generic: ar8216: add setup_port field to ar8xxx_chip

[openwrt.git] / target / linux / adm5120 / router_le / base-files / sbin / wget2nand

diff --git a/target/linux/adm5120/router_le/base-files/sbin/wget2nand b/target/linux/adm5120/router_le/base-files/sbin/wget2nand
index adb56b9..5263bff 100755 (executable)
--- a/target/linux/adm5120/router_le/base-files/sbin/wget2nand
+++ b/target/linux/adm5120/router_le/base-files/sbin/wget2nand
@@ -8,57 +8,71 @@
 # Based on cf2nand from RB532 support
 . /etc/functions.sh
 
-[ -d /tmp/wget2nand ] && {
-       echo "/tmp/wget2nand already exists"
+[ -d /tmp/wget2nand-rootfs ] && {
+       echo "/tmp/wget2nand-rootfs already exists"
        exit 1
 }
 
-# first get an address for br-lan using udhcpc
-killall udhcpc
-/sbin/udhcpc -i br-lan
+[ -d /tmp/wget2nand-kernel ] && {
+       echo "/tmp/wget2nand-kernel already exists"
+       exit 1
+}
 
 # need to find the wget server from the command line
 url=$1
 [ -z "$url" ] && {
-       echo "No URL specified for image TGZ"
-       echo "Usage : $0 URL"
-       exit 1
-} 
+        echo "No URL specified for image TGZ"
+        echo "Usage : $0 URL"
+        exit 1
+}
 
-boot="$(find_mtd_part 'RouterBoard NAND Boot')"
-main="$(find_mtd_part 'rootfs')"
-[ -z "$boot" -o -z "$main" ] && {
+# first get an address for br-lan using udhcpc
+killall udhcpc
+/sbin/udhcpc -i br-lan
+
+mtd_kernel="$(find_mtd_part 'kernel')"
+mtd_rootfs="$(find_mtd_part 'rootfs')"
+[ -z "$mtd_kernel" -o -z "$mtd_rootfs" ] && {
        echo "Cannot find NAND Flash partitions"
        exit 1
 }
 
-echo "Erasing filesystem."
-mtd erase Boot 2>/dev/null >/dev/null
-mtd erase Main 2>/dev/null >/dev/null
+echo "Erasing filesystem..."
+mtd erase kernel 2>/dev/null >/dev/null
+mtd erase rootfs 2>/dev/null >/dev/null
+
+echo "Mounting $mtd_rootfs as new root and $mtd_kernel as kernel partition"
 
-echo "Mounting $main as new root and $boot as boot partition"
+mkdir /tmp/wget2nand-rootfs
+mkdir /tmp/wget2nand-kernel
+mount -t yaffs2 "$mtd_rootfs" /tmp/wget2nand-rootfs
+mount -t yaffs2 "$mtd_kernel" /tmp/wget2nand-kernel
 
-mkdir /tmp/wget2nand/
-mkdir /tmp/wget2nand-boot
-mount -t yaffs2 "$main" /tmp/wget2nand/
-mount -t yaffs2 "$boot" /tmp/wget2nand-boot
+echo "Erasing existing files..."
+rm -rf /tmp/wget2nand-rootfs/*
 
 echo "Copying filesystem..."
-( wget -O - $url/openwrt-adm5120-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz )
-wget -O /tmp/wget2nand-boot/kernel $url/openwrt-adm5120-2.6-rb1xx-vmlinux
+( wget -O - $url/openwrt-adm5120-router_le-rootfs.tar.gz) | ( cd /tmp/wget2nand-rootfs/; tar xvz )
+# RouterBOOT is looking for a kernel named "kernel"
+wget -O /tmp/wget2nand-kernel/kernel $url/openwrt-adm5120-router_le-vmlinux.elf
 
-chmod +x /tmp/wget2nand-boot/kernel
+chmod +x /tmp/wget2nand-kernel/kernel
 
 # make sure everything is written before we unmount the partitions
-echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission
+echo "chmod ugo+x /" > /tmp/wget2nand-rootfs/etc/uci-defaults/set_root_permission
 sync
-ls /tmp/wget2nand-boot/
-ls /tmp/wget2nand/
+ls /tmp/wget2nand-kernel/
+ls /tmp/wget2nand-rootfs/
+# use kexec if present
+[ -x /usr/sbin/kexec ] && {
+       kexec -l /tmp/wget2nand-kernel/kernel --command-line="$(cat /proc/cmdline) rootfstype=yaffs2 root=$mtd_kernel"
+       kexec -e
+}
 # unmount the partitions and remove the directories into which they were mounted
-umount /tmp/wget2nand-boot
-umount /tmp/wget2nand
-rmdir /tmp/wget2nand-boot
-rmdir /tmp/wget2nand
+umount /tmp/wget2nand-kernel
+umount /tmp/wget2nand-rootfs
+rmdir /tmp/wget2nand-kernel
+rmdir /tmp/wget2nand-rootfs
 
 # all done
 echo "Image written, you can now reboot.  Remember to change the boot source to Boot from Nand"