add feeds.conf to .gitignore

[openwrt.git] / package / busybox / config / networking / Config.in

diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
index 0dbe42d..3da608d 100644 (file)
--- a/package/busybox/config/networking/Config.in
+++ b/package/busybox/config/networking/Config.in
@@ -12,6 +12,21 @@ config BUSYBOX_CONFIG_FEATURE_IPV6
          Enable IPv6 support in busybox.
          This adds IPv6 support in the networking applets.
 
          Enable IPv6 support in busybox.
          This adds IPv6 support in the networking applets.
 

+config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
+       bool "Preferentially use IPv4 addresses from DNS queries"
+       default y
+       depends on BUSYBOX_CONFIG_FEATURE_IPV6
+       help
+         Use IPv4 address of network host if it has one.
+
+         If this option is off, the first returned address will be used.
+         This may cause problems when your DNS server is IPv6-capable and
+         is returning IPv6 host addresses too. If IPv6 address
+         precedes IPv4 one in DNS reply, busybox network applets
+         (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+         or network applets will fail to connect to the host
+         using IPv6 address.
+

 config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
        bool "Verbose resolution errors"
        default y
 config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
        bool "Verbose resolution errors"
        default y


@@ -32,6 +47,32 @@ config BUSYBOX_CONFIG_ARPING
        help
          Ping hosts by ARP packets.
 
        help
          Ping hosts by ARP packets.
 

+config BUSYBOX_CONFIG_BRCTL
+       bool "brctl"
+       default n
+       help
+         Manage ethernet bridges.
+         Supports addbr/delbr and addif/delif.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+       bool "Fancy options"
+       default n
+       depends on BUSYBOX_CONFIG_BRCTL
+       help
+         Add support for extended option like:
+           setageing, setfd, sethello, setmaxage,
+           setpathcost, setportprio, setbridgeprio,
+           stp
+         This adds about 600 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
+       bool "Support show, showmac and showstp"
+       default n
+       depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+       help
+         Add support for option which prints the current config:
+           showmacs, showstp, show
+

 config BUSYBOX_CONFIG_DNSD
        bool "dnsd"
        default n
 config BUSYBOX_CONFIG_DNSD
        bool "dnsd"
        default n


@@ -101,7 +142,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
          instead of read/write loop.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
          instead of read/write loop.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP

-       bool "Support reloading the global config file using hup signal"
+       bool "Support reloading of global config file on HUP signal"

        default y
        depends on BUSYBOX_CONFIG_HTTPD
        help
        default y
        depends on BUSYBOX_CONFIG_HTTPD
        help


@@ -151,7 +192,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
          when specific URLs are requested.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
          when specific URLs are requested.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR

-       bool "Enable support for running scripts through an interpreter"
+       bool "Support for running scripts through an interpreter"

        default y
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help
        default y
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help


@@ -162,7 +203,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
          *.php:/path/to/your/php
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
          *.php:/path/to/your/php
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV

-       bool "Support the REMOTE_PORT environment variable for CGI"
+       bool "Set REMOTE_PORT environment variable for CGI"

        default y
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help
        default y
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help


@@ -170,17 +211,17 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
          references that contain a unique port number.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
          references that contain a unique port number.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR

-       bool "Enable the -e option for shell script CGI simplification."
+       bool "Enable -e option (useful for CGIs written as shell scripts)"

        default y
        depends on BUSYBOX_CONFIG_HTTPD
        help
        default y
        depends on BUSYBOX_CONFIG_HTTPD
        help

-         This option allows html encoding arbitrary
-         strings for display of the browser.  Output goes to stdout.
-         For example, httpd -e "<Hello World>" as
+         This option allows html encoding of arbitrary strings for display
+         by the browser.  Output goes to stdout.
+         For example, httpd -e "<Hello World>" produces

          "&#60Hello&#32World&#62".
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
          "&#60Hello&#32World&#62".
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES

-       bool "Enable support for custom error pages"
+       bool "Support for custom error pages"

        default y
        depends on BUSYBOX_CONFIG_HTTPD
        help
        default y
        depends on BUSYBOX_CONFIG_HTTPD
        help


@@ -193,7 +234,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
          message.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
          message.
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY

-       bool "Enable support for reverse proxy"
+       bool "Support for reverse proxy"

        default n
        depends on BUSYBOX_CONFIG_HTTPD
        help
        default n
        depends on BUSYBOX_CONFIG_HTTPD
        help


@@ -251,6 +292,13 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
          Setting this will make ifconfig attempt to find the broadcast
          automatically if the value '+' is used.
 
          Setting this will make ifconfig attempt to find the broadcast
          automatically if the value '+' is used.
 

+config BUSYBOX_CONFIG_IFENSLAVE
+       bool "ifenslave"
+       default n
+       help
+         Userspace application to bind several interfaces
+         to a logical interface (use with kernel bonding driver).
+

 config BUSYBOX_CONFIG_IFUPDOWN
        bool "ifupdown"
        default n
 config BUSYBOX_CONFIG_IFUPDOWN
        bool "ifupdown"
        default n


@@ -315,14 +363,14 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
          work.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
          work.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4

-       bool "Enable support for IPv4"
+       bool "Support for IPv4"

        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
          If you want ifup/ifdown to talk IPv4, leave this on.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
          If you want ifup/ifdown to talk IPv4, leave this on.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6

-       bool "Enable support for IPv6"
+       bool "Support for IPv6"

        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
        help
        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
        help


@@ -330,7 +378,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
 
 ### UNUSED
 ###config FEATURE_IFUPDOWN_IPX
 
 ### UNUSED
 ###config FEATURE_IFUPDOWN_IPX

-###    bool "Enable support for IPX"
+###    bool "Support for IPX"

 ###    default n
 ###    depends on IFUPDOWN
 ###    help
 ###    default n
 ###    depends on IFUPDOWN
 ###    help


@@ -346,7 +394,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
          a weird network setup you don't need it.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
          a weird network setup you don't need it.
 
 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP

-       bool "Enable support for external dhcp clients"
+       bool "Support for external dhcp clients"

        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help
        default n
        depends on BUSYBOX_CONFIG_IFUPDOWN
        help


@@ -449,7 +497,7 @@ config BUSYBOX_CONFIG_FEATURE_IP_RULE
          Add support for rule commands to "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
          Add support for rule commands to "ip".
 
 config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS

-       bool "Support short forms of ip commands."
+       bool "Support short forms of ip commands"

        default n
        depends on BUSYBOX_CONFIG_IP
        help
        default n
        depends on BUSYBOX_CONFIG_IP
        help


@@ -528,19 +576,32 @@ config BUSYBOX_CONFIG_NAMEIF
          Renamed interfaces MUST be in the down state.
          It is possible to use a file (default: /etc/mactab)
          with list of new interface names and MACs.
          Renamed interfaces MUST be in the down state.
          It is possible to use a file (default: /etc/mactab)
          with list of new interface names and MACs.

-         Maximum interface name length: IF_NAMESIZE = 16
+         Maximum interface name length: IFNAMSIZ = 16

          File fields are separated by space or tab.
          File format:
          # Comment
          new_interface_name    XX:XX:XX:XX:XX:XX
 
          File fields are separated by space or tab.
          File format:
          # Comment
          new_interface_name    XX:XX:XX:XX:XX:XX
 

+config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
+       bool "Extended nameif"
+       default n
+       depends on BUSYBOX_CONFIG_NAMEIF
+       help
+         This extends the nameif syntax to support the bus_info and driver
+         checks. The syntax is compatible to the normal nameif.
+         File format:
+           new_interface_name  driver=asix bus=usb-0000:00:08.2-3
+           new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+           new_interface_name  mac=00:80:C8:38:91:B5
+           new_interface_name  00:80:C8:38:91:B5
+

 config BUSYBOX_CONFIG_NC
        bool "nc"
        default y
        help
          A simple Unix utility which reads and writes data across network
          connections.
 config BUSYBOX_CONFIG_NC
        bool "nc"
        default y
        help
          A simple Unix utility which reads and writes data across network
          connections.

-         
+

 config BUSYBOX_CONFIG_NETMSG
        bool "netmsg"
        default y
 config BUSYBOX_CONFIG_NETMSG
        bool "netmsg"
        default y


@@ -570,7 +631,7 @@ config BUSYBOX_CONFIG_NETSTAT
          netstat prints information about the Linux networking subsystem.
 
 config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
          netstat prints information about the Linux networking subsystem.
 
 config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE

-       bool "  Enable wide netstat output"
+       bool "Enable wide netstat output"

        default y
        depends on BUSYBOX_CONFIG_NETSTAT
        help
        default y
        depends on BUSYBOX_CONFIG_NETSTAT
        help


@@ -597,12 +658,6 @@ config BUSYBOX_CONFIG_PING6
        help
          This will give you a ping that can talk IPv6.
 
        help
          This will give you a ping that can talk IPv6.
 

-config BUSYBOX_CONFIG_PSCAN
-       bool "pscan"
-       default n
-       help
-         Simple network port scanner.
-

 config BUSYBOX_CONFIG_FEATURE_FANCY_PING
        bool "Enable fancy ping output"
        default y
 config BUSYBOX_CONFIG_FEATURE_FANCY_PING
        bool "Enable fancy ping output"
        default y


@@ -611,12 +666,30 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_PING
          Make the output from the ping applet include statistics, and at the
          same time provide full support for ICMP packets.
 
          Make the output from the ping applet include statistics, and at the
          same time provide full support for ICMP packets.
 

+config BUSYBOX_CONFIG_PSCAN
+       bool "pscan"
+       default n
+       help
+         Simple network port scanner.
+

 config BUSYBOX_CONFIG_ROUTE
        bool "route"
        default y
        help
          Route displays or manipulates the kernel's IP routing tables.
 
 config BUSYBOX_CONFIG_ROUTE
        bool "route"
        default y
        help
          Route displays or manipulates the kernel's IP routing tables.
 

+config BUSYBOX_CONFIG_SENDMAIL
+       bool "sendmail"
+       default n
+       help
+         Barebones sendmail.
+
+config BUSYBOX_CONFIG_FETCHMAIL
+       bool "fetchmail"
+       default n
+       help
+         Barebones fetchmail.
+

 config BUSYBOX_CONFIG_SLATTACH
        bool "slattach"
        default n
 config BUSYBOX_CONFIG_SLATTACH
        bool "slattach"
        default n


@@ -707,28 +780,41 @@ config BUSYBOX_CONFIG_TFTP
          is usually used for simple, small transfers such as a root image
          for a network-enabled bootloader.
 
          is usually used for simple, small transfers such as a root image
          for a network-enabled bootloader.
 

+config BUSYBOX_CONFIG_TFTPD
+       bool "tftpd"
+       default n
+       help
+         This enables the Trivial File Transfer Protocol server program.
+         It expects that stdin is a datagram socket and a packet
+         is already pending on it. It will exit after one transfer.
+         In other words: it should be run from inetd in nowait mode,
+         or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+

 config BUSYBOX_CONFIG_FEATURE_TFTP_GET
        bool "Enable \"get\" command"
        default n
 config BUSYBOX_CONFIG_FEATURE_TFTP_GET
        bool "Enable \"get\" command"
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD

        help
          Add support for the GET command within the TFTP client.  This allows
          a client to retrieve a file from a TFTP server.
        help
          Add support for the GET command within the TFTP client.  This allows
          a client to retrieve a file from a TFTP server.

+         Also enable upload support in tftpd, if tftpd is selected.

 
 config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
        bool "Enable \"put\" command"
        default n
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
        bool "Enable \"put\" command"
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD

        help
          Add support for the PUT command within the TFTP client.  This allows
          a client to transfer a file to a TFTP server.
        help
          Add support for the PUT command within the TFTP client.  This allows
          a client to transfer a file to a TFTP server.

+         Also enable download support in tftpd, if tftpd is selected.

 
 config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
 
 config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE

-       bool "Enable \"blocksize\" command"
+       bool "Enable \"blksize\" protocol option"

        default n
        default n

-       depends on BUSYBOX_CONFIG_TFTP
+       depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD

        help
        help

-         Allow the client to specify the desired block size for transfers.
+         Allow tftp to specify block size, and tftpd to understand
+         "blksize" option.

 
 config BUSYBOX_CONFIG_DEBUG_TFTP
        bool "Enable debug"
 
 config BUSYBOX_CONFIG_DEBUG_TFTP
        bool "Enable debug"


@@ -816,4 +902,16 @@ config BUSYBOX_CONFIG_ZCIP
          See http://www.zeroconf.org for further details, and "zcip.script"
          in the busybox examples.
 
          See http://www.zeroconf.org for further details, and "zcip.script"
          in the busybox examples.
 

+config BUSYBOX_CONFIG_TCPSVD
+       bool "tcpsvd"
+       default n
+       help
+         tcpsvd listens on a TCP port and runs a program for each new connection
+
+config BUSYBOX_CONFIG_UDPSVD
+       bool "udpsvd"
+       default n
+       help
+         udpsvd listens on an UDP port and runs a program for each new connection
+

 endmenu
 endmenu