Fix a segfault in uclibc ldso.

[openwrt.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 7e3ebcd..44e2de2 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -13,7 +13,7 @@ start() {
                        # WGT634u
                        echo boardtype=wgt634u
                else
-                       strings /dev/mtdblock/3
+                       strings "$(find_mtd_part nvram)"
                fi
        ) | awk '
        function p(cfgname, name) {
@@ -47,11 +47,11 @@ start() {
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
        }
-       
+
        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
                nvram[$1] = $2
        }
-       
+
        END {
                if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
                        c["wan_ifname"] = ""
@@ -61,6 +61,20 @@ start() {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }
+               if (model == "ASUS WL-500g Premium V2") {
+                               c["vlan0ports"] = "0 1 2 3 5*"
+                               c["vlan1ports"] = "4 5"
+               }
+               if (model == "Dell TrueMobile 2300") {
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+               }
+               if (model == "Dell TrueMobile 2300 v2") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }
                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                        c["lan_ifname"] = "eth0"
@@ -93,6 +107,11 @@ start() {
                                }
                        }
                }
+               if (nvram["boardtype"] == "0x478") {
+                       # generic broadcom 4785 processor with 5397 switch?
+                       c["vlan0ports"] = "1 2 3 4 8*"
+                       c["vlan1ports"] = "0 8"
+               }
 
                # WAP54G
                if ((nvram["boardnum"] == "2") || \
@@ -100,7 +119,36 @@ start() {
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }
-       
+
+               # Sitecom WL-105b
+               if ((nvram["boardum"] == "2") && \
+                       (nvram["GemtekPmonVer"] == "1")) {
+                       c["lan_ifname"]="eth0"
+                       c["wan_ifname"]=""
+               }
+
+               # ASUS WL-700gE
+               # These are actually same as defaults above. For some reason this script applies
+               # Generic BCM94704 settings instead so we revert to proper settings here.
+               # Hopefully someone will fix this properly soon.
+               if (model == "ASUS WL-700gE") {
+                       c["lan_ifname"]="eth0.0"
+                       c["wan_ifname"]="eth0.1"
+                       c["vlan0ports"]="1 2 3 4 5*"
+                       c["vlan1ports"]="0 5"
+               }
+
+               if (model == "Motorola WR850G V2/V3") {
+                       c["vlan0ports"]="0 1 2 3 5*"
+                       c["vlan1ports"]="4 5"
+               }
+               if (model == "ASUS WL-500W") {
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+               }
+
                print "#### VLAN configuration "
                print "config switch eth0"
                p("vlan0", "vlan0ports")