hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+suppl...

[openwrt.git] / target / linux / ar71xx / patches-2.6.32 / 204-rtl8366-smi-driver.patch

diff --git a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
index 383513c..fbd52c3 100644 (file)
--- a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
@@ -1,27 +1,39 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -146,4 +146,14 @@ config MDIO_GPIO
+@@ -146,4 +146,25 @@ config MDIO_GPIO
          To compile this driver as a module, choose M here: the module
          will be called mdio-gpio.
  
 +config RTL8366_SMI
-+      tristate "Support for RTL8366 switch via SMI interface"
++      tristate "Driver for the RTL8366 SMI interface"
 +      depends on GENERIC_GPIO
++      ---help---
++        This module implements the SMI interface protocol which is used
++        by some RTL8366 ethernet switch devices via the generic GPIO API.
 +
-+config RTL8366_SMI_DEBUG_FS
-+      bool "RTL8366S driver DEBUG_FS support"
-+      depends on RTL8366_SMI
++if RTL8366_SMI
++
++config RTL8366S_PHY
++      tristate "Driver for the Realtek RTL8366S switch"
++      select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++      bool "RTL8366S switch driver DEBUG_FS support"
++      depends on RTL8366S_PHY
 +      depends on DEBUG_FS
 +      default n
++
++endif # RTL8366_SMI
 +
  endif # PHYLIB
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_IP175C_PHY)     += ip175c.o
+@@ -20,6 +20,8 @@ obj-$(CONFIG_IP175C_PHY)     += ip175c.o
  obj-$(CONFIG_REALTEK_PHY)     += realtek.o
  obj-$(CONFIG_AR8216_PHY)      += ar8216.o
  obj-$(CONFIG_RTL8306_PHY)     += rtl8306.o
 +obj-$(CONFIG_RTL8366_SMI)     += rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)    += rtl8366s.o
  obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
  obj-$(CONFIG_MICREL)          += micrel.o
  obj-$(CONFIG_FIXED_PHY)               += fixed.o