merge the control file and the .ipk file targets into one to prevent them from going...

[openwrt.git] / package / broadcom-diag / src / diag.c

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 96894da..ca08e46 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -54,11 +54,13 @@ module_param(gpiomask, int, 0644);
 enum {
        /* Linksys */
        WAP54GV1,
+       WAP54GV2,
        WAP54GV3,
        WRT54GV1,
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
+       WRT160N,
        WRT350N,
        WRT600N,
        WRT600NV11,
@@ -122,6 +124,7 @@ enum {
 
        /* D-Link */
        DIR130,
+       DIR320,
        DIR330,
        DWL3150,
 
@@ -166,6 +169,16 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "wlan",       .gpio = 1 << 4 },
                },
        },
+       [WAP54GV2] = {
+               .name           = "Linksys WAP54G V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 5, .polarity = REVERSE },
+                       /* GPIO 6 is b44 (eth0, LAN) PHY power */
+               },
+       },
        [WAP54GV3] = {
                .name           = "Linksys WAP54G V3",
                .buttons        = {
@@ -229,6 +242,18 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
+       [WRT160N] = {
+               .name           = "Linksys WRT160N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "ses_blue",   .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
@@ -707,6 +732,20 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
+       [DIR320] = {
+               .name     = "D-Link DIR-320",
+               .buttons        = {
+                       { .name = "reserved",   .gpio = 1 << 6},
+                       { .name = "reset",      .gpio = 1 << 7},
+               },
+               .leds      = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
+                       { .name = "red",        .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "blue",       .gpio = 1 << 4, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 5, .polarity = NORMAL },
+               },
+       },
        [DIR330] = {
                .name     = "D-Link DIR-330",
                .buttons        = {
@@ -781,6 +820,8 @@ static struct platform_t __init *platform_detect(void)
        if ((buf = nvram_get("ModelId"))) {
                if (!strcmp(buf, "WR850GP"))
                        return &platforms[WR850GP];
+               if (!strcmp(buf, "WR850G"))
+                       return &platforms[WR850GV2V3];
                if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap"))
                        return &platforms[TM2300]; /* Dell TrueMobile 2300 */
                if (startswith(buf,"WE800G")) /* WE800G* */
@@ -834,9 +875,14 @@ static struct platform_t __init *platform_detect(void)
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
                                return &platforms[WRTSL54GS];
 
+                       if (!strcmp(boardtype, "0x0472"))
+                               return &platforms[WRT160N];
+
                        /* default to WRT54G */
                        return &platforms[WRT54G];
                }
+               if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+                       return &platforms[WAP54GV2];
 
                if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
                        if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
@@ -860,6 +906,10 @@ static struct platform_t __init *platform_detect(void)
                if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
                        return &platforms[SE505V2];
 
+               if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
+                               !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
+                       return &platforms[DIR320];
+
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {