#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
override MAKE:=$(SUBMAKE)
KDIR=$(KERNEL_BUILD_DIR)
-ifneq ($(CONFIG_BIG_ENDIAN),y)
-JFFS2OPTS := --pad --little-endian --squash
-SQUASHFS_OPTS := -le
+IMG_PREFIX:=openwrt-$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))
+
+ifneq ($(CONFIG_BIG_ENDIAN),)
+ JFFS2OPTS := --pad --big-endian --squash -v
else
-JFFS2OPTS := --pad --big-endian --squash
-SQUASHFS_OPTS := -be
+ JFFS2OPTS := --pad --little-endian --squash -v
endif
-ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_25)$(CONFIG_LINUX_2_6_28),)
-USE_SQUASHFS3 := y
+ifeq ($(CONFIG_JFFS2_RTIME),y)
+ JFFS2OPTS += -X rtime
+endif
+ifeq ($(CONFIG_JFFS2_ZLIB),y)
+ JFFS2OPTS += -X zlib
+endif
+ifeq ($(CONFIG_JFFS2_LZMA),y)
+ JFFS2OPTS += -X lzma --compression-mode=size
+endif
+ifneq ($(CONFIG_JFFS2_RTIME),y)
+ JFFS2OPTS += -x rtime
+endif
+ifneq ($(CONFIG_JFFS2_ZLIB),y)
+ JFFS2OPTS += -x zlib
+endif
+ifneq ($(CONFIG_JFFS2_LZMA),y)
+ JFFS2OPTS += -x lzma
endif
-ifneq ($(USE_SQUASHFS3),)
-MKSQUASHFS_CMD := $(STAGING_DIR_HOST)/bin/mksquashfs-lzma
-else
-MKSQUASHFS_CMD := $(STAGING_DIR_HOST)/bin/mksquashfs4
-SQUASHFS_OPTS := -lzma -processors 1
+SQUASHFSCOMP := gzip
+LZMA_XZ_OPTIONS := -Xpreset 9 -Xe -Xlc 0 -Xlp 2 -Xpb 2
+ifeq ($(CONFIG_SQUASHFS_LZMA),y)
+ SQUASHFSCOMP := lzma $(LZMA_XZ_OPTIONS)
+endif
+ifeq ($(CONFIG_SQUASHFS_XZ),y)
+ SQUASHFSCOMP := xz $(LZMA_XZ_OPTIONS)
endif
JFFS2_BLOCKSIZE ?= 64k 128k
echo -ne '\xde\xad\xc0\xde' >> $(1)
endef
-# pad to 64k and add jffs2 end-of-filesystem mark
-# do this twice to make sure that this works with 128k blocksize as well
+# pad to 4k, 8k, 64k, 128k 256k and add jffs2 end-of-filesystem mark
define prepare_generic_squashfs
- dd if=$(1) of=$(KDIR)/tmpfile.1 bs=64k conv=sync
- $(call add_jffs2_mark,$(KDIR)/tmpfile.1)
- dd of=$(1) if=$(KDIR)/tmpfile.1 bs=64k conv=sync
- $(call add_jffs2_mark,$(1))
+ $(STAGING_DIR_HOST)/bin/padjffs2 $(1) 4 8 64 128 256
endef
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- ifeq ($(CONFIG_TARGET_ROOTFS_JFFS2),y)
+
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+
+ define Image/BuildKernel
+ cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(IMG_PREFIX)-vmlinux.elf
+ $(call Image/Build/Initramfs)
+ endef
+
+else
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_JFFS2),)
define Image/mkfs/jffs2/sub
# FIXME: removing this line will cause strange behaviour in the foreach loop below
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 $(JFFS2OPTS) -e $(patsubst %k,%KiB,$(1)) -o $(KDIR)/root.jffs2-$(1) -d $(TARGET_DIR)
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 $(JFFS2OPTS) -e $(patsubst %k,%KiB,$(1)) -o $(KDIR)/root.jffs2-$(1) -d $(TARGET_DIR) -v 2>&1 1>/dev/null | awk '/^.+$$$$/'
$(call add_jffs2_mark,$(KDIR)/root.jffs2-$(1))
$(call Image/Build,jffs2-$(1))
endef
define Image/mkfs/jffs2
- rm -rf $(TARGET_DIR)/jffs
$(foreach SZ,$(JFFS2_BLOCKSIZE),$(call Image/mkfs/jffs2/sub,$(SZ)))
endef
endif
- ifeq ($(CONFIG_TARGET_ROOTFS_SQUASHFS),y)
+ ifneq ($(CONFIG_TARGET_ROOTFS_SQUASHFS),)
define Image/mkfs/squashfs
- @mkdir -p $(TARGET_DIR)/jffs
- $(MKSQUASHFS_CMD) $(TARGET_DIR) $(KDIR)/root.squashfs -nopad -noappend -root-owned $(SQUASHFS_OPTS)
+ @mkdir -p $(TARGET_DIR)/overlay
+ $(STAGING_DIR_HOST)/bin/mksquashfs4 $(TARGET_DIR) $(KDIR)/root.squashfs -nopad -noappend -root-owned -comp $(SQUASHFSCOMP) -processors $(if $(CONFIG_PKG_BUILD_JOBS),$(CONFIG_PKG_BUILD_JOBS),1)
$(call Image/Build,squashfs)
endef
endif
- ifeq ($(CONFIG_TARGET_ROOTFS_TGZ),y)
- define Image/mkfs/tgz
- $(TAR) -zcf $(BIN_DIR)/openwrt-$(BOARD)-rootfs.tgz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+ ifneq ($(CONFIG_TARGET_ROOTFS_UBIFS),)
+ define Image/mkfs/ubifs
+ $(CP) ./ubinize.cfg $(KDIR)
+ $(STAGING_DIR_HOST)/bin/mkfs.ubifs $(UBIFS_OPTS) -o $(KDIR)/root.ubifs -d $(TARGET_DIR)
+ (cd $(KDIR); \
+ $(STAGING_DIR_HOST)/bin/ubinize $(UBINIZE_OPTS) -o $(KDIR)/root.ubi ubinize.cfg)
+ $(call Image/Build,ubi)
endef
endif
- ifeq ($(CONFIG_TARGET_ROOTFS_CPIOGZ),y)
- define Image/mkfs/cpiogz
- ( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9 >$(BIN_DIR)/openwrt-$(BOARD)-rootfs.cpio.gz )
- endef
- endif
-else
- define Image/BuildKernel
- cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.elf
- $(call Image/Build/Initramfs)
- endef
endif
-define Image/Checksum
- ( cd ${BIN_DIR} ; \
- $(FIND) -maxdepth 1 -type f \! -name 'md5sums' -printf "%P\n" | xargs \
- md5sum --binary > md5sums \
- )
-endef
-
+ifneq ($(CONFIG_TARGET_ROOTFS_CPIOGZ),)
+ define Image/mkfs/cpiogz
+ ( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9 >$(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz )
+ endef
+endif
-ifeq ($(CONFIG_TARGET_ROOTFS_EXT2FS),y)
- E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_FSPART)*1024)))
+ifneq ($(CONFIG_TARGET_ROOTFS_TARGZ),)
+ define Image/mkfs/targz
+ # Preserve permissions (-p) when building as non-root user
+ $(TAR) -czpf $(BIN_DIR)/$(IMG_PREFIX)-rootfs.tar.gz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+ endef
+endif
- define Image/mkfs/ext2
- $(STAGING_DIR_HOST)/bin/genext2fs -U -b $(E2SIZE) -N $(CONFIG_TARGET_ROOTFS_MAXINODE) -d $(TARGET_DIR)/ $(KDIR)/root.ext2
- $(call Image/Build,ext2)
+ifneq ($(CONFIG_TARGET_ROOTFS_EXT4FS),)
+ E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024)))
+
+ define Image/mkfs/ext4
+# generate an ext2 fs
+ $(STAGING_DIR_HOST)/bin/genext2fs -U -b $(E2SIZE) -N $(CONFIG_TARGET_ROOTFS_MAXINODE) -d $(TARGET_DIR)/ $(KDIR)/root.ext4
+# convert it to ext4
+ $(STAGING_DIR_HOST)/bin/tune2fs -O extents,uninit_bg,dir_index $(KDIR)/root.ext4
+# fix it up
+ $(STAGING_DIR_HOST)/bin/e2fsck -fy $(KDIR)/root.ext4
+ $(call Image/Build,ext4)
endef
endif
-ifeq ($(CONFIG_TARGET_ROOTFS_ISO),y)
+ifneq ($(CONFIG_TARGET_ROOTFS_ISO),)
define Image/mkfs/iso
$(call Image/Build,iso)
endef
define Image/mkfs/prepare/default
- - find $(TARGET_DIR) -type f -not -perm +0100 -not -name 'ssh_host*' | $(XARGS) chmod 0644
- - find $(TARGET_DIR) -type f -perm +0100 | $(XARGS) chmod 0755
- - find $(TARGET_DIR) -type d | $(XARGS) chmod 0755
+ # Use symbolic permissions to avoid clobbering SUID/SGID/sticky bits
+ - $(FIND) $(TARGET_DIR) -type f -not -perm +0100 -not -name 'ssh_host*' -print0 | $(XARGS) -0 chmod u+rw,g+r,o+r
+ - $(FIND) $(TARGET_DIR) -type f -perm +0100 -print0 | $(XARGS) -0 chmod u+rwx,g+rx,o+rx
+ - $(FIND) $(TARGET_DIR) -type d -print0 | $(XARGS) -0 chmod u+rwx,g+rx,o+rx
$(INSTALL_DIR) $(TARGET_DIR)/tmp
chmod 0777 $(TARGET_DIR)/tmp
endef
$(call Image/mkfs/prepare/default)
endef
+
+define Image/Checksum
+ ( cd ${BIN_DIR} ; \
+ $(FIND) -maxdepth 1 -type f \! -name 'md5sums' -printf "%P\n" | sort | xargs \
+ md5sum --binary > md5sums \
+ )
+endef
+
+
define BuildImage
-download:
-prepare:
-ifneq ($(IB),1)
- compile: compile-targets FORCE
- $(call Build/Compile)
-else
- compile:
-endif
-ifneq ($(IB),1)
- install: compile install-targets FORCE
- $(call Image/Prepare)
- $(call Image/mkfs/prepare)
- $(call Image/BuildKernel)
- $(call Image/mkfs/jffs2)
- $(call Image/mkfs/squashfs)
- $(call Image/mkfs/tgz)
- $(call Image/mkfs/cpiogz)
- $(call Image/mkfs/ext2)
- $(call Image/mkfs/iso)
- $(call Image/Checksum)
-else
- install: compile install-targets
- $(call Image/BuildKernel)
- $(call Image/mkfs/jffs2)
- $(call Image/mkfs/squashfs)
- $(call Image/mkfs/tgz)
- $(call Image/mkfs/cpiogz)
- $(call Image/mkfs/ext2)
- $(call Image/mkfs/iso)
- $(call Image/Checksum)
-endif
+ download:
+ prepare:
-ifneq ($(IB),1)
- clean: clean-targets
- $(call Build/Clean)
-else
- clean:
-endif
+ ifeq ($(IB),)
+ compile: compile-targets FORCE
+ $(call Build/Compile)
+ else
+ compile:
+ endif
-compile-targets:
-install-targets:
-clean-targets:
-endef
+ ifeq ($(IB),)
+ install: compile install-targets FORCE
+ $(call Image/Prepare)
+ $(call Image/mkfs/prepare)
+ $(call Image/BuildKernel)
+ $(call Image/mkfs/cpiogz)
+ $(call Image/mkfs/targz)
+ $(call Image/mkfs/ext4)
+ $(call Image/mkfs/iso)
+ $(call Image/mkfs/jffs2)
+ $(call Image/mkfs/squashfs)
+ $(call Image/mkfs/ubifs)
+ $(call Image/Checksum)
+ else
+ install: compile install-targets
+ $(call Image/BuildKernel)
+ $(call Image/mkfs/cpiogz)
+ $(call Image/mkfs/targz)
+ $(call Image/mkfs/ext4)
+ $(call Image/mkfs/iso)
+ $(call Image/mkfs/jffs2)
+ $(call Image/mkfs/squashfs)
+ $(call Image/mkfs/ubifs)
+ $(call Image/Checksum)
+ endif
+ ifeq ($(IB),)
+ clean: clean-targets
+ $(call Build/Clean)
+ else
+ clean:
+ endif
+
+ compile-targets:
+ install-targets:
+ clean-targets:
+endef
projects / openwrt.git / blobdiff