--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
-@@ -1471,13 +1471,6 @@ static void handle_assoc_cb(struct hosta
+@@ -1488,13 +1488,6 @@ static void handle_assoc_cb(struct hosta
int new_assoc = 1;
struct ieee80211_ht_capabilities ht_cap;
if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_resp) :
sizeof(mgmt->u.assoc_resp))) {
printf("handle_assoc_cb(reassoc=%d) - too short payload "
-@@ -1485,11 +1478,6 @@ static void handle_assoc_cb(struct hosta
+@@ -1502,11 +1495,6 @@ static void handle_assoc_cb(struct hosta
return;
}
sta = ap_get_sta(hapd, mgmt->da);
if (!sta) {
printf("handle_assoc_cb: STA " MACSTR " not found\n",
-@@ -1497,6 +1485,19 @@ static void handle_assoc_cb(struct hosta
+@@ -1514,6 +1502,19 @@ static void handle_assoc_cb(struct hosta
return;
}
if (status != WLAN_STATUS_SUCCESS)
goto fail;
+@@ -1812,6 +1813,9 @@ void ieee802_11_rx_from_unknown(struct h
+
+ sta = ap_get_sta(hapd, src);
+ if (sta && (sta->flags & WLAN_STA_ASSOC)) {
++ if (!hapd->conf->wds_sta)
++ return;
++
+ if (wds && !(sta->flags & WLAN_STA_WDS)) {
+ wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for "
+ "STA " MACSTR " (aid %u)",
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -181,6 +181,7 @@ struct i802_bss {
- struct wpa_driver_nl80211_data *drv;
- struct i802_bss *next;
- int ifindex;
-+ u8 addr[ETH_ALEN];
- char ifname[IFNAMSIZ + 1];
- char brname[IFNAMSIZ];
- unsigned int beacon_set:1;
-@@ -191,7 +192,6 @@ struct i802_bss {
- struct wpa_driver_nl80211_data {
- struct nl80211_global *global;
- struct dl_list list;
-- u8 addr[ETH_ALEN];
- char phyname[32];
- void *ctx;
- int ifindex;
-@@ -2482,7 +2482,7 @@ wpa_driver_nl80211_finish_drv_init(struc
- return -1;
+@@ -2588,10 +2588,10 @@ static int wpa_driver_nl80211_capa(struc
+ drv->data_tx_status = info.data_tx_status;
- if (linux_get_ifhwaddr(drv->global->ioctl_sock, bss->ifname,
-- drv->addr))
-+ bss->addr))
- return -1;
+ /*
+- * If poll command is supported mac80211 is new enough to
+- * have everything we need to not need monitor interfaces.
++ * If poll command and tx status are supported, mac80211 is new enough
++ * to have everything we need to not need monitor interfaces.
+ */
+- drv->use_monitor = !info.poll_command_supported;
++ drv->use_monitor = !info.poll_command_supported || !info.data_tx_status;
- if (nl80211_register_action_frames(drv) < 0) {
-@@ -5176,8 +5176,8 @@ static int wpa_driver_nl80211_hapd_send_
+ if (drv->device_ap_sme && drv->use_monitor) {
+ /*
+@@ -6267,8 +6267,8 @@ static int wpa_driver_nl80211_hapd_send_
pos = (u8 *) (hdr + 1);
if (qos) {
pos[1] = 0;
pos += 2;
}
-@@ -6407,7 +6407,7 @@ static int i802_set_wds_sta(void *priv,
- if (!if_nametoindex(name)) {
- if (nl80211_create_iface(drv, name,
- NL80211_IFTYPE_AP_VLAN,
-- NULL, 1) < 0)
-+ bss->addr, 1) < 0)
- return -1;
- if (bridge_ifname &&
- linux_br_add_if(drv->global->ioctl_sock,
-@@ -6417,6 +6417,10 @@ static int i802_set_wds_sta(void *priv,
+@@ -7533,6 +7533,10 @@ static int i802_set_wds_sta(void *priv,
linux_set_iface_flags(drv->global->ioctl_sock, name, 1);
return i802_set_sta_vlan(priv, addr, name, 0);
} else {
i802_set_sta_vlan(priv, addr, bss->ifname, 0);
return wpa_driver_nl80211_if_remove(priv, WPA_IF_AP_VLAN,
name);
-@@ -6625,7 +6629,7 @@ static int nl80211_addr_in_use(struct nl
- struct wpa_driver_nl80211_data *drv;
- dl_list_for_each(drv, &global->interfaces,
- struct wpa_driver_nl80211_data, list) {
-- if (os_memcmp(addr, drv->addr, ETH_ALEN) == 0)
-+ if (os_memcmp(addr, drv->first_bss.addr, ETH_ALEN) == 0)
- return 1;
- }
- return 0;
-@@ -6640,9 +6644,9 @@ static int nl80211_p2p_interface_addr(st
- if (!drv->global)
- return -1;
-
-- os_memcpy(new_addr, drv->addr, ETH_ALEN);
-+ os_memcpy(new_addr, drv->first_bss.addr, ETH_ALEN);
- for (idx = 0; idx < 64; idx++) {
-- new_addr[0] = drv->addr[0] | 0x02;
-+ new_addr[0] = drv->first_bss.addr[0] | 0x02;
- new_addr[0] ^= idx << 2;
- if (!nl80211_addr_in_use(drv->global, new_addr))
- break;
-@@ -6745,6 +6749,7 @@ static int wpa_driver_nl80211_if_add(voi
- os_free(new_bss);
- return -1;
- }
-+ memcpy(new_bss->addr, addr ? addr : if_addr, ETH_ALEN);
- os_strlcpy(new_bss->ifname, ifname, IFNAMSIZ);
- new_bss->ifindex = ifidx;
- new_bss->drv = drv;
-@@ -6775,7 +6780,12 @@ static int wpa_driver_nl80211_if_remove(
+@@ -7900,7 +7904,12 @@ static int wpa_driver_nl80211_if_remove(
if (ifindex <= 0)
return -1;
if (bss->added_if_into_bridge) {
if (linux_br_del_if(drv->global->ioctl_sock, bss->brname,
bss->ifname) < 0)
-@@ -6789,13 +6799,6 @@ static int wpa_driver_nl80211_if_remove(
+@@ -7914,13 +7923,6 @@ static int wpa_driver_nl80211_if_remove(
"bridge %s: %s",
bss->brname, strerror(errno));
}
if (bss != &drv->first_bss) {
struct i802_bss *tbss;
---- a/src/ap/wpa_auth.c
-+++ b/src/ap/wpa_auth.c
-@@ -776,7 +776,14 @@ void wpa_receive(struct wpa_authenticato
- }
-
- if (sm->wpa == WPA_VERSION_WPA2) {
-- if (key->type != EAPOL_KEY_TYPE_RSN) {
-+ if (key->type == EAPOL_KEY_TYPE_WPA) {
-+ /*
-+ * Some deployed station implementations seem to send
-+ * msg 4/4 with incorrect type value in WPA2 mode.
-+ */
-+ wpa_printf(MSG_DEBUG, "Workaround: Allow EAPOL-Key "
-+ "with unexpected WPA type in RSN mode");
-+ } else if (key->type != EAPOL_KEY_TYPE_RSN) {
- wpa_printf(MSG_DEBUG, "Ignore EAPOL-Key with "
- "unexpected type %d in RSN mode",
- key->type);
projects / openwrt.git / blobdiff