-diff -Naur linux-2.6.19.orig/arch/arm/mach-ixp4xx/common.c linux-2.6.19/arch/arm/mach-ixp4xx/common.c
---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/common.c 2006-11-29 14:57:37.000000000 -0700
-+++ linux-2.6.19/arch/arm/mach-ixp4xx/common.c 2007-01-12 21:54:40.000000000 -0700
-@@ -314,6 +314,90 @@
- &ixp46x_i2c_controller
- };
-
-+static struct npe_plat_data npea = {
-+ .name = "NPE-A",
-+ .data_size = 0x800,
-+ .inst_size = 0x1000,
-+ .id = 0,
-+};
-+
-+static struct npe_plat_data npeb = {
-+ .name = "NPE-B",
-+ .data_size = 0x800,
-+ .inst_size = 0x800,
-+ .id = 1,
-+};
-+
-+static struct npe_plat_data npec = {
-+ .name = "NPE-C",
-+ .data_size = 0x800,
-+ .inst_size = 0x800,
-+ .id = 2,
-+};
-+
-+static struct resource res_npea = {
-+ .start = IXP4XX_NPEA_BASE_PHYS,
-+ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_npeb = {
-+ .start = IXP4XX_NPEB_BASE_PHYS,
-+ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_npec = {
-+ .start = IXP4XX_NPEC_BASE_PHYS,
-+ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device dev_npea = {
-+ .name = "ixp4xx_npe",
-+ .id = 0,
-+ .dev.platform_data = &npea,
-+ .num_resources = 1,
-+ .resource = &res_npea,
-+};
-+
-+static struct platform_device dev_npeb = {
-+ .name = "ixp4xx_npe",
-+ .id = 1,
-+ .dev.platform_data = &npeb,
-+ .num_resources = 1,
-+ .resource = &res_npeb,
-+};
-+
-+static struct platform_device dev_npec = {
-+ .name = "ixp4xx_npe",
-+ .id = 2,
-+ .dev.platform_data = &npec,
-+ .num_resources = 1,
-+ .resource = &res_npec,
-+};
-+
-+/* QMGR */
-+static struct resource res_qmgr[] = {
-+{
-+ .start = IXP4XX_QMGR_BASE_PHYS,
-+ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+}, {
-+ .start = IRQ_IXP4XX_QM1,
-+ .flags = IORESOURCE_IRQ,
-+} };
-+
-+static struct platform_device qmgr = {
-+ .name = "ixp4xx_qmgr",
-+ .id = 0,
-+ .dev = {
-+ .coherent_dma_mask = DMA_32BIT_MASK,
-+ },
-+ .num_resources = ARRAY_SIZE(res_qmgr),
-+ .resource = res_qmgr,
-+};
-+
- unsigned long ixp4xx_exp_bus_size;
- EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-@@ -333,8 +417,19 @@
- break;
- }
- }
-+ npeb.inst_size = 0x1000;
-+ npec.inst_size = 0x1000;
- }
-
-+ platform_device_register(&qmgr);
-+
-+ if (ix_fuse() & IX_FUSE_NPEA)
-+ platform_device_register(&dev_npea);
-+ if (ix_fuse() & IX_FUSE_NPEB)
-+ platform_device_register(&dev_npeb);
-+ if (ix_fuse() & IX_FUSE_NPEC)
-+ platform_device_register(&dev_npec);
-+
- printk("IXP4xx: Using %luMiB expansion bus window size\n",
- ixp4xx_exp_bus_size >> 20);
- }
-diff -Naur linux-2.6.19.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c linux-2.6.19/arch/arm/mach-ixp4xx/ixdp425-setup.c
---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c 2006-11-29 14:57:37.000000000 -0700
-+++ linux-2.6.19/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-01-12 21:54:40.000000000 -0700
-@@ -101,10 +101,59 @@
- .resource = ixdp425_uart_resources
- };
-
-+/* MACs */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_controller,
- &ixdp425_flash,
-- &ixdp425_uart
-+ &ixdp425_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init ixdp425_init(void)
-diff -Naur linux-2.6.19.orig/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.6.19/Documentation/networking/ixp4xx/IxNpeMicrocode.h
---- linux-2.6.19.orig/Documentation/networking/ixp4xx/IxNpeMicrocode.h 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2007-01-12 21:54:40.000000000 -0700
+diff --git a/Documentation/networking/ixp4xx/IxNpeMicrocode.h b/Documentation/networking/ixp4xx/IxNpeMicrocode.h
+new file mode 100644
+index 0000000..e5a4bd3
+Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,143 @@
+/*
+ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file
+ close(fd);
+ return 0;
+}
-diff -Naur linux-2.6.19.orig/Documentation/networking/ixp4xx/mc_grab.c linux-2.6.19/Documentation/networking/ixp4xx/mc_grab.c
---- linux-2.6.19.orig/Documentation/networking/ixp4xx/mc_grab.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/Documentation/networking/ixp4xx/mc_grab.c 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,62 @@
++Informations about the Networking Driver using the IXP4XX CPU internal NPEs
++and Queue manager.
++
++If this driver is used, the IAL (Intel Access Library) must not be loaded.
++However, the IAL may be loaded, if this Modules are unloaded:
++ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
++
++This also means that HW crypto accelleration does NOT work when using this
++driver, unless I have finished my crypto driver for NPE-C
++
++
++Adoption to your custom board:
++------------------------------
++use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
++
++in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
++(Ask your hardware designer about the PHY id)
++
++The order of "&mac0" and "&mac1" in the "struct platform_device"
++determines which of them becomes eth0 and eth1
++
++
++The Microcode:
++---------------
++Solution 1)
++ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
++ IXP4XX_NPE as module.
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
++
++ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
++ to avoid unnessecary calls:
++ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
++
++Solution 2)
++ create a char-dev: "mknod /dev/misc/npe c 10 184"
++ cat the Microcode into it:
++ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe
++ This also works if the driver is linked to the kernel
++
++ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
++ is perfectly ok and works.
++
++ The state of the NPEs can be seen and changed at:
++ /sys/bus/platform/devices/ixp4xx_npe.X/state
++
++
++Obtaining the Microcode:
++------------------------
++1) IxNpeMicrocode.h in this directory:
++ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
++ It unpacks the Microcode IxNpeMicrocode.c
++ Read the Licence !
++ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
++ The resulting images can be moved to "/usr/lib/hotplug/firmware"
++
++2) mc_grab.c in this directory:
++ Compile and execute it either on the host or on the target
++ to grab the microcode from a binary image like the RedBoot bootloader.
++
++
+Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,97 @@
+/*
+ * mc_grab.c - grabs IXP4XX microcode from a binary datastream
+ fprintf(stderr, "Error reading Microcode\n");
+ return ret;
+}
-diff -Naur linux-2.6.19.orig/Documentation/networking/ixp4xx/README linux-2.6.19/Documentation/networking/ixp4xx/README
---- linux-2.6.19.orig/Documentation/networking/ixp4xx/README 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/Documentation/networking/ixp4xx/README 2007-01-12 21:54:40.000000000 -0700
-@@ -0,0 +1,62 @@
-+Informations about the Networking Driver using the IXP4XX CPU internal NPEs
-+and Queue manager.
+Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:35.000000000 -0800
+@@ -357,6 +357,90 @@
+ &ixp46x_i2c_controller
+ };
+
++static struct npe_plat_data npea = {
++ .name = "NPE-A",
++ .data_size = 0x800,
++ .inst_size = 0x1000,
++ .id = 0,
++};
+
-+If this driver is used, the IAL (Intel Access Library) must not be loaded.
-+However, the IAL may be loaded, if this Modules are unloaded:
-+ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
++static struct npe_plat_data npeb = {
++ .name = "NPE-B",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 1,
++};
+
-+This also means that HW crypto accelleration does NOT work when using this
-+driver, unless I have finished my crypto driver for NPE-C
++static struct npe_plat_data npec = {
++ .name = "NPE-C",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 2,
++};
+
++static struct resource res_npea = {
++ .start = IXP4XX_NPEA_BASE_PHYS,
++ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
+
-+Adoption to your custom board:
-+------------------------------
-+use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
++static struct resource res_npeb = {
++ .start = IXP4XX_NPEB_BASE_PHYS,
++ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
+
-+in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
-+(Ask your hardware designer about the PHY id)
++static struct resource res_npec = {
++ .start = IXP4XX_NPEC_BASE_PHYS,
++ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
+
-+The order of "&mac0" and "&mac1" in the "struct platform_device"
-+determines which of them becomes eth0 and eth1
++static struct platform_device dev_npea = {
++ .name = "ixp4xx_npe",
++ .id = 0,
++ .dev.platform_data = &npea,
++ .num_resources = 1,
++ .resource = &res_npea,
++};
+
++static struct platform_device dev_npeb = {
++ .name = "ixp4xx_npe",
++ .id = 1,
++ .dev.platform_data = &npeb,
++ .num_resources = 1,
++ .resource = &res_npeb,
++};
+
-+The Microcode:
-+---------------
-+Solution 1)
-+ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
-+ IXP4XX_NPE as module.
-+ The default hotplug script will load the Firmware from
-+ /usr/lib/hotplug/firmware/NPE-[ABC]
-+ see Documentation/firmware_class/hotplug-script
++static struct platform_device dev_npec = {
++ .name = "ixp4xx_npe",
++ .id = 2,
++ .dev.platform_data = &npec,
++ .num_resources = 1,
++ .resource = &res_npec,
++};
+
-+ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
-+ to avoid unnessecary calls:
-+ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
++/* QMGR */
++static struct resource res_qmgr[] = {
++{
++ .start = IXP4XX_QMGR_BASE_PHYS,
++ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
++ .flags = IORESOURCE_MEM,
++}, {
++ .start = IRQ_IXP4XX_QM1,
++ .flags = IORESOURCE_IRQ,
++} };
+
-+Solution 2)
-+ create a char-dev: "mknod /dev/misc/npe c 10 184"
-+ cat the Microcode into it:
-+ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe
-+ This also works if the driver is linked to the kernel
++static struct platform_device qmgr = {
++ .name = "ixp4xx_qmgr",
++ .id = 0,
++ .dev = {
++ .coherent_dma_mask = DMA_32BIT_MASK,
++ },
++ .num_resources = ARRAY_SIZE(res_qmgr),
++ .resource = res_qmgr,
++};
+
-+ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
-+ is perfectly ok and works.
+ unsigned long ixp4xx_exp_bus_size;
+ EXPORT_SYMBOL(ixp4xx_exp_bus_size);
+
+@@ -378,8 +462,19 @@
+ break;
+ }
+ }
++ npeb.inst_size = 0x1000;
++ npec.inst_size = 0x1000;
+ }
+
++ platform_device_register(&qmgr);
+
-+ The state of the NPEs can be seen and changed at:
-+ /sys/bus/platform/devices/ixp4xx_npe.X/state
++ if (ix_fuse() & IX_FUSE_NPEA)
++ platform_device_register(&dev_npea);
++ if (ix_fuse() & IX_FUSE_NPEB)
++ platform_device_register(&dev_npeb);
++ if (ix_fuse() & IX_FUSE_NPEC)
++ platform_device_register(&dev_npec);
+
+ printk("IXP4xx: Using %luMiB expansion bus window size\n",
+ ixp4xx_exp_bus_size >> 20);
+ }
+Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:35.000000000 -0800
+@@ -101,10 +101,59 @@
+ .resource = ixdp425_uart_resources
+ };
+
++/* MACs */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
+
-+Obtaining the Microcode:
-+------------------------
-+1) IxNpeMicrocode.h in this directory:
-+ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
-+ It unpacks the Microcode IxNpeMicrocode.c
-+ Read the Licence !
-+ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
-+ The resulting images can be moved to "/usr/lib/hotplug/firmware"
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
+
-+2) mc_grab.c in this directory:
-+ Compile and execute it either on the host or on the target
-+ to grab the microcode from a binary image like the RedBoot bootloader.
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++ .rxdoneq_id = 4,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++ .rxdoneq_id = 5,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *ixdp425_devices[] __initdata = {
+ &ixdp425_i2c_controller,
+ &ixdp425_flash,
+- &ixdp425_uart
++ &ixdp425_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init ixdp425_init(void)
+Index: linux-2.6.21-rc1-arm/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/drivers/net/Kconfig 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/drivers/net/Kconfig 2007-02-21 02:24:35.000000000 -0800
+@@ -201,6 +201,8 @@
+
+ source "drivers/net/arm/Kconfig"
+
++source "drivers/net/ixp4xx/Kconfig"
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
+Index: linux-2.6.21-rc1-arm/drivers/net/Makefile
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/drivers/net/Makefile 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/drivers/net/Makefile 2007-02-21 02:24:35.000000000 -0800
+@@ -212,6 +212,7 @@
+ obj-$(CONFIG_IRDA) += irda/
+ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+ obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
+
+ obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,48 @@
++config IXP4XX_QMGR
++ tristate "IXP4xx Queue Manager support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX Queue manager is a configurable hardware ringbuffer.
++ It is used by the NPEs to exchange data from and to the CPU.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_NPE
++ tristate "IXP4xx NPE support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX NPE driver supports the 3 CPU co-processors called
++ "Network Processing Engines" (NPE). It adds support fo downloading
++ the Microcode (firmware) via Hotplug or character-special-device.
++ More about this at: Documentation/networking/ixp4xx/README.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_FW_LOAD
++ bool "Use Firmware hotplug for Microcode download"
++ depends on IXP4XX_NPE
++ select HOTPLUG
++ select FW_LOADER
++ help
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
++
++config IXP4XX_MAC
++ tristate "IXP4xx MAC support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ depends on NET_ETHERNET
++ select MII
++ help
++ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
++ There are 2 on ixp425 and up to 5 on ixdp465.
++ You can either use this OR the Intel Access Library (IAL)
+
++config IXP4XX_CRYPTO
++ tristate "IXP4xx crypto support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ help
++ This driver is a generic NPE-crypto access layer.
++ You need additional code in OCF for example.
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,7 @@
++obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
++obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
++obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
+
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_crypto.c linux-2.6.19/drivers/net/ixp4xx/ixp4xx_crypto.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_crypto.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/ixp4xx_crypto.c 2007-01-12 21:54:40.000000000 -0700
++ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o
++ixp4xx_mac-objs := mac_driver.o phy.o
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,851 @@
+/*
+ * ixp4xx_crypto.c - interface to the HW crypto
+module_init(init_crypto);
+module_exit(finish_crypto);
+
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.19/drivers/net/ixp4xx/ixp4xx_qmgr.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/ixp4xx_qmgr.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/ixp4xx_qmgr.c 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,474 @@
+/*
+ * qmgr.c - reimplementation of the queue configuration interface.
+EXPORT_SYMBOL(queue_set_irq_src);
+EXPORT_SYMBOL(queue_set_watermarks);
+EXPORT_SYMBOL(queue_len);
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig linux-2.6.19/drivers/net/ixp4xx/Kconfig
---- linux-2.6.19.orig/drivers/net/ixp4xx/Kconfig 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/Kconfig 2007-01-12 21:54:40.000000000 -0700
-@@ -0,0 +1,48 @@
-+config IXP4XX_QMGR
-+ tristate "IXP4xx Queue Manager support"
-+ depends on ARCH_IXP4XX
-+ depends on NET_ETHERNET
-+ help
-+ The IXP4XX Queue manager is a configurable hardware ringbuffer.
-+ It is used by the NPEs to exchange data from and to the CPU.
-+ You can either use this OR the Intel Access Library (IAL)
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h 2007-02-21 02:24:35.000000000 -0800
+@@ -0,0 +1,275 @@
++/*
++ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
+
-+config IXP4XX_NPE
-+ tristate "IXP4xx NPE support"
-+ depends on ARCH_IXP4XX
-+ depends on NET_ETHERNET
-+ help
-+ The IXP4XX NPE driver supports the 3 CPU co-processors called
-+ "Network Processing Engines" (NPE). It adds support fo downloading
-+ the Microcode (firmware) via Hotplug or character-special-device.
-+ More about this at: Documentation/networking/ixp4xx/README.
-+ You can either use this OR the Intel Access Library (IAL)
++#include <linux/resource.h>
++#include <linux/netdevice.h>
++#include <linux/io.h>
++#include <linux/mii.h>
++#include <linux/workqueue.h>
++#include <asm/hardware.h>
++#include <linux/ixp_qmgr.h>
+
-+config IXP4XX_FW_LOAD
-+ bool "Use Firmware hotplug for Microcode download"
-+ depends on IXP4XX_NPE
-+ select HOTPLUG
-+ select FW_LOADER
-+ help
-+ The default hotplug script will load the Firmware from
-+ /usr/lib/hotplug/firmware/NPE-[ABC]
-+ see Documentation/firmware_class/hotplug-script
++/* 32 bit offsets to be added to u32 *pointers */
++#define MAC_TX_CNTRL1 0x00 // 0x000
++#define MAC_TX_CNTRL2 0x01 // 0x004
++#define MAC_RX_CNTRL1 0x04 // 0x010
++#define MAC_RX_CNTRL2 0x05 // 0x014
++#define MAC_RANDOM_SEED 0x08 // 0x020
++#define MAC_THRESH_P_EMPTY 0x0c // 0x030
++#define MAC_THRESH_P_FULL 0x0e // 0x038
++#define MAC_BUF_SIZE_TX 0x10 // 0x040
++#define MAC_TX_DEFER 0x14 // 0x050
++#define MAC_RX_DEFER 0x15 // 0x054
++#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
++#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
++#define MAC_SLOT_TIME 0x1c // 0x070
++#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
++#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
++#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
++#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
++#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
++#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
++#define MAC_CORE_CNTRL 0x7f // 0x1fC
+
-+config IXP4XX_MAC
-+ tristate "IXP4xx MAC support"
-+ depends on IXP4XX_NPE
-+ depends on IXP4XX_QMGR
-+ depends on NET_ETHERNET
-+ select MII
-+ help
-+ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
-+ There are 2 on ixp425 and up to 5 on ixdp465.
-+ You can either use this OR the Intel Access Library (IAL)
++/* TX Control Register 1*/
++
++#define TX_CNTRL1_TX_EN BIT(0)
++#define TX_CNTRL1_DUPLEX BIT(1)
++#define TX_CNTRL1_RETRY BIT(2)
++#define TX_CNTRL1_PAD_EN BIT(3)
++#define TX_CNTRL1_FCS_EN BIT(4)
++#define TX_CNTRL1_2DEFER BIT(5)
++#define TX_CNTRL1_RMII BIT(6)
++
++/* TX Control Register 2 */
++#define TX_CNTRL2_RETRIES_MASK 0xf
++
++/* RX Control Register 1 */
++#define RX_CNTRL1_RX_EN BIT(0)
++#define RX_CNTRL1_PADSTRIP_EN BIT(1)
++#define RX_CNTRL1_CRC_EN BIT(2)
++#define RX_CNTRL1_PAUSE_EN BIT(3)
++#define RX_CNTRL1_LOOP_EN BIT(4)
++#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
++#define RX_CNTRL1_RX_RUNT_EN BIT(6)
++#define RX_CNTRL1_BCAST_DIS BIT(7)
++
++/* RX Control Register 2 */
++#define RX_CNTRL2_DEFER_EN BIT(0)
++
++/* Core Control Register */
++#define CORE_RESET BIT(0)
++#define CORE_RX_FIFO_FLUSH BIT(1)
++#define CORE_TX_FIFO_FLUSH BIT(2)
++#define CORE_SEND_JAM BIT(3)
++#define CORE_MDC_EN BIT(4)
++
++/* Definitions for MII access routines*/
++
++#define MII_REG_SHL 16
++#define MII_ADDR_SHL 21
++
++#define MII_GO BIT(31)
++#define MII_WRITE BIT(26)
++#define MII_READ_FAIL BIT(31)
++
++#define MII_TIMEOUT_10TH_SECS 5
++#define MII_10TH_SEC_IN_MILLIS 100
++
++/*
++ *
++ * Default values
++ *
++ */
++
++#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
++
++#define MAC_TX_CNTRL1_DEFAULT (\
++ TX_CNTRL1_TX_EN | \
++ TX_CNTRL1_RETRY | \
++ TX_CNTRL1_FCS_EN | \
++ TX_CNTRL1_2DEFER | \
++ TX_CNTRL1_PAD_EN )
++
++#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
++
++#define MAC_RX_CNTRL1_DEFAULT ( \
++ RX_CNTRL1_PADSTRIP_EN | \
++ RX_CNTRL1_CRC_EN | \
++ RX_CNTRL1_RX_EN )
++
++#define MAC_RX_CNTRL2_DEFAULT 0x0
++#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
++
++/* Thresholds determined by NPE firmware FS */
++#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
++#define MAC_THRESH_P_FULL_DEFAULT 0x30
++
++/* Number of bytes that must be in the tx fifo before
++ * transmission commences */
++#define MAC_BUF_SIZE_TX_DEFAULT 0x8
++
++/* One-part deferral values */
++#define MAC_TX_DEFER_DEFAULT 0x15
++#define MAC_RX_DEFER_DEFAULT 0x16
++
++/* Two-part deferral values... */
++#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
++#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
++
++/* This value applies to MII */
++#define MAC_SLOT_TIME_DEFAULT 0x80
++
++/* This value applies to RMII */
++#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
++
++#define MAC_ADDR_MASK_DEFAULT 0xFF
++
++#define MAC_INT_CLK_THRESH_DEFAULT 0x1
++/* The following is a value chosen at random */
++#define MAC_RANDOM_SEED_DEFAULT 0x8
++
++/* By default we must configure the MAC to generate the MDC clock*/
++#define CORE_DEFAULT (CORE_MDC_EN)
++
++/* End of Intel provided register information */
++
++extern int
++mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
++extern void
++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
++extern void init_mdio(struct net_device *dev, int phy_id);
++
++struct mac_info {
++ u32 __iomem *addr;
++ struct resource *res;
++ struct device *npe_dev;
++ struct net_device *netdev;
++ struct qm_qmgr *qmgr;
++ struct qm_queue *rxq;
++ struct qm_queue *txq;
++ struct qm_queue *rxdoneq;
++ u32 irqflags;
++ struct net_device_stats stat;
++ struct mii_if_info mii;
++ struct delayed_work mdio_thread;
++ int rxq_pkt;
++ int txq_pkt;
++ int unloading;
++ struct mac_plat_info *plat;
++ int npe_stat_num;
++ spinlock_t rx_lock;
++ u32 msg_enable;
++};
++
++static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
++{
++ *(mac->addr + offset) = val;
++}
++static inline u32 mac_read_reg(struct mac_info *mac, int offset)
++{
++ return *(mac->addr + offset);
++}
++static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
++}
++static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
++}
++
++static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
++{
++ int i;
++ for(i=0; i<4; i++) {
++ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
++ cmd >>=8;
++ }
++}
++
++#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
++#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
++static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
++{
++ int i;
++ u32 data = 0;
++ for(i=0; i<4; i++) {
++ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
++ }
++ return data;
++}
++
++static inline u32 mdio_cmd(int phy_addr, int phy_reg)
++{
++ return phy_addr << MII_ADDR_SHL |
++ phy_reg << MII_REG_SHL |
++ MII_GO;
++}
++
++#define MAC_REG_LIST { \
++ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
++ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
++ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
++ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
++ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
++ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
++ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
++ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
++ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
++ MAC_INT_CLK_THRESH, \
++ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
++ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
++ MAC_CORE_CNTRL \
++}
++
++#define NPE_STAT_NUM 34
++#define NPE_STAT_NUM_BASE 22
++#define NPE_Q_STAT_NUM 4
++
++#define NPE_Q_STAT_STRINGS \
++ {"RX ready to use queue len "}, \
++ {"RX received queue len "}, \
++ {"TX to be send queue len "}, \
++ {"TX done queue len "},
+
-+config IXP4XX_CRYPTO
-+ tristate "IXP4xx crypto support"
-+ depends on IXP4XX_NPE
-+ depends on IXP4XX_QMGR
-+ help
-+ This driver is a generic NPE-crypto access layer.
-+ You need additional code in OCF for example.
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c linux-2.6.19/drivers/net/ixp4xx/mac_driver.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/mac_driver.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/mac_driver.c 2007-01-12 21:54:40.000000000 -0700
-@@ -0,0 +1,849 @@
++#define NPE_STAT_STRINGS \
++ {"StatsAlignmentErrors "}, \
++ {"StatsFCSErrors "}, \
++ {"StatsInternalMacReceiveErrors "}, \
++ {"RxOverrunDiscards "}, \
++ {"RxLearnedEntryDiscards "}, \
++ {"RxLargeFramesDiscards "}, \
++ {"RxSTPBlockedDiscards "}, \
++ {"RxVLANTypeFilterDiscards "}, \
++ {"RxVLANIdFilterDiscards "}, \
++ {"RxInvalidSourceDiscards "}, \
++ {"RxBlackListDiscards "}, \
++ {"RxWhiteListDiscards "}, \
++ {"RxUnderflowEntryDiscards "}, \
++ {"StatsSingleCollisionFrames "}, \
++ {"StatsMultipleCollisionFrames "}, \
++ {"StatsDeferredTransmissions "}, \
++ {"StatsLateCollisions "}, \
++ {"StatsExcessiveCollsions "}, \
++ {"StatsInternalMacTransmitErrors"}, \
++ {"StatsCarrierSenseErrors "}, \
++ {"TxLargeFrameDiscards "}, \
++ {"TxVLANIdFilterDiscards "}, \
++\
++ {"RxValidFramesTotalOctets "}, \
++ {"RxUcastPkts "}, \
++ {"RxBcastPkts "}, \
++ {"RxMcastPkts "}, \
++ {"RxPkts64Octets "}, \
++ {"RxPkts65to127Octets "}, \
++ {"RxPkts128to255Octets "}, \
++ {"RxPkts256to511Octets "}, \
++ {"RxPkts512to1023Octets "}, \
++ {"RxPkts1024to1518Octets "}, \
++ {"RxInternalNPEReceiveErrors "}, \
++ {"TxInternalNPETransmitErrors "}
++
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c 2007-02-21 02:24:46.000000000 -0800
+@@ -0,0 +1,850 @@
+/*
+ * mac_driver.c - provide a network interface for each MAC
+ *
+ .get_ethtool_stats = ixmac_get_ethtool_stats,
+};
+
-+static void mac_mdio_thread(void *_data)
++static void mac_mdio_thread(struct work_struct *work)
+{
-+ struct net_device *dev = _data;
-+ struct mac_info *mac = netdev_priv(dev);
++ struct mac_info *mac = container_of(work, struct mac_info,
++ mdio_thread.work);
++ struct net_device *dev = mac->netdev;
+
+ media_check(dev, 0);
+ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
+
+ init_mdio(dev, plat->phy_id);
+
-+ INIT_WORK(&mac->mdio_thread, mac_mdio_thread, dev);
++ INIT_DELAYED_WORK(&mac->mdio_thread, mac_mdio_thread);
+
+ /* The place of the MAC address is very system dependent.
+ * Here we use a random one to be replaced by one of the
+ * We switch the MAC in loopback mode and send a pseudo packet
+ * that will be returned by the NPE in its last SKB.
+ * We will also try to isolate the PHY to keep the packets internal.
-+ */
-+
-+ if (mac->txq_pkt <2)
-+ mac->txq_pkt += init_buffer(tx_doneq, 5);
-+
-+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
-+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
-+ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
-+
-+ npe_mh_npe_loopback_mode(npe, mac->plat, 1);
-+ mdelay(200);
-+
-+ while (mac->rxq_pkt && loop++ < 2000 ) {
-+ phys = queue_get_entry(tx_doneq) & ~0xf;
-+ if (!phys)
-+ break;
-+ cont = dma_to_virt(queue->dev, phys);
-+ /* actually the packets should never leave the system,
-+ * but if they do, they shall contain 0s instead of
-+ * intresting random data....
-+ */
-+ memset(cont->data, 0, 64);
-+ cont->eth.pkt_len = 64;
-+ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE,
-+ DMA_TO_DEVICE);
-+ queue_put_entry(mac->txq, phys);
-+ if (queue_stat(mac->txq) == 2) { /* overflow */
-+ queue_put_entry(tx_doneq, phys);
-+ break;
-+ }
-+ mdelay(1);
-+ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq,
-+ mac->rxq_pkt);
-+ }
-+ npe_mh_npe_loopback_mode(npe, mac->plat, 0);
-+ }
-+ /* Flush MAC TX fifo to drain the bogus packages */
-+ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
-+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN);
-+ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN);
-+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
-+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
-+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
-+}
-+
-+static int mac_remove(struct platform_device *pdev)
-+{
-+ struct net_device* dev = platform_get_drvdata(pdev);
-+ struct mac_info *mac = netdev_priv(dev);
-+
-+ unregister_netdev(dev);
-+
-+ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
-+ if (mac->rxq_pkt)
-+ drain_npe(mac);
-+
-+ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt);
-+ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
-+
-+ if (mac->rxq_pkt || mac->txq_pkt)
-+ printk("Buffers lost in NPE: RX:%d, TX:%d\n",
-+ mac->rxq_pkt, mac->txq_pkt);
-+
-+ release_queue(mac->txq);
-+ release_queue(mac->rxq);
-+ release_queue(mac->rxdoneq);
-+
-+ flush_scheduled_work();
-+ return_npe_dev(mac->npe_dev);
-+
-+ iounmap(mac->addr);
-+ release_resource(mac->res);
-+ platform_set_drvdata(pdev, NULL);
-+ free_netdev(dev);
-+ return 0;
-+}
-+
-+static struct platform_driver ixp4xx_mac = {
-+ .driver.name = IXMAC_NAME,
-+ .probe = mac_probe,
-+ .remove = mac_remove,
-+};
-+
-+static int __init init_mac(void)
-+{
-+ /* The TX done Queue handles skbs sent out by the NPE */
-+ tx_doneq = request_queue(TX_DONE_QID, 128);
-+ if (IS_ERR(tx_doneq)) {
-+ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID);
-+ return -EBUSY;
-+ }
-+ return platform_driver_register(&ixp4xx_mac);
-+}
-+
-+static void __exit finish_mac(void)
-+{
-+ platform_driver_unregister(&ixp4xx_mac);
-+ if (tx_doneq) {
-+ release_queue(tx_doneq);
-+ }
-+}
-+
-+module_init(init_mac);
-+module_exit(finish_mac);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
-+
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/mac.h linux-2.6.19/drivers/net/ixp4xx/mac.h
---- linux-2.6.19.orig/drivers/net/ixp4xx/mac.h 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/mac.h 2007-01-12 21:54:40.000000000 -0700
-@@ -0,0 +1,275 @@
-+/*
-+ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/resource.h>
-+#include <linux/netdevice.h>
-+#include <linux/io.h>
-+#include <linux/mii.h>
-+#include <linux/workqueue.h>
-+#include <asm/hardware.h>
-+#include <linux/ixp_qmgr.h>
-+
-+/* 32 bit offsets to be added to u32 *pointers */
-+#define MAC_TX_CNTRL1 0x00 // 0x000
-+#define MAC_TX_CNTRL2 0x01 // 0x004
-+#define MAC_RX_CNTRL1 0x04 // 0x010
-+#define MAC_RX_CNTRL2 0x05 // 0x014
-+#define MAC_RANDOM_SEED 0x08 // 0x020
-+#define MAC_THRESH_P_EMPTY 0x0c // 0x030
-+#define MAC_THRESH_P_FULL 0x0e // 0x038
-+#define MAC_BUF_SIZE_TX 0x10 // 0x040
-+#define MAC_TX_DEFER 0x14 // 0x050
-+#define MAC_RX_DEFER 0x15 // 0x054
-+#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
-+#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
-+#define MAC_SLOT_TIME 0x1c // 0x070
-+#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
-+#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
-+#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
-+#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
-+#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
-+#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
-+#define MAC_CORE_CNTRL 0x7f // 0x1fC
-+
-+/* TX Control Register 1*/
-+
-+#define TX_CNTRL1_TX_EN BIT(0)
-+#define TX_CNTRL1_DUPLEX BIT(1)
-+#define TX_CNTRL1_RETRY BIT(2)
-+#define TX_CNTRL1_PAD_EN BIT(3)
-+#define TX_CNTRL1_FCS_EN BIT(4)
-+#define TX_CNTRL1_2DEFER BIT(5)
-+#define TX_CNTRL1_RMII BIT(6)
-+
-+/* TX Control Register 2 */
-+#define TX_CNTRL2_RETRIES_MASK 0xf
-+
-+/* RX Control Register 1 */
-+#define RX_CNTRL1_RX_EN BIT(0)
-+#define RX_CNTRL1_PADSTRIP_EN BIT(1)
-+#define RX_CNTRL1_CRC_EN BIT(2)
-+#define RX_CNTRL1_PAUSE_EN BIT(3)
-+#define RX_CNTRL1_LOOP_EN BIT(4)
-+#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
-+#define RX_CNTRL1_RX_RUNT_EN BIT(6)
-+#define RX_CNTRL1_BCAST_DIS BIT(7)
-+
-+/* RX Control Register 2 */
-+#define RX_CNTRL2_DEFER_EN BIT(0)
-+
-+/* Core Control Register */
-+#define CORE_RESET BIT(0)
-+#define CORE_RX_FIFO_FLUSH BIT(1)
-+#define CORE_TX_FIFO_FLUSH BIT(2)
-+#define CORE_SEND_JAM BIT(3)
-+#define CORE_MDC_EN BIT(4)
-+
-+/* Definitions for MII access routines*/
-+
-+#define MII_REG_SHL 16
-+#define MII_ADDR_SHL 21
-+
-+#define MII_GO BIT(31)
-+#define MII_WRITE BIT(26)
-+#define MII_READ_FAIL BIT(31)
-+
-+#define MII_TIMEOUT_10TH_SECS 5
-+#define MII_10TH_SEC_IN_MILLIS 100
-+
-+/*
-+ *
-+ * Default values
-+ *
-+ */
-+
-+#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
-+
-+#define MAC_TX_CNTRL1_DEFAULT (\
-+ TX_CNTRL1_TX_EN | \
-+ TX_CNTRL1_RETRY | \
-+ TX_CNTRL1_FCS_EN | \
-+ TX_CNTRL1_2DEFER | \
-+ TX_CNTRL1_PAD_EN )
-+
-+#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
-+
-+#define MAC_RX_CNTRL1_DEFAULT ( \
-+ RX_CNTRL1_PADSTRIP_EN | \
-+ RX_CNTRL1_CRC_EN | \
-+ RX_CNTRL1_RX_EN )
++ */
+
-+#define MAC_RX_CNTRL2_DEFAULT 0x0
-+#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
++ if (mac->txq_pkt <2)
++ mac->txq_pkt += init_buffer(tx_doneq, 5);
+
-+/* Thresholds determined by NPE firmware FS */
-+#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
-+#define MAC_THRESH_P_FULL_DEFAULT 0x30
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
+
-+/* Number of bytes that must be in the tx fifo before
-+ * transmission commences */
-+#define MAC_BUF_SIZE_TX_DEFAULT 0x8
++ npe_mh_npe_loopback_mode(npe, mac->plat, 1);
++ mdelay(200);
+
-+/* One-part deferral values */
-+#define MAC_TX_DEFER_DEFAULT 0x15
-+#define MAC_RX_DEFER_DEFAULT 0x16
++ while (mac->rxq_pkt && loop++ < 2000 ) {
++ phys = queue_get_entry(tx_doneq) & ~0xf;
++ if (!phys)
++ break;
++ cont = dma_to_virt(queue->dev, phys);
++ /* actually the packets should never leave the system,
++ * but if they do, they shall contain 0s instead of
++ * intresting random data....
++ */
++ memset(cont->data, 0, 64);
++ cont->eth.pkt_len = 64;
++ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE,
++ DMA_TO_DEVICE);
++ queue_put_entry(mac->txq, phys);
++ if (queue_stat(mac->txq) == 2) { /* overflow */
++ queue_put_entry(tx_doneq, phys);
++ break;
++ }
++ mdelay(1);
++ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq,
++ mac->rxq_pkt);
++ }
++ npe_mh_npe_loopback_mode(npe, mac->plat, 0);
++ }
++ /* Flush MAC TX fifo to drain the bogus packages */
++ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN);
++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN);
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++}
+
-+/* Two-part deferral values... */
-+#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
-+#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
++static int mac_remove(struct platform_device *pdev)
++{
++ struct net_device* dev = platform_get_drvdata(pdev);
++ struct mac_info *mac = netdev_priv(dev);
+
-+/* This value applies to MII */
-+#define MAC_SLOT_TIME_DEFAULT 0x80
++ unregister_netdev(dev);
+
-+/* This value applies to RMII */
-+#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
++ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
++ if (mac->rxq_pkt)
++ drain_npe(mac);
+
-+#define MAC_ADDR_MASK_DEFAULT 0xFF
++ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt);
++ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
+
-+#define MAC_INT_CLK_THRESH_DEFAULT 0x1
-+/* The following is a value chosen at random */
-+#define MAC_RANDOM_SEED_DEFAULT 0x8
++ if (mac->rxq_pkt || mac->txq_pkt)
++ printk("Buffers lost in NPE: RX:%d, TX:%d\n",
++ mac->rxq_pkt, mac->txq_pkt);
+
-+/* By default we must configure the MAC to generate the MDC clock*/
-+#define CORE_DEFAULT (CORE_MDC_EN)
++ release_queue(mac->txq);
++ release_queue(mac->rxq);
++ release_queue(mac->rxdoneq);
+
-+/* End of Intel provided register information */
++ flush_scheduled_work();
++ return_npe_dev(mac->npe_dev);
+
-+extern int
-+mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
-+extern void
-+mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
-+extern void init_mdio(struct net_device *dev, int phy_id);
++ iounmap(mac->addr);
++ release_resource(mac->res);
++ platform_set_drvdata(pdev, NULL);
++ free_netdev(dev);
++ return 0;
++}
+
-+struct mac_info {
-+ u32 __iomem *addr;
-+ struct resource *res;
-+ struct device *npe_dev;
-+ struct net_device *netdev;
-+ struct qm_qmgr *qmgr;
-+ struct qm_queue *rxq;
-+ struct qm_queue *txq;
-+ struct qm_queue *rxdoneq;
-+ u32 irqflags;
-+ struct net_device_stats stat;
-+ struct mii_if_info mii;
-+ struct work_struct mdio_thread;
-+ int rxq_pkt;
-+ int txq_pkt;
-+ int unloading;
-+ struct mac_plat_info *plat;
-+ int npe_stat_num;
-+ spinlock_t rx_lock;
-+ u32 msg_enable;
++static struct platform_driver ixp4xx_mac = {
++ .driver.name = IXMAC_NAME,
++ .probe = mac_probe,
++ .remove = mac_remove,
+};
+
-+static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
-+{
-+ *(mac->addr + offset) = val;
-+}
-+static inline u32 mac_read_reg(struct mac_info *mac, int offset)
-+{
-+ return *(mac->addr + offset);
-+}
-+static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
-+{
-+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
-+}
-+static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
-+{
-+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
-+}
-+
-+static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
++static int __init init_mac(void)
+{
-+ int i;
-+ for(i=0; i<4; i++) {
-+ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
-+ cmd >>=8;
++ /* The TX done Queue handles skbs sent out by the NPE */
++ tx_doneq = request_queue(TX_DONE_QID, 128);
++ if (IS_ERR(tx_doneq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID);
++ return -EBUSY;
+ }
++ return platform_driver_register(&ixp4xx_mac);
+}
+
-+#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
-+#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
-+static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
++static void __exit finish_mac(void)
+{
-+ int i;
-+ u32 data = 0;
-+ for(i=0; i<4; i++) {
-+ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
++ platform_driver_unregister(&ixp4xx_mac);
++ if (tx_doneq) {
++ release_queue(tx_doneq);
+ }
-+ return data;
-+}
-+
-+static inline u32 mdio_cmd(int phy_addr, int phy_reg)
-+{
-+ return phy_addr << MII_ADDR_SHL |
-+ phy_reg << MII_REG_SHL |
-+ MII_GO;
-+}
-+
-+#define MAC_REG_LIST { \
-+ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
-+ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
-+ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
-+ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
-+ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
-+ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
-+ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
-+ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
-+ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
-+ MAC_INT_CLK_THRESH, \
-+ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
-+ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
-+ MAC_CORE_CNTRL \
+}
+
-+#define NPE_STAT_NUM 34
-+#define NPE_STAT_NUM_BASE 22
-+#define NPE_Q_STAT_NUM 4
-+
-+#define NPE_Q_STAT_STRINGS \
-+ {"RX ready to use queue len "}, \
-+ {"RX received queue len "}, \
-+ {"TX to be send queue len "}, \
-+ {"TX done queue len "},
-+
-+#define NPE_STAT_STRINGS \
-+ {"StatsAlignmentErrors "}, \
-+ {"StatsFCSErrors "}, \
-+ {"StatsInternalMacReceiveErrors "}, \
-+ {"RxOverrunDiscards "}, \
-+ {"RxLearnedEntryDiscards "}, \
-+ {"RxLargeFramesDiscards "}, \
-+ {"RxSTPBlockedDiscards "}, \
-+ {"RxVLANTypeFilterDiscards "}, \
-+ {"RxVLANIdFilterDiscards "}, \
-+ {"RxInvalidSourceDiscards "}, \
-+ {"RxBlackListDiscards "}, \
-+ {"RxWhiteListDiscards "}, \
-+ {"RxUnderflowEntryDiscards "}, \
-+ {"StatsSingleCollisionFrames "}, \
-+ {"StatsMultipleCollisionFrames "}, \
-+ {"StatsDeferredTransmissions "}, \
-+ {"StatsLateCollisions "}, \
-+ {"StatsExcessiveCollsions "}, \
-+ {"StatsInternalMacTransmitErrors"}, \
-+ {"StatsCarrierSenseErrors "}, \
-+ {"TxLargeFrameDiscards "}, \
-+ {"TxVLANIdFilterDiscards "}, \
-+\
-+ {"RxValidFramesTotalOctets "}, \
-+ {"RxUcastPkts "}, \
-+ {"RxBcastPkts "}, \
-+ {"RxMcastPkts "}, \
-+ {"RxPkts64Octets "}, \
-+ {"RxPkts65to127Octets "}, \
-+ {"RxPkts128to255Octets "}, \
-+ {"RxPkts256to511Octets "}, \
-+ {"RxPkts512to1023Octets "}, \
-+ {"RxPkts1024to1518Octets "}, \
-+ {"RxInternalNPEReceiveErrors "}, \
-+ {"TxInternalNPETransmitErrors "}
++module_init(init_mac);
++module_exit(finish_mac);
+
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/Makefile linux-2.6.19/drivers/net/ixp4xx/Makefile
---- linux-2.6.19.orig/drivers/net/ixp4xx/Makefile 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/Makefile 2007-01-12 21:54:40.000000000 -0700
-@@ -0,0 +1,7 @@
-+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-+obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
-+obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
+
-+ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o
-+ixp4xx_mac-objs := mac_driver.o phy.o
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/npe.c linux-2.6.19/drivers/net/ixp4xx/npe.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/npe.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/npe.c 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,291 @@
+
+#include <linux/ixp_npe.h>
+EXPORT_SYMBOL(npe_stop);
+EXPORT_SYMBOL(npe_start);
+EXPORT_SYMBOL(npe_reset);
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/npe_mh.c linux-2.6.19/drivers/net/ixp4xx/npe_mh.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/npe_mh.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/npe_mh.c 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,170 @@
+/*
+ * npe_mh.c - NPE message handler.
+EXPORT_SYMBOL(npe_mh_set_rxqid);
+EXPORT_SYMBOL(npe_mh_npe_loopback_mode);
+EXPORT_SYMBOL(npe_mh_get_stats);
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/phy.c linux-2.6.19/drivers/net/ixp4xx/phy.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/phy.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/phy.c 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,113 @@
+/*
+ * phy.c - MDIO functions and mii initialisation
+ mac->mii.mdio_write = mdio_write_register;
+}
+
-diff -Naur linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c
---- linux-2.6.19.orig/drivers/net/ixp4xx/ucode_dl.c 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/drivers/net/ixp4xx/ucode_dl.c 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,479 @@
+/*
+ * ucode_dl.c - provide an NPE device and a char-dev for microcode download
+
+EXPORT_SYMBOL(get_npe_by_id);
+EXPORT_SYMBOL(return_npe_dev);
-diff -Naur linux-2.6.19.orig/drivers/net/Kconfig linux-2.6.19/drivers/net/Kconfig
---- linux-2.6.19.orig/drivers/net/Kconfig 2006-11-29 14:57:37.000000000 -0700
-+++ linux-2.6.19/drivers/net/Kconfig 2007-01-12 21:54:40.000000000 -0700
-@@ -190,6 +190,8 @@
-
- source "drivers/net/arm/Kconfig"
-
-+source "drivers/net/ixp4xx/Kconfig"
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
-diff -Naur linux-2.6.19.orig/drivers/net/Makefile linux-2.6.19/drivers/net/Makefile
---- linux-2.6.19.orig/drivers/net/Makefile 2006-11-29 14:57:37.000000000 -0700
-+++ linux-2.6.19/drivers/net/Makefile 2007-01-12 21:54:40.000000000 -0700
-@@ -209,6 +209,7 @@
- obj-$(CONFIG_IRDA) += irda/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
-
- obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-diff -Naur linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.19/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2006-11-29 14:57:37.000000000 -0700
-+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:35.000000000 -0800
@@ -22,6 +22,8 @@
#ifndef _ASM_ARM_IXP4XX_H_
#define _ASM_ARM_IXP4XX_H_
#endif
#endif
-diff -Naur linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/npe_regs.h linux-2.6.19/include/asm-arm/arch-ixp4xx/npe_regs.h
---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/npe_regs.h 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/npe_regs.h 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,82 @@
+#ifndef NPE_REGS_H
+#define NPE_REGS_H
+
+#endif
+
-diff -Naur linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h
---- linux-2.6.19.orig/include/asm-arm/arch-ixp4xx/platform.h 2006-11-29 14:57:37.000000000 -0700
-+++ linux-2.6.19/include/asm-arm/arch-ixp4xx/platform.h 2007-01-12 21:54:40.000000000 -0700
-@@ -89,6 +89,25 @@
-
- struct sys_timer;
+Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:18.000000000 -0800
++++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:35.000000000 -0800
+@@ -86,6 +86,25 @@
+ unsigned long scl_pin;
+ };
+struct npe_plat_data {
+ const char *name;
+};
+
/*
- * Frequency of clock used for primary clocksource
- */
-diff -Naur linux-2.6.19.orig/include/linux/ixp_crypto.h linux-2.6.19/include/linux/ixp_crypto.h
---- linux-2.6.19.orig/include/linux/ixp_crypto.h 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/include/linux/ixp_crypto.h 2007-01-12 21:54:40.000000000 -0700
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+Index: linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,192 @@
+
+#ifndef IX_CRYPTO_H
+ const struct ix_hash_algo *auth, int len);
+
+#endif
-diff -Naur linux-2.6.19.orig/include/linux/ixp_npe.h linux-2.6.19/include/linux/ixp_npe.h
---- linux-2.6.19.orig/include/linux/ixp_npe.h 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/include/linux/ixp_npe.h 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/include/linux/ixp_npe.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/ixp_npe.h 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
+npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, int reset);
+
+#endif
-diff -Naur linux-2.6.19.orig/include/linux/ixp_qmgr.h linux-2.6.19/include/linux/ixp_qmgr.h
---- linux-2.6.19.orig/include/linux/ixp_qmgr.h 1969-12-31 17:00:00.000000000 -0700
-+++ linux-2.6.19/include/linux/ixp_qmgr.h 2007-01-12 21:54:40.000000000 -0700
+Index: linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h 2007-02-21 02:24:35.000000000 -0800
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
projects / openwrt.git / blobdiff