remove GPG not enabled in this build warning

[openwrt.git] / target / linux / ixp4xx / patches-2.6.26 / 110-pronghorn_series_support.patch

diff --git a/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch
index a35663a..45589a8 100644 (file)
--- a/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch
@@ -11,7 +11,7 @@
  CONFIG_MACH_IXDP465=y
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,24 @@
+@@ -65,6 +65,22 @@
          WG302 v2 or WAG302 v2 Access Points. For more information
          on this platform, see http://openwrt.org
  
@@ -29,9 +29,7 @@
 +# CF slot connected to the expansion bus, so we just enable them together.
 +#
 +config MACH_PRONGHORNMETRO
-+      bool 
-+      depends on MACH_PRONGHORN
-+      default y
++      def_bool MACH_PRONGHORN
 +
  config ARCH_IXDP425
        bool "IXDP425"
@@ -153,6 +151,7 @@
 +#include <linux/types.h>
 +#include <linux/memory.h>
 +#include <linux/i2c-gpio.h>
++#include <linux/leds.h>
 +
 +#include <asm/setup.h>
 +#include <asm/hardware.h>
@@ -242,12 +241,11 @@
 +      {
 +              .name           = "pronghorn:green:status",
 +              .gpio           = 7,
-+      },
-+      { },
++      }
 +};
 +
 +static struct gpio_led_platform_data pronghorn_led_data = {
-+      .num_leds               = ARRAY_SIZE(pronghorn_led_pin),
++      .num_leds               = 1,
 +      .leds                   = pronghorn_led_pin,
 +};
 +
@@ -322,7 +320,7 @@
 +      ixp4xx_sys_init();
 +
 +      pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+      pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++      pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +      *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +      *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
@@ -330,15 +328,6 @@
 +      platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
 +
 +      if (machine_is_pronghorn()) {
-+              pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
-+              pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
-+
-+              pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
-+              pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
-+
-+              pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+              pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
-+      } else {
 +              pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
 +              pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
 +
@@ -347,6 +336,15 @@
 +
 +              pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
 +              pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
++      } else {
++              pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
++              pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
++
++              pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
++              pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
++
++              pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
++              pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
 +
 +              platform_device_register(&pronghorn_i2c_gpio);
 +      }