
-+-------------
-+
-+ - eliminated eni_send-tasklet synchronization
-+ - PCA200: merged unconditional #inclusion of linux/pci.h from pre5
-+
-+
-+Version 0.74 to 0.75 (7-APR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ENI: moved send operation into tasklet to correct synchronization (reported
-+ by Heikki Vatiainen)
-+ - MPOA: possible deadlock fix (by Heikki Vatiainen)
-+ - atm_vcc_flags_t was too small on PPC, causing an overlap with vcc->family
-+ (fixed by Chas Williams)
-+ - CLIP: needs spin_lock_irqsave instead of only spin_lock (by Rui Prior)
-+ - CLIP: clip_push may be called from an interrupt, so the kfree_skb has to
-+ become dev_kfree_skb_any (by Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - removed INCLUDES from atm/ilmid/asn1/Makefile (suggested by Jean Marc
-+ Lacroix)
-+ - atm/maint/Makefile no longer special-cases atmdiag.c (suggested by Jean Marc
-+ Lacroix)
-+
-+
-+Version 0.73 to 0.74 (2-APR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atm_poll tried to sleep on two wait queues, which is no longer possible.
-+ Removed vcc->wsleep to solve this. (Reported by Joseph Gooch)
-+ - lec.c:lec_arp_clear_vccs changed the VCC flags of the wrong VCC, fortunately
-+ only in commented-out code
-+ - major revision of MPOA ingress and egress cache locking (Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - removed last remnants of bogus bridging lock from lane_mpoa_init.c
-+ (reported by Heikki Vatiainen)
-+ - removed last traces of TNET1570A driver
-+ - atmdev_init still knew about ENI, but ENI now uses new-style initialization
-+ - improved Fore 200E configuration to catch useless settings already at
-+ configuration time (by Christophe Lizzi)
-+
-+
-+Version 0.72 to 0.73 (29-MAR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ambassador.c and horizon.c had module loading races (fixed by Giuliano
-+ Procida)
-+ - fore200e: one set_bit was accidently converted to clear_bit, preventing VCs
-+ from being opened (fixed by Christophe Lizzi)
-+
-+Other changes
-+-------------
-+
-+ - fore200e: moved interrupt handler work to tasklet (by Christophe Lizzi)
-+ - fore200e: fixed SBUS DMA direction flags (by Christophe Lizzi)
-+ - fore200e: the compile no longer fails when the driver is compiled without
-+ any hardware support (and displays a warning; by Christophe Lizzi)
-+ - oops, atm/README was lagging behind a few versions
-+
-+
-+Version 0.71 to 0.72 (25-MAR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - fore200e.h and lec.h didn't #include <linux/config.h> (fixed by David S.
-+ Miller ?)
-+ - atmloop.c always assumed -q to be present
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.3.99-pre3 kernel
-+
-+Other changes
-+-------------
-+
-+ - kernel patch still included wd.c hack (reported by David S. Miller)
-+ - removed bogus initialization of skb->rx_dev (spotted by Alexey Kuznetsov)
-+ - removed bogus lane_bridge_hook_lock (by Heikki Vatiainen)
-+ - added sparc64 support for ATM_QUERYLOOP (by Christophe Lizzi)
-+ - minor Fore driver cleanup (by Christophe Lizzi)
-+ - eni.c: moved interrupt handler work to tasklet
-+
-+
-+Version 0.70 to 0.71 (21-MAR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - eni.c: fixed potential SMP deadlock on tx_wait
-+ - clip.c and lec.c didn't initialize skb->rx_dev
-+ - net/atm/svc.c:svc_connect left wait entry in queue on return in some cases
-+ - idiot bug in skb_migrate caused weird crashes
-+ - atmloop usage erroneously claimed -s was optional
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.3.99-pre2 kernel
-+ - added atmloop.8 man page
-+ - added enqueuing result NET_XMIT_BYPASS for qdiscs that send packets on a
-+ path without dequeue (e.g. sch_atm)
-+
-+Other changes
-+-------------
-+
-+ - ambassador.c: removed warnings when compiling with CONFIG_SMP (by Giuliano
-+ Procida)
-+ - changed drivers/atm target from atm.a to atm.o, to make initcalls work
-+ - converted eni.c to use pci_register_driver and initcall
-+ - cleaned up #ifdef hell in net/atm/signaling.c:sigd_put_skb
-+
-+
-+Version 0.69 to 0.70 (20-MAR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - LEC compilation as a module still left it in the kernel
-+
-+Other changes
-+-------------
-+
-+ - moved LANE-bridging interface code from lec.c to lane_mpoa_init.c (by
-+ Heikki Vatiainen)
-+ - made SONET and ATM statistics counters atomic to avoid cli() when reading
-+ (not updated: similar mechanism in idt77105.c and private shadow statistics
-+ of ambassador.c)
-+ - changed access to VCC and device flags (ATM_VF_* and ATM_DF_*) to bit set
-+ operations
-+ - changed flag types to structs to fail compilation of old code
-+ - changed last argument of atm_dev_register to a pointer to a bit set for
-+ easier migration
-+ - net/atm/*.c: eliminated all sleep_on and cli (except in lec.c)
-+ - ditto for eni.c and suni.c
-+ - corrected indentation of some "permanent" debugging code in zatm.c
-+ - made skb_migrate partially atomic, obsoleting yet another cli() in clip.c
-+
-+
-+Version 0.68 to 0.69 (19-MAR-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ambassador.c: corrected location of initial PLX window for use on Alpha (by
-+ Giuliano Procida)
-+ - zeppelin: fixed address initialization (found by Christophe Lizzi)
-+ - atmsigd.conf man page erroneously described the option "q.2963.1" as
-+ "q2963_1"
-+ - LANE didn't compile when bridging was enabled (fixed by Heikki Vatiainen;
-+ note that bridging also needs an update which is being merged via the
-+ mainstream kernel)
-+
-+New features
-+------------
-+
-+ - atmsigd: added command-line option -u to set the UNI mode
-+ - added ioctl ATM_QUERYLOOP to determine supported loopback modes
-+ - added atmloop(8) option -q
-+
-+Other changes
-+-------------
-+
-+ - added CREDITS entry of Giuliano Procida
-+ - various cosmetic changes to horizon.c (by Giuliano Procida)
-+ - ambassador.c: various bits of cleanup (by Giuliano Procida)
-+ - added -S <tos> option to ttcp_atm to set the IPv4 TOS byte (this is not
-+ really related to ATM)
-+ - changed loopback mode values to a bit set
-+ - idt77105_ioctl: returned sizeof(int) instead of 0 on ATM_GETLOOP
-+ - added phy_ops->stop to suni.c and uPD98402_stop, cleaned up suni.c in the
-+ process
-+ - removed (very obsolete) mmuio.o from net/atm/Makefile
-+
-+
-+Version 0.67 to 0.68 (28-FEB-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - removed potential dev_kfree_skb(NULL) from *_send of eni.c, zatm.c, iphase.c
-+ - eni.c, zatm.c, iphase.c sometimes returned PCI error codes instead of errno
-+ codes
-+ - arpd/io.c could try to de-reference entry->addr with addr == NULL (fixed by
-+ Thomas Dietz)
-+ - LANE copied more than dev->addr_len address bytes (fixed by Heikki
-+ Vatiainen)
-+ - sch_atm didn't remove filters on destroy
-+ - fixed typo in esi.c error message
-+ - esi.8 claimed to be the man page of atmarp, and it wasn't installed
-+ - added checking for VPI/VCI when sending AAL0 cells (by Mitchell Blank)
-+ - atmtcp allowed sending on receive-only VCs
-+ - various ioctl permission checks were missing (fixed by Mitchell Blank)
-+ - fore200e.c and horizon.c didn't always free skbs on send error (fixed by
-+ Mitchell Blank)
-+ - included an ugly hack to fix the wd.c driver that was broken around 2.3.47
-+ (not related to ATM at all...)
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.3.48 kernel
-+ - added device-independent SAR/PHY loopback setting interface (with many good
-+ ideas from Greg Banks and Mitchell Blank), and removed old loopback ioctls
-+ - new utility atmloop to set loopback mode
-+ - added "stop" to atmphy_ops (requested by Mitchell Blank)
-+
-+Other changes
-+-------------
-+
-+ - mkdiff can now also use pre-release kernels
-+ - changed *kfree_skb to dev_kfree_skb_{irq,any} in eni.c, zatm.c, and raw.c,
-+ where necessary (with help from Heikki Vatiainen)
-+ - changed {dev_,}kfree_skb to dev_kfree_skb_any in ambassador.c, horizon.c,
-+ iphase.c, and nicstar.c (needs further cleanup)
-+ - softnet updates for LANE (by Heikki Vatiainen)
-+ - fixed firmeware license of Fore 200E driver and general 0.46/0.47 updates
-+ (Christophe Lizzi)
-+ - more CREDITS file additions
-+ - softnet updates for sch_atm
-+ - softnet updates for CLIP (also cleaned up flow control for > 1 VCC/itf;
-+ reported by Alexey Kuznetsov)
-+ - updated documentation for iproute2-2.2.4-now-ss000225 and streamlined the
-+ build procedure
-+ - PCI DMA updates for ENI driver
-+ - changed the default install location of executables and man pages from
-+ /usr/local to /usr
-+ - make install no longer installs align, aping, br, bw, delay, isp, svctor,
-+ sw_debug, sw_tcp, swc, and window
-+ - eni.c: made highly controversial aal5 = ... line more readable
-+ - moved /proc/atm to /proc/net/atm
-+ - added vcc->send function to allow for AAL-specific processing (may be set
-+ to dev->ops->send)
-+ - atm_do_connect_dev now calls bind_vcc before AAL initialization to make
-+ vcc->dev available
-+ - change_qos no longer allows changing of AAL or traffic class (by Mitchell
-+ Blank)
-+ - changes for new loopback support to fore200e driver and sparc64 code (by
-+ Christophe Lizzi)
-+
-+
-+Version 0.66 to 0.67 (2-FEB-2000)
-+====================
-+
-+New features
-+------------
-+
-+ - upgraded to 2.3.42
-+ - added sunimode utility to set SUNI loopback mode (by Christophe Lizzi)
-+
-+Other changes
-+-------------
-+
-+ - removed unused variable warning in net/sched/sch_atm.c
-+ - changed ENI_SETMULT from ATMIOC_SARPRV+1 to ATMIOC_SARPRV+7
-+ - changed atmarpd's complaint about VCC-less non-ATMARP-server entries from
-+ DIAG_ERROR to DIAG_INFO (the condition is okay for an ATMARP server)
-+
-+
-+Version 0.65 to 0.66 (31-JAN-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmsigd crashed on reception of as_accept, etc., because of inverted NULL
-+ pointer test (reported by Kevin Vargo, Rui Prior, fixed by Julian Cable)
-+ - fixed various SPARC build problems (by Christophe Lizzi)
-+ - atmsigd insisted that calling party number is local in switch mode
-+ - debug switch didn't initialize any ports
-+ - net/atm/signaling.c:sigd_enq didn't properly zero the message, yielding
-+ kernel pointers partially containing junk
-+ - accept(2) didn't copy local ATM address to VCC descriptor (reported by
-+ Pedro Brandao)
-+ - ilmid/io.c didn't compile on SPARC (reported by Christophe Lizzi)
-+ - usage.txt didn't define the %: macro, leaving garbage in usage.txt
-+
-+New features
-+------------
-+
-+ - upgraded to 2.3.41
-+ - Fore 200E driver now also works for SBA-200E (by Christophe Lizzi)
-+
-+Other changes
-+-------------
-+
-+ - added various CREDITS entries
-+ - changed TIOC{IN,OUT}Q to SIOC{IN,OUT}Q (no user space rebuild required;
-+ the values are identical)
-+ - added script atm/switch/tcp/mkfiles for automatic extraction of
-+ configuration files
-+ - atmsigd called ATM_GETLINKRATE "ATM_GETLINERATE" in complaints
-+ - atmsigd tried to obtain link speed in switch mode, although it's not used
-+ - Ambassador NIC: various files still had the wrong copyright/licensing text
-+ (patch by Giuliano Procida)
-+
-+
-+Version 0.64 to 0.65 (21-JAN-2000)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - fixed 32/64 bit %p formatting problem in /proc/atm/vc
-+ - atmtcp: fixed RX/TX statistics (by Jens Axboe)
-+ - sparc64-specific ioctl 32/64 bit marshalling fixes (by Christophe Lizzi,
-+ with further improvements by Jens Axboe)
-+ - zeppelin -l option handling (reported by Mike Prudence, fixed by Heikki
-+ Vatiainen)
-+ - mkpatch didn't include drivers/atm/eni.h
-+ - updated eni.h (tx->backlog_len was missing)
-+ - fixed various uint32_t build problems of user space tools by including
-+ atm.h before anything other ATM headers (first reported by Rashmi Dravid)
-+ - "natmtcp virtual" didn't parse the command line properly
-+ - natmtcp's TCP link changed VPI/VCI to 0.0 on close
-+ - CLIP: fixed crash after sending ARP (reported by Rui Prior)
-+
-+New features
-+------------
-+
-+ - upgraded to 2.3.40 (with help from Jens Axboe)
-+ - added sparc64 changes for ENI driver (by Heikki Vatiainen)
-+ - added the Fore PCA-200E(/SBA-200E) driver (by Uwe Dannowski and Christophe
-+ Lizzi)
-+ - added the Interphase ATM PCI (i)Chip (x575, x525, x531, etc.) driver (by
-+ Monalisa Agrawal and Peter Wang)
-+ - added ABR fields to struct atm_trafprm (by Peter Wang)
-+ - nicstar driver now supports setting of the CLP bit (by Rui Prior)
-+ - added ENI_SETMULT ioctl and enitune utility to change ENI buffer size
-+ multipliers at run time
-+
-+Other changes
-+-------------
-+
-+ - atmsigd: changed default UNI version from 3.0 to dynamic (which defaults
-+ to 3.0)
-+ - atmtcp: removed ugly ../../net/atm/protocols.h include
-+ - ioctls now internally return -ENOIOCTLCMD if ioctl command number is not
-+ recognized
-+ - removed ATM_CREATE_LEAF ioctl (wasn't used and suggested the wrong design
-+ approach anyway)
-+ - updated README.DRIVERS
-+ - natmtcp now uses port 2812 (assigned by IANA)
-+ - moved Documentation/atm.txt to Documentation/networking
-+ - improved atm_kptr_int_t for non-Sparc architectures (by Christophe Lizzi)
-+ - removed two compiler warnings from nicstar.c
-+ - some minor nicstar cleanup (by Rui Prior)
-+ - added "vbr" and "abr" to text2qos/qos2text ("vbr" not used for anything
-+ right now)
-+ - natmtcp: added commands "create", "remove", "switch", corresponding to
-+ options -p, -r, and -s of atmtcp
-+ - natmtcp: added link type "print" (write PDU content to stdout)
-+ - natmtcp: now uses atm_kptr_int_t for VCC kernel pointer instead of unsigned
-+ long
-+ - added apologetic man page for natmtcp
-+ - renamed natmtcp to atmtcp and removed the old atmtcp
-+ - changed some user-space code to avoid patronizing "ambiguous `else'"
-+ warnings from egcs, adding as few ugly redundant curly braces as possible
-+ - fixed some other compiler warnings
-+ - kernel part: trimmed operations structure initializers which consisted
-+ mainly of NULL pointers
-+ - kernel pointers sent as opaque references to user space are now of type
-+ atm_kptr_t. Added support functions kptr_eq and kptr_print. (With help from
-+ Richard Johnson and Mitchell Blank)
-+ - removed various "overriding commands" warnings in user-space build process
-+ - mkdist now creates arcvie in current directory if ~/l/arch doesn't exist
-+ - make clean && make now works also if dependencies are present (make clean
-+ used to remove sigd/q.out.h, which the dependencies required)
-+ - atmtcp uses command bg instead of -b for backgrounding. Also, listen-bg
-+ listens and backgrounds before calling accept.
-+
-+
-+Version 0.63 to 0.64 (1-DEC-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmapi.h logic was still wrong (fixed by Christophe Lizzi)
-+ - LANE: fixed BUS filtering and net/atm/lec.c cleanup (by Heikki Vatiainen)
-+ - arpd/io.c assumed that diag() preserves errno
-+ - atmarpd didn't include QOS in output if getsockopt failed
-+
-+New features
-+------------
-+
-+ - /proc/atm/eni:* now also shows transmit queue and backlog length
-+ - added option "sndbuf" to atmarp
-+ - added option "sndbuf" to tc ... atm ...
-+ - /proc/atm/vc lists internal details for all VCs (flags, buffers, etc.);
-+ added ATM_VF2TXT_MAP to atmdev.h to allow translation of flag values
-+
-+Other changes
-+-------------
-+
-+ - ATM now uses sk->sndbuf/rvcbuf instead of atm_vcc->tx_quota/rx_quota
-+ - removed rx_quota hack from zatm.c
-+ - removed net/atm/tunable.h
-+ - CLIP and sch_atm now only send packets if the VC's send queue allows them to
-+ - implemented correct "requeue" function in sch_atm
-+ - updated zeppelin(8) man page (Heikki Vatiainen)
-+ - atmarp: atmarp -q qos_spec usage is obsolete; use atmarp -q qos qos_spec
-+ instead
-+ - /proc/atm/svc now prints "N/A@xxxxxxxx" instead of "Unassigned", with the
-+ address of the descriptor in xxxxxxxx
-+ - removed all traces of CONFIG_MMU_HACKS
-+ - obsoleted ATM_SETSC (single-copy control)
-+
-+
-+Version 0.62 to 0.63 (22-NOV-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - horizon.c: cleared weird rate_lock/rates_lock patch conflict
-+ - saaldump output formatting was completely wrecked; added option -q for
-+ "quiet" output (no Q.2931 printing)
-+ - fixed LANE Ethernet interface MTU mapping (patch by Rob Scott)
-+ - atmsigd incorrectly rejected CONNECTION AVAILABLE (Q.2963.1)
-+ - SVC address was wrong in /proc/atm/arp if using private and public part
-+ - RESTART ACKNOWLEDGE was not sent with the correct global call reference
-+ value (reported by Peter Ryan)
-+ - zatm: usec timestamps need 64 division of x86, so this option must be
-+ unavailable on other architectures (reported by Matti Aarnio)
-+ - nicstar: added "fix3" and "fix4" (by Rui Prior)
-+ - LANE: non-proxy didn't filter packets coming from BUS (fix by Marko Kiiskila
-+ and Heikki Vatiainen)
-+
-+New features
-+------------
-+
-+ - upgraded to kernel version 2.3.28
-+ - atmtcp now reports VC open/close and generates timestamps (Note: the
-+ protocol used between the kernel and the atmtcp utility has changed)
-+ - new utility "natmtcp" which combines the ATMTCP protocol, ATMTCP ("virtual")
-+ interfaces, "real" ATM interfaces, and log files (experimental)
-+ - added ILMI 4.0 MIB variables atmfPortMyIdentifier and atmfMySystemIdentifier
-+ (by Thomas Seidel)
-+ - zeppelin: new command line option -I to select interface, allowing the use
-+ of LANE with multiple physical interfaces (by Heikki Vatiainen)
-+ - UltraSparc (sparc64) support (by Christophe Lizzi)
-+ - nicstar: added IDT77105 PHY support (by Greg Banks)
-+ - added utility loop25 to control ForeRunner LE loopback mode (by Greg Banks)
-+ - added support for DNS lookup of NSAP addresses (by Rui Prior)
-+ - added utility debug/dnstest (by Rui Prior)
-+
-+Other changes
-+-------------
-+
-+ - net/atm/tunable.h cleanup
-+ - removed SO_BCTXOPT, SO_BCRXOPT, and struct atm_buffconst
-+ - removed obsolete field "next" from struct atm_blli
-+ - changed potentially unaligned 32 bit accesses in SAAL to use read_netl
-+ (spotted by Christophe Lizzi)
-+ - added __attribute__ ((aligned(8))) to many structures containing structures
-+ which are shared by kernel and user space to enfore uniform packing on
-+ sparc64 (with help from Christophe Lizzi)
-+ - changed unsigned long to unsigned int at API for compatibility with
-+ architecture where sizeof(long) differs between user and kernel space
-+ (e.g. sparc64; suggested by Christophe Lizzi)
-+ - changed struct atmsvc_msg.{vcc,listen_vcc} from unsigned long to new type
-+ atm_kptr_int_t; changed atmsigd accordingly (NB: debugging output may strip
-+ upper bits)
-+ - changed various casts pointer->int to pointer->long->int (where the pointer
-+ does indeed only contain an int, e.g. in ioctl) for Alpha (reported by
-+ Matti Aarnio)
-+ - nicstar: changes card->membase from u32 to unsigned long
-+ - added __attribute__ ((unused)) to mpc.c and mpoa_caches.c to remove
-+ warnings about variables used only for debugging
-+ - drivers/atm/Config.in: changed ! "$foo" = "x" to "$foo" != "x"
-+
-+
-+Version 0.61 to 0.62 (27-AUG-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - lib/diag.c:set_logfile didn't set log_to_initialized (reported by Lars
-+ Burgstahler)
-+ - sch_atm did not use classifiers attached to the x:0 class (reported by Lars
-+ Burgstahler)
-+ - net/atm/atm_misc.c EXPORT'ed atm_return, which is an inline function (fixed
-+ by Mitchell Blank)
-+ - work-around for SO_LEVEL range problems (by Mitchell Blank)
-+ - nicstar oops fix (by Rui Prior and John Brosnan)
-+ - nicstar should now work also as non-module (by Rui Prior)
-+ - nicstar fix for chip bug showing up on 64-bit CPCI bus systems (by Jay
-+ Talbott)
-+ - cleared confusion about inclusion of suni.o when building both nicstar and
-+ ENI
-+ - suni.c now always exports suni_init
-+ - various fixes and cleanups in the Madge drivers (by Giuliano Procida)
-+ - fixed new set of atm_pdu2truesize problems by introducing atm_alloc_charge
-+ which handles the allocation too (problem report and work-around by Alexey
-+ Kuznetsov)
-+ - getsockname on unbound PVC socket caused an oops
-+ - LANE: Token Ring source route bridge support fix (by Heikki Vatiainen)
-+
-+New features
-+------------
-+
-+ - upgraded to kernel version 2.3.15 (mainly by Alexey Kuznetsov and Mitchell
-+ Blank)
-+ - new socket option SO_ATMPVC to retrieve the "PVC" address (PVC & SVC) (based
-+ on a patch by Jay Talbott)
-+ - zeppelin -l now also accepts only the selector byte (by Robert Slaski)
-+
-+Other changes
-+-------------
-+
-+ - removed obsolete drivers/atm/nicstar.c.old_skb
-+ - removed all references to Arequipa (obsolete)
-+ - SO_BCTXOPT/SO_BCRXOPT are now obsolete, given that the final verdict on page
-+ flipping has been spoken in linux-kernel
-+ - interface statistics are now counted in struct net_device_stats instead of
-+ struct enet_statistics (by Mitchell Blank)
-+ - added pointer to mailing list to Documentation/atm.txt
-+ - Documentation/Configure.help now points to Documentation/atm.txt instead of
-+ directly to the Web page.
-+ - usage.tex: clarified the consequences of interrupting atmtcp
-+ - changed the highly misleading "atmarpd:ITF: no such interface" message to
-+ DIAG_DEBUG
-+
-+
-+Version 0.60 to 0.61 (11-JUN-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - nicstar: driver sometimes crashed when starting for 25 Mbps cards (Rui
-+ Prior)
-+ - Zeitnet driver: uPD98402.c wasn't compiled with -DEXPORT_SYMTAB when
-+ building as a module
-+ - net/atm/raw.c didn't export atm_init_aal5, so ATMTCP didn't load as a module
-+ - atmtcp could still be accessed after loading and then unloading, yielding an
-+ Oops
-+
-+Other changes
-+-------------
-+
-+ - PPC configuration now also includes ATM (Jay Talbott)
-+ - lots of cleanup in the Madge drivers (Giuliano Procida)
-+ - tamed down a bit the tone in README
-+
-+
-+Version 0.59 to 0.60 (3-JUN-1999)
-+====================
-+
-+New features
-+------------
-+
-+ - upgraded to kernel version 2.3.3 (main change is slightly different wait
-+ queue handling; affects all drivers)
-+
-+Other changes
-+-------------
-+
-+ - mkdiff script now takes .bz2 kernel if no .gz can be found
-+ - made a few changes to the Madge drivers to reduce the number of warnings
-+
-+
-+Version 0.58 to 0.59 (3-JUN-1999)
-+====================
-+
-+New features
-+------------
-+
-+ - upgrade to kernel version 2.2.9
-+ - zeppelin now adjusts MTU when joining ELAN (Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - adjusted tr interface name limit to 8 characters (down from a wasteful 9)
-+
-+
-+Version 0.57 to 0.58 (3-JUN-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ENI drivers sometimes directly dereferenced pointers instead of using readl/
-+ writel (fixed by Mitchell Blank)
-+ - nicstar driver no longer uses floating point (fixed by Rui Prior)
-+ - nicstar driver may have refused CBR VC in some cases even with enough
-+ bandwidth available (fixed by Rui Prior)
-+ - usage.tex failed to build (fixed by Bill Brooks)
-+ - zeppelin got byte order in BLLI wrong (reported by Chas Williams; fixed by
-+ Mitchell Blank and Heikki Vatiainen)
-+ - zeppelin did not work when the host had multiple ATM addresses (reported by
-+ Benoit Steiner; fixed by Heikki Vatiainen)
-+ - zeppelin incorrectly parsed -i command line option (reported by Benoit
-+ Steiner; fixed by Heikki Vatiainen)
-+ - atm_connect_vcc and /proc/atm/pvc report AAL0 now properly (reported by Zhu
-+ Qun Ying and Uwe Dannowski)
-+
-+New features
-+------------
-+
-+ - nicstar driver now support SONET diagnostics (by Rui Prior)
-+ - nicstar driver now works on PowerPC (by Jay Talbott)
-+ - LANE now also supports Token Ring (Heikki Vatiainen, with testing by
-+ Holger Smolinski)
-+
-+Other changes
-+-------------
-+
-+ - major non-i386 architecture and other cleanup in ENI driver (by Mitchell
-+ Blank)
-+ - number of lec devices is 40+8 (lec0-lec39 are Ethernet and lec40-lec47 are
-+ Token Ring; Heikki Vatiainen)
-+ - lec.c and mpc.c now use atm_force_charge (Heikki Vatiainen)
-+ - net/802/tr.c limited interface names to 4 characters (fixed by Heikki
-+ Vatiainen)
-+ - zeppelin man page updated (Heikki Vatiainen)
-+ - "zeppelin.new" is now "zeppelin", the old "zeppelin" is gone
-+ - set "atm_connect" printk to KERN_DEBUG
-+ - removed ATM_SAAL from include/linux/atm.h (there never was any support for
-+ SAAL in the kernel)
-+
-+
-+Version 0.56 to 0.57 (18-MAY-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmarpd complained "invalid control msg type" when changing interface
-+ characteristics (reported by Soo-Khim Ho)
-+ - sch_atm didn't compile without CLIP (reported by Zhu Qun Ying)
-+ - LANE & MPOA: plugged a few memory leaks after failure to atm_charge (Heikki
-+ Vatiainen)
-+ - mpcd could not be killed if MPS's address was not known (fixed by Heikki
-+ Vatiainen)
-+ - nicstar: fixed the sleeping in interrupt issue (Rui Prior)
-+
-+New features
-+------------
-+
-+ - drivers for the Madge "Ambassador" and "Horizon [Ultra]" NICs, also known
-+ as Collage PCI 155 Server, 25, and 155 Client (by Giuliano Procida)
-+
-+Other changes
-+-------------
-+
-+ - MPOA code cleanup and debugging printks are now conditional (Heikki
-+ Vatiainen)
-+ - removed both led/USAGE files
-+ - removed the old atmsigd (was in atm/sig.old/)
-+ - nicstar driver now works around TSQ bug on older chips (77201) (by Rui
-+ Prior, with the detective work by Jay Talbott)
-+
-+
-+Version 0.55 to 0.56 (22-APR-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atm/doc/Makefile assumed . to be included in PATH when invoking rlatex
-+ (fix by Heikki Vatiainen)
-+ - usage.txt leaked Arequipa configuration examples (fix by Heikki Vatiainen)
-+ - plugged a small memory leak in led.new which occurred when using the LANE
-+ client as a proxy (Heikki Vatiainen)
-+ - atmarpd crashed when printing ATMARP table entries with flag 0x8000 set
-+ (reported by Vinay Kulkarni)
-+ - CLIP interfaces now follow netmask changes
-+ - Nicstar: 25.6 Mbps cell rate corrected (by Rui Prior)
-+ - atm_equal could loop forever when comparing NSAP-encoded E.164 addresses
-+ (reported by Valley Zhizhkun)
-+ - [AP]F_ATM[PS]VC definitions in lib/atm.h conflicted with glibc 2.1
-+ (reported by Heikki Vatiainen and Jens Vagelpohl)
-+ - changed a few non-int main to int main (reported by Heikki Vatiainen)
-+ - changed lib/diag.c work with glibc 2.1, where stderr is no longer a constant
-+ (based on a patch by Heikki Vatiainen, also reported by Giuliano Procida)
-+ - make clean didn't remove qgen/q.test.c, qgen/qd.out.h, qgen/qd.test.c,
-+ sigd/q.out.h and sigd.old/q.out.h (reported by Giuliano Procida)
-+ - optional headers were installed even with system headers present if
-+ INSTROOT was different from / (reported by Giuliano Procida)
-+ - lib/stdint.h was used even on systems that had a "real" stdlib.h (based on a
-+ patch by Heikki Vatiainen, also reported by Giuliano Procida)
-+ - renamed net/atm/misc.c to atm_misc.c to avoid name clash with
-+ drivers/char/misc.c on include/linux/modules/misc.* (reported by Borek
-+ Lupomesky)
-+
-+New features
-+------------
-+
-+ - new ioctl ATM_GETLINKRATE to query link rate of an interface (suggested by
-+ Vitaly Lavrov)
-+ - new atmsigd.conf option io max_rate to specify rate to signal if
-+ application requests the "maximum"
-+ - added decription of CONFIG_ATM_LANE and CONFIG_ATM_MPOA to the kernel
-+ configuration help (Heikki Vatiainen)
-+ - added description of LANE to usage.tex (Heikki Vatiainen)
-+ - new function atm_force_charge to unconditionally add data to a receive
-+ buffer
-+
-+Other changes
-+-------------
-+
-+ - atmsigd now determines maximum link rate by querying interfaces (suggested
-+ by Vitaly Lavrov)
-+ - moved local address registry from a global table to VPCI structures
-+ - changed unknown net device notification severity from KERN_ERR to
-+ KERN_WARNING
-+ - atmarpd now overwrites old atmarpd.table on startup (it used to keep it
-+ until the first configuration change)
-+ - shutdown(2) of native ATM VCs now returns 0 instead of -EOPNOTSUPP
-+ (suggested by Mitchell Blank)
-+ - Nicstar: IRQ sharing is now allowed (by Rui Prior)
-+ - Nicstar: default maximum number of cards is now 4 (by Rui Prior)
-+ - Nicstar: when compiled as a module, the driver may no longer be removed
-+ while in use (by Rui Prior)
-+ - Nicstar: loss of cells is no longer reported as a plain CRC error (by Rui
-+ Prior)
-+ - atmsigd now always clears the endpoint reference flag if in UNI 3.0 mode
-+ (based on a patch by Heikki Vatiainen)
-+
-+
-+Version 0.54 to 0.55 (1-MAR-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - SELECT_TOP_PCR didn't take intro account the "pcr" field, causing SVC with
-+ QoS pcr=xxx to be set up at link speed
-+ - qos_equal didn't detect differences in the "pcr" fields
-+ - sch_atm only accepted parent == root or absent (reported by John Loughney)
-+ - sch_atm:atm_tc_put accessed flow structure after kfree'ing it
-+ - sch_atm:atm_tc_change didn't put excess traffic class if class creation
-+ failed
-+ - sch_atm:atm_tc_dump_class didn't return class ID in tcm->tcm_handle
-+ - sch_atm:atm_tc_delete refused to delete classes because it expected
-+ ref == 1, but ref == 2 (reported by John Loughney)
-+
-+
-+Version 0.53 to 0.54 (19-FEB-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - led.new: fixed build problem and warning (Heikki Vatiainen)
-+ - fixed LANE arp cache timeouts (Heikki Vatiainen)
-+ - ilmid -i option fell through into -l, causing logging to go into a file
-+ named after the local address
-+ - flipping the highest bit of ep_ref made it negative which was erroneously
-+ interpreted to mean "absent" (reported by Giuliano Procida and Chas
-+ Williams)
-+ - ilmid used the result of AsnOidCompare inconsistently, causing network
-+ prefix registration to fail with some switches (based on a patch by Giuliano
-+ Procida)
-+
-+New features
-+------------
-+
-+ - tc:q_atm: new option "clip" to select Classical IP processing of inbound
-+ traffic
-+ - new sch_atm class attribute TCA_ATM_STATE to retrieve VC state
-+
-+Other changes
-+-------------
-+
-+ - led.new: improved handling of LANE flush protocol (Heikki Vatiainen)
-+ - copied USAGE from led/ to led.new/
-+ - added description of ilmid options -i and -u to USAGE (Heikki Vatiainen)
-+ - ilmid -u now also works without -DDYNAMIC_UNI (all values but the default
-+ are refused)
-+ - tcpdump patch updated to tcpdump version 3.4 (Heikki Vatiainen)
-+ - updated "tc" patch to iproute2 version 2.1.99-now-ss990203
-+
-+
-+Version 0.52 to 0.53 (9-FEB-1999)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmsigd: selecting the UNI version via compile-time options didn't yield
-+ the desired result in some cases (reported by Vinay Kulkarni and others)
-+ - ATM VCCs now use struct sock, as required by protocol-independent layer
-+ starting with recent 2.1 kernels (by Mitchell Blank)
-+ - led fixes: htons/htonl bugs in LANEv2 code, one duplicate close() removed
-+ (by Heikki Vatiainen)
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.2.1 kernel (by Mitchell Blank)
-+ - LANE: added bridging support (by Heikki Vatiainen)
-+ - complete rewrite of led (in led.new), which is now leaner and no longer
-+ contains code (c) Digital (by Heikki Vatiainen)
-+ - added macros for local AESA format and group addresses, and support in
-+ atm2text (by Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - ENI: buffer sizes are now limited to MID_MAX_BUF_SIZE even if max_sdu >
-+ MID_MAX_BUF_SIZE/3 (reported by Andrew Lunn)
-+ - plenty of NICStAR changes (Rui Prior and Mitchell Blank)
-+ - LANE interface to upper layer looks more like Ethernet, so adding bridge and
-+ 802.1Q support is easier, and tcpdump does not need any extra patches (by
-+ Heikki Vatiainen)
-+
-+
-+Version 0.51 to 0.52 (5-DEC-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmsigd crashed when receiving STATUS ENQUIRY for call in Null state
-+ (reported by Heikki Vatiainen)
-+ - outbound endpoint reference didin't have the 16th bit toggled (fixed by
-+ Andrew Lunn)
-+ - lec.c: fixed a bug in kernel which could cause kernel part to deadlock when
-+ signalling was not started successfully (by Heikki Vatiainen)
-+ - MPOA: bug fixes and other changes, see atm/mpoa/CHANGELOG (by Heikki
-+ Vatiainen)
-+
-+New features
-+------------
-+
-+ - LANE: both kernel & daemon: support for ELANs which have MTUs greater than
-+ 1516 (by Eric H. Kinzie)
-+ - MPOA: can now ask LECS for configuratino information (by Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - zeppelin.8: updated (Heikki Vatiainen)
-+
-+
-+Version 0.50 to 0.51 (6-NOV-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmsigd: typo prevented kernel.c from compiling with UNI30 disabled (fix by
-+ Andrew Lunn and Uwe Dannowski)
-+ - option -u crashed ilmid (reported by Michael Wolf)
-+
-+Other changes
-+-------------
-+
-+ - bearer capability is now set to "CBR" for CBR (suggested by Heikki
-+ Vatiainen)
-+
-+
-+Version 0.49 to 0.50 (3-NOV-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmsigd didn't compile for -DUNI31 -DALLOW_UNI30 (fixed by Richard Gooch)
-+ - atmsigd crashed on as_bind and also had problems with as_connect after
-+ as_bind (reported by Heiko Krupp, Heikki Vatiainen, and many others)
-+
-+Other changes
-+-------------
-+
-+ - atmsigd now enables tracing by default (use -t 0 to turn it off)
-+ - added "terminate" message to test/isp
-+ - mpoad defaults to UBR if service category is absent (by Heikki Vatiainen)
-+ - LANE now avoids blocking intact connections when other connections have
-+ problems by queuing packets independently per destination while waiting for
-+ a connection (by Heikki Vatiainen)
-+
-+
-+Version 0.48 to 0.49 (1-NOV-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - q_atm.c passed TCA_ATM_EXCESS even if zero, while the kernel expected it
-+ to be absent in this case (changed q_atm.c)
-+ - q_atm: tc class show didn't separate fields properly with blanks
-+ - removed double inclusion of atm/config from mkdist
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.1.126 kernel
-+
-+Other changes
-+-------------
-+
-+ - "new" atmsigd is now the default (atm/sigd got renamed to atm/sigd.old,
-+ atm/sigd.new to atm/sigd)
-+ - updated extra/tc/README
-+
-+
-+Version 0.47 to 0.48 (30-OCT-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ilmid didn't recognize the -u option
-+ - ATM_GETCIRANGE copied wrong amount of data (fix by Heikki Vatiainen)
-+ - sch_atm didn't compile without policing enabled (reported by Calin Poenaru)
-+ - BHLI octets: qgen/msg.fmt allowed nine instead of eight bytes for ISO and
-+ user specified, include/linux/atmsap.h:ATM_MAX_HLI was 7 instead of 8 (by
-+ Damian Gilmurray and Paisit Thamsakorn)
-+ - MPOA: bug fixes and other changes, see atm/mpoa/CHANGELOG (by Heikki
-+ Vatiainen)
-+
-+New features
-+------------
-+
-+ - ilmid: new option -i to set local IP address (suggested by Andrew May)
-+ - ilmid now also supports the MIB variables atmfAtmLayerMaxVpiBits and
-+ atmfAtmLayerMaxVciBits (based on a patch by Uwe Dannowski)
-+
-+Other changes
-+-------------
-+
-+ - ilmid: search for local IP address didn't consider LANE interfaces (lec*)
-+ - consolidated most of the various calls to gethostbyname and friends into
-+ text2ip (libatmd)
-+ - corrected some glitches in net/sched/sch_atm.c (untested)
-+ - removed debug/encopy, debug/endump, and debug/zndump from the distribution.
-+ They were almost useless and caused problems with make depend
-+ - SYMFILES in qgen/Makefile now determines location of atmsap.h at run time to
-+ avoid problems when kernel headers are not in /usr/include/linux (reported
-+ by Uwe Dannowski)
-+
-+
-+Version 0.46 to 0.47 (6-OCT-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - qgen didn't build for all UNI versions (fixed by Richard Gooch)
-+
-+New features
-+------------
-+
-+ - ilmid: new option -u to set UNI version (3.0, 3.1, or 4.0). Only available
-+ if compiled with -DDYNAMIC_UNI.
-+
-+Other changes
-+-------------
-+
-+ - ilmid: getIpAddr: improved robustness and added debugging output
-+
-+
-+Version 0.45 to 0.46 (5-OCT-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ENI and ZATM driver used to read IRQ directly from PCI configuration,
-+ bypassing any fixups (reported by Richard Gooch)
-+ - atmsigd.new: removed "Known bug" memory leak (when tracing)
-+ - led/lec_ctrl.c: signalling bug fixed, max_sdu now has correct value instead
-+ of 1 (by Heikki Vatiainen, reported by Josh Baratz <jbaratz@lucentctc.com>
-+ and Wolfgang Platzer <wplatzer@iaik.tu-graz.ac.at>)
-+ - lots of MPOA bug fixes and other changes, see atm/mpoa/CHANGELOG (by Heikki
-+ Vatiainen)
-+ - atmsigd reported "Q.2931.1" when configured to support Q.2963.1
-+
-+New features
-+------------
-+
-+ - atmsigd.new now supports run-time configuration of the signaling protocol
-+ version (via atmsigd.conf)
-+
-+Other changes
-+-------------
-+
-+ - added 16W bursts to ENI burst size configuration (NB: 16W may actually be
-+ *slower* than 8W)
-+ - lec_ctrl.c: zeppelin now uses LE_REGISTER protocol when TLVs are associated
-+ with client's MAC address (by Heikki Vatiainen)
-+
-+
-+Version 0.44 to 0.45 (1-OCT-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ENI driver didn't do four-word bursts on RX for sizes < 8 words
-+ - arequipad, atmarpd, bus, lecs, les, mpcd, sw_*, and zeppelin silently
-+ ignored extra command-line arguments instead of complaining
-+
-+New features
-+------------
-+
-+ - ENI: added configuration options to fine-tune burst sizes (in reponse to
-+ incompatibility found by Dave Airlie)
-+
-+Other changes
-+-------------
-+
-+ - changed the way how ATM-specific data is stored in skbs. Tentatively updated
-+ the the stack, including drivers. Use CONFIG_ATM_SKB to enable the new-style
-+ skbs.
-+ - Rules.make no longer discards the previous value of LDLIBS
-+ - sw_tcp now only establishes bi-directional VCs if both directions are really
-+ requested in the QoS structure
-+ - moved manual switch control from sw_tcp to the generic switch code; "tcpswc"
-+ is now called "swc", the corresponding switch.conf clause is now
-+ 'control <path>' instead of 'option control "<path>"'
-+
-+
-+Version 0.43 to 0.44 (24-SEP-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - CONNECT messages no longer contain the AAL type IE if EP ref is present and
-+ non-zero (reported by Heikki Vatiainen)
-+ - SSCOP: added mode for partial compatibility with Q.SAAL1 (to get rid of
-+ warnings reported by Heikki Vatiainen and of interoperability problems with
-+ Virata switches reported by Damian Gilmurray)
-+ - ilmid now returns a valid response for atmfMyIpNmAddress (by Uwe Dannowski)
-+ - configuration on-line help for CLIP didn't work because tag was different
-+ from configuration variable
-+ - atmsigd crashed when adding multiple local addresses on an interface
-+ (reported by Heiko Krupp)
-+ - atmaddr.8 said "ATMARP" in the header (reported by Hans Einsiedler)
-+ - net/atm/misc.c didn't include linux/config.h and linux/module.h, causing
-+ symbols to be missing when rebuilding the kernel after enabling modules
-+ (reported by Thomas Parvais)
-+
-+New features
-+------------
-+
-+ - new maintenance utility tcpswc to control sw_tcp "switches" (description at
-+ the end of switch/tcp/README)
-+ - added support for setting the CLP bit (untested; see doc/README.CLP)
-+ - added support for policing to the ATM qdisc (untested; see extra/tc/README)
-+ - ilmid: added support for atmfAtmLayerUniVersion (by Uwe Dannowski)
-+
-+Other changes
-+-------------
-+
-+ - updated the NICStAR driver to version 008b (by Rui Prior)
-+ - new switch fabric function fab_option to pass configuration options
-+ - atm2text now also supports unspecified and wildcard components in PVC
-+ addresses
-+ - added configuration option CONFIG_ATM_CLIP_NO_ICMP to discard packets for
-+ which no ATMARP entry exists silently instead of sending an ICMP (this is an
-+ ugly hack-around for the revalidation problem reported by Gerald Hanusch)
-+ - various minor documentation updates
-+ - atmarpd now sends InARP requests when active VC setup completes in order to
-+ tell the peer our IP address(es)
-+
-+
-+Version 0.42 to 0.43 (21-AUG-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - trying to use atmtcp when compiled as a module with the module not loaded
-+ crashed the kernel
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.1.117 kernel
-+ - included NICStAR driver by Rui Prior at INESC (this driver also includes
-+ parts of an earlier driver written by Matt Welsh, then enhanced by R. D.
-+ Rechenmacher and Jawaid Bazyar)
-+ - new atmsigd with support for multiple signaling entities (experimental)
-+
-+Other changes
-+-------------
-+
-+ - removed register dumping code from suni.c (leaked out into the distribution)
-+
-+
-+Version 0.41 to 0.42 (19-AUG-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atm.patch was out of sync again :-(
-+
-+
-+Version 0.40 to 0.41 (19-AUG-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - 0.40 contained an older atm.patch than the one that was supposed to go with
-+ it (some changes to sch_atm and MPOA were missing)
-+ - kernel didn't build with LANE enabled and MPOA disabled (fix by Mitchell
-+ Blank Jr)
-+
-+New features
-+------------
-+
-+ - MPOA now also supports CBR SVCs (by Heikki Vatiainen and Sampo Saaristo)
-+
-+Other changes
-+-------------
-+
-+ - atmtcp may work as a module (untested)
-+ - kernel code now uses capabilities instead of suser()
-+ - removed obsolete recycle_buffer code
-+ - distribution now also includes mkpatch, the script that's used to create
-+ atm.patch
-+
-+
-+Version 0.39 to 0.40 (13-AUG-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ilmid defined the value of "invalid" as 0 instead of 2 (fix by Timo
-+ Parnanen)
-+ - bash-2 doesn't like for n in $(SUBDIR); ... if SUBDIR is undefined (fix
-+ by Heikki Vatiainen)
-+ - LANE still cleared ATM_VF_RELEASED instead of calling atm_async_release_vcc,
-+ which apparently led to stray kernel crashes in signaling (found with a lot
-+ of help from John McPherson)
-+ - ATM qdisc now properly re-allocates skb memory to grow headers, if necessary
-+ - atm/switch/Makefile didn't build SUBDIRS
-+ - atmarpd sent garbage ATM addresses in InARP responses over PVCs (reported by
-+ Stefan Keller-Tuberg)
-+
-+New features
-+------------
-+
-+ - MPOA (Multi-Protocol Over ATM) client support written by Heikki Vatiainen
-+ and Sampo Saaristo
-+ - LANE client (zeppelin) now also supports LANE2 (by Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - accept() now also returns on ATM_VF_CLOSE
-+ - ATM qdisc now uses the same data format on rtnetlink as other qdiscs; new
-+ option for user-provided headers
-+ - atm/switch can now use "external" routing (e.g. provided by the fab control)
-+
-+
-+Version 0.38 to 0.39 (4-AUG-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - added missing #include <atm.h> in tcpsw.c (fixed by Heikki Vatiainen)
-+ - atmsigd allowed both sides to initiate PCR modification; Q.2963.1 only
-+ allows the connection owner (i.e. the caller) to do this
-+ - atmarpd no longer tries to use incoming SVCs with zero backward bandwidth
-+ for ATMARP
-+ - ENI and ZATM drivers didn't invoke vcc->pop on dev->ops->send failure
-+ - make install didn't probe correctly for presence of /usr/include/stdint.h
-+ (needed on GLIBC 1 systems)
-+ - net/atm/resources.c didn't export bind_vcc to modules (fix by Oliver
-+ Frommel)
-+ - net/arpd/atmarp didn't build without make depend (reported by Stefano
-+ Giacometti)
-+ - clip_mkip zeroed vcc->rx_inuse and didn't take into account that clip_push
-+ calls atm_return, which subtracts from vcc->rx_inuse too
-+ - fixed typos in qgen/uni.h (and msg.fmt) for causes 38, 41, and 43
-+ - atmsigd wrote exit trace to stderr when it had a dump directory and vice
-+ versa
-+ - documentation still claimed that atmtcp yields messages at boot time
-+
-+New features
-+------------
-+
-+ - added flow to ATM VCC mapping queuing discipline (experimental)
-+ - module for setting up ATM PVC/SVC mappings with "tc" in extra/tc (see
-+ extra/tc/README)
-+ - atmarpd: new request type art_query to request resolution without VC setup
-+ - atmarp: new undocumented option -Q to test art_query
-+ - added ATMTCP interfaces that survive disconnects (persistent; new atmtcp(8)
-+ options -p and -r; new ioctls ATMTCP_CREATE and ATMTCP_REMOVE)
-+
-+Other changes
-+-------------
-+
-+ - zeppelin didn't explicitly set the AAL type for outbound connections (by
-+ Heikki Vatiainen)
-+ - CLIP also allows SVCs to have no idle timeout at all (timeout = 0)
-+ - moved SUNI private ioctls (SUNI_GETLOOP and SUNI_SETLOOP) from
-+ drivers/atm/suni.h to include/linux/atm_suni.h
-+ - atmarpd now shows QoS information for VCs where it differs from the default
-+ or where no default is applicable
-+ - removed the file atm/WARNING, which gave an overly pessimistic perspective
-+ of the state of things
-+ - switch: fab_op now returns the cause value plus (optionally) a pointer to
-+ diagnostics in the callback instead of a simple okay/not okay indication
-+ - updated and corrected the atmtcp man page
-+ - further cleanup of the build procedure
-+ - README now mainly refers to http://lrcwww.epfl.ch/linux-atm/info.html
-+ - updated and trimmed BUGS
-+ - added a note to CREDITS indicating its obsolescence
-+
-+
-+Version 0.37 to 0.38 (25-JUN-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - fixed the remaining few #include <linux/atm.h>
-+ - invoking fcntl() or socketpair() on an ATM socket caused an "Oops" (reported
-+ by Jonathan Chan)
-+ - CLIP PVCs caused an "Oops" when cat'ing /proc/atm/pvc (reported by Marko
-+ Kiiskila and Robert Olsson)
-+ - atm/qgen/default.nl wasn't removed after build failure
-+ - debugging switch (sw_debug) did not stop operations after the first error
-+ - svc_accept returned apparent success instead of -EAGAIN, usually leading to
-+ a later -ENOTCONN
-+ - ttcp.c didn't initialize port_name, leading to erratic behaviour when making
-+ slight changes to the build process
-+ - atm_pdu2truesize diverged from alloc_skb, leading to sudden failure of VCs
-+ or of ATMARP (reported by Robert Olsson)
-+ - corrected use of '~' when applied to unsigned longs representing memory
-+ addresses in aread, ENI, and ZATM (reported by Wai-Sun Chia)
-+ - atmtcp and LANE didn't use bind_vcc when setting up control VCs
-+ - atmtcp got ENOMEM/EBUSY wrong when failing to create an interface
-+ - sig level <level> in atmsigd.conf didn't affect UNI diagnostics
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.1.105 kernel
-+ - added ATMTCP "switch" in atm/switch/tcp
-+ - atmtcp: new mode -s to connect to an ATMTCP "switch"
-+ - atmtcp: new option -d for debugging output
-+ - added -b option (the usual "background") to switch/relay.c
-+
-+Other changes
-+-------------
-+
-+ - changed "PDU" to "SDU" in the atmtcp(8) man page
-+ - atmarpd now includes the interface netmask in ATMARP table dumps
-+ - added ATM devices also to the Alpha architecture, because at least ATMTCP
-+ works (by Wai-Sun Chia)
-+ - added the removal of -Wmissing-prototypes to the 0.37 changes
-+ - removed -Wcast-align from Rules.make because of a conflict with
-+ /usr/include/socketbits.h of glibc 2 on Alphas (reported by Wai-Sun Chia)
-+ - atmsigd.conf.4: documented that debug log stderr works too
-+ - sap_equal now also allows wildcard matches for BHLI (with SXE_COMPATIBLE)
-+ - atmsigd now uses -m <mode> instead of -N and -A
-+ - atmsigd.conf now uses sig mode <mode> instead of sig net
-+
-+
-+Version 0.36 to 0.37 (6-JUN-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - lib/atm.h defined AF_ATMPVC to 20, but the correct value is 8. Likewise,
-+ AF_ATMSVC should be 20, not 21. (Reported by Luke Diamand)
-+ - fixed bad ASN encoding in ilmid (by Vesa-Matti Puro)
-+ - make install and make instdirs didn't stop on error
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.1.104 kernel
-+ - included a script to demonstrate the debug switch (see switch/debug/README)
-+
-+Other changes
-+-------------
-+
-+ - moved definitions not used by the kernel from linux/atmarp.h to atmarp.h
-+ - removed linux/atm_stdint.h (linux/types.h has now caught up)
-+ - changed ENI and ZATM driver to use new PCI interface
-+ - net/atm/clip.c no longer uses ether_setup (suggested by Alexey Kuznetsov)
-+ - more header file cleanup (main change: applications should now
-+ #include <atm.h> instead of #include <linux/atm.h>)
-+ - removed -Wmissing-prototypes from Rules.make because of a conflict with
-+ include/linux/byteorder/swab.h
-+
-+
-+Version 0.35 to 0.36 (23-APR-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - changed the numeric values of PF/AF_ATMPVC/SVC and SOL_ATM/AAL to avoid
-+ conflicts with other allocations. This breaks binary compatibility with
-+ ATM programs compiled under older kernels
-+ - RESTART ACK was sent with the wrong class when acknowledging the restart of
-+ the indicated virtual channel (fix by Mohsen Souissi)
-+ - RELEASE was retransmitted forever (to avoid having to perform a RESTART),
-+ although it's sufficient to retransmit once and then drop the connection
-+ - esi.c checked the kernel version code without including linux/version.h
-+ - CLIP changes magically fixed hangs on SICGIFCONF (reported by Wayne Salamon)
-+ - atmsigd usually didn't set pvc.sap_family in ISP messages
-+
-+New features
-+------------
-+
-+ - added build-time option -DTHOMFLEX to send RESTART when SAAL comes up, which
-+ works around a bug in some Thomson Thomflex 5000 switches (by Mohsen
-+ Souissi)
-+ - atmtcp: new option "-i itf" to request a specific interface number
-+ - the "debug switch" (switch/debug/sw_debug) is now capable of successfully
-+ signaling a UNI 3.x call (see switch/debug/README for details)
-+
-+Other changes
-+-------------
-+
-+ - atm_equal can now also compare PVC addresses. The argument type has
-+ therefore been changed from struct sockaddr_atmsvc * to struct sockaddr *
-+ - moved driver-private data from skb->atm.* into skb->cb
-+ - complete redesign of communication between atmarp(8) and atmarpd(8) (now
-+ uses a UNIX domain socket; suggested by Alexey Kuznetsov)
-+ - atmarp -a now also produces correct output if atmarpd is running with -d
-+ - removed clip(8)
-+ - moved atmarp(8) from atm/ip into atm/arpd, removed atm/ip
-+ - /proc/atm/svc shows listening sockets again
-+ - cleaned up a few cases where diag(...,DIAG_FATAL,...) was followed by an
-+ "else" or a "return".
-+ - atmsigd now uses Unix domain sockets (instead of named pipes) to communicate
-+ with non-kernel ISP users (updated test/isp too)
-+ - net/atm/resources.c:atm_dev_register can now be asked to assign a specific
-+ interface number (-1 yields the old behaviour)
-+
-+
-+Version 0.34 to 0.35 (27-MAR-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ilmid compared memcmp results with -1,1, which fails under optimization
-+ (fixed by Damian Gilmurray)
-+ - various fixes and cleanup in how CLIP interacts with the neighbour cache
-+ (spotted by Alexey Kuznetsov)
-+ - Rules.make complained about missing "optprocess" command on some occasions
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.1.90 kernel
-+ - added some components for ATM switch control (not properly integrated yet,
-+ so they don't do anything useful at the moment; written by Roman Pletka)
-+
-+Other changes
-+-------------
-+
-+ - eliminated various compiler warnings when compiling with glibc2
-+ - removed clip_hard_header (suggested by Alexey Kuznetsov)
-+
-+
-+Version 0.33 to 0.34 (13-MAR-1998)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - eni.c didn't include config.h (fix by Pete Wyckoff)
-+ - (yet another) VCC list handling bug (fixed by Heikki Vatiainen)
-+ - kernel also applied idle timeout to CLIP PVCs
-+ - make clean didn't remove test/errnos.inc
-+ - atmsigd errored as_connect and as_accept with as_close instead of as_error
-+ - eni: bandwidth was sometimes reserved for UBR VCs
-+ - eni: checking of bandwidth changes was broken
-+ - eni: error handling after failed bw change checks destroyed the free list
-+ - test/errnos.inc sometimes wasn't generated because of mtime granularity (fix
-+ by Brian Armstrong and Corinne Rosier)
-+ - fixed use of return code of get/put_user and copy_from/to_user
-+ - kernel: fixed a few minor race conditions
-+ - ATM_GETADDR left address list locked on fault
-+ - maximum length of high layer information was 7 bytes instead of 8 for ISO
-+ and User Specific high layer information (reported by Damian Gilmurray)
-+ - some tools didn't include errno.h although they use errno or Exxx
-+ - atmsigd usually accessed deallocated memory when writing traces, which
-+ sometimes led to crashes (reported by Heikki Vatiainen)
-+ - indentation of the first two lines of UNI signaling messages in traces was
-+ missing
-+ - LANE: duplicate data direct connections to entities where we already
-+ have a connection are now forbidden. LES and BUS can now co-reside.
-+ (Reported by Jean-Francois Moine, fixed by Heikki Vatiainen)
-+ - LANE: plugged a file descriptor leak (by Heikki Vatiainen)
-+ - atmsigd.conf.4 incorrectly stated that diagnostics must have a higher
-+ priority than the specified level to get printed (they're also printed if
-+ their priority is equal to that level)
-+ - zatm driver didn't virt_to_bus the back pointer of TX rings, leading to
-+ crash after sending the 32nd PDU of a VCC (reported by Ajay Bakre)
-+ - zatm_feedback sometimes returned with interrupts disabled
-+ - ENI driver didn't treat requests for UBR at link speed as "unlimited" and
-+ allocated one shaper for each such VCC
-+ - atm_async_release_vcc now has its own flag ATM_VF_CLOSE. Overloading
-+ ATM_VF_RELEASED caused hung SVCs under some conditions.
-+ - atmsigd sometimes released listening sockets before kernel completed its
-+ cleanup, yielding warnings and zombies
-+ - atmsigd accessed already deallocated data structures when handling
-+ unparseable signaling messages
-+
-+
-+New features
-+------------
-+
-+ - upgraded to the 2.1.79 kernel
-+ - CLIP now handles NETDEV_CHANGE (proposed by Pete Wyckoff; untested)
-+ - various minor signaling changes for operation as switch control
-+ - new device operation proc_read: device drivers can now register in /proc
-+ (e.g. /proc/atm/eni:0)
-+ - added some more BHLI definitions to include/atmsap.h, including draft
-+ mapping of well-known TCP/UDP port numbers
-+ - added support for TIOCOUTQ/TIOCINQ on native ATM
-+ - new library function sap_equal
-+ - added convenience function atmpvc_addr_in_use to linux/atm.h
-+ - major overhaul of "isp", which is now a good tool for signaling regression
-+ tests. See atm/test/README.isp
-+ - LANE can now be compiled as a kernel module (by Heikki Vatiainen)
-+ - new tool debug/svctor.c to torture signaling by setting up and releasing
-+ lots of SVCs (see the source for details)
-+
-+Other changes
-+-------------
-+
-+ - cleaned up the copying terms: libraries are now covered by LGPL instead of
-+ GPL and qgen doesn't "taint" the code it generates
-+ - atmarpd: IP addresses are now __u32 instead of unsigned long
-+ - atmarpd: changed printf("... %08x ...",(unsigned long) ptr) to %p ...",ptr
-+ - /proc support now allocates inode numbers dynamically
-+ - added comment to clarify motivation for useless buffer alignment in aread.c
-+ (reported by Jeon Jong Hwan)
-+ - suni.c and uPD98402.c: SONET_GETSTATZ no longer clears the statistics if the
-+ copy faults
-+ - ilmid should now work on any interface (patch by Heikki Vatiainen)
-+ - changed all __uNN of tools to uintNN_t for glibc2-compatibility
-+ - added stdint.h to lib for compatibility with future versions of glibc2
-+ - various other evil hacks in tools to make things compile with glibc2
-+ - the NIC debugging programs ed, encopy, endump, zndump, and znth are no
-+ longer built and installed by default
-+ - for compatibility with POSIX 1003.1g, accept now returns ECONNABORTED
-+ instead of ECONNREFUSED if connection is already gone (proposed by Heikki
-+ Vatiainen)
-+ - listening sockets now return instantly if the signaling demon dies
-+ - various minor LANE updates to track API changes (by Heikki Vatiainen)
-+ - SUNI now also warns if signal is missing at initialization time
-+ - zatm: added work-around for unfair buffer space accounting
-+ - clarified some of atmarpd's diagnostics
-+ - documentation updates
-+
-+
-+Version 0.32 to 0.33 (19-NOV-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - SSCOP did poll sequence number comparisons in the (data) sequence number
-+ space, typically leading to periodic SSCOP restarts (reported by Heikki
-+ Vatiainen)
-+ - atmsigd now releases calls on receipt of STATUS with call state 0 (reported
-+ by Heikki Vatiainen)
-+ - qgen tried to print the names of unnamed groups (fix by Simon Leinen)
-+ - make clean in qgen left all the .c and .h files produced by qgen
-+ - minor fixes to signaling message format description (qgen/msg.fmt,
-+ previously qgen/uni*)
-+ - /usr/include/atm.h was calling itself "atmlib" (found by Leena Chandran)
-+ - atmsigd: the address format of the calling party number was used to
-+ determine the format of the called party number in a SETUP message
-+ - added some semicolons to Rules.make for bash 2.0 compatibility (by Tan Chang
-+ Hu and Rolf Kunisch)
-+ - select/poll indicated an exception when a non-blocking connect terminated.
-+ Now it indicates writability, and an error only if the connect failed.
-+ - LES/BUS can now co-exist at the same address (by Heikki Vatiainen)
-+ - fixed race condition between asynchronous release (e.g. on ATMARP idle timer
-+ expiration) and signaling demon response
-+ - fixed a typo "[itf]." instead of "[itf.]" in atmsigd.conf.8
-+ - "ATM drivers" kernel configuration section is no longer a top-level menu
-+ item but it's now under "Network devices"
-+ - sigd_close forgot to purge VCs not connected to devices (e.g. closing ones),
-+ so they hung
-+ - the list of unconnected VCs was sometimes garbled
-+ - atmsigd printed null string for as_itf_notify message name when debugging
-+ - Arequipa: check_aq_vcc also accepted VCs that were already released by
-+ signaling
-+ - ATM_VF_PARTIAL and ATM_VF_BOUND had the same value
-+ - atmaddr still used old calling convention of ATM_GETNAMES
-+ - the atmarpd man page referred to atmarpd as "atmsigd"
-+ - various atmtcp bug fixes
-+ - atm_recvmsg sometimes returned with interrupts disabled (reported by Pete
-+ Wyckoff)
-+ - fixed ttcp_atm dependencies (.depend contains dependencies for "ttcp.o")
-+ - UNI message format: "more" was missing for def_pck_size
-+ - eni/suni didn't compile as modules (fixed by Pete Wyckoff and Ladislav
-+ Lhotka)
-+ - further net/atm/Makefile cleanup
-+ - arequipa_close always left the socket with arequipa_expect enabled. Now it
-+ returns it to the previous state.
-+ - ENI driver was leaking buffer memory on failure of set_tx
-+ - atmarpd didn't print symbolic names of "new" flags (ATF_ARPSRV, etc.)
-+ - ATM ARP server didn't make client entries public (reported by Tom Mahieu)
-+ - drivers/atm/Config.in had extra "endmenu" (fixed by Ladislav Lhotka)
-+ - atmarpd got confused when receiving InARP reply without source ATM address
-+ - atmsigd sometimes didn't stop timers if Q.2963.1 wasn't enabled
-+ - when rejecting a call, the kernel freed the VCC twice
-+
-+New features
-+------------
-+
-+ - merged source tree (except Arequipa, single-copy, and various NIC drivers)
-+ with 2.1.65-Linus tree
-+ - qgen can now handle repeated information elements
-+ - added ATM_SETESI[F] ioctl and esi utility (boards without a real ESI in ROM
-+ should now set the default ESI to 0x000000000000)
-+ - new socket option SO_ATMSAP along with struct atm_sap (using a fixed-size
-+ BLLI array instead of the linked list in struct sockaddr_atmsvc)
-+ - added Q.2963.1 PCR modification in signaling and the ENI driver
-+ - aread: new option -c to print received data as characters (similar to od -c)
-+ - new tool test/align to test handling of mis-alignment in NIC drivers
-+ - atmsigd now supports policy restrictions for incoming/outgoing calls (see
-+ atmsigd.conf.4, "policy")
-+ - atmsigd can now also use a pair of named pipes (or, actually, any named
-+ object in the file system) for communicating with the user of signaling
-+ (normally the kernel)
-+ - new tool called "isp" (for "Internal Signaling Protocol") to talk ISP with
-+ atmsigd over named pipes
-+ - new functions sap2text and text2sap to converts SAPs to/from textual
-+ representation, and a sap(7) man page
-+ - new traffic parameter field "pcr" to indicate the desired PCR. min_pcr and
-+ max_pcr can the be used to indicate the acceptable range.
-+ - new function atm_pcr_goal to help drivers to interpret traffic parameters
-+
-+Other changes
-+-------------
-+
-+ - removed some more obsolete CLIP-related ioctls
-+ - qgen: simplified generation of engines with a prefix other than "q" or "qd"
-+ - ENI and ZATM drivers now use shareable interrupts
-+ - cleaned up some 32bit-isms in ENI driver
-+ - cleaned up several 32bit-isms in SSCOP (reported by Tan Chang Hu)
-+ - SSCOP: work-arounds for buggy ntohl prototype in some early versions of
-+ glibc (reported by Tan Chang Hu, further explored by David S. Miller and
-+ Richard Henderson)
-+ - started updating the ZATM driver for 2.1 (still crashes under load)
-+ - added missing 2.1 pieces in ENI's SUNI driver
-+ - added __initfunc and __initdata where appropriate
-+ - tools tree now compiles under 0.31 (2.0.25 kernel) and 0.33 (2.1.55 kernel)
-+ - gratuitous improvement of identifier tree allocation in qgen
-+ - the interface number is now optional for sonetdiag (like for atmdiag)
-+ - started implementing the kernel side of point-to-multipoint signaling
-+ support
-+ - /proc/atm/arp now displays "resolving" or "expired" (with the number of
-+ times the entry is referenced) instead of "incomplete".
-+ - moved ATM_MAX_BLLI from linux/atm.h to linux/atmsap.h
-+ - changed ttcp_atm to use SO_ATMSAP (if available) to set BHLI
-+ Note: ttcp_atm previously didn't use a BHLI, so old and new versions of
-+ ttcp_atm don't interoperate.
-+ - updated all other programs using SAPs too, except for LANE
-+ - ENI: failure to allocate a traffic shaper now yields EBUSY instead of EAGAIN
-+ - instead of just complaining, the ENI driver now handles all kinds of
-+ mis-alignment in the TX path properly
-+ - re-implemented send and receive side of Arequipa
-+ - merged qgen/uni3x and qgen/uni40 into msg.fmt
-+ - added missing Q.2931/UNI 4.0 items to qgen/q2931.h and msg.fmt
-+ - also added BLLI L3 H.310 codepoint with related encodings
-+ - various file name and identifier changes to give a more appropriate name
-+ (e.g. "uni" or "call") to something that's never been Q.2931
-+ - added library dependencies
-+ - atmsigd produces more readable and usually more comprehensive debugging
-+ output
-+ - atmsigd.conf.4 now mentions that -d is the debugging output addict's choice
-+ - all programs accepting -l syslog now also accept -l stderr. (This is useful
-+ for atmsigd if atmsigd.conf sets logging to something else.)
-+ - atmsigd now issues ATM_GETADDR ioctls on the signaling socket, not on the
-+ kernel socket
-+ - WARNING: text2qos: "pcr" is no longer a synonym for "max_pcr" !
-+ - text2qos now refuses min_pcr=max
-+ - device driver interface: removed vcc->peek; device drivers now choose their
-+ own allocation strategy (change motivated by bug report from Furquan Ansari)
-+ - drive driver interface: new helper functions atm_charge/atm_return to handle
-+ buffer space allocation
-+ - device driver interface: vcc->push no longer allocates buffer space. This is
-+ now done by the driver, via atm_charge
-+ - updated eni, zatm, and atmtcp to use the new mechanism
-+ - zero padding in eni driver failed due to mis-alignment on some systems
-+ (fixed by Pete Wyckoff)
-+ - various compiler warnings removed (by Pete Wyckoff)
-+ - removed support for pre-AREQUIPA_WORK mechanism
-+ - arequipa close mechanism cleanup
-+ - further cleaned up QOS parameter checking
-+ - new ISP message as_identify for parallel call processing (not supported yet)
-+ - zatm: renamed struct zatm_thist to struct zatm_t_hist after wondering
-+ myself what on earth "this t" could be ...
-+ - doc/Makefile now invokes dvips with -o
-+
-+
-+Version 0.31 to 0.32 (10-JUL-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - manipulation of local ATM addresses didn't check for permission
-+
-+New features
-+------------
-+
-+ - ilmid now supports the system group and a couple of ILMI MIB objects (by
-+ Scott Shumate)
-+ - device and VCC allocation is now dynamic
-+ - E.164 addressing support and corrections to address coding in uni3x/uni40
-+ (by S. A. Wright, T. C. Jepsen, and Z. Zhang)
-+ - support for device de-allocation via per-device operation dev_close
-+
-+Other changes
-+-------------
-+
-+ - upgrade to kernel version 2.1.37
-+ - ENI driver cleanup (uses readl/writel, skb_put, etc.)
-+ - socket option handling has changed: optval is now void * (to improve
-+ compile-time type checking) and optlen is int (not int *) in getsockopt
-+ - socket option "names" now encode the level and the size (based on an idea of
-+ Elwyn Davies)
-+ - cleaned up some of the #includes in net/atm/proc.c
-+ - total rewrite of ATMTCP (now the data forwarding is done in user space,
-+ which makes things slower but a lot more flexible)
-+ - separated PDU parsing and printing from SSCOP state machine
-+ - new per-device operation dev_close to shut down devices
-+ - changed a few DIAG_WARNs to DIAG_INFO in ilmid
-+
-+Removed features
-+----------------
-+
-+ - polled ATM devices are no longer supported
-+ - CLIP is gone (use ATMARP instead)
-+ - Arequipa and LANE don't work yet (will come back later)
-+
-+
-+Version 0.30 to 0.31 (22-APR-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmarpd even refused IP address changes by the ATMARP server, which
-+ typically led to the creation of one extra SVC
-+ - ATMARP timeouts were computed at the wrong place (found by Gerald Hanusch)
-+ - aqtest's usage didn't mention the -v option
-+ - some tools used 0x%p instead of %p (which is fine in the kernel, by the way)
-+ - skb_migrate didn't update skb->list
-+ - zeppelin: incurred spurious core dumps on unsuccessful attempts to connect
-+ to LANE servers, ESI parsing from command line seg faulted, obtaining ESI
-+ from NIC left an ATM socket hanging, man page didn't describe all options
-+ (by Marko Kiiskila and Heikki Vatiainen)
-+
-+Other changes
-+-------------
-+
-+ - arequipa_close now only returns after the Arequipa connection has been
-+ successfully closed. This allows applications to reliably close and
-+ re-create Arequipa SVCs, e.g. to change the traffic parameters.
-+ - the arequipad operations 3rd party close and synchronization are now handled
-+ inside the kernel and survive arequipad restarts
-+
-+
-+Version 0.29 to 0.30 (10-APR-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmtcp didn't use vcc->push and therefore got the buffer usage accounting
-+ wrong (fix by Gerald Hanusch)
-+ - when closing a VC, the ENI driver didn't wait until all TX data has really
-+ left the board, which created a close/open race (found by Richard Jones)
-+ - SSCOP sometimes omitted the last element in a STAT PDU (fix - even with
-+ optimization vs. Q.2110 - by Ngo Bach Long)
-+ - atmarpd allowed ARP information to change permanent entries (found by Gerald
-+ Hanusch)
-+ - atmsigd's get_pvc used the maximum SDU size, thereby wasting buffer space
-+ very quickly, which led to signaling problems (reported by Richard Jones and
-+ Rik Wade)
-+ - oops, the BUGS file was always one version number ahead
-+ - ATMARP had a race between packets sent by the remote station and the
-+ ATMARP_MKIP ioctl. This caused the dreaded "unknown hw protocol 0xaaaa"
-+ error. (Finally fixed thanks to a dump provided by Patrick Flynn)
-+ - Arequipa had the same race for AREQUIPA_INCOMING. This probably caused the
-+ occasional "loss" (they were actually kept in vcc->recvq until the
-+ connection was closed) of the first packet(s).
-+
-+
-+Version 0.28 to 0.29 (4-APR-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - saal/sscop.c: NORMALIZE macro was weird and broken (fix by Ngo Bach Long)
-+ - InARP queries didn't contain the target ATM address, even if it is known,
-+ which stretches the allowances RFC1577 makes for violating RFC1293 (found
-+ by Juha Heinanen)
-+ - tcp_conn_request: Arequipa modification to MTU size calculation used wrong
-+ socket (fix by Gerald Hanusch)
-+ - kernel ATMARP table handling had some obscure races
-+ - temporary work-around: added A2T_LOCAL when using A2T_NAME in atmsigd and
-+ atmarpd. Before, systems using ANS where the name server is reached via (IP
-+ over) ATM exhibited truly bizarre failure patterns when refreshing ATMARP
-+ entries. (With a lot of help from Juha Heinanen)
-+ - ditto for arequipad, although the effects were less dramatic
-+ - atmarpd: if not using -m, incoming connections for which a valid entry
-+ already existed (e.g. due to manual configuration) were not entered in the
-+ kernel ATMARP table until after the entry timed out for the first time (by
-+ Gerald Hanusch)
-+ - skb data areas are now aligned using skb_reserve instead of directly
-+ tampering with skb->data (and forgetting skb->tail in the process ...)
-+ (found by Uwe Dannowski)
-+
-+New features
-+------------
-+
-+ - atmarpd is now automatically notified of IP over ATM interfaces already
-+ existing at startup. This greatly simplifies the atmarpd restart ritual.
-+ (All ATMARP table entries and the default QoS are still lost, though.)
-+
-+Other changes
-+-------------
-+
-+ - cleaned up some weird and partially dead code in arpd/arp.c (found by
-+ Gerald Hanusch)
-+ - removed superfluous continue in arp.c:atmarp_setentry
-+ - device-driver specific declarations now reside in
-+ /usr/include/linux/atm_<drv_name>.h, so that disgusting hacks like
-+ #include "/usr/src/linux/..." can be avoided (based on proposal by Uwe
-+ Dannowski)
-+ - updated the list of supported NICs in README and the on-line help
-+ - arpd/atmarpd.8: documented that atmarpd -m may violate RFC1577 in subtle
-+ ways (pointed out by Gerald Hanusch)
-+ - updated MPR usage description to version 1.5 and removed mpr.patch
-+ - removed MEM_DEBUG from the build process (MPR 1.5 initializes itself
-+ automatically)
-+
-+
-+Version 0.27 to 0.28 (27-MAR-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmarpd restarted timers on as_valid -> as_valid transitions, illegally
-+ delayed necessary refreshes (reported by Juha Heinanen)
-+ - SSCOP cleared POLL timer on IDLE timer expiry (fix by Ngo Bach Long)
-+ - atmsigd didn't initialize "now" soon enough, causing an unnecessary
-+ retransmission of the first BGN PDU (by Ngo Bach Long)
-+ - atmsigd responded to RELEASE COMPLETE in ss_rel_ind with a STATUS instead of
-+ entering ss_wait_close (by Steve Pope)
-+
-+New features
-+------------
-+
-+ - new tool aqpvc to declare incoming Arequipa traffic on a PVC to the system
-+ (caveat: removing such a PVC can turn out to be surprisingly difficult)
-+
-+Other changes
-+-------------
-+
-+ - removed some useless code in atmarpd's handling of VC disconnects
-+ - removed unused signaling state ss_hold (equivalent to ss_wait_rel)
-+
-+
-+Version 0.26 to 0.27 (11-MAR-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - oops, forgot to include atm/lib/rtf2e164_cc.pl in the distribution
-+ - atmsigd's VCI allocation in -N mode was too simplistic and failed after some
-+ signaling activity (reported by Richard Jones)
-+ - atm_connect was rejecting ATM_{VPI,VCI}_ANY
-+ - aq_prev in the list of Arequipa connections wasn't set properly, leading to
-+ random crashes when using Arequipa (found and fixed by Richard Jones, after
-+ weeks of tearing his hair out)
-+ - arequipa_close didn't remove the Arequipa route, which kept the upper layer
-+ protocol connection alive for a rather long time (reported by Richard Jones)
-+
-+New features
-+------------
-+
-+ - ilmid enhancements: vastly improved retry mechanism, workaround for a bug in
-+ the ATML Virata switch, -v option for very detailed debug output (Scott
-+ Shumate)
-+ - atmsigd now also accepts the signaling VC as a command line argument
-+ - qos2text appended colon to traffic type even if nothing else followed
-+ - new program debug/aqtest to test Arequipa (based on work by Mehdi Tazi)
-+
-+Other changes
-+-------------
-+
-+ - added a few missing NULLs to struct atmdev_ops initialization in various
-+ drivers (this change does not alter any semantics)
-+ - changed printk ...%lx... (unsigned long) ptr to ...%p... ptr at many
-+ places
-+ - removed atm/lib/rtf2cc.pl and atm/lib/cc.inc (they were only used by an
-+ interim version of cc_len)
-+ - atmarp's usage no longer contains lines longer than 80 characters
-+ - added get_logfile() and get_verbosity() to libatm (for ilmid, by Scott
-+ Shumate)
-+ - select() consumed CPU time unnecessarily if testing for one direction while
-+ there's a lot of activity in the other direction (e.g. atmarpd wasted cycles
-+ in select() for each outbound packet while waiting for ARP messages)
-+ - the value of ATM_AAL0 has changed (from zero to 13), so all programs using
-+ AAL0 need to be recompiled
-+ - MAX_ATM_QOS_LEN has changed, so most programs using qos2text need to be
-+ recompiled
-+ - the AAL can now also be set along with the QoS parameters. This approach
-+ should be used instead of specifying it in the socket() call.
-+ - if no AAL is specified, the kernel now defaults to AAL5 (was AAL0)
-+ - updated most demons, tools, and library functions to set the AAL along with
-+ the QoS parameters
-+
-+
-+Version 0.25 to 0.26 (29-JAN-1997)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - ATMARP VCCs could stay around forever even after timing out, because the
-+ process was not woken up.
-+ - the ATMARP "fix" in 0.25 introduced an infinite loop. Fixed that one too.
-+ - bit 8 in octets 6 and 7 of BLLI ("ext") were set to 1 instead of 0 when
-+ using ATM_L2_USER/ATM_L3_USER (reported by ukl2@rz.uni-karlsruhe.de)
-+ - qlib added silly offset (which fortunately happened to be zero most of the
-+ time) to dumps of large fields (fixed by Jean-Francois Moine)
-+ - IP over ATM restricted MTU changes to valid Ethernet MTU sizes
-+ - LANE: fixed two bugs that crashed zeppelin when the connection to the
-+ servers failed (by Marko Kiiskila)
-+
-+New features
-+------------
-+
-+ - lib/ans.c now properly computes the length of the country prefix of E.164
-+ addresses for reverse lookups (needs file /etc/e164_cc, see USAGE)
-+ - if the new -m option is set, atmarpd now merges incoming calls into the
-+ ATMARP table if the ATM address is known (see atmarpd.8 for details)
-+ - included an RPM spec file (this is still very experimental)
-+ - NICStAR driver now also works with IP over ATM (by Stuart Daniel)
-+ - usage.txt: added description of how to run ATM NICs back-to-back (by Richard
-+ Jones)
-+
-+Other changes
-+-------------
-+
-+ - signaling traces now also include SAAL up/down transitions
-+ - qgen no longer (unnecessarily) depends on libatm.a
-+ - started work on letting qgen handle items that appear at more than one
-+ place, e.g. repeated IEs (after an idea by Jean-Francois Moine)
-+ - did some cleanup and added comments to qlib.[ch]
-+ - added -m option to atmarp in config/redhat-4.0/atm.init
-+ - added new make target "filenames" to generate a list of all the files which
-+ are installed
-+ - config/redhat-4.0 now contains an example hosts.atm file and also a Makefile
-+ for more convenient installation
-+ - atmsigd now reads atmsigd.conf before parsing the command-line options,
-+ thereby allowing values set in the file to be superseeded
-+ - atmsigd now also logs the internal reference and the caller's address on
-+ calls establishment
-+ - ilmid: very dirty hack to give switches some time to process ILMI cold start
-+ (by Joseph Evans)
-+
-+
-+Version 0.24 to 0.25 (20-DEC-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - net/atm/atmarp.c:idle_timer_check only expired every other entry (reported
-+ by Marko Kiiskila)
-+
-+New features
-+------------
-+
-+ - LANE now also supports IPX (SNAP and 802.3; by Marko Kiiskila)
-+ - NICStAR driver now supports VPI != 0 and has configurable settings in
-+ nicstar.h (by Stuart Daniel)
-+
-+Other changes
-+-------------
-+
-+ - ENI: TX DMA scratch are is now stored per device. This should allow multiple
-+ NICs to coexist.
-+
-+
-+Version 0.23 to 0.24 (29-NOV-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atm/test/window.c was missing in 0.23
-+ - atm/debug/delay didn't build unless atm/lib headers were already installed
-+ in /usr/include
-+ - atm/debug/znth had undefined return value
-+ - SSCOP: fixed typo (that could probably kill the SSCOP connection in case of
-+ a retransmission); fix by Olivier Bonaventure
-+ - corrected unnecessarily large buffer allocation in zatm.c:pool_index (by
-+ Jonathan Larmour)
-+ - hosts2ans.pl generated reverse addresses for the domain "ATM.INT" instead of
-+ "ATMA.INT"
-+ - atmarpd "forgot" any pre-set QOS when receiving new ARP information for the
-+ respective entry (reported by Gerald Hanusch)
-+ - window scale didn't scale the window sent in the SYNACK packet (reported by
-+ Juan-Antonio Ibanez)
-+ - LANE: better connection failure handling in zeppelin (by Marko Kiiskila)
-+ - LEC kernel timer wasn't restarted when restarting zeppelin (found by Gerald
-+ Hanusch, fixed by Marko Kiiskila)
-+ - LANE: le_flush_request was sent too early when establishing connection (by
-+ Marko Kiiskila)
-+ - zeppelin stopped operation (unwantedly) in random cases when LANE servers
-+ were down (by Marko Kiiskila)
-+ - LANE: non-blocking connections, VCC and LE ARP timeouts, and TLV fields in
-+ LE_CONFIG_RESPONSE fixed (by Marko Kiiskila)
-+
-+New features
-+------------
-+
-+ - atm2text now also uses ANS
-+ - signaling traces now also contain error reports from qgen
-+ - added new build-time configuration option "CISCO" (in atm/Rules.make) to
-+ work around a bug in Cisco's point-to-multipoint signaling
-+ - included example configuration files for RedHat 4.0 (see
-+ atm/config/redhat-4.0/README)
-+
-+Other changes
-+-------------
-+
-+ - local variable "link" in atm/debug/delay.c:loop was shadowing "link" system
-+ call
-+ - cleaned up various Makefiles
-+ - qgen: bytes left in qet_space are now more meaningful
-+ - named (ANS) now also starts even if atmsigd is not running and retries to
-+ create the ATM socket in 15 minute intervals until is succeeds (by Marko
-+ Kiiskila)
-+ - LANE: (too) short le_flush_responses (Cisco 7010, sw ??.??) are now handled
-+ (by Marko Kiiskila)
-+
-+
-+Version 0.22 to 0.23 (16-NOV-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - fixed stupid typos in atm/lib/atmres.h and an unnecessary dependency on
-+ libresolv.a in atm/lib/Makefile (reported by Gerald Hanusch)
-+ - fixed warning about implicit declaration of function bigphysarea_init in
-+ init/main.c
-+ - I think I fixed the SSCOP VR(MR) problems that were first reported by
-+ Edouard Lamboray in '95, then by Heinz Schuerch, and that finally led to a
-+ total SSCOP breakdown (in 0.22) reported by Gerald Hanusch
-+
-+New features
-+------------
-+
-+ - integrated the IDT 77201 (NICStAR) driver by Matt Welsh and Stuart Daniel
-+ <stuartd@eecs.umich.edu>. Note that this driver currently only supports
-+ native ATM.
-+ - new throughput and latency benchmark test/window (by Matt Welsh)
-+
-+Other changes
-+-------------
-+
-+ - upgrade to kernel version 2.0.25
-+ - changed drivers/atm/eni.c:do_tx:dma to static in order to reduce kernel
-+ stack use (by 480 bytes). Note that this hack may crash systems with more
-+ than one ENI adapter.
-+ - qlib now also complains if changing a field without a fixed list of values
-+ - made a few changes to the native ATM data delivery path to handle some
-+ strangeness required by the IDT driver
-+
-+
-+Version 0.21 to 0.22 (13-NOV-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - (dummy) depend target was missing in atm/man (reported by Bernd Wolf)
-+ - net/atm/arequipa.c:make_aq_vcc didn't set ATM_VF_AQINUSE, thereby allowing
-+ race conditions to slip through
-+ - fixed a few potential race conditions when activating Arequipa
-+ - text2qos didn't complain if unit was omitted after multiplier, allowing
-+ misleading settings like pcr=50M (that's 19.2 Gbps)
-+ - SSCOP: took wrong branch if POLL_AFTER_RETRANSMISSION was enabled (fix by
-+ Jonathan Larmour)
-+ - SSCOP: rel_ind for ENDAK and BGREJ PDU in sscop_inconn was sent with "user"
-+ = 1 (must be 0 for "Source := SSCOP")
-+ - initialize_vr_mr now initializes vr_mr to a constant value (instead of
-+ garbage plus constant value)
-+ - atm_recvmsg now ignores msg->msg_name, as it should by POSIX 1003.1g (fix by
-+ Mike Wooten)
-+ - atm_sendmsg now fails with EISCONN instead of with EINVAL if msg->msg_name
-+ is set, as it should by POSIX 1003.1g (reported by Mike Wooten)
-+ - atm_recvmsg and atm_sendmsg now return ENOTCONN if not connected and
-+ EOPNOTSUP if flags are passed, as they should by POSIX 1003.1g
-+ - the QOS zeppelin uses for its connections can now be set with the option -q
-+ - atmarpd didn't include the QOS in PVC entries, so atmarp -a complained about
-+ them
-+
-+New features
-+------------
-+
-+ - kernel changes to support tcpdump with LANE (by Marko Kiiskila)
-+ - patch for tcpdump 3.0.4 (installed as tcpdump_atm) to support Classical IP
-+ and LANE (by Marko Kiiskila)
-+ - patch for BIND 4.9.5 to support ANS (ATM Name Service) functionality (by
-+ Marko Kiiskila)
-+ - added hierarchy extra/ for packages for which only patches are contained in
-+ the ATM on Linux distribution
-+ - enhanced text2atm to use ANS if local lookups fail (atm2text will be updated
-+ later)
-+ - wrote script extra/hosts2ans.pl to convert hosts.atm file to ANS zone files
-+
-+Other changes
-+-------------
-+
-+ - changed ATM_VF_AQINUSE to ATM_VF_AQDANG and changed aq_list membership to
-+ be for dangling VCs only
-+ - added the new command-line options to ttcp_atm's online help (finally !)
-+ - atm_sendmsg now returns error codes from the driver's send function
-+ (suggested by Jonathan Larmour)
-+ - text2qos now performs a syntax check if NULL is passed in the qos argument
-+ - various minor LANE cleanup (Marko Kiiskila)
-+ - upgraded to the latest version of t2a.pl
-+ - {A2T,T2A}_REMOTE is obsolete; instead, {A2T,T2A}_LOCAL should be used if
-+ ANS lookups are _not_ desired
-+
-+
-+Version 0.20 to 0.21 (18-OCT-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - net/atm/common.c:atm_connect didn't refuse traffic_class == ATM_NONE in both
-+ directions
-+ - include/linux/atmsvc.h:SELECT_TOP_PCR didn't default to ATM_MAX_PCR if
-+ min_pcr == 0 && max_pcr == 0
-+ - debug/delay swallowed one-byte packets
-+ - oops, forgot man/Makefile, so qos.7 wasn't installed
-+ - atmarpd left max_sdu at zero for automatically generated entries
-+ - atmarpd now only uses the default QOS if the traffic type is set in neither
-+ direction
-+ - signaling: if the listen queue was full, new connections were rejected with
-+ as_close instead of as_reject, thereby upsetting atmsigd
-+ - svc_accept didn't adjust the listen queue quota when rejecting incoming
-+ connection requests
-+ - fixed a few bad font selections in atmsigd(8)
-+
-+New features
-+------------
-+
-+ - included the window scale patch by Randy Scott <scottr@belle.bork.com> and
-+ Robert Hill <rhill@tisl.ukans.edu>
-+ - -q option for ilmid to set the QOS (like in atmsigd)
-+ - new script mkbindist to install the utilities into a tar.gz file
-+
-+Other changes
-+-------------
-+
-+ - debug/delay now prints the usage if invoked without arguments
-+ - removed the pretentious usec resolution for delays in debug/delay
-+ - removed the UBR semantics change warning
-+ - qos.7: clarified that bps are the user data rate
-+ - arequipa_attach_unchecked now also adjusts the upper layer MTU (which can
-+ violate RFC1122, but I'll tackle that later)
-+ - text2qos now also accepts fractional values, e.g. 9.6kbps
-+
-+
-+Version 0.19 to 0.20 (14-OCT-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - fixed a few typos and errors in the 0.18 to 0.19 change log
-+ - signaling traces only included hl_type bytes instead of hl_length
-+ bytes
-+ - TNET1570 driver: various fixes (DMA allocation, seg ring overflow,
-+ timeouts, etc.) (Christian Paetz)
-+ - TNET1570 driver: removed most compiler warnings (Christian Paetz)
-+ - listen() on an arequipa_preset() socket and arequipa_preset() on a listening
-+ socket now both return EPROTO
-+ - oops, forgot to enable the "rm" in make uninstall
-+ - kernel didn't set interface number field in act_create messages to atmarpd
-+
-+New features
-+------------
-+
-+ - added ioctl ATM_SETSC to enable or disable RX and TX single-copy per VC
-+ - new device driver operation change_qos (not yet implemented)
-+ - TNET1570 driver supports DEC Alphas and 64 bit PCI transfer (for CIA PCI
-+ chipsets) (Christian Paetz)
-+ - TNET1570 driver also supports the UniNET1570 board (Christian Paetz)
-+ - new functions text2qos and qos2text to convert between textual and binary
-+ QOS specifications (the format is described in man qos)
-+ - atmarp -q ip_addr qos sets the default QOS to use for all VCs created for
-+ that IP interface
-+ - new utility debug/delay to use machine as AAL5-level delay line
-+
-+Other changes
-+-------------
-+
-+ - NLPIDs and vendor-specific application identifiers are now collected in
-+ the new file /usr/include/atmsap.h
-+ - SO_ATMQOS now attempts to change the QOS settings when invoked on an active
-+ connection
-+ - included Matt Welsh's bigphysarea patch (this isn't related to ATM, but it
-+ keeps my development source tree simpler)
-+ - arequipa_preset now initializes max_sdu to RFC1626_MTU+RFC1483LLC_LEN if
-+ zero
-+ - atmarp: new option qos <spec> to set the QOS parameters (uses text2qos)
-+ Use of pcr <pcr> is deprecated.
-+ - ttcp_atm's -P option now also accepts a QOS specification string. (use of
-+ -P <number> is deprecated.
-+ - atmsigd: new option -q <qos> and configuration clause io qos <qos> to
-+ set the QOS of the signaling VC. Use of -P <pcr> or io pcr <pcr> is
-+ deprecated.
-+ - removed the backward compatibility #define class traffic_class in
-+ linux/atm.h
-+ - removed obsolete keywords from atmsigd.conf language
-+ - atmarp -a now also includes QOS parameters
-+ - UBR now respects txtp.max_pcr if set
-+ - new rules for the use of [rt]xtp.traffic_class: both fields must be either
-+ equal or zero, e.g. ATM_CBR in TX and ATM_UBR in RX no longer works
-+ - doc/usage.tex now points to the man pages instead of repeating their content
-+
-+
-+Version 0.18 to 0.19 (27-SEP-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - sscop.c:data_sd had a comparison inversed, so generation of USTAT PDUs was
-+ wrong in some cases (by Juhana Rasanen)
-+ - sigd_enq: accessed vcc->qos without checking for vcc == NULL, causing an
-+ "Oops" in atmaddr
-+ - svc_accept: generated a general protection fault when atmsigd was killed
-+ while a process was waiting for new incoming connections
-+ - atmaddr didn't zero the address structure before calling text2atm
-+ - LANE: fixed usage of kernel timers and LE_ARP_REQUESTs should now get sent
-+ until the entry expires or a response is received (by Marko Kiiskila)
-+ - less compiler warnings from LANE servers (Marko Kiiskila)
-+ - SSCOP: fixed SDU size in AA-RETRIEVE.indication (reported by Heinz Schuerch)
-+ - NULL encapsulation for ATMARP works now (reported by Gerald Hanusch)
-+ - fixed stray EINVAL from get{sock,peer}name on PVCs (reported by Gerald
-+ Hanusch)
-+ - clip now sets max_sdu to RFC1626_MTU+RFC1483LLC_LEN when using LLC/SNAP
-+ encapsulation
-+ - if parsing of a Q.2931 message fails, atmsigd now aborts the call instead of
-+ (stupidly) trying to process the incomplete and probably inconsistent data
-+ - SUNI driver didn't properly mask out unused highest bits of some statistics
-+ counters, thereby yielding absurdly high values
-+ - zatm: changed timing of RX channel closing, so the dreaded "can't close RX
-+ channel" message should be history
-+ - fixed race between Arequipa attachment due to packet reception and closing
-+ of the Arequipa VC
-+ - local address validity check (for ATM_???ADDR) was all wrong (reported by
-+ David Simpson)
-+ - message dumper ignored fatal errors if debugging was not enabled
-+
-+New features
-+------------
-+
-+ - man pages for lecs, les, bus, and zeppelin (Marko Kiiskila)
-+ - configuration file name for les and bus can be defined (Marko Kiiskila)
-+ - zatm: new kernel configuration option CONFIG_ATM_ZATM_EXACT_TS now supports
-+ reception timestamps with microsecond resolution (the accuracy is only in
-+ the ms range, though)
-+ - new utility znth (ZeitNet Timer History) to monitor timer synchronization
-+ - LANE now supports up to 4 LEC network interfaces (Marko Kiiskila)
-+ - the Q.2931 message parser now recovers nicely from IE errors, logs the
-+ event, and continues parsing. The higher layers of the signaling stack
-+ don't use this information yet, though.
-+
-+Other changes
-+-------------
-+
-+ - Arequipa's BHLI now uses a "vendor-specific application identifier" under
-+ the EPFL OUI
-+ - moved buffer/queue handling from lib/libatmd to saal/, because it is rather
-+ SSCOP-specific anyway
-+ - atm_release_vcc now complains if rx_inuse != 0 when closing (if this ever
-+ happens, it may point out dangerous races with upper layer protocols)
-+ - SO_ATMQOS now issues a warning when using UBR with {min,max}_pcr != 0
-+ - max_sdu is now set by atmarpd to MTU+RFC1483LLC_LEN (atmarp could still
-+ override this, if necessary)
-+ - atmdump: new option -i to display the arrival interval instead of the
-+ absolute time. Also changed the time format to be more readable.
-+ - updated the kernel configuration documentation to indicate that the SMC
-+ ATM Power155 adapters are compatible with the Efficient ENI-155
-+ - atmarpd now deletes the old table file (containing stale information) if
-+ invoked with -d (debug)
-+
-+
-+Version 0.17 to 0.18 (9-SEP-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atmsigd didn't respond to SETUP followed by RELEASE with a RELEASE COMPLETE
-+ - atmsigd now implements incoming call rejection (as_indicate -> as_close)
-+ - kernel now opens the VC before sending the as_accept. This a) allows to
-+ check if the parameters are acceptable, and b) avoids a race condition
-+ between the sender and the local VC open procedure, which frequently led to
-+ loss of the beginning of the first PDU sent on a new connection.
-+ - qdump: _q_parse used the wrong length when dumping variable-length fields,
-+ yielding a fatal internal error
-+ - clip didn't set rxtp.max_sdu
-+ - svc_accept didn't set ATM_VF_HASQOS, so getsockopt SO_ATMQOS didn't work
-+ (by Marko Kiiskila)
-+ - ttcp_atm calculated Mbps as 2^20 bits/sec instead of 10^6, thereby making
-+ all results come out approximately 5% too low (by Fraz Ahmad)
-+ - added $(LDLIBS) to linking of lane/lecs (by Lawrence MacIntyre)
-+ - interface number allocation in clip and atmarp did not check for collision
-+ with the respective other name space
-+ - atmarp's -c option didn't work when omitting the "atm" in the interface name
-+
-+New features
-+------------
-+
-+ - new man page: arequipad.8
-+
-+Other changes
-+-------------
-+
-+ - simplified the internal signaling protocol by adding the as_reject message
-+ (sent by kernel in response to as_indicate; not acknowledged by demon)
-+ - packets received from Arequipa are no longer forwarded to other hosts
-+ - further ilmid improvements to use RSTADDR less frequently (by Gerald
-+ Hanusch; with a slight modification)
-+
-+
-+Version 0.16 to 0.17 (2-SEP-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - lib/diag.c didn't fflush when logging to a file
-+ - arequipad didn't accept the -l option
-+ - qgen: possible weird crashes because second.c:find_required accessed
-+ value->tag even if vt_id
-+ - qgen: fixed wrong PC indication in one error message in _q_parse
-+ - make spotless didn't know about new $(*PGMS) targets
-+ - atmsigd: fixed memory leak when sending messages to the kernel
-+ - atmarpd: fixed memory leak when sending messages to the network
-+ - atmsigd: didn't send final as_close when kernel closed connection
-+ immediately after requesting it (as_connect)
-+ - several minor corrections
-+
-+New features
-+------------
-+
-+ - added make target "uninstall" to remove all files installed by
-+ make install
-+ - atmsigd has two new options: -D dump_dir to set the dump directory and
-+ -t trace_length to set the length of the trace buffer
-+ - wrote a few man pages: atmarp.8, atmarpd.8, atmsigd.8, atmsigd.conf.4
-+ - added automatic support for memory debugging if MPR is installed (and
-+ included a patch to make MPR 1.1 work with ELF). atmarpd and atmsigd
-+ currently use this feature.
-+
-+Other changes
-+-------------
-+
-+ - changed "class" to "traffic_class" everywhere
-+ - make install is now implemented in a more elegant way
-+ - q.dump is now much better at finding symbolic names for numbers
-+ - q.dump no longer prints zero-length fields
-+ - qgen no longer includes constructor "microcode" in dumper
-+ - atmarp now gives more informative error messages on ioctl failure
-+ - removed obsolete ioctls SIOCGIFATMADDR and SIOCSIFATMADDR
-+ - added hack to allow ilmid to be less hostile to locally configured addresses
-+ (by Gerald Hanusch; with slight modifications)
-+ - atmarpd now automatically sets ATF_PERM of PVC entries with NULL
-+ encapsulation
-+
-+
-+Version 0.15 to 0.16 (29-AUG-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - fixed an "unterminated character constant" warning by CPP in qgen/uni3x
-+ - atm/sigd/q2931.c always tried to read the Cause IE of RELEASE COMPLETE
-+ messages even if it wasn't included
-+ - LANE: fixed buffer allocation and VCC timeouts (Marko Kiiskila)
-+ - LANE: when connecting directly to LES, name of the ELAN was not set
-+ properly (discoverd by Gerald Hanusch; fixed by Marko Kiiskila)
-+ - LANE, ATMARP, signaling: control sockets didn't account for messages sent
-+ back from demons (fixed by Marko Kiiskila)
-+ - permanent ATMARP entries for SVCs were ignored if no ATMARP server was
-+ configured (reported by Gerald Hanusch)
-+ - atmarp option "temp" mis-spelled as "term" (fixed by Gerald Hanusch)
-+ - forgot to undo experimental rcvbuf/sndbuf change to unsigned long
-+ - make modules didn't generate ATM modules
-+ - atmtcp_attach_hook wasn't defined when compiling ATMTCP as a module
-+ - ATM patch set dev->ip_atm to ether_arp in net/ppp.c and net/eql.c, so they
-+ failed to work as modules
-+
-+New features
-+------------
-+
-+ - added LANE servers (LECS, LES, and BUS) by Marko Kiiskila
-+ - Rules.make: new variable INSTROOT for easier cross-installation
-+ - atmsigd: added option -P to set the maximum PCR used on the signaling VC
-+ - atmarp: added option "pcr <value>" (proposed by Gerald Hanusch)
-+ - added the usual -l <logfile> option to arequipad
-+
-+Other changes
-+-------------
-+
-+ - upgrade to kernel version 2.0.14
-+ - SVCs can now be bound with any SEL value
-+ - messages of size > quota can be sent if the send buffer is empty
-+ - ilmid no longer empties the address list when refreshing the NSAP address
-+ (by Gerald Hanusch)
-+ - LANE client should now survive network reset (e.g. restart) gracefully
-+ (Marko Kiiskila)
-+ - LANE: major cleanup of zeppelin code (Marko Kiiskila)
-+ - improved loadable module support for eni and zatm (i.e. loading works now)
-+ - the message dumper can now be linked to programs that also use the
-+ compilation/parsing functions
-+
-+
-+Version 0.14 to 0.15 (31-JUL-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - zatm: fixed traffic shaper settings for UBR (with a little help from Joern
-+ Wohlrab)
-+ - atmsigd compilation didn't use the same UNI version configuration as qgen
-+ - field "class" in struct atm_traform broke compilation of ATM applications
-+ written in C++, so it has been renamed to "traffic_class" (reported by
-+ Furquan Ansari)
-+ - AAL parameters IE wasn't included in CONNECT, which violated RFC1755
-+ (discovered by Robert Olsson)
-+ - zatm: removed broken sanity check for in-sequence skb delivery on RX
-+ - clip didn't have clip_open function, so SIOCSIFFLAGS on the interface failed
-+ with ENODEV
-+ - single-copy compiles again
-+ - zatm: driver doesn't pretend any longer to support single-copy (but
-+ single-copy will come back later)
-+ - QOS IE was sent with the wrong coding standard when using UNI 3.1 (with help
-+ from Fraz Ahmad)
-+ - zatm: forgot to remove some debugging code (around ZATM_TUNE)
-+ - qlib.c didn't zero the length array, leading to (rare) "not enough space"
-+ errors from QMSG (actually, the "break" mechanism seems to be flaky - will
-+ have to check)
-+ - fixed Arequipa race condition when the upper layer protocol and signaling
-+ decided to close the SVC at the same time
-+ - alloc_tx used to return NULL in out of memory conditions, thereby possibly
-+ hanging atm_sendmsg
-+
-+New features
-+------------
-+
-+ - ttcp_atm now also accepts names with -p
-+ - (finally !) added send/receive buffer limits and cleaned up the use of
-+ vcc->[rt]x_{inuse,quota}
-+ - added mkdiff script for automatic generation of diffs
-+ - Arequipa now works for PVCs too (but arequipad is now required for any
-+ use of Arequipa, not only for incoming connections)
-+
-+Other changes
-+-------------
-+
-+ - atm/atm-<version>.patch is now called atm/atm.patch (to make the diffs more
-+ useful)
-+ - the maximum SDU size is now checked in net/atm/common.c:adjust_tp
-+ - text2atm/atm2text now accepts/generates E.164 addresses with a leading +
-+ sign, as required by ANS (atm95-1532)
-+ - internal signaling protocol: added message as_error to un-overload as_close
-+ - internal signaling protocol: split as_establish into as_connect and
-+ as_accept
-+ - internal signaling prococol: as_close.reply no longer contains positive
-+ numbers
-+ - internal signaling prococol: as_bind now also carries the AAL type
-+ - atmsigd: now also checks the AAL type in as_bind messages
-+ - kernel signaling: a few minor changes
-+ - STANDARDS (i.e. UNI version) configuration option has been moved from
-+ atm/qgen/Makefile to atm/Rules.make
-+ - atmsigd's startup message now gives more useful indication of which UNI
-+ version(s) it supports
-+ - signaling no longer uses sa[sp]_[rt]xtp, so ...
-+ - sa[sp]_[rt]xtp is gone
-+ - removed atm/sigd/svc.c from the distribution. We now have many other tools
-+ for testing SVCs, so it's superfluous.
-+ - atmarpd: revalidation is now less frequent (use -DFREQUENT_REVAL for
-+ the faster timeout)
-+ - ioctl CLIP_PVC now returns the number of the new interface and clip prints
-+ its name to standard output (like atmarp -c)
-+ - clip now issues the CLIP_PVC ioctl after binding, which avoids wasting
-+ interface numbers on failed setup attempts
-+ - atmsigd -d now sets the debug level for qgen and SSCOP to DIAG_INFO, and
-+ doesn't set q_dump
-+ - zatm: added protection against I > M
-+ - atm_peek_aal5 now only aligns to page boundaries for pdu_size >= PAGE_SIZE
-+ - eni driver now spits out CRC error messages at most every other second
-+ - zatm driver now repeats RX error messages at most every other second
-+ - ttcp_atm now sleeps for a second after setting up an SVC, because the
-+ switch seems to lag behind (need to examine this further)
-+ - moved SAAL from sigd/ to saal/ (for sharing with UNI 4.0 signaling)
-+ - Arequipa sockets are now closed via arequipad instead of via atmsigd (new
-+ ioctls AREQUIPA_CTRL and AREQUIPA_CLS3RD)
-+ - various minor changes
-+
-+
-+Version 0.13 to 0.14 (19-JUL-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - LANE: reaction to LE_ARP_RESPONSE's wasn't always correct
-+ - LANE: compiler warnings fixed
-+ - LANE: comparing ATM addresses in checking whether connection is formed was
-+ wrong
-+ - zntune didn't divide by 1024 when displaying the "k"
-+ - .depend wasn't deleted by make spotless
-+ - ATM_GETSTAT and ATM_GETSTATZ used wrong argument type for coding ioctl
-+ number. WARNING: programs using ATM_GETSTAT{,Z} need to be recompiled.
-+ - requests to set up SVCs with ATM_NONE in both directions are now caught by
-+ svc_connect (used to yield an invalid SETUP message)
-+ - signaling: fixed connection identifier setting when acting as network side
-+ (fix by Elwyn B Davies)
-+ - ATMARP server ARP entries were undeletable
-+ - atmarp showed wrong argument in error message when given an invalid ATM
-+ address
-+ - zatm: do_tx left interrupts turned off when returning with RING_BUSY
-+ - LANE ARP hash table handling bugs fixed
-+ - atmarp: act_create is now only sent on interface creation
-+ - atmarp: act_down is now only sent once per transition
-+ - demon control SVCs are no longer closed when atmsigd dies (new VCC flag
-+ ATM_VF_META)
-+ - netdevice notifier is now properly unregistered when atmarpd goes down
-+ (not doing so caused endless loop in kernel on atmarpd restart)
-+ - sigd_enq{_atomic} never calls schedule()
-+ - atmsigd no longer "forgets" to bring up ARP server SVC before sending an
-+ InARP
-+ - atmarpd no longer dies with "timer in state 3" when the ARP server becomes
-+ unreachable
-+ - atm/atmarp.c: clip_create() now refuses creation of already existing
-+ interface
-+ - Documentation/Configure.help gave an obsolete URL for CONFIG_AREQUIPA
-+ and doc/usage.tex also mentioned the old file name
-+ - Arequipa didn't work in the outbound direction for TCP, because
-+ net/ipv4/tcp.c was missing in the kernel patch
-+ - drivers/atm/eni.c:foo raced with initialization of eni_boards if the
-+ board lost the signal _immediately_ after being initialized
-+ - atmarpd: fixed a few uninitialized entry->timer pointers (discovered by
-+ Gerald Hanusch)
-+ - atmarpd: arps entry should no longer get stuck in as_resolv
-+
-+New features
-+------------
-+
-+ - compiles on SparcLinux too (but only atmtcp works)
-+
-+Other changes
-+-------------
-+
-+ - upgrade to kernel version 2.0.0
-+ - BHLI matching changed: SAPs without BHLI are now incompatible with calls
-+ that specify a BHLI
-+ - LANE: interface stays up when zeppelin dies -> possibility for
-+ wrapper script around zeppelin
-+ - LANE: LUNI interoperability test (ATM Forum/96-0805) is now followed
-+ in setting ELAN name in LE_CONFIG_RESPONSE and LE_JOIN_RESPONSE,
-+ there is also a delay of 1 second before sending LE_CONFIG_REQUEST and
-+ LE_JOIN_REQUEST. This allows 'slow' LE servers to catch up.
-+ - LANE: no longer uses sa[sp]_[rt]xtp
-+ - LANE: now adjusts better to ATM address changes
-+ - zeppelin: new option -m to select debugging output
-+ - updated aping, aread, awrite, br, bw, atmdump, ilmid, atmarp, clip, atmarpd,
-+ and zeppelin to use setsockopt SO_ATMQOS
-+ - added option -x for ilmid to disable variable bindings (caused
-+ interoperability problems with certain switches, e.g. the LS100)
-+ - changed SO_CIRANGE into a pair of ioctls
-+ - changed return value of fetch() (passed to atm_vcc->peek) from unsigned long
-+ to __u32
-+ - atmarp now accepts arpsrv option also for -d
-+ - zatm driver can now also read ESIs of rev. 10 boards (with help from Nikos
-+ Anerousis)
-+ - awrite: fixed txtp.max_sdu calculation in awrite (was using uninitialized
-+ variable "offset")
-+ - atmarpd: IP interface removal now has the desired effect (used to do
-+ nothing)
-+ - atmarpd: now reports and ignores unexpected interface transitions
-+ - added sigd_enq_atomic for atomic sigd_enq (so that non-Arequipa SVCs can
-+ still use the "safe" but non-atomic version)
-+ - made SIOCGIF* failures in atmarpd non-fatal (itf.c:itf_up was handling them
-+ anyway)
-+ - moved Arequipa-specific code from net/atm/clip.c to net/atm/arequipa.c, and
-+ put code common to CLIP, Arequipa, and - to a lesser extent - ATMARP into
-+ net/atm/ipcommon.[ch]
-+ - Arequipa can now be complied without CLIP
-+ - various minor documentation changes
-+ - moved ATM device initialization from net/atm/pvc.c to drivers/block/genhd.c,
-+ where most other devices are initialized too
-+ - preparation for new binary locations: tools build process now knows about
-+ four types of programs: for booting, for system use, for users, and for
-+ internal use during build
-+ - make install now hides the for loops
-+ - non-user binaries are now installed in /usr/local/sbin
-+ - struct atm_iobuf.buffer is now of type void * (was int*). Also,
-+ ATM_GETNAMES now returns the length in bytes in that field.
-+
-+
-+Version 0.12 to 0.13 (7-JUN-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - BHLI type used the ATM_HL_* values (which are off by one) in qgen/uni3x
-+ - atmarpd ended up in a tight select-accept loop if atmsigd went away
-+ - removed sleep in ZATM's do_tx (so it works with IP over ATM again)
-+
-+New features
-+------------
-+
-+ - added experimental support for Application requested IP over ATM (Arequipa),
-+ prototyped by Jean-Michel Pittet
-+ - new traffic class ATM_ANYCLASS to accept incoming SVCs without looking at
-+ the traffic parameters
-+ - added (untested) support for SO_BCTXOPT/SO_BCRXOPT
-+
-+Other changes
-+-------------
-+
-+ - SVCs used to listen are now marked as "LISTEN" in /proc/atm/svc
-+ - added option -Q <atm_addr> to ttcp_atm to support AREQUIPA
-+ - cleaned up the FILE macro and removed atm_dir in net/atm/proc.c
-+
-+
-+Version 0.11 to 0.12 (3-JUN-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - atm/lib/Makefile: had to comment out PGMS=test
-+ - distribution didn't include atm/doc/usage.txt
-+ - patch didn't include arch/i386/config.in
-+ - return 0; was missing at the end of net/atm/mmuio.c:mmu_step
-+ - atm/ilmid didn't install into INSTBIN; also made some other Makefile
-+ changes
-+ - read() returned garbage instead of error when network drops connections
-+ - POLL_AFTER_RETRANSMISSION in SSCOP didn't even compile
-+ - SVCs: bind to wildcard addresses should now work even if no local address
-+ is known yet
-+ - make clean in atm/qgen left some dirt
-+ - ATM drivers didn't free skbs when detecting an error in TX direction
-+ - SIOCMKCLIP was in the wrong #ifdef, so CLIP had to be enabled to make
-+ ATMARP usable
-+ - signaling didn't respond properly to messages with non-existent call
-+ reference
-+
-+New features
-+------------
-+
-+ - merged in LAN Emulation client support written by Marko Kiiskila
-+ - new socket option SO_ATMQOS at SOL_ATM to set/get QOS parameters
-+
-+Other changes
-+-------------
-+
-+ - t2a.pl now also works with Perl 5.001
-+ - changed the TX side of the ZATM driver to use a ring instead of a list in
-+ order to improve stability and throughput (needs some more testing)
-+
-+
-+Version 0.10 to 0.11 (21-MAY-1996)
-+====================
-+
-+Bug fixes
-+---------
-+
-+ - README.DRIVERS still referenced INSTALL (it's now in USAGE)
-+ - sap_decode didn't clear BLLI part of address structure
-+ - trying to connect to NULL address fails locally instead of yielding an
-+ invalid SETUP message
-+ - bind now properly sets the local address
-+ - SVC getname now returns the traffic parameters
-+ - oops, zatm open_tx didn't return PCR
-+ - awrite printed errors for connect() as "bind: ..."
-+ - atmsigd no longer generates dummy call references (0x7fffff)
-+ - atmtcp: changed a few kfree_skb to dev_kfree_skb, which should make it
-+ work better (does anybody care to try ?)
-+ - some more dev_kfree_skb fixed for control messages from or to demons (led
-+ to some minor memory leaks)
-+ - various major fixes for CBR SVCs
-+ - RELEASE was signaled for SVCs before all data was sent
-+ - single copy tried to access mem_map with user space addresses, leading to
-+ crashes or worse
-+ - zatm: sleep_on was racing with TX completion in close_tx, leading to hangs
-+ - zatm: now fails attempts to open AAL0 VCs (used to accept them and to
-+ crash later)
-+ - BHLI encoding/decoding was broken in several ways
-+
-+New features
-+------------
-+
-+ - hacked in primitive leaf-only p2m support (based on an idea by Marko
-+ Kiiskil{)
-+ - the socket layer, and the zatm, eni, and atmtcp drivers now support
-+ two-phase connect
-+ - PVCs now respect max_pcr (SVCs can't for now)
-+ - lib/diag.c can now also log to a file or to syslog, and atmarpd, atmsigd,
-+ and ilmid now have a -l option to use that
-+ - new option -c config_file for atmsigd
-+ - zatm and atmtcp now also support timestamps (but zatm timestamps can be
-+ improved a lot by using the timestamps the uPD98401 generates)
-+ - Classical IP over ATM support is now configurable
-+ - added on-line help texts for configuration
-+ - added atm/test/aping, a round-trip tester for PVCs
-+ - added "flags" field to struct atm_dev and to atm_dev_register, on request
-+ by Bureau 13
-+
-+Other changes
-+-------------
-+
-+ - past versions of the BUGS list aren't included in the distribution anymore
-+ because I didn't update them anyway
-+ - invalid connect() calls now return an error instead of panicing atmsigd
-+ - text2atm no longer clobbers sas_addr.{blli,bhli}
-+ - greatly simplified zatm traffic shaper settings calculation (and it's
-+ better than before too)
-+ - atmsigd: diagnostics class "sig" (in atmsigd.conf) now also includes "SAP"
-+ - DPRINTK now uses GNU-specific #define foo(bar...)
-+ - signaling: PCR is now also indicated (0) for directions in which ATM_NONE
-+ is requested, which is probably "cleaner" (for CBR)
-+ - added logging priorities to most printks
-+ - the default location for atmsigd.conf changed from . to /etc
-+ - ipv4/af_inet.c: atmtcp_attach_hook is now only included when using ATM over
-+ TCP
-+ - configuration options for extended driver debugging, (old) CLIP, and
-+ ATM over TCP are turned off by default
-+
-+
-+Version 0.9 to 0.10 (21-MAR-1996)
-+===================
-+
-+Bug fixes
-+---------
-+
-+ - zatm: deallocated UBR shaper when closing UBR VC, which the other UBR VCs
-+ didn't really appreciate
-+ - fixed nasty memory leak for native ATM (spotted by Rolf Fiedler)
-+
-+New features
-+------------
-+
-+ - added Rolf Fiedler's driver for his adapter based on the TI TNETA1570
-+ - single-copy is back again !
-+
-+Other changes
-+-------------
-+
-+ - eni buffers are now slightly (50%) bigger, allowing for more effective
-+ overlapped operations
-+ - documented zntune
-+
-+
-+Version 0.8 to 0.9 (14-MAR-1996)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - oops, accidently removed ZN1221 from drivers/pci/pci.c (so /proc/pci
-+ reported it as "unknown")
-+ - sigd didn't poll for the default interface on startup
-+ - atmarpd didn't initialize timer field in newly allocated table entries,
-+ which led to crashes
-+ - removed a few stray debugging printks in net/atm/svc.c:svc_bind
-+ - ATMARP tried to send queued packet before adding new table entry, so the
-+ packet was always discarded
-+ - sigd/sap.c: didn't allow to use different traffic classes for fwd and bwd
-+ direction
-+ - atm2text accepted SVC addresses of all zeroes
-+ - atmsigd didn't refresh its local address list properly after ilmid restart
-+ - net/atm/common.c: returned positive error codes (-vcc->reply) instead of
-+ negative ones
-+ - forgot to include maint/zntune.c in the distribution
-+
-+New features
-+------------
-+
-+ - sigd/svc now accepts ATM addresses in all formats supported by text2atm
-+
-+Other changes
-+-------------
-+
-+ - upgraded to kernel version 1.3.73
-+ - the called party number must now match the local address (if bound)
-+ - renamed ttcp.atm to ttcp_atm
-+ - all executables are now explicitly linked (so make works even without
-+ dependencies)
-+
-+
-+Version 0.7 to 0.8 (12-MAR-1996)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - fixed stray segmentation violation in arpd/arp.c:learn
-+ - fixed coding standard of the QoS IE if using UNI 3.0 (and made coding
-+ standard variable)
-+ - made coding standard variable for Cause IE
-+ - SSCOP didn't properly set N(MR)
-+ - list elements in STAT PDUs had host byte order
-+ - SSCF didn't call sscop_estab_resp on restart (AA-EST.ind in 1/1)
-+ - signaling didn't handle SAPs with >= 2 BLLI IEs properly
-+ - uni3x: iso_hli and user_hli were confined to 7 bytes, but UNI allows up to 8
-+ - q_read choked on non-variable-length fields
-+ - qgen sometimes didn't read all IEs of a signaling message
-+ - fixed usage line of test/bw
-+ - qgen no longer complains about missing required fields after a break
-+ - fixed compiler warning in zntune.c
-+ - fixed ATMARP table additions (caused GPF when flushing ATMARP entry at
-+ the end of the table and possibly other problems)
-+ - qgen: q_put or'ed data instead of overwriting it, which caused problems
-+ only on surprisingly few occasions
-+
-+New features
-+------------
-+
-+ - atm2text and text2atm now also do name lookups via a /etc/hosts.atm file
-+ - atmaddr, atmarpd, and atmsigd now pretty-print addresses using name
-+ translation (unless invoked with -n)
-+ - atmarpd now dumps its table into /var/run/atmarpd.table and atmarp -a
-+ reads it from there
-+ - started modularizing the ENI and ZATM drivers
-+ - ilmid and atmsigd now support multiple interfaces (untested)
-+
-+Other changes
-+-------------
-+
-+ - the documentation is now available in LaTeX and in ASCII
-+ - rewrote most of the SAP handling code (now everything is in sigd/sap.c)
-+ - proto.c:lookup_sap now picks wildcard SAP last
-+ - signaling always includes SSCS type = 0 in SETUP messages (for LANE)
-+ - changed the message format for the the kernel-demon signaling protocol
-+ - qgen is now a bit more tolerant when being fed with bad data
-+ - qgen now assumes that q_report(Q_FATAL,...) doesn't return
-+ - marked sigd/test.c as obsolete
-+ - svc_accept failing in atm_connect no longer returns success
-+ - atmsigd -n is now atmsigd -N
-+ - qgen now puts the PC in q.out.c and qd.out.c at the beginning of the code
-+ line and not on a line by itself
-+
-+
-+Version 0.6 to 0.7 (2-FEB-1996)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - removed TTL setting ioctl (1234) used for something entirely unrelated to
-+ ATM, oops
-+ - changed kfree_skb in atm_pop_raw to dev_kfree_skb (this fixes the socket
-+ "leak")
-+ - more unusual configurations (no PCI, no IP, no /proc) should compile now
-+ - atm_equal didn't recognize wildcards in embedded E.164 addresses
-+ - fixed net/atm/proc.c:svc_addr (too many bugs to mention)
-+ - atmarpd didn't check for ARP traffic on inbound connections
-+ - atmarpd didn't properly merge incoming connections with existing entries
-+ - various other ATMARP fixes
-+ - free list was too short in ENI driver for worst case fragmentation on
-+ 2 MB boards
-+ - signaling didn't set ISO/IEC TR9577 IPI and NLPID correctly in active open
-+ - getname looked at *sockaddr_len, which is uninitialized (need to fix this
-+ later in the common socket code)
-+ - SSCOP generated incorrect error code ("1" instead of "B") for BGN PDU
-+ problems
-+
-+New features
-+------------
-+
-+ - new ioctls ATM_GETADDR, ATM_RSTADDR, ATM_ADDADDR, and ATM_DELADDR to
-+ manage local ATM addresses
-+ - signaling now handles incoming RESTART, SAAL failure, and SAAL
-+ re-establishment
-+ - ATMARP now times out idle connection; ATMARP_MKIP ioctl takes a timeout
-+ argument
-+ - ATMARP (kernel) now queues one skb per pending ARP request and limits the
-+ rate of requests for the same address (default 2 req/min)
-+ - atmsigd now prints cause values when receiving a RELEASE or a RELEASE
-+ COMPLETE and returns more informative error codes
-+ - atmarpd falls back to PVC-only operation if signaling is unavailable at
-+ startup
-+ - kernel can now assign next free number on IP interface creation (atmarp
-+ prints the interface name)
-+ - qgen -D generates a Q.2931 message dumper (see USAGE for details)
-+ - qgen now checks for proper use of repetition indicator (but doesn't
-+ support repeated IEs yet)
-+ - protocols and device drivers can now use their own memory allocator in the
-+ TX direction by changing vcc->alloc_tx
-+
-+Other changes
-+-------------
-+
-+ - upgraded to kernel version 1.3.53
-+ - build process now uses Perl
-+ - ATM ioctls writing back data now always return the size of the data
-+ structure written
-+ - struct atmif_sioc now has a length field (recompile all atmarpd, ilmid,
-+ debug/ed, and everything in maint)
-+ - PHY driver no longer has to check validity (permissions and access) for
-+ "standard" ioctls
-+ - signaling should now also work on an interface > 0 (but there's still only
-+ one interface using signaling per host)
-+ - make install now adds /usr/include/atm.h and /usr/include/atmd.h
-+ - atmarpd now also displays if SVC has been opened actively or passively
-+ - atmaddr(8) now uses new ioctls and has different command-line syntax
-+ and even has a man page
-+ - example IP addresses in USAGE now conform to RFC1597
-+ - diagnostics now also include the application name (optional)
-+
-+
-+Version 0.5 to 0.6 (21-DEC-1995)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - ARP ioctls stopped working for most non-ATM devices, oops
-+ - ATMTCP driver counted lack of memory as rx_err instead of rx_drop
-+ - select on driver using polling may have hung
-+ - atmarp man page and usage didn't indicate that the interface number is
-+ optional
-+ - restricted atmarpd and signaling control, and SIOCSIFATMADDR to the super
-+ user
-+ - atmtcp: fixed handling of VPI/VCI <= 0 for setsockopt(SO_CIRANGE)
-+ - eni and zn driver had static UBR shaper pointer, making it difficult to have
-+ more than one such device per system
-+ - eni driver initialization didn't work properly in systems with ASIC Tonga
-+ - suni.[ch]: confused MC (Master Config) and MCT (Master ConTrol) registers
-+ - (SVC) accept now returns PVC -EAGAIN as -EBUSY because the operation cannot
-+ be retried
-+ - qgen: fixed several bugs in case handling (and made defaults work for
-+ parsing)
-+ - svc_dup passed PF_ATMSVC instead of AAL to svc_create
-+ - plugged a few skb leaks in svc_accept
-+ - text2atm didn't properly NUL-terminate E.164 addresses
-+
-+New features
-+------------
-+
-+ - ZN1221 driver works partially for AAL5 (still hangs after a few dozen MB)
-+ (also wrote maint/zntune to monitor/adjust free buffer pools)
-+ - ENI driver now supports new Tonga ASIC boards
-+ - added Scott Shumate's ILMI demon (for automatic address registration)
-+ - text2atm: added wildcard support for SVCs (syntax: addr/bits)
-+ - new library function atm_equal to compare SVC addresses
-+ - new ioctl ATM_GETTYPE to obtain interface type name
-+ - new ioctl ATM_GETESI to obtain ESI (parallels /proc/atm/devices)
-+ - new ioctls SONET_SETFRAMING, SONET_GETFRAMING, and SONET_GETFRSENSE to
-+ handle SONET vs. SDH framing
-+ - added socket option SO_AALTYPE (SOL_AAL) to query AAL type (getsockopt
-+ only)
-+ - signaling demon is now notified on address changes (new message
-+ as_itf_notify)
-+
-+Other changes
-+-------------
-+
-+ - known bugs are now listed in a file called BUGS
-+ - all utility programs (aread, awrite, atmdump, br, bw, clip, ttcp) now use
-+ the notation [itf.]vpi.vci for PVCs (was itf vpi vci , except for ttcp,
-+ where it was only vpi vci (no itf))
-+ - all ioctl values have changed
-+ Note: most programs have to be recompiled because of this
-+ - sigd and arpd now register their control sockets via ioctls
-+ - (old) clip now creates interfaces with an ioctl
-+ - text2atm now returns the wildcard length, i.e. a non-zero return value
-+ no longer implies failure
-+ - push_oam now returns an int (was void)
-+ - push_oam now has several flags (in a bit set) instead of the immed
-+ argument
-+ - the peek function must now update the statistics if it rejects a packet
-+ - (ATM device) close is now only invoked after a successful open
-+ - the SUNI_GETLOOP ioctl now has an int * argument (was unsigned long *)
-+ - uPD98402 driver no longer tries to detect return of the signal (didn't
-+ work anyway - would have to sample section errors)
-+ - ATMARP no longer supports mixed PVC/SVC entries (I'm sure this will be
-+ missed a lot :-)
-+ - ATMARP no longer supports "IP address discovery" via InARP for PVCs
-+ (maybe later)
-+ - specifying an invalid AAL now yields EPROTOTYPE
-+ - specifying an invalid address family (connect, bind) now yields EAFNOSUPPORT
-+ - make install now also installs libraries (in /usr/lib)
-+ - improved many header file comments
-+ - re-arranged some comments to simplify automated document generation
-+ - added copyright statement
-+ - UNI 3.0 IE fields are now always recognized (but we shouldn't generate them)
-+ - UNI 3.0 wants octet 5a when using BCOB-X, so we'll set it to twice "No
-+ indication"
-+ - aread, awrite, br, bw, ttcp, atmsigd, and atmdump now set max_sdu
-+ - aread and awrite no longer print strerror(errno) on success
-+
-+
-+Version 0.4 to 0.5 (26-OCT-1995)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - now only root can open a CLIP socket (thereby creating an IP interface)
-+ - now only root can issue CLIP_NULENCAP and CLIP_LLCENCAP ioctls
-+ - atmdump: forgot default in getopt switch
-+ - eni driver: called misc_int on every interrupt
-+ - Q.2931 message description: various fixes and improvements
-+ - linux/atm.h: ATM_*_UNSPEC used the same value as ATM_*_ANY, oops !
-+ - SSCOP is now more careful about not accessing the descriptor if it might
-+ possibly have been deleted
-+ - typo in SSCF leading to wrong response to AA-RECOVER.indication
-+ - SSCOP now correctly copies N(PS) from POLL to STAT PDUs
-+ - SSCF now discards data when not ready instead of issuing a fatal error
-+ - AAL initialization failure no longer leaks memory
-+ - closing an SVC without VCC no longer yields a GPF
-+
-+New features
-+------------
-+
-+ - ZN1221 driver is starting to work
-+ - new, ARP-based mechanism for IP over ATM (with atmarpd, atmarp, etc.)
-+ - /proc/atm/pvc now displays more information for CLIP PVCs (after a patch
-+ by Raghavan Menon)
-+ - added max_pcr to struct atm_trafprm (also fixed a few comments in atm.h)
-+ Note: all programs using sockaddr_atm* will have to be recompiled.
-+ - qgen now handles value lists in named selections
-+ - signaling now supports bhli/blli, plus various other minor extensions
-+ - new ioctls to set/get local ATM address
-+ - added library with address to/from text conversion functions
-+ - finally implemented getname()
-+
-+Other changes
-+-------------
-+
-+ - eni driver: avoided potential generation of superfluous code if extended
-+ debugging is disabled
-+ - eni driver: detects new boards using ASIC PCI chip (doesn't support them
-+ yet, though)
-+ - qgen: semicolon is now comment character and no longer used to terminate
-+ clauses
-+ - qgen: replaced term "item" with "field"
-+ - linux/include/atmsap.h: removed obsolete comment "protocol cannot be fully
-+ encoded in current structure". Also re-arranged some comments to simplify
-+ automated document generation.
-+ - saal,sscf,sscop: callbacks don't pass the pointer to the descriptor of the
-+ calling protocol anymore
-+ - SSCOP no longer prints a number for non-'V' errors
-+ - improved handling of STATUS messages
-+ - select now indicates ready for writing if max_sdu packet can be enqueued
-+ without blocking
-+ - select can now also be used to check status of non-blocking connect
-+ - moved some common demon functions from sigd into a common demon library
-+
-+
-+Version 0.3 to 0.4 (27-SEP-1995)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - various minor documentation fixes
-+ - clip.c:atm_push_clip now updates statistics before forwarding the skb to
-+ the upper layer (which may free and overwrite the skb)
-+
-+New features
-+------------
-+
-+ - added partial UNI 3.x signaling
-+ - added various adapter debugging programs to the distribution
-+ - new config option CONFIG_ATM_ENI_DEBUG to enable extended debugging
-+ in eni driver
-+
-+Other changes
-+-------------
-+
-+ - upgraded to kernel version 1.3.24
-+ - changed the distribution directory structure (programs are now in maint/,
-+ test/, ip/, debug/, and sigd/, see INSTALL)
-+ - ATM interfaces are no longer named, only numbered. This affects the
-+ ATM_GETNAMES ioctl, all ioctls using struct atmif_sioc, the usage of atmdiag
-+ and sonetdiag, and various diagnostic kernel messages.
-+ - ATM socket state is now recorded in field "flags" (this also replaces the
-+ SVC fields "released", "registered", and "state")
-+ - added #ifdef __KERNEL__ to some header files
-+ - added "int immed" argument to send_oam
-+ - some minor modifications to the distribution process (mkdist)
-+ - removed devmap.c
-+ - SVC sockets no longer hang if the signaling demon dies
-+
-+
-+Version 0.2 to 0.3 (8-SEP-1995)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - select(2) didn't work (was sleeping on sock->wait instead of
-+ &ATM_SD(sock)->sleep)
-+ - ENI driver did allow binding to VPI/VCI already in use
-+ - ENI driver now properly handles PDUs with CRC errors
-+ - ENI driver had race condition when discarding PDUs causing new PDUs to be
-+ shifted in adapter memory by one word (which confused the driver quite a
-+ bit)
-+ - ENI driver now enables VC _after_ setting all pointers (caused crashes if
-+ data was already coming in while opening VC)
-+ - various bugs fixes related to SVC sockets
-+ - fixed GPF (in kernel) when running atmdiag without arguments
-+ - atmdiag now left-adjusts interface names
-+ - fixed ttcp.atm crash when not specifying vpi.vci
-+ - clip_xmit now checks for NULL vcc (e.g. after failure to connect)
-+
-+New features
-+------------
-+
-+ - zatm driver now reads ESI correctly
-+ - blocking svc_connect is now interruptible
-+ - atmdump now also displays the numeric PTI value of incoming cells
-+ - added RX/TX buffer quotas (default is 64 kB)
-+ - added OAM hooks to device driver interface (but there's no OAM support yet)
-+
-+Other changes
-+-------------
-+
-+ - ENI driver now checks ID field of reassembly buffer descriptors
-+ - ENI driver now uses vremap
-+ - ENI driver now prints more useful physical layer type information (e.g.
-+ "MMF" and "UTP" instead of "UTOPIA")
-+ - some redesign of the protocol used for signaling between kernel and demon
-+ - disabled "Grr, servicing VCC twice" message in ENI driver
-+ - device drivers now have to adapt AAL0 cell header byte order
-+ - some cleanup in common.c:atm_getsockopt
-+ - device drivers are now required to use the peek function; protocols now
-+ must provide it
-+
-+
-+Version 0.1 to 0.2 (15-AUG-1995)
-+==================
-+
-+Bug fixes
-+---------
-+
-+ - VCC family field is now correctly set to protocol family in
-+ common.c:atm_create (was pvc.c:pvc_create). With protocol set to zero,
-+ this created all types of strange problems, because the family field
-+ is used to indicate whether an VCC slot is busy/free.
-+ - fixed race condition in common.c:atm_read (reader might have blocked
-+ even if data is ready)
-+ - fixed dereferencing of uninitialized skb->dev pointer in
-+ clip.c:atm_push_clip
-+ - SIOCSIFATMTCP now refuses to attach the same socket twice
-+ - zatm.c: fixed setting of the VPI/VCI mask
-+ - USAGE said ttcp uses -B for the bandwidth, but it's -P
-+ - mkdist didn't include man pages
-+
-+New features
-+------------
-+
-+ - added some /proc/atm functionality
-+ - added support for ATM_{VPI,VCI}_ANY
-+ - SIOCSIFATMTCP now returns the interface number and atmtcp(8) prints it
-+ - wrote atmtcp man page
-+ - added kernel part of SVC support
-+
-+Other changes
-+-------------
-+
-+ - common.c: only root is now allowed to bind to reserved VCIs
-+ - Classical IP interfaces are now removed by downing by ifconfig; clip(8)
-+ returns immediately
-+ - PVC-connect for non-existing device now returns ENODEV instead of EINVAL
-+ - new field (type) in struct atm_dev to indicate device type
-+ - moved getsockopt(SO_CIRANGE) to common.c (removed atmtcp's own version)
-+ - added ci_range to struct atm_dev (and removed it from atmtcp's private
-+ structure)
-+ - added code to read the ESI to zatm.c (but that code doesn't seem to work
-+ yet)
---- linux-atm-2.4.1.orig/debian/atm-tools-br2684.manpages
-+++ linux-atm-2.4.1/debian/atm-tools-br2684.manpages
-@@ -0,0 +1 @@
-+debian/tmp/usr/share/man/man8/br2684ctl.8
---- linux-atm-2.4.1.orig/debian/atm-tools.atm
-+++ linux-atm-2.4.1/debian/atm-tools.atm
-@@ -0,0 +1,27 @@
-+#!/bin/sh
-+# Start/stop the atm daemon(s).
-+
-+DAEMON="/sbin/atmarpd"
-+
-+test -f $DAEMON || exit 0
-+
-+case "$1" in
-+start) echo -n "Starting ATM ARP Daemon: "
-+ start-stop-daemon --start --quiet --exec $DAEMON -b
-+ /bin/sleep 2
-+ echo "atmarpd."
-+ ;;
-+stop) echo -n "Stopping ATM ARP Daemon: "
-+ start-stop-daemon --stop --quiet --exec $DAEMON
-+ echo "atmarpd."
-+ ;;
-+restart|force-reload) echo -n "Re-starting ATM ARP Daemon: "
-+ start-stop-daemon --stop --quiet --exec $DAEMON
-+ start-stop-daemon --start --quiet --exec $DAEMON -b
-+ /bin/sleep 2
-+ echo "atmarpd."
-+ ;;
-+*) echo "Usage: /etc/init.d/atm start|stop|restart|force-reload"; exit 1
-+ ;;
-+esac
-+exit 0
---- linux-atm-2.4.1.orig/debian/atm-tools.docs
-+++ linux-atm-2.4.1/debian/atm-tools.docs
-@@ -0,0 +1,4 @@
-+BUGS
-+README
-+doc/README.tc
-+debian/README.br2684
---- linux-atm-2.4.1.orig/debian/control.old
-+++ linux-atm-2.4.1/debian/control.old
-@@ -0,0 +1,72 @@
-+Source: linux-atm
-+Section: net
-+Priority: optional
-+Maintainer: Peter De Schrijver (p2) <p2@mind.be>
-+Build-Depends: debhelper (>> 4.0.0), bison, flex, perl, dpatch, automake1.4
-+Standards-Version: 3.6.1
-+
-+Package: atm-tools
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Description: Base programs for ATM in Linux, the net-tools for ATM
-+ This package provides all the basic programs needed for setting up,
-+ monitoring and tuning ATM networks. Such as:
-+ * atmsigd, an ATM signal daemon that implements the ATM UNI protocol.
-+ * atmtcp, a tool to setup ATM over TCP connections.
-+ * atmarpd, an implementation of the ATMARP protocol (RFC1577, RFC1755)
-+ * zeppelin, an ATM LAN Emulation client daemon
-+ * les and bus, ATM LAN Emulation service daemons
-+ .
-+ Notice that upstream still flags these tools as experimental software and
-+ says that there is still a number of known bugs and issues. The
-+ software is, however, in productive use at a number of sites and is
-+ working reliably.
-+ .
-+ Homepage: http://linux-atm.sourceforge.net/
-+
-+Package: atm-tools-br2684
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Description: br2864ctl - RFC1483/2864 Bridge Daemon for ATM Networks
-+ br2684ctl handles RFC1483/2684 bridged PDUs. This is most often
-+ used in ADSL scenarios where usually the subscribers' ethernet
-+ traffic is encapsulated in ATM AAL5 (by bridging ADSL modems)
-+ according to RFC2684
-+ .
-+ The sources for br2684ctl has been pulled from linux-atm's CVS
-+ repository. Warning: This is unreleased software that can break any
-+ time, any place. If it does, you get to keep the pieces. linux-atm's
-+ upstream flags even the released software as experimental software.
-+ There is still a number of known bugs and issues.
-+
-+Package: atm-dev
-+Depends: libatm1-dev
-+Architecture: all
-+Section: oldlibs
-+Description: Development files for compiling ATM programs (dummy package)
-+ This dummy package provides a transition from the previous atm packages.
-+ It is provided for backwards compatibility only and may be removedafter
-+ the upgrade has completed or when when no other package depend on it.
-+
-+Package: libatm1
-+Section: libs
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Conflicts: atm-tools (<< 2.4.1-6)
-+Description: shared library for ATM (Asynchronous Transfer Mode)
-+ Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
-+ .
-+ Homepage: http://linux-atm.sourceforge.net/
-+
-+Package: libatm1-dev
-+Section: libdevel
-+Architecture: any
-+Depends: libc6-dev, libatm1
-+Replaces: atm-dev (<< 2.4.1-7)
-+Conflicts: atm-dev (<< 2.4.1-7)
-+Provides: libatm-dev
-+Description: Development files for compiling ATM programs
-+ Header files and development libraries for compiling ATM (Asynchronous
-+ Transfer Mode) related programs.
-+ .
-+ Homepage: http://linux-atm.sourceforge.net/
---- linux-atm-2.4.1.orig/debian/atm-tools.install
-+++ linux-atm-2.4.1/debian/atm-tools.install
-@@ -0,0 +1,18 @@
-+debian/tmp/usr/share/man/*
-+debian/tmp/usr/bin/*
-+debian/tmp/usr/sbin/atmsigd
-+debian/tmp/usr/sbin/atmaddr
-+debian/tmp/usr/sbin/esi
-+debian/tmp/usr/sbin/atmloop
-+debian/tmp/usr/sbin/atmtcp
-+debian/tmp/usr/sbin/enitune
-+debian/tmp/usr/sbin/zntune
-+debian/tmp/usr/sbin/atmarp sbin
-+debian/tmp/usr/sbin/atmarpd sbin
-+debian/tmp/usr/sbin/ilmid
-+debian/tmp/usr/sbin/zeppelin
-+debian/tmp/usr/sbin/les
-+debian/tmp/usr/sbin/bus
-+debian/tmp/usr/sbin/lecs
-+debian/tmp/usr/sbin/mpcd
-+debian/tmp/etc/atmsigd.conf
---- linux-atm-2.4.1.orig/debian/atm-tools.manpages
-+++ linux-atm-2.4.1/debian/atm-tools.manpages
-@@ -0,0 +1 @@
-+debian/atm-tools.8
---- linux-atm-2.4.1.orig/debian/atm-tools.pod
-+++ linux-atm-2.4.1/debian/atm-tools.pod
-@@ -0,0 +1,27 @@
-+=head1 NAME
-+
-+linux-atm - preliminary manpage
-+aread
-+awrite
-+enitune
-+ilmid
-+saaldump
-+sonetdiag
-+ttcp_atm
-+zntune
-+
-+=head1 DOCUMENTATION
-+
-+atm-tools is a package containing the basic tools that are needed for
-+setting up, monitoring, and tuning ATM networks. All available
-+documentation can be found in /usr/share/doc/atnm-tools in Debian
-+systems, and on the Web on: http://linux-atm.sourceforge.net.
-+
-+=head1 BUGS
-+
-+Many. Be prepared to debug.
-+
-+=head1 AUTHOR
-+
-+This manpage was written by Marc Haber for linux-atm packaging in
-+Debian/GNU Operating System.
---- linux-atm-2.4.1.orig/debian/changelog
-+++ linux-atm-2.4.1/debian/changelog
-@@ -0,0 +1,212 @@
-+linux-atm (2.4.1-17) unstable; urgency=low
-+
-+ * Fix build problem with gcc 4.0 (Closes: )
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Thu, 17 Mar 2005 23:02:03 +0100
-+
-+linux-atm (2.4.1-16) unstable; urgency=low
-+
-+ * Fix build problem with gcc 3.4 (Closes: #259422)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Thu, 15 Jul 2004 14:28:10 +0200
-+
-+linux-atm (2.4.1-15) unstable; urgency=low
-+
-+ * Updated descriptions (Closes: #239161)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 4 Apr 2004 21:10:20 +0200
-+
-+linux-atm (2.4.1-14) unstable; urgency=low
-+
-+ * Fix symlink for /usr/lib/libatm.so (Closes: #221011)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 7 Dec 2003 21:53:19 +0100
-+
-+linux-atm (2.4.1-13) unstable; urgency=low
-+
-+ * Previous version fixed #217259, but no changelog entry (Closes: #217259)
-+ * Previous version fixed #216662, but no changelog entry (Closes: #216662)
-+ * Added missing build dependency on automake1.4 (Closes: #221120, #221284)
-+ * New Maintainer (Closes: #206982)
-+
-+ -- Peter De Schrijver (p2) <p2@mind.be> Mon, 17 Nov 2003 23:03:58 +0100
-+
-+linux-atm (2.4.1-12) unstable; urgency=low
-+
-+ * don't build atm-tools-br2684 by default. Thanks to ftpmaster for
-+ not allowing the package to be in Debian.
-+ * Since we don't build atm-tools-br2684 any more, revert back to
-+ autotools output from 2.4.1-9
-+ * Add README.br2684 documenting a way to build the package locally.
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 5 Nov 2003 21:31:42 +0000
-+
-+linux-atm (2.4.1-11) experimental; urgency=low
-+
-+ * Build-Depend on dpatch
-+ * dpatch br2684 header files from later libc for old libc (woody)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 29 Oct 2003 19:05:07 +0000
-+
-+linux-atm (2.4.1-10) experimental; urgency=low
-+
-+ * add br2684 to package (closes: #216663)
-+ * autoreconf to actually build br2684
-+ * have libatm1-dev provide libatm-dev (closes: #216662)
-+ * move lib symlink to libatm1-dev as well (closes: #217259)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 23 Oct 2003 17:55:43 +0000
-+
-+linux-atm (2.4.1-9) unstable; urgency=low
-+
-+ * put libatm1-dev in libdevel (closes: #213170)
-+ * make sure that new descriptions actually make it into the package
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 9 Oct 2003 17:08:10 +0000
-+
-+linux-atm (2.4.1-8) unstable; urgency=low
-+
-+ * build arch-indep package as targets of binary-indep (closes: #212124)
-+ * use dh_installdocs to install files to libatm1-dev/docs
-+ * symlink shared lib to usr/bin (closes: #213146)
-+ * Use better long descriptions. Thanks to Javier (closes: #209427)
-+ Fernandez-Sanguino (closes: #209612)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Sun, 28 Sep 2003 19:29:08 +0000
-+
-+linux-atm (2.4.1-7) unstable; urgency=low
-+
-+ * libatm1 now conflicts with atm-tools (<< 2.4.1-6) (closes: #208170)
-+ * armarp now writes output to stdout.
-+ * add atm-dev as empty transitional package to help upgrades
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 2 Sep 2003 09:20:33 +0000
-+
-+linux-atm (2.4.1-6) unstable; urgency=low
-+
-+ * split off shared libraries to libatm1
-+ * rename atm-dev to libatm1-dev
-+ * Standards-Version: 3.6.1
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 26 Aug 2003 15:46:27 +0000
-+
-+linux-atm (2.4.1-5) unstable; urgency=low
-+
-+ * move *.a and *.la to usr/lib (closes: #199506).
-+ * let atm-dev depend on atm-tools to avoid dangling /lib/libatm.so
-+ symlink.
-+ * Standards-Version: 3.5.6
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 30 Jul 2003 11:46:19 +0000
-+
-+linux-atm (2.4.1-4) unstable; urgency=low
-+
-+ * add Build-Depends: on automake1.4
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 16:58:21 +0000
-+
-+linux-atm (2.4.1-3) unstable; urgency=low
-+
-+ * rebuilding libtool broke src/test/Makefile.in. Applied fix to
-+ Makefile.am and re-built again.
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 11:05:26 +0000
-+
-+linux-atm (2.4.1-2) unstable; urgency=low
-+
-+ * rebuild configure script with new libtool (closes: #196909)
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 10 Jun 2003 21:01:50 +0000
-+
-+linux-atm (2.4.1-1) unstable; urgency=low
-+
-+ * new upstream source
-+ * remove atmarp and atmarpd from /usr/sbin as they are already in
-+ /sbin (closes: #196216)
-+ * lintian fixes
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Mon, 9 Jun 2003 16:03:45 +0000
-+
-+linux-atm (2.4.0-5) unstable; urgency=low
-+
-+ * Fix for src/test/Makefile.in to allow building on hppa and ia64
-+ which the fix introduced to 2.4.0-4 broke. Thanks to Goswin
-+ Brederlow.
-+ * Move init.d priority to that atmarpd is started before network
-+ interfaces are started.
-+ * Move atmarpd and libatm to /sbin and /lib to allow atmarpd to be
-+ started before /usr is mounted.
-+ * use dh_install instead of dh_movefiles.
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Sat, 24 Aug 2002 15:13:48 +0000
-+
-+linux-atm (2.4.0-4) unstable; urgency=low
-+
-+ * new maintainer
-+ * Fix for src/test/Makefile.in to allow building on sparc.
-+ Thanks to Patrick Mauritz. (closes: #144225).
-+ * added pseudo-manpage for manpage-less binaries.
-+ * removed rpath by changing configure and make install paramaters
-+
-+ -- Marc Haber <mh+debian-packages@zugschlus.de> Fri, 16 Aug 2002 20:39:05 +0000
-+
-+linux-atm (2.4.0-3) unstable; urgency=HIGH
-+
-+ * Re-ran libtoolize.
-+ Closes: #143522
-+
-+ * Previous version Closes: #135328
-+
-+ -- Russell Coker <russell@coker.com.au> Fri, 19 Apr 2002 01:55:00 +0200
-+
-+linux-atm (2.4.0-2) unstable; urgency=HIGH
-+
-+ * Put a "grep -v EMAXERRNO" into the build process to deal with mipsel and
-+ the "#ifdef __KERNEL__" it has in it's /usr/include/asm/errno.h .
-+
-+ -- Russell Coker <russell@coker.com.au> Thu, 18 Apr 2002 19:56:00 +0200
-+
-+linux-atm (2.4.0-1) unstable; urgency=HIGH
-+
-+ * New upstream version which changes source package name.
-+ Closes: #138911
-+
-+ -- Russell Coker <russell@coker.com.au> Mon, 18 Mar 2002 17:42:00 +0100
-+
-+atm (0.79-4) unstable; urgency=low
-+
-+ * Added build-depends on flex.
-+ Closes: #111072
-+
-+ * Made the atm tools use a shared object to save space.
-+
-+ * Fixed the copyright file and put all copyright details in both packages.
-+
-+ * Added support for easy building with different kernel headers.
-+ Closes: #110249
-+
-+ -- Russell Coker <russell@coker.com.au> Sun, 7 Oct 2001 14:11:33 +0200
-+
-+atm (0.79-3) unstable; urgency=low
-+
-+ * Created /etc/init.d/atm to start and stop atmarpd.
-+ Closes: #110252
-+
-+ * Added build-depends on bison.
-+ Closes: #110576
-+
-+ -- Russell Coker <russell@coker.com.au> Fri, 31 Aug 2001 15:21:44 +0200
-+
-+atm (0.79-2) unstable; urgency=low
-+
-+ * Changed the main package name to atm-tools to indicate that it doesn't
-+ provide ATM (gotta have the kernel support), it just has the daemons and
-+ utilities.
-+
-+ -- Russell Coker <russell@coker.com.au> Sat, 25 Aug 2001 17:55:00 +0200
-+
-+atm (0.79-1) unstable; urgency=low
-+
-+ * Initial Release.
-+
-+ -- Russell Coker <russell@coker.com.au> Fri, 24 Aug 2001 17:31:00 +0200
---- linux-atm-2.4.1.orig/debian/checkout-br2684
-+++ linux-atm-2.4.1/debian/checkout-br2684
-@@ -0,0 +1,25 @@
-+#!/bin/bash -x
-+
-+set -e
-+
-+# check out br2684 from upstream CVS. We need to jump through hoops if
-+# the local source package is under cvs control as well.
-+
-+CVSDIR=":pserver:anonymous:@cvs.linux-atm.sourceforge.net.:/cvsroot/linux-atm"
-+DIR="br2684"
-+TMPDIR="/tmp"
-+TARGETDIR="src"
-+
-+cvs -d${CVSDIR} login
-+
-+mkdir -p $TMPDIR
-+pushd $TMPDIR
-+cvs -z6 -d${CVSDIR} export -d $DIR -r V2_5_0 linux-atm/src/br2684
-+
-+popd
-+
-+mv $TMPDIR/$DIR/* $TARGETDIR/$DIR
-+rm -rf $TMPDIR/$DIR
-+
-+autoreconf -i -f
-+
---- linux-atm-2.4.1.orig/debian/copyright.header
-+++ linux-atm-2.4.1/debian/copyright.header
-@@ -0,0 +1,18 @@
-+This package was debianized by Russell Coker <russell@coker.com.au> on
-+Fri, 24 Aug 2001 16:11:12 +0200 and is now maintained by Marc Haber
-+<mh+debian-packages@zugschlus.de>.
-+
-+It was downloaded from http://www.sourceforge.net/projects/linux-atm/
-+
-+See also http://linux-atm.sourceforge.net/dist.php
-+
-+Upstream Authors:
-+Werner Almesberger EPFL ICA <Werner.Almesberger@epfl.ch>
-+Mitchell Blank Jr. <mitch@sfgoth.com>
-+Paul B Schroeder <paulsch@us.ibm.com>
-+
-+Copyright:
-+
-+GPL 2.0
-+
-+See /usr/share/common-licenses/GPL-2
---- linux-atm-2.4.1.orig/debian/libatm1-dev.dirs
-+++ linux-atm-2.4.1/debian/libatm1-dev.dirs
-@@ -0,0 +1,2 @@
-+usr/lib
-+usr/include
---- linux-atm-2.4.1.orig/debian/libatm1-dev.docs
-+++ linux-atm-2.4.1/debian/libatm1-dev.docs
-@@ -0,0 +1,2 @@
-+doc/README.CLP
-+doc/atm-linux-howto.txt
---- linux-atm-2.4.1.orig/debian/libatm1-dev.install
-+++ linux-atm-2.4.1/debian/libatm1-dev.install
-@@ -0,0 +1,2 @@
-+debian/tmp/usr/include/*
-+debian/tmp/usr/lib/*.a usr/lib
---- linux-atm-2.4.1.orig/debian/libatm1-dev.links
-+++ linux-atm-2.4.1/debian/libatm1-dev.links
-@@ -0,0 +1 @@
-+lib/libatm.so.1 usr/lib/libatm.so
---- linux-atm-2.4.1.orig/debian/libatm1.dirs
-+++ linux-atm-2.4.1/debian/libatm1.dirs
-@@ -0,0 +1 @@
-+/lib
---- linux-atm-2.4.1.orig/debian/libatm1.install
-+++ linux-atm-2.4.1/debian/libatm1.install
-@@ -0,0 +1 @@
-+debian/tmp/usr/lib/libatm.so.* lib
+ int buflen = 8 * 1024; /* length of buffer */
+@@ -466,7 +467,7 @@ int no_check = 0;
+
+ {
+ struct sockaddr_atmsvc peer;
+- int peerlen = sizeof(peer);
++ socklen_t peerlen = sizeof(peer);
+ if (getpeername(fd, (struct sockaddr *) &peer,
+ &peerlen) < 0) {
+ err("getpeername");
+@@ -498,7 +499,7 @@ int no_check = 0;
+ /* set socket buffer size */
+ #if defined(SO_SNDBUF) || defined(SO_RCVBUF)
+ if (sockbufsize) {
+- int len;
++ socklen_t len;
+
+ if (trans) {
+ /* set send socket buffer if we are transmitting */
+--- a/src/mpoad/mpcd.8
++++ b/src/mpoad/mpcd.8
+@@ -28,7 +28,7 @@ mpcd \- ATM MPOA (Multi\-Protocol Over A
+ .B ]]
+ .SH DESCRIPTION
+ MPOA client
+-.SM(MPC) is responsible for creating and receiving
++.SM (MPC) is responsible for creating and receiving
+ internetwork layer shortcuts. Using these shortcuts MPCs forward
+ unicast internetwork layer packets effectively over ATM without need
+ for routing protocols.
+@@ -43,7 +43,7 @@ accepts shortcuts and packets arriving o
+ shortcuts is done with the help of
+ .SM MPOA
+ server
+-.SM(MPS).
++.SM (MPS).
+ .PP
+ Just as the Linux
+ .SM LAN
+--- a/src/led/zeppelin.8
++++ b/src/led/zeppelin.8
+@@ -99,7 +99,7 @@ Ring and ATM parts of the ELAN, so using
+ recommended. Token Ring support has received less testing than its
+ Ethernet counterpart.
+ .SH FILES
+-.IP \fI/var/run/lec[interface number].pid\fP
++.IP \fI/var/run/lec[interface\ number].pid\fP
+ The file containing the process id of zeppelin.
+ .SH BUGS
+ John Bonham died 1980 and Led Zeppelin broke.
+--- a/src/sigd/atmsigd.conf.4
++++ b/src/sigd/atmsigd.conf.4
+@@ -125,7 +125,7 @@ a comment. The `#' character cannot be e
+ .P
+ If an option is specified in \fBatmsigd.conf\fP and on the command
+ line, the command line has priority.
+-.COMPATIBILITY
++.SH COMPATIBILITY
+ Certain options used by past versions of \fBatmsigd\fP but no longer documented
+ on the man page are still recognized and supported, but they also yield a
+ warning message. Future versions of \fBatmsigd\fP will not recognize those
projects / openwrt.git / blobdiff