+ A driver for 802.11b wireless cards based based on the "Hermes" or
+ Intersil HFA384x (Prism 2) MAC controller. This includes the vast
+ majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+ - except for the Cisco/Aironet cards. Cards supported include the
+ Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+ Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+ IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+ MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+ PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+ This package contains the hermes.o and orinoco.o kernel modules.
+
+
+config BR2_PACKAGE_KMOD_NET_HERMES_PCI
+ tristate "kmod-net-hermes-pci.......... Intersil Prism 2.5 PCI 802.11b adaptor support"
+ default m
+ depends BR2_PACKAGE_KMOD_NET_HERMES
+ help
+ Enable support for PCI and mini-PCI 802.11b wireless NICs based on
+ the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
+ PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
+ common. Some of the built-in wireless adaptors in laptops are of
+ this variety.
+
+ This package contains the orinoco_pci.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_HERMES_PLX
+ tristate "kmod-net-hermes-plx.......... Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
+ default m
+ depends BR2_PACKAGE_KMOD_NET_HERMES
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco_cs) driver when used in PLX9052 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines. The Netgear
+ MA301 is such an adaptor.
+
+ This package contains the orinoco_plx.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_NATSEMI
+ tristate "kmod-net-natsemi............... National Semiconductor DP8381x series PCI Ethernet kernel support"
+ default m
+ help
+ This driver is for the National Semiconductor DP83810 series,
+ which is used in cards from PureData, NetGear, Linksys
+ and others, including the 83815 chip.
+
+ This package contains the natsemi.o kernel module.
+
+
+config BR2_PACKAGE_KMOD_NET_PRISM54
+ tristate "kmod-net-prism54............... Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
+ default m
+ help
+ Enable PCI and Cardbus support for the following chipset based cards:
+
+ * ISL3880 - Prism GT 802.11 b/g
+ * ISL3877 - Prism Indigo 802.11 a
+ * ISL3890 - Prism Duette 802.11 a/b/g
+
+ For a complete list of supported cards visit <http://prism54.org>.
+ Here is the latest confirmed list of supported cards:
+
+ * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ * Allnet ALL0271 PCI Card
+ * Compex WL54G Cardbus Card
+ * Corega CG-WLCB54GT Cardbus Card
+ * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+ * I-O Data WN-G54/CB Cardbus Card
+ * Kobishi XG-300 aka Z-Com Cardbus Card
+ * Netgear WG511 Cardbus Card
+ * Ovislink WL-5400PCI PCI Card
+ * Peabird WLG-PCI PCI Card
+ * Sitecom WL-100i Cardbus Card
+ * Sitecom WL-110i PCI Card
+ * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+ * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ * Z-Com XG-900 PCI Card
+ * Zyxel G-100 Cardbus Card
+
+ If you enable this, you require a firmware file as well.
+ You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+ You can get this non-GPL'd firmware file from the Prism54 project page:
+ <http://prism54.org>.
+
+ Note: You need a motherboard with DMA support to use any of these cards.
+
+ This package contains the prism54.o kernel module.
+
+
+comment "PCMCIA/CardBus support --------"
+
+config BR2_PACKAGE_KMOD_PCMCIA_CORE
+ tristate "kmod-pcmcia-core............... PCMCIA/CardBus support"
+ default m
+
+comment "USB support -------------------"
+
+config BR2_PACKAGE_KMOD_USB
+ tristate "kmod-usb-core.................. USB support"
+ default m
+
+config BR2_PACKAGE_KMOD_USB_UHCI
+ tristate "kmod-usb-uhci................ Support for UHCI controllers"
+ default m
+ depends BR2_PACKAGE_KMOD_USB
+ select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_OHCI
+ tristate "kmod-usb-ohci................ Support for OHCI controllers"
+ default m
+ depends BR2_PACKAGE_KMOD_USB
+ select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB2
+ tristate "kmod-usb2.................... Support for USB 2.0 controllers"
+ default m
+ depends BR2_PACKAGE_KMOD_USB
+ select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_CONTROLLER
+ tristate
+ depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI || BR2_PACKAGE_KMOD_USB2
+ default n
+
+config BR2_PACKAGE_KMOD_USB_ACM
+ tristate "kmod-usb-acm................... Support for USB modems/isdn controllers"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_AUDIO
+ tristate "kmod-usb-audio................. Support for USB soundcards"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+ select BR2_PACKAGE_KMOD_SOUNDCORE
+
+config BR2_PACKAGE_KMOD_USB_PRINTER
+ tristate "kmod-usb-printer............... Support for USB printers"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_SERIAL
+ tristate "kmod-usb-serial................ Support for USB-to-serial converters"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_BELKIN
+ tristate "kmod-usb-serial-belkin....... Support for Belkin USB-to-serial converters"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_FTDI
+ tristate "kmod-usb-serial-ftdi......... Support for FTDI USB-to-serial converterr"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_MCT_U232
+ tristate "kmod-usb-serial-mct-u232..... Support for Magic Control Technology USB-to-Serial converters"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_PL2303
+ tristate "kmod-usb-serial-pl2303....... Support for Prolific PL2303 USB-to-Serial converters"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_STORAGE
+ tristate "kmod-usb-storage............... Support for USB storage devices"
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+comment "Misc. device support ----------"
+
+config BR2_PACKAGE_KMOD_AX25
+ tristate "kmod-ax25...................... AX25 support"
+ default m
+ help
+ Kernel modules for AX25 protocol family
+ - ax25.o: AX25 layer 2 support
+ - mkiss.o: AX25 KISS driver
+
+
+config BR2_PACKAGE_KMOD_BLUETOOTH
+ tristate "kmod-bluetooth................. Bluetooth drivers and network stack"
+ default m
+ help
+ Bluetooth drivers and network stack
+
+
+config BR2_PACKAGE_KMOD_LP
+ tristate "kmod-lp........................ Parallel port and lp support"
+ default m
+ help
+ Kernel modules for line printer and parallel port support
+
+
+config BR2_PACKAGE_KMOD_WD1100
+ tristate "kmod-wd1100.................... Soekris net4801 watchdog"
+ default y
+ depends BR2_LINUX_2_4_X86
+ help
+ Driver for the NatSemi SC1x00 series Watchdog
+ found on Soekris net4801 boards
+
+
+comment "Additional kernel modules -----"
projects / openwrt.git / blobdiff