[ar71xx] make all AR913x GPIO lines usable

[openwrt.git] / target / linux / ar71xx / files / drivers / net / ag71xx / ag71xx.h

diff --git a/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h b/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h
index 06ec3c3..ab9887f 100644 (file)
--- a/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h
+++ b/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h
@@ -37,7 +37,7 @@
 #define ETH_FCS_LEN    4
 
 #define AG71XX_DRV_NAME                "ag71xx"
-#define AG71XX_DRV_VERSION     "0.5.0"
+#define AG71XX_DRV_VERSION     "0.5.5"
 
 #define AG71XX_NAPI_TX         1
 
@@ -198,12 +198,14 @@ static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
 #define AG71XX_REG_INT_ENABLE  0x0198
 #define AG71XX_REG_INT_STATUS  0x019c
 
-#define MAC_CFG1_TXE           BIT(0)
-#define MAC_CFG1_STX           BIT(1)
-#define MAC_CFG1_RXE           BIT(2)
-#define MAC_CFG1_SRX           BIT(3)
-#define MAC_CFG1_LB            BIT(8)
-#define MAC_CFG1_SR            BIT(31)
+#define MAC_CFG1_TXE           BIT(0)  /* Tx Enable */
+#define MAC_CFG1_STX           BIT(1)  /* Synchronize Tx Enable */
+#define MAC_CFG1_RXE           BIT(2)  /* Rx Enable */
+#define MAC_CFG1_SRX           BIT(3)  /* Synchronize Rx Enable */
+#define MAC_CFG1_TFC           BIT(4)  /* Tx Flow Control Enable */
+#define MAC_CFG1_RFC           BIT(5)  /* Rx Flow Control Enable */
+#define MAC_CFG1_LB            BIT(8)  /* Loopback mode */
+#define MAC_CFG1_SR            BIT(31) /* Soft Reset */
 
 #define MAC_CFG2_FDX           BIT(0)
 #define MAC_CFG2_CRC_EN                BIT(1)
@@ -285,17 +287,17 @@ static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
 #define MII_IND_BUSY           BIT(0)
 #define MII_IND_INVALID                BIT(2)
 
-#define TX_CTRL_TXE            BIT(0)
+#define TX_CTRL_TXE            BIT(0)  /* Tx Enable */
 
-#define TX_STATUS_PS           BIT(0)
-#define TX_STATUS_UR           BIT(1)
-#define TX_STATUS_BE           BIT(3)
+#define TX_STATUS_PS           BIT(0)  /* Packet Sent */
+#define TX_STATUS_UR           BIT(1)  /* Tx Underrun */
+#define TX_STATUS_BE           BIT(3)  /* Bus Error */
 
-#define RX_CTRL_RXE            BIT(0)
+#define RX_CTRL_RXE            BIT(0)  /* Rx Enable */
 
-#define RX_STATUS_PR           BIT(0)
-#define RX_STATUS_OF           BIT(1)
-#define RX_STATUS_BE           BIT(3)
+#define RX_STATUS_PR           BIT(0)  /* Packet Received */
+#define RX_STATUS_OF           BIT(2)  /* Rx Overflow */
+#define RX_STATUS_BE           BIT(3)  /* Bus Error */
 
 #define MII_CTRL_IF_MASK       3
 #define MII_CTRL_SPEED_SHIFT   4