+++ /dev/null
---- a/ath/if_ath.c
-+++ b/ath/if_ath.c
-@@ -343,6 +343,8 @@
- unsigned int param, unsigned int value);
-
- static u_int32_t ath_get_real_maxtxpower(struct ath_softc *sc);
-+static int ath_setintmit(struct ath_softc *sc);
-+static u_int32_t ath_calcrxfilter(struct ath_softc *sc);
-
- #ifdef AR_DEBUG
- static int ath_txq_check(struct ath_softc *sc, struct ath_txq *txq, const char *msg);
-@@ -356,7 +358,6 @@
- static char *ratectl = DEF_RATE_CTL;
- static int rfkill = 0;
- static int hal_tpc = 0;
--static int intmit = 0;
- static int countrycode = CTRY_DEFAULT;
- static int maxvaps = ATH_MAXVAPS_DEFAULT;
- static int outdoor = 0;
-@@ -398,7 +399,6 @@
- #endif
- MODULE_PARM(autocreate, "s");
- MODULE_PARM(ratectl, "s");
--MODULE_PARM(intmit, "i");
- #else
- #include <linux/moduleparam.h>
- module_param(beacon_cal, int, 0600);
-@@ -412,7 +412,6 @@
- #endif
- module_param(autocreate, charp, 0600);
- module_param(ratectl, charp, 0600);
--module_param(intmit, int, 0600);
- #endif
- MODULE_PARM_DESC(countrycode, "Override default country code. Default is 0.");
- MODULE_PARM_DESC(maxvaps, "Maximum VAPs. Default is 4.");
-@@ -428,7 +427,6 @@
- "'none' to disable");
- MODULE_PARM_DESC(ratectl, "Rate control algorithm [amrr|minstrel|onoe|sample], "
- "defaults to '" DEF_RATE_CTL "'");
--MODULE_PARM_DESC(intmit, "Enable interference mitigation by default. Default is 0.");
-
- #ifdef AR_DEBUG
- static int ath_debug = 0;
-@@ -585,23 +583,13 @@
- if (ath_hal_hastxpowlimit(ah)) {
- ic->ic_caps |= IEEE80211_C_TXPMGT;
- }
-- /* Interference mitigation/ambient noise immunity (ANI).
-- * In modes other than HAL_M_STA, it causes receive sensitivity
-- * problems for OFDM. */
-+ /* Interference mitigation/ambient noise immunity (ANI). */
- sc->sc_hasintmit = ath_hal_hasintmit(ah);
-- sc->sc_useintmit = (intmit && sc->sc_hasintmit);
-- if (!sc->sc_hasintmit && intmit) {
-- WPRINTF(sc, "Interference mitigation was requested, but is not"
-- "supported by the HAL/hardware.\n");
-- intmit = 0; /* Stop use in future ath_attach(). */
-- }
-- else {
-- ath_hal_setintmit(ah, sc->sc_useintmit);
-- DPRINTF(sc, ATH_DEBUG_ANY, "Interference mitigation is "
-- "supported. Currently %s.\n",
-- (sc->sc_useintmit ? "enabled" : "disabled"));
-- }
-
-+ /* auto, mode dependent */
-+ sc->sc_useintmit = -1;
-+ sc->sc_noise_immunity = -1;
-+ sc->sc_ofdm_weak_det = -1;
- sc->sc_dmasize_stomp = 0;
-
- /*
-@@ -614,15 +602,6 @@
- sc->sc_mrretry = ath_hal_setupxtxdesc(ah, NULL, 0,0, 0,0, 0,0);
-
- /*
-- * Check if the device has hardware counters for PHY
-- * errors. If so we need to enable the MIB interrupt
-- * so we can act on stat triggers.
-- */
-- sc->sc_needmib = ath_hal_hwphycounters(ah) &&
-- sc->sc_hasintmit &&
-- sc->sc_useintmit;
--
-- /*
- * Get the hardware key cache size.
- */
- sc->sc_keymax = ath_hal_keycachesize(ah);
-@@ -1593,37 +1572,6 @@
- ath_init(dev);
- }
-
--/* NB: Int. mit. was not implemented so that it could be enabled/disabled,
-- * and actually in 0.9.30.13 HAL it really can't even be disabled because
-- * it will start adjusting registers even when we turn off the capability
-- * in the HAL.
-- *
-- * NB: This helper function basically clobbers all the related registers
-- * if we have disabled int. mit. cap, allowing us to turn it on and off and
-- * work around the bug preventing it from being disabled. */
--static inline void ath_override_intmit_if_disabled(struct ath_softc *sc) {
-- /* Restore int. mit. registers if they were turned off. */
-- if (sc->sc_hasintmit && !sc->sc_useintmit)
-- ath_hal_restore_default_intmit(sc->sc_ah);
-- /* Sanity check... remove later. */
-- if (!sc->sc_useintmit) {
-- ath_hal_verify_default_intmit(sc->sc_ah);
-- /* If we don't have int. mit. and we don't have DFS on channel,
-- * it is safe to filter error packets. */
-- if (!ath_radar_is_dfs_required(sc, &sc->sc_curchan)) {
-- ath_hal_setrxfilter(sc->sc_ah,
-- ath_hal_getrxfilter(sc->sc_ah) &
-- ~HAL_RX_FILTER_PHYERR);
-- }
-- }
-- else {
-- /* Make sure that we have errors in RX filter because ANI needs
-- * them. */
-- ath_hal_setrxfilter(sc->sc_ah,
-- ath_hal_getrxfilter(sc->sc_ah) | HAL_RX_FILTER_PHYERR);
-- }
--}
--
- static HAL_BOOL ath_hw_reset(struct ath_softc *sc, HAL_OPMODE opmode,
- HAL_CHANNEL *channel, HAL_BOOL bChannelChange,
- HAL_STATUS *status)
-@@ -1698,11 +1646,7 @@
- ath_hal_settpc(sc->sc_ah, hal_tpc);
- }
- #endif
--#if 0 /* Setting via HAL does not work, so it is done manually below. */
-- if (sc->sc_hasintmit)
-- ath_hal_setintmit(sc->sc_ah, sc->sc_useintmit);
--#endif
-- ath_override_intmit_if_disabled(sc);
-+ ath_setintmit(sc);
- if (sc->sc_dmasize_stomp)
- ath_hal_set_dmasize_pcie(sc->sc_ah);
- if (sc->sc_softled)
-@@ -2496,7 +2440,6 @@
-
- /* Let the HAL handle the event. */
- ath_hal_mibevent(ah, &sc->sc_halstats);
-- ath_override_intmit_if_disabled(sc);
- }
- }
- if (needmark)
-@@ -2564,6 +2507,55 @@
- return flags;
- }
-
-+static int ath_setintmit(struct ath_softc *sc)
-+{
-+ struct ath_hal *ah = sc->sc_ah;
-+ int ret;
-+ int val;
-+
-+ if (!sc->sc_hasintmit)
-+ return 0;
-+
-+ switch(sc->sc_useintmit) {
-+ case 0: /* disabled */
-+ case 1: /* enabled */
-+ val = sc->sc_useintmit;
-+ break;
-+ default:
-+ if (sc->sc_opmode != IEEE80211_M_MONITOR)
-+ val = 1;
-+ else
-+ val = 0;
-+ break;
-+ }
-+ ret = ath_hal_setintmit(ah, val);
-+ if (val)
-+ goto done;
-+
-+ /* manual settings */
-+ if ((sc->sc_noise_immunity >= 0) && (sc->sc_noise_immunity <= 5))
-+ ath_hal_setcapability(ah, HAL_CAP_INTMIT, 2, sc->sc_noise_immunity, NULL);
-+ if ((sc->sc_ofdm_weak_det == 0) || (sc->sc_ofdm_weak_det == 1))
-+ ath_hal_setcapability(ah, HAL_CAP_INTMIT, 3, sc->sc_ofdm_weak_det, NULL);
-+
-+done:
-+ if (!sc->sc_imask)
-+ goto out;
-+
-+ /* MIB interrupt handling */
-+ sc->sc_needmib = ath_hal_hwphycounters(ah) &&
-+ sc->sc_useintmit;
-+ if (sc->sc_needmib)
-+ sc->sc_imask |= HAL_INT_MIB;
-+ else
-+ sc->sc_imask &= ~HAL_INT_MIB;
-+ ath_hal_intrset(sc->sc_ah, sc->sc_imask);
-+ ath_calcrxfilter(sc);
-+
-+out:
-+ return ret;
-+}
-+
- /*
- * Context: process context
- */
-@@ -4249,8 +4241,7 @@
- u_int32_t rfilt;
-
- /* Preserve the current Phy. radar and err. filters. */
-- rfilt = (ath_hal_getrxfilter(ah) &
-- (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR)) |
-+ rfilt = (ath_hal_getrxfilter(ah) & HAL_RX_FILTER_PHYRADAR) |
- HAL_RX_FILTER_UCAST | HAL_RX_FILTER_BCAST |
- HAL_RX_FILTER_MCAST;
- if (ic->ic_opmode != IEEE80211_M_STA)
-@@ -4266,6 +4257,8 @@
- if (sc->sc_nmonvaps > 0)
- rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON |
- HAL_RX_FILTER_PROBEREQ | HAL_RX_FILTER_PROM);
-+ if (sc->sc_hasintmit && !sc->sc_needmib && ath_hal_getintmit(ah, NULL))
-+ rfilt |= HAL_RX_FILTER_PHYERR;
- if (sc->sc_curchan.privFlags & CHANNEL_DFS)
- rfilt |= (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR);
- return rfilt;
-@@ -6810,8 +6803,7 @@
- dev->quota -= bf_processed;
- #endif
-
-- if (sc->sc_useintmit)
-- ath_hal_rxmonitor(ah, &sc->sc_halstats, &sc->sc_curchan);
-+ ath_hal_rxmonitor(ah, &sc->sc_halstats, &sc->sc_curchan);
- if (!bf_processed)
- DPRINTF(sc, ATH_DEBUG_RX_PROC,
- "Warning: %s got scheduled when no receive "
-@@ -8727,7 +8719,6 @@
- ath_hal_rxena(ah); /* enable recv descriptors */
- ath_mode_init(dev); /* set filters, etc. */
- ath_hal_startpcurecv(ah); /* re-enable PCU/DMA engine */
-- ath_override_intmit_if_disabled(sc);
- return 0;
- }
-
-@@ -10633,8 +10624,10 @@
- ATH_RP_IGNORED = 24,
- ATH_RADAR_IGNORED = 25,
- ATH_MAXVAPS = 26,
-- ATH_INTMIT = 27,
-- ATH_DISTANCE = 28,
-+ ATH_DISTANCE = 27,
-+ ATH_INTMIT = 28,
-+ ATH_NOISE_IMMUNITY = 29,
-+ ATH_OFDM_WEAK_DET = 30
- };
-
- static inline int
-@@ -10696,6 +10689,48 @@
- }
-
- static int
-+ath_sysctl_set_intmit(struct ath_softc *sc, long ctl, u_int val)
-+{
-+ int ret;
-+
-+ switch(ctl) {
-+ case ATH_INTMIT:
-+ sc->sc_intmit = val;
-+ break;
-+ case ATH_NOISE_IMMUNITY:
-+ sc->sc_noise_immunity = val;
-+ break;
-+ case ATH_OFDM_WEAK_DET:
-+ sc->sc_ofdm_weak_det = val;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ ret = ath_setintmit(sc);
-+ return ret;
-+}
-+
-+static int
-+ath_sysctl_get_intmit(struct ath_softc *sc, long ctl, u_int *val)
-+{
-+ struct ath_hal *ah = sc->sc_ah;
-+
-+ switch(ctl) {
-+ case ATH_INTMIT:
-+ *val = (ath_hal_getcapability(ah, HAL_CAP_INTMIT, 1, NULL) == HAL_OK);
-+ break;
-+ case ATH_NOISE_IMMUNITY:
-+ return ath_hal_getcapability(ah, HAL_CAP_INTMIT, 2, val);
-+ case ATH_OFDM_WEAK_DET:
-+ return ath_hal_getcapability(ah, HAL_CAP_INTMIT, 3, val);
-+ default:
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+
-+static int
- ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos)
- {
- struct ath_softc *sc = ctl->extra1;
-@@ -10934,30 +10969,13 @@
- sc->sc_radar_ignored = val;
- break;
- case ATH_INTMIT:
-- if (!sc->sc_hasintmit) {
-+ case ATH_NOISE_IMMUNITY:
-+ case ATH_OFDM_WEAK_DET:
-+ if (!sc->sc_hasintmit)
- ret = -EOPNOTSUPP;
-- break;
-- }
-- if (sc->sc_useintmit == val)
-- break;
-- sc->sc_useintmit = val;
-- sc->sc_needmib = ath_hal_hwphycounters(ah) &&
-- sc->sc_useintmit;
-- /* Update the HAL and MIB interrupt mask bits */
-- ath_hal_setintmit(ah, !!val);
-- sc->sc_imask = (sc->sc_imask & ~HAL_INT_MIB) |
-- (sc->sc_needmib ? HAL_INT_MIB : 0);
-- ath_hal_intrset(sc->sc_ah, sc->sc_imask);
-- /* Only do a reset if device is valid and UP
-- * and we just made a change to the settings. */
-- if (sc->sc_dev && !sc->sc_invalid &&
-- (sc->sc_dev->flags & IFF_RUNNING))
-- ath_reset(sc->sc_dev);
-- /* NB: Run this step to cleanup if HAL doesn't
-- * obey capability flags and hangs onto ANI
-- * settings. */
-- ath_override_intmit_if_disabled(sc);
-- break;
-+ else
-+ ret = ath_sysctl_set_intmit(sc, (long)ctl->extra2, val);
-+ break;
- default:
- ret = -EINVAL;
- break;
-@@ -11029,9 +11047,14 @@
- case ATH_RADAR_IGNORED:
- val = sc->sc_radar_ignored;
- break;
-- case ATH_INTMIT:
-- val = sc->sc_useintmit;
-- break;
-+ case ATH_INTMIT:
-+ case ATH_NOISE_IMMUNITY:
-+ case ATH_OFDM_WEAK_DET:
-+ if (!sc->sc_hasintmit)
-+ ret = -EOPNOTSUPP;
-+ else
-+ ret = ath_sysctl_get_intmit(sc, (long)ctl->extra2, &val);
-+ break;
- default:
- ret = -EINVAL;
- break;
-@@ -11413,6 +11436,24 @@
- .maxlen = sizeof(ath_xchanmode),
- .proc_handler = proc_dointvec
- },
-+ { .ctl_name = CTL_AUTO,
-+ .procname = "intmit",
-+ .mode = 0644,
-+ .proc_handler = ath_sysctl_halparam,
-+ .extra2 = (void *)ATH_INTMIT,
-+ },
-+ { .ctl_name = CTL_AUTO,
-+ .procname = "noise_immunity",
-+ .mode = 0644,
-+ .proc_handler = ath_sysctl_halparam,
-+ .extra2 = (void *)ATH_NOISE_IMMUNITY,
-+ },
-+ { .ctl_name = CTL_AUTO,
-+ .procname = "ofdm_weak_det",
-+ .mode = 0644,
-+ .proc_handler = ath_sysctl_halparam,
-+ .extra2 = (void *)ATH_OFDM_WEAK_DET,
-+ },
- { 0 }
- };
- static ctl_table ath_ath_table[] = {
---- a/ath/if_athvar.h
-+++ b/ath/if_athvar.h
-@@ -712,6 +712,10 @@
- unsigned int sc_txcont_power; /* Continuous transmit power in 0.5dBm units */
- unsigned int sc_txcont_rate; /* Continuous transmit rate in Mbps */
-
-+ int8_t sc_intmit; /* Interference mitigation enabled, -1 = auto, based on mode, 0/1 = off/on */
-+ int8_t sc_noise_immunity; /* Noise immunity level, 0-4, -1 == auto) */
-+ int8_t sc_ofdm_weak_det; /* OFDM weak frames detection, -1 == auto */
-+
- /* rate tables */
- const HAL_RATE_TABLE *sc_rates[IEEE80211_MODE_MAX];
- const HAL_RATE_TABLE *sc_currates; /* current rate table */
---- a/ath/if_ath_hal_extensions.h
-+++ b/ath/if_ath_hal_extensions.h
-@@ -237,296 +237,18 @@
- AR5K_DMASIZE_512B
- };
-
--
--int ath_set_ack_bitrate(struct ath_softc *sc, int);
--int ar_device(int devid);
--const char * ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val);
--
--static inline unsigned long field_width(unsigned long mask, unsigned long shift)
--{
-- unsigned long r = 0;
-- unsigned long x = mask >> shift;
-- if ( 0 == mask ) return 0;
--#if BITS_PER_LONG >= 64
-- if ( x & (~0UL<<32) ) { x >>= 32; r += 32; }
--#endif
-- if ( x & 0xffff0000 ) { x >>= 16; r += 16; }
-- if ( x & 0x0000ff00 ) { x >>= 8; r += 8; }
-- if ( x & 0x000000f0 ) { x >>= 4; r += 4; }
-- if ( x & 0x0000000c ) { x >>= 2; r += 2; }
-- if ( x & 0x00000002 ) { r += 1; }
-- return r+1;
--}
--
--static inline u_int32_t get_field(struct ath_hal *ah, u_int32_t reg, u_int32_t mask, u_int32_t shift, int is_signed) {
-- unsigned long x = ((OS_REG_READ(ah, reg) & mask) >> shift);
-- if (is_signed) {
-- unsigned long c =(-1) << (field_width(mask, shift)-1);
-- return (x + c) ^ c;
-- }
-- return x;
--}
--
- static inline void set_field(struct ath_hal *ah, u_int32_t reg, u_int32_t mask, u_int32_t shift, u_int32_t value) {
- OS_REG_WRITE(ah, reg,
- (OS_REG_READ(ah, reg) & ~mask) |
- ((value << shift) & mask));
- }
-
--static inline u_int32_t field_eq(struct ath_hal *ah, u_int32_t reg,
-- u_int32_t mask, u_int32_t shift,
-- u_int32_t value, int is_signed) {
-- return (get_field(ah, reg, mask, shift, is_signed) & (mask >> shift)) ==
-- (value & (mask >> shift));
--}
--
--static inline void override_warning(struct ath_hal *ah, const char *name,
-- u_int32_t reg, u_int32_t mask,
-- u_int32_t shift, u_int32_t expected, int is_signed) {
--
-- if (!field_eq(ah, reg, mask, shift, expected, is_signed))
-- printk("%s: Correcting 0x%04x[%s] from 0x%x (%d) to 0x%x (%d).\n",
-- SC_DEV_NAME(ah->ah_sc),
-- reg,
-- name,
-- (get_field(ah, reg, mask, shift, is_signed) & (mask >> shift)),
-- get_field(ah, reg, mask, shift, is_signed),
-- (expected & (mask >> shift)), /* not sign extended */
-- expected);
--#if 0 /* NB: For checking to see if HAL is fixed or not */
-- else {
-- printk("%s: Keeping 0x%04x[%s] - 0x%x (%d).\n",
-- SC_DEV_NAME(ah->ah_sc),
-- reg,
-- name,
-- (get_field(ah, reg, mask, shift, is_signed) & (mask >> shift)),
-- get_field(ah, reg, mask, shift, is_signed));
-- }
--#endif
--}
--
--static inline void verification_warning(struct ath_hal *ah, const char *name,
-- u_int32_t reg, u_int32_t mask,
-- u_int32_t shift, u_int32_t expected, int is_signed) {
--
-- int ret = field_eq(ah, reg, mask, shift, expected, is_signed);
-- if (!ret) {
-- printk("%s: %s verification of %s default value "
-- "[found=0x%x (%d) expected=0x%x (%d)].\n",
-- SC_DEV_NAME(ah->ah_sc),
-- (ret ? "PASSED" : "FAILED"),
-- name,
-- (get_field(ah, reg, mask, shift, is_signed) & (mask >> shift)),
-- get_field(ah, reg, mask, shift, is_signed),
-- (expected & (mask >> shift)), /* not sign extended */
-- expected);
-- ath_hal_print_decoded_register(ah, NULL, reg,
-- OS_REG_READ(ah, reg), OS_REG_READ(ah, reg), 0);
-- }
--}
--
--#define GET_FIELD(ah, __reg, __mask, __signed) \
-- get_field(ah, __reg, __mask, __mask ## _S, __signed)
- #define SET_FIELD(ah, __reg, __mask, __value) \
- set_field(ah, __reg, __mask, __mask ## _S, __value);
--#define FIELD_EQ(ah, __reg, __mask, __value, __signed) \
-- field_eq(ah, __reg, __mask, __mask ## _S, __value, __signed)
--
--#if 0 /* NB: These are working at this point, and HAL tweaks them a lot */
--#define OVERRIDE_WARNING(ah, __reg, __mask, __expected, __signed) \
-- override_warning(ah, #__mask, __reg, __mask, __mask ## _S, __expected, __signed)
--#else
--#define OVERRIDE_WARNING(ah, __reg, __mask, __expected, __signed)
--#endif
--
--#define VERIFICATION_WARNING(ah, __reg, __mask, __signed) \
-- verification_warning(ah, #__mask, __reg, __mask, __mask ## _S, DEFAULT_ ## __mask, __signed)
--#define VERIFICATION_WARNING_SW(ah, __reg, __mask, __signed) \
-- verification_warning(ah, #__mask, __reg, __mask, __mask ## _S, DEFAULT_ENABLE_ ## __reg ? __mask ## _ON : __mask ## _OFF, __signed)
--
--static inline void ath_hal_set_noise_immunity(struct ath_hal *ah,
-- int agc_desired_size,
-- int agc_coarse_hi,
-- int agc_coarse_lo,
-- int sig_firpwr)
--{
-- ATH_HAL_LOCK_IRQ(ah->ah_sc);
-- ath_hal_set_function(__func__);
-- ath_hal_set_device(SC_DEV_NAME(ah->ah_sc));
--
--#if 0 /* NB: These are working at this point, and HAL tweaks them a lot */
-- OVERRIDE_WARNING(ah, AR5K_PHY_AGCSIZE, AR5K_PHY_AGCSIZE_DESIRED, agc_desired_size, 1);
-- OVERRIDE_WARNING(ah, AR5K_PHY_AGCCOARSE, AR5K_PHY_AGCCOARSE_LO, agc_coarse_lo, 1);
-- OVERRIDE_WARNING(ah, AR5K_PHY_AGCCOARSE, AR5K_PHY_AGCCOARSE_HI, agc_coarse_hi, 1);
-- OVERRIDE_WARNING(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRPWR, sig_firpwr, 1);
--#endif
--
-- SET_FIELD(ah, AR5K_PHY_AGCSIZE, AR5K_PHY_AGCSIZE_DESIRED, agc_desired_size);
-- SET_FIELD(ah, AR5K_PHY_AGCCOARSE, AR5K_PHY_AGCCOARSE_LO, agc_coarse_lo);
-- SET_FIELD(ah, AR5K_PHY_AGCCOARSE, AR5K_PHY_AGCCOARSE_HI, agc_coarse_hi);
-- SET_FIELD(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRPWR, sig_firpwr);
--
-- ath_hal_set_function(NULL);
-- ath_hal_set_device(NULL);
-- ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
--}
--
--static inline void ath_hal_set_ofdm_weak_det(struct ath_hal *ah,
-- int low_m1, int low_m2, int low_m2_count, int low_self_corr,
-- int high_m1, int high_m2, int high_m2_count)
--{
-- ATH_HAL_LOCK_IRQ(ah->ah_sc);
-- ath_hal_set_function(__func__);
-- ath_hal_set_device(SC_DEV_NAME(ah->ah_sc));
--
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M1, low_m1, 0);
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M2, low_m2, 0);
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M2_COUNT, low_m2_count, 0);
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_SELFCOR, low_self_corr, 0);
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M1, high_m1, 0);
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M2, high_m2, 0);
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M2_COUNT, high_m2_count, 0);
--
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M1, low_m1);
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M2, low_m2);
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M2_COUNT, low_m2_count);
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_SELFCOR, low_self_corr);
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M1, high_m1);
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M2, high_m2);
-- SET_FIELD(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M2_COUNT, high_m2_count);
--
-- ath_hal_set_function(NULL);
-- ath_hal_set_device(NULL);
-- ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
--}
--
--static inline void ath_hal_set_cck_weak_det(struct ath_hal *ah, int thresh)
--{
-- ATH_HAL_LOCK_IRQ(ah->ah_sc);
-- ath_hal_set_function(__func__);
-- ath_hal_set_device(SC_DEV_NAME(ah->ah_sc));
--
-- OVERRIDE_WARNING(ah, AR5K_PHY_WEAK_CCK, AR5K_PHY_WEAK_CCK_THRESH, thresh, 0);
--
-- SET_FIELD(ah, AR5K_PHY_WEAK_CCK, AR5K_PHY_WEAK_CCK_THRESH, thresh);
--
-- ath_hal_set_function(NULL);
-- ath_hal_set_device(NULL);
-- ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
--}
--
--static inline void ath_hal_set_sig_firstep(struct ath_hal *ah, int firstep)
--{
-- ATH_HAL_LOCK_IRQ(ah->ah_sc);
-- ath_hal_set_function(__func__);
-- ath_hal_set_device(SC_DEV_NAME(ah->ah_sc));
-
-- OVERRIDE_WARNING(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRSTEP, firstep, 0);
--
-- SET_FIELD(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRSTEP, firstep);
--
-- ath_hal_set_function(NULL);
-- ath_hal_set_device(NULL);
-- ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
--}
--
--static inline void ath_hal_set_spur_immunity(struct ath_hal *ah, int thresh)
--{
-- ATH_HAL_LOCK_IRQ(ah->ah_sc);
-- ath_hal_set_function(__func__);
-- ath_hal_set_device(SC_DEV_NAME(ah->ah_sc));
--
-- OVERRIDE_WARNING(ah, AR5K_PHY_SPUR, AR5K_PHY_SPUR_THRESH, thresh, 0);
--
-- SET_FIELD(ah, AR5K_PHY_SPUR, AR5K_PHY_SPUR_THRESH, thresh);
--
-- ath_hal_set_function(NULL);
-- ath_hal_set_device(NULL);
-- ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
--}
--
--static inline void ath_hal_restore_default_noise_immunity(struct ath_hal *ah) {
--
-- ath_hal_set_noise_immunity(ah,
-- DEFAULT_AR5K_PHY_AGCSIZE_DESIRED,
-- DEFAULT_AR5K_PHY_AGCCOARSE_HI,
-- DEFAULT_AR5K_PHY_AGCCOARSE_LO,
-- DEFAULT_AR5K_PHY_SIG_FIRPWR);
--}
--
--static inline void ath_hal_enable_ofdm_weak_det(struct ath_hal *ah, int enable) {
-- if (enable)
-- ath_hal_set_ofdm_weak_det(ah,
-- AR5K_PHY_WEAK_OFDM_LOW_M1_ON,
-- AR5K_PHY_WEAK_OFDM_LOW_M2_ON,
-- AR5K_PHY_WEAK_OFDM_LOW_M2_COUNT_ON,
-- AR5K_PHY_WEAK_OFDM_LOW_SELFCOR_ON,
-- AR5K_PHY_WEAK_OFDM_HIGH_M1_ON,
-- AR5K_PHY_WEAK_OFDM_HIGH_M2_ON,
-- AR5K_PHY_WEAK_OFDM_HIGH_M2_COUNT_ON);
-- else
-- ath_hal_set_ofdm_weak_det(ah,
-- AR5K_PHY_WEAK_OFDM_LOW_M1_OFF,
-- AR5K_PHY_WEAK_OFDM_LOW_M2_OFF,
-- AR5K_PHY_WEAK_OFDM_LOW_M2_COUNT_OFF,
-- AR5K_PHY_WEAK_OFDM_LOW_SELFCOR_OFF,
-- AR5K_PHY_WEAK_OFDM_HIGH_M1_OFF,
-- AR5K_PHY_WEAK_OFDM_HIGH_M2_OFF,
-- AR5K_PHY_WEAK_OFDM_HIGH_M2_COUNT_OFF);
--}
--
--static inline void ath_hal_enable_cck_weak_det(struct ath_hal *ah, int enable) {
-- ath_hal_set_cck_weak_det(ah, enable
-- ? AR5K_PHY_WEAK_CCK_THRESH_ON
-- : AR5K_PHY_WEAK_CCK_THRESH_OFF);
--}
--
--static inline void ath_hal_restore_default_ofdm_weak_det(struct ath_hal *ah) {
-- ath_hal_enable_ofdm_weak_det(ah, DEFAULT_ENABLE_AR5K_PHY_WEAK_OFDM);
--}
--
--static inline void ath_hal_restore_default_cck_weak_det(struct ath_hal *ah) {
-- ath_hal_enable_cck_weak_det(ah, DEFAULT_ENABLE_AR5K_PHY_WEAK_CCK);
--}
--
--static inline void ath_hal_restore_default_sig_firstep(struct ath_hal *ah) {
--
-- ath_hal_set_sig_firstep(ah,
-- DEFAULT_AR5K_PHY_SIG_FIRSTEP);
--}
--
--static inline void ath_hal_restore_default_spur_immunity(struct ath_hal *ah) {
--
-- ath_hal_set_spur_immunity(ah,
-- DEFAULT_AR5K_PHY_SPUR_THRESH);
--}
--
--static inline void ath_hal_restore_default_intmit(struct ath_hal *ah) {
-- ath_hal_restore_default_noise_immunity(ah);
-- ath_hal_restore_default_ofdm_weak_det(ah);
-- ath_hal_restore_default_cck_weak_det(ah);
-- ath_hal_restore_default_sig_firstep(ah);
-- ath_hal_restore_default_spur_immunity(ah);
--
--}
--
--static inline void ath_hal_verify_default_intmit(struct ath_hal *ah) {
-- /* Just a list of all the fields above, for sanity checks... */
-- VERIFICATION_WARNING(ah, AR5K_PHY_AGCSIZE, AR5K_PHY_AGCSIZE_DESIRED, 1);
-- VERIFICATION_WARNING(ah, AR5K_PHY_AGCCOARSE, AR5K_PHY_AGCCOARSE_LO, 1);
-- VERIFICATION_WARNING(ah, AR5K_PHY_AGCCOARSE, AR5K_PHY_AGCCOARSE_HI, 1);
-- VERIFICATION_WARNING(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRPWR, 1);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M1, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M2, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_M2_COUNT, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_LOW, AR5K_PHY_WEAK_OFDM_LOW_SELFCOR, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M1, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M2, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_OFDM_HIGH, AR5K_PHY_WEAK_OFDM_HIGH_M2_COUNT, 0);
-- VERIFICATION_WARNING_SW(ah, AR5K_PHY_WEAK_CCK, AR5K_PHY_WEAK_CCK_THRESH, 0);
-- VERIFICATION_WARNING(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRSTEP, 0);
-- VERIFICATION_WARNING(ah, AR5K_PHY_SPUR, AR5K_PHY_SPUR_THRESH, 0);
--}
-+int ath_set_ack_bitrate(struct ath_softc *sc, int);
-+int ar_device(int devid);
-+const char * ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val);
-
- static inline void ath_hal_set_dmasize_pcie(struct ath_hal *ah) {
- SET_FIELD(ah, AR5K_TXCFG, AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
---- a/ath/if_ath_hal.h
-+++ b/ath/if_ath_hal.h
-@@ -79,7 +79,7 @@
- ath_hal_set_function(__func__);
- ath_hal_set_device(SC_DEV_NAME(ah->ah_sc));
- ret =
-- ah->ah_getDiagState(ah, request, args, argsize, *result,
-+ ah->ah_getDiagState(ah, request, args, argsize, result,
- resultsize);
- ath_hal_set_function(NULL);
- ath_hal_set_device(NULL);
---- a/scripts/if_ath_hal_generator.pl
-+++ b/scripts/if_ath_hal_generator.pl
-@@ -145,7 +145,9 @@
- "ah_waitForBeaconDone" => "ath_hal_waitforbeacon",
- "ah_writeAssocid" => "ath_hal_setassocid",
- "ah_clrMulticastFilterIndex" => "ath_hal_clearmcastfilter",
-- "ah_detectCardPresent" => "ath_hal_detectcardpresent"
-+ "ah_detectCardPresent" => "ath_hal_detectcardpresent",
-+ "ah_setSifsTime" => "ath_hal_setsifstime",
-+ "ah_getSifsTime" => "ath_hal_getsifstime"
- );
-
- #
-@@ -254,7 +256,7 @@
-
- foreach (@parameters) {
- s/ \*/\* /;
-- /^((?:(?:const|struct|\*)\s*)*)([^\s]+\*?)\s*([^\s]*)\s*/;
-+ /^((?:(?:const|struct|\*)\s*)*)([^\s]+\**)\s*([^\s]*)\s*/;
- my $type = "$1$2";
- my $name = "$3";
- if ( 0 == length($name) ) {
projects / openwrt.git / blobdiff