add a configuration option to enable full c99 math in libm. this is needed for funct...

[openwrt.git] / package / hostap / Makefile

diff --git a/package/hostap/Makefile b/package/hostap/Makefile
index 21abfe2..82e7475 100644 (file)
--- a/package/hostap/Makefile
+++ b/package/hostap/Makefile
@@ -1,63 +1,83 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#

 # $Id$
 
 include $(TOPDIR)/rules.mk
 # $Id$
 
 include $(TOPDIR)/rules.mk

-include $(TOPDIR)/include/kernel.mk
+include $(INCLUDE_DIR)/kernel.mk

 
 PKG_NAME:=hostap-driver
 PKG_VERSION:=0.4.9
 PKG_RELEASE:=1
 
 PKG_NAME:=hostap-driver
 PKG_VERSION:=0.4.9
 PKG_RELEASE:=1

-PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378

 
 

-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/

 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz

+PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
+PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378

 PKG_CAT:=zcat
 
 PKG_CAT:=zcat
 

+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)

 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 

-include $(TOPDIR)/include/package.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/kmod-hostap/Default
+  SECTION:=kernel
+  CATEGORY:=Kernel drivers
+  DESCRIPTION:=\
+       Host AP is a driver for 802.11b wireless cards based on Intersil \\\
+       Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
+       card to act as an IEEE 802.11 access point.
+  URL:=http://hostap.epitest.fi/
+  ifeq ($(KERNEL),2.6)
+    VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
+  else
+    VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+  endif
+endef

 
 define Package/kmod-hostap
 
 define Package/kmod-hostap

-SECTION:=drivers
-CATEGORY:=Drivers
-DEPENDS:=@LINUX_2_4_BRCM||LINUX_2_4_X86
-TITLE:=Host AP support for Prism2/2.5/3 IEEE 802.11b
-DESCRIPTION:=Host AP support for Prism2/2.5/3 IEEE 802.11b \\\
-A driver for 802.11b wireless cards based on Intersil Prism2/2.5/3 \\\
-chipset. This driver supports so called Host AP mode that allows the card \\\
-to act as an IEEE 802.11 access point. \\\
-\\\
-This option includes the base Host AP driver code that is shared by \\\
-different hardware models. You will also need to enable support for \\\
-PLX/PCI/CS version of the driver to actually use the driver. \\\
-URL:=http://hostap.epitest.fi/
-VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+  $(call Package/kmod-hostap/Default)
+  DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT
+  TITLE:=Host AP support for Prism2/2.5/3
+  DESCRIPTION+=\\\
+       \\\
+       This package contains the base Host AP driver code that is shared by \\\
+       different hardware models. You will also need to enable support for \\\
+       PLX/PCI/CS version of the driver to actually use the driver.

 endef
 
 define Package/kmod-hostap-pci
 endef
 
 define Package/kmod-hostap-pci

-$(call Package/kmod-hostap)
-DEPENDS:=kmod-hostap
-TITLE:=Host AP driver for Prism2.5 PCI adaptors
-DESCRIPTION:=Host AP driver for Prism2.5 PCI adaptors
+  $(call Package/kmod-hostap/Default)
+  DEPENDS:=kmod-hostap
+  TITLE:=Host AP driver for PCI adaptors
+  DESCRIPTION+=\\\
+       \\\
+       This package contains the Host AP driver for Prism2.5 PCI adaptors.

 endef
 
 define Package/kmod-hostap-plx
 endef
 
 define Package/kmod-hostap-plx

-$(call Package/kmod-hostap)
-DEPENDS:=kmod-hostap
-TITLE:=Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
-DESCRIPTION:=Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors
+  $(call Package/kmod-hostap/Default)
+  DEPENDS:=kmod-hostap
+  TITLE:=Host AP driver for PLX9052 based PCI adaptors
+  DESCRIPTION+=\\\
+       \\\
+       This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
+       based PCI adaptors.

 endef
 
 endef
 

-
-define Build/Compile
+ifeq ($(KERNEL),2.4)
+  define Build/Compile

        $(MAKE) -C $(LINUX_DIR)/ \
                ARCH="$(LINUX_KARCH)" \
                CROSS_COMPILE="$(TARGET_CROSS)" \
                SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
                modules
        $(MAKE) -C $(LINUX_DIR)/ \
                ARCH="$(LINUX_KARCH)" \
                CROSS_COMPILE="$(TARGET_CROSS)" \
                SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
                modules

-endef
+  endef

 
 

-define Package/kmod-hostap/install
+  define Package/kmod-hostap/install

        install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
        $(CP) \
                $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
        install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
        $(CP) \
                $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \


@@ -65,21 +85,54 @@ define Package/kmod-hostap/install
                $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
                $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
                $(1)/lib/modules/$(LINUX_VERSION)/
                $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
                $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
                $(1)/lib/modules/$(LINUX_VERSION)/

-endef
+  endef

 
 

-define Package/kmod-hostap-pci/install
+  define Package/kmod-hostap-pci/install

        install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
        $(CP) \
                $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
                $(1)/lib/modules/$(LINUX_VERSION)/
        install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
        $(CP) \
                $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
                $(1)/lib/modules/$(LINUX_VERSION)/

-endef
+  endef

 
 

-define Package/kmod-hostap-plx/install
+  define Package/kmod-hostap-plx/install

        install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
        $(CP) \
                $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
                $(1)/lib/modules/$(LINUX_VERSION)/
        install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
        $(CP) \
                $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
                $(1)/lib/modules/$(LINUX_VERSION)/

-endef
+  endef
+endif
+
+ifeq ($(KERNEL),2.6)
+  define Build/Compile
+  endef
+  
+ifeq ($(CONFIG_HOSTAP),m)
+  define Package/kmod-hostap/install
+       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
+       $(CP) \
+               $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) \
+               $(1)/lib/modules/$(LINUX_VERSION)/
+  endef
+endif
+
+ifeq ($(CONFIG_HOSTAP_PCI),m)
+  define Package/kmod-hostap-pci/install
+       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
+       $(CP) \
+               $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) \
+               $(1)/lib/modules/$(LINUX_VERSION)/
+  endef
+endif
+
+ifeq ($(CONFIG_HOSTAP_PLX),m)
+  define Package/kmod-hostap-plx/install
+       install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
+       $(CP) \
+               $(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) \
+               $(1)/lib/modules/$(LINUX_VERSION)/
+  endef
+endif
+endif

 
 $(eval $(call BuildPackage,kmod-hostap))
 $(eval $(call BuildPackage,kmod-hostap-pci))
 
 $(eval $(call BuildPackage,kmod-hostap))
 $(eval $(call BuildPackage,kmod-hostap-pci))