ixp4xx: fix weird ethernet issues with some devices caused by the ethernet packet...

[openwrt.git] / README

diff --git a/README b/README
index d718e59..43d6160 100644 (file)
--- a/README
+++ b/README
@@ -1,29 +1,26 @@
-This is the buildsystem for the OpenWrt Linux Distribution
-It is a modified uClibc buildroot2.
+This is the buildsystem for the OpenWrt Linux distribution

 
 Please use "make menuconfig" to configure your appreciated
 configuration for the toolchain and firmware.
 
 
 Please use "make menuconfig" to configure your appreciated
 configuration for the toolchain and firmware.
 

-Simply running 'make' will build your firmware and a tarball
-of kernel modules. It will download all sources, build the 
-cross-compile toolchain, the kernel and all choosen applications.
+You need to have installed gcc, binutils, patch, bzip2, flex, bison,
+make, gettext, pkg-config, unzip, libz-dev and libc headers.

 
 

-You can use flash.sh for remotely updating your embedded system
-via tftp.
+Simply running 'make' will build your firmware.
+It will download all sources, build the cross-compile toolchain, 
+the kernel and all choosen applications.

 
 

+You can use scripts/flashing/flash.sh for remotely updating your embedded
+system via tftp.

 
 

-There are some cleanup targets we would like to explain.
-"make clean" will only clean the firmware images and the root
-filesystem. "make dirclean" will remove the extracted kernel source
-and all exctracted software. (busybox,bridge-utils,..), but will
-preserve your toolchain. (compiler,linker,..)
-"make distclean" will remove everything, including the toolchain, 
-all downloaded source code archives and your firmware configuration. 
-You can cleanup separate directories by using "make application-dirclean" 
-and rebuild the firmware with "make".
+The OpenWrt system is documented in docs/. You will need a LaTeX distribution
+and the tex4ht package to build the documentation. Type make -C docs/ to build it.

 
 

-Be happy..
-       Your OpenWRT Project
-       http://www.openwrt.org
+Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
+Cygwin will not be supported because of the lack of case sensitiveness.
+
+Sunshine!
+       Your OpenWrt Project
+       http://openwrt.org