+++ /dev/null
-diff -Nur linux-2.6.17/arch/arm/boot/compressed/head-xscale.S linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.17/arch/arm/boot/compressed/head-xscale.S 2006-09-11 12:29:51.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S 2006-09-11 12:30:03.000000000 +0200
-@@ -47,6 +47,11 @@
- orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
-
-+#ifdef CONFIG_MACH_GATEWAY7001
-+ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
-+ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_IXP2000
- mov r1, #-1
- mov r0, #0xd6000000
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-09-11 12:30:03.000000000 +0200
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
-+ *
-+ * PCI setup routines for Gateway 7001
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init gateway7001_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 0)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else return -1;
-+}
-+
-+struct hw_pci gateway7001_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = gateway7001_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = gateway7001_map_irq,
-+};
-+
-+int __init gateway7001_pci_init(void)
-+{
-+ if (machine_is_gateway7001())
-+ pci_common_init(&gateway7001_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(gateway7001_pci_init);
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig 2006-09-11 12:29:51.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-09-11 12:30:03.000000000 +0200
-@@ -33,6 +33,14 @@
- Engineering Coyote Gateway Reference Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_GATEWAY7001
-+ bool "Gateway 7001"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Gateway's
-+ 7001 Access Point. For more information on this platform,
-+ see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- select PCI
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Makefile linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.17/arch/arm/mach-ixp4xx/Makefile 2006-09-11 12:29:51.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile 2006-09-11 12:30:03.000000000 +0200
-@@ -11,4 +11,5 @@
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
-+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o coyote-setup.o
-
-diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h 2006-09-11 12:29:51.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-09-11 12:31:21.000000000 +0200
-@@ -38,9 +38,9 @@
- static __inline__ void __arch_decomp_setup(unsigned long arch_id)
- {
- /*
-- * Coyote and gtwx5715 only have UART2 connected
-+ * Some boards only have UART2 connected
- */
-- if (machine_is_adi_coyote() || machine_is_gtwx5715())
-+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c 2006-09-11 12:29:51.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-09-11 12:37:51.000000000 +0200
-@@ -1,9 +1,10 @@
- /*
- * arch/arm/mach-ixp4xx/coyote-setup.c
- *
-- * Board setup for ADI Engineering and IXDGP425 boards
-+ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-@@ -73,9 +74,57 @@
- .resource = &coyote_uart_resource,
- };
-
-+/* MACs */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &mac0,
-+ &mac1
- };
-
- static void __init coyote_init(void)
-@@ -111,6 +160,19 @@
- MACHINE_END
- #endif
-
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = coyote_init,
-+MACHINE_END
-+#endif
-+
- /*
- * IXDPG425 is identical to Coyote except for which serial port
- * is connected.
projects / openwrt.git / blobdiff