ath5k: add an upstream patch to fix a memory leak
[openwrt.git] / package / base-files / files / lib / network / config.sh
index a31e836..a194ab8 100755 (executable)
@@ -3,6 +3,12 @@
 
 # DEBUG="echo"
 
+do_sysctl() {
+       [ -n "$2" ] && \
+               sysctl -n -e -w "$1=$2" >/dev/null || \
+               sysctl -n -e "$1"
+}
+
 find_config() {
        local iftype device iface ifaces ifn
        for ifn in $interfaces; do
@@ -172,6 +178,7 @@ prepare_interface() {
                                        done
                                        uci_set_state network "$config" device "$newdevs"
                                        $DEBUG ifconfig "$iface" 0.0.0.0
+                                       $DEBUG do_sysctl "net.ipv6.conf.$iface.disable_ipv6" 1
                                        $DEBUG brctl addif "br-$config" "$iface"
                                        # Bridge existed already. No further processing necesary
                                } || {
@@ -179,10 +186,12 @@ prepare_interface() {
                                        config_get_bool stp "$config" stp 0
                                        $DEBUG brctl addbr "br-$config"
                                        $DEBUG brctl setfd "br-$config" 0
-                                       $DEBUG ifconfig "br-$config" up
                                        $DEBUG ifconfig "$iface" 0.0.0.0
+                                       $DEBUG do_sysctl "net.ipv6.conf.$iface.disable_ipv6" 1
                                        $DEBUG brctl addif "br-$config" "$iface"
                                        $DEBUG brctl stp "br-$config" $stp
+                                       [ -z "$macaddr" ] && macaddr="$(cat /sys/class/net/$iface/address)"
+                                       $DEBUG ifconfig "br-$config" hw ether $macaddr up
                                        # Creating the bridge here will have triggered a hotplug event, which will
                                        # result in another setup_interface() call, so we simply stop processing
                                        # the current event at this point.
@@ -219,16 +228,22 @@ setup_interface_static() {
        config_get ip6addr "$config" ip6addr
        [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
 
-       local gateway ip6gw dns bcast
+       local gateway ip6gw dns bcast metric
        config_get gateway "$config" gateway
        config_get ip6gw "$config" ip6gw
        config_get dns "$config" dns
        config_get bcast "$config" broadcast
+       config_get metric "$config" metric
+
+       case "$ip6addr" in
+               */*) ;;
+               *:*) ip6addr="$ip6addr/64" ;;
+       esac
 
        [ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
        [ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
-       [ -z "$gateway" ] || $DEBUG route add default gw "$gateway" dev "$iface"
-       [ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" dev "$iface"
+       [ -z "$gateway" ] || $DEBUG route add default gw "$gateway" ${metric:+metric $metric} dev "$iface"
+       [ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" ${metric:+metric $metric} dev "$iface"
        [ -z "$dns" ] || add_dns "$config" $dns
 
        config_get type "$config" TYPE
@@ -246,6 +261,25 @@ setup_interface_alias() {
        config_get cfg "$config" interface
        [ "$parent" == "$cfg" ] || return 0
 
+       # parent device and ifname
+       local p_device p_type
+       config_get p_device "$cfg" device
+       config_get p_type   "$cfg" type
+
+       # select alias ifname
+       local layer use_iface
+       config_get layer "$config" layer 2
+       case "$layer:$p_type" in
+               # layer 3: e.g. pppoe-wan or pptp-vpn
+               3:*)      use_iface="$iface" ;;
+
+               # layer 2 and parent is bridge: e.g. br-wan
+               2:bridge) use_iface="br-$cfg" ;;
+
+               # layer 1: e.g. eth0 or ath0
+               *)        use_iface="$p_device" ;;
+       esac
+
        # alias counter
        local ctr
        config_get ctr "$parent" alias_count 0
@@ -258,14 +292,14 @@ setup_interface_alias() {
        append list "$config"
        config_set "$parent" aliases "$list"
 
-       iface="$iface:$ctr"
-       set_interface_ifname "$config" "$iface"
+       use_iface="$use_iface:$ctr"
+       set_interface_ifname "$config" "$use_iface"
 
        local proto
        config_get proto "$config" proto "static"
        case "${proto}" in
                static)
-                       setup_interface_static "$iface" "$config"
+                       setup_interface_static "$use_iface" "$config"
                ;;
                *)
                        echo "Unsupported type '$proto' for alias config '$config'"
@@ -296,12 +330,13 @@ setup_interface() {
        }
 
        # Interface settings
-       grep "$iface:" /proc/net/dev > /dev/null && {
-               local mtu macaddr
+       grep -qE "^ *$iface:" /proc/net/dev && {
+               local mtu macaddr txqueuelen
                config_get mtu "$config" mtu
                config_get macaddr "$config" macaddr
+               config_get txqueuelen "$config" txqueuelen
                [ -n "$macaddr" ] && $DEBUG ifconfig "$iface" down
-               $DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
+               $DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} ${txqueuelen:+txqueuelen $txqueuelen} up
        }
        set_interface_ifname "$config" "$iface"
 
@@ -311,31 +346,40 @@ setup_interface() {
                        setup_interface_static "$iface" "$config"
                ;;
                dhcp)
-                       local lockfile="/var/lock/dhcp-$iface"
-                       lock "$lockfile"
-
-                       # prevent udhcpc from starting more than once
+                       # kill running udhcpc instance
                        local pidfile="/var/run/dhcp-${iface}.pid"
-                       local pid="$(cat "$pidfile" 2>/dev/null)"
-                       if [ -d "/proc/$pid" ] && grep -qs udhcpc "/proc/${pid}/cmdline"; then
-                               lock -u "$lockfile"
-                       else
-                               local ipaddr netmask hostname proto1 clientid
-                               config_get ipaddr "$config" ipaddr
-                               config_get netmask "$config" netmask
-                               config_get hostname "$config" hostname
-                               config_get proto1 "$config" proto
-                               config_get clientid "$config" clientid
-
-                               [ -z "$ipaddr" ] || \
-                                       $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
-
-                               # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
-                               local dhcpopts
-                               [ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
-                               $DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -O rootpath -R &}
-                               lock -u "$lockfile"
-                       fi
+                       service_kill udhcpc "$pidfile"
+
+                       local ipaddr netmask hostname proto1 clientid vendorid broadcast reqopts
+                       config_get ipaddr "$config" ipaddr
+                       config_get netmask "$config" netmask
+                       config_get hostname "$config" hostname
+                       config_get proto1 "$config" proto
+                       config_get clientid "$config" clientid
+                       config_get vendorid "$config" vendorid
+                       config_get_bool broadcast "$config" broadcast 0
+                       config_get reqopts "$config" reqopts
+
+                       [ -z "$ipaddr" ] || \
+                               $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
+
+                       # additional request options
+                       local opt dhcpopts
+                       for opt in $reqopts; do
+                               append dhcpopts "-O $opt"
+                       done
+
+                       # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+                       [ "$proto1" != "$proto" ] && append dhcpopts "-n -q" || append dhcpopts "-O rootpath -R &"
+                       [ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast=
+
+                       $DEBUG eval udhcpc -t 0 -i "$iface" \
+                               ${ipaddr:+-r $ipaddr} \
+                               ${hostname:+-H $hostname} \
+                               ${clientid:+-c $clientid} \
+                               ${vendorid:+-V $vendorid} \
+                               -b -p "$pidfile" $broadcast \
+                               ${dhcpopts}
                ;;
                none)
                        setup_interface_none "$iface" "$config"
@@ -363,12 +407,7 @@ stop_interface_dhcp() {
        remove_dns "$config"
 
        local pidfile="/var/run/dhcp-${ifname}.pid"
-       local pid="$(cat "$pidfile" 2>/dev/null)"
-       [ -d "/proc/$pid" ] && {
-               grep -qs udhcpc "/proc/$pid/cmdline" && kill -TERM $pid && \
-                       while grep -qs udhcpc "/proc/$pid/cmdline"; do sleep 1; done
-               rm -f "$pidfile"
-       }
+       service_kill udhcpc "$pidfile"
 
        uci -P /var/state revert "network.$config"
 }
@@ -383,6 +422,7 @@ unbridge() {
 
                for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
                        brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null
+                       do_sysctl "net.ipv6.conf.$dev.disable_ipv6" 0
                done
        }
 }
This page took 0.029136 seconds and 4 git commands to generate.