[rdc] add support for 2.6.28 and use it as the default kernel version, tested on...

[openwrt.git] / target / linux / ixp4xx / patches-2.6.26 / 180-tw5334_support.patch

diff --git a/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch
index 4072420..46198ac 100644 (file)
--- a/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -158,6 +158,14 @@
+@@ -158,6 +158,14 @@ config ARCH_PRPMC1100
          PrPCM1100 Processor Mezanine Module. For more information on
          this platform, see <file:Documentation/arm/IXP4xx>.
  
@@ -17,17 +17,17 @@
        prompt "NAS100D"
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@
+@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)    += sid
+ obj-pci-$(CONFIG_MACH_COMPEX)         += ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_WRT300NV2)              += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER)             += sidewinder-pci.o
  obj-pci-$(CONFIG_MACH_AP1000)         += ixdp425-pci.o
 +obj-pci-$(CONFIG_MACH_TW5334)         += tw5334-pci.o
  
  obj-y += common.o
  
-@@ -42,6 +43,7 @@
+@@ -42,6 +43,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)        += sidewin
+ obj-$(CONFIG_MACH_COMPEX)     += compex-setup.o
  obj-$(CONFIG_MACH_WRT300NV2)  += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
  obj-$(CONFIG_MACH_AP1000)     += ap1000-setup.o
 +obj-$(CONFIG_MACH_TW5334)     += tw5334-setup.o
  
@@ -272,7 +272,7 @@
 +subsys_initcall(tw5334_pci_init);
 --- a/include/asm-arm/arch-ixp4xx/uncompress.h
 +++ b/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,8 @@
+@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
         */
        if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
                         machine_is_gateway7001() || machine_is_wg302v2() ||